From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
alan@lxorguk.ukuu.org.uk, Takashi Iwai <tiwai@suse.de>
Subject: [ 36/57] ALSA: Avoid endless sleep after disconnect
Date: Wed, 14 Nov 2012 20:11:44 -0800 [thread overview]
Message-ID: <20121115040935.445896659@linuxfoundation.org> (raw)
In-Reply-To: <20121115040933.223998671@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <tiwai@suse.de>
commit 0914f7961babbf28aaa2f19b453951fb4841c03f upstream.
When disconnect callback is called, each component should wake up
sleepers and check card->shutdown flag for avoiding the endless sleep
blocking the proper resource release.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/core/control.c | 2 ++
sound/core/hwdep.c | 7 +++++++
sound/core/oss/pcm_oss.c | 4 ++++
sound/core/pcm.c | 6 +++++-
sound/core/pcm_native.c | 8 ++++++++
sound/core/rawmidi.c | 20 ++++++++++++++++++++
6 files changed, 46 insertions(+), 1 deletion(-)
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -1436,6 +1436,8 @@ static ssize_t snd_ctl_read(struct file
spin_unlock_irq(&ctl->read_lock);
schedule();
remove_wait_queue(&ctl->change_sleep, &wait);
+ if (ctl->card->shutdown)
+ return -ENODEV;
if (signal_pending(current))
return -ERESTARTSYS;
spin_lock_irq(&ctl->read_lock);
--- a/sound/core/hwdep.c
+++ b/sound/core/hwdep.c
@@ -131,6 +131,10 @@ static int snd_hwdep_open(struct inode *
mutex_unlock(&hw->open_mutex);
schedule();
mutex_lock(&hw->open_mutex);
+ if (hw->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
@@ -462,12 +466,15 @@ static int snd_hwdep_dev_disconnect(stru
mutex_unlock(®ister_mutex);
return -EINVAL;
}
+ mutex_lock(&hwdep->open_mutex);
+ wake_up(&hwdep->open_wait);
#ifdef CONFIG_SND_OSSEMUL
if (hwdep->ossreg)
snd_unregister_oss_device(hwdep->oss_type, hwdep->card, hwdep->device);
#endif
snd_unregister_device(SNDRV_DEVICE_TYPE_HWDEP, hwdep->card, hwdep->device);
list_del_init(&hwdep->list);
+ mutex_unlock(&hwdep->open_mutex);
mutex_unlock(®ister_mutex);
return 0;
}
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -2441,6 +2441,10 @@ static int snd_pcm_oss_open(struct inode
mutex_unlock(&pcm->open_mutex);
schedule();
mutex_lock(&pcm->open_mutex);
+ if (pcm->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -1087,12 +1087,16 @@ static int snd_pcm_dev_disconnect(struct
goto unlock;
mutex_lock(&pcm->open_mutex);
+ wake_up(&pcm->open_wait);
list_del_init(&pcm->list);
for (cidx = 0; cidx < 2; cidx++)
for (substream = pcm->streams[cidx].substream; substream; substream = substream->next) {
snd_pcm_stream_lock_irq(substream);
- if (substream->runtime)
+ if (substream->runtime) {
substream->runtime->status->state = SNDRV_PCM_STATE_DISCONNECTED;
+ wake_up(&substream->runtime->sleep);
+ wake_up(&substream->runtime->tsleep);
+ }
snd_pcm_stream_unlock_irq(substream);
}
list_for_each_entry(notify, &snd_pcm_notify_list, list) {
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1508,6 +1508,10 @@ static int snd_pcm_drain(struct snd_pcm_
down_read(&snd_pcm_link_rwsem);
snd_pcm_stream_lock_irq(substream);
remove_wait_queue(&to_check->sleep, &wait);
+ if (card->shutdown) {
+ result = -ENODEV;
+ break;
+ }
if (tout == 0) {
if (substream->runtime->status->state == SNDRV_PCM_STATE_SUSPENDED)
result = -ESTRPIPE;
@@ -2158,6 +2162,10 @@ static int snd_pcm_open(struct file *fil
mutex_unlock(&pcm->open_mutex);
schedule();
mutex_lock(&pcm->open_mutex);
+ if (pcm->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
--- a/sound/core/rawmidi.c
+++ b/sound/core/rawmidi.c
@@ -424,6 +424,10 @@ static int snd_rawmidi_open(struct inode
mutex_unlock(&rmidi->open_mutex);
schedule();
mutex_lock(&rmidi->open_mutex);
+ if (rmidi->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
@@ -995,6 +999,8 @@ static ssize_t snd_rawmidi_read(struct f
spin_unlock_irq(&runtime->lock);
schedule();
remove_wait_queue(&runtime->sleep, &wait);
+ if (rfile->rmidi->card->shutdown)
+ return -ENODEV;
if (signal_pending(current))
return result > 0 ? result : -ERESTARTSYS;
if (!runtime->avail)
@@ -1238,6 +1244,8 @@ static ssize_t snd_rawmidi_write(struct
spin_unlock_irq(&runtime->lock);
timeout = schedule_timeout(30 * HZ);
remove_wait_queue(&runtime->sleep, &wait);
+ if (rfile->rmidi->card->shutdown)
+ return -ENODEV;
if (signal_pending(current))
return result > 0 ? result : -ERESTARTSYS;
if (!runtime->avail && !timeout)
@@ -1613,9 +1621,20 @@ static int snd_rawmidi_dev_register(stru
static int snd_rawmidi_dev_disconnect(struct snd_device *device)
{
struct snd_rawmidi *rmidi = device->device_data;
+ int dir;
mutex_lock(®ister_mutex);
+ mutex_lock(&rmidi->open_mutex);
+ wake_up(&rmidi->open_wait);
list_del_init(&rmidi->list);
+ for (dir = 0; dir < 2; dir++) {
+ struct snd_rawmidi_substream *s;
+ list_for_each_entry(s, &rmidi->streams[dir].substreams, list) {
+ if (s->runtime)
+ wake_up(&s->runtime->sleep);
+ }
+ }
+
#ifdef CONFIG_SND_OSSEMUL
if (rmidi->ossreg) {
if ((int)rmidi->device == midi_map[rmidi->card->number]) {
@@ -1630,6 +1649,7 @@ static int snd_rawmidi_dev_disconnect(st
}
#endif /* CONFIG_SND_OSSEMUL */
snd_unregister_device(SNDRV_DEVICE_TYPE_RAWMIDI, rmidi->card, rmidi->device);
+ mutex_unlock(&rmidi->open_mutex);
mutex_unlock(®ister_mutex);
return 0;
}
next prev parent reply other threads:[~2012-11-15 4:11 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-15 4:11 [ 00/57] 3.4.19-stable review Greg Kroah-Hartman
2012-11-15 4:11 ` [ 01/57] xen/gntdev: dont leak memory from IOCTL_GNTDEV_MAP_GRANT_REF Greg Kroah-Hartman
2012-11-15 4:11 ` [ 02/57] xen/mmu: Use Xen specific TLB flush instead of the generic one Greg Kroah-Hartman
2012-11-15 4:11 ` [ 03/57] Input: tsc40 - remove wrong announcement of pressure support Greg Kroah-Hartman
2012-11-15 4:11 ` [ 04/57] ath9k: fix stale pointers potentially causing access to freed skbs Greg Kroah-Hartman
2012-11-15 4:11 ` [ 05/57] ath9k: Test for TID only in BlockAcks while checking tx status Greg Kroah-Hartman
2012-11-15 4:11 ` [ 06/57] rt2800: validate step value for temperature compensation Greg Kroah-Hartman
2012-11-15 4:11 ` [ 07/57] target: Dont return success from module_init() if setup fails Greg Kroah-Hartman
2012-11-15 4:11 ` [ 08/57] target: Avoid integer overflow in se_dev_align_max_sectors() Greg Kroah-Hartman
2012-11-15 4:11 ` [ 09/57] iscsi-target: Fix missed wakeup race in TX thread Greg Kroah-Hartman
2012-11-15 4:11 ` [ 10/57] target: Fix incorrect usage of nested IRQ spinlocks in ABORT_TASK path Greg Kroah-Hartman
2012-11-15 4:11 ` [ 11/57] cfg80211: fix antenna gain handling Greg Kroah-Hartman
2012-11-15 4:11 ` [ 12/57] wireless: drop invalid mesh address extension frames Greg Kroah-Hartman
2012-11-15 4:11 ` [ 13/57] mac80211: use blacklist for duplicate IE check Greg Kroah-Hartman
2012-11-15 4:11 ` [ 14/57] mac80211: Only process mesh config header on frames that RA_MATCH Greg Kroah-Hartman
2012-11-15 4:11 ` [ 15/57] mac80211: dont inspect Sequence Control field on control frames Greg Kroah-Hartman
2012-11-15 4:11 ` [ 16/57] DRM/Radeon: Fix Load Detection on legacy primary DAC Greg Kroah-Hartman
2012-11-15 4:11 ` [ 17/57] drm/udl: fix stride issues scanning out stride != width*bpp Greg Kroah-Hartman
2012-11-15 4:11 ` [ 18/57] mac80211: check management frame header length Greg Kroah-Hartman
2012-11-15 4:11 ` [ 19/57] mac80211: verify that skb data is present Greg Kroah-Hartman
2012-11-15 4:11 ` [ 20/57] mac80211: make sure data is accessible in EAPOL check Greg Kroah-Hartman
2012-11-15 4:11 ` [ 21/57] mac80211: fix SSID copy on IBSS JOIN Greg Kroah-Hartman
2012-11-15 4:11 ` [ 22/57] nfsv3: Make v3 mounts fail with ETIMEDOUTs instead EIO on mountd timeouts Greg Kroah-Hartman
2012-11-15 4:11 ` [ 23/57] nfs: Show original device name verbatim in /proc/*/mount{s,info} Greg Kroah-Hartman
2012-11-15 4:11 ` [ 24/57] NFSv4: nfs4_locku_done must release the sequence id Greg Kroah-Hartman
2012-11-15 4:11 ` [ 25/57] NFSv4.1: We must release the sequence id when we fail to get a session slot Greg Kroah-Hartman
2012-11-15 4:11 ` [ 26/57] nfsd: add get_uint for u32s Greg Kroah-Hartman
2012-11-15 4:11 ` [ 27/57] NFS: fix bug in legacy DNS resolver Greg Kroah-Hartman
2012-11-15 4:11 ` [ 28/57] NFS: Fix Oopses in nfs_lookup_revalidate and nfs4_lookup_revalidate Greg Kroah-Hartman
2012-11-15 4:11 ` [ 29/57] drm: restore open_count if drm_setup fails Greg Kroah-Hartman
2012-11-15 4:11 ` [ 30/57] hwmon: (w83627ehf) Force initial bank selection Greg Kroah-Hartman
2012-11-15 4:11 ` [ 31/57] ALSA: PCM: Fix some races at disconnection Greg Kroah-Hartman
2012-11-15 4:11 ` [ 32/57] ALSA: usb-audio: Fix " Greg Kroah-Hartman
2012-11-15 4:11 ` [ 33/57] ALSA: usb-audio: Use rwsem for disconnect protection Greg Kroah-Hartman
2012-11-15 4:11 ` [ 34/57] ALSA: usb-audio: Fix races at disconnection in mixer_quirks.c Greg Kroah-Hartman
2012-11-15 4:11 ` [ 35/57] ALSA: Add a reference counter to card instance Greg Kroah-Hartman
2012-11-15 4:11 ` Greg Kroah-Hartman [this message]
2012-11-15 4:11 ` [ 37/57] sctp: fix call to SCTP_CMD_PROCESS_SACK in sctp_cmd_interpreter() Greg Kroah-Hartman
2012-11-15 4:11 ` [ 38/57] netlink: use kfree_rcu() in netlink_release() Greg Kroah-Hartman
2012-11-15 4:11 ` [ 39/57] tcp: fix FIONREAD/SIOCINQ Greg Kroah-Hartman
2012-11-15 4:11 ` [ 40/57] ipv6: Set default hoplimit as zero Greg Kroah-Hartman
2012-11-15 4:11 ` [ 41/57] net: usb: Fix memory leak on Tx data path Greg Kroah-Hartman
2012-11-15 4:11 ` [ 42/57] net: fix divide by zero in tcp algorithm illinois Greg Kroah-Hartman
2012-11-15 4:11 ` [ 43/57] drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_free Greg Kroah-Hartman
2012-11-15 4:11 ` [ 44/57] l2tp: fix oops in l2tp_eth_create() error path Greg Kroah-Hartman
2012-11-15 4:11 ` [ 45/57] net: inet_diag -- Return error code if protocol handler is missed Greg Kroah-Hartman
2012-11-15 4:11 ` [ 46/57] af-packet: fix oops when socket is not present Greg Kroah-Hartman
2012-11-15 4:11 ` [ 47/57] ipv6: send unsolicited neighbour advertisements to all-nodes Greg Kroah-Hartman
2012-11-15 4:11 ` [ 48/57] futex: Handle futex_pi OWNER_DIED take over correctly Greg Kroah-Hartman
2012-11-15 4:11 ` [ 49/57] mmc: sdhci: fix NULL dereference in sdhci_request() tuning Greg Kroah-Hartman
2012-11-15 4:11 ` [ 50/57] drm/vmwgfx: Fix hibernation device reset Greg Kroah-Hartman
2012-11-15 4:11 ` [ 51/57] drm/vmwgfx: Fix a case where the code would BUG when trying to pin GMR memory Greg Kroah-Hartman
2012-11-15 4:12 ` [ 52/57] drm/radeon/cayman: add some missing regs to the VM reg checker Greg Kroah-Hartman
2012-11-15 4:12 ` [ 53/57] drm/radeon/si: " Greg Kroah-Hartman
2012-11-15 4:12 ` [ 54/57] drm/i915: fixup infoframe support for sdvo Greg Kroah-Hartman
2012-11-15 4:12 ` [ 55/57] drm/i915: clear the entire sdvo infoframe buffer Greg Kroah-Hartman
2012-11-15 4:12 ` [ 56/57] USB: mos7840: remove unused variable Greg Kroah-Hartman
2012-11-15 4:12 ` [ 57/57] xfs: fix reading of wrapped log data Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121115040935.445896659@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).