From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-Id: <20120411231308.217681232@linuxfoundation.org> Date: Wed, 11 Apr 2012 16:13:12 -0700 From: Greg KH To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk, Artem Bityutskiy , Joern Engel , David Woodhouse Subject: [ 05/42] mtd: block2mtd: initialize writebufsize In-Reply-To: <20120411231443.GA808@kroah.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: 3.0-stable review patch. If anyone has any objections, please let me know. ------------------ From: Artem Bityutskiy commit b604387411ec6a072e95910099262616edd2bd2f upstream. The writebufsize concept was introduce by commit "0e4ca7e mtd: add writebufsize field to mtd_info struct" and it represents the maximum amount of data the device writes to the media at a time. This is an important parameter for UBIFS which is used during recovery and which basically defines how big a corruption caused by a power cut can be. However, we forgot to set this parameter for block2mtd. Set it to PAGE_SIZE because this is actually the amount of data we write at a time. Signed-off-by: Artem Bityutskiy Acked-by: Joern Engel Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman --- drivers/mtd/devices/block2mtd.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -284,6 +284,7 @@ static struct block2mtd_dev *add_device( dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK; dev->mtd.erasesize = erase_size; dev->mtd.writesize = 1; + dev->mtd.writebufsize = PAGE_SIZE; dev->mtd.type = MTD_RAM; dev->mtd.flags = MTD_CAP_RAM; dev->mtd.erase = block2mtd_erase;