From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-Id: <20120309190203.308535206@linuxfoundation.org> Date: Fri, 09 Mar 2012 11:02:14 -0800 From: Greg KH To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk, Wolfram Sang , Shawn Guo , Marek Vasut , =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Subject: [ 12/95] i2c: mxs: only flag completion when queue is completely done In-Reply-To: <20120309194424.GA2134@kroah.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: 3.2-stable review patch. If anyone has any objections, please let me know. ------------------ From: Wolfram Sang commit 844990daa2e69a4258049ba9c2bae1180657dac3 upstream. The hardware generates an interrupt for every completed command in the queue while the code assumed that it will only generate one interrupt when the queue is empty. So, explicitly check if the queue is really empty. This patch fixed problems which occurred due to high traffic on the bus. While we are here, move the completion-initialization after the parameter error checking. Signed-off-by: Wolfram Sang Cc: Shawn Guo Cc: Marek Vasut Cc: Lothar Waßmann Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-mxs.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -72,6 +72,7 @@ #define MXS_I2C_QUEUESTAT (0x70) #define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000 +#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F #define MXS_I2C_QUEUECMD (0x80) @@ -219,14 +220,14 @@ static int mxs_i2c_xfer_msg(struct i2c_a int ret; int flags; - init_completion(&i2c->cmd_complete); - dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", msg->addr, msg->len, msg->flags, stop); if (msg->len == 0) return -EINVAL; + init_completion(&i2c->cmd_complete); + flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; if (msg->flags & I2C_M_RD) @@ -286,6 +287,7 @@ static irqreturn_t mxs_i2c_isr(int this_ { struct mxs_i2c_dev *i2c = dev_id; u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK; + bool is_last_cmd; if (!stat) return IRQ_NONE; @@ -300,9 +302,14 @@ static irqreturn_t mxs_i2c_isr(int this_ else i2c->cmd_err = 0; - complete(&i2c->cmd_complete); + is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & + MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; + + if (is_last_cmd || i2c->cmd_err) + complete(&i2c->cmd_complete); writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR); + return IRQ_HANDLED; }