From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-Id: <20111102221453.038714288@clark.kroah.org> Date: Wed, 02 Nov 2011 15:13:58 -0700 From: Greg KH To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk, Michal Sroczynski Subject: [032/107] USB: PL2303: correctly handle baudrates above 115200 In-Reply-To: <20111102221600.GA26650@kroah.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: 2.6.32-longterm review patch. If anyone has any objections, please let us know. ------------------ From: Michal Sroczynski commit 8d48fdf689fed2c73c493e5146d1463689246442 upstream. PL2303: correctly handle baudrates above 115200 Signed-off-by: Michal Sroczynski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -617,10 +617,28 @@ static void pl2303_set_termios(struct tt baud = 6000000; } dbg("%s - baud set = %d", __func__, baud); - buf[0] = baud & 0xff; - buf[1] = (baud >> 8) & 0xff; - buf[2] = (baud >> 16) & 0xff; - buf[3] = (baud >> 24) & 0xff; + if (baud <= 115200) { + buf[0] = baud & 0xff; + buf[1] = (baud >> 8) & 0xff; + buf[2] = (baud >> 16) & 0xff; + buf[3] = (baud >> 24) & 0xff; + } else { + /* apparently the formula for higher speeds is: + * baudrate = 12M * 32 / (2^buf[1]) / buf[0] + */ + unsigned tmp = 12*1000*1000*32 / baud; + buf[3] = 0x80; + buf[2] = 0; + buf[1] = (tmp >= 256); + while (tmp >= 256) { + tmp >>= 2; + buf[1] <<= 1; + } + if (tmp > 256) { + tmp %= 256; + } + buf[0] = tmp; + } } /* For reference buf[4]=0 is 1 stop bits */