From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org,
alan@lxorguk.ukuu.org.uk
Subject: [00/53] 3.0.11-stable review
Date: Tue, 22 Nov 2011 16:24:19 -0800 [thread overview]
Message-ID: <20111123002419.GA8531@kroah.com> (raw)
This is the start of the stable review cycle for the 3.0.11 release.
There are 53 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let us know. If anyone is a maintainer of the proper subsystem, and
wants to add a Signed-off-by: line to the patch, please respond with it.
Responses should be made by Friday, November 25, 2011, 20:00:00 UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.0.11-rc1.gz
and the diffstat can be found below.
thanks,
greg k-h
Makefile | 4 +-
arch/arm/kernel/head.S | 2 +-
drivers/base/core.c | 3 +
drivers/base/node.c | 14 +++---
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/i915_reg.h | 9 ++++
drivers/gpu/drm/i915/i915_suspend.c | 2 +
drivers/gpu/drm/i915/intel_display.c | 42 +++++++++++++++--
drivers/media/video/saa7164/saa7164-cards.c | 66 +++++++++++++++++++++++++++
drivers/media/video/saa7164/saa7164-dvb.c | 1 +
drivers/media/video/saa7164/saa7164.h | 1 +
drivers/misc/Kconfig | 15 +++---
drivers/misc/pch_phub.c | 22 +++++++++-
drivers/misc/spear13xx_pcie_gadget.c | 2 +-
drivers/net/wireless/libertas/if_spi.c | 1 +
drivers/net/wireless/rt2x00/rt2x00.h | 1 +
drivers/net/wireless/rt2x00/rt2x00dev.c | 22 ++++++++-
drivers/scsi/aacraid/linit.c | 4 ++
drivers/scsi/hpsa.c | 5 ++
drivers/scsi/scsi_scan.c | 6 +--
drivers/tty/hvc/hvc_dcc.c | 2 +
drivers/tty/serial/Kconfig | 14 +++---
drivers/tty/serial/pch_uart.c | 13 +++++-
drivers/tty/tty_ldisc.c | 30 +++++++++---
drivers/usb/class/cdc-acm.c | 8 ++-
drivers/usb/core/hub.c | 6 +++
drivers/usb/core/quirks.c | 27 +++++++++++
drivers/usb/host/ehci-sched.c | 15 ++++--
drivers/usb/host/pci-quirks.c | 7 +--
drivers/usb/host/xhci-mem.c | 5 --
drivers/usb/host/xhci-ring.c | 13 +++---
drivers/usb/host/xhci.c | 34 +++++++-------
drivers/usb/serial/ark3116.c | 10 ++--
drivers/usb/serial/ftdi_sio.c | 14 +++++-
drivers/usb/serial/option.c | 23 +++++++++
drivers/usb/serial/pl2303.c | 1 -
drivers/usb/serial/pl2303.h | 4 --
drivers/usb/storage/protocol.c | 7 +--
fs/nfs/dir.c | 2 +-
fs/nfs/file.c | 32 +++++++++++++
fs/nfs/inode.c | 2 +-
fs/nfs/nfs3proc.c | 1 +
fs/nfs/nfs4proc.c | 1 +
fs/nfs/proc.c | 1 +
fs/xfs/linux-2.6/xfs_buf.h | 1 -
fs/xfs/linux-2.6/xfs_file.c | 34 +++++++++++---
fs/xfs/linux-2.6/xfs_iops.c | 16 +++++--
fs/xfs/linux-2.6/xfs_super.c | 34 ++++----------
fs/xfs/quota/xfs_qm.c | 3 +-
fs/xfs/xfs_buf_item.c | 1 -
fs/xfs/xfs_mount.c | 29 ++++--------
fs/xfs/xfs_vnodeops.c | 14 ++++--
include/linux/nfs_fs.h | 3 +
include/linux/nfs_xdr.h | 1 +
kernel/irq/spurious.c | 2 +-
net/ipv6/ip6_tunnel.c | 8 +++-
net/mac80211/rx.c | 9 +++-
net/mac80211/util.c | 4 ++
net/wireless/nl80211.c | 3 +-
net/wireless/reg.c | 3 +
60 files changed, 488 insertions(+), 172 deletions(-)
next reply other threads:[~2011-11-23 0:24 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-23 0:24 Greg KH [this message]
2011-11-23 0:23 ` [01/53] genirq: Fix irqfixup, irqpoll regression Greg KH
2011-11-23 0:23 ` [02/53] [SCSI] fix WARNING: at drivers/scsi/scsi_lib.c:1704 Greg KH
2011-11-23 0:23 ` [03/53] [SCSI] hpsa: Disable ASPM Greg KH
2011-11-23 0:23 ` [04/53] [SCSI] aacraid: controller hangs if kernel uses non-default ASPM policy Greg KH
2011-11-23 0:23 ` [05/53] [media] saa7164: Add support for another HVR2200 hardware revision Greg KH
2011-11-23 0:23 ` [06/53] drm/i915/pch: Save/restore PCH_PORT_HOTPLUG across suspend Greg KH
2011-11-23 0:23 ` [07/53] ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ Greg KH
2011-11-23 0:23 ` [08/53] Net, libertas: Resolve memory leak in if_spi_host_to_card() Greg KH
2011-11-23 0:23 ` [09/53] rt2x00: Fix sleep-while-atomic bug in powersaving code Greg KH
2011-11-23 0:23 ` [10/53] mac80211: fix NULL dereference in radiotap code Greg KH
2011-11-23 0:23 ` [11/53] mac80211: fix bug in ieee80211_build_probe_req Greg KH
2011-11-23 0:23 ` [12/53] nl80211: fix HT capability attribute validation Greg KH
2011-11-23 0:23 ` [13/53] cfg80211: fix bug on regulatory core exit on access to last_request Greg KH
2011-11-23 0:23 ` [14/53] ip6_tunnel: copy parms.name after register_netdevice Greg KH
2011-11-23 0:23 ` [15/53] PM / driver core: disable devices runtime PM during shutdown Greg KH
2011-11-23 0:23 ` [16/53] pch_phub: Support new device LAPIS Semiconductor ML7831 IOH Greg KH
2011-11-23 0:23 ` [17/53] pch_phub: Fix MAC address writing issue for LAPIS ML7831 Greg KH
2011-11-23 0:23 ` [18/53] pch_uart: Fix hw-flow control issue Greg KH
2011-11-23 0:23 ` [19/53] pch_uart: Fix DMA resource leak issue Greg KH
2011-11-23 0:23 ` [20/53] pch_uart: Support new device LAPIS Semiconductor ML7831 IOH Greg KH
2011-11-23 0:23 ` [21/53] tty: hvc_dcc: Fix duplicate character inputs Greg KH
2011-11-23 0:23 ` [22/53] TTY: ldisc, allow waiting for ldisc arbitrarily long Greg KH
2011-11-23 0:23 ` [23/53] TTY: ldisc, move wait idle to caller Greg KH
2011-11-23 0:23 ` [24/53] TTY: ldisc, wait for ldisc infinitely in hangup Greg KH
2011-11-23 0:23 ` [25/53] nfs: when attempting to open a directory, fall back on normal lookup (try #5) Greg KH
2011-11-23 0:23 ` [26/53] pcie-gadget-spear: Add "platform:" prefix for platform modalias Greg KH
2011-11-23 0:23 ` [27/53] drivers/base/node.c: fix compilation error with older versions of gcc Greg KH
2011-11-23 0:23 ` [28/53] xhci: Set slot and ep0 flags for address command Greg KH
2011-11-23 0:23 ` [29/53] usb, xhci: Clear warm reset change event during init Greg KH
2011-11-23 0:23 ` [30/53] usb, xhci: fix lockdep warning on endpoint timeout Greg KH
2011-11-23 0:23 ` [31/53] USB: XHCI: resume root hubs when the controller resumes Greg KH
2011-11-23 0:23 ` [32/53] USB: option: release new PID for ZTE 3G modem Greg KH
2011-11-23 0:23 ` [33/53] USB: option: add PID of Huawei E173s " Greg KH
2011-11-23 0:23 ` [34/53] USB: serial: pl2303: rm duplicate id Greg KH
2011-11-23 0:23 ` [35/53] USB: cdc-acm: Fix disconnect() vs close() race Greg KH
2011-11-23 0:23 ` [36/53] USB: workaround for bug in old version of GCC Greg KH
2011-11-23 0:23 ` [37/53] USB: ark3116 initialisation fix Greg KH
2011-11-23 0:23 ` [38/53] USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c Greg KH
2011-11-23 0:23 ` [39/53] usb-storage: Accept 8020i-protocol commands longer than 12 bytes Greg KH
2011-11-23 0:23 ` [40/53] USB: EHCI: fix HUB TT scheduling issue with iso transfer Greg KH
2011-11-23 0:23 ` [41/53] USB: add quirk for Logitech C600 web cam Greg KH
2011-11-23 0:23 ` [42/53] USB: quirks: adding more quirky webcams to avoid squeaky audio Greg KH
2011-11-23 0:23 ` [43/53] xfs: fix error handling for synchronous writes Greg KH
2011-11-23 0:23 ` [44/53] xfs: fix xfs_mark_inode_dirty during umount Greg KH
2011-11-23 0:23 ` [45/53] xfs: dont serialise direct IO reads on page cache Greg KH
2011-11-23 0:23 ` [46/53] xfs: avoid direct I/O write vs buffered I/O race Greg KH
2011-11-23 0:23 ` [47/53] xfs: Return -EIO when xfs_vn_getattr() failed Greg KH
2011-11-23 0:23 ` [48/53] xfs: fix buffer flushing during unmount Greg KH
2011-11-23 0:23 ` [49/53] xfs: Fix possible memory corruption in xfs_readlink Greg KH
2011-11-23 0:23 ` [50/53] xfs: use doalloc flag in xfs_qm_dqattach_one() Greg KH
2011-11-23 0:23 ` [51/53] xfs: fix ->write_inode return values Greg KH
2011-11-23 0:23 ` [52/53] drm/i915: fix IVB cursor support Greg KH
2011-11-23 0:24 ` [53/53] drm/i915: always set FDI composite sync bit Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111123002419.GA8531@kroah.com \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).