From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-Id: <20120309190216.814017914@linuxfoundation.org> Date: Fri, 09 Mar 2012 11:02:37 -0800 From: Greg KH To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk, Sascha Hauer , Shawn Guo , Chris Ball Subject: [ 23/68] mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5 In-Reply-To: <20120309194409.GA2069@kroah.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: 3.0-stable review patch. If anyone has any objections, please let me know. ------------------ From: Sascha Hauer commit 5b6b0ad6e572b32a641116aaa5f897ffebe31e44 upstream. On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION command. This works for SD cards. However, with MMC cards the MMC_SET_BLOCK_COUNT command is used instead, but this needs the same handling. Fix MMC cards by testing for the MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53 board with a Transcend MMC+ card and eMMC. The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this is a regression for these boards introduced in 3.0; it should go to 3.0/3.1/3.2-stable. Signed-off-by: Sascha Hauer Acked-by: Shawn Guo Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/host/sdhci-esdhc-imx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -139,8 +139,9 @@ static void esdhc_writew_le(struct sdhci imx_data->scratchpad = val; return; case SDHCI_COMMAND: - if ((host->cmd->opcode == MMC_STOP_TRANSMISSION) - && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + if ((host->cmd->opcode == MMC_STOP_TRANSMISSION || + host->cmd->opcode == MMC_SET_BLOCK_COUNT) && + (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) val |= SDHCI_CMD_ABORTCMD; writel(val << 16 | imx_data->scratchpad, host->ioaddr + SDHCI_TRANSFER_MODE);