From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org,
alan@lxorguk.ukuu.org.uk,
Shirish Pargaonkar <shirishpargaonkar@gmail.com>,
Jeff Layton <jlayton@redhat.com>,
Steve French <sfrench@us.ibm.com>
Subject: [ 06/47] cifs: fix oops while traversing open file list (try #4)
Date: Thu, 07 Jun 2012 13:14:04 +0900 [thread overview]
Message-ID: <20120607041359.080948991@linuxfoundation.org> (raw)
In-Reply-To: <20120607041504.GA13819@kroah.com>
3.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
commit 2c0c2a08bed7a3b791f88d09d16ace56acb3dd98 upstream.
While traversing the linked list of open file handles, if the identfied
file handle is invalid, a reopen is attempted and if it fails, we
resume traversing where we stopped and cifs can oops while accessing
invalid next element, for list might have changed.
So mark the invalid file handle and attempt reopen if no
valid file handle is found in rest of the list.
If reopen fails, move the invalid file handle to the end of the list
and start traversing the list again from the begining.
Repeat this four times before giving up and returning an error if
file reopen keeps failing.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/cifsglob.h | 1
fs/cifs/file.c | 57 ++++++++++++++++++++++++++++++-----------------------
2 files changed, 34 insertions(+), 24 deletions(-)
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -43,6 +43,7 @@
#define CIFS_MIN_RCV_POOL 4
+#define MAX_REOPEN_ATT 5 /* these many maximum attempts to reopen a file */
/*
* default attribute cache timeout (jiffies)
*/
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -973,10 +973,11 @@ struct cifsFileInfo *find_readable_file(
struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *cifs_inode,
bool fsuid_only)
{
- struct cifsFileInfo *open_file;
+ struct cifsFileInfo *open_file, *inv_file = NULL;
struct cifs_sb_info *cifs_sb;
bool any_available = false;
int rc;
+ unsigned int refind = 0;
/* Having a null inode here (because mapping->host was set to zero by
the VFS or MM) should not happen but we had reports of on oops (due to
@@ -996,40 +997,25 @@ struct cifsFileInfo *find_writable_file(
spin_lock(&cifs_file_list_lock);
refind_writable:
+ if (refind > MAX_REOPEN_ATT) {
+ spin_unlock(&cifs_file_list_lock);
+ return NULL;
+ }
list_for_each_entry(open_file, &cifs_inode->openFileList, flist) {
if (!any_available && open_file->pid != current->tgid)
continue;
if (fsuid_only && open_file->uid != current_fsuid())
continue;
if (OPEN_FMODE(open_file->f_flags) & FMODE_WRITE) {
- cifsFileInfo_get(open_file);
-
if (!open_file->invalidHandle) {
/* found a good writable file */
+ cifsFileInfo_get(open_file);
spin_unlock(&cifs_file_list_lock);
return open_file;
+ } else {
+ if (!inv_file)
+ inv_file = open_file;
}
-
- spin_unlock(&cifs_file_list_lock);
-
- /* Had to unlock since following call can block */
- rc = cifs_reopen_file(open_file, false);
- if (!rc)
- return open_file;
-
- /* if it fails, try another handle if possible */
- cFYI(1, "wp failed on reopen file");
- cifsFileInfo_put(open_file);
-
- spin_lock(&cifs_file_list_lock);
-
- /* else we simply continue to the next entry. Thus
- we do not loop on reopen errors. If we
- can not reopen the file, for example if we
- reconnected to a server with another client
- racing to delete or lock the file we would not
- make progress if we restarted before the beginning
- of the loop here. */
}
}
/* couldn't find useable FH with same pid, try any available */
@@ -1037,7 +1023,30 @@ refind_writable:
any_available = true;
goto refind_writable;
}
+
+ if (inv_file) {
+ any_available = false;
+ cifsFileInfo_get(inv_file);
+ }
+
spin_unlock(&cifs_file_list_lock);
+
+ if (inv_file) {
+ rc = cifs_reopen_file(inv_file, false);
+ if (!rc)
+ return inv_file;
+ else {
+ spin_lock(&cifs_file_list_lock);
+ list_move_tail(&inv_file->flist,
+ &cifs_inode->openFileList);
+ spin_unlock(&cifs_file_list_lock);
+ cifsFileInfo_put(inv_file);
+ spin_lock(&cifs_file_list_lock);
+ ++refind;
+ goto refind_writable;
+ }
+ }
+
return NULL;
}
next prev parent reply other threads:[~2012-06-07 4:14 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-07 4:15 [ 00/47] 3.0.34-stable review Greg KH
2012-06-07 4:13 ` [ 01/47] SCSI: fix scsi_wait_scan Greg KH
2012-06-07 4:14 ` [ 02/47] SCSI: Fix dm-multipath starvation when scsi host is busy Greg KH
2012-06-07 4:14 ` [ 03/47] mm: consider all swapped back pages in used-once logic Greg KH
2012-06-07 4:14 ` [ 04/47] mm: pmd_read_atomic: fix 32bit PAE pmd walk vs pmd_populate SMP race condition Greg KH
2012-06-07 4:14 ` [ 05/47] iwlwifi: update BT traffic load states correctly Greg KH
2012-06-07 4:14 ` Greg KH [this message]
2012-06-07 4:14 ` [ 07/47] PARISC: fix boot failure on 32-bit systems caused by branch stubs placed before .text Greg KH
2012-06-07 4:14 ` [ 08/47] PARISC: fix TLB fault path on PA2.0 narrow systems Greg KH
2012-06-07 4:14 ` [ 09/47] solos-pci: Fix DMA support Greg KH
2012-06-07 4:14 ` [ 10/47] mac80211: fix ADDBA declined after suspend with wowlan Greg KH
2012-06-07 4:14 ` [ 11/47] NFSv4: Map NFS4ERR_SHARE_DENIED into an EACCES error instead of EIO Greg KH
2012-06-07 4:14 ` [ 12/47] drm/radeon: fix XFX quirk Greg KH
2012-06-07 4:14 ` [ 13/47] drm/i915: properly handle interlaced bit for sdvo dtd conversion Greg KH
2012-06-07 4:14 ` [ 14/47] drm/i915: wait for a vblank to pass after tv detect Greg KH
2012-06-07 4:14 ` [ 15/47] Bluetooth: Add support for Broadcom BCM20702A0 Greg KH
2012-06-07 4:14 ` [ 16/47] Bluetooth: Add support for BCM20702A0 [0a5c:21e3] Greg KH
2012-06-07 4:14 ` [ 17/47] Bluetooth: btusb: Add vendor specific ID (0a5c 21f3) for BCM20702A0 Greg KH
2012-06-07 4:14 ` [ 18/47] Bluetooth: btusb: add support for BCM20702A0 [0a5c:21e6] Greg KH
2012-06-07 4:14 ` [ 19/47] Bluetooth: btusb: Add USB device ID "0a5c 21e8" Greg KH
2012-06-07 4:14 ` [ 20/47] Bluetooth: btusb: Add vendor specific ID (0489 e042) for BCM20702A0 Greg KH
2012-06-07 4:14 ` [ 21/47] Bluetooth: btusb: typo in Broadcom SoftSailing id Greg KH
2012-06-07 4:14 ` [ 22/47] Add Foxconn / Hon Hai IDs for btusb module Greg KH
2012-06-07 4:14 ` [ 23/47] Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C Greg KH
2012-06-07 4:14 ` [ 24/47] ALSA: usb-audio: fix rate_list memory leak Greg KH
2012-06-07 4:14 ` [ 25/47] vfs: umount_tree() might be called on subtree that had never made it Greg KH
2012-06-07 4:14 ` [ 26/47] mtd: nand: fix scan_read_raw_oob Greg KH
2012-06-07 4:14 ` [ 27/47] drm/radeon: properly program gart on rv740, juniper, cypress, barts, hemlock Greg KH
2012-06-07 4:14 ` [ 28/47] drm/radeon: fix HD6790, HD6570 backend programming Greg KH
2012-06-07 4:14 ` [ 29/47] drm/ttm: Fix spinlock imbalance Greg KH
2012-06-07 4:14 ` [ 30/47] ipv4: Do not use dead fib_info entries Greg KH
2012-06-07 4:14 ` [ 31/47] ipv4: fix the rcu race between free_fib_info and ip_route_output_slow Greg KH
2012-06-07 4:14 ` [ 32/47] ipv6: fix incorrect ipsec fragment Greg KH
2012-06-07 4:14 ` [ 33/47] l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case Greg KH
2012-06-07 4:14 ` [ 34/47] pktgen: fix crash at module unload Greg KH
2012-06-07 4:14 ` [ 35/47] pktgen: fix module unload for good Greg KH
2012-06-07 4:14 ` [ 36/47] Revert "net: maintain namespace isolation between vlan and real device" Greg KH
2012-06-07 4:14 ` [ 37/47] sctp: check cached dst before using it Greg KH
2012-06-07 4:14 ` [ 38/47] skb: avoid unnecessary reallocations in __skb_cow Greg KH
2012-06-07 4:14 ` [ 39/47] xfrm: take net hdr len into account for esp payload size calculation Greg KH
2012-06-07 4:14 ` [ 40/47] ext4: force ro mount if ext4_setup_super() fails Greg KH
2012-06-07 4:14 ` [ 41/47] ext4: add missing save_error_info() to ext4_error() Greg KH
2012-06-07 4:14 ` [ 42/47] ext4: dont trash state flags in EXT4_IOC_SETFLAGS Greg KH
2012-06-07 4:14 ` [ 43/47] ext4: add ext4_mb_unload_buddy in the error path Greg KH
2012-06-07 4:14 ` [ 44/47] ext4: remove mb_groups before tearing down the buddy_cache Greg KH
2012-06-07 4:14 ` [ 45/47] drm/radeon/kms: add new BTC PCI ids Greg KH
2012-06-07 4:14 ` [ 46/47] ACPI battery: only refresh the sysfs files when pertinent information changes Greg KH
2012-06-07 4:14 ` [ 47/47] wl1251: fix oops on early interrupt Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120607041359.080948991@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jlayton@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sfrench@us.ibm.com \
--cc=shirishpargaonkar@gmail.com \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).