From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
alan@lxorguk.ukuu.org.uk, Jesse Barnes <jbarnes@virtuousgeek.org>,
Keith Packard <keithp@keithp.com>,
Timo Aaltonen <timo.aaltonen@canonical.com>
Subject: [ 18/31] drm/i915: apply timing generator bug workaround on CPT and PPT
Date: Thu, 25 Oct 2012 17:04:25 -0700 [thread overview]
Message-ID: <20121026000216.803084512@linuxfoundation.org> (raw)
In-Reply-To: <20121026000214.941721299@linuxfoundation.org>
3.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jesse Barnes <jbarnes@virtuousgeek.org>
commit 3bcf603f6d5d18bd9d076dc280de71f48add4101 upstream.
On CougarPoint and PantherPoint PCH chips, the timing generator may fail
to start after DP training completes. This is due to a bug in the
FDI autotraining detect logic (which will stall the timing generator and
re-enable it once training completes), so disable it to avoid silent DP
mode setting failures.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Timo Aaltonen <timo.aaltonen@canonical.com>
---
drivers/gpu/drm/i915/i915_reg.h | 5 +++++
drivers/gpu/drm/i915/intel_display.c | 4 ++++
2 files changed, 9 insertions(+)
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3113,6 +3113,11 @@
#define TRANS_6BPC (2<<5)
#define TRANS_12BPC (3<<5)
+#define _TRANSA_CHICKEN2 0xf0064
+#define _TRANSB_CHICKEN2 0xf1064
+#define TRANS_CHICKEN2(pipe) _PIPE(pipe, _TRANSA_CHICKEN2, _TRANSB_CHICKEN2)
+#define TRANS_AUTOTRAIN_GEN_STALL_DIS (1<<31)
+
#define SOUTH_CHICKEN2 0xc2004
#define DPLS_EDP_PPS_FIX_DIS (1<<0)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7584,6 +7584,7 @@ static void ibx_init_clock_gating(struct
static void cpt_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe;
/*
* On Ibex Peak and Cougar Point, we need to disable clock
@@ -7593,6 +7594,9 @@ static void cpt_init_clock_gating(struct
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
DPLS_EDP_PPS_FIX_DIS);
+ /* Without this, mode sets may fail silently on FDI */
+ for_each_pipe(pipe)
+ I915_WRITE(TRANS_CHICKEN2(pipe), TRANS_AUTOTRAIN_GEN_STALL_DIS);
}
static void ironlake_teardown_rc6(struct drm_device *dev)
next prev parent reply other threads:[~2012-10-26 0:04 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-26 0:04 [ 00/31] 3.0.49-stable review Greg Kroah-Hartman
2012-10-26 0:04 ` [ 01/31] arch/tile: avoid generating .eh_frame information in modules Greg Kroah-Hartman
2012-10-26 0:04 ` [ 02/31] NLM: nlm_lookup_file() may return NLMv4-specific error codes Greg Kroah-Hartman
2012-10-26 0:04 ` [ 03/31] oprofile, x86: Fix wrapping bug in op_x86_get_ctrl() Greg Kroah-Hartman
2012-10-26 0:04 ` [ 04/31] SUNRPC: Prevent kernel stack corruption on long values of flush Greg Kroah-Hartman
2012-10-26 0:04 ` [ 05/31] Revert: lockd: use rpc clients cl_nodename for id encoding Greg Kroah-Hartman
2012-10-26 0:04 ` [ 06/31] pcmcia: sharpsl: dont discard sharpsl_pcmcia_ops Greg Kroah-Hartman
2012-10-26 0:04 ` [ 07/31] kernel/sys.c: fix stack memory content leak via UNAME26 Greg Kroah-Hartman
2012-10-26 0:04 ` [ 09/31] x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping Greg Kroah-Hartman
2012-10-26 0:04 ` [ 10/31] xen/x86: dont corrupt %eip when returning from a signal handler Greg Kroah-Hartman
2012-10-26 0:04 ` [ 11/31] USB: cdc-acm: fix pipe type of write endpoint Greg Kroah-Hartman
2012-10-26 0:04 ` [ 12/31] usb: acm: fix the computation of the number of data bits Greg Kroah-Hartman
2012-10-26 0:04 ` [ 13/31] USB: option: blacklist net interface on ZTE devices Greg Kroah-Hartman
2012-10-26 0:04 ` [ 14/31] USB: option: add more " Greg Kroah-Hartman
2012-10-26 0:04 ` [ 15/31] cgroup: notify_on_release may not be triggered in some cases Greg Kroah-Hartman
2012-10-26 0:04 ` [ 16/31] amd64_edac:__amd64_set_scrub_rate(): avoid overindexing scrubrates[] Greg Kroah-Hartman
2012-10-26 0:04 ` [ 17/31] media: au0828: fix case where STREAMOFF being called on stopped stream causes BUG() Greg Kroah-Hartman
2012-10-26 0:04 ` Greg Kroah-Hartman [this message]
2012-10-26 0:04 ` [ 19/31] net: Fix skb_under_panic oops in neigh_resolve_output Greg Kroah-Hartman
2012-10-26 0:04 ` [ 20/31] skge: Add DMA mask quirk for Marvell 88E8001 on ASUS P5NSLI motherboard Greg Kroah-Hartman
2012-10-26 0:04 ` [ 21/31] RDS: fix rds-ping spinlock recursion Greg Kroah-Hartman
2012-10-26 0:04 ` [ 22/31] tcp: resets are misrouted Greg Kroah-Hartman
2012-10-26 0:04 ` [ 23/31] sparc64: fix ptrace interaction with force_successful_syscall_return() Greg Kroah-Hartman
2012-10-26 0:04 ` [ 24/31] sparc64: Like x86 we should check current->mm during perf backtrace generation Greg Kroah-Hartman
2012-10-26 0:04 ` [ 25/31] sparc64: Fix bit twiddling in sparc_pmu_enable_event() Greg Kroah-Hartman
2012-10-26 0:04 ` [ 26/31] sparc64: do not clobber personality flags in sys_sparc64_personality() Greg Kroah-Hartman
2012-10-26 0:04 ` [ 27/31] sparc64: Be less verbose during vmemmap population Greg Kroah-Hartman
2012-10-26 0:04 ` [ 28/31] xHCI: add cmd_ring_state Greg Kroah-Hartman
2012-10-26 0:04 ` [ 29/31] xHCI: add aborting command ring function Greg Kroah-Hartman
2012-10-26 0:04 ` [ 30/31] xHCI: cancel command after command timeout Greg Kroah-Hartman
2012-10-26 0:04 ` [ 31/31] xHCI: handle command after aborting the command ring Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121026000216.803084512@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jbarnes@virtuousgeek.org \
--cc=keithp@keithp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=timo.aaltonen@canonical.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).