From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org,
alan@lxorguk.ukuu.org.uk, Tomoya MORINAGA <tomoya.rohm@gmail.com>,
Vinod Koul <vinod.koul@linux.intel.com>
Subject: [ 52/59] pch_dma: Support new device LAPIS Semiconductor ML7831 IOH
Date: Thu, 19 Apr 2012 14:07:03 -0700 [thread overview]
Message-ID: <20120419210615.579966254@linuxfoundation.org> (raw)
In-Reply-To: <20120419210623.GA12156@kroah.com>
3.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomoya MORINAGA <tomoya.rohm@gmail.com>
commit ca7fe2db892dcf91b2c72ee352eda4ff867903a7 upstream.
ML7831 is companion chip for Intel Atom E6xx series.
Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/dma/Kconfig | 13 ++++++-------
drivers/dma/pch_dma.c | 8 ++++++--
2 files changed, 12 insertions(+), 9 deletions(-)
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -200,18 +200,17 @@ config PL330_DMA
platform_data for a dma-pl330 device.
config PCH_DMA
- tristate "Intel EG20T PCH / OKI Semi IOH(ML7213/ML7223) DMA support"
+ tristate "Intel EG20T PCH / OKI Semi IOH(ML7213/ML7223/ML7831) DMA support"
depends on PCI && X86
select DMA_ENGINE
help
Enable support for Intel EG20T PCH DMA engine.
-
This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7213 and ML7223.
- ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
- for MP(Media Phone) use.
- ML7213/ML7223 is companion chip for Intel Atom E6xx series.
- ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+ Output Hub), ML7213, ML7223 and ML7831.
+ ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+ for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+ ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
config IMX_SDMA
tristate "i.MX SDMA support"
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -1021,6 +1021,8 @@ static void __devexit pch_dma_remove(str
#define PCI_DEVICE_ID_ML7223_DMA2_4CH 0x800E
#define PCI_DEVICE_ID_ML7223_DMA3_4CH 0x8017
#define PCI_DEVICE_ID_ML7223_DMA4_4CH 0x803B
+#define PCI_DEVICE_ID_ML7831_DMA1_8CH 0x8810
+#define PCI_DEVICE_ID_ML7831_DMA2_4CH 0x8815
DEFINE_PCI_DEVICE_TABLE(pch_dma_id_table) = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 },
@@ -1033,6 +1035,8 @@ DEFINE_PCI_DEVICE_TABLE(pch_dma_id_table
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA2_4CH), 4}, /* Video SPI */
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA3_4CH), 4}, /* Security */
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA4_4CH), 4}, /* FPGA */
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_DMA1_8CH), 8}, /* UART */
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_DMA2_4CH), 4}, /* SPI */
{ 0, },
};
@@ -1060,7 +1064,7 @@ static void __exit pch_dma_exit(void)
module_init(pch_dma_init);
module_exit(pch_dma_exit);
-MODULE_DESCRIPTION("Intel EG20T PCH / OKI SEMICONDUCTOR ML7213 IOH "
- "DMA controller driver");
+MODULE_DESCRIPTION("Intel EG20T PCH / OKI SEMICON ML7213/ML7223/ML7831 IOH"
+ "DMA controller driver");
MODULE_AUTHOR("Yong Wang <yong.y.wang@intel.com>");
MODULE_LICENSE("GPL v2");
next prev parent reply other threads:[~2012-04-19 21:07 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-19 21:06 [ 00/59] 3.0.29-stable review Greg KH
2012-04-19 21:06 ` [ 01/59] drm/i915/ringbuffer: Exclude last 2 cachlines of ring on 845g Greg KH
2012-04-19 21:06 ` [ 02/59] drm/radeon: only add the mm i2c bus if the hw_i2c module param is set Greg KH
2012-04-19 21:06 ` [ 03/59] rtlwifi: Add missing DMA buffer unmapping for PCI drivers Greg KH
2012-04-19 21:06 ` [ 04/59] ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE Greg KH
2012-04-19 21:06 ` [ 05/59] [PATCH] Bluetooth: uart-ldisc: Fix memory leak Greg KH
2012-04-19 21:06 ` [ 06/59] Bluetooth: hci_ldisc: fix NULL-pointer dereference on tty_close Greg KH
2012-04-19 21:06 ` [ 07/59] ia64: fix futex_atomic_cmpxchg_inatomic() Greg KH
2012-04-19 21:06 ` [ 08/59] drivers/rtc/rtc-pl031.c: enable clock on all ST variants Greg KH
2012-04-19 21:06 ` [ 09/59] hugetlb: fix race condition in hugetlb_fault() Greg KH
2012-04-19 21:06 ` [ 10/59] staging: iio: hmc5843: Fix crash in probe function Greg KH
2012-04-19 21:06 ` [ 11/59] tty: serial: altera_uart: Check for NULL platform_data in probe Greg KH
2012-04-19 21:06 ` [ 12/59] sparc64: Eliminate obsolete __handle_softirq() function Greg KH
2012-04-19 21:06 ` [ 13/59] sparc64: Fix bootup crash on sun4v Greg KH
2012-04-19 21:06 ` [ 14/59] cciss: Initialize scsi host max_sectors for tape drive support Greg KH
2012-04-19 21:06 ` [ 15/59] cciss: Fix scsi tape io with more than 255 scatter gather elements Greg KH
2012-04-19 21:06 ` [ 16/59] perf hists: Catch and handle out-of-date hist entry maps Greg KH
2012-04-19 21:06 ` [ 17/59] video:uvesafb: Fix oops that uvesafb try to execute NX-protected page Greg KH
2012-04-19 21:06 ` [ 18/59] nohz: Fix stale jiffies update in tick_nohz_restart() Greg KH
2012-04-19 21:06 ` [ 19/59] USB: serial: fix race between probe and open Greg KH
2012-04-19 21:06 ` [ 20/59] USB: pl2303: fix DTR/RTS being raised on baud rate change Greg KH
2012-04-19 21:06 ` [ 21/59] USB: option: re-add NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED to option_id array Greg KH
2012-04-19 21:06 ` [ 22/59] USB: sierra: add support for Sierra Wireless MC7710 Greg KH
2012-04-19 21:06 ` [ 23/59] USB: dont clear urb->dev in scatter-gather library Greg KH
2012-04-19 21:06 ` [ 24/59] xhci: dont re-enable IE constantly Greg KH
2012-04-19 21:06 ` [ 25/59] xhci: Dont write zeroed pointers to xHC registers Greg KH
2012-04-19 21:06 ` [ 26/59] xhci: Restore event ring dequeue pointer on resume Greg KH
2012-04-19 21:06 ` [ 27/59] xHCI: Correct the #define XHCI_LEGACY_DISABLE_SMI Greg KH
2012-04-19 21:06 ` [ 28/59] xHCI: add XHCI_RESET_ON_RESUME quirk for VIA xHCI host Greg KH
2012-04-19 21:06 ` [ 29/59] serial: PL011: clear pending interrupts Greg KH
2012-04-19 21:06 ` [ 30/59] serial: PL011: move interrupt clearing Greg KH
2012-04-19 21:06 ` [ 31/59] fcaps: clear the same personality flags as suid when fcaps are used Greg KH
2012-04-19 21:06 ` [ 32/59] [PATCH] ath9k: fix max noise floor threshold Greg KH
2012-04-19 21:06 ` [ 33/59] xhci: Fix register save/restore order Greg KH
2012-04-19 21:06 ` [ 34/59] Bluetooth: hci_core: fix NULL-pointer dereference at unregister Greg KH
2012-04-19 21:06 ` [ 35/59] pch_phub: Fix register miss-setting issue Greg KH
2012-04-19 21:06 ` [ 36/59] pch_phub: Care FUNCSEL register in PM Greg KH
2012-04-19 21:06 ` [ 37/59] pch_phub: Improve ADE(Address Decode Enable) control Greg KH
2012-04-19 21:06 ` [ 38/59] usb: gadget: pch_udc: Fix disconnect issue Greg KH
2012-04-19 21:06 ` [ 39/59] usb: gadget: pch_udc: Fix wrong return value Greg KH
2012-04-19 21:06 ` [ 40/59] usb: gadget: pch_udc: Fix USB suspend issue Greg KH
2012-04-19 21:06 ` [ 41/59] usb: gadget: pch_udc: Fix usb/gadget/pch_udc: Fix ether gadget connect/disconnect issue Greg KH
2012-04-19 21:06 ` [ 42/59] usb: gadget: pch_udc: Reduce redundant interrupt Greg KH
2012-04-19 21:06 ` [ 43/59] USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH Greg KH
2012-04-19 21:06 ` [ 44/59] ACPICA: Fix to allow region arguments to reference other scopes Greg KH
2012-04-19 21:06 ` [ 45/59] security: fix compile error in commoncap.c Greg KH
2012-04-19 21:06 ` [ 46/59] pch_uart: Set PCIe bus number using probe parameter Greg KH
2012-04-19 21:06 ` [ 47/59] 8250_pci: Fix kernel panic when pch_uart is disabled Greg KH
2012-04-19 21:06 ` [ 48/59] pch_dma: fix DMA issue(ch8-ch11) Greg KH
2012-04-19 21:07 ` [ 49/59] pch_dma: Fix channel locking Greg KH
2012-04-19 21:07 ` [ 50/59] pch_dma: Fix CTL register access issue Greg KH
2012-04-19 21:07 ` [ 51/59] pch_dma: Fix suspend issue Greg KH
2012-04-19 21:07 ` Greg KH [this message]
2012-04-19 21:07 ` [ 53/59] md/bitmap: prevent bitmap_daemon_work running while initialising bitmap Greg KH
2012-04-19 21:07 ` [ 54/59] Bluetooth: Adding USB device 13d3:3375 as an Atheros AR3012 Greg KH
2012-04-19 21:07 ` [ 55/59] Bluetooth: Add Atheros maryann PIDVID support Greg KH
2012-04-19 21:07 ` [ 56/59] futex: Do not leak robust list to unprivileged process Greg KH
2012-04-19 21:07 ` [ 57/59] drm/radeon/kms: fix the regression of DVI connector check Greg KH
2012-04-19 21:07 ` [ 58/59] drm/radeon: disable MSI on RV515 Greg KH
2012-04-19 21:07 ` [ 59/59] drm/radeon: fix load detect on rn50 with hardcoded EDIDs Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120419210615.579966254@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tomoya.rohm@gmail.com \
--cc=torvalds@linux-foundation.org \
--cc=vinod.koul@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).