From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-Id: <20111102221455.079179285@clark.kroah.org> Date: Wed, 02 Nov 2011 15:14:20 -0700 From: Greg KH To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk, Anton Blanchard , Brian King , James Bottomley Subject: [054/107] [SCSI] ipr: Always initiate hard reset in kdump kernel In-Reply-To: <20111102221600.GA26650@kroah.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: 2.6.32-longterm review patch. If anyone has any objections, please let us know. ------------------ From: Anton Blanchard commit 5d7c20b7fa5c6ca19e871b4050e321c99d32bd43 upstream. During kdump testing I noticed timeouts when initialising each IPR adapter. While the driver has logic to detect an adapter in an indeterminate state, it wasn't triggering and each adapter went through a 5 minute timeout before finally going operational. Some analysis showed the needs_hard_reset flag wasn't getting set. We can check the reset_devices kernel parameter which is set by kdump and force a full reset. This fixes the problem. Signed-off-by: Anton Blanchard Acked-by: Brian King Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/ipr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -7668,7 +7668,7 @@ static int __devinit ipr_probe_ioa(struc uproc = readl(ioa_cfg->regs.sense_uproc_interrupt_reg); if ((mask & IPR_PCII_HRRQ_UPDATED) == 0 || (uproc & IPR_UPROCI_RESET_ALERT)) ioa_cfg->needs_hard_reset = 1; - if (interrupts & IPR_PCII_ERROR_INTERRUPTS) + if ((interrupts & IPR_PCII_ERROR_INTERRUPTS) || reset_devices) ioa_cfg->needs_hard_reset = 1; if (interrupts & IPR_PCII_IOA_UNIT_CHECKED) ioa_cfg->ioa_unit_checked = 1;