From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org,
alan@lxorguk.ukuu.org.uk, Adam Jackson <ajax@redhat.com>,
Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [ 06/75] drm/i915: properly compute dp dithering for user-created modes
Date: Thu, 19 Apr 2012 14:03:09 -0700 [thread overview]
Message-ID: <20120419210303.657294605@linuxfoundation.org> (raw)
In-Reply-To: <20120419210322.GA6478@kroah.com>
3.3-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Vetter <daniel.vetter@ffwll.ch>
commit c4867936474183332db4c19791a65fdad6474fd5 upstream.
We've only computed whether we need to fall back to 6bpc due to dp
link bandwidth constrains in mode_valid, but not mode_fixup. Under
various circumstances X likes to create new modes which then lack
proper 6bpc flags (if required), resulting in mode_fixup failures and
ultimately black screens.
Chris Wilson pointed out that we still get things wrong for bpp > 24,
but that should be fixed in another patch (and it'll be easier because
this patch consolidates the logic).
The likely culprit for this regression is
commit 3d794f87238f74d80e78a7611c7fbde8a54c85c2
Author: Keith Packard <keithp@keithp.com>
Date: Wed Jan 25 08:16:25 2012 -0800
drm/i915: Force explicit bpp selection for intel_dp_link_required
v2: Fix indentation and tune down the too bold claim that this should
fix the world. Both noticed by Chris Wilson.
v3: Try to really git add things.
Reported-and-tested-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48170
Cc: stable@kernel.org
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/intel_dp.c | 49 ++++++++++++++++++++++++++++------------
1 file changed, 35 insertions(+), 14 deletions(-)
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -219,14 +219,38 @@ intel_dp_max_data_rate(int max_link_cloc
return (max_link_clock * max_lanes * 8) / 10;
}
+static bool
+intel_dp_adjust_dithering(struct intel_dp *intel_dp,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
+ int max_lanes = intel_dp_max_lane_count(intel_dp);
+ int max_rate, mode_rate;
+
+ mode_rate = intel_dp_link_required(mode->clock, 24);
+ max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
+
+ if (mode_rate > max_rate) {
+ mode_rate = intel_dp_link_required(mode->clock, 18);
+ if (mode_rate > max_rate)
+ return false;
+
+ if (adjusted_mode)
+ adjusted_mode->private_flags
+ |= INTEL_MODE_DP_FORCE_6BPC;
+
+ return true;
+ }
+
+ return true;
+}
+
static int
intel_dp_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
- int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
- int max_lanes = intel_dp_max_lane_count(intel_dp);
- int max_rate, mode_rate;
if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay)
@@ -236,16 +260,8 @@ intel_dp_mode_valid(struct drm_connector
return MODE_PANEL;
}
- mode_rate = intel_dp_link_required(mode->clock, 24);
- max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
-
- if (mode_rate > max_rate) {
- mode_rate = intel_dp_link_required(mode->clock, 18);
- if (mode_rate > max_rate)
- return MODE_CLOCK_HIGH;
- else
- mode->private_flags |= INTEL_MODE_DP_FORCE_6BPC;
- }
+ if (!intel_dp_adjust_dithering(intel_dp, mode, NULL))
+ return MODE_CLOCK_HIGH;
if (mode->clock < 10000)
return MODE_CLOCK_LOW;
@@ -673,7 +689,7 @@ intel_dp_mode_fixup(struct drm_encoder *
int lane_count, clock;
int max_lane_count = intel_dp_max_lane_count(intel_dp);
int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
- int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24;
+ int bpp;
static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
@@ -687,6 +703,11 @@ intel_dp_mode_fixup(struct drm_encoder *
mode->clock = intel_dp->panel_fixed_mode->clock;
}
+ if (!intel_dp_adjust_dithering(intel_dp, mode, adjusted_mode))
+ return false;
+
+ bpp = adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24;
+
for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
next prev parent reply other threads:[~2012-04-19 21:03 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-19 21:03 [ 00/75] 3.3.3-stable review Greg KH
2012-04-19 21:03 ` [ 01/75] Btrfs: fix regression in scrub path resolving Greg KH
2012-04-19 21:03 ` [ 02/75] drm/radeon/kms: fix DVO setup on some r4xx chips Greg KH
2012-04-19 21:03 ` [ 03/75] drm/i915: Removed IVB forced enable of sprite dest key Greg KH
2012-04-19 21:03 ` [ 04/75] drm/i915/ringbuffer: Exclude last 2 cachlines of ring on 845g Greg KH
2012-04-19 21:03 ` [ 05/75] drm/radeon: only add the mm i2c bus if the hw_i2c module param is set Greg KH
2012-04-19 21:03 ` Greg KH [this message]
2012-04-19 21:03 ` [ 07/75] drm/i915: make rc6 module parameter read-only Greg KH
2012-04-19 21:03 ` [ 08/75] rtlwifi: Preallocate USB read buffers and eliminate kalloc in read routine Greg KH
2012-04-19 21:03 ` [ 09/75] rtlwifi: Add missing DMA buffer unmapping for PCI drivers Greg KH
2012-04-19 21:03 ` [ 10/75] ARM: 7379/1: DT: fix atags_to_fdt() second call site Greg KH
2012-04-19 21:03 ` [ 11/75] ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE Greg KH
2012-04-19 21:03 ` [ 12/75] md/raid1,raid10: Fix calculation of vcnt when processing error recovery Greg KH
2012-04-19 21:03 ` [ 13/75] md/bitmap: prevent bitmap_daemon_work running while initialising bitmap Greg KH
2012-04-19 21:03 ` [ 14/75] [PATCH] Bluetooth: uart-ldisc: Fix memory leak Greg KH
2012-04-19 21:03 ` [ 15/75] Bluetooth: hci_ldisc: fix NULL-pointer dereference on tty_close Greg KH
2012-04-19 21:03 ` [ 16/75] Bluetooth: hci_core: fix NULL-pointer dereference at unregister Greg KH
2012-04-19 21:03 ` [ 17/75] Bluetooth: Remove unneeded locking Greg KH
2012-04-19 21:03 ` [ 18/75] Revert "Btrfs: increase the global block reserve estimates" Greg KH
2012-04-19 21:03 ` [ 19/75] ALSA: hda/realtek - Add a fixup entry for Acer Aspire 8940G Greg KH
2012-04-19 21:03 ` [ 20/75] ext4: address scalability issue by removing extent cache statistics Greg KH
2012-04-19 21:03 ` [ 21/75] ia64: fix futex_atomic_cmpxchg_inatomic() Greg KH
2012-04-19 21:03 ` [ 22/75] panic: fix stack dump print on direct call to panic() Greg KH
2012-04-19 21:03 ` [ 23/75] drivers/rtc/rtc-pl031.c: enable clock on all ST variants Greg KH
2012-04-19 21:03 ` [ 24/75] hugetlb: fix race condition in hugetlb_fault() Greg KH
2012-04-19 21:03 ` [ 25/75] staging: iio: hmc5843: Fix crash in probe function Greg KH
2012-04-19 21:03 ` [ 26/75] Revert "serial/8250_pci: init-quirk msi support for kt serial controller" Greg KH
2012-04-19 21:03 ` [ 27/75] serial: samsung: fix omission initialize ulcon in reset port fn() Greg KH
2012-04-19 21:03 ` [ 28/75] Revert "serial/8250_pci: setup-quirk workaround for the kt serial controller" Greg KH
2012-04-19 21:03 ` [ 29/75] serial/8250_pci: add a "force background timer" flag and use it for the "kt" serial port Greg KH
2012-04-19 21:03 ` [ 30/75] tty: serial: altera_uart: Check for NULL platform_data in probe Greg KH
2012-04-19 21:03 ` [ 31/75] sparc64: Eliminate obsolete __handle_softirq() function Greg KH
2012-04-19 21:03 ` [ 32/75] sparc64: Fix bootup crash on sun4v Greg KH
2012-04-19 21:03 ` [ 33/75] cciss: Initialize scsi host max_sectors for tape drive support Greg KH
2012-04-19 21:03 ` [ 34/75] cciss: Fix scsi tape io with more than 255 scatter gather elements Greg KH
2012-04-19 21:03 ` [ 35/75] perf hists: Catch and handle out-of-date hist entry maps Greg KH
2012-04-19 21:03 ` [ 36/75] video:uvesafb: Fix oops that uvesafb try to execute NX-protected page Greg KH
2012-04-19 21:03 ` [ 37/75] IB/srpt: Set srq_type to IB_SRQT_BASIC Greg KH
2012-04-19 21:03 ` [ 38/75] nohz: Fix stale jiffies update in tick_nohz_restart() Greg KH
2012-04-19 21:03 ` [ 39/75] pch_uart: Fix MSI setting issue Greg KH
2012-04-19 21:03 ` [ 40/75] x86: Use correct byte-sized register constraint in __xchg_op() Greg KH
2012-04-19 21:03 ` [ 41/75] x86: Use correct byte-sized register constraint in __add() Greg KH
2012-04-19 21:03 ` [ 42/75] USB: serial: fix race between probe and open Greg KH
2012-04-19 21:03 ` [ 43/75] USB: pl2303: fix DTR/RTS being raised on baud rate change Greg KH
2012-04-19 21:03 ` [ 44/75] USB: option: re-add NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED to option_id array Greg KH
2012-04-19 21:03 ` [ 45/75] USB: ftdi_sio: fix status line change handling for TIOCMIWAIT and TIOCGICOUNT Greg KH
2012-04-19 21:03 ` [ 46/75] USB: ftdi_sio: fix race condition in TIOCMIWAIT, and abort of TIOCMIWAIT when the device is removed Greg KH
2012-04-19 21:03 ` [ 47/75] USB: sierra: add support for Sierra Wireless MC7710 Greg KH
2012-04-19 21:03 ` [ 48/75] USB: dont clear urb->dev in scatter-gather library Greg KH
2012-04-19 21:03 ` [ 49/75] USB: dont ignore suspend errors for root hubs Greg KH
2012-04-19 21:03 ` [ 50/75] xhci: dont re-enable IE constantly Greg KH
2012-04-19 21:03 ` [ 51/75] xhci: Dont write zeroed pointers to xHC registers Greg KH
2012-04-19 21:03 ` [ 52/75] xhci: Restore event ring dequeue pointer on resume Greg KH
2012-04-19 21:03 ` [ 53/75] USB: fix bug of device descriptor got from superspeed device Greg KH
2012-04-19 21:03 ` [ 54/75] xHCI: add XHCI_RESET_ON_RESUME quirk for VIA xHCI host Greg KH
2012-04-19 21:03 ` [ 55/75] xHCI: Correct the #define XHCI_LEGACY_DISABLE_SMI Greg KH
2012-04-19 21:03 ` [ 56/75] [S390] fix tlb flushing for page table pages Greg KH
2012-04-19 21:04 ` [ 57/75] memcg: fix Bad page state after replace_page_cache Greg KH
2012-04-19 21:04 ` [ 58/75] serial: PL011: clear pending interrupts Greg KH
2012-04-19 21:04 ` [ 59/75] serial: PL011: move interrupt clearing Greg KH
2012-04-19 21:04 ` [ 60/75] fcaps: clear the same personality flags as suid when fcaps are used Greg KH
2012-04-19 21:04 ` [ 61/75] xhci: Fix register save/restore order Greg KH
2012-04-19 21:04 ` [ 62/75] usb: gadget: pch_udc: Fix disconnect issue Greg KH
2012-04-19 21:04 ` [ 63/75] usb: gadget: pch_udc: Fix wrong return value Greg KH
2012-04-19 21:04 ` [ 64/75] usb: gadget: pch_udc: Fix USB suspend issue Greg KH
2012-04-19 21:04 ` [ 65/75] usb: gadget: pch_udc: Fix usb/gadget/pch_udc: Fix ether gadget connect/disconnect issue Greg KH
2012-04-19 21:04 ` [ 66/75] usb: gadget: pch_udc: Reduce redundant interrupt Greg KH
2012-04-19 21:04 ` [ 67/75] security: fix compile error in commoncap.c Greg KH
2012-04-19 21:04 ` [ 68/75] spi-topcliff-pch: fix -Wuninitialized warning Greg KH
2012-04-19 21:04 ` [ 69/75] Bluetooth: Adding USB device 13d3:3375 as an Atheros AR3012 Greg KH
2012-04-19 21:04 ` [ 70/75] Bluetooth: Add Atheros maryann PIDVID support Greg KH
2012-04-19 21:04 ` [ 71/75] futex: Do not leak robust list to unprivileged process Greg KH
2012-04-19 21:04 ` [ 72/75] drm/i915: Hold mode_config lock whilst changing mode for lastclose() Greg KH
2012-04-19 21:04 ` [ 73/75] drm/radeon/kms: fix the regression of DVI connector check Greg KH
2012-04-19 21:04 ` [ 74/75] drm/radeon: disable MSI on RV515 Greg KH
2012-04-19 21:04 ` [ 75/75] drm/radeon: fix load detect on rn50 with hardcoded EDIDs Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120419210303.657294605@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=ajax@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=daniel.vetter@ffwll.ch \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).