stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org,
	alan@lxorguk.ukuu.org.uk, Andiry Xu <andiry.xu@gmail.com>,
	Sarah Sharp <sarah.a.sharp@linux.intel.com>,
	Ming Lei <ming.lei@canonical.com>
Subject: [ 31/61] xHCI: Increase the timeout for controller save/restore state operation
Date: Wed, 20 Jun 2012 10:30:51 -0700	[thread overview]
Message-ID: <20120620173023.590222681@linuxfoundation.org> (raw)
In-Reply-To: <20120620173033.GA5634@kroah.com>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andiry Xu <andiry.xu@gmail.com>

commit 622eb783fe6ff4c1baa47db16c3a5db97f9e6e50 upstream.

When system software decides to power down the xHC with the intent of
resuming operation at a later time, it will ask xHC to save the internal
state and restore it when resume to correctly recover from a power event.
Two bits are used to enable this operation: Save State and Restore State.

xHCI spec 4.23.2 says software should "Set the Controller Save/Restore
State flag in the USBCMD register and wait for the Save/Restore State
Status flag in the USBSTS register to transition to '0'". However, it does
not define how long software should wait for the SSS/RSS bit to transition
to 0.

Currently the timeout is set to 1ms. There is bug report
(https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1002697)
indicates that the timeout is too short for ASMedia ASM1042 host controller
to save/restore the state successfully. Increase the timeout to 10ms helps to
resolve the issue.

This patch should be backported to stable kernels as old as 2.6.37, that
contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI:
PCI power management implementation"

Signed-off-by: Andiry Xu <andiry.xu@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -795,8 +795,8 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_CSS;
 	xhci_writel(xhci, command, &xhci->op_regs->command);
-	if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) {
-		xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n");
+	if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) {
+		xhci_warn(xhci, "WARN: xHC save state timeout\n");
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
 	}
@@ -848,8 +848,8 @@ int xhci_resume(struct xhci_hcd *xhci, b
 		command |= CMD_CRS;
 		xhci_writel(xhci, command, &xhci->op_regs->command);
 		if (handshake(xhci, &xhci->op_regs->status,
-			      STS_RESTORE, 0, 10*100)) {
-			xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n");
+			      STS_RESTORE, 0, 10 * 1000)) {
+			xhci_warn(xhci, "WARN: xHC restore state timeout\n");
 			spin_unlock_irq(&xhci->lock);
 			return -ETIMEDOUT;
 		}



  parent reply	other threads:[~2012-06-20 17:30 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-20 17:30 [ 00/61] 3.4.4-stable review Greg KH
2012-06-20 17:30 ` [ 01/61] ARM i.MX53: Fix PLL4 base address Greg KH
2012-06-20 17:30 ` [ 02/61] ARM: imx6: exit coherency when shutting down a cpu Greg KH
2012-06-20 17:30 ` [ 03/61] ARM i.MX imx21ads: Fix overlapping static i/o mappings Greg KH
2012-06-20 17:30 ` [ 04/61] Revert "drm/i915/dp: Use auxch precharge value of 5 everywhere" Greg KH
2012-06-20 18:51   ` Adam Jackson
2012-06-20 19:01     ` Greg KH
2012-06-21 11:48       ` Wouter M. Koolen
2012-06-20 17:30 ` [ 05/61] drm/radeon: add some additional 6xx/7xx/EG register init Greg KH
2012-06-20 17:30 ` [ 06/61] drm via: initialize object_idr Greg KH
2012-06-20 17:30 ` [ 07/61] drm/udl: only bind to the video devices on the hub Greg KH
2012-06-20 17:30 ` [ 08/61] drm sis: initialize object_idr Greg KH
2012-06-20 17:30 ` [ 09/61] xen/hvc: Collapse error logic Greg KH
2012-06-20 17:30 ` [ 10/61] xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN Greg KH
2012-06-20 17:30 ` [ 11/61] xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness Greg KH
2012-06-20 17:30 ` [ 12/61] xen/setup: filter APERFMPERF cpuid feature out Greg KH
2012-06-20 17:30 ` [ 13/61] NFSv4.1: Fix a request leak on the back channel Greg KH
2012-06-20 17:30 ` [ 14/61] NFSv4: Fix unnecessary delegation returns in nfs4_do_open Greg KH
2012-06-20 17:30 ` [ 15/61] nfsd4: BUG_ON(!is_spin_locked()) no good on UP kernels Greg KH
2012-06-20 17:30 ` [ 16/61] tracing: Have tracing_off() actually turn tracing off Greg KH
2012-06-20 17:30 ` [ 17/61] rpc_pipefs: allow rpc_purge_list to take a NULL waitq pointer Greg KH
2012-06-20 17:30 ` [ 18/61] SCSI: mpt2sas: Fix unsafe using smp_processor_id() in preemptible Greg KH
2012-06-20 17:30 ` [ 19/61] swap: fix shmem swapping when more than 8 areas Greg KH
2012-06-20 17:30 ` [ 20/61] USB: option: Add Vodafone/Huawei K5005 support Greg KH
2012-06-20 17:30 ` [ 21/61] USB: option: Updated Huawei K4605 has better id Greg KH
2012-06-20 17:30 ` [ 22/61] USB: option: add more YUGA device ids Greg KH
2012-06-20 17:30 ` [ 23/61] USB: option: fix memory leak Greg KH
2012-06-20 17:30 ` [ 24/61] USB: option: fix port-data abuse Greg KH
2012-06-20 17:30 ` [ 25/61] kdump: Execute kmsg_dump(KMSG_DUMP_PANIC) after smp_send_stop() Greg KH
2012-06-20 17:30 ` [ 26/61] hfsplus: fix overflow in sector calculations in hfsplus_submit_bio Greg KH
2012-06-20 17:30 ` [ 27/61] hfsplus: fix bless ioctl when used with hardlinks Greg KH
2012-06-20 17:30 ` [ 28/61] Make hard_irq_disable() actually hard-disable interrupts Greg KH
2012-06-20 17:30 ` [ 29/61] xhci: Fix invalid loop check in xhci_free_tt_info() Greg KH
2012-06-20 17:30 ` [ 30/61] xhci: Dont free endpoints in xhci_mem_cleanup() Greg KH
2012-06-20 17:30 ` Greg KH [this message]
2012-06-20 17:30 ` [ 32/61] usb-storage: Add 090c:1000 to unusal-devs Greg KH
2012-06-20 17:30 ` [ 33/61] USB: mos7840: Fix compilation of usb serial driver Greg KH
2012-06-20 17:30 ` [ 34/61] USB: qcserial: Add Sierra Wireless device IDs Greg KH
2012-06-20 17:30 ` [ 35/61] USB: mct_u232: Fix incorrect TIOCMSET return Greg KH
2012-06-20 17:30 ` [ 36/61] usb: musb: davinci: Fix build breakage Greg KH
2012-06-20 17:30 ` [ 37/61] usb: musb_gadget: fix crash caused by dangling pointer Greg KH
2012-06-20 17:30 ` [ 38/61] USB: fix PS3 EHCI systems Greg KH
2012-06-20 17:30 ` [ 39/61] USB: serial: cp210x: add Optris MS Pro usb id Greg KH
2012-06-20 17:31 ` [ 40/61] USB: ftdi-sio: Add support for RT Systems USB-RTS01 serial adapter Greg KH
2012-06-20 17:31 ` [ 41/61] USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2 Greg KH
2012-06-20 17:31 ` [ 42/61] USB: cdc-wdm: Add Vodafone/Huawei K5005 support Greg KH
2012-06-20 17:31 ` [ 43/61] usb: cdc-acm: fix devices not unthrottled on open Greg KH
2012-06-20 17:31 ` [ 44/61] USB: serial: sierra: Add support for Sierra Wireless AirCard 320U modem Greg KH
2012-06-20 17:31 ` [ 45/61] USB: serial: Enforce USB driver and USB serial driver match Greg KH
2012-06-20 17:31 ` [ 46/61] USB: fix gathering of interface associations Greg KH
2012-06-20 17:31 ` [ 47/61] ASoC: wm8904: Fix GPIO and MICBIAS initialisation for regmap conversion Greg KH
2012-06-20 17:31 ` [ 48/61] hwrng: atmel-rng - fix data valid check Greg KH
2012-06-20 17:31 ` [ 49/61] edac: avoid mce decoding crash after edac driver unloaded Greg KH
2012-06-20 17:31 ` [ 50/61] edac: fix the error about memory type detection on SandyBridge Greg KH
2012-06-20 17:31 ` [ 51/61] 9p: BUG before corrupting memory Greg KH
2012-06-20 17:31 ` [ 52/61] remoteproc/omap: fix dev_err typo Greg KH
2012-06-20 17:31 ` [ 53/61] remoteproc: fix print format warnings Greg KH
2012-06-20 17:31 ` [ 54/61] remoteproc: fix missing fault indication in error-path Greg KH
2012-06-20 17:31 ` [ 55/61] e1000e: Disable ASPM L1 on 82574 Greg KH
2012-06-20 17:31 ` [ 56/61] e1000e: Remove special case for 82573/82574 ASPM L1 disablement Greg KH
2012-06-20 17:31 ` [ 57/61] ntp: Correct TAI offset during leap second Greg KH
2012-06-20 17:31 ` [ 58/61] iwlwifi: fix the Transmit Frame Descriptor rings Greg KH
2012-06-20 17:31 ` [ 59/61] iwlwifi: use correct supported firmware for 6035 and 6000g2 Greg KH
2012-06-20 17:31 ` [ 60/61] iwlwifi: fix TX power antenna access Greg KH
2012-06-20 17:31 ` [ 61/61] target: Return error to initiator if SET TARGET PORT GROUPS emulation fails Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120620173023.590222681@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=andiry.xu@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ming.lei@canonical.com \
    --cc=sarah.a.sharp@linux.intel.com \
    --cc=stable@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).