From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-Id: <20120123234026.156646688@clark.kroah.org> Date: Mon, 23 Jan 2012 15:39:24 -0800 From: Greg KH To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk, Girish K S , Subhash Jadavani , Philip Rakity , Chris Ball Subject: [38/90] mmc: core: Fix voltage select in DDR mode In-Reply-To: <20120123234211.GA19504@kroah.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: 3.0-stable review patch. If anyone has any objections, please let me know. ------------------ From: Girish K S commit 913047e9e5787a90696533a9f109552b7694ecc9 upstream. This patch fixes the wrong comparison before setting the interface voltage in DDR mode. The assignment to the variable ddr before comaprison is either ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the comparison is done with the extended csd value if ddr == EXT_CSD_CARD_TYPE_DDR_1_2V. Signed-off-by: Girish K S Acked-by: Subhash Jadavani Acked-by: Philip Rakity Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/core/mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -830,7 +830,7 @@ static int mmc_init_card(struct mmc_host * * WARNING: eMMC rules are NOT the same as SD DDR */ - if (ddr == EXT_CSD_CARD_TYPE_DDR_1_2V) { + if (ddr == MMC_1_2V_DDR_MODE) { err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0); if (err)