[ 000/221] 3.7.3-stable review

[ 000/221] 3.7.3-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.7.3 release.
There are 221 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Jan 17 18:49:23 UTC 2013.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.7.3-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.7.3-rc1

Chris Wilson <chris@chris-wilson.co.uk>
    drm/i915: Treat crtc->mode.clock == 0 as disabled

Krzysztof Mazur <krzysiek@podlesie.net>
    i915: ensure that VGA plane is disabled

Daniel Vetter <daniel.vetter@ffwll.ch>
    drm/i915: force restore on lid open

David Zafman <david.zafman@inktank.com>
    libceph: Unlock unprocessed pages in start_read() error path

Yan, Zheng <zheng.z.yan@intel.com>
    ceph: call handle_cap_grant() for cap import message

Yan, Zheng <zheng.z.yan@intel.com>
    ceph: Fix __ceph_do_pending_vmtruncate

Yan, Zheng <zheng.z.yan@intel.com>
    ceph: Don't add dirty inode to dirty list if caps is in migration

Yan, Zheng <zheng.z.yan@intel.com>
    ceph: Fix infinite loop in __wake_requests

Yan, Zheng <zheng.z.yan@intel.com>
    ceph: Don't update i_max_size when handling non-auth cap

Alex Elder <elder@inktank.com>
    rbd: remove linger unconditionally

Alex Elder <elder@inktank.com>
    rbd: get rid of RBD_MAX_SEG_NAME_LEN

Alex Elder <elder@inktank.com>
    rbd: do not allow remove of mounted-on image

Alex Elder <elder@inktank.com>
    rbd: remove snapshots on error in rbd_add()

Alex Elder <elder@inktank.com>
    rbd: increase maximum snapshot name length

Alex Elder <elder@inktank.com>
    rbd: fix read-only option name

Alex Elder <elder@inktank.com>
    rbd: zero return code in rbd_dev_image_id()

Alex Elder <elder@inktank.com>
    rbd: fix bug in rbd_dev_id_put()

Alex Elder <elder@inktank.com>
    ceph: don't reference req after put

Sage Weil <sage@inktank.com>
    libceph: remove 'osdtimeout' option

Alex Elder <elder@inktank.com>
    libceph: avoid using freed osd in __kick_osd_requests()

Sage Weil <sage@inktank.com>
    libceph: fix osdmap decode error paths

Sage Weil <sage@inktank.com>
    libceph: fix protocol feature mismatch failure path

Daniel Vetter <daniel.vetter@ffwll.ch>
    Revert "drm/i915: no lvds quirk for Zotac ZDBOX SD ID12/ID13"

Alex Elder <elder@inktank.com>
    libceph: WARN, don't BUG on unexpected connection states

Alex Elder <elder@inktank.com>
    libceph: always reset osds when kicking

Alex Elder <elder@inktank.com>
    libceph: move linger requests sooner in kick_requests()

Alex Elder <elder@inktank.com>
    libceph: register request before unregister linger

Alex Elder <elder@inktank.com>
    libceph: don't use rb_init_node() in ceph_osdc_alloc_request()

Alex Elder <elder@inktank.com>
    libceph: init event->node in ceph_osdc_create_event()

Alex Elder <elder@inktank.com>
    libceph: init osd->o_node in create_osd()

Alex Elder <elder@inktank.com>
    libceph: report connection fault with warning

Alex Elder <elder@inktank.com>
    libceph: socket can close in any connection state

Alexander Graf <agraf@suse.de>
    KVM: PPC: 44x: fix DCR read/write

Daniel Vetter <daniel.vetter@ffwll.ch>
    drm/i915: disable cpt phase pointer fdi rx workaround

Konstantin Khlebnikov <khlebnikov@openvz.org>
    EDAC: Fix kernel panic on module unloading

Stanislaw Gruszka <sgruszka@redhat.com>
    Revert: "rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails"

Joe Thornber <ejt@redhat.com>
    dm thin: fix race between simultaneous io and discards to same block

Ralf Baechle <ralf@linux-mips.org>
    Revert "MIPS: Optimise TLB handlers for MIPS32/64 R2 cores."

Axel Lin <axel.lin@ingics.com>
    regulator: max8998: Ensure enough delay time for max8998_set_voltage_buck_time_sel

Axel Lin <axel.lin@ingics.com>
    regulator: max8998: Use uV in voltage_map_desc

Axel Lin <axel.lin@ingics.com>
    regulator: max8997: Use uV in voltage_map_desc

Jan Beulich <JBeulich@suse.com>
    USB: ehci: make debug port in-use detection functional again

Sarah Sharp <sarah.a.sharp@linux.intel.com>
    xhci: Handle HS bulk/ctrl endpoints that don't NAK.

Oliver Neukum <oliver@neukum.org>
    USB: hub: handle claim of enabled remote wakeup after reset

Sarah Sharp <sarah.a.sharp@linux.intel.com>
    xhci: Avoid "dead ports", add roothub port polling.

Sarah Sharp <sarah.a.sharp@linux.intel.com>
    USB: Handle warm reset failure on empty port.

Sarah Sharp <sarah.a.sharp@linux.intel.com>
    USB: Ignore port state until reset completes.

Sarah Sharp <sarah.a.sharp@linux.intel.com>
    USB: Increase reset timeout.

Sarah Sharp <sarah.a.sharp@linux.intel.com>
    USB: Allow USB 3.0 ports to be disabled.

Sarah Sharp <sarah.a.sharp@linux.intel.com>
    USB: Ignore xHCI Reset Device status.

Andreas Fleig <andreasfleig@gmail.com>
    USB: Add device quirk for Microsoft VX700 webcam

Sarah Sharp <sarah.a.sharp@linux.intel.com>
    USB: Handle auto-transition from hot to warm reset.

Aleksi Torhamo <aleksi@torhamo.net>
    drm/nvc0/fb: fix crash when different mutex is used to protect same list

Aleksi Torhamo <aleksi@torhamo.net>
    drm/nouveau/clock: fix support for more than 2 monitors on nve0

Marcin Slusarz <marcin.slusarz@gmail.com>
    drm/nouveau: add locking around instobj list operations

Marcin Slusarz <marcin.slusarz@gmail.com>
    drm/nouveau: fix blank LVDS screen regression on pre-nv50 cards

Marcin Slusarz <marcin.slusarz@gmail.com>
    drm/nv17-50: restore fence buffer on resume

Sergei Shtylyov <sshtylyov@ru.mvista.com>
    usb: musb: core: print new line in the driver banner again

Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    usb: gadget: dummy: fix enumeration with g_multi

Denis N Ladin <denladin@gmail.com>
    USB: cdc-acm: Add support for "PSC Scanning, Magellan 800i"

Tomasz Mloduchowski <q@qdot.me>
    usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid added

Bjørn Mork <bjorn@mork.no>
    USB: option: add Telekom Speedstick LTE II

Quentin.Li <snowmanli88@163.com>
    USB: option: Add new MEDIATEK PID support

Bjørn Mork <bjorn@mork.no>
    USB: option: blacklist network interface on ZTE MF880

Dzianis Kahanovich <mahatma@bspu.unibel.by>
    USB: option: add Nexpring NP10T terminal id

Larry Finger <Larry.Finger@lwfinger.net>
    b43: Fix firmware loading when driver is built into the kernel

Bing Zhao <bzhao@marvell.com>
    mwifiex: check wait_event_interruptible return value

Johannes Berg <johannes.berg@intel.com>
    mac80211: use del_timer_sync for final sta cleanup timer deletion

Johannes Berg <johannes.berg@intel.com>
    mac80211: fix station destruction in AP/mesh modes

Stanislaw Gruszka <sgruszka@redhat.com>
    mac80211: fix ibss scanning

Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    iwlwifi: fix the reclaimed packet tracking upon flush queue

Johannes Berg <johannes.berg@intel.com>
    iwlwifi: fix PCIe interrupt handle return value

Jerome Glisse <jglisse@redhat.com>
    radeon/kms: force rn50 chip to always report connected on analog output

Nitin Gupta <ngupta@vflare.org>
    staging: zram: fix invalid memory references during disk write

Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
    staging: zram: factor-out zram_decompress_page() function

Samuel Thibault <samuel.thibault@ens-lyon.org>
    staging: speakup: avoid out-of-range access in synth_add()

Nickolai Zeldovich <nickolai@csail.mit.edu>
    staging: speakup: avoid out-of-range access in synth_init()

Larry Finger <Larry.Finger@lwfinger.net>
    staging: r8712u: Add new device ID

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: comedi_test: fix race when cancelling command

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: Kconfig: COMEDI_NI_AT_A2150 should select COMEDI_FC

Éric Piel <piel@delmic.com>
    staging: comedi: fix minimum AO period for NI 625x and NI 628x

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: prevent auto-unconfig of manually configured devices

Mike Dunn <mikedunn@newsguy.com>
    ALSA: pxa27x: fix ac97 warm reset

Mike Dunn <mikedunn@newsguy.com>
    ALSA: pxa27x: fix ac97 cold reset

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Disable runtime D3 for Intel CPT & co

David Henningsson <david.henningsson@canonical.com>
    Revert "ALSA: hda - Shut up pins at power-saving mode with Conexnat codecs"

Linus Torvalds <torvalds@linux-foundation.org>
    vfs: add missing virtual cache flush after editing partial pages

Hans de Goede <hdegoede@redhat.com>
    udldrmfb: udl_get_edid: drop unneeded i--

Hans de Goede <hdegoede@redhat.com>
    udldrmfb: udl_get_edid: usb_control_msg buffer must not be on the stack

Hans de Goede <hdegoede@redhat.com>
    udldrmfb: Fix EDID not working with monitors with EDID extension blocks

Mark Brown <broonie@opensource.wolfsonmicro.com>
    ASoC: wm5100: Remove DSP B and left justified formats

Patrick Lai <plai@codeaurora.org>
    ASoC: pcm: allow backend hardware to be freed in pause state

Axel Lin <axel.lin@ingics.com>
    ASoC: sta529: Fix update register bits in sta529_set_dai_fmt

Mark Brown <broonie@opensource.wolfsonmicro.com>
    ASoC: wm2200: Remove DSP B and left justified AIF modes

Axel Lin <axel.lin@ingics.com>
    ASoC: wm2200: Fix setting dai format in wm2200_set_fmt

Mark Brown <broonie@opensource.wolfsonmicro.com>
    ASoC: wm2000: Fix sense of speech clarity enable

Mark Brown <broonie@opensource.wolfsonmicro.com>
    ASoC: arizona: Remove DSP B and left justified AIF modes

Axel Lin <axel.lin@ingics.com>
    ASoC: arizona: Do proper shift for setting AIF rate

Mark Brown <broonie@opensource.wolfsonmicro.com>
    ASoC: arizona: Correct FLL source definitions

Marek Vasut <marex@denx.de>
    HID: add quirk for Freescale i.MX23 ROM recovery

Eric Wong <normalperson@yhbt.net>
    epoll: prevent missed events on EPOLL_CTL_MOD

Mark Brown <broonie@opensource.wolfsonmicro.com>
    regmap: debugfs: Avoid overflows for very small reads

Zhang Rui <rui.zhang@intel.com>
    ACPI : do not use Lid and Sleep button for S5 wakeup

Namjae Jeon <namjae.jeon@samsung.com>
    udf: don't increment lenExtents while writing to a hole

Namjae Jeon <namjae.jeon@samsung.com>
    udf: fix memory leak while allocating blocks during write

Ed L. Cashin <ecashin@coraid.com>
    aoe: remove vestigial request queue allocation

Guo Chao <yan@linux.vnet.ibm.com>
    ext4: release buffer in failed path in dx_probe()

Theodore Ts'o <tytso@mit.edu>
    ext4: avoid hang when mounting non-journal filesystems with orphan list

Theodore Ts'o <tytso@mit.edu>
    ext4: lock i_mutex when truncating orphan inodes

Michael Tokarev <mjt@tls.msk.ru>
    ext4: do not try to write superblock on ro remount w/o journal

Jan Kara <jack@suse.cz>
    jbd2: fix assertion failure in jbd2_journal_flush()

Jan Kara <jack@suse.cz>
    ext4: check dioread_nolock on remount

Forrest Liu <forrestl@synology.com>
    ext4: fix extent tree corruption caused by hole punch

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    PM: Move disabling/enabling runtime PM to late suspend/early resume

Seth Forshee <seth.forshee@canonical.com>
    samsung-laptop: Add quirk for broken acpi_video backlight on N250P

Lothar Waßmann <LW@KARO-electronics.de>
    video: mxsfb: fix crash when unblanking the display

Hante Meuleman <meuleman@broadcom.com>
    brcmfmac: fix parsing rsn ie for ap mode.

Sivaram Nair <sivaramn@nvidia.com>
    cpuidle / coupled: fix ready counter decrement

Ian Campbell <Ian.Campbell@citrix.com>
    xen/netfront: improve truesize tracking

Kees Cook <keescook@chromium.org>
    audit: create explicit AUDIT_SECCOMP event type

Chris Verges <kg4ysn@gmail.com>
    hwmon: (lm73} Detect and report i2c bus errors

Malcolm Priestley <tvboxspy@gmail.com>
    staging: vt6656: 64bit fixes: vCommandTimerWait change calculation of timer.

Malcolm Priestley <tvboxspy@gmail.com>
    staging: vt6656: 64bit fixes: key.c/h change unsigned long to u32

Malcolm Priestley <tvboxspy@gmail.com>
    staging: vt6656: 64 bit fixes: fix long warning messages.

Malcolm Priestley <tvboxspy@gmail.com>
    staging: vt6656: 64 bit fixes : correct all type sizes

Malcolm Priestley <tvboxspy@gmail.com>
    staging: vt6656: 64 bit fixes: use u32 for QWORD definition.

Malcolm Priestley <tvboxspy@gmail.com>
    staging: vt6656: [BUG] out of bound array reference in RFbSetPower.

Joe Thornber <ejt@redhat.com>
    dm thin: replace dm_cell_release_singleton with cell_defer_except

Alasdair G Kergon <agk@redhat.com>
    dm ioctl: prevent unsafe change to dm_ioctl data_size

Mikulas Patocka <mpatocka@redhat.com>
    dm persistent data: rename node to btree_node

Mike Snitzer <snitzer@redhat.com>
    dm: disable WRITE SAME

Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
    RDMA/nes: Fix for terminate timer crash

Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
    RDMA/nes: Fix for crash when registering zero length MR for CQ

Daniel Vetter <daniel.vetter@ffwll.ch>
    drm/i915: Revert shrinker changes from "Track unbound pages"

Chris Wilson <chris@chris-wilson.co.uk>
    drm/i915; Only increment the user-pin-count after successfully pinning the bo

Chris Wilson <chris@chris-wilson.co.uk>
    drm: Only evict the blocks required to create the requested hole

Seung-Woo Kim <sw0312.kim@samsung.com>
    drm/prime: drop reference on imported dma-buf come from gem

Dave Airlie <airlied@redhat.com>
    drm/i915: fix flags in dma buf exporting

Daniel Vetter <daniel.vetter@ffwll.ch>
    drm/i915: don't disable disconnected outputs

Chris Wilson <chris@chris-wilson.co.uk>
    drm/i915: Flush outstanding unpin tasks before pageflipping

Chris Wilson <chris@chris-wilson.co.uk>
    drm/i915: Close race between processing unpin task and queueing the flip

Mel Gorman <mgorman@suse.de>
    mm: compaction: partially revert capture of suitable high-order page

Paulo Zanoni <paulo.r.zanoni@intel.com>
    drm/i915: make the panel fitter work on pipes B and C on IVB

Aaro Koskinen <aaro.koskinen@iki.fi>
    drm/nouveau: fix init with agpgart-uninorth

Niels Ole Salscheider <niels_ole@salscheider-online.de>
    drm/radeon: Properly handle DDC probe for DP bridges

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: add connector table for Mac G4 Silver

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: add WAIT_UNTIL to evergreen VM safe reg list

Jerome Glisse <jglisse@redhat.com>
    drm/radeon: avoid deadlock in pm path when waiting for fence

Jerome Glisse <jglisse@redhat.com>
    drm/radeon: don't leave fence blocked process on failed GPU reset

Jerome Glisse <jglisse@redhat.com>
    drm/radeon: restore modeset late in GPU reset path

Jerome Glisse <jglisse@redhat.com>
    drm/radeon: fix amd afusion gpu setup aka sumo v2

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: fix eDP clk and lane setup for scaled modes

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon/dce32+: use fractional fb dividers for high clocks

Christian König <deathsimple@vodafone.de>
    drm/radeon: stop page faults from hanging the system (v2)

Woodhouse, David <david.woodhouse@intel.com>
    intel-iommu: Free old page tables before creating superpage

Dan Williams <dcbw@redhat.com>
    i2400m: add Intel 6150 device IDs

Alexey Khoroshilov <khoroshilov@ispras.ru>
    jffs2: hold erase_completion_lock on exit

Trond Myklebust <Trond.Myklebust@netapp.com>
    SUNRPC: Ensure we release the socket write lock if the rpc_task exits early

Trond Myklebust <Trond.Myklebust@netapp.com>
    SUNRPC: Ensure that we free the rpc_task after cleanups are done

J. Bruce Fields <bfields@redhat.com>
    svcrpc: Revert "sunrpc/cache.h: replace simple_strtoul"

Stanislav Kinsbursky <skinsbursky@parallels.com>
    SUNRPC: continue run over clients list on PipeFS event instead of break

Trond Myklebust <Trond.Myklebust@netapp.com>
    SUNRPC: Fix validity issues with rpc_pipefs sb->s_fs_info

Tomi Valkeinen <tomi.valkeinen@ti.com>
    OMAP: board-files: fix i2c_bus for tfp410

Pawel Moll <pawel.moll@arm.com>
    kbuild: Do not remove vmlinux when cleaning external module

Wolfram Sang <w.sang@pengutronix.de>
    mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems

Nathan Williams <nathan@traverse.com.au>
    mtd cs553x_nand: Initialise ecc.strength before nand_scan()

Theodore Ts'o <tytso@mit.edu>
    ext4: fix possible use after free with metadata csum

Eugene Shatokhin <eugene.shatokhin@rosalab.ru>
    ext4: fix memory leak in ext4_xattr_set_acl()'s error path

Geert Uytterhoeven <geert@linux-m68k.org>
    mfd: Remove Unicode Byte Order Marks from da9055

Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
    mfd: Only unregister platform devices allocated by the mfd core

Mark Brown <broonie@opensource.wolfsonmicro.com>
    mfd: wm8994: Add support for WM1811 rev E

Chris Boot <bootc@bootc.net>
    sbp-target: fix error path in sbp_make_tpg()

Yi Zou <yi.zou@intel.com>
    target/tcm_fc: fix the lockdep warning due to inconsistent lock state

Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    target/file: Fix 32-bit highmem breakage for SGL -> iovec mapping

Xiaotian Feng <xtfeng@gmail.com>
    libata: fix Null pointer dereference on disk error

Aaron Lu <aaron.lu@intel.com>
    libata: set dma_mode to 0xff in reset

Maxime Bizon <mbizon@freebox.fr>
    pstore/ram: Fix undefined usage of rounddown_pow_of_two(0)

Jack Morgenstein <jackm@dev.mellanox.co.il>
    mlx4_core: Fix potential deadlock in mlx4_eq_int()

Jack Morgenstein <jackm@dev.mellanox.co.il>
    IB/mlx4: Fix spinlock order to avoid lockdep warnings

Mattia Dongili <malattia@linux.it>
    sony-laptop: fix SNC buffer calls when SN06 returns Integers

Mikael Pettersson <mikpe@it.uu.se>
    sata_promise: fix hardreset lockdep error

Steve Hodgson <steve@purestorage.com>
    qla2xxx: Look up LUN for abort requests

Wei Yongjun <yongjun_wei@trendmicro.com.cn>
    iscsit: use GFP_ATOMIC under spin lock

Roland Dreier <roland@purestorage.com>
    iscsi-target: Always send a response before terminating iSCSI connection

Steve Hodgson <steve@purestorage.com>
    iscsi-target: Fix bug in handling of ExpStatSN ACK during u32 wrap-around

Steve Hodgson <steve@purestorage.com>
    SCSI: qla2xxx: Free rsp_data even on error in qla2x00_process_loopback()

Giridhar Malavali <giridhar.malavali@qlogic.com>
    SCSI: qla2xxx: Change in setting UNLOADING flag and FC vports logout sequence while unloading qla2xxx driver.

David Jeffery <djeffery@redhat.com>
    SCSI: qla2xxx: Test and clear FCPORT_UPDATE_NEEDED atomically.

Armen Baloyan <armen.baloyan@qlogic.com>
    SCSI: qla2xxx: Properly set result field of bsg_job reply structure for success and failure.

Sasha Levin <sasha.levin@oracle.com>
    SCSI: prevent stack buffer overflow in host_reset

Xi Wang <xi.wang@gmail.com>
    SCSI: mvsas: fix undefined bit shift

Sangbeom Kim <sbkim73@samsung.com>
    regulator: s2mps11: Fix ramp delay value shift operation

Lars-Peter Clausen <lars@metafoo.de>
    ASoC: sigmadsp: Fix endianness conversion issue

Mark Brown <broonie@opensource.wolfsonmicro.com>
    ASoC: wm8994: Use the same DCS codes for all WM1811 variants

Bjørn Mork <bjorn@mork.no>
    watchdog: Fix disable/enable regression

Stephan Gatzka <stephan.gatzka@gmail.com>
    firewire: net: Fix handling of fragmented multicast/broadcast packets.

Christian Lamparter <chunkeey@googlemail.com>
    carl9170: fix -EINVAL bailout during init with !CONFIG_MAC80211_MESH

Stanislaw Gruszka <sgruszka@redhat.com>
    mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL

Sujith Manoharan <c_manoha@qca.qualcomm.com>
    ath9k_hw: Fix RX gain initvals for AR9485

Felix Fietkau <nbd@openwrt.org>
    ath9k_hw: Fix signal strength / channel noise reporting

Gabor Juhos <juhosg@openwrt.org>
    ath9k: ar9003: fix OTP register offsets for AR9340

Felix Fietkau <nbd@openwrt.org>
    Revert "ath9k_hw: Update AR9003 high_power tx gain table"

Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
    ath9k_hw: Enable hw PLL power save for AR9462

Max Filippov <jcmvbkbc@gmail.com>
    mm: bootmem: fix free_all_bootmem_core() with odd bitmap alignment

Laura Abbott <lauraa@codeaurora.org>
    mm: use aligned zone start for pfn_to_bitidx calculation

Jason Liu <r64343@freescale.com>
    mm: compaction: fix echo 1 > compact_memory return error issue

Huacai Chen <chenhc@lemote.com>
    MIPS: Fix poweroff failure when HOTPLUG_CPU configured.

Sebastian Ott <sebott@linux.vnet.ibm.com>
    s390/cio: fix pgid reserved check

Alex Williamson <alex.williamson@redhat.com>
    KVM: Fix user memslot overlap check

Scott Wood <scottwood@freescale.com>
    KVM: PPC: e500: fix allocation size error on g2h_tlb1_map

Gabor Juhos <juhosg@openwrt.org>
    powerpc: Add missing NULL terminator to avoid boot panic on PPC40x

Shan Hai <shan.hai@windriver.com>
    powerpc/vdso: Remove redundant locking in update_vsyscall_tz()

Anton Blanchard <anton@samba.org>
    powerpc: Fix CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n build

Christian Borntraeger <borntraeger@de.ibm.com>
    s390/kvm: Fix address space mixup

Christian Borntraeger <borntraeger@de.ibm.com>
    s390/kvm: dont announce RRBM support

Helmut Schaa <helmut.schaa@googlemail.com>
    rt2x00: Only specify interface combinations if more then one interface is possible

Rafał Miłecki <zajec5@gmail.com>
    bcma: mips: fix clearing device IRQ

Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    iwlwifi: silently ignore fw flaws in Tx path

Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    iwlwifi: don't handle masked interrupt

Felix Fietkau <nbd@openwrt.org>
    ath5k: fix tx path skb leaks

Mark Brown <broonie@opensource.wolfsonmicro.com>
    regulator: wm831x: Set the new rather than old value for DVS VSEL


-------------

Diffstat:

 Documentation/power/runtime_pm.txt                 |   9 +-
 Makefile                                           |  12 +-
 arch/arm/mach-omap2/board-3430sdp.c                |   1 +
 arch/arm/mach-omap2/board-am3517evm.c              |   1 +
 arch/arm/mach-omap2/board-cm-t35.c                 |   1 +
 arch/arm/mach-omap2/board-devkit8000.c             |   1 +
 arch/arm/mach-omap2/board-omap3evm.c               |   1 +
 arch/arm/mach-omap2/board-omap3stalker.c           |   1 +
 arch/arm/mach-pxa/include/mach/mfp-pxa27x.h        |   3 +
 arch/arm/mach-pxa/pxa27x.c                         |   4 +-
 arch/mips/kernel/process.c                         |   4 +-
 arch/mips/mm/tlbex.c                               |  16 --
 arch/powerpc/kernel/head_64.S                      |   2 +-
 arch/powerpc/kernel/time.c                         |   5 -
 arch/powerpc/kvm/44x_emulate.c                     |   2 +
 arch/powerpc/kvm/e500_tlb.c                        |   2 +-
 arch/powerpc/platforms/40x/ppc40x_simple.c         |   3 +-
 arch/s390/kernel/entry64.S                         |  25 ++-
 arch/s390/kvm/kvm-s390.c                           |   2 +-
 drivers/acpi/scan.c                                |   7 +-
 drivers/ata/libata-core.c                          |   1 +
 drivers/ata/libata-eh.c                            |   1 +
 drivers/ata/libata-scsi.c                          |   6 +-
 drivers/ata/sata_promise.c                         |  15 +-
 drivers/base/power/main.c                          |   9 +-
 drivers/base/regmap/regmap-debugfs.c               |   2 +-
 drivers/bcma/driver_mips.c                         |   2 +-
 drivers/block/aoe/aoeblk.c                         |  17 +-
 drivers/block/rbd.c                                |  63 +++++---
 drivers/block/rbd_types.h                          |   2 -
 drivers/cpuidle/coupled.c                          |   2 +-
 drivers/edac/edac_mc_sysfs.c                       |   2 +-
 drivers/firewire/net.c                             |  13 +-
 drivers/gpu/drm/drm_mm.c                           |  45 ++----
 drivers/gpu/drm/exynos/exynos_drm_dmabuf.c         |   5 +
 drivers/gpu/drm/i915/i915_debugfs.c                |   4 +-
 drivers/gpu/drm/i915/i915_drv.c                    |   2 +-
 drivers/gpu/drm/i915/i915_drv.h                    |   3 +-
 drivers/gpu/drm/i915/i915_gem.c                    |  25 ++-
 drivers/gpu/drm/i915/i915_gem_dmabuf.c             |   7 +-
 drivers/gpu/drm/i915/i915_irq.c                    |   4 +-
 drivers/gpu/drm/i915/i915_reg.h                    |   2 +
 drivers/gpu/drm/i915/intel_display.c               | 136 +++++++++-------
 drivers/gpu/drm/i915/intel_drv.h                   |   9 +-
 drivers/gpu/drm/i915/intel_lvds.c                  |  10 +-
 drivers/gpu/drm/i915/intel_pm.c                    |  23 ++-
 .../gpu/drm/nouveau/core/include/subdev/bios/pll.h |   2 +
 drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c   |   2 +
 drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c      |   6 +-
 drivers/gpu/drm/nouveau/core/subdev/instmem/base.c |  35 ++++-
 drivers/gpu/drm/nouveau/nouveau_bo.c               |   2 +-
 drivers/gpu/drm/nouveau/nouveau_fence.h            |   1 +
 drivers/gpu/drm/nouveau/nouveau_prime.c            |   1 +
 drivers/gpu/drm/nouveau/nv04_dfp.c                 |   2 +-
 drivers/gpu/drm/nouveau/nv10_fence.c               |   8 +
 drivers/gpu/drm/nouveau/nv50_fence.c               |   1 +
 drivers/gpu/drm/radeon/atombios_crtc.c             |   2 +
 drivers/gpu/drm/radeon/atombios_encoders.c         |   2 +-
 drivers/gpu/drm/radeon/evergreen.c                 |  18 ++-
 drivers/gpu/drm/radeon/evergreen_cs.c              |   1 +
 drivers/gpu/drm/radeon/evergreend.h                |   5 +
 drivers/gpu/drm/radeon/ni.c                        |  16 +-
 drivers/gpu/drm/radeon/nid.h                       |  11 ++
 drivers/gpu/drm/radeon/radeon.h                    |   3 +-
 drivers/gpu/drm/radeon/radeon_combios.c            |  51 ++++++
 drivers/gpu/drm/radeon/radeon_connectors.c         |  10 +-
 drivers/gpu/drm/radeon/radeon_device.c             |  17 +-
 drivers/gpu/drm/radeon/radeon_display.c            |  13 +-
 drivers/gpu/drm/radeon/radeon_fence.c              |  49 ++++--
 drivers/gpu/drm/radeon/radeon_i2c.c                |  10 +-
 drivers/gpu/drm/radeon/radeon_legacy_encoders.c    |   8 +
 drivers/gpu/drm/radeon/radeon_mode.h               |   5 +-
 drivers/gpu/drm/radeon/radeon_pm.c                 |  15 +-
 drivers/gpu/drm/radeon/radeon_prime.c              |   1 +
 drivers/gpu/drm/radeon/si.c                        |  25 ++-
 drivers/gpu/drm/radeon/sid.h                       |  14 ++
 drivers/gpu/drm/udl/udl_connector.c                |  17 +-
 drivers/hid/hid-ids.h                              |   3 +
 drivers/hid/usbhid/hid-quirks.c                    |   1 +
 drivers/hwmon/lm73.c                               |  16 +-
 drivers/infiniband/hw/mlx4/cm.c                    |   4 +-
 drivers/infiniband/hw/nes/nes.h                    |   1 +
 drivers/infiniband/hw/nes/nes_hw.c                 |   9 +-
 drivers/infiniband/hw/nes/nes_verbs.c              |   9 +-
 drivers/iommu/intel-iommu.c                        |  11 +-
 drivers/md/dm-bio-prison.c                         |  25 ---
 drivers/md/dm-bio-prison.h                         |   1 -
 drivers/md/dm-ioctl.c                              |   8 +
 drivers/md/dm-table.c                              |   2 +
 drivers/md/dm-thin.c                               | 101 ++++++++----
 drivers/md/persistent-data/dm-btree-internal.h     |  16 +-
 drivers/md/persistent-data/dm-btree-remove.c       |  50 +++---
 drivers/md/persistent-data/dm-btree-spine.c        |   6 +-
 drivers/md/persistent-data/dm-btree.c              |  22 +--
 drivers/mfd/mfd-core.c                             |  15 +-
 drivers/mfd/wm8994-core.c                          |   1 +
 drivers/mtd/nand/cs553x_nand.c                     |   3 +-
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c              |   9 ++
 drivers/net/ethernet/mellanox/mlx4/cmd.c           |   9 +-
 drivers/net/ethernet/mellanox/mlx4/eq.c            |  10 +-
 drivers/net/wimax/i2400m/i2400m-usb.h              |   3 +
 drivers/net/wimax/i2400m/usb.c                     |   6 +
 drivers/net/wireless/ath/ath5k/base.c              |   4 +-
 drivers/net/wireless/ath/ath5k/mac80211-ops.c      |   2 +-
 .../net/wireless/ath/ath9k/ar9003_2p2_initvals.h   | 172 ++++++++++-----------
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.h     |   6 +-
 drivers/net/wireless/ath/ath9k/ar9003_hw.c         |   6 +-
 drivers/net/wireless/ath/ath9k/calib.c             |   1 +
 drivers/net/wireless/ath/ath9k/calib.h             |   3 +
 drivers/net/wireless/ath/carl9170/fw.c             |   6 +-
 drivers/net/wireless/b43/b43.h                     |   5 +
 drivers/net/wireless/b43/main.c                    |  54 +++++--
 drivers/net/wireless/b43/main.h                    |   5 +-
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c  |   5 +-
 drivers/net/wireless/iwlwifi/dvm/tx.c              |  71 ++++-----
 drivers/net/wireless/iwlwifi/pcie/rx.c             |  13 +-
 drivers/net/wireless/mwifiex/sta_ioctl.c           |  21 ++-
 drivers/net/wireless/rt2x00/rt2800lib.c            |   3 +-
 drivers/net/wireless/rt2x00/rt2x00dev.c            |  10 +-
 drivers/net/xen-netfront.c                         |  27 +---
 drivers/platform/x86/samsung-laptop.c              |  10 ++
 drivers/platform/x86/sony-laptop.c                 |  15 +-
 drivers/regulator/max8997.c                        |  36 ++---
 drivers/regulator/max8998.c                        |  44 +++---
 drivers/regulator/s2mps11.c                        |  10 +-
 drivers/regulator/wm831x-dcdc.c                    |   2 +-
 drivers/s390/cio/device_pgid.c                     |  10 +-
 drivers/scsi/mvsas/mv_94xx.h                       |  14 +-
 drivers/scsi/mvsas/mv_sas.h                        |   2 +-
 drivers/scsi/qla2xxx/qla_attr.c                    |   3 +-
 drivers/scsi/qla2xxx/qla_bsg.c                     |  72 ++++-----
 drivers/scsi/qla2xxx/qla_os.c                      |   7 +-
 drivers/scsi/qla2xxx/qla_target.c                  |  21 ++-
 drivers/scsi/scsi_sysfs.c                          |  11 +-
 drivers/staging/comedi/Kconfig                     |   1 +
 drivers/staging/comedi/comedi_fops.c               |   3 +
 drivers/staging/comedi/drivers/comedi_test.c       |   2 +-
 drivers/staging/comedi/drivers/ni_pcimio.c         |  16 +-
 drivers/staging/omapdrm/omap_gem_dmabuf.c          |   5 +
 drivers/staging/rtl8712/usb_intf.c                 |   2 +
 drivers/staging/speakup/synth.c                    |   4 +-
 drivers/staging/vt6656/dpc.c                       |   4 +-
 drivers/staging/vt6656/key.c                       |  53 +++++--
 drivers/staging/vt6656/key.h                       |   8 +-
 drivers/staging/vt6656/mac.c                       |   6 +-
 drivers/staging/vt6656/rf.c                        |   3 +
 drivers/staging/vt6656/rxtx.c                      |  18 ++-
 drivers/staging/vt6656/ttype.h                     |  16 +-
 drivers/staging/vt6656/wcmd.c                      |  20 +--
 drivers/staging/vt6656/wpa2.h                      |   4 +-
 drivers/staging/zram/zram_drv.c                    | 152 +++++++++---------
 drivers/target/iscsi/iscsi_target.c                |   4 +-
 drivers/target/iscsi/iscsi_target_erl2.c           |   2 +-
 drivers/target/iscsi/iscsi_target_login.c          |   8 +-
 drivers/target/iscsi/iscsi_target_nego.c           |  10 +-
 drivers/target/iscsi/iscsi_target_tmr.c            |   4 +-
 drivers/target/sbp/sbp_target.c                    |  17 +-
 drivers/target/target_core_file.c                  |   9 +-
 drivers/target/tcm_fc/tfc_sess.c                   |   2 +-
 drivers/usb/class/cdc-acm.c                        |   3 +
 drivers/usb/core/hub.c                             | 120 +++++++++++---
 drivers/usb/core/quirks.c                          |   3 +
 drivers/usb/gadget/dummy_hcd.c                     |   9 +-
 drivers/usb/host/ehci-pci.c                        |  39 ++---
 drivers/usb/host/xhci-hub.c                        |  38 ++++-
 drivers/usb/host/xhci-mem.c                        |   2 +
 drivers/usb/host/xhci-ring.c                       |   9 ++
 drivers/usb/host/xhci.c                            |  10 ++
 drivers/usb/musb/musb_core.c                       |   5 +-
 drivers/usb/serial/ftdi_sio.c                      |   2 +
 drivers/usb/serial/ftdi_sio_ids.h                  |   6 +
 drivers/usb/serial/option.c                        |  18 ++-
 drivers/video/mxsfb.c                              |   3 +-
 fs/buffer.c                                        |   1 +
 fs/ceph/addr.c                                     |   9 ++
 fs/ceph/caps.c                                     |  16 +-
 fs/ceph/inode.c                                    |  15 +-
 fs/ceph/mds_client.c                               |   9 +-
 fs/ceph/super.c                                    |   2 -
 fs/eventpoll.c                                     |  22 ++-
 fs/ext4/acl.c                                      |   6 +-
 fs/ext4/extents.c                                  |  22 ++-
 fs/ext4/ialloc.c                                   |   2 +-
 fs/ext4/namei.c                                    |   5 +-
 fs/ext4/super.c                                    |  26 ++--
 fs/jbd2/transaction.c                              |   3 +-
 fs/jffs2/nodemgmt.c                                |   6 +-
 fs/pstore/ram.c                                    |  12 +-
 fs/udf/inode.c                                     |  11 +-
 include/drm/drm_mm.h                               |   2 +-
 include/linux/audit.h                              |   3 +-
 include/linux/ceph/libceph.h                       |   2 -
 include/linux/compaction.h                         |   4 +-
 include/linux/mfd/da9055/core.h                    |   2 +-
 include/linux/mfd/da9055/pdata.h                   |   2 +-
 include/linux/mfd/da9055/reg.h                     |   2 +-
 include/linux/mm.h                                 |   1 -
 include/linux/sunrpc/cache.h                       |   6 +-
 include/net/mac80211.h                             |   5 +
 include/uapi/linux/audit.h                         |   1 +
 include/video/omap-panel-tfp410.h                  |   2 +-
 kernel/auditsc.c                                   |  14 +-
 kernel/watchdog.c                                  |  11 +-
 mm/bootmem.c                                       |  24 ++-
 mm/compaction.c                                    |  98 ++----------
 mm/internal.h                                      |   1 -
 mm/page_alloc.c                                    |  37 ++---
 net/ceph/ceph_common.c                             |   3 +-
 net/ceph/messenger.c                               |  72 +++++----
 net/ceph/osd_client.c                              |  93 ++++-------
 net/ceph/osdmap.c                                  |  31 ++--
 net/mac80211/ibss.c                                |   9 +-
 net/mac80211/ieee80211_i.h                         |  10 +-
 net/mac80211/iface.c                               |  28 ++--
 net/mac80211/scan.c                                |  34 ++--
 net/mac80211/sta_info.c                            |  46 +++++-
 net/mac80211/sta_info.h                            |   3 +-
 net/mac80211/status.c                              |   6 +-
 net/sunrpc/clnt.c                                  |   2 +-
 net/sunrpc/rpc_pipe.c                              |   7 +-
 net/sunrpc/sched.c                                 |  30 +++-
 net/sunrpc/xprt.c                                  |  12 +-
 sound/arm/pxa2xx-ac97-lib.c                        |  26 +++-
 sound/pci/hda/hda_intel.c                          |  13 +-
 sound/pci/hda/patch_conexant.c                     |  16 --
 sound/soc/codecs/arizona.c                         |   9 +-
 sound/soc/codecs/arizona.h                         |  18 +--
 sound/soc/codecs/sigmadsp.c                        |   2 +-
 sound/soc/codecs/sta529.c                          |   9 +-
 sound/soc/codecs/wm2000.c                          |   4 +-
 sound/soc/codecs/wm2200.c                          |   8 +-
 sound/soc/codecs/wm5100.c                          |   6 -
 sound/soc/codecs/wm8994.c                          |  16 +-
 sound/soc/soc-pcm.c                                |   1 +
 virt/kvm/kvm_main.c                                |  13 +-
 235 files changed, 2063 insertions(+), 1365 deletions(-)

[ 001/221] regulator: wm831x: Set the new rather than old value for DVS VSEL

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit 13ae633cf729b0ecb677b75b04886ff8fada8fad upstream.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/wm831x-dcdc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -290,7 +290,7 @@ static int wm831x_buckv_set_voltage_sel(
 	if (vsel > dcdc->dvs_vsel) {
 		ret = wm831x_set_bits(wm831x, dvs_reg,
 				      WM831X_DC1_DVS_VSEL_MASK,
-				      dcdc->dvs_vsel);
+				      vsel);
 		if (ret == 0)
 			dcdc->dvs_vsel = vsel;
 		else

[ 002/221] ath5k: fix tx path skb leaks

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit 596ab5ec3bf10a22be30d7cb1d903a4b83fd607c upstream.

ieee80211_free_txskb() needs to be used instead of dev_kfree_skb_any for
tx packets passed to the driver from mac80211

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath5k/base.c         |    4 ++--
 drivers/net/wireless/ath/ath5k/mac80211-ops.c |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -848,7 +848,7 @@ ath5k_txbuf_free_skb(struct ath5k_hw *ah
 		return;
 	dma_unmap_single(ah->dev, bf->skbaddr, bf->skb->len,
 			DMA_TO_DEVICE);
-	dev_kfree_skb_any(bf->skb);
+	ieee80211_free_txskb(ah->hw, bf->skb);
 	bf->skb = NULL;
 	bf->skbaddr = 0;
 	bf->desc->ds_data = 0;
@@ -1575,7 +1575,7 @@ ath5k_tx_queue(struct ieee80211_hw *hw,
 	return;
 
 drop_packet:
-	dev_kfree_skb_any(skb);
+	ieee80211_free_txskb(hw, skb);
 }
 
 static void
--- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c
+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
@@ -62,7 +62,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct
 	u16 qnum = skb_get_queue_mapping(skb);
 
 	if (WARN_ON(qnum >= ah->ah_capabilities.cap_queues.q_tx_num)) {
-		dev_kfree_skb_any(skb);
+		ieee80211_free_txskb(hw, skb);
 		return;
 	}
 

[ 003/221] iwlwifi: dont handle masked interrupt

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit 25a172655f837bdb032e451f95441bb4acec51bb upstream.

This can lead to a panic if the driver isn't ready to
handle them. Since our interrupt line is shared, we can get
an interrupt at any time (and CONFIG_DEBUG_SHIRQ checks
that even when the interrupt is being freed).

If the op_mode has gone away, we musn't call it. To avoid
this the transport disables the interrupts when the hw is
stopped and the op_mode is leaving.
If there is an event that would cause an interrupt the INTA
register is updated regardless of the enablement of the
interrupts: even if the interrupts are disabled, the INTA
will be changed, but the device won't issue an interrupt.
But the ISR can be called at any time, so we ought ignore
the value in the INTA otherwise we can call the op_mode
after it was freed.

I found this bug when the op_mode_start failed, and called
iwl_trans_stop_hw(trans, true). Then I played with the
RFKILL button, and removed the module.
While removing the module, the IRQ is freed, and the ISR is
called (CONFIG_DEBUG_SHIRQ enabled). Panic.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/pcie/rx.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -927,12 +927,20 @@ static irqreturn_t iwl_isr(int irq, void
 	 *    back-to-back ISRs and sporadic interrupts from our NIC.
 	 * If we have something to service, the tasklet will re-enable ints.
 	 * If we *don't* have something, we'll re-enable before leaving here. */
-	inta_mask = iwl_read32(trans, CSR_INT_MASK);  /* just for debug */
+	inta_mask = iwl_read32(trans, CSR_INT_MASK);
 	iwl_write32(trans, CSR_INT_MASK, 0x00000000);
 
 	/* Discover which interrupts are active/pending */
 	inta = iwl_read32(trans, CSR_INT);
 
+	if (inta & (~inta_mask)) {
+		IWL_DEBUG_ISR(trans,
+			      "We got a masked interrupt (0x%08x)...Ack and ignore\n",
+			      inta & (~inta_mask));
+		iwl_write32(trans, CSR_INT, inta & (~inta_mask));
+		inta &= inta_mask;
+	}
+
 	/* Ignore interrupt if there's nothing in NIC to service.
 	 * This may be due to IRQ shared with another device,
 	 * or due to sporadic interrupts thrown from our NIC. */
@@ -1015,7 +1023,7 @@ irqreturn_t iwl_isr_ict(int irq, void *d
 	 * If we have something to service, the tasklet will re-enable ints.
 	 * If we *don't* have something, we'll re-enable before leaving here.
 	 */
-	inta_mask = iwl_read32(trans, CSR_INT_MASK);  /* just for debug */
+	inta_mask = iwl_read32(trans, CSR_INT_MASK);
 	iwl_write32(trans, CSR_INT_MASK, 0x00000000);
 
 

[ 004/221] iwlwifi: silently ignore fw flaws in Tx path

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit 27edb1accf5695ff00a32c85c4a00ac7e1e7f298 upstream.

We know that we have issues with the fw in the reclaim path.
This is why iwl_reclaim doesn't complain too loud when it
happens since it is recoverable. Somehow, the caller of
iwl_reclaim however WARNed when it happens. This doesn't
make any sense.

When I digged into the history of that code, I discovered
that this bug occurs only when we receive a BA notification.
So move the W/A in the BA notification handling code where
it was before.

This patch addresses:
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2387

Reported-by: Florian Reitmeir <florian@reitmeir.org>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/dvm/tx.c |   49 ++++++++++++----------------------
 1 file changed, 18 insertions(+), 31 deletions(-)

--- a/drivers/net/wireless/iwlwifi/dvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/dvm/tx.c
@@ -1100,29 +1100,6 @@ static void iwl_check_abort_status(struc
 	}
 }
 
-static int iwl_reclaim(struct iwl_priv *priv, int sta_id, int tid,
-		       int txq_id, int ssn, struct sk_buff_head *skbs)
-{
-	if (unlikely(txq_id >= IWLAGN_FIRST_AMPDU_QUEUE &&
-		     tid != IWL_TID_NON_QOS &&
-		     txq_id != priv->tid_data[sta_id][tid].agg.txq_id)) {
-		/*
-		 * FIXME: this is a uCode bug which need to be addressed,
-		 * log the information and return for now.
-		 * Since it is can possibly happen very often and in order
-		 * not to fill the syslog, don't use IWL_ERR or IWL_WARN
-		 */
-		IWL_DEBUG_TX_QUEUES(priv,
-			"Bad queue mapping txq_id=%d, agg_txq[sta:%d,tid:%d]=%d\n",
-			txq_id, sta_id, tid,
-			priv->tid_data[sta_id][tid].agg.txq_id);
-		return 1;
-	}
-
-	iwl_trans_reclaim(priv->trans, txq_id, ssn, skbs);
-	return 0;
-}
-
 int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb,
 			       struct iwl_device_cmd *cmd)
 {
@@ -1184,9 +1161,8 @@ int iwlagn_rx_reply_tx(struct iwl_priv *
 						  next_reclaimed);
 		}
 
-		/*we can free until ssn % q.n_bd not inclusive */
-		WARN_ON_ONCE(iwl_reclaim(priv, sta_id, tid,
-					 txq_id, ssn, &skbs));
+		iwl_trans_reclaim(priv->trans, txq_id, ssn, &skbs);
+
 		iwlagn_check_ratid_empty(priv, sta_id, tid);
 		freed = 0;
 
@@ -1311,16 +1287,27 @@ int iwlagn_rx_reply_compressed_ba(struct
 		return 0;
 	}
 
+	if (unlikely(scd_flow != agg->txq_id)) {
+		/*
+		 * FIXME: this is a uCode bug which need to be addressed,
+		 * log the information and return for now.
+		 * Since it is can possibly happen very often and in order
+		 * not to fill the syslog, don't use IWL_ERR or IWL_WARN
+		 */
+		IWL_DEBUG_TX_QUEUES(priv,
+				    "Bad queue mapping txq_id=%d, agg_txq[sta:%d,tid:%d]=%d\n",
+				    scd_flow, sta_id, tid, agg->txq_id);
+		spin_unlock(&priv->sta_lock);
+		return 0;
+	}
+
 	__skb_queue_head_init(&reclaimed_skbs);
 
 	/* Release all TFDs before the SSN, i.e. all TFDs in front of
 	 * block-ack window (we assume that they've been successfully
 	 * transmitted ... if not, it's too late anyway). */
-	if (iwl_reclaim(priv, sta_id, tid, scd_flow,
-			ba_resp_scd_ssn, &reclaimed_skbs)) {
-		spin_unlock(&priv->sta_lock);
-		return 0;
-	}
+	iwl_trans_reclaim(priv->trans, scd_flow, ba_resp_scd_ssn,
+			  &reclaimed_skbs);
 
 	IWL_DEBUG_TX_REPLY(priv, "REPLY_COMPRESSED_BA [%d] Received from %pM, "
 			   "sta_id = %d\n",

[ 005/221] bcma: mips: fix clearing device IRQ

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rafał Miłecki <zajec5@gmail.com>

commit cbbc0138efe1dcd5426b8fc5d87741f5057aee72 upstream.

We were using wrong IRQ number so clearing wasn't working at all.
Depending on a platform this could result in a one device having two
interrupts assigned. On BCM4706 this resulted in all IRQs being broken.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bcma/driver_mips.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -115,7 +115,7 @@ static void bcma_core_mips_set_irq(struc
 			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
 			    ~(1 << irqflag));
 	else
-		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
+		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0);
 
 	/* assign the new one */
 	if (irq == 0) {

[ 006/221] rt2x00: Only specify interface combinations if more then one interface is possible

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helmut Schaa <helmut.schaa@googlemail.com>

commit f5685ba675449b072feab6a5391a9ef9f604bc94 upstream.

Otherwise rt2500* triggers a warning in cfg80211, from net/wireless/core.c:

	/* Combinations with just one interface aren't real */
	if (WARN_ON(c->max_interfaces < 2))

This was introduced in commit 55d2e9da744ba11eae900b4bfc2da72eace3c1e1:
rt2x00: Replace open coded interface checking with interface combinations.

Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rt2x00/rt2x00dev.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1123,6 +1123,9 @@ static inline void rt2x00lib_set_if_comb
 	struct ieee80211_iface_limit *if_limit;
 	struct ieee80211_iface_combination *if_combination;
 
+	if (rt2x00dev->ops->max_ap_intf < 2)
+		return;
+
 	/*
 	 * Build up AP interface limits structure.
 	 */

[ 007/221] s390/kvm: dont announce RRBM support

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Borntraeger <borntraeger@de.ibm.com>

commit 87cac8f879a5ecd7109dbe688087e8810b3364eb upstream.

Newer kernels (linux-next with the transparent huge page patches)
use rrbm if the feature is announced via feature bit 66.
RRBM will cause intercepts, so KVM does not handle it right now,
causing an illegal instruction in the guest.
The  easy solution is to disable the feature bit for the guest.

This fixes bugs like:
Kernel BUG at 0000000000124c2a [verbose debug info unavailable]
illegal operation: 0001 [#1] SMP
Modules linked in: virtio_balloon virtio_net ipv6 autofs4
CPU: 0 Not tainted 3.5.4 #1
Process fmempig (pid: 659, task: 000000007b712fd0, ksp: 000000007bed3670)
Krnl PSW : 0704d00180000000 0000000000124c2a (pmdp_clear_flush_young+0x5e/0x80)
     R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 EA:3
     00000000003cc000 0000000000000004 0000000000000000 0000000079800000
     0000000000040000 0000000000000000 000000007bed3918 000000007cf40000
     0000000000000001 000003fff7f00000 000003d281a94000 000000007bed383c
     000000007bed3918 00000000005ecbf8 00000000002314a6 000000007bed36e0
 Krnl Code:>0000000000124c2a: b9810025          ogr     %r2,%r5
           0000000000124c2e: 41343000           la      %r3,0(%r4,%r3)
           0000000000124c32: a716fffa           brct    %r1,124c26
           0000000000124c36: b9010022           lngr    %r2,%r2
           0000000000124c3a: e3d0f0800004       lg      %r13,128(%r15)
           0000000000124c40: eb22003f000c       srlg    %r2,%r2,63
[ 2150.713198] Call Trace:
[ 2150.713223] ([<00000000002312c4>] page_referenced_one+0x6c/0x27c)
[ 2150.713749]  [<0000000000233812>] page_referenced+0x32a/0x410
[...]

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
CC: Alex Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kvm/kvm-s390.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -997,7 +997,7 @@ static int __init kvm_s390_init(void)
 	}
 	memcpy(facilities, S390_lowcore.stfle_fac_list, 16);
 	facilities[0] &= 0xff00fff3f47c0000ULL;
-	facilities[1] &= 0x201c000000000000ULL;
+	facilities[1] &= 0x001c000000000000ULL;
 	return 0;
 }
 

[ 008/221] s390/kvm: Fix address space mixup

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Borntraeger <borntraeger@de.ibm.com>

commit ce6a04ac1b759beafc88dbc443ae5da867579eeb upstream.

I was chasing down a bug of random validity intercepts on s390.
(guest prefix page not mapped in the host virtual aspace). Turns out
that the problem was a wrong address space control element. The
cause was quite complex:

During paging activity a DAT protection during SIE caused a program
interrupt. Normally, the sie retry loop tries to catch all
interrupts during and shortly before sie to rerun the setup. The
problem is now that protection causes a suppressing program interrupt,
causing the PSW to point to the instruction AFTER SIE in case of DAT
protection. This confused the logic of the retry loop to not trigger,
instead we jumped directly back to SIE after return from
the program  interrupt. (the protection fault handler itself did
a rewind of the psw). This usually works quite well, but:

If now the protection fault handler has to wait, another program
might be scheduled in. Later on the sie process will be schedules
in again. In that case the content of CR1 (primary address space)
will be wrong because switch_to will put the user space ASCE into CR1
and not the guest ASCE.

In addition the program parameter is also wrong for every protection
fault of a guest, since we dont issue the SPP instruction.

So lets also check for PSW == instruction after SIE in the program
check handler. Instead of expensively checking all program
interruption codes that might be suppressing we assume that a program
interrupt pointing after SIE was always a program interrupt in SIE.
(Otherwise we have a kernel bug anyway).

We also have to compensate the rewinding, since the C-level handlers
will do that. Therefore we need to add a nop with the same length
as SIE before the sie_loop.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
CC: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kernel/entry64.S |   25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -80,14 +80,21 @@ _TIF_EXIT_SIE = (_TIF_SIGPENDING | _TIF_
 #endif
 	.endm
 
-	.macro	HANDLE_SIE_INTERCEPT scratch
+	.macro	HANDLE_SIE_INTERCEPT scratch,pgmcheck
 #if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
 	tmhh	%r8,0x0001		# interrupting from user ?
 	jnz	.+42
 	lgr	\scratch,%r9
 	slg	\scratch,BASED(.Lsie_loop)
 	clg	\scratch,BASED(.Lsie_length)
+	.if	\pgmcheck
+	# Some program interrupts are suppressing (e.g. protection).
+	# We must also check the instruction after SIE in that case.
+	# do_protection_exception will rewind to rewind_pad
+	jh	.+22
+	.else
 	jhe	.+22
+	.endif
 	lg	%r9,BASED(.Lsie_loop)
 	SPP	BASED(.Lhost_id)	# set host id
 #endif
@@ -391,7 +398,7 @@ ENTRY(pgm_check_handler)
 	lg	%r12,__LC_THREAD_INFO
 	larl	%r13,system_call
 	lmg	%r8,%r9,__LC_PGM_OLD_PSW
-	HANDLE_SIE_INTERCEPT %r14
+	HANDLE_SIE_INTERCEPT %r14,1
 	tmhh	%r8,0x0001		# test problem state bit
 	jnz	1f			# -> fault in user space
 	tmhh	%r8,0x4000		# PER bit set in old PSW ?
@@ -467,7 +474,7 @@ ENTRY(io_int_handler)
 	lg	%r12,__LC_THREAD_INFO
 	larl	%r13,system_call
 	lmg	%r8,%r9,__LC_IO_OLD_PSW
-	HANDLE_SIE_INTERCEPT %r14
+	HANDLE_SIE_INTERCEPT %r14,0
 	SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_STACK,STACK_SHIFT
 	tmhh	%r8,0x0001		# interrupting from user?
 	jz	io_skip
@@ -613,7 +620,7 @@ ENTRY(ext_int_handler)
 	lg	%r12,__LC_THREAD_INFO
 	larl	%r13,system_call
 	lmg	%r8,%r9,__LC_EXT_OLD_PSW
-	HANDLE_SIE_INTERCEPT %r14
+	HANDLE_SIE_INTERCEPT %r14,0
 	SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_STACK,STACK_SHIFT
 	tmhh	%r8,0x0001		# interrupting from user ?
 	jz	ext_skip
@@ -661,7 +668,7 @@ ENTRY(mcck_int_handler)
 	lg	%r12,__LC_THREAD_INFO
 	larl	%r13,system_call
 	lmg	%r8,%r9,__LC_MCK_OLD_PSW
-	HANDLE_SIE_INTERCEPT %r14
+	HANDLE_SIE_INTERCEPT %r14,0
 	tm	__LC_MCCK_CODE,0x80	# system damage?
 	jo	mcck_panic		# yes -> rest of mcck code invalid
 	lghi	%r14,__LC_CPU_TIMER_SAVE_AREA
@@ -960,6 +967,13 @@ ENTRY(sie64a)
 	stg	%r3,__SF_EMPTY+8(%r15)		# save guest register save area
 	xc	__SF_EMPTY+16(8,%r15),__SF_EMPTY+16(%r15) # host id == 0
 	lmg	%r0,%r13,0(%r3)			# load guest gprs 0-13
+# some program checks are suppressing. C code (e.g. do_protection_exception)
+# will rewind the PSW by the ILC, which is 4 bytes in case of SIE. Other
+# instructions in the sie_loop should not cause program interrupts. So
+# lets use a nop (47 00 00 00) as a landing pad.
+# See also HANDLE_SIE_INTERCEPT
+rewind_pad:
+	nop	0
 sie_loop:
 	lg	%r14,__LC_THREAD_INFO		# pointer thread_info struct
 	tm	__TI_flags+7(%r14),_TIF_EXIT_SIE
@@ -999,6 +1013,7 @@ sie_fault:
 .Lhost_id:
 	.quad	0
 
+	EX_TABLE(rewind_pad,sie_fault)
 	EX_TABLE(sie_loop,sie_fault)
 #endif
 

[ 009/221] powerpc: Fix CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n build

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Blanchard <anton@samba.org>

commit 11ee7e99f35ecb15f59b21da6a82d96d2cd3fcc8 upstream.

If we build a kernel with CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n,
the kernel fails when we run at a non zero offset. It turns out
we were incorrectly wrapping some of the relocatable kernel code
with CONFIG_CRASH_DUMP.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/head_64.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -422,7 +422,7 @@ _STATIC(__after_prom_start)
 	tovirt(r6,r6)			/* on booke, we already run at PAGE_OFFSET */
 #endif
 
-#ifdef CONFIG_CRASH_DUMP
+#ifdef CONFIG_RELOCATABLE
 /*
  * Check if the kernel has to be running as relocatable kernel based on the
  * variable __run_at_load, if it is set the kernel is treated as relocatable

[ 010/221] powerpc/vdso: Remove redundant locking in update_vsyscall_tz()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shan Hai <shan.hai@windriver.com>

commit ce73ec6db47af84d1466402781ae0872a9e7873c upstream.

The locking in update_vsyscall_tz() is not only unnecessary because the vdso
code copies the data unproteced in __kernel_gettimeofday() but also
introduces a hard to reproduce race condition between update_vsyscall()
and update_vsyscall_tz(), which causes user space process to loop
forever in vdso code.

The following patch removes the locking from update_vsyscall_tz().

Locking is not only unnecessary because the vdso code copies the data
unprotected in __kernel_gettimeofday() but also erroneous because updating
the tb_update_count is not atomic and introduces a hard to reproduce race
condition between update_vsyscall() and update_vsyscall_tz(), which further
causes user space process to loop forever in vdso code.

The below scenario describes the race condition,
x==0	Boot CPU			other CPU
	proc_P: x==0
	    timer interrupt
		update_vsyscall
x==1		    x++;sync		settimeofday
					    update_vsyscall_tz
x==2						x++;sync
x==3		    sync;x++
						sync;x++
	proc_P: x==3 (loops until x becomes even)

Because the ++ operator would be implemented as three instructions and not
atomic on powerpc.

A similar change was made for x86 in commit 6c260d58634
("x86: vdso: Remove bogus locking in update_vsyscall_tz")

Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/time.c |    5 -----
 1 file changed, 5 deletions(-)

--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -774,13 +774,8 @@ void update_vsyscall_old(struct timespec
 
 void update_vsyscall_tz(void)
 {
-	/* Make userspace gettimeofday spin until we're done. */
-	++vdso_data->tb_update_count;
-	smp_mb();
 	vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
 	vdso_data->tz_dsttime = sys_tz.tz_dsttime;
-	smp_mb();
-	++vdso_data->tb_update_count;
 }
 
 static void __init clocksource_init(void)

[ 011/221] powerpc: Add missing NULL terminator to avoid boot panic on PPC40x

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gabor Juhos <juhosg@openwrt.org>

commit e6449c9b2d90c1bd9a5985bf05ddebfd1631cd6b upstream.

The missing NULL terminator can cause a panic on
PPC405 boards during boot:

  Linux/PowerPC load: console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit
  Finalizing device tree... flat tree at 0x6a5160
  bootconsole [udbg0] enabled
  Page fault in user mode with in_atomic() = 1 mm = (null)
  NIP = c0275f50  MSR = fffffffe
  Oops: Weird page fault, sig: 11 [#1]
  PowerPC 40x Platform
  Modules linked in:
  NIP: c0275f50 LR: c0275f60 CTR: c0280000
  REGS: c0275eb0 TRAP: 636f7265   Not tainted  (3.7.1)
  MSR: fffffffe <VEC,VSX,EE,PR,FP,ME,SE,BE,IR,DR,PMM,RI> CR: c06a6190  XER: 00000001
  TASK = c02662a8[0] 'swapper' THREAD: c0274000
  GPR00: c0275ec0 c000c658 c027c4bf 00000000 c0275ee0 c000a0ec c020a1a8 c020a1f0
  GPR08: c020f631 c020f404 c025f078 c025f080 c0275f10
   Call Trace:
   ---[ end trace 31fd0ba7d8756001 ]---

  Kernel panic - not syncing: Attempted to kill the idle task!

The panic happens since commit 9597abe00c1bab2aedce6b49866bf6d1e81c9eed
(sections: fix section conflicts in arch/powerpc), however the root
cause of this is that the NULL terminator were not added in commit
a4f740cf33f7f6c164bbde3c0cdbcc77b0c4997c (of/flattree: Add of_flat_dt_match()
helper function).

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/platforms/40x/ppc40x_simple.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -57,7 +57,8 @@ static const char * const board[] __init
 	"amcc,makalu",
 	"apm,klondike",
 	"est,hotfoot",
-	"plathome,obs600"
+	"plathome,obs600",
+	NULL
 };
 
 static int __init ppc40x_probe(void)

[ 012/221] KVM: PPC: e500: fix allocation size error on g2h_tlb1_map

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Scott Wood <scottwood@freescale.com>

commit e400e72f250d2567e89c9bafb47ab91e8d9a15a2 upstream.

We were only allocating half the bytes we need, which was made more
obvious by a recent fix to the memset in  clear_tlb1_bitmap().

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/e500_tlb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -1332,7 +1332,7 @@ int kvmppc_e500_tlb_init(struct kvmppc_v
 	if (!vcpu_e500->gtlb_priv[1])
 		goto err;
 
-	vcpu_e500->g2h_tlb1_map = kzalloc(sizeof(unsigned int) *
+	vcpu_e500->g2h_tlb1_map = kzalloc(sizeof(u64) *
 					  vcpu_e500->gtlb_params[1].entries,
 					  GFP_KERNEL);
 	if (!vcpu_e500->g2h_tlb1_map)

[ 013/221] KVM: Fix user memslot overlap check

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Williamson <alex.williamson@redhat.com>

commit 5419369ed6bd4cf711fdda5e52a5999b940413f5 upstream.

Prior to memory slot sorting this loop compared all of the user memory
slots for overlap with new entries.  With memory slot sorting, we're
just checking some number of entries in the array that may or may not
be user slots.  Instead, walk all the slots with kvm_for_each_memslot,
which has the added benefit of terminating early when we hit the first
empty slot, and skip comparison to private slots.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 virt/kvm/kvm_main.c |   13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -709,8 +709,7 @@ int __kvm_set_memory_region(struct kvm *
 	int r;
 	gfn_t base_gfn;
 	unsigned long npages;
-	unsigned long i;
-	struct kvm_memory_slot *memslot;
+	struct kvm_memory_slot *memslot, *slot;
 	struct kvm_memory_slot old, new;
 	struct kvm_memslots *slots, *old_memslots;
 
@@ -761,13 +760,11 @@ int __kvm_set_memory_region(struct kvm *
 
 	/* Check for overlaps */
 	r = -EEXIST;
-	for (i = 0; i < KVM_MEMORY_SLOTS; ++i) {
-		struct kvm_memory_slot *s = &kvm->memslots->memslots[i];
-
-		if (s == memslot || !s->npages)
+	kvm_for_each_memslot(slot, kvm->memslots) {
+		if (slot->id >= KVM_MEMORY_SLOTS || slot == memslot)
 			continue;
-		if (!((base_gfn + npages <= s->base_gfn) ||
-		      (base_gfn >= s->base_gfn + s->npages)))
+		if (!((base_gfn + npages <= slot->base_gfn) ||
+		      (base_gfn >= slot->base_gfn + slot->npages)))
 			goto out_free;
 	}
 

[ 014/221] s390/cio: fix pgid reserved check

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Ott <sebott@linux.vnet.ibm.com>

commit d99e79ec5574fc556c988f613ed6175f6de66f4a upstream.

The check to whom a device is reserved is done by checking the path
state of the affected channel paths. If it turns out that one path is
flagged as reserved by someone else the whole device is marked as such.

However the meaning of the RESVD_ELSE bit is that the addressed device
is reserved to a different pathgroup (and not reserved to a different
LPAR). If we do this test on a path which is currently not a member of
the pathgroup we could erroneously mark the device as reserved to
someone else.

To fix this collect the reserved state for all potential members of the
pathgroup and only mark the device as reserved if all of those potential
members have the RESVD_ELSE bit set.

Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/cio/device_pgid.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/s390/cio/device_pgid.c
+++ b/drivers/s390/cio/device_pgid.c
@@ -234,7 +234,7 @@ static int pgid_cmp(struct pgid *p1, str
  * Determine pathgroup state from PGID data.
  */
 static void pgid_analyze(struct ccw_device *cdev, struct pgid **p,
-			 int *mismatch, int *reserved, u8 *reset)
+			 int *mismatch, u8 *reserved, u8 *reset)
 {
 	struct pgid *pgid = &cdev->private->pgid[0];
 	struct pgid *first = NULL;
@@ -248,7 +248,7 @@ static void pgid_analyze(struct ccw_devi
 		if ((cdev->private->pgid_valid_mask & lpm) == 0)
 			continue;
 		if (pgid->inf.ps.state2 == SNID_STATE2_RESVD_ELSE)
-			*reserved = 1;
+			*reserved |= lpm;
 		if (pgid_is_reset(pgid)) {
 			*reset |= lpm;
 			continue;
@@ -316,14 +316,14 @@ static void snid_done(struct ccw_device
 	struct subchannel *sch = to_subchannel(cdev->dev.parent);
 	struct pgid *pgid;
 	int mismatch = 0;
-	int reserved = 0;
+	u8 reserved = 0;
 	u8 reset = 0;
 	u8 donepm;
 
 	if (rc)
 		goto out;
 	pgid_analyze(cdev, &pgid, &mismatch, &reserved, &reset);
-	if (reserved)
+	if (reserved == cdev->private->pgid_valid_mask)
 		rc = -EUSERS;
 	else if (mismatch)
 		rc = -EOPNOTSUPP;
@@ -336,7 +336,7 @@ static void snid_done(struct ccw_device
 	}
 out:
 	CIO_MSG_EVENT(2, "snid: device 0.%x.%04x: rc=%d pvm=%02x vpm=%02x "
-		      "todo=%02x mism=%d rsvd=%d reset=%02x\n", id->ssid,
+		      "todo=%02x mism=%d rsvd=%02x reset=%02x\n", id->ssid,
 		      id->devno, rc, cdev->private->pgid_valid_mask, sch->vpm,
 		      cdev->private->pgid_todo_mask, mismatch, reserved, reset);
 	switch (rc) {

[ 015/221] MIPS: Fix poweroff failure when HOTPLUG_CPU configured.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huacai Chen <chenhc@lemote.com>

commit 8add1ecb81f541ef2fcb0b85a5470ad9ecfb4a84 upstream.

When poweroff machine, kernel_power_off() call disable_nonboot_cpus().
And if we have HOTPLUG_CPU configured, disable_nonboot_cpus() is not an
empty function but attempt to actually disable the nonboot cpus. Since
system state is SYSTEM_POWER_OFF, play_dead() won't be called and thus
disable_nonboot_cpus() hangs. Therefore, we make this patch to avoid
poweroff failure.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Hongliang Tao <taohl@lemote.com>
Signed-off-by: Hua Yan <yanh@lemote.com>
Cc: Yong Zhang <yong.zhang@windriver.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/4211/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/process.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -72,9 +72,7 @@ void __noreturn cpu_idle(void)
 			}
 		}
 #ifdef CONFIG_HOTPLUG_CPU
-		if (!cpu_online(cpu) && !cpu_isset(cpu, cpu_callin_map) &&
-		    (system_state == SYSTEM_RUNNING ||
-		     system_state == SYSTEM_BOOTING))
+		if (!cpu_online(cpu) && !cpu_isset(cpu, cpu_callin_map))
 			play_dead();
 #endif
 		rcu_idle_exit();

[ 016/221] mm: compaction: fix echo 1 > compact_memory return error issue

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Liu <r64343@freescale.com>

commit 7964c06d66c76507d8b6b662bffea770c29ef0ce upstream.

when run the folloing command under shell, it will return error

  sh/$ echo 1 > /proc/sys/vm/compact_memory
  sh/$ sh: write error: Bad address

After strace, I found the following log:

  ...
  write(1, "1\n", 2)               = 3
  write(1, "", 4294967295)         = -1 EFAULT (Bad address)
  write(2, "echo: write error: Bad address\n", 31echo: write error: Bad address
  ) = 31

This tells system return 3(COMPACT_COMPLETE) after write data to
compact_memory.

The fix is to make the system just return 0 instead 3(COMPACT_COMPLETE)
from sysctl_compaction_handler after compaction_nodes finished.

Signed-off-by: Jason Liu <r64343@freescale.com>
Suggested-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/compaction.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -1174,7 +1174,7 @@ static int compact_node(int nid)
 }
 
 /* Compact all nodes in the system */
-static int compact_nodes(void)
+static void compact_nodes(void)
 {
 	int nid;
 
@@ -1183,8 +1183,6 @@ static int compact_nodes(void)
 
 	for_each_online_node(nid)
 		compact_node(nid);
-
-	return COMPACT_COMPLETE;
 }
 
 /* The written value is actually unused, all memory is compacted */
@@ -1195,7 +1193,7 @@ int sysctl_compaction_handler(struct ctl
 			void __user *buffer, size_t *length, loff_t *ppos)
 {
 	if (write)
-		return compact_nodes();
+		compact_nodes();
 
 	return 0;
 }

[ 017/221] mm: use aligned zone start for pfn_to_bitidx calculation

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Laura Abbott <lauraa@codeaurora.org>

commit c060f943d0929f3e429c5d9522290584f6281d6e upstream.

The current calculation in pfn_to_bitidx assumes that (pfn -
zone->zone_start_pfn) >> pageblock_order will return the same bit for
all pfn in a pageblock.  If zone_start_pfn is not aligned to
pageblock_nr_pages, this may not always be correct.

Consider the following with pageblock order = 10, zone start 2MB:

  pfn     | pfn - zone start | (pfn - zone start) >> page block order
  ----------------------------------------------------------------
  0x26000 | 0x25e00	   |  0x97
  0x26100 | 0x25f00	   |  0x97
  0x26200 | 0x26000	   |  0x98
  0x26300 | 0x26100	   |  0x98

This means that calling {get,set}_pageblock_migratetype on a single page
will not set the migratetype for the full block.  Fix this by rounding
down zone_start_pfn when doing the bitidx calculation.

For our use case, the effects of this bug were mostly tied to the fact
that CMA allocations would either take a long time or fail to happen.
Depending on the driver using CMA, this could result in anything from
visual glitches to application failures.

Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/page_alloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5506,7 +5506,7 @@ static inline int pfn_to_bitidx(struct z
 	pfn &= (PAGES_PER_SECTION-1);
 	return (pfn >> pageblock_order) * NR_PAGEBLOCK_BITS;
 #else
-	pfn = pfn - zone->zone_start_pfn;
+	pfn = pfn - round_down(zone->zone_start_pfn, pageblock_nr_pages);
 	return (pfn >> pageblock_order) * NR_PAGEBLOCK_BITS;
 #endif /* CONFIG_SPARSEMEM */
 }

[ 018/221] mm: bootmem: fix free_all_bootmem_core() with odd bitmap alignment

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Max Filippov <jcmvbkbc@gmail.com>

commit 10d73e655cef6e86ea8589dca3df4e495e4900b0 upstream.

Currently free_all_bootmem_core ignores that node_min_pfn may be not
multiple of BITS_PER_LONG.  Eg commit 6dccdcbe2c3e ("mm: bootmem: fix
checking the bitmap when finally freeing bootmem") shifts vec by lower
bits of start instead of lower bits of idx.  Also

  if (IS_ALIGNED(start, BITS_PER_LONG) && vec == ~0UL)

assumes that vec bit 0 corresponds to start pfn, which is only true when
node_min_pfn is a multiple of BITS_PER_LONG.  Also loop in the else
clause can double-free pages (e.g.  with node_min_pfn == start == 1,
map[0] == ~0 on 32-bit machine page 32 will be double-freed).

This bug causes the following message during xtensa kernel boot:

  bootmem::free_all_bootmem_core nid=0 start=1 end=8000
  BUG: Bad page state in process swapper  pfn:00001
  page:d04bd020 count:0 mapcount:-127 mapping:  (null) index:0x2
  page flags: 0x0()
  Call Trace:
    bad_page+0x8c/0x9c
    free_pages_prepare+0x5e/0x88
    free_hot_cold_page+0xc/0xa0
    __free_pages+0x24/0x38
    __free_pages_bootmem+0x54/0x56
    free_all_bootmem_core$part$11+0xeb/0x138
    free_all_bootmem+0x46/0x58
    mem_init+0x25/0xa4
    start_kernel+0x11e/0x25c
    should_never_return+0x0/0x3be7

The fix is the following:
 - always align vec so that its bit 0 corresponds to start
 - provide BITS_PER_LONG bits in vec, if those bits are available in the
   map
 - don't free pages past next start position in the else clause.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Prasad Koya <prasad.koya@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/bootmem.c |   24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -185,10 +185,23 @@ static unsigned long __init free_all_boo
 
 	while (start < end) {
 		unsigned long *map, idx, vec;
+		unsigned shift;
 
 		map = bdata->node_bootmem_map;
 		idx = start - bdata->node_min_pfn;
+		shift = idx & (BITS_PER_LONG - 1);
+		/*
+		 * vec holds at most BITS_PER_LONG map bits,
+		 * bit 0 corresponds to start.
+		 */
 		vec = ~map[idx / BITS_PER_LONG];
+
+		if (shift) {
+			vec >>= shift;
+			if (end - start >= BITS_PER_LONG)
+				vec |= ~map[idx / BITS_PER_LONG + 1] <<
+					(BITS_PER_LONG - shift);
+		}
 		/*
 		 * If we have a properly aligned and fully unreserved
 		 * BITS_PER_LONG block of pages in front of us, free
@@ -201,19 +214,18 @@ static unsigned long __init free_all_boo
 			count += BITS_PER_LONG;
 			start += BITS_PER_LONG;
 		} else {
-			unsigned long off = 0;
+			unsigned long cur = start;
 
-			vec >>= start & (BITS_PER_LONG - 1);
-			while (vec) {
+			start = ALIGN(start + 1, BITS_PER_LONG);
+			while (vec && cur != start) {
 				if (vec & 1) {
-					page = pfn_to_page(start + off);
+					page = pfn_to_page(cur);
 					__free_pages_bootmem(page, 0);
 					count++;
 				}
 				vec >>= 1;
-				off++;
+				++cur;
 			}
-			start = ALIGN(start + 1, BITS_PER_LONG);
 		}
 	}
 

[ 019/221] ath9k_hw: Enable hw PLL power save for AR9462

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>

commit 1680260226a8fd2aab590319da83ad8e610da9bd upstream.

This reduced the power consumption to half in full and network sleep.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Cc: Paul Stewart <pstew@chromium.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/ar9003_hw.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -219,10 +219,10 @@ static void ar9003_hw_init_mode_regs(str
 
 		/* Awake -> Sleep Setting */
 		INIT_INI_ARRAY(&ah->iniPcieSerdes,
-			       ar9462_pciephy_pll_on_clkreq_disable_L1_2p0);
+			       ar9462_pciephy_clkreq_disable_L1_2p0);
 		/* Sleep -> Awake Setting */
 		INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
-			       ar9462_pciephy_pll_on_clkreq_disable_L1_2p0);
+			       ar9462_pciephy_clkreq_disable_L1_2p0);
 
 		/* Fast clock modal settings */
 		INIT_INI_ARRAY(&ah->iniModesFastClock,

[ 020/221] Revert "ath9k_hw: Update AR9003 high_power tx gain table"

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit 9c170e068636deb3e3f96114034bb711675f0faa upstream.

This reverts commit f74b9d365ddd33a375802b064f96a5d0e99af7c0.

Turns out reverting commit a240dc7b3c7463bd60cf0a9b2a90f52f78aae0fd
"ath9k_hw: Updated AR9003 tx gain table for 5GHz" was not enough to
bring the tx power back to normal levels on devices like the
Buffalo WZR-HP-G450H, this one needs to be reverted as well.

This revert improves tx power by ~10 db on that device

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: rmanohar@qca.qualcomm.com
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h |  172 +++++++++----------
 1 file changed, 86 insertions(+), 86 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -534,98 +534,98 @@ static const u32 ar9300_2p2_baseband_cor
 
 static const u32 ar9300Modes_high_power_tx_gain_table_2p2[][5] = {
 	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x0000a2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
-	{0x0000a2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
-	{0x0000a2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
+	{0x0000a2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+	{0x0000a2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+	{0x0000a2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
 	{0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
-	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
-	{0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
-	{0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004},
-	{0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200},
-	{0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202},
-	{0x0000a514, 0x1c000223, 0x1c000223, 0x12000400, 0x12000400},
-	{0x0000a518, 0x21002220, 0x21002220, 0x16000402, 0x16000402},
-	{0x0000a51c, 0x27002223, 0x27002223, 0x19000404, 0x19000404},
-	{0x0000a520, 0x2b022220, 0x2b022220, 0x1c000603, 0x1c000603},
-	{0x0000a524, 0x2f022222, 0x2f022222, 0x21000a02, 0x21000a02},
-	{0x0000a528, 0x34022225, 0x34022225, 0x25000a04, 0x25000a04},
-	{0x0000a52c, 0x3a02222a, 0x3a02222a, 0x28000a20, 0x28000a20},
-	{0x0000a530, 0x3e02222c, 0x3e02222c, 0x2c000e20, 0x2c000e20},
-	{0x0000a534, 0x4202242a, 0x4202242a, 0x30000e22, 0x30000e22},
-	{0x0000a538, 0x4702244a, 0x4702244a, 0x34000e24, 0x34000e24},
-	{0x0000a53c, 0x4b02244c, 0x4b02244c, 0x38001640, 0x38001640},
-	{0x0000a540, 0x4e02246c, 0x4e02246c, 0x3c001660, 0x3c001660},
-	{0x0000a544, 0x52022470, 0x52022470, 0x3f001861, 0x3f001861},
-	{0x0000a548, 0x55022490, 0x55022490, 0x43001a81, 0x43001a81},
-	{0x0000a54c, 0x59022492, 0x59022492, 0x47001a83, 0x47001a83},
-	{0x0000a550, 0x5d022692, 0x5d022692, 0x4a001c84, 0x4a001c84},
-	{0x0000a554, 0x61022892, 0x61022892, 0x4e001ce3, 0x4e001ce3},
-	{0x0000a558, 0x65024890, 0x65024890, 0x52001ce5, 0x52001ce5},
-	{0x0000a55c, 0x69024892, 0x69024892, 0x56001ce9, 0x56001ce9},
-	{0x0000a560, 0x6e024c92, 0x6e024c92, 0x5a001ceb, 0x5a001ceb},
-	{0x0000a564, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
-	{0x0000a568, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
-	{0x0000a56c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
-	{0x0000a570, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
-	{0x0000a574, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
-	{0x0000a578, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
-	{0x0000a57c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
-	{0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000},
-	{0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002},
-	{0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004},
-	{0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200},
-	{0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202},
-	{0x0000a594, 0x1c800223, 0x1c800223, 0x12800400, 0x12800400},
-	{0x0000a598, 0x21802220, 0x21802220, 0x16800402, 0x16800402},
-	{0x0000a59c, 0x27802223, 0x27802223, 0x19800404, 0x19800404},
-	{0x0000a5a0, 0x2b822220, 0x2b822220, 0x1c800603, 0x1c800603},
-	{0x0000a5a4, 0x2f822222, 0x2f822222, 0x21800a02, 0x21800a02},
-	{0x0000a5a8, 0x34822225, 0x34822225, 0x25800a04, 0x25800a04},
-	{0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x28800a20, 0x28800a20},
-	{0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2c800e20, 0x2c800e20},
-	{0x0000a5b4, 0x4282242a, 0x4282242a, 0x30800e22, 0x30800e22},
-	{0x0000a5b8, 0x4782244a, 0x4782244a, 0x34800e24, 0x34800e24},
-	{0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x38801640, 0x38801640},
-	{0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x3c801660, 0x3c801660},
-	{0x0000a5c4, 0x52822470, 0x52822470, 0x3f801861, 0x3f801861},
-	{0x0000a5c8, 0x55822490, 0x55822490, 0x43801a81, 0x43801a81},
-	{0x0000a5cc, 0x59822492, 0x59822492, 0x47801a83, 0x47801a83},
-	{0x0000a5d0, 0x5d822692, 0x5d822692, 0x4a801c84, 0x4a801c84},
-	{0x0000a5d4, 0x61822892, 0x61822892, 0x4e801ce3, 0x4e801ce3},
-	{0x0000a5d8, 0x65824890, 0x65824890, 0x52801ce5, 0x52801ce5},
-	{0x0000a5dc, 0x69824892, 0x69824892, 0x56801ce9, 0x56801ce9},
-	{0x0000a5e0, 0x6e824c92, 0x6e824c92, 0x5a801ceb, 0x5a801ceb},
-	{0x0000a5e4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
-	{0x0000a5e8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
-	{0x0000a5ec, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
-	{0x0000a5f0, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
-	{0x0000a5f4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
-	{0x0000a5f8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
-	{0x0000a5fc, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+	{0x0000a410, 0x000050d8, 0x000050d8, 0x000050d9, 0x000050d9},
+	{0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000},
+	{0x0000a504, 0x04002222, 0x04002222, 0x04000002, 0x04000002},
+	{0x0000a508, 0x09002421, 0x09002421, 0x08000004, 0x08000004},
+	{0x0000a50c, 0x0d002621, 0x0d002621, 0x0b000200, 0x0b000200},
+	{0x0000a510, 0x13004620, 0x13004620, 0x0f000202, 0x0f000202},
+	{0x0000a514, 0x19004a20, 0x19004a20, 0x11000400, 0x11000400},
+	{0x0000a518, 0x1d004e20, 0x1d004e20, 0x15000402, 0x15000402},
+	{0x0000a51c, 0x21005420, 0x21005420, 0x19000404, 0x19000404},
+	{0x0000a520, 0x26005e20, 0x26005e20, 0x1b000603, 0x1b000603},
+	{0x0000a524, 0x2b005e40, 0x2b005e40, 0x1f000a02, 0x1f000a02},
+	{0x0000a528, 0x2f005e42, 0x2f005e42, 0x23000a04, 0x23000a04},
+	{0x0000a52c, 0x33005e44, 0x33005e44, 0x26000a20, 0x26000a20},
+	{0x0000a530, 0x38005e65, 0x38005e65, 0x2a000e20, 0x2a000e20},
+	{0x0000a534, 0x3c005e69, 0x3c005e69, 0x2e000e22, 0x2e000e22},
+	{0x0000a538, 0x40005e6b, 0x40005e6b, 0x31000e24, 0x31000e24},
+	{0x0000a53c, 0x44005e6d, 0x44005e6d, 0x34001640, 0x34001640},
+	{0x0000a540, 0x49005e72, 0x49005e72, 0x38001660, 0x38001660},
+	{0x0000a544, 0x4e005eb2, 0x4e005eb2, 0x3b001861, 0x3b001861},
+	{0x0000a548, 0x53005f12, 0x53005f12, 0x3e001a81, 0x3e001a81},
+	{0x0000a54c, 0x59025eb2, 0x59025eb2, 0x42001a83, 0x42001a83},
+	{0x0000a550, 0x5e025f12, 0x5e025f12, 0x44001c84, 0x44001c84},
+	{0x0000a554, 0x61027f12, 0x61027f12, 0x48001ce3, 0x48001ce3},
+	{0x0000a558, 0x6702bf12, 0x6702bf12, 0x4c001ce5, 0x4c001ce5},
+	{0x0000a55c, 0x6b02bf14, 0x6b02bf14, 0x50001ce9, 0x50001ce9},
+	{0x0000a560, 0x6f02bf16, 0x6f02bf16, 0x54001ceb, 0x54001ceb},
+	{0x0000a564, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+	{0x0000a568, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+	{0x0000a56c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+	{0x0000a570, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+	{0x0000a574, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+	{0x0000a578, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+	{0x0000a57c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
+	{0x0000a580, 0x00802220, 0x00802220, 0x00800000, 0x00800000},
+	{0x0000a584, 0x04802222, 0x04802222, 0x04800002, 0x04800002},
+	{0x0000a588, 0x09802421, 0x09802421, 0x08800004, 0x08800004},
+	{0x0000a58c, 0x0d802621, 0x0d802621, 0x0b800200, 0x0b800200},
+	{0x0000a590, 0x13804620, 0x13804620, 0x0f800202, 0x0f800202},
+	{0x0000a594, 0x19804a20, 0x19804a20, 0x11800400, 0x11800400},
+	{0x0000a598, 0x1d804e20, 0x1d804e20, 0x15800402, 0x15800402},
+	{0x0000a59c, 0x21805420, 0x21805420, 0x19800404, 0x19800404},
+	{0x0000a5a0, 0x26805e20, 0x26805e20, 0x1b800603, 0x1b800603},
+	{0x0000a5a4, 0x2b805e40, 0x2b805e40, 0x1f800a02, 0x1f800a02},
+	{0x0000a5a8, 0x2f805e42, 0x2f805e42, 0x23800a04, 0x23800a04},
+	{0x0000a5ac, 0x33805e44, 0x33805e44, 0x26800a20, 0x26800a20},
+	{0x0000a5b0, 0x38805e65, 0x38805e65, 0x2a800e20, 0x2a800e20},
+	{0x0000a5b4, 0x3c805e69, 0x3c805e69, 0x2e800e22, 0x2e800e22},
+	{0x0000a5b8, 0x40805e6b, 0x40805e6b, 0x31800e24, 0x31800e24},
+	{0x0000a5bc, 0x44805e6d, 0x44805e6d, 0x34801640, 0x34801640},
+	{0x0000a5c0, 0x49805e72, 0x49805e72, 0x38801660, 0x38801660},
+	{0x0000a5c4, 0x4e805eb2, 0x4e805eb2, 0x3b801861, 0x3b801861},
+	{0x0000a5c8, 0x53805f12, 0x53805f12, 0x3e801a81, 0x3e801a81},
+	{0x0000a5cc, 0x59825eb2, 0x59825eb2, 0x42801a83, 0x42801a83},
+	{0x0000a5d0, 0x5e825f12, 0x5e825f12, 0x44801c84, 0x44801c84},
+	{0x0000a5d4, 0x61827f12, 0x61827f12, 0x48801ce3, 0x48801ce3},
+	{0x0000a5d8, 0x6782bf12, 0x6782bf12, 0x4c801ce5, 0x4c801ce5},
+	{0x0000a5dc, 0x6b82bf14, 0x6b82bf14, 0x50801ce9, 0x50801ce9},
+	{0x0000a5e0, 0x6f82bf16, 0x6f82bf16, 0x54801ceb, 0x54801ceb},
+	{0x0000a5e4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+	{0x0000a5e8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+	{0x0000a5ec, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+	{0x0000a5f0, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+	{0x0000a5f4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+	{0x0000a5f8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
+	{0x0000a5fc, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
 	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a614, 0x02004000, 0x02004000, 0x01404000, 0x01404000},
-	{0x0000a618, 0x02004801, 0x02004801, 0x01404501, 0x01404501},
-	{0x0000a61c, 0x02808a02, 0x02808a02, 0x02008501, 0x02008501},
-	{0x0000a620, 0x0380ce03, 0x0380ce03, 0x0280ca03, 0x0280ca03},
-	{0x0000a624, 0x04411104, 0x04411104, 0x03010c04, 0x03010c04},
-	{0x0000a628, 0x04411104, 0x04411104, 0x04014c04, 0x04014c04},
-	{0x0000a62c, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
-	{0x0000a630, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
-	{0x0000a634, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
-	{0x0000a638, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
-	{0x0000a63c, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
-	{0x0000b2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
-	{0x0000b2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
-	{0x0000b2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
+	{0x0000a610, 0x00804000, 0x00804000, 0x00000000, 0x00000000},
+	{0x0000a614, 0x00804201, 0x00804201, 0x01404000, 0x01404000},
+	{0x0000a618, 0x0280c802, 0x0280c802, 0x01404501, 0x01404501},
+	{0x0000a61c, 0x0280ca03, 0x0280ca03, 0x02008501, 0x02008501},
+	{0x0000a620, 0x04c15104, 0x04c15104, 0x0280ca03, 0x0280ca03},
+	{0x0000a624, 0x04c15305, 0x04c15305, 0x03010c04, 0x03010c04},
+	{0x0000a628, 0x04c15305, 0x04c15305, 0x04014c04, 0x04014c04},
+	{0x0000a62c, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000a630, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000a634, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000a638, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000a63c, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
+	{0x0000b2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+	{0x0000b2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+	{0x0000b2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
 	{0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
-	{0x0000c2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
-	{0x0000c2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
-	{0x0000c2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
+	{0x0000c2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
+	{0x0000c2e0, 0x0000f800, 0x0000f800, 0x03ccc584, 0x03ccc584},
+	{0x0000c2e4, 0x03ff0000, 0x03ff0000, 0x03f0f800, 0x03f0f800},
 	{0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
 	{0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
 	{0x00016048, 0x66480001, 0x66480001, 0x66480001, 0x66480001},

[ 021/221] ath9k: ar9003: fix OTP register offsets for AR9340

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gabor Juhos <juhosg@openwrt.org>

commit b3cd8021379306c0be6932e4d3b4b01efc681769 upstream.

Trying to access the OTP memory on the AR9340
causes a data bus error like this:

  Data bus error, epc == 86e84164, ra == 86e84164
  Oops[#1]:
  Cpu 0
  $ 0   : 00000000 00000061 deadc0de 00000000
  $ 4   : b8115f18 00015f18 00000007 00000004
  $ 8   : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c
  $12   : 7c7c3c7c 001f0041 00000000 7c7c7c3c
  $16   : 86ee0000 00015f18 00000000 00000007
  $20   : 00000004 00000064 00000004 86d71c44
  $24   : 00000000 86e6ca00
  $28   : 86d70000 86d71b20 86ece0c0 86e84164
  Hi    : 00000000
  Lo    : 00000064
  epc   : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw]
      Tainted: G           O
  ra    : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw]
  Status: 1100d403    KERNEL EXL IE
  Cause : 4080801c
  PrId  : 0001974c (MIPS 74Kc)
  Modules linked in: ath9k(O+) ath9k_common(O) ath9k_hw(O) ath(O) ar934x_nfc
  mac80211(O) usbcore usb_common scsi_mod nls_base nand nand_ecc nand_ids
  crc_ccitt cfg80211(O) compat(O) arc4 aes_generic crypto_blkcipher cryptomgr
  aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio
  Process insmod (pid: 459, threadinfo=86d70000, task=87942140, tls=779ac440)
  Stack : 802fb500 000200da 804db150 804e0000 87816130 86ee0000 00010000 86d71b88
          86d71bc0 00000004 00000003 86e9fcd0 80305300 0002c0d0 86e74c50 800b4c20
          000003e8 00000001 00000000 86ee0000 000003ff 86e9fd64 80305300 80123938
          fffffffc 00000004 000058bc 00000000 86ea0000 86ee0000 000001ff 878d6000
          99999999 86e9fdc0 86ee0fcc 86e9e664 0000c0d0 86ee0000 0000700000007000
          ...
  Call Trace:
  [<86e84164>] ath9k_hw_wait+0x58/0xb0 [ath9k_hw]
  [<86e9fcd0>] ath9k_hw_setup_statusring+0x16b8/0x1c7c [ath9k_hw]

  Code: 0000a812  0040f809  00000000 <00531024> 1054000b  24020001  0c05b5dc  2404000a  26520001

The cause of the error is that the OTP register
offsets are different on the AR9340 than the
actually used values.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.h |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
@@ -68,13 +68,13 @@
 #define AR9300_BASE_ADDR 0x3ff
 #define AR9300_BASE_ADDR_512 0x1ff
 
-#define AR9300_OTP_BASE			0x14000
-#define AR9300_OTP_STATUS		0x15f18
+#define AR9300_OTP_BASE			(AR_SREV_9340(ah) ? 0x30000 : 0x14000)
+#define AR9300_OTP_STATUS		(AR_SREV_9340(ah) ? 0x30018 : 0x15f18)
 #define AR9300_OTP_STATUS_TYPE		0x7
 #define AR9300_OTP_STATUS_VALID		0x4
 #define AR9300_OTP_STATUS_ACCESS_BUSY	0x2
 #define AR9300_OTP_STATUS_SM_BUSY	0x1
-#define AR9300_OTP_READ_DATA		0x15f1c
+#define AR9300_OTP_READ_DATA		(AR_SREV_9340(ah) ? 0x3001c : 0x15f1c)
 
 enum targetPowerHTRates {
 	HT_TARGET_RATE_0_8_16,

[ 022/221] ath9k_hw: Fix signal strength / channel noise reporting

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit b7c0c238898d200e80487516e2b67aba2a522cc0 upstream.

While AR_PHY_CCA_NOM_VAL_* does contain the expected internal noise floor
for a chip measured in clean air, it refers to the lowest expected reading.

Depending on the frequency, this measurement can vary by about 6db, thus
causing a higher reported channel noise and signal strength.

Factor in the 6db offset when converting internal noisefloor to channel noise.

This patch makes the reported values more accurate for all chips without
affecting NF calibration behavior.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/calib.c |    1 +
 drivers/net/wireless/ath/ath9k/calib.h |    3 +++
 2 files changed, 4 insertions(+)

--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -69,6 +69,7 @@ s16 ath9k_hw_getchan_noise(struct ath_hw
 
 	if (chan && chan->noisefloor) {
 		s8 delta = chan->noisefloor -
+			   ATH9K_NF_CAL_NOISE_THRESH -
 			   ath9k_hw_get_default_nf(ah, chan);
 		if (delta > 0)
 			noise += delta;
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -21,6 +21,9 @@
 
 #define AR_PHY_CCA_FILTERWINDOW_LENGTH          5
 
+/* Internal noise floor can vary by about 6db depending on the frequency */
+#define ATH9K_NF_CAL_NOISE_THRESH		6
+
 #define NUM_NF_READINGS       6
 #define ATH9K_NF_CAL_HIST_MAX 5
 

[ 023/221] ath9k_hw: Fix RX gain initvals for AR9485

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

commit a796a1dd5da9645ad77aa687d1a890ecd63ab5a6 upstream.

Populate iniModesRxGain with the correct initvals
array for AR9485 v1.1

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/ar9003_hw.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -540,7 +540,7 @@ static void ar9003_rx_gain_table_mode0(s
 				ar9340Common_rx_gain_table_1p0);
 	else if (AR_SREV_9485_11(ah))
 		INIT_INI_ARRAY(&ah->iniModesRxGain,
-				ar9485Common_wo_xlna_rx_gain_1_1);
+			       ar9485_common_rx_gain_1_1);
 	else if (AR_SREV_9550(ah)) {
 		INIT_INI_ARRAY(&ah->iniModesRxGain,
 				ar955x_1p0_common_rx_gain_table);

[ 024/221] mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislaw Gruszka <sgruszka@redhat.com>

commit 5b632fe85ec82e5c43740b52e74c66df50a37db3 upstream.

Commit f0425beda4d404a6e751439b562100b902ba9c98 "mac80211: retry sending
failed BAR frames later instead of tearing down aggr" caused regression
on rt2x00 hardware (connection hangs). This regression was fixed by
commit be03d4a45c09ee5100d3aaaedd087f19bc20d01 "rt2x00: Don't let
mac80211 send a BAR when an AMPDU subframe fails". But the latter
commit caused yet another problem reported in
https://bugzilla.kernel.org/show_bug.cgi?id=42828#c22

After long discussion in this thread:
http://mid.gmane.org/20121018075615.GA18212@redhat.com
and testing various alternative solutions, which failed on one or other
setup, we have no other good fix for the issues like just revert both
mentioned earlier commits.

To do not affect other hardware which benefit from commit
f0425beda4d404a6e751439b562100b902ba9c98, instead of reverting it,
introduce flag that when used will restore mac80211 behaviour before
the commit.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
[replaced link with mid.gmane.org that has message-id]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/net/mac80211.h |    5 +++++
 net/mac80211/status.c  |    6 +++++-
 2 files changed, 10 insertions(+), 1 deletion(-)

--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1253,6 +1253,10 @@ struct ieee80211_tx_control {
  * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any
  *	P2P Interface. This will be honoured even if more than one interface
  *	is supported.
+ *
+ * @IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL: On this hardware TX BA session
+ *	should be tear down once BAR frame will not be acked.
+ *
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
@@ -1281,6 +1285,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_TX_AMPDU_SETUP_IN_HW		= 1<<23,
 	IEEE80211_HW_SCAN_WHILE_IDLE			= 1<<24,
 	IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF		= 1<<25,
+	IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL		= 1<<26,
 };
 
 /**
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -432,7 +432,11 @@ void ieee80211_tx_status(struct ieee8021
 				       IEEE80211_BAR_CTRL_TID_INFO_MASK) >>
 				      IEEE80211_BAR_CTRL_TID_INFO_SHIFT;
 
-				ieee80211_set_bar_pending(sta, tid, ssn);
+				if (local->hw.flags &
+				    IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL)
+					ieee80211_stop_tx_ba_session(&sta->sta, tid);
+				else
+					ieee80211_set_bar_pending(sta, tid, ssn);
 			}
 		}
 

[ 025/221] carl9170: fix -EINVAL bailout during init with !CONFIG_MAC80211_MESH

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Lamparter <chunkeey@googlemail.com>

commit 6c653f66772c39c5e25db715bbd4730596fccd9e upstream.

Sean reported that as of 3.7, his AR9170 device no longer works
because the driver fails during initialization. He noted this
is due to:
"In carl9170/fw.c, ar->hw->wiphy is tagged with
NL80211_IFTYPE_MESH_POINT support if the firmware has Content
after Beacon Queuing. This is both in interface_modes and the
only iface_combinations entry.

If CONFIG_MAC80211_MESH is not set, ieee80211_register_hw
removes NL80211_IFTYPE_MESH_POINT from interface_modes, but
not iface_combinations.

wiphy_register then checks to see if every interface type in
every interface combination is in interface_modes.
NL80211_IFTYPE_MESH_POINT was removed, so you get a WARN_ON
warning and it returns -EINVAL, giving up."

Unfortunately, the iface_combination (types) feature bitmap
in ieee80211_iface_limit is part of a const member in the
ieee80211_iface_combination struct. Hence, the MESH_POINT
feature flag can't be masked by wiphy_register in the
same way as interface_modes in ieee80211_register_hw.

Reported-by: Sean Patrick Santos <quantheory@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Tested-by: Sean Patrick Santos <quantheory@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/carl9170/fw.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/carl9170/fw.c
+++ b/drivers/net/wireless/ath/carl9170/fw.c
@@ -341,8 +341,12 @@ static int carl9170_fw(struct ar9170 *ar
 		if (SUPP(CARL9170FW_WLANTX_CAB)) {
 			if_comb_types |=
 				BIT(NL80211_IFTYPE_AP) |
-				BIT(NL80211_IFTYPE_MESH_POINT) |
 				BIT(NL80211_IFTYPE_P2P_GO);
+
+#ifdef CONFIG_MAC80211_MESH
+			if_comb_types |=
+				BIT(NL80211_IFTYPE_MESH_POINT);
+#endif /* CONFIG_MAC80211_MESH */
 		}
 	}
 

[ 026/221] firewire: net: Fix handling of fragmented multicast/broadcast packets.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephan Gatzka <stephan.gatzka@gmail.com>

commit 9d2373420900a39f5212a3b289331aa3535b1000 upstream.

This patch fixes both the transmit and receive portion of sending
fragmented mutlicast and broadcast packets.

The transmit section was broken because the offset for INTFRAG and
LASTFRAG packets were just miscalculated by IEEE1394_GASP_HDR_SIZE (which
was reserved with skb_push() in fwnet_send_packet).

The receive section was broken because in fwnet_incoming_packet is a call
to fwnet_peer_find_by_node_id(). Called with generation == -1 it will
not find a peer and the partial datagrams are associated to a peer.

[Stefan R:  The fix to use context->card->generation is not perfect.
It relies on the IR tasklet which processes packets from the prior bus
generation to run before the self-ID-complete worklet which sets the
current card generation.  Alas, there is no simple way of a race-free
implementation.  Let's do it this way for now.]

Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firewire/net.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -861,8 +861,8 @@ static void fwnet_receive_broadcast(stru
 	if (specifier_id == IANA_SPECIFIER_ID && ver == RFC2734_SW_VERSION) {
 		buf_ptr += 2;
 		length -= IEEE1394_GASP_HDR_SIZE;
-		fwnet_incoming_packet(dev, buf_ptr, length,
-				      source_node_id, -1, true);
+		fwnet_incoming_packet(dev, buf_ptr, length, source_node_id,
+				      context->card->generation, true);
 	}
 
 	packet.payload_length = dev->rcv_buffer_size;
@@ -958,7 +958,12 @@ static void fwnet_transmit_packet_done(s
 			break;
 		}
 
-		skb_pull(skb, ptask->max_payload);
+		if (ptask->dest_node == IEEE1394_ALL_NODES) {
+			skb_pull(skb,
+				 ptask->max_payload + IEEE1394_GASP_HDR_SIZE);
+		} else {
+			skb_pull(skb, ptask->max_payload);
+		}
 		if (ptask->outstanding_pkts > 1) {
 			fwnet_make_sf_hdr(&ptask->hdr, RFC2374_HDR_INTFRAG,
 					  dg_size, fg_off, datagram_label);
@@ -1062,7 +1067,7 @@ static int fwnet_send_packet(struct fwne
 		smp_rmb();
 		node_id = dev->card->node_id;
 
-		p = skb_push(ptask->skb, 8);
+		p = skb_push(ptask->skb, IEEE1394_GASP_HDR_SIZE);
 		put_unaligned_be32(node_id << 16 | IANA_SPECIFIER_ID >> 8, p);
 		put_unaligned_be32((IANA_SPECIFIER_ID & 0xff) << 24
 						| RFC2734_SW_VERSION, &p[4]);

[ 027/221] watchdog: Fix disable/enable regression

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit 3935e89505a1c3ab3f3b0c7ef0eae54124f48905 upstream.

Commit 8d4516904b39 ("watchdog: Fix CPU hotplug regression") causes an
oops or hard lockup when doing

 echo 0 > /proc/sys/kernel/nmi_watchdog
 echo 1 > /proc/sys/kernel/nmi_watchdog

and the kernel is booted with nmi_watchdog=1 (default)

Running laptop-mode-tools and disconnecting/connecting AC power will
cause this to trigger, making it a common failure scenario on laptops.

Instead of bailing out of watchdog_disable() when !watchdog_enabled we
can initialize the hrtimer regardless of watchdog_enabled status.  This
makes it safe to call watchdog_disable() in the nmi_watchdog=0 case,
without the negative effect on the enabled => disabled => enabled case.

All these tests pass with this patch:
- nmi_watchdog=1
  echo 0 > /proc/sys/kernel/nmi_watchdog
  echo 1 > /proc/sys/kernel/nmi_watchdog

- nmi_watchdog=0
  echo 0 > /sys/devices/system/cpu/cpu1/online

- nmi_watchdog=0
  echo mem > /sys/power/state

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51661

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: Norbert Warmuth <nwarmuth@t-online.de>
Cc: Joseph Salisbury <joseph.salisbury@canonical.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/watchdog.c |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -343,6 +343,10 @@ static void watchdog_enable(unsigned int
 {
 	struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
 
+	/* kick off the timer for the hardlockup detector */
+	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	hrtimer->function = watchdog_timer_fn;
+
 	if (!watchdog_enabled) {
 		kthread_park(current);
 		return;
@@ -351,10 +355,6 @@ static void watchdog_enable(unsigned int
 	/* Enable the perf event */
 	watchdog_nmi_enable(cpu);
 
-	/* kick off the timer for the hardlockup detector */
-	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	hrtimer->function = watchdog_timer_fn;
-
 	/* done here because hrtimer_start can only pin to smp_processor_id() */
 	hrtimer_start(hrtimer, ns_to_ktime(get_sample_period()),
 		      HRTIMER_MODE_REL_PINNED);
@@ -368,9 +368,6 @@ static void watchdog_disable(unsigned in
 {
 	struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
 
-	if (!watchdog_enabled)
-		return;
-
 	watchdog_set_prio(SCHED_NORMAL, 0);
 	hrtimer_cancel(hrtimer);
 	/* disable the perf event */

[ 028/221] ASoC: wm8994: Use the same DCS codes for all WM1811 variants

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit 72222be39afbd39c16eb180646b0ac44bb1ba460 upstream.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/wm8994.c |   16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -3839,20 +3839,8 @@ static int wm8994_codec_probe(struct snd
 		wm8994->hubs.no_cache_dac_hp_direct = true;
 		wm8994->fll_byp = true;
 
-		switch (control->cust_id) {
-		case 0:
-		case 2:
-			wm8994->hubs.dcs_codes_l = -9;
-			wm8994->hubs.dcs_codes_r = -7;
-			break;
-		case 1:
-		case 3:
-			wm8994->hubs.dcs_codes_l = -8;
-			wm8994->hubs.dcs_codes_r = -7;
-			break;
-		default:
-			break;
-		}
+		wm8994->hubs.dcs_codes_l = -9;
+		wm8994->hubs.dcs_codes_r = -7;
 
 		snd_soc_update_bits(codec, WM8994_ANALOGUE_HP_1,
 				    WM1811_HPOUT1_ATTN, WM1811_HPOUT1_ATTN);

[ 029/221] ASoC: sigmadsp: Fix endianness conversion issue

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lars-Peter Clausen <lars@metafoo.de>

commit a3adb1432d7a3ad86bb17a1638e44414537e4118 upstream.

The 'addr' field of the sigma_action struct is stored as big endian in the
firmware file.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/sigmadsp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/codecs/sigmadsp.c
+++ b/sound/soc/codecs/sigmadsp.c
@@ -225,7 +225,7 @@ EXPORT_SYMBOL(process_sigma_firmware);
 static int sigma_action_write_regmap(void *control_data,
 	const struct sigma_action *sa, size_t len)
 {
-	return regmap_raw_write(control_data, le16_to_cpu(sa->addr),
+	return regmap_raw_write(control_data, be16_to_cpu(sa->addr),
 		sa->payload, len - 2);
 }
 

[ 030/221] regulator: s2mps11: Fix ramp delay value shift operation

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sangbeom Kim <sbkim73@samsung.com>

commit f7ebaaeb0b4b97b20c1816f11884e7bfe610a2fa upstream.

This patch fix the abnormal ramp delay setting.
The shift operation was wrong.

Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/s2mps11.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -269,16 +269,16 @@ static __devinit int s2mps11_pmic_probe(
 
 	if (ramp_enable) {
 		if (s2mps11->buck2_ramp)
-			ramp_reg |= get_ramp_delay(s2mps11->ramp_delay2) >> 6;
+			ramp_reg |= get_ramp_delay(s2mps11->ramp_delay2) << 6;
 		if (s2mps11->buck3_ramp || s2mps11->buck4_ramp)
-			ramp_reg |= get_ramp_delay(s2mps11->ramp_delay34) >> 4;
+			ramp_reg |= get_ramp_delay(s2mps11->ramp_delay34) << 4;
 		sec_reg_write(iodev, S2MPS11_REG_RAMP, ramp_reg | ramp_enable);
 	}
 
 	ramp_reg &= 0x00;
-	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay5) >> 6;
-	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay16) >> 4;
-	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay7810) >> 2;
+	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay5) << 6;
+	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay16) << 4;
+	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay7810) << 2;
 	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay9);
 	sec_reg_write(iodev, S2MPS11_REG_RAMP_BUCK, ramp_reg);
 

[ 031/221] SCSI: mvsas: fix undefined bit shift

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xi Wang <xi.wang@gmail.com>

commit beecadea1b8d67f591b13f7099559f32f3fd601d upstream.

The macro bit(n) is defined as ((u32)1 << n), and thus it doesn't work
with n >= 32, such as in mvs_94xx_assign_reg_set():

	if (i >= 32) {
		mvi->sata_reg_set |= bit(i);
		...
	}

The shift ((u32)1 << n) with n >= 32 also leads to undefined behavior.
The result varies depending on the architecture.

This patch changes bit(n) to do a 64-bit shift.  It also simplifies
mv_ffc64() using __ffs64(), since invoking ffz() with ~0 is undefined.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/mvsas/mv_94xx.h |   14 ++------------
 drivers/scsi/mvsas/mv_sas.h  |    2 +-
 2 files changed, 3 insertions(+), 13 deletions(-)

--- a/drivers/scsi/mvsas/mv_94xx.h
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -258,21 +258,11 @@ enum sas_sata_phy_regs {
 #define SPI_ADDR_VLD_94XX         	(1U << 1)
 #define SPI_CTRL_SpiStart_94XX     	(1U << 0)
 
-#define mv_ffc(x)   ffz(x)
-
 static inline int
 mv_ffc64(u64 v)
 {
-	int i;
-	i = mv_ffc((u32)v);
-	if (i >= 0)
-		return i;
-	i = mv_ffc((u32)(v>>32));
-
-	if (i != 0)
-		return 32 + i;
-
-	return -1;
+	u64 x = ~v;
+	return x ? __ffs64(x) : -1;
 }
 
 #define r_reg_set_enable(i) \
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -69,7 +69,7 @@ extern struct kmem_cache *mvs_task_list_
 #define DEV_IS_EXPANDER(type)	\
 	((type == EDGE_DEV) || (type == FANOUT_DEV))
 
-#define bit(n) ((u32)1 << n)
+#define bit(n) ((u64)1 << n)
 
 #define for_each_phy(__lseq_mask, __mc, __lseq)			\
 	for ((__mc) = (__lseq_mask), (__lseq) = 0;		\

[ 032/221] SCSI: prevent stack buffer overflow in host_reset

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sasha Levin <sasha.levin@oracle.com>

commit 072f19b4bea31cdd482d79f805413f2f9ac9e233 upstream.

store_host_reset() has tried to re-invent the wheel to compare sysfs strings.
Unfortunately it did so poorly and never bothered to check the input from
userspace before overwriting stack with it, so something simple as:

echo "WoopsieWoopsie" >
/sys/devices/pseudo_0/adapter0/host0/scsi_host/host0/host_reset

would result in:

[  316.310101] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81f5bac7
[  316.310101]
[  316.320051] Pid: 6655, comm: sh Tainted: G        W    3.7.0-rc5-next-20121114-sasha-00016-g5c9d68d-dirty #129
[  316.320051] Call Trace:
[  316.340058] pps pps0: PPS event at 1352918752.620355751
[  316.340062] pps pps0: capture assert seq #303
[  316.320051]  [<ffffffff83b3856b>] panic+0xcd/0x1f4
[  316.320051]  [<ffffffff81f5bac7>] ? store_host_reset+0xd7/0x100
[  316.320051]  [<ffffffff8110b996>] __stack_chk_fail+0x16/0x20
[  316.320051]  [<ffffffff81f5bac7>] store_host_reset+0xd7/0x100
[  316.320051]  [<ffffffff81e55bb3>] dev_attr_store+0x13/0x30
[  316.320051]  [<ffffffff812f7db1>] sysfs_write_file+0x101/0x170
[  316.320051]  [<ffffffff8127acc8>] vfs_write+0xb8/0x180
[  316.320051]  [<ffffffff8127ae80>] sys_write+0x50/0xa0
[  316.320051]  [<ffffffff83c03418>] tracesys+0xe1/0xe6

Fix this by uninventing whatever was going on there and just use sysfs_streq.

Bug introduced by 29443691 ("[SCSI] scsi: Added support for adapter and
firmware reset").

[jejb: added necessary const to prevent compile warnings]
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/scsi_sysfs.c |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -247,11 +247,11 @@ show_shost_active_mode(struct device *de
 
 static DEVICE_ATTR(active_mode, S_IRUGO | S_IWUSR, show_shost_active_mode, NULL);
 
-static int check_reset_type(char *str)
+static int check_reset_type(const char *str)
 {
-	if (strncmp(str, "adapter", 10) == 0)
+	if (sysfs_streq(str, "adapter"))
 		return SCSI_ADAPTER_RESET;
-	else if (strncmp(str, "firmware", 10) == 0)
+	else if (sysfs_streq(str, "firmware"))
 		return SCSI_FIRMWARE_RESET;
 	else
 		return 0;
@@ -264,12 +264,9 @@ store_host_reset(struct device *dev, str
 	struct Scsi_Host *shost = class_to_shost(dev);
 	struct scsi_host_template *sht = shost->hostt;
 	int ret = -EINVAL;
-	char str[10];
 	int type;
 
-	sscanf(buf, "%s", str);
-	type = check_reset_type(str);
-
+	type = check_reset_type(buf);
 	if (!type)
 		goto exit_store_host_reset;
 

[ 033/221] SCSI: qla2xxx: Properly set result field of bsg_job reply structure for success and failure.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Armen Baloyan <armen.baloyan@qlogic.com>

commit 63ea923a97cb0d78efcbbd229950e101588f0ddb upstream.

FC transport on receiving bsg_job submission failure, calls bsg_job->job_done()
and sets the bsg_job->reply->result the returned value. In contrast, when the
success code (0) is returned fc transport doesn't call bsg_job->job_done() and
doesn't populate bsg_job->reply->result.

Signed-off-by: Steve Hodgson <steve@purestorage.com>
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/qla2xxx/qla_bsg.c |   65 +++++++++++++++--------------------------
 1 file changed, 24 insertions(+), 41 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -219,7 +219,8 @@ qla24xx_proc_fcp_prio_cfg_cmd(struct fc_
 		break;
 	}
 exit_fcp_prio_cfg:
-	bsg_job->job_done(bsg_job);
+	if (!ret)
+		bsg_job->job_done(bsg_job);
 	return ret;
 }
 
@@ -741,7 +742,6 @@ qla2x00_process_loopback(struct fc_bsg_j
 			if (qla81xx_get_port_config(vha, config)) {
 				ql_log(ql_log_warn, vha, 0x701f,
 				    "Get port config failed.\n");
-				bsg_job->reply->result = (DID_ERROR << 16);
 				rval = -EPERM;
 				goto done_free_dma_req;
 			}
@@ -761,7 +761,6 @@ qla2x00_process_loopback(struct fc_bsg_j
 				    new_config, elreq.options);
 
 			if (rval) {
-				bsg_job->reply->result = (DID_ERROR << 16);
 				rval = -EPERM;
 				goto done_free_dma_req;
 			}
@@ -795,7 +794,6 @@ qla2x00_process_loopback(struct fc_bsg_j
 					    "MPI reset failed.\n");
 				}
 
-				bsg_job->reply->result = (DID_ERROR << 16);
 				rval = -EIO;
 				goto done_free_dma_req;
 			}
@@ -812,33 +810,25 @@ qla2x00_process_loopback(struct fc_bsg_j
 		ql_log(ql_log_warn, vha, 0x702c,
 		    "Vendor request %s failed.\n", type);
 
-		fw_sts_ptr = ((uint8_t *)bsg_job->req->sense) +
-		    sizeof(struct fc_bsg_reply);
-
-		memcpy(fw_sts_ptr, response, sizeof(response));
-		fw_sts_ptr += sizeof(response);
-		*fw_sts_ptr = command_sent;
 		rval = 0;
 		bsg_job->reply->result = (DID_ERROR << 16);
+		bsg_job->reply->reply_payload_rcv_len = 0;
 	} else {
 		ql_dbg(ql_dbg_user, vha, 0x702d,
 		    "Vendor request %s completed.\n", type);
-
-		bsg_job->reply_len = sizeof(struct fc_bsg_reply) +
-			sizeof(response) + sizeof(uint8_t);
-		bsg_job->reply->reply_payload_rcv_len =
-			bsg_job->reply_payload.payload_len;
-		fw_sts_ptr = ((uint8_t *)bsg_job->req->sense) +
-			sizeof(struct fc_bsg_reply);
-		memcpy(fw_sts_ptr, response, sizeof(response));
-		fw_sts_ptr += sizeof(response);
-		*fw_sts_ptr = command_sent;
-		bsg_job->reply->result = DID_OK;
+		bsg_job->reply->result = (DID_OK << 16);
 		sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
 			bsg_job->reply_payload.sg_cnt, rsp_data,
 			rsp_data_len);
 	}
-	bsg_job->job_done(bsg_job);
+
+	bsg_job->reply_len = sizeof(struct fc_bsg_reply) +
+	    sizeof(response) + sizeof(uint8_t);
+	fw_sts_ptr = ((uint8_t *)bsg_job->req->sense) +
+	    sizeof(struct fc_bsg_reply);
+	memcpy(fw_sts_ptr, response, sizeof(response));
+	fw_sts_ptr += sizeof(response);
+	*fw_sts_ptr = command_sent;
 
 	dma_free_coherent(&ha->pdev->dev, rsp_data_len,
 		rsp_data, rsp_data_dma);
@@ -853,6 +843,8 @@ done_unmap_req_sg:
 	dma_unmap_sg(&ha->pdev->dev,
 	    bsg_job->request_payload.sg_list,
 	    bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
+	if (!rval)
+		bsg_job->job_done(bsg_job);
 	return rval;
 }
 
@@ -877,16 +869,15 @@ qla84xx_reset(struct fc_bsg_job *bsg_job
 	if (rval) {
 		ql_log(ql_log_warn, vha, 0x7030,
 		    "Vendor request 84xx reset failed.\n");
-		rval = 0;
-		bsg_job->reply->result = (DID_ERROR << 16);
+		rval = (DID_ERROR << 16);
 
 	} else {
 		ql_dbg(ql_dbg_user, vha, 0x7031,
 		    "Vendor request 84xx reset completed.\n");
 		bsg_job->reply->result = DID_OK;
+		bsg_job->job_done(bsg_job);
 	}
 
-	bsg_job->job_done(bsg_job);
 	return rval;
 }
 
@@ -976,8 +967,7 @@ qla84xx_updatefw(struct fc_bsg_job *bsg_
 		ql_log(ql_log_warn, vha, 0x7037,
 		    "Vendor request 84xx updatefw failed.\n");
 
-		rval = 0;
-		bsg_job->reply->result = (DID_ERROR << 16);
+		rval = (DID_ERROR << 16);
 	} else {
 		ql_dbg(ql_dbg_user, vha, 0x7038,
 		    "Vendor request 84xx updatefw completed.\n");
@@ -986,7 +976,6 @@ qla84xx_updatefw(struct fc_bsg_job *bsg_
 		bsg_job->reply->result = DID_OK;
 	}
 
-	bsg_job->job_done(bsg_job);
 	dma_pool_free(ha->s_dma_pool, mn, mn_dma);
 
 done_free_fw_buf:
@@ -996,6 +985,8 @@ done_unmap_sg:
 	dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list,
 		bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
 
+	if (!rval)
+		bsg_job->job_done(bsg_job);
 	return rval;
 }
 
@@ -1163,8 +1154,7 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_
 		ql_log(ql_log_warn, vha, 0x7043,
 		    "Vendor request 84xx mgmt failed.\n");
 
-		rval = 0;
-		bsg_job->reply->result = (DID_ERROR << 16);
+		rval = (DID_ERROR << 16);
 
 	} else {
 		ql_dbg(ql_dbg_user, vha, 0x7044,
@@ -1184,8 +1174,6 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_
 		}
 	}
 
-	bsg_job->job_done(bsg_job);
-
 done_unmap_sg:
 	if (mgmt_b)
 		dma_free_coherent(&ha->pdev->dev, data_len, mgmt_b, mgmt_dma);
@@ -1200,6 +1188,8 @@ done_unmap_sg:
 exit_mgmt:
 	dma_pool_free(ha->s_dma_pool, mn, mn_dma);
 
+	if (!rval)
+		bsg_job->job_done(bsg_job);
 	return rval;
 }
 
@@ -1276,9 +1266,7 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job
 		    fcport->port_name[3], fcport->port_name[4],
 		    fcport->port_name[5], fcport->port_name[6],
 		    fcport->port_name[7], rval, fcport->fp_speed, mb[0], mb[1]);
-		rval = 0;
-		bsg_job->reply->result = (DID_ERROR << 16);
-
+		rval = (DID_ERROR << 16);
 	} else {
 		if (!port_param->mode) {
 			bsg_job->reply_len = sizeof(struct fc_bsg_reply) +
@@ -1292,9 +1280,9 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job
 		}
 
 		bsg_job->reply->result = DID_OK;
+		bsg_job->job_done(bsg_job);
 	}
 
-	bsg_job->job_done(bsg_job);
 	return rval;
 }
 
@@ -1887,8 +1875,6 @@ qla2x00_process_vendor_specific(struct f
 		return qla24xx_process_bidir_cmd(bsg_job);
 
 	default:
-		bsg_job->reply->result = (DID_ERROR << 16);
-		bsg_job->job_done(bsg_job);
 		return -ENOSYS;
 	}
 }
@@ -1919,8 +1905,6 @@ qla24xx_bsg_request(struct fc_bsg_job *b
 		ql_dbg(ql_dbg_user, vha, 0x709f,
 		    "BSG: ISP abort active/needed -- cmd=%d.\n",
 		    bsg_job->request->msgcode);
-		bsg_job->reply->result = (DID_ERROR << 16);
-		bsg_job->job_done(bsg_job);
 		return -EBUSY;
 	}
 
@@ -1943,7 +1927,6 @@ qla24xx_bsg_request(struct fc_bsg_job *b
 	case FC_BSG_RPT_CT:
 	default:
 		ql_log(ql_log_warn, vha, 0x705a, "Unsupported BSG request.\n");
-		bsg_job->reply->result = ret;
 		break;
 	}
 	return ret;

[ 034/221] SCSI: qla2xxx: Test and clear FCPORT_UPDATE_NEEDED atomically.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Jeffery <djeffery@redhat.com>

commit a394aac88506159e047630fc90dc2242568382d8 upstream.

When the qla2xxx driver loses access to multiple, remote ports, there is a race
condition which can occur which will keep the request stuck on a scsi request
queue indefinitely.

This bad state occurred do to a race condition with how the FCPORT_UPDATE_NEEDED
bit is set in qla2x00_schedule_rport_del(), and how it is cleared in
qla2x00_do_dpc().  The problem port has its drport pointer set, but it has never
been processed by the driver to inform the fc transport that the port has been
lost.  qla2x00_schedule_rport_del() sets drport, and then sets the
FCPORT_UPDATE_NEEDED bit.  In qla2x00_do_dpc(), the port lists are walked and
any drport pointer is handled and the fc transport informed of the port loss,
then the FCPORT_UPDATE_NEEDED bit is cleared.  This leaves a race where the
dpc thread is processing one port removal, another port removal is marked
with a call to qla2x00_schedule_rport_del(), and the dpc thread clears the
bit for both removals, even though only the first removal was actually
handled.  Until another event occurs to set FCPORT_UPDATE_NEEDED, the later
port removal is never finished and qla2xxx stays in a bad state which causes
requests to become stuck on request queues.

This patch updates the driver to test and clear FCPORT_UPDATE_NEEDED
atomically.  This ensures the port state changes are processed and not lost.

Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/qla2xxx/qla_os.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -4505,9 +4505,9 @@ qla2x00_do_dpc(void *data)
 			    "ISP abort end.\n");
 		}
 
-		if (test_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags)) {
+		if (test_and_clear_bit(FCPORT_UPDATE_NEEDED,
+		    &base_vha->dpc_flags)) {
 			qla2x00_update_fcports(base_vha);
-			clear_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags);
 		}
 
 		if (test_bit(SCR_PENDING, &base_vha->dpc_flags)) {

[ 035/221] SCSI: qla2xxx: Change in setting UNLOADING flag and FC vports logout sequence while unloading qla2xxx driver.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Giridhar Malavali <giridhar.malavali@qlogic.com>

commit 220d36b4c2d96446e88d561714829ec5801b4fc7 upstream.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/qla2xxx/qla_attr.c |    3 +--
 drivers/scsi/qla2xxx/qla_os.c   |    3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1615,8 +1615,7 @@ qla2x00_terminate_rport_io(struct fc_rpo
 	 * At this point all fcport's software-states are cleared.  Perform any
 	 * final cleanup of firmware resources (PCBs and XCBs).
 	 */
-	if (fcport->loop_id != FC_NO_LOOP_ID &&
-	    !test_bit(UNLOADING, &fcport->vha->dpc_flags)) {
+	if (fcport->loop_id != FC_NO_LOOP_ID) {
 		if (IS_FWI2_CAPABLE(fcport->vha->hw))
 			fcport->vha->hw->isp_ops->fabric_logout(fcport->vha,
 			    fcport->loop_id, fcport->d_id.b.domain,
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2755,6 +2755,7 @@ qla2x00_remove_one(struct pci_dev *pdev)
 
 	ha->flags.host_shutting_down = 1;
 
+	set_bit(UNLOADING, &base_vha->dpc_flags);
 	mutex_lock(&ha->vport_lock);
 	while (ha->cur_vport_count) {
 		struct Scsi_Host *scsi_host;
@@ -2784,8 +2785,6 @@ qla2x00_remove_one(struct pci_dev *pdev)
 			    "Error while clearing DRV-Presence.\n");
 	}
 
-	set_bit(UNLOADING, &base_vha->dpc_flags);
-
 	qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
 
 	qla2x00_dfs_remove(base_vha);

[ 036/221] SCSI: qla2xxx: Free rsp_data even on error in qla2x00_process_loopback()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve Hodgson <steve@purestorage.com>

commit 9bceab4e08c5e329e9def7fe1cab41c467236517 upstream.

Signed-off-by: Steve Hodgson <steve@purestorage.com>
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/qla2xxx/qla_bsg.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -743,7 +743,7 @@ qla2x00_process_loopback(struct fc_bsg_j
 				ql_log(ql_log_warn, vha, 0x701f,
 				    "Get port config failed.\n");
 				rval = -EPERM;
-				goto done_free_dma_req;
+				goto done_free_dma_rsp;
 			}
 
 			ql_dbg(ql_dbg_user, vha, 0x70c0,
@@ -762,7 +762,7 @@ qla2x00_process_loopback(struct fc_bsg_j
 
 			if (rval) {
 				rval = -EPERM;
-				goto done_free_dma_req;
+				goto done_free_dma_rsp;
 			}
 
 			type = "FC_BSG_HST_VENDOR_LOOPBACK";
@@ -795,7 +795,7 @@ qla2x00_process_loopback(struct fc_bsg_j
 				}
 
 				rval = -EIO;
-				goto done_free_dma_req;
+				goto done_free_dma_rsp;
 			}
 		} else {
 			type = "FC_BSG_HST_VENDOR_LOOPBACK";
@@ -830,6 +830,7 @@ qla2x00_process_loopback(struct fc_bsg_j
 	fw_sts_ptr += sizeof(response);
 	*fw_sts_ptr = command_sent;
 
+done_free_dma_rsp:
 	dma_free_coherent(&ha->pdev->dev, rsp_data_len,
 		rsp_data, rsp_data_dma);
 done_free_dma_req:

[ 037/221] iscsi-target: Fix bug in handling of ExpStatSN ACK during u32 wrap-around

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve Hodgson <steve@purestorage.com>

commit 64c13330a38935120501b19c97a3e6095747c7a1 upstream.

This patch fixes a bug in the hanlding of initiator provided ExpStatSN and
individual iscsi_cmd->stat_sn comparision during iscsi_conn->stat_sn
wrap-around within iscsit_ack_from_expstatsn() code.

This bug would manifest itself as iscsi_cmd descriptors not being Acked
by a lower ExpStatSn, causing them to be leaked until an iSCSI connection
or session reinstatement event occurs to release all commands.

Also fix up two other uses of incorrect CmdSN SNA comparison to use wrapper
usage from include/scsi/iscsi_proto.h.

Signed-off-by: Steve Hodgson <steve@purestorage.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target.c      |    2 +-
 drivers/target/iscsi/iscsi_target_erl2.c |    2 +-
 drivers/target/iscsi/iscsi_target_tmr.c  |    4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -735,7 +735,7 @@ static void iscsit_ack_from_expstatsn(st
 	list_for_each_entry(cmd, &conn->conn_cmd_list, i_conn_node) {
 		spin_lock(&cmd->istate_lock);
 		if ((cmd->i_state == ISTATE_SENT_STATUS) &&
-		    (cmd->stat_sn < exp_statsn)) {
+		    iscsi_sna_lt(cmd->stat_sn, exp_statsn)) {
 			cmd->i_state = ISTATE_REMOVE;
 			spin_unlock(&cmd->istate_lock);
 			iscsit_add_cmd_to_immediate_queue(cmd, conn,
--- a/drivers/target/iscsi/iscsi_target_erl2.c
+++ b/drivers/target/iscsi/iscsi_target_erl2.c
@@ -372,7 +372,7 @@ int iscsit_prepare_cmds_for_realligance(
 		 * made generic here.
 		 */
 		if (!(cmd->cmd_flags & ICF_OOO_CMDSN) && !cmd->immediate_cmd &&
-		     (cmd->cmd_sn >= conn->sess->exp_cmd_sn)) {
+		     iscsi_sna_gte(cmd->stat_sn, conn->sess->exp_cmd_sn)) {
 			list_del(&cmd->i_conn_node);
 			spin_unlock_bh(&conn->cmd_lock);
 			iscsit_free_cmd(cmd);
--- a/drivers/target/iscsi/iscsi_target_tmr.c
+++ b/drivers/target/iscsi/iscsi_target_tmr.c
@@ -50,8 +50,8 @@ u8 iscsit_tmr_abort_task(
 	if (!ref_cmd) {
 		pr_err("Unable to locate RefTaskTag: 0x%08x on CID:"
 			" %hu.\n", hdr->rtt, conn->cid);
-		return (be32_to_cpu(hdr->refcmdsn) >= conn->sess->exp_cmd_sn &&
-			be32_to_cpu(hdr->refcmdsn) <= conn->sess->max_cmd_sn) ?
+		return (iscsi_sna_gte(be32_to_cpu(hdr->refcmdsn), conn->sess->exp_cmd_sn) &&
+			iscsi_sna_lte(be32_to_cpu(hdr->refcmdsn), conn->sess->max_cmd_sn)) ?
 			ISCSI_TMF_RSP_COMPLETE : ISCSI_TMF_RSP_NO_TASK;
 	}
 	if (ref_cmd->cmd_sn != be32_to_cpu(hdr->refcmdsn)) {

[ 038/221] iscsi-target: Always send a response before terminating iSCSI connection

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roland Dreier <roland@purestorage.com>

commit 1c5c12c666fda27c7c494b34934a0a0631a48130 upstream.

There are some cases, for example when the initiator sends an
out-of-bounds ErrorRecoveryLevel value, where the iSCSI target
terminates the connection without sending back any error.  Audit the
login path and add appropriate iscsit_tx_login_rsp() calls to make
sure this doesn't happen.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target_login.c |    8 ++++----
 drivers/target/iscsi/iscsi_target_nego.c  |   10 ++++++++--
 2 files changed, 12 insertions(+), 6 deletions(-)

--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -127,13 +127,13 @@ int iscsi_check_for_session_reinstatemen
 
 	initiatorname_param = iscsi_find_param_from_key(
 			INITIATORNAME, conn->param_list);
-	if (!initiatorname_param)
-		return -1;
-
 	sessiontype_param = iscsi_find_param_from_key(
 			SESSIONTYPE, conn->param_list);
-	if (!sessiontype_param)
+	if (!initiatorname_param || !sessiontype_param) {
+		iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_INITIATOR_ERR,
+			ISCSI_LOGIN_STATUS_MISSING_FIELDS);
 		return -1;
+	}
 
 	sessiontype = (strncmp(sessiontype_param->value, NORMAL, 6)) ? 1 : 0;
 
--- a/drivers/target/iscsi/iscsi_target_nego.c
+++ b/drivers/target/iscsi/iscsi_target_nego.c
@@ -620,8 +620,11 @@ static int iscsi_target_handle_csg_one(s
 			login->req_buf,
 			payload_length,
 			conn);
-	if (ret < 0)
+	if (ret < 0) {
+		iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_INITIATOR_ERR,
+				ISCSI_LOGIN_STATUS_INIT_ERR);
 		return -1;
+	}
 
 	if (login->first_request)
 		if (iscsi_target_check_first_request(conn, login) < 0)
@@ -636,8 +639,11 @@ static int iscsi_target_handle_csg_one(s
 			login->rsp_buf,
 			&login->rsp_length,
 			conn->param_list);
-	if (ret < 0)
+	if (ret < 0) {
+		iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_INITIATOR_ERR,
+				ISCSI_LOGIN_STATUS_INIT_ERR);
 		return -1;
+	}
 
 	if (!login->auth_complete &&
 	     ISCSI_TPG_ATTRIB(ISCSI_TPG_C(conn))->authentication) {

[ 039/221] iscsit: use GFP_ATOMIC under spin lock

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>

commit 3c989d7603872bf878840f7ce3ea49b73bea4c6c upstream.

The function iscsit_build_conn_drop_async_message() is called
from iscsit_close_connection() with spin lock 'sess->conn_lock'
held, so we should use GFP_ATOMIC instead of GFP_KERNEL.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -2360,7 +2360,7 @@ static void iscsit_build_conn_drop_async
 	if (!conn_p)
 		return;
 
-	cmd = iscsit_allocate_cmd(conn_p, GFP_KERNEL);
+	cmd = iscsit_allocate_cmd(conn_p, GFP_ATOMIC);
 	if (!cmd) {
 		iscsit_dec_conn_usage_count(conn_p);
 		return;

[ 040/221] qla2xxx: Look up LUN for abort requests

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve Hodgson <steve@purestorage.com>

commit 06e97b489006f28e23bb028febfa1c01c266d676 upstream.

Search through the list of pending commands on the session list to find
the command the initiator is actually aborting, so that we can pass the
correct LUN to the core TMR handling code.

(nab: Allow abort requests to work to LUN=0 with mainline target code)

Signed-off-by: Steve Hodgson <steve@purestorage.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/qla2xxx/qla_target.c |   21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1264,8 +1264,27 @@ static int __qlt_24xx_handle_abts(struct
 	struct abts_recv_from_24xx *abts, struct qla_tgt_sess *sess)
 {
 	struct qla_hw_data *ha = vha->hw;
+	struct se_session *se_sess = sess->se_sess;
 	struct qla_tgt_mgmt_cmd *mcmd;
+	struct se_cmd *se_cmd;
+	u32 lun = 0;
 	int rc;
+	bool found_lun = false;
+
+	spin_lock(&se_sess->sess_cmd_lock);
+	list_for_each_entry(se_cmd, &se_sess->sess_cmd_list, se_cmd_list) {
+		struct qla_tgt_cmd *cmd =
+			container_of(se_cmd, struct qla_tgt_cmd, se_cmd);
+		if (cmd->tag == abts->exchange_addr_to_abort) {
+			lun = cmd->unpacked_lun;
+			found_lun = true;
+			break;
+		}
+	}
+	spin_unlock(&se_sess->sess_cmd_lock);
+
+	if (!found_lun)
+		return -ENOENT;
 
 	ql_dbg(ql_dbg_tgt_mgt, vha, 0xf00f,
 	    "qla_target(%d): task abort (tag=%d)\n",
@@ -1283,7 +1302,7 @@ static int __qlt_24xx_handle_abts(struct
 	mcmd->sess = sess;
 	memcpy(&mcmd->orig_iocb.abts, abts, sizeof(mcmd->orig_iocb.abts));
 
-	rc = ha->tgt.tgt_ops->handle_tmr(mcmd, 0, TMR_ABORT_TASK,
+	rc = ha->tgt.tgt_ops->handle_tmr(mcmd, lun, TMR_ABORT_TASK,
 	    abts->exchange_addr_to_abort);
 	if (rc != 0) {
 		ql_dbg(ql_dbg_tgt_mgt, vha, 0xf052,

[ 041/221] sata_promise: fix hardreset lockdep error

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikael Pettersson <mikpe@it.uu.se>

commit 3100d49d3cd236443faae9d81137c81b22d36003 upstream.

sata_promise's pdc_hard_reset_port() needs to serialize because it
flips a port-specific bit in controller register that's shared by
all ports. The code takes the ata host lock for this, but that's
broken because an interrupt may arrive on our irq during the hard
reset sequence, and that too will take the ata host lock. With
lockdep enabled a big nasty warning is seen.

Fixed by adding private state to the ata host structure, containing
a second lock used only for serializing the hard reset sequences.
This eliminated the lockdep warnings both on my test rig and on
the original reporter's machine.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Tested-by: Adko Branil <adkobranil@yahoo.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/sata_promise.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -147,6 +147,10 @@ struct pdc_port_priv {
 	dma_addr_t		pkt_dma;
 };
 
+struct pdc_host_priv {
+	spinlock_t hard_reset_lock;
+};
+
 static int pdc_sata_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
 static int pdc_sata_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
 static int pdc_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
@@ -801,9 +805,10 @@ static void pdc_hard_reset_port(struct a
 	void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR];
 	void __iomem *pcictl_b1_mmio = host_mmio + PDC_PCI_CTL + 1;
 	unsigned int ata_no = pdc_ata_port_to_ata_no(ap);
+	struct pdc_host_priv *hpriv = ap->host->private_data;
 	u8 tmp;
 
-	spin_lock(&ap->host->lock);
+	spin_lock(&hpriv->hard_reset_lock);
 
 	tmp = readb(pcictl_b1_mmio);
 	tmp &= ~(0x10 << ata_no);
@@ -814,7 +819,7 @@ static void pdc_hard_reset_port(struct a
 	writeb(tmp, pcictl_b1_mmio);
 	readb(pcictl_b1_mmio); /* flush */
 
-	spin_unlock(&ap->host->lock);
+	spin_unlock(&hpriv->hard_reset_lock);
 }
 
 static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class,
@@ -1182,6 +1187,7 @@ static int pdc_ata_init_one(struct pci_d
 	const struct ata_port_info *pi = &pdc_port_info[ent->driver_data];
 	const struct ata_port_info *ppi[PDC_MAX_PORTS];
 	struct ata_host *host;
+	struct pdc_host_priv *hpriv;
 	void __iomem *host_mmio;
 	int n_ports, i, rc;
 	int is_sataii_tx4;
@@ -1218,6 +1224,11 @@ static int pdc_ata_init_one(struct pci_d
 		dev_err(&pdev->dev, "failed to allocate host\n");
 		return -ENOMEM;
 	}
+	hpriv = devm_kzalloc(&pdev->dev, sizeof *hpriv, GFP_KERNEL);
+	if (!hpriv)
+		return -ENOMEM;
+	spin_lock_init(&hpriv->hard_reset_lock);
+	host->private_data = hpriv;
 	host->iomap = pcim_iomap_table(pdev);
 
 	is_sataii_tx4 = pdc_is_sataii_tx4(pi->flags);

[ 042/221] sony-laptop: fix SNC buffer calls when SN06 returns Integers

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mattia Dongili <malattia@linux.it>

commit dcbeec264d73b7228ffdfe767eab69b2353099b1 upstream.

SN06 in some cases returns an Integer instead of a buffer. While the
code handling the return value was trying to cope with the difference,
the memcpy call was not making any difference between the two types of
acpi_object union. This regression was introduced in 3.5.
While there also rework the return value logic to improve readability.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=48671
Cc: Fabrizio Narni <shibotto@gmail.com>
Cc: <mus.svz@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/x86/sony-laptop.c |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -786,28 +786,29 @@ static int sony_nc_int_call(acpi_handle
 static int sony_nc_buffer_call(acpi_handle handle, char *name, u64 *value,
 		void *buffer, size_t buflen)
 {
+	int ret = 0;
 	size_t len = len;
 	union acpi_object *object = __call_snc_method(handle, name, value);
 
 	if (!object)
 		return -EINVAL;
 
-	if (object->type == ACPI_TYPE_BUFFER)
+	if (object->type == ACPI_TYPE_BUFFER) {
 		len = MIN(buflen, object->buffer.length);
+		memcpy(buffer, object->buffer.pointer, len);
 
-	else if (object->type == ACPI_TYPE_INTEGER)
+	} else if (object->type == ACPI_TYPE_INTEGER) {
 		len = MIN(buflen, sizeof(object->integer.value));
+		memcpy(buffer, &object->integer.value, len);
 
-	else {
+	} else {
 		pr_warn("Invalid acpi_object: expected 0x%x got 0x%x\n",
 				ACPI_TYPE_BUFFER, object->type);
-		kfree(object);
-		return -EINVAL;
+		ret = -EINVAL;
 	}
 
-	memcpy(buffer, object->buffer.pointer, len);
 	kfree(object);
-	return 0;
+	return ret;
 }
 
 struct sony_nc_handles {

[ 043/221] IB/mlx4: Fix spinlock order to avoid lockdep warnings

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

commit ceb7decb366591e9b67d70832e07f5d240572a3d upstream.

lockdep warns about taking a hard-irq-unsafe lock (sriov->id_map_lock)
inside a hard-irq-safe lock (sriov->going_down_lock).

Since id_map_lock is never taken in the interrupt context, we can
simply reverse the order of taking the two spinlocks, thus avoiding
the warning and the depencency.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx4/cm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/infiniband/hw/mlx4/cm.c
+++ b/drivers/infiniband/hw/mlx4/cm.c
@@ -268,15 +268,15 @@ static void schedule_delayed(struct ib_d
 	struct mlx4_ib_sriov *sriov = &to_mdev(ibdev)->sriov;
 	unsigned long flags;
 
-	spin_lock_irqsave(&sriov->going_down_lock, flags);
 	spin_lock(&sriov->id_map_lock);
+	spin_lock_irqsave(&sriov->going_down_lock, flags);
 	/*make sure that there is no schedule inside the scheduled work.*/
 	if (!sriov->is_going_down) {
 		id->scheduled_delete = 1;
 		schedule_delayed_work(&id->timeout, CM_CLEANUP_CACHE_TIMEOUT);
 	}
-	spin_unlock(&sriov->id_map_lock);
 	spin_unlock_irqrestore(&sriov->going_down_lock, flags);
+	spin_unlock(&sriov->id_map_lock);
 }
 
 int mlx4_ib_multiplex_cm_handler(struct ib_device *ibdev, int port, int slave_id,

[ 044/221] mlx4_core: Fix potential deadlock in mlx4_eq_int()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

commit 311f813a2daefcba03f706a692fe0c67888d7622 upstream.

The slave_state_lock spinlock is used in both interrupt context and
process context, hence irq locking must be used.  Found by lockdep.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/mellanox/mlx4/cmd.c |    9 +++++----
 drivers/net/ethernet/mellanox/mlx4/eq.c  |   10 ++++++----
 2 files changed, 11 insertions(+), 8 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -1498,6 +1498,7 @@ static void mlx4_master_do_cmd(struct ml
 	u32 reply;
 	u8 is_going_down = 0;
 	int i;
+	unsigned long flags;
 
 	slave_state[slave].comm_toggle ^= 1;
 	reply = (u32) slave_state[slave].comm_toggle << 31;
@@ -1576,12 +1577,12 @@ static void mlx4_master_do_cmd(struct ml
 		mlx4_warn(dev, "Bad comm cmd:%d from slave:%d\n", cmd, slave);
 		goto reset_slave;
 	}
-	spin_lock(&priv->mfunc.master.slave_state_lock);
+	spin_lock_irqsave(&priv->mfunc.master.slave_state_lock, flags);
 	if (!slave_state[slave].is_slave_going_down)
 		slave_state[slave].last_cmd = cmd;
 	else
 		is_going_down = 1;
-	spin_unlock(&priv->mfunc.master.slave_state_lock);
+	spin_unlock_irqrestore(&priv->mfunc.master.slave_state_lock, flags);
 	if (is_going_down) {
 		mlx4_warn(dev, "Slave is going down aborting command(%d)"
 			  " executing from slave:%d\n",
@@ -1597,10 +1598,10 @@ static void mlx4_master_do_cmd(struct ml
 reset_slave:
 	/* cleanup any slave resources */
 	mlx4_delete_all_resources_for_slave(dev, slave);
-	spin_lock(&priv->mfunc.master.slave_state_lock);
+	spin_lock_irqsave(&priv->mfunc.master.slave_state_lock, flags);
 	if (!slave_state[slave].is_slave_going_down)
 		slave_state[slave].last_cmd = MLX4_COMM_CMD_RESET;
-	spin_unlock(&priv->mfunc.master.slave_state_lock);
+	spin_unlock_irqrestore(&priv->mfunc.master.slave_state_lock, flags);
 	/*with slave in the middle of flr, no need to clean resources again.*/
 inform_slave_state:
 	memset(&slave_state[slave].event_eq, 0,
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -401,6 +401,7 @@ void mlx4_master_handle_slave_flr(struct
 	struct mlx4_slave_state *slave_state = priv->mfunc.master.slave_state;
 	int i;
 	int err;
+	unsigned long flags;
 
 	mlx4_dbg(dev, "mlx4_handle_slave_flr\n");
 
@@ -412,10 +413,10 @@ void mlx4_master_handle_slave_flr(struct
 
 			mlx4_delete_all_resources_for_slave(dev, i);
 			/*return the slave to running mode*/
-			spin_lock(&priv->mfunc.master.slave_state_lock);
+			spin_lock_irqsave(&priv->mfunc.master.slave_state_lock, flags);
 			slave_state[i].last_cmd = MLX4_COMM_CMD_RESET;
 			slave_state[i].is_slave_going_down = 0;
-			spin_unlock(&priv->mfunc.master.slave_state_lock);
+			spin_unlock_irqrestore(&priv->mfunc.master.slave_state_lock, flags);
 			/*notify the FW:*/
 			err = mlx4_cmd(dev, 0, i, 0, MLX4_CMD_INFORM_FLR_DONE,
 				       MLX4_CMD_TIME_CLASS_A, MLX4_CMD_WRAPPED);
@@ -440,6 +441,7 @@ static int mlx4_eq_int(struct mlx4_dev *
 	u8 update_slave_state;
 	int i;
 	enum slave_port_gen_event gen_event;
+	unsigned long flags;
 
 	while ((eqe = next_eqe_sw(eq))) {
 		/*
@@ -647,13 +649,13 @@ static int mlx4_eq_int(struct mlx4_dev *
 			} else
 				update_slave_state = 1;
 
-			spin_lock(&priv->mfunc.master.slave_state_lock);
+			spin_lock_irqsave(&priv->mfunc.master.slave_state_lock, flags);
 			if (update_slave_state) {
 				priv->mfunc.master.slave_state[flr_slave].active = false;
 				priv->mfunc.master.slave_state[flr_slave].last_cmd = MLX4_COMM_CMD_FLR;
 				priv->mfunc.master.slave_state[flr_slave].is_slave_going_down = 1;
 			}
-			spin_unlock(&priv->mfunc.master.slave_state_lock);
+			spin_unlock_irqrestore(&priv->mfunc.master.slave_state_lock, flags);
 			queue_work(priv->mfunc.master.comm_wq,
 				   &priv->mfunc.master.slave_flr_event_work);
 			break;

[ 045/221] pstore/ram: Fix undefined usage of rounddown_pow_of_two(0)

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maxime Bizon <mbizon@freebox.fr>

commit b042e47491ba5f487601b5141a3f1d8582304170 upstream.

record_size / console_size / ftrace_size can be 0 (this is how you disable
the feature), but rounddown_pow_of_two(0) is undefined. As suggested by
Kees Cook, use !is_power_of_2() as a condition to call
rounddown_pow_of_two and avoid its undefined behavior on the value 0. This
issue has been present since commit 1894a253 (ramoops: Move to
fs/pstore/ram.c).

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/pstore/ram.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -374,10 +374,14 @@ static int __devinit ramoops_probe(struc
 		goto fail_out;
 	}
 
-	pdata->mem_size = rounddown_pow_of_two(pdata->mem_size);
-	pdata->record_size = rounddown_pow_of_two(pdata->record_size);
-	pdata->console_size = rounddown_pow_of_two(pdata->console_size);
-	pdata->ftrace_size = rounddown_pow_of_two(pdata->ftrace_size);
+	if (!is_power_of_2(pdata->mem_size))
+		pdata->mem_size = rounddown_pow_of_two(pdata->mem_size);
+	if (!is_power_of_2(pdata->record_size))
+		pdata->record_size = rounddown_pow_of_two(pdata->record_size);
+	if (!is_power_of_2(pdata->console_size))
+		pdata->console_size = rounddown_pow_of_two(pdata->console_size);
+	if (!is_power_of_2(pdata->ftrace_size))
+		pdata->ftrace_size = rounddown_pow_of_two(pdata->ftrace_size);
 
 	cxt->dump_read_cnt = 0;
 	cxt->size = pdata->mem_size;

[ 046/221] libata: set dma_mode to 0xff in reset

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Lu <aaron.lu@intel.com>

commit 5416912af75de9cba5d1c75b99a7888b0bbbd2fb upstream.

ata_device->dma_mode's initial value is zero, which is not a valid dma
mode, but ata_dma_enabled will return true for this value. This patch
sets dma_mode to 0xff in reset function, so that ata_dma_enabled will
not return true for this case, or it will cause problem for pata_acpi.

The corrsponding bugzilla page is at:
https://bugzilla.kernel.org/show_bug.cgi?id=49151

Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Tested-by: Szymon Janc <szymon@janc.net.pl>
Tested-by: Dutra Julio <dutra.julio@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    1 +
 drivers/ata/libata-eh.c   |    1 +
 2 files changed, 2 insertions(+)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2560,6 +2560,7 @@ int ata_bus_probe(struct ata_port *ap)
 		 * bus as we may be talking too fast.
 		 */
 		dev->pio_mode = XFER_PIO_0;
+		dev->dma_mode = 0xff;
 
 		/* If the controller has a pio mode setup function
 		 * then use it to set the chipset to rights. Don't
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2657,6 +2657,7 @@ int ata_eh_reset(struct ata_link *link,
 		 * bus as we may be talking too fast.
 		 */
 		dev->pio_mode = XFER_PIO_0;
+		dev->dma_mode = 0xff;
 
 		/* If the controller has a pio mode setup function
 		 * then use it to set the chipset to rights. Don't

[ 047/221] libata: fix Null pointer dereference on disk error

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xiaotian Feng <xtfeng@gmail.com>

commit 26cd4d65deba587f3cf2329b6869ce02bcbe68ec upstream.

Following oops were observed when disk error happened:

[ 4272.896937] sd 0:0:0:0: [sda] Unhandled error code
[ 4272.896939] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 4272.896942] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 5a de a7 00 00 08 00
[ 4272.896951] end_request: I/O error, dev sda, sector 5955239
[ 4291.574947] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 4291.658305] IP: [] ahci_activity_show+0x1/0x40
[ 4291.730090] PGD 76dbbc067 PUD 6c4fba067 PMD 0
[ 4291.783408] Oops: 0000 [#1] SMP
[ 4291.822100] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/sw_activity
[ 4291.934235] CPU 9
[ 4291.958301] Pid: 27942, comm: hwinfo ......

ata_scsi_find_dev could return NULL, so ata_scsi_activity_{show,store} should check if atadev is NULL.

Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-scsi.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -309,7 +309,8 @@ ata_scsi_activity_show(struct device *de
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *atadev = ata_scsi_find_dev(ap, sdev);
 
-	if (ap->ops->sw_activity_show && (ap->flags & ATA_FLAG_SW_ACTIVITY))
+	if (atadev && ap->ops->sw_activity_show &&
+	    (ap->flags & ATA_FLAG_SW_ACTIVITY))
 		return ap->ops->sw_activity_show(atadev, buf);
 	return -EINVAL;
 }
@@ -324,7 +325,8 @@ ata_scsi_activity_store(struct device *d
 	enum sw_activity val;
 	int rc;
 
-	if (ap->ops->sw_activity_store && (ap->flags & ATA_FLAG_SW_ACTIVITY)) {
+	if (atadev && ap->ops->sw_activity_store &&
+	    (ap->flags & ATA_FLAG_SW_ACTIVITY)) {
 		val = simple_strtoul(buf, NULL, 0);
 		switch (val) {
 		case OFF: case BLINK_ON: case BLINK_OFF:

[ 048/221] target/file: Fix 32-bit highmem breakage for SGL -> iovec mapping

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

commit 40ff2c3b3da35dd3a00ac6722056a59b4b3f2caf upstream.

This patch changes vectored file I/O to use kmap + kunmap when mapping
incoming SGL memory -> struct iovec in order to properly support 32-bit
highmem configurations.  This is because an extra bounce buffer may be
required when processing scatterlist pages allocated with GFP_KERNEL.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_file.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -260,7 +260,7 @@ static int fd_do_readv(struct se_cmd *cm
 
 	for_each_sg(sgl, sg, sgl_nents, i) {
 		iov[i].iov_len = sg->length;
-		iov[i].iov_base = sg_virt(sg);
+		iov[i].iov_base = kmap(sg_page(sg)) + sg->offset;
 	}
 
 	old_fs = get_fs();
@@ -268,6 +268,8 @@ static int fd_do_readv(struct se_cmd *cm
 	ret = vfs_readv(fd, &iov[0], sgl_nents, &pos);
 	set_fs(old_fs);
 
+	for_each_sg(sgl, sg, sgl_nents, i)
+		kunmap(sg_page(sg));
 	kfree(iov);
 	/*
 	 * Return zeros and GOOD status even if the READ did not return
@@ -313,7 +315,7 @@ static int fd_do_writev(struct se_cmd *c
 
 	for_each_sg(sgl, sg, sgl_nents, i) {
 		iov[i].iov_len = sg->length;
-		iov[i].iov_base = sg_virt(sg);
+		iov[i].iov_base = kmap(sg_page(sg)) + sg->offset;
 	}
 
 	old_fs = get_fs();
@@ -321,6 +323,9 @@ static int fd_do_writev(struct se_cmd *c
 	ret = vfs_writev(fd, &iov[0], sgl_nents, &pos);
 	set_fs(old_fs);
 
+	for_each_sg(sgl, sg, sgl_nents, i)
+		kunmap(sg_page(sg));
+
 	kfree(iov);
 
 	if (ret < 0 || ret != cmd->data_length) {

[ 049/221] target/tcm_fc: fix the lockdep warning due to inconsistent lock state

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yi Zou <yi.zou@intel.com>

commit 9f4ad44b264f8bb61ffdd607148215566568430d upstream.

The lockdep warning below is in theory correct but it will be in really weird
rare situation that ends up that deadlock since the tcm fc session is hashed
based the rport id. Nonetheless, the complaining below is about rcu callback
that does the transport_deregister_session() is happening in softirq, where
transport_register_session() that happens earlier is not. This triggers the
lockdep warning below. So, just fix this to make lockdep happy by disabling
the soft irq before calling transport_register_session() in ft_prli.

BTW, this was found in FCoE VN2VN over two VMs, couple of create and destroy
would get this triggered.

v1: was enforcing register to be in softirq context which was not righ. See,
http://www.spinics.net/lists/target-devel/msg03614.html

v2: following comments from Roland&Nick (thanks), it seems we don't have to
do transport_deregister_session() in rcu callback, so move it into ft_sess_free()
but still do kfree() of the corresponding ft_sess struct in rcu callback to
make sure the ft_sess is not freed till the rcu callback.

...
[ 1328.370592] scsi2 : FCoE Driver
[ 1328.383429] fcoe: No FDMI support.
[ 1328.384509] host2: libfc: Link up on port (000000)
[ 1328.934229] host2: Assigned Port ID 00a292
[ 1357.232132] host2: rport 00a393: Remove port
[ 1357.232568] host2: rport 00a393: Port sending LOGO from Ready state
[ 1357.233692] host2: rport 00a393: Delete port
[ 1357.234472] host2: rport 00a393: work event 3
[ 1357.234969] host2: rport 00a393: callback ev 3
[ 1357.235979] host2: rport 00a393: Received a LOGO response closed
[ 1357.236706] host2: rport 00a393: work delete
[ 1357.237481]
[ 1357.237631] =================================
[ 1357.238064] [ INFO: inconsistent lock state ]
[ 1357.238450] 3.7.0-rc7-yikvm+ #3 Tainted: G           O
[ 1357.238450] ---------------------------------
[ 1357.238450] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[ 1357.238450] ksoftirqd/0/3 [HC0[0]:SC1[1]:HE0:SE0] takes:
[ 1357.238450]  (&(&se_tpg->session_lock)->rlock){+.?...}, at: [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod]
[ 1357.238450] {SOFTIRQ-ON-W} state was registered at:
[ 1357.238450]   [<ffffffff810834f5>] mark_held_locks+0x6d/0x95
[ 1357.238450]   [<ffffffff8108364a>] trace_hardirqs_on_caller+0x12d/0x197
[ 1357.238450]   [<ffffffff810836c1>] trace_hardirqs_on+0xd/0xf
[ 1357.238450]   [<ffffffff8149caba>] _raw_spin_unlock_irq+0x2d/0x45
[ 1357.238450]   [<ffffffffa01e8d10>] __transport_register_session+0xb8/0x122 [target_core_mod]
[ 1357.238450]   [<ffffffffa01e8dbe>] transport_register_session+0x44/0x5a [target_core_mod]
[ 1357.238450]   [<ffffffffa018e32c>] ft_prli+0x1e3/0x275 [tcm_fc]
[ 1357.238450]   [<ffffffffa0160e8d>] fc_rport_recv_req+0x95e/0xdc5 [libfc]
[ 1357.238450]   [<ffffffffa015be88>] fc_lport_recv_els_req+0xc4/0xd5 [libfc]
[ 1357.238450]   [<ffffffffa015c778>] fc_lport_recv_req+0x12f/0x18f [libfc]
[ 1357.238450]   [<ffffffffa015a6d7>] fc_exch_recv+0x8ba/0x981 [libfc]
[ 1357.238450]   [<ffffffffa0176d7a>] fcoe_percpu_receive_thread+0x47a/0x4e2 [fcoe]
[ 1357.238450]   [<ffffffff810549f1>] kthread+0xb1/0xb9
[ 1357.238450]   [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0
[ 1357.238450] irq event stamp: 275411
[ 1357.238450] hardirqs last  enabled at (275410): [<ffffffff810bb6a0>] rcu_process_callbacks+0x229/0x42a
[ 1357.238450] hardirqs last disabled at (275411): [<ffffffff8149c2f7>] _raw_spin_lock_irqsave+0x22/0x8e
[ 1357.238450] softirqs last  enabled at (275394): [<ffffffff8103d669>] __do_softirq+0x246/0x26f
[ 1357.238450] softirqs last disabled at (275399): [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62
[ 1357.238450]
[ 1357.238450] other info that might help us debug this:
[ 1357.238450]  Possible unsafe locking scenario:
[ 1357.238450]
[ 1357.238450]        CPU0
[ 1357.238450]        ----
[ 1357.238450]   lock(&(&se_tpg->session_lock)->rlock);
[ 1357.238450]   <Interrupt>
[ 1357.238450]     lock(&(&se_tpg->session_lock)->rlock);
[ 1357.238450]
[ 1357.238450]  *** DEADLOCK ***
[ 1357.238450]
[ 1357.238450] no locks held by ksoftirqd/0/3.
[ 1357.238450]
[ 1357.238450] stack backtrace:
[ 1357.238450] Pid: 3, comm: ksoftirqd/0 Tainted: G           O 3.7.0-rc7-yikvm+ #3
[ 1357.238450] Call Trace:
[ 1357.238450]  [<ffffffff8149399a>] print_usage_bug+0x1f5/0x206
[ 1357.238450]  [<ffffffff8100da59>] ? save_stack_trace+0x2c/0x49
[ 1357.238450]  [<ffffffff81082aae>] ? print_irq_inversion_bug.part.14+0x1ae/0x1ae
[ 1357.238450]  [<ffffffff81083336>] mark_lock+0x106/0x258
[ 1357.238450]  [<ffffffff81084e34>] __lock_acquire+0x2e7/0xe53
[ 1357.238450]  [<ffffffff8102903d>] ? pvclock_clocksource_read+0x48/0xb4
[ 1357.238450]  [<ffffffff810ba6a3>] ? rcu_process_gp_end+0xc0/0xc9
[ 1357.238450]  [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod]
[ 1357.238450]  [<ffffffff81085ef1>] lock_acquire+0x119/0x143
[ 1357.238450]  [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod]
[ 1357.238450]  [<ffffffff8149c329>] _raw_spin_lock_irqsave+0x54/0x8e
[ 1357.238450]  [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod]
[ 1357.238450]  [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod]
[ 1357.238450]  [<ffffffff810bb6a0>] ? rcu_process_callbacks+0x229/0x42a
[ 1357.238450]  [<ffffffffa018ddc5>] ft_sess_rcu_free+0x17/0x24 [tcm_fc]
[ 1357.238450]  [<ffffffffa018ddae>] ? ft_sess_free+0x1b/0x1b [tcm_fc]
[ 1357.238450]  [<ffffffff810bb6d7>] rcu_process_callbacks+0x260/0x42a
[ 1357.238450]  [<ffffffff8103d55d>] __do_softirq+0x13a/0x26f
[ 1357.238450]  [<ffffffff8149b34e>] ? __schedule+0x65f/0x68e
[ 1357.238450]  [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62
[ 1357.238450]  [<ffffffff8105c83c>] smpboot_thread_fn+0x1a5/0x1aa
[ 1357.238450]  [<ffffffff8105c697>] ? smpboot_unregister_percpu_thread+0x47/0x47
[ 1357.238450]  [<ffffffff810549f1>] kthread+0xb1/0xb9
[ 1357.238450]  [<ffffffff8149b49d>] ? wait_for_common+0xbb/0x10a
[ 1357.238450]  [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59
[ 1357.238450]  [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0
[ 1357.238450]  [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59
[ 1417.440099]  rport-2:0-0: blocked FC remote port time out: removing rport

Signed-off-by: Yi Zou <yi.zou@intel.com>
Cc: Open-FCoE <devel@open-fcoe.org>
Cc: Nicholas A. Bellinger <nab@risingtidesystems.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/tcm_fc/tfc_sess.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/target/tcm_fc/tfc_sess.c
+++ b/drivers/target/tcm_fc/tfc_sess.c
@@ -430,7 +430,6 @@ static void ft_sess_rcu_free(struct rcu_
 {
 	struct ft_sess *sess = container_of(rcu, struct ft_sess, rcu);
 
-	transport_deregister_session(sess->se_sess);
 	kfree(sess);
 }
 
@@ -438,6 +437,7 @@ static void ft_sess_free(struct kref *kr
 {
 	struct ft_sess *sess = container_of(kref, struct ft_sess, kref);
 
+	transport_deregister_session(sess->se_sess);
 	call_rcu(&sess->rcu, ft_sess_rcu_free);
 }
 

[ 050/221] sbp-target: fix error path in sbp_make_tpg()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Boot <bootc@bootc.net>

commit e1fe2060d7e8f58a69374135e32e90f0bb79a7fd upstream.

If the TPG memory is allocated successfully, but we fail further along
in the function, a dangling pointer to freed memory is left in the TPort
structure. This is mostly harmless, but does prevent re-trying the
operation without first removing the TPort altogether.

Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Chris Boot <bootc@bootc.net>
Cc: Andy Grover <agrover@redhat.com>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/sbp/sbp_target.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

--- a/drivers/target/sbp/sbp_target.c
+++ b/drivers/target/sbp/sbp_target.c
@@ -2207,20 +2207,23 @@ static struct se_portal_group *sbp_make_
 	tport->mgt_agt = sbp_management_agent_register(tport);
 	if (IS_ERR(tport->mgt_agt)) {
 		ret = PTR_ERR(tport->mgt_agt);
-		kfree(tpg);
-		return ERR_PTR(ret);
+		goto out_free_tpg;
 	}
 
 	ret = core_tpg_register(&sbp_fabric_configfs->tf_ops, wwn,
 			&tpg->se_tpg, (void *)tpg,
 			TRANSPORT_TPG_TYPE_NORMAL);
-	if (ret < 0) {
-		sbp_management_agent_unregister(tport->mgt_agt);
-		kfree(tpg);
-		return ERR_PTR(ret);
-	}
+	if (ret < 0)
+		goto out_unreg_mgt_agt;
 
 	return &tpg->se_tpg;
+
+out_unreg_mgt_agt:
+	sbp_management_agent_unregister(tport->mgt_agt);
+out_free_tpg:
+	tport->tpg = NULL;
+	kfree(tpg);
+	return ERR_PTR(ret);
 }
 
 static void sbp_drop_tpg(struct se_portal_group *se_tpg)

[ 051/221] mfd: wm8994: Add support for WM1811 rev E

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit fee546ce8cfd9dea1f53175f627e17ef5ff05df4 upstream.

This is supported identically to the previous revisions.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mfd/wm8994-core.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -557,6 +557,7 @@ static __devinit int wm8994_device_init(
 		case 1:
 		case 2:
 		case 3:
+		case 4:
 			regmap_patch = wm1811_reva_patch;
 			patch_regs = ARRAY_SIZE(wm1811_reva_patch);
 			break;

[ 052/221] mfd: Only unregister platform devices allocated by the mfd core

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>

commit b9fbb62eb61452d728c39b2e5020739c575aac53 upstream.

mfd_remove_devices would iterate over all devices sharing a parent with
an mfd device regardless of whether they were allocated by the mfd core
or not. This especially caused problems when the device structure was
not contained within a platform_device, because to_platform_device is
used on each device pointer.

This patch defines a device_type for mfd devices and checks this is
present from mfd_remove_devices_fn before processing the device.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Peter Tyser <ptyser@xes-inc.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mfd/mfd-core.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -21,6 +21,10 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 
+static struct device_type mfd_dev_type = {
+	.name	= "mfd_device",
+};
+
 int mfd_cell_enable(struct platform_device *pdev)
 {
 	const struct mfd_cell *cell = mfd_get_cell(pdev);
@@ -91,6 +95,7 @@ static int mfd_add_device(struct device
 		goto fail_device;
 
 	pdev->dev.parent = parent;
+	pdev->dev.type = &mfd_dev_type;
 
 	if (parent->of_node && cell->of_compatible) {
 		for_each_child_of_node(parent->of_node, np) {
@@ -204,10 +209,16 @@ EXPORT_SYMBOL(mfd_add_devices);
 
 static int mfd_remove_devices_fn(struct device *dev, void *c)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	struct platform_device *pdev;
+	const struct mfd_cell *cell;
 	atomic_t **usage_count = c;
 
+	if (dev->type != &mfd_dev_type)
+		return 0;
+
+	pdev = to_platform_device(dev);
+	cell = mfd_get_cell(pdev);
+
 	/* find the base address of usage_count pointers (for freeing) */
 	if (!*usage_count || (cell->usage_count < *usage_count))
 		*usage_count = cell->usage_count;

[ 053/221] mfd: Remove Unicode Byte Order Marks from da9055

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert@linux-m68k.org>

commit 90a38d999739f35f4fc925c875e6ee518546b66c upstream.

Older gcc (< 4.4) doesn't like files starting with Unicode BOMs:

include/linux/mfd/da9055/core.h:1: error: stray ‘\357’ in program
include/linux/mfd/da9055/core.h:1: error: stray ‘\273’ in program
include/linux/mfd/da9055/core.h:1: error: stray ‘\277’ in program
include/linux/mfd/da9055/pdata.h:1: error: stray ‘\357’ in program
include/linux/mfd/da9055/pdata.h:1: error: stray ‘\273’ in program
include/linux/mfd/da9055/pdata.h:1: error: stray ‘\277’ in program
include/linux/mfd/da9055/reg.h:1: error: stray ‘\357’ in program
include/linux/mfd/da9055/reg.h:1: error: stray ‘\273’ in program
include/linux/mfd/da9055/reg.h:1: error: stray ‘\277’ in program

Remove the BOMs, the rest of the files is plain ASCII anyway.

Output of "file" before:

include/linux/mfd/da9055/core.h:  UTF-8 Unicode (with BOM) C program text
include/linux/mfd/da9055/pdata.h: UTF-8 Unicode (with BOM) C program text
include/linux/mfd/da9055/reg.h:   UTF-8 Unicode (with BOM) C program text

Output of "file" after:

include/linux/mfd/da9055/core.h:  ASCII C program text
include/linux/mfd/da9055/pdata.h: ASCII C program text
include/linux/mfd/da9055/reg.h:   ASCII C program text

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/mfd/da9055/core.h  |    2 +-
 include/linux/mfd/da9055/pdata.h |    2 +-
 include/linux/mfd/da9055/reg.h   |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

--- a/include/linux/mfd/da9055/core.h
+++ b/include/linux/mfd/da9055/core.h
@@ -1,4 +1,4 @@
-/*
+/*
  * da9055 declarations for DA9055 PMICs.
  *
  * Copyright(c) 2012 Dialog Semiconductor Ltd.
--- a/include/linux/mfd/da9055/pdata.h
+++ b/include/linux/mfd/da9055/pdata.h
@@ -1,4 +1,4 @@
-/* Copyright (C) 2012 Dialog Semiconductor Ltd.
+/* Copyright (C) 2012 Dialog Semiconductor Ltd.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
--- a/include/linux/mfd/da9055/reg.h
+++ b/include/linux/mfd/da9055/reg.h
@@ -1,4 +1,4 @@
-/*
+/*
  * DA9055 declarations for DA9055 PMICs.
  *
  * Copyright(c) 2012 Dialog Semiconductor Ltd.

[ 054/221] ext4: fix memory leak in ext4_xattr_set_acl()s error path

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eugene Shatokhin <eugene.shatokhin@rosalab.ru>

commit 24ec19b0ae83a385ad9c55520716da671274b96c upstream.

In ext4_xattr_set_acl(), if ext4_journal_start() returns an error,
posix_acl_release() will not be called for 'acl' which may result in a
memory leak.

This patch fixes that.

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/acl.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/fs/ext4/acl.c
+++ b/fs/ext4/acl.c
@@ -423,8 +423,10 @@ ext4_xattr_set_acl(struct dentry *dentry
 
 retry:
 	handle = ext4_journal_start(inode, EXT4_DATA_TRANS_BLOCKS(inode->i_sb));
-	if (IS_ERR(handle))
-		return PTR_ERR(handle);
+	if (IS_ERR(handle)) {
+		error = PTR_ERR(handle);
+		goto release_and_out;
+	}
 	error = ext4_set_acl(handle, inode, type, acl);
 	ext4_journal_stop(handle);
 	if (error == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))

[ 055/221] ext4: fix possible use after free with metadata csum

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit aeb1e5d69a5be592e86a926be73efb38c55af404 upstream.

Commit fa77dcfafeaa introduces block bitmap checksum calculation into
ext4_new_inode() in the case that block group was uninitialized.
However we brelse() the bitmap buffer before we attempt to checksum it
so we have no guarantee that the buffer is still there.

Fix this by releasing the buffer after the possible checksum
computation.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/ialloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -762,7 +762,6 @@ got:
 
 		BUFFER_TRACE(block_bitmap_bh, "dirty block bitmap");
 		err = ext4_handle_dirty_metadata(handle, NULL, block_bitmap_bh);
-		brelse(block_bitmap_bh);
 
 		/* recheck and clear flag under lock if we still need to */
 		ext4_lock_group(sb, group);
@@ -775,6 +774,7 @@ got:
 			ext4_group_desc_csum_set(sb, group, gdp);
 		}
 		ext4_unlock_group(sb, group);
+		brelse(block_bitmap_bh);
 
 		if (err)
 			goto fail;

[ 056/221] mtd cs553x_nand: Initialise ecc.strength before nand_scan()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nathan Williams <nathan@traverse.com.au>

commit d1f3b65d2d6fdb4bf0edd4b67e86e191af48daee upstream.

Loading cs553x_nand with Hynix H27U1G8F2BTR NAND flash causes this bug:

kernel BUG at drivers/mtd/nand/nand_base.c:3345!
invalid opcode: 0000 [#1]
Modules linked in: cs553x_nand(+) vfat fat usb_storage ehci_hcd usbcore usb_comr
Pid: 436, comm: modprobe Not tainted 3.6.7 #1
EIP: 0060:[<c118d205>] EFLAGS: 00010296 CPU: 0
EIP is at nand_scan_tail+0x64c/0x69c
EAX: 00000034 EBX: cea6ed98 ECX: 00000000 EDX: 00000000
ESI: cea6ec00 EDI: cea6ec00 EBP: 20000000 ESP: cdd17e48
 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
CR0: 8005003b CR2: 0804e119 CR3: 0d850000 CR4: 00000090
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process modprobe (pid: 436, ti=cdd16000 task=cdd1c320 task.ti=cdd16000)
Stack:
 c12e962c c118f7ef 00000003 cea6ed98 d014b25c 20000000 fffff007 00000001
 00000000 cdd53b00 d014b000 c1001021 cdd53b00 d01493c0 cdd53b00 cdd53b00
 d01493c0 c1047f83 d014b4a0 00000000 cdd17f9c ce4be454 cdd17f48 cdd1c320
Call Trace:
 [<c118f7ef>] ? nand_scan+0x1b/0x4d
 [<d014b25c>] ? init_module+0x25c/0x2de [cs553x_nand]
 [<d014b000>] ? 0xd014afff
 [<c1001021>] ? do_one_initcall+0x21/0x111
 [<c1047f83>] ? sys_init_module+0xe4/0x1261
 [<c1031207>] ? task_work_run+0x36/0x43
 [<c1265ced>] ? syscall_call+0x7/0xb
Code: fa ff ff c7 86 d8 00 00 00 01 00 00 00 e9 5f fc ff ff 68 f8 26 2e c1 e8 a7
EIP: [<c118d205>] nand_scan_tail+0x64c/0x69c SS:ESP 0068:cdd17e48

Initialising ecc.strength before the call to nand_scan() fixes this.

Signed-off-by: Nathan Williams <nathan@traverse.com.au>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/cs553x_nand.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -237,6 +237,7 @@ static int __init cs553x_init_one(int cs
 	this->ecc.hwctl  = cs_enable_hwecc;
 	this->ecc.calculate = cs_calculate_ecc;
 	this->ecc.correct  = nand_correct_data;
+	this->ecc.strength = 1;
 
 	/* Enable the following for a flash based bad block table */
 	this->bbt_options = NAND_BBT_USE_FLASH;
@@ -247,8 +248,6 @@ static int __init cs553x_init_one(int cs
 		goto out_ior;
 	}
 
-	this->ecc.strength = 1;
-
 	new_mtd->name = kasprintf(GFP_KERNEL, "cs553x_nand_cs%d", cs);
 
 	cs553x_mtd[cs] = new_mtd;

[ 057/221] mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wolfram Sang <w.sang@pengutronix.de>

commit 6f2a6a52560ad8d85710aabd92b7a3239b3a6b07 upstream.

It could happen (1 out of 100 times) that NAND did not start up
correctly after warm rebooting, so the kernel could not find the UBI or
DMA timed out due to a stalled BCH. When resetting BCH together with
GPMI, the issue could not be observed anymore (after 10000+ reboots). We
probably need the consistent state already before sending any command to
NAND, even when no ECC is needed. I chose to keep the extra reset for
BCH when changing the flash layout to be on the safe side.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -166,6 +166,15 @@ int gpmi_init(struct gpmi_nand_data *thi
 	if (ret)
 		goto err_out;
 
+	/*
+	 * Reset BCH here, too. We got failures otherwise :(
+	 * See later BCH reset for explanation of MX23 handling
+	 */
+	ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
+	if (ret)
+		goto err_out;
+
+
 	/* Choose NAND mode. */
 	writel(BM_GPMI_CTRL1_GPMI_MODE, r->gpmi_regs + HW_GPMI_CTRL1_CLR);
 

[ 058/221] kbuild: Do not remove vmlinux when cleaning external module

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pawel Moll <pawel.moll@arm.com>

commit bd1ee804af8bdf2fd5131234330615f8aecbd9ed upstream.

Since commit 1f2bfbd00e466ff3489b2ca5cc75b1cccd14c123 "kbuild:
link of vmlinux moved to a script" make clean with M=<dir>
argument (so cleaning external module) removes vmlinux,
System.map and couple of other files from the *main* kernel
build directory! This not what was happening before and almost
certainly not what one would expect.

This patch moves makes the clean target of the script called
only when !KBUILD_EXTMOD.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/Makefile
+++ b/Makefile
@@ -1021,11 +1021,14 @@ clean: rm-dirs  := $(CLEAN_DIRS)
 clean: rm-files := $(CLEAN_FILES)
 clean-dirs      := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation samples)
 
-PHONY += $(clean-dirs) clean archclean
+PHONY += $(clean-dirs) clean archclean vmlinuxclean
 $(clean-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
-clean: archclean
+vmlinuxclean:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
+
+clean: archclean vmlinuxclean
 
 # mrproper - Delete all generated files, including .config
 #
@@ -1252,7 +1255,6 @@ scripts: ;
 endif # KBUILD_EXTMOD
 
 clean: $(clean-dirs)
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
 	$(call cmd,rmdirs)
 	$(call cmd,rmfiles)
 	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \

[ 059/221] OMAP: board-files: fix i2c_bus for tfp410

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

commit ca2e16faa7378878c1522a7c1b6c38211de3331d upstream.

The i2c handling in tfp410 driver, which handles converting parallel RGB
to DVI, was changed in 958f2717b84e88bf833d996997fda8f73276f2af
(OMAPDSS: TFP410: pdata rewrite). The patch changed what value the
driver considers as invalid/undefined.  Before the patch, 0 was the
invalid value, but as 0 is a valid bus number, the patch changed this to
-1.

However, the fact was missed that many board files do not define the bus
number at all, thus it's left to 0. This causes the driver to fail to
get the i2c bus, exiting from the driver's probe with an error, meaning
that the DVI output does not work for those boards.

This patch fixes the issue by changing the i2c_bus number field in the
driver's platform data from u16 to int, and setting the bus number to -1
in the board files for the boards that did not define the bus. The
exception is devkit8000, for which the bus is set to 1, which is the
correct bus for that board.

The bug exists in v3.5+ kernels.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Thomas Weber <thomas@tomweber.eu>
Cc: Thomas Weber <thomas@tomweber.eu>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-omap2/board-3430sdp.c      |    1 +
 arch/arm/mach-omap2/board-am3517evm.c    |    1 +
 arch/arm/mach-omap2/board-cm-t35.c       |    1 +
 arch/arm/mach-omap2/board-devkit8000.c   |    1 +
 arch/arm/mach-omap2/board-omap3evm.c     |    1 +
 arch/arm/mach-omap2/board-omap3stalker.c |    1 +
 include/video/omap-panel-tfp410.h        |    2 +-
 7 files changed, 7 insertions(+), 1 deletion(-)

--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -157,6 +157,7 @@ static struct omap_dss_device sdp3430_lc
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= -1,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device sdp3430_dvi_device = {
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -208,6 +208,7 @@ static struct omap_dss_device am3517_evm
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= -1,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device am3517_evm_dvi_device = {
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -243,6 +243,7 @@ static struct omap_dss_device cm_t35_lcd
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= CM_T35_DVI_EN_GPIO,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device cm_t35_dvi_device = {
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -139,6 +139,7 @@ static struct omap_dss_device devkit8000
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= -1,
+	.i2c_bus_num		= 1,
 };
 
 static struct omap_dss_device devkit8000_dvi_device = {
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -236,6 +236,7 @@ static struct omap_dss_device omap3_evm_
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= OMAP3EVM_DVI_PANEL_EN_GPIO,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device omap3_evm_dvi_device = {
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -119,6 +119,7 @@ static struct omap_dss_device omap3_stal
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= DSS_ENABLE_GPIO,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device omap3_stalker_dvi_device = {
--- a/include/video/omap-panel-tfp410.h
+++ b/include/video/omap-panel-tfp410.h
@@ -28,7 +28,7 @@ struct omap_dss_device;
  * @power_down_gpio: gpio number for PD pin (or -1 if not available)
  */
 struct tfp410_platform_data {
-	u16 i2c_bus_num;
+	int i2c_bus_num;
 	int power_down_gpio;
 };
 

[ 060/221] SUNRPC: Fix validity issues with rpc_pipefs sb->s_fs_info

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit 642fe4d00db56d65060ce2fd4c105884414acb16 upstream.

rpc_kill_sb() must defer calling put_net() until after the notifier
has been called, since most (all?) of the notifier callbacks assume
that sb->s_fs_info points to a valid net namespace. It also must not
call put_net() if the call to rpc_fill_super was unsuccessful.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=48421

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/rpc_pipe.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -1152,14 +1152,19 @@ static void rpc_kill_sb(struct super_blo
 	struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
 
 	mutex_lock(&sn->pipefs_sb_lock);
+	if (sn->pipefs_sb != sb) {
+		mutex_unlock(&sn->pipefs_sb_lock);
+		goto out;
+	}
 	sn->pipefs_sb = NULL;
 	mutex_unlock(&sn->pipefs_sb_lock);
-	put_net(net);
 	dprintk("RPC:       sending pipefs UMOUNT notification for net %p%s\n",
 		net, NET_NAME(net));
 	blocking_notifier_call_chain(&rpc_pipefs_notifier_list,
 					   RPC_PIPEFS_UMOUNT,
 					   sb);
+	put_net(net);
+out:
 	kill_litter_super(sb);
 }
 

[ 061/221] SUNRPC: continue run over clients list on PipeFS event instead of break

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislav Kinsbursky <skinsbursky@parallels.com>

commit cd6c5968582a273561464fe6b1e8cc8214be02df upstream.

There are SUNRPC clients, which program doesn't have pipe_dir_name. These
clients can be skipped on PipeFS events, because nothing have to be created or
destroyed. But instead of breaking in case of such a client was found, search
for suitable client over clients list have to be continued. Otherwise some
clients could not be covered by PipeFS event handler.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/clnt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -234,7 +234,7 @@ static struct rpc_clnt *rpc_get_client_f
 	spin_lock(&sn->rpc_client_lock);
 	list_for_each_entry(clnt, &sn->all_clients, cl_clients) {
 		if (clnt->cl_program->pipe_dir_name == NULL)
-			break;
+			continue;
 		if (rpc_clnt_skip_event(clnt, event))
 			continue;
 		if (atomic_inc_not_zero(&clnt->cl_count) == 0)

[ 062/221] svcrpc: Revert "sunrpc/cache.h: replace simple_strtoul"

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <bfields@redhat.com>

commit 621eb19ce1ec216e03ad354cb0c4061736b2a436 upstream.

Commit bbf43dc888833ac0539e437dbaeb28bfd4fbab9f "sunrpc/cache.h: replace
simple_strtoul" introduced new range-checking which could cause get_int
to fail on unsigned integers too large to be represented as an int.

We could parse them as unsigned instead--but it turns out svcgssd is
actually passing down "-1" in some cases.  Which is perhaps stupid, but
there's nothing we can do about it now.

So just revert back to the previous "sloppy" behavior that accepts
either representation.

Reported-by: Sven Geggus <lists@fuchsschwanzdomain.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/sunrpc/cache.h |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/include/linux/sunrpc/cache.h
+++ b/include/linux/sunrpc/cache.h
@@ -217,6 +217,8 @@ extern int qword_get(char **bpp, char *d
 static inline int get_int(char **bpp, int *anint)
 {
 	char buf[50];
+	char *ep;
+	int rv;
 	int len = qword_get(bpp, buf, sizeof(buf));
 
 	if (len < 0)
@@ -224,9 +226,11 @@ static inline int get_int(char **bpp, in
 	if (len == 0)
 		return -ENOENT;
 
-	if (kstrtoint(buf, 0, anint))
+	rv = simple_strtol(buf, &ep, 0);
+	if (*ep)
 		return -EINVAL;
 
+	*anint = rv;
 	return 0;
 }
 

[ 063/221] SUNRPC: Ensure that we free the rpc_task after cleanups are done

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit c6567ed1402c55e19b012e66a8398baec2a726f3 upstream.

This patch ensures that we free the rpc_task after the cleanup callbacks
are done in order to avoid a deadlock problem that can be triggered if
the callback needs to wait for another workqueue item to complete.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Weston Andros Adamson <dros@netapp.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/sched.c |   27 +++++++++++++++++++++++----
 1 file changed, 23 insertions(+), 4 deletions(-)

--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -919,16 +919,35 @@ struct rpc_task *rpc_new_task(const stru
 	return task;
 }
 
+/*
+ * rpc_free_task - release rpc task and perform cleanups
+ *
+ * Note that we free up the rpc_task _after_ rpc_release_calldata()
+ * in order to work around a workqueue dependency issue.
+ *
+ * Tejun Heo states:
+ * "Workqueue currently considers two work items to be the same if they're
+ * on the same address and won't execute them concurrently - ie. it
+ * makes a work item which is queued again while being executed wait
+ * for the previous execution to complete.
+ *
+ * If a work function frees the work item, and then waits for an event
+ * which should be performed by another work item and *that* work item
+ * recycles the freed work item, it can create a false dependency loop.
+ * There really is no reliable way to detect this short of verifying
+ * every memory free."
+ *
+ */
 static void rpc_free_task(struct rpc_task *task)
 {
-	const struct rpc_call_ops *tk_ops = task->tk_ops;
-	void *calldata = task->tk_calldata;
+	unsigned short tk_flags = task->tk_flags;
 
-	if (task->tk_flags & RPC_TASK_DYNAMIC) {
+	rpc_release_calldata(task->tk_ops, task->tk_calldata);
+
+	if (tk_flags & RPC_TASK_DYNAMIC) {
 		dprintk("RPC: %5u freeing task\n", task->tk_pid);
 		mempool_free(task, rpc_task_mempool);
 	}
-	rpc_release_calldata(tk_ops, calldata);
 }
 
 static void rpc_async_release(struct work_struct *work)

[ 064/221] SUNRPC: Ensure we release the socket write lock if the rpc_task exits early

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit 87ed50036b866db2ec2ba16b2a7aec4a2b0b7c39 upstream.

If the rpc_task exits while holding the socket write lock before it has
allocated an rpc slot, then the usual mechanism for releasing the write
lock in xprt_release() is defeated.

The problem occurs if the call to xprt_lock_write() initially fails, so
that the rpc_task is put on the xprt->sending wait queue. If the task
exits after being assigned the lock by __xprt_lock_write_func, but
before it has retried the call to xprt_lock_and_alloc_slot(), then
it calls xprt_release() while holding the write lock, but will
immediately exit due to the test for task->tk_rqstp != NULL.

Reported-by: Chris Perl <chris.perl@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/sched.c |    3 +--
 net/sunrpc/xprt.c  |   12 ++++++++++--
 2 files changed, 11 insertions(+), 4 deletions(-)

--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -957,8 +957,7 @@ static void rpc_async_release(struct wor
 
 static void rpc_release_resources_task(struct rpc_task *task)
 {
-	if (task->tk_rqstp)
-		xprt_release(task);
+	xprt_release(task);
 	if (task->tk_msg.rpc_cred) {
 		put_rpccred(task->tk_msg.rpc_cred);
 		task->tk_msg.rpc_cred = NULL;
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -1136,10 +1136,18 @@ static void xprt_request_init(struct rpc
 void xprt_release(struct rpc_task *task)
 {
 	struct rpc_xprt	*xprt;
-	struct rpc_rqst	*req;
+	struct rpc_rqst	*req = task->tk_rqstp;
 
-	if (!(req = task->tk_rqstp))
+	if (req == NULL) {
+		if (task->tk_client) {
+			rcu_read_lock();
+			xprt = rcu_dereference(task->tk_client->cl_xprt);
+			if (xprt->snd_task == task)
+				xprt_release_write(xprt, task);
+			rcu_read_unlock();
+		}
 		return;
+	}
 
 	xprt = req->rq_xprt;
 	if (task->tk_ops->rpc_count_stats != NULL)

[ 065/221] jffs2: hold erase_completion_lock on exit

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

commit 2cbba75a56ea78e6876b4e2547a882f10b3fe72b upstream.

Users of jffs2_do_reserve_space() expect they still held
erase_completion_lock after call to it. But there is a path
where jffs2_do_reserve_space() leaves erase_completion_lock unlocked.
The patch fixes it.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/jffs2/nodemgmt.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/fs/jffs2/nodemgmt.c
+++ b/fs/jffs2/nodemgmt.c
@@ -417,14 +417,16 @@ static int jffs2_do_reserve_space(struct
 			spin_unlock(&c->erase_completion_lock);
 
 			ret = jffs2_prealloc_raw_node_refs(c, jeb, 1);
-			if (ret)
-				return ret;
+
 			/* Just lock it again and continue. Nothing much can change because
 			   we hold c->alloc_sem anyway. In fact, it's not entirely clear why
 			   we hold c->erase_completion_lock in the majority of this function...
 			   but that's a question for another (more caffeine-rich) day. */
 			spin_lock(&c->erase_completion_lock);
 
+			if (ret)
+				return ret;
+
 			waste = jeb->free_size;
 			jffs2_link_node_ref(c, jeb,
 					    (jeb->offset + c->sector_size - waste) | REF_OBSOLETE,

[ 066/221] i2400m: add Intel 6150 device IDs

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dcbw@redhat.com>

commit 999a7c5776a0ed2133645fa7e008bec05bda9254 upstream.

Add device IDs for WiMAX function of Intel 6150 cards.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wimax/i2400m/i2400m-usb.h |    3 +++
 drivers/net/wimax/i2400m/usb.c        |    6 ++++++
 2 files changed, 9 insertions(+)

--- a/drivers/net/wimax/i2400m/i2400m-usb.h
+++ b/drivers/net/wimax/i2400m/i2400m-usb.h
@@ -152,6 +152,9 @@ enum {
 	/* Device IDs */
 	USB_DEVICE_ID_I6050 = 0x0186,
 	USB_DEVICE_ID_I6050_2 = 0x0188,
+	USB_DEVICE_ID_I6150 = 0x07d6,
+	USB_DEVICE_ID_I6150_2 = 0x07d7,
+	USB_DEVICE_ID_I6150_3 = 0x07d9,
 	USB_DEVICE_ID_I6250 = 0x0187,
 };
 
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -510,6 +510,9 @@ int i2400mu_probe(struct usb_interface *
 	switch (id->idProduct) {
 	case USB_DEVICE_ID_I6050:
 	case USB_DEVICE_ID_I6050_2:
+	case USB_DEVICE_ID_I6150:
+	case USB_DEVICE_ID_I6150_2:
+	case USB_DEVICE_ID_I6150_3:
 	case USB_DEVICE_ID_I6250:
 		i2400mu->i6050 = 1;
 		break;
@@ -759,6 +762,9 @@ static
 struct usb_device_id i2400mu_id_table[] = {
 	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) },
 	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050_2) },
+	{ USB_DEVICE(0x8087, USB_DEVICE_ID_I6150) },
+	{ USB_DEVICE(0x8087, USB_DEVICE_ID_I6150_2) },
+	{ USB_DEVICE(0x8087, USB_DEVICE_ID_I6150_3) },
 	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6250) },
 	{ USB_DEVICE(0x8086, 0x0181) },
 	{ USB_DEVICE(0x8086, 0x1403) },

[ 067/221] intel-iommu: Free old page tables before creating superpage

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Woodhouse, David" <david.woodhouse@intel.com>

commit 6491d4d02893d9787ba67279595990217177b351 upstream.

The dma_pte_free_pagetable() function will only free a page table page
if it is asked to free the *entire* 2MiB range that it covers. So if a
page table page was used for one or more small mappings, it's likely to
end up still present in the page tables... but with no valid PTEs.

This was fine when we'd only be repopulating it with 4KiB PTEs anyway
but the same virtual address range can end up being reused for a
*large-page* mapping. And in that case were were trying to insert the
large page into the second-level page table, and getting a complaint
from the sanity check in __domain_mapping() because there was already a
corresponding entry. This was *relatively* harmless; it led to a memory
leak of the old page table page, but no other ill-effects.

Fix it by calling dma_pte_clear_range (hopefully redundant) and
dma_pte_free_pagetable() before setting up the new large page.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Ravi Murty <Ravi.Murty@intel.com>
Tested-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/intel-iommu.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -1827,10 +1827,17 @@ static int __domain_mapping(struct dmar_
 			if (!pte)
 				return -ENOMEM;
 			/* It is large page*/
-			if (largepage_lvl > 1)
+			if (largepage_lvl > 1) {
 				pteval |= DMA_PTE_LARGE_PAGE;
-			else
+				/* Ensure that old small page tables are removed to make room
+				   for superpage, if they exist. */
+				dma_pte_clear_range(domain, iov_pfn,
+						    iov_pfn + lvl_to_nr_pages(largepage_lvl) - 1);
+				dma_pte_free_pagetable(domain, iov_pfn,
+						       iov_pfn + lvl_to_nr_pages(largepage_lvl) - 1);
+			} else {
 				pteval &= ~(uint64_t)DMA_PTE_LARGE_PAGE;
+			}
 
 		}
 		/* We don't need lock here, nobody else

[ 068/221] drm/radeon: stop page faults from hanging the system (v2)

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian König <deathsimple@vodafone.de>

commit ae133a1129790ec288b429b5f08ab4701633844a upstream.

Redirect invalid memory accesses to the default page
instead of locking up the memory controller. Also
enable the invalid memory access interrupts and
start spamming system log with it.

v2 (agd5f): fix up against 2 level PT changes

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/evergreen.c  |   10 ++++++++++
 drivers/gpu/drm/radeon/evergreend.h |    3 +++
 drivers/gpu/drm/radeon/ni.c         |   16 +++++++++++++---
 drivers/gpu/drm/radeon/nid.h        |   11 +++++++++++
 drivers/gpu/drm/radeon/si.c         |   25 +++++++++++++++++++++++--
 drivers/gpu/drm/radeon/sid.h        |   14 ++++++++++++++
 6 files changed, 74 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -3093,6 +3093,16 @@ restart_ih:
 				break;
 			}
 			break;
+		case 146:
+		case 147:
+			dev_err(rdev->dev, "GPU fault detected: %d 0x%08x\n", src_id, src_data);
+			dev_err(rdev->dev, "  VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x%08X\n",
+				RREG32(VM_CONTEXT1_PROTECTION_FAULT_ADDR));
+			dev_err(rdev->dev, "  VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n",
+				RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS));
+			/* reset addr and status */
+			WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1);
+			break;
 		case 176: /* CP_INT in ring buffer */
 		case 177: /* CP_INT in IB1 */
 		case 178: /* CP_INT in IB2 */
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -651,6 +651,7 @@
 #define		PAGE_TABLE_DEPTH(x)				(((x) & 3) << 1)
 #define		RANGE_PROTECTION_FAULT_ENABLE_DEFAULT		(1 << 4)
 #define VM_CONTEXT1_CNTL				0x1414
+#define VM_CONTEXT1_CNTL2				0x1434
 #define	VM_CONTEXT0_PAGE_TABLE_BASE_ADDR		0x153C
 #define	VM_CONTEXT0_PAGE_TABLE_END_ADDR			0x157C
 #define	VM_CONTEXT0_PAGE_TABLE_START_ADDR		0x155C
@@ -672,6 +673,8 @@
 #define		CACHE_UPDATE_MODE(x)				((x) << 6)
 #define	VM_L2_STATUS					0x140C
 #define		L2_BUSY						(1 << 0)
+#define	VM_CONTEXT1_PROTECTION_FAULT_ADDR		0x14FC
+#define	VM_CONTEXT1_PROTECTION_FAULT_STATUS		0x14DC
 
 #define	WAIT_UNTIL					0x8040
 
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -784,10 +784,20 @@ static int cayman_pcie_gart_enable(struc
 	/* enable context1-7 */
 	WREG32(VM_CONTEXT1_PROTECTION_FAULT_DEFAULT_ADDR,
 	       (u32)(rdev->dummy_page.addr >> 12));
-	WREG32(VM_CONTEXT1_CNTL2, 0);
-	WREG32(VM_CONTEXT1_CNTL, 0);
+	WREG32(VM_CONTEXT1_CNTL2, 4);
 	WREG32(VM_CONTEXT1_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(1) |
-				RANGE_PROTECTION_FAULT_ENABLE_DEFAULT);
+				RANGE_PROTECTION_FAULT_ENABLE_INTERRUPT |
+				RANGE_PROTECTION_FAULT_ENABLE_DEFAULT |
+				DUMMY_PAGE_PROTECTION_FAULT_ENABLE_INTERRUPT |
+				DUMMY_PAGE_PROTECTION_FAULT_ENABLE_DEFAULT |
+				PDE0_PROTECTION_FAULT_ENABLE_INTERRUPT |
+				PDE0_PROTECTION_FAULT_ENABLE_DEFAULT |
+				VALID_PROTECTION_FAULT_ENABLE_INTERRUPT |
+				VALID_PROTECTION_FAULT_ENABLE_DEFAULT |
+				READ_PROTECTION_FAULT_ENABLE_INTERRUPT |
+				READ_PROTECTION_FAULT_ENABLE_DEFAULT |
+				WRITE_PROTECTION_FAULT_ENABLE_INTERRUPT |
+				WRITE_PROTECTION_FAULT_ENABLE_DEFAULT);
 
 	cayman_pcie_gart_tlb_flush(rdev);
 	DRM_INFO("PCIE GART of %uM enabled (table at 0x%016llX).\n",
--- a/drivers/gpu/drm/radeon/nid.h
+++ b/drivers/gpu/drm/radeon/nid.h
@@ -80,7 +80,18 @@
 #define VM_CONTEXT0_CNTL				0x1410
 #define		ENABLE_CONTEXT					(1 << 0)
 #define		PAGE_TABLE_DEPTH(x)				(((x) & 3) << 1)
+#define		RANGE_PROTECTION_FAULT_ENABLE_INTERRUPT		(1 << 3)
 #define		RANGE_PROTECTION_FAULT_ENABLE_DEFAULT		(1 << 4)
+#define		DUMMY_PAGE_PROTECTION_FAULT_ENABLE_INTERRUPT	(1 << 6)
+#define		DUMMY_PAGE_PROTECTION_FAULT_ENABLE_DEFAULT	(1 << 7)
+#define		PDE0_PROTECTION_FAULT_ENABLE_INTERRUPT		(1 << 9)
+#define		PDE0_PROTECTION_FAULT_ENABLE_DEFAULT		(1 << 10)
+#define		VALID_PROTECTION_FAULT_ENABLE_INTERRUPT		(1 << 12)
+#define		VALID_PROTECTION_FAULT_ENABLE_DEFAULT		(1 << 13)
+#define		READ_PROTECTION_FAULT_ENABLE_INTERRUPT		(1 << 15)
+#define		READ_PROTECTION_FAULT_ENABLE_DEFAULT		(1 << 16)
+#define		WRITE_PROTECTION_FAULT_ENABLE_INTERRUPT		(1 << 18)
+#define		WRITE_PROTECTION_FAULT_ENABLE_DEFAULT		(1 << 19)
 #define VM_CONTEXT1_CNTL				0x1414
 #define VM_CONTEXT0_CNTL2				0x1430
 #define VM_CONTEXT1_CNTL2				0x1434
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -2426,9 +2426,20 @@ static int si_pcie_gart_enable(struct ra
 	/* enable context1-15 */
 	WREG32(VM_CONTEXT1_PROTECTION_FAULT_DEFAULT_ADDR,
 	       (u32)(rdev->dummy_page.addr >> 12));
-	WREG32(VM_CONTEXT1_CNTL2, 0);
+	WREG32(VM_CONTEXT1_CNTL2, 4);
 	WREG32(VM_CONTEXT1_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(1) |
-				RANGE_PROTECTION_FAULT_ENABLE_DEFAULT);
+				RANGE_PROTECTION_FAULT_ENABLE_INTERRUPT |
+				RANGE_PROTECTION_FAULT_ENABLE_DEFAULT |
+				DUMMY_PAGE_PROTECTION_FAULT_ENABLE_INTERRUPT |
+				DUMMY_PAGE_PROTECTION_FAULT_ENABLE_DEFAULT |
+				PDE0_PROTECTION_FAULT_ENABLE_INTERRUPT |
+				PDE0_PROTECTION_FAULT_ENABLE_DEFAULT |
+				VALID_PROTECTION_FAULT_ENABLE_INTERRUPT |
+				VALID_PROTECTION_FAULT_ENABLE_DEFAULT |
+				READ_PROTECTION_FAULT_ENABLE_INTERRUPT |
+				READ_PROTECTION_FAULT_ENABLE_DEFAULT |
+				WRITE_PROTECTION_FAULT_ENABLE_INTERRUPT |
+				WRITE_PROTECTION_FAULT_ENABLE_DEFAULT);
 
 	si_pcie_gart_tlb_flush(rdev);
 	DRM_INFO("PCIE GART of %uM enabled (table at 0x%016llX).\n",
@@ -3684,6 +3695,16 @@ restart_ih:
 				break;
 			}
 			break;
+		case 146:
+		case 147:
+			dev_err(rdev->dev, "GPU fault detected: %d 0x%08x\n", src_id, src_data);
+			dev_err(rdev->dev, "  VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x%08X\n",
+				RREG32(VM_CONTEXT1_PROTECTION_FAULT_ADDR));
+			dev_err(rdev->dev, "  VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n",
+				RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS));
+			/* reset addr and status */
+			WREG32_P(VM_CONTEXT1_CNTL2, 1, ~1);
+			break;
 		case 176: /* RINGID0 CP_INT */
 			radeon_fence_process(rdev, RADEON_RING_TYPE_GFX_INDEX);
 			break;
--- a/drivers/gpu/drm/radeon/sid.h
+++ b/drivers/gpu/drm/radeon/sid.h
@@ -91,7 +91,18 @@
 #define VM_CONTEXT0_CNTL				0x1410
 #define		ENABLE_CONTEXT					(1 << 0)
 #define		PAGE_TABLE_DEPTH(x)				(((x) & 3) << 1)
+#define		RANGE_PROTECTION_FAULT_ENABLE_INTERRUPT		(1 << 3)
 #define		RANGE_PROTECTION_FAULT_ENABLE_DEFAULT		(1 << 4)
+#define		DUMMY_PAGE_PROTECTION_FAULT_ENABLE_INTERRUPT	(1 << 6)
+#define		DUMMY_PAGE_PROTECTION_FAULT_ENABLE_DEFAULT	(1 << 7)
+#define		PDE0_PROTECTION_FAULT_ENABLE_INTERRUPT		(1 << 9)
+#define		PDE0_PROTECTION_FAULT_ENABLE_DEFAULT		(1 << 10)
+#define		VALID_PROTECTION_FAULT_ENABLE_INTERRUPT		(1 << 12)
+#define		VALID_PROTECTION_FAULT_ENABLE_DEFAULT		(1 << 13)
+#define		READ_PROTECTION_FAULT_ENABLE_INTERRUPT		(1 << 15)
+#define		READ_PROTECTION_FAULT_ENABLE_DEFAULT		(1 << 16)
+#define		WRITE_PROTECTION_FAULT_ENABLE_INTERRUPT		(1 << 18)
+#define		WRITE_PROTECTION_FAULT_ENABLE_DEFAULT		(1 << 19)
 #define VM_CONTEXT1_CNTL				0x1414
 #define VM_CONTEXT0_CNTL2				0x1430
 #define VM_CONTEXT1_CNTL2				0x1434
@@ -104,6 +115,9 @@
 #define	VM_CONTEXT14_PAGE_TABLE_BASE_ADDR		0x1450
 #define	VM_CONTEXT15_PAGE_TABLE_BASE_ADDR		0x1454
 
+#define	VM_CONTEXT1_PROTECTION_FAULT_ADDR		0x14FC
+#define	VM_CONTEXT1_PROTECTION_FAULT_STATUS		0x14DC
+
 #define VM_INVALIDATE_REQUEST				0x1478
 #define VM_INVALIDATE_RESPONSE				0x147c
 

[ 069/221] drm/radeon/dce32+: use fractional fb dividers for high clocks

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit a02dc74b317d78298cb0587b9b1f6f741fd5c139 upstream.

Fixes flickering with some high res montiors.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/atombios_crtc.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -561,6 +561,8 @@ static u32 atombios_adjust_pll(struct dr
 		/* use frac fb div on APUs */
 		if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE61(rdev))
 			radeon_crtc->pll_flags |= RADEON_PLL_USE_FRAC_FB_DIV;
+		if (ASIC_IS_DCE32(rdev) && mode->clock > 165000)
+			radeon_crtc->pll_flags |= RADEON_PLL_USE_FRAC_FB_DIV;
 	} else {
 		radeon_crtc->pll_flags |= RADEON_PLL_LEGACY;
 

[ 070/221] drm/radeon: fix eDP clk and lane setup for scaled modes

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 93927f9c1db5f55085457e820f0631064c7bfa34 upstream.

Need to use the adjusted mode since we are sending native
timing and using the scaler for non-native modes.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/atombios_encoders.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -340,7 +340,7 @@ static bool radeon_atom_mode_fixup(struc
 	    ((radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) ||
 	     (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE))) {
 		struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
-		radeon_dp_set_link_config(connector, mode);
+		radeon_dp_set_link_config(connector, adjusted_mode);
 	}
 
 	return true;

[ 071/221] drm/radeon: fix amd afusion gpu setup aka sumo v2

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Glisse <jglisse@redhat.com>

commit bd25f0783dc3fb72e1e2779c2b99b2d34b67fa8a upstream.

Set the proper number of tile pipe that should be a multiple of
pipe depending on the number of se engine.

Fix:
https://bugs.freedesktop.org/show_bug.cgi?id=56405
https://bugs.freedesktop.org/show_bug.cgi?id=56720

v2: Don't change sumo2

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/evergreen.c  |    8 ++++----
 drivers/gpu/drm/radeon/evergreend.h |    2 ++
 2 files changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1821,7 +1821,7 @@ static void evergreen_gpu_init(struct ra
 	case CHIP_SUMO:
 		rdev->config.evergreen.num_ses = 1;
 		rdev->config.evergreen.max_pipes = 4;
-		rdev->config.evergreen.max_tile_pipes = 2;
+		rdev->config.evergreen.max_tile_pipes = 4;
 		if (rdev->pdev->device == 0x9648)
 			rdev->config.evergreen.max_simds = 3;
 		else if ((rdev->pdev->device == 0x9647) ||
@@ -1844,7 +1844,7 @@ static void evergreen_gpu_init(struct ra
 		rdev->config.evergreen.sc_prim_fifo_size = 0x40;
 		rdev->config.evergreen.sc_hiz_tile_fifo_size = 0x30;
 		rdev->config.evergreen.sc_earlyz_tile_fifo_size = 0x130;
-		gb_addr_config = REDWOOD_GB_ADDR_CONFIG_GOLDEN;
+		gb_addr_config = SUMO_GB_ADDR_CONFIG_GOLDEN;
 		break;
 	case CHIP_SUMO2:
 		rdev->config.evergreen.num_ses = 1;
@@ -1866,7 +1866,7 @@ static void evergreen_gpu_init(struct ra
 		rdev->config.evergreen.sc_prim_fifo_size = 0x40;
 		rdev->config.evergreen.sc_hiz_tile_fifo_size = 0x30;
 		rdev->config.evergreen.sc_earlyz_tile_fifo_size = 0x130;
-		gb_addr_config = REDWOOD_GB_ADDR_CONFIG_GOLDEN;
+		gb_addr_config = SUMO2_GB_ADDR_CONFIG_GOLDEN;
 		break;
 	case CHIP_BARTS:
 		rdev->config.evergreen.num_ses = 2;
@@ -1914,7 +1914,7 @@ static void evergreen_gpu_init(struct ra
 		break;
 	case CHIP_CAICOS:
 		rdev->config.evergreen.num_ses = 1;
-		rdev->config.evergreen.max_pipes = 4;
+		rdev->config.evergreen.max_pipes = 2;
 		rdev->config.evergreen.max_tile_pipes = 2;
 		rdev->config.evergreen.max_simds = 2;
 		rdev->config.evergreen.max_backends = 1 * rdev->config.evergreen.num_ses;
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -45,6 +45,8 @@
 #define TURKS_GB_ADDR_CONFIG_GOLDEN          0x02010002
 #define CEDAR_GB_ADDR_CONFIG_GOLDEN          0x02010001
 #define CAICOS_GB_ADDR_CONFIG_GOLDEN         0x02010001
+#define SUMO_GB_ADDR_CONFIG_GOLDEN           0x02010002
+#define SUMO2_GB_ADDR_CONFIG_GOLDEN          0x02010002
 
 /* Registers */
 

[ 072/221] drm/radeon: restore modeset late in GPU reset path

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Glisse <jglisse@redhat.com>

commit d3493574e267c203836bfdcb9c58d8af46fc0da1 upstream.

Modeset path seems to conflict sometimes with the memory management
leading to kernel deadlock. This move modesetting reset after GPU
acceleration reset.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_device.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -1337,7 +1337,6 @@ retry:
 	}
 
 	radeon_restore_bios_scratch_regs(rdev);
-	drm_helper_resume_force_mode(rdev->ddev);
 
 	if (!r) {
 		for (i = 0; i < RADEON_NUM_RINGS; ++i) {
@@ -1362,6 +1361,8 @@ retry:
 		}
 	}
 
+	drm_helper_resume_force_mode(rdev->ddev);
+
 	ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched);
 	if (r) {
 		/* bad news, how to tell it to userspace ? */

[ 073/221] drm/radeon: dont leave fence blocked process on failed GPU reset

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Glisse <jglisse@redhat.com>

commit 76903b96adbfbb38b049765add21e02e44c387a5 upstream.

Force all fence to signal if GPU reset failed so no process get stuck
on waiting fence.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon.h        |    1 +
 drivers/gpu/drm/radeon/radeon_device.c |    1 +
 drivers/gpu/drm/radeon/radeon_fence.c  |   19 +++++++++++++++++++
 3 files changed, 21 insertions(+)

--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -220,6 +220,7 @@ struct radeon_fence {
 int radeon_fence_driver_start_ring(struct radeon_device *rdev, int ring);
 int radeon_fence_driver_init(struct radeon_device *rdev);
 void radeon_fence_driver_fini(struct radeon_device *rdev);
+void radeon_fence_driver_force_completion(struct radeon_device *rdev);
 int radeon_fence_emit(struct radeon_device *rdev, struct radeon_fence **fence, int ring);
 void radeon_fence_process(struct radeon_device *rdev, int ring);
 bool radeon_fence_signaled(struct radeon_fence *fence);
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -1356,6 +1356,7 @@ retry:
 			}
 		}
 	} else {
+		radeon_fence_driver_force_completion(rdev);
 		for (i = 0; i < RADEON_NUM_RINGS; ++i) {
 			kfree(ring_data[i]);
 		}
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -868,6 +868,25 @@ void radeon_fence_driver_fini(struct rad
 	mutex_unlock(&rdev->ring_lock);
 }
 
+/**
+ * radeon_fence_driver_force_completion - force all fence waiter to complete
+ *
+ * @rdev: radeon device pointer
+ *
+ * In case of GPU reset failure make sure no process keep waiting on fence
+ * that will never complete.
+ */
+void radeon_fence_driver_force_completion(struct radeon_device *rdev)
+{
+	int ring;
+
+	for (ring = 0; ring < RADEON_NUM_RINGS; ring++) {
+		if (!rdev->fence_drv[ring].initialized)
+			continue;
+		radeon_fence_write(rdev, rdev->fence_drv[ring].sync_seq[ring], ring);
+	}
+}
+
 
 /*
  * Fence debugfs

[ 074/221] drm/radeon: avoid deadlock in pm path when waiting for fence

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Glisse <jglisse@redhat.com>

commit 5f8f635edd8ad5a6416bff4c5ff486500357f473 upstream.

radeon_fence_wait_empty_locked should not trigger GPU reset as no
place where it's call from would benefit from such thing and it
actually lead to a kernel deadlock in case the reset is triggered
from pm codepath. Instead force ring completion in place where it
makes sense or return early in others.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon.h        |    2 +-
 drivers/gpu/drm/radeon/radeon_device.c |   13 +++++++++++--
 drivers/gpu/drm/radeon/radeon_fence.c  |   30 ++++++++++++++----------------
 drivers/gpu/drm/radeon/radeon_pm.c     |   15 ++++++++++++---
 4 files changed, 38 insertions(+), 22 deletions(-)

--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -226,7 +226,7 @@ void radeon_fence_process(struct radeon_
 bool radeon_fence_signaled(struct radeon_fence *fence);
 int radeon_fence_wait(struct radeon_fence *fence, bool interruptible);
 int radeon_fence_wait_next_locked(struct radeon_device *rdev, int ring);
-void radeon_fence_wait_empty_locked(struct radeon_device *rdev, int ring);
+int radeon_fence_wait_empty_locked(struct radeon_device *rdev, int ring);
 int radeon_fence_wait_any(struct radeon_device *rdev,
 			  struct radeon_fence **fences,
 			  bool intr);
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -1163,6 +1163,7 @@ int radeon_suspend_kms(struct drm_device
 	struct drm_crtc *crtc;
 	struct drm_connector *connector;
 	int i, r;
+	bool force_completion = false;
 
 	if (dev == NULL || dev->dev_private == NULL) {
 		return -ENODEV;
@@ -1205,8 +1206,16 @@ int radeon_suspend_kms(struct drm_device
 
 	mutex_lock(&rdev->ring_lock);
 	/* wait for gpu to finish processing current batch */
-	for (i = 0; i < RADEON_NUM_RINGS; i++)
-		radeon_fence_wait_empty_locked(rdev, i);
+	for (i = 0; i < RADEON_NUM_RINGS; i++) {
+		r = radeon_fence_wait_empty_locked(rdev, i);
+		if (r) {
+			/* delay GPU reset to resume */
+			force_completion = true;
+		}
+	}
+	if (force_completion) {
+		radeon_fence_driver_force_completion(rdev);
+	}
 	mutex_unlock(&rdev->ring_lock);
 
 	radeon_save_bios_scratch_regs(rdev);
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -609,26 +609,20 @@ int radeon_fence_wait_next_locked(struct
  * Returns 0 if the fences have passed, error for all other cases.
  * Caller must hold ring lock.
  */
-void radeon_fence_wait_empty_locked(struct radeon_device *rdev, int ring)
+int radeon_fence_wait_empty_locked(struct radeon_device *rdev, int ring)
 {
 	uint64_t seq = rdev->fence_drv[ring].sync_seq[ring];
+	int r;
 
-	while(1) {
-		int r;
-		r = radeon_fence_wait_seq(rdev, seq, ring, false, false);
+	r = radeon_fence_wait_seq(rdev, seq, ring, false, false);
+	if (r) {
 		if (r == -EDEADLK) {
-			mutex_unlock(&rdev->ring_lock);
-			r = radeon_gpu_reset(rdev);
-			mutex_lock(&rdev->ring_lock);
-			if (!r)
-				continue;
-		}
-		if (r) {
-			dev_err(rdev->dev, "error waiting for ring to become"
-				" idle (%d)\n", r);
+			return -EDEADLK;
 		}
-		return;
+		dev_err(rdev->dev, "error waiting for ring[%d] to become idle (%d)\n",
+			ring, r);
 	}
+	return 0;
 }
 
 /**
@@ -854,13 +848,17 @@ int radeon_fence_driver_init(struct rade
  */
 void radeon_fence_driver_fini(struct radeon_device *rdev)
 {
-	int ring;
+	int ring, r;
 
 	mutex_lock(&rdev->ring_lock);
 	for (ring = 0; ring < RADEON_NUM_RINGS; ring++) {
 		if (!rdev->fence_drv[ring].initialized)
 			continue;
-		radeon_fence_wait_empty_locked(rdev, ring);
+		r = radeon_fence_wait_empty_locked(rdev, ring);
+		if (r) {
+			/* no need to trigger GPU reset as we are unloading */
+			radeon_fence_driver_force_completion(rdev);
+		}
 		wake_up_all(&rdev->fence_queue);
 		radeon_scratch_free(rdev, rdev->fence_drv[ring].scratch_reg);
 		rdev->fence_drv[ring].initialized = false;
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -234,7 +234,7 @@ static void radeon_set_power_state(struc
 
 static void radeon_pm_set_clocks(struct radeon_device *rdev)
 {
-	int i;
+	int i, r;
 
 	/* no need to take locks, etc. if nothing's going to change */
 	if ((rdev->pm.requested_clock_mode_index == rdev->pm.current_clock_mode_index) &&
@@ -248,8 +248,17 @@ static void radeon_pm_set_clocks(struct
 	/* wait for the rings to drain */
 	for (i = 0; i < RADEON_NUM_RINGS; i++) {
 		struct radeon_ring *ring = &rdev->ring[i];
-		if (ring->ready)
-			radeon_fence_wait_empty_locked(rdev, i);
+		if (!ring->ready) {
+			continue;
+		}
+		r = radeon_fence_wait_empty_locked(rdev, i);
+		if (r) {
+			/* needs a GPU reset dont reset here */
+			mutex_unlock(&rdev->ring_lock);
+			up_write(&rdev->pm.mclk_lock);
+			mutex_unlock(&rdev->ddev->struct_mutex);
+			return;
+		}
 	}
 
 	radeon_unmap_vram_bos(rdev);

[ 075/221] drm/radeon: add WAIT_UNTIL to evergreen VM safe reg list

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 668bbc81baf0f34df832d8aca5c7d5e19a493c68 upstream.

It's used in a recent mesa commit:
http://cgit.freedesktop.org/mesa/mesa/commit/?id=24b1206ab2dcd506aaac3ef656aebc8bc20cd27a
and there may be some other cases in the future where it's required.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/evergreen_cs.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -2724,6 +2724,7 @@ static bool evergreen_vm_reg_valid(u32 r
 
 	/* check config regs */
 	switch (reg) {
+	case WAIT_UNTIL:
 	case GRBM_GFX_INDEX:
 	case CP_STRMOUT_CNTL:
 	case CP_COHER_CNTL:

[ 076/221] drm/radeon: add connector table for Mac G4 Silver

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit cafa59b9011a7790be4ddd5979419259844a165d upstream.

Apple cards do not provide data tables in the vbios
so we have to hard code the connector parameters
in the driver.

Reported-by: Albrecht Dreß <albrecht.dress@arcor.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_combios.c |   51 ++++++++++++++++++++++++++++++++
 drivers/gpu/drm/radeon/radeon_mode.h    |    3 +
 2 files changed, 53 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -1548,6 +1548,9 @@ bool radeon_get_legacy_connector_info_fr
 			   of_machine_is_compatible("PowerBook6,7")) {
 			/* ibook */
 			rdev->mode_info.connector_table = CT_IBOOK;
+		} else if (of_machine_is_compatible("PowerMac3,5")) {
+			/* PowerMac G4 Silver radeon 7500 */
+			rdev->mode_info.connector_table = CT_MAC_G4_SILVER;
 		} else if (of_machine_is_compatible("PowerMac4,4")) {
 			/* emac */
 			rdev->mode_info.connector_table = CT_EMAC;
@@ -2210,6 +2213,54 @@ bool radeon_get_legacy_connector_info_fr
 					    DRM_MODE_CONNECTOR_SVIDEO,
 					    &ddc_i2c,
 					    CONNECTOR_OBJECT_ID_SVIDEO,
+					    &hpd);
+		break;
+	case CT_MAC_G4_SILVER:
+		DRM_INFO("Connector Table: %d (mac g4 silver)\n",
+			 rdev->mode_info.connector_table);
+		/* DVI-I - tv dac, int tmds */
+		ddc_i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
+		hpd.hpd = RADEON_HPD_1; /* ??? */
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_enum(dev,
+								ATOM_DEVICE_DFP1_SUPPORT,
+								0),
+					  ATOM_DEVICE_DFP1_SUPPORT);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_enum(dev,
+								ATOM_DEVICE_CRT2_SUPPORT,
+								2),
+					  ATOM_DEVICE_CRT2_SUPPORT);
+		radeon_add_legacy_connector(dev, 0,
+					    ATOM_DEVICE_DFP1_SUPPORT |
+					    ATOM_DEVICE_CRT2_SUPPORT,
+					    DRM_MODE_CONNECTOR_DVII, &ddc_i2c,
+					    CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I,
+					    &hpd);
+		/* VGA - primary dac */
+		ddc_i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
+		hpd.hpd = RADEON_HPD_NONE;
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_enum(dev,
+								ATOM_DEVICE_CRT1_SUPPORT,
+								1),
+					  ATOM_DEVICE_CRT1_SUPPORT);
+		radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT,
+					    DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+					    CONNECTOR_OBJECT_ID_VGA,
+					    &hpd);
+		/* TV - TV DAC */
+		ddc_i2c.valid = false;
+		hpd.hpd = RADEON_HPD_NONE;
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_enum(dev,
+								ATOM_DEVICE_TV1_SUPPORT,
+								2),
+					  ATOM_DEVICE_TV1_SUPPORT);
+		radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
+					    DRM_MODE_CONNECTOR_SVIDEO,
+					    &ddc_i2c,
+					    CONNECTOR_OBJECT_ID_SVIDEO,
 					    &hpd);
 		break;
 	default:
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -209,7 +209,8 @@ enum radeon_connector_table {
 	CT_RN50_POWER,
 	CT_MAC_X800,
 	CT_MAC_G5_9600,
-	CT_SAM440EP
+	CT_SAM440EP,
+	CT_MAC_G4_SILVER
 };
 
 enum radeon_dvo_chip {

[ 077/221] drm/radeon: Properly handle DDC probe for DP bridges

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Niels Ole Salscheider <niels_ole@salscheider-online.de>

commit 0a9069d34918659bc8a89e21e69e60b2b83291a3 upstream.

DDC information can be accessed using AUX CH

Fixes failure to probe monitors on some systems with
DP bridge chips.

agd5f: minor fixes

Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_connectors.c |   10 ++++++----
 drivers/gpu/drm/radeon/radeon_display.c    |   13 +++++++++----
 drivers/gpu/drm/radeon/radeon_i2c.c        |   10 ++++++++--
 drivers/gpu/drm/radeon/radeon_mode.h       |    2 +-
 4 files changed, 24 insertions(+), 11 deletions(-)

--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -741,7 +741,7 @@ radeon_vga_detect(struct drm_connector *
 		ret = connector_status_disconnected;
 
 	if (radeon_connector->ddc_bus)
-		dret = radeon_ddc_probe(radeon_connector);
+		dret = radeon_ddc_probe(radeon_connector, false);
 	if (dret) {
 		radeon_connector->detected_by_load = false;
 		if (radeon_connector->edid) {
@@ -947,7 +947,7 @@ radeon_dvi_detect(struct drm_connector *
 		return connector->status;
 
 	if (radeon_connector->ddc_bus)
-		dret = radeon_ddc_probe(radeon_connector);
+		dret = radeon_ddc_probe(radeon_connector, false);
 	if (dret) {
 		radeon_connector->detected_by_load = false;
 		if (radeon_connector->edid) {
@@ -1401,7 +1401,8 @@ radeon_dp_detect(struct drm_connector *c
 		if (encoder) {
 			/* setup ddc on the bridge */
 			radeon_atom_ext_encoder_setup_ddc(encoder);
-			if (radeon_ddc_probe(radeon_connector)) /* try DDC */
+			/* bridge chips are always aux */
+			if (radeon_ddc_probe(radeon_connector, true)) /* try DDC */
 				ret = connector_status_connected;
 			else if (radeon_connector->dac_load_detect) { /* try load detection */
 				struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
@@ -1419,7 +1420,8 @@ radeon_dp_detect(struct drm_connector *c
 				if (radeon_dp_getdpcd(radeon_connector))
 					ret = connector_status_connected;
 			} else {
-				if (radeon_ddc_probe(radeon_connector))
+				/* try non-aux ddc (DP to DVI/HMDI/etc. adapter) */
+				if (radeon_ddc_probe(radeon_connector, false))
 					ret = connector_status_connected;
 			}
 		}
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -695,10 +695,15 @@ int radeon_ddc_get_modes(struct radeon_c
 	if (radeon_connector->router.ddc_valid)
 		radeon_router_select_ddc_port(radeon_connector);
 
-	if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
-	    (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP) ||
-	    (radeon_connector_encoder_get_dp_bridge_encoder_id(&radeon_connector->base) !=
-	     ENCODER_OBJECT_ID_NONE)) {
+	if (radeon_connector_encoder_get_dp_bridge_encoder_id(&radeon_connector->base) !=
+	    ENCODER_OBJECT_ID_NONE) {
+		struct radeon_connector_atom_dig *dig = radeon_connector->con_priv;
+
+		if (dig->dp_i2c_bus)
+			radeon_connector->edid = drm_get_edid(&radeon_connector->base,
+							      &dig->dp_i2c_bus->adapter);
+	} else if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
+		   (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) {
 		struct radeon_connector_atom_dig *dig = radeon_connector->con_priv;
 
 		if ((dig->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT ||
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -39,7 +39,7 @@ extern u32 radeon_atom_hw_i2c_func(struc
  * radeon_ddc_probe
  *
  */
-bool radeon_ddc_probe(struct radeon_connector *radeon_connector)
+bool radeon_ddc_probe(struct radeon_connector *radeon_connector, bool use_aux)
 {
 	u8 out = 0x0;
 	u8 buf[8];
@@ -63,7 +63,13 @@ bool radeon_ddc_probe(struct radeon_conn
 	if (radeon_connector->router.ddc_valid)
 		radeon_router_select_ddc_port(radeon_connector);
 
-	ret = i2c_transfer(&radeon_connector->ddc_bus->adapter, msgs, 2);
+	if (use_aux) {
+		struct radeon_connector_atom_dig *dig = radeon_connector->con_priv;
+		ret = i2c_transfer(&dig->dp_i2c_bus->adapter, msgs, 2);
+	} else {
+		ret = i2c_transfer(&radeon_connector->ddc_bus->adapter, msgs, 2);
+	}
+
 	if (ret != 2)
 		/* Couldn't find an accessible DDC on this connector */
 		return false;
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -559,7 +559,7 @@ extern void radeon_i2c_put_byte(struct r
 				u8 val);
 extern void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector);
 extern void radeon_router_select_cd_port(struct radeon_connector *radeon_connector);
-extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector);
+extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector, bool use_aux);
 extern int radeon_ddc_get_modes(struct radeon_connector *radeon_connector);
 
 extern struct drm_encoder *radeon_best_encoder(struct drm_connector *connector);

[ 078/221] drm/nouveau: fix init with agpgart-uninorth

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaro Koskinen <aaro.koskinen@iki.fi>

commit eda85d6ad490923152544fba0473798b6cc0edf6 upstream.

Check that the AGP aperture can be mapped. This follows a similar change
done for Radeon (commit 365048ff, drm/radeon: AGP memory is only I/O if
the aperture can be mapped by the CPU.).

The patch fixes the following error seen on G5 iMac:

	nouveau E[     DRM] failed to create kernel channel, -12

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58806
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/nouveau_bo.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -1279,7 +1279,7 @@ nouveau_ttm_io_mem_reserve(struct ttm_bo
 		if (drm->agp.stat == ENABLED) {
 			mem->bus.offset = mem->start << PAGE_SHIFT;
 			mem->bus.base = drm->agp.base;
-			mem->bus.is_iomem = true;
+			mem->bus.is_iomem = !dev->agp->cant_use_aperture;
 		}
 #endif
 		break;

[ 079/221] drm/i915: make the panel fitter work on pipes B and C on IVB

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

commit 13888d78c664a1f61d7b09d282f5916993827a40 upstream.

I actually found this problem on Haswell, but then discovered Ivy
Bridge also has it by reading the spec.

I don't have the hardware to test this.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_reg.h      |    2 ++
 drivers/gpu/drm/i915/intel_display.c |    6 +++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3315,6 +3315,8 @@
 #define _PFA_CTL_1               0x68080
 #define _PFB_CTL_1               0x68880
 #define  PF_ENABLE              (1<<31)
+#define  PF_PIPE_SEL_MASK_IVB	(3<<29)
+#define  PF_PIPE_SEL_IVB(pipe)	((pipe)<<29)
 #define  PF_FILTER_MASK		(3<<23)
 #define  PF_FILTER_PROGRAMMED	(0<<23)
 #define  PF_FILTER_MED_3x3	(1<<23)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3225,7 +3225,11 @@ static void ironlake_crtc_enable(struct
 		 * as some pre-programmed values are broken,
 		 * e.g. x201.
 		 */
-		I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
+		if (IS_IVYBRIDGE(dev))
+			I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
+						 PF_PIPE_SEL_IVB(pipe));
+		else
+			I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
 		I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
 		I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
 	}

[ 080/221] mm: compaction: partially revert capture of suitable high-order page

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mel Gorman <mgorman@suse.de>

commit 8fb74b9fb2b182d54beee592350d9ea1f325917a upstream.

Eric Wong reported on 3.7 and 3.8-rc2 that ppoll() got stuck when
waiting for POLLIN on a local TCP socket.  It was easier to trigger if
there was disk IO and dirty pages at the same time and he bisected it to
commit 1fb3f8ca0e92 ("mm: compaction: capture a suitable high-order page
immediately when it is made available").

The intention of that patch was to improve high-order allocations under
memory pressure after changes made to reclaim in 3.6 drastically hurt
THP allocations but the approach was flawed.  For Eric, the problem was
that page->pfmemalloc was not being cleared for captured pages leading
to a poor interaction with swap-over-NFS support causing the packets to
be dropped.  However, I identified a few more problems with the patch
including the fact that it can increase contention on zone->lock in some
cases which could result in async direct compaction being aborted early.

In retrospect the capture patch took the wrong approach.  What it should
have done is mark the pageblock being migrated as MIGRATE_ISOLATE if it
was allocating for THP and avoided races that way.  While the patch was
showing to improve allocation success rates at the time, the benefit is
marginal given the relative complexity and it should be revisited from
scratch in the context of the other reclaim-related changes that have
taken place since the patch was first written and tested.  This patch
partially reverts commit 1fb3f8ca0e92 ("mm: compaction: capture a
suitable high-order page immediately when it is made available").

Reported-and-tested-by: Eric Wong <normalperson@yhbt.net>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/compaction.h |    4 -
 include/linux/mm.h         |    1 
 mm/compaction.c            |   92 ++++++---------------------------------------
 mm/internal.h              |    1 
 mm/page_alloc.c            |   35 +++--------------
 5 files changed, 23 insertions(+), 110 deletions(-)

--- a/include/linux/compaction.h
+++ b/include/linux/compaction.h
@@ -22,7 +22,7 @@ extern int sysctl_extfrag_handler(struct
 extern int fragmentation_index(struct zone *zone, unsigned int order);
 extern unsigned long try_to_compact_pages(struct zonelist *zonelist,
 			int order, gfp_t gfp_mask, nodemask_t *mask,
-			bool sync, bool *contended, struct page **page);
+			bool sync, bool *contended);
 extern int compact_pgdat(pg_data_t *pgdat, int order);
 extern void reset_isolation_suitable(pg_data_t *pgdat);
 extern unsigned long compaction_suitable(struct zone *zone, int order);
@@ -75,7 +75,7 @@ static inline bool compaction_restarting
 #else
 static inline unsigned long try_to_compact_pages(struct zonelist *zonelist,
 			int order, gfp_t gfp_mask, nodemask_t *nodemask,
-			bool sync, bool *contended, struct page **page)
+			bool sync, bool *contended)
 {
 	return COMPACT_CONTINUE;
 }
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -455,7 +455,6 @@ void put_pages_list(struct list_head *pa
 
 void split_page(struct page *page, unsigned int order);
 int split_free_page(struct page *page);
-int capture_free_page(struct page *page, int alloc_order, int migratetype);
 
 /*
  * Compound pages have a destructor function.  Provide a
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -214,60 +214,6 @@ static bool suitable_migration_target(st
 	return false;
 }
 
-static void compact_capture_page(struct compact_control *cc)
-{
-	unsigned long flags;
-	int mtype, mtype_low, mtype_high;
-
-	if (!cc->page || *cc->page)
-		return;
-
-	/*
-	 * For MIGRATE_MOVABLE allocations we capture a suitable page ASAP
-	 * regardless of the migratetype of the freelist is is captured from.
-	 * This is fine because the order for a high-order MIGRATE_MOVABLE
-	 * allocation is typically at least a pageblock size and overall
-	 * fragmentation is not impaired. Other allocation types must
-	 * capture pages from their own migratelist because otherwise they
-	 * could pollute other pageblocks like MIGRATE_MOVABLE with
-	 * difficult to move pages and making fragmentation worse overall.
-	 */
-	if (cc->migratetype == MIGRATE_MOVABLE) {
-		mtype_low = 0;
-		mtype_high = MIGRATE_PCPTYPES;
-	} else {
-		mtype_low = cc->migratetype;
-		mtype_high = cc->migratetype + 1;
-	}
-
-	/* Speculatively examine the free lists without zone lock */
-	for (mtype = mtype_low; mtype < mtype_high; mtype++) {
-		int order;
-		for (order = cc->order; order < MAX_ORDER; order++) {
-			struct page *page;
-			struct free_area *area;
-			area = &(cc->zone->free_area[order]);
-			if (list_empty(&area->free_list[mtype]))
-				continue;
-
-			/* Take the lock and attempt capture of the page */
-			if (!compact_trylock_irqsave(&cc->zone->lock, &flags, cc))
-				return;
-			if (!list_empty(&area->free_list[mtype])) {
-				page = list_entry(area->free_list[mtype].next,
-							struct page, lru);
-				if (capture_free_page(page, cc->order, mtype)) {
-					spin_unlock_irqrestore(&cc->zone->lock,
-									flags);
-					*cc->page = page;
-					return;
-				}
-			}
-			spin_unlock_irqrestore(&cc->zone->lock, flags);
-		}
-	}
-}
-
 /*
  * Isolate free pages onto a private freelist. Caller must hold zone->lock.
  * If @strict is true, will abort returning 0 on any invalid PFNs or non-free
@@ -831,6 +777,7 @@ static isolate_migrate_t isolate_migrate
 static int compact_finished(struct zone *zone,
 			    struct compact_control *cc)
 {
+	unsigned int order;
 	unsigned long watermark;
 
 	if (fatal_signal_pending(current))
@@ -865,22 +812,16 @@ static int compact_finished(struct zone
 		return COMPACT_CONTINUE;
 
 	/* Direct compactor: Is a suitable page free? */
-	if (cc->page) {
-		/* Was a suitable page captured? */
-		if (*cc->page)
+	for (order = cc->order; order < MAX_ORDER; order++) {
+		struct free_area *area = &zone->free_area[order];
+
+		/* Job done if page is free of the right migratetype */
+		if (!list_empty(&area->free_list[cc->migratetype]))
+			return COMPACT_PARTIAL;
+
+		/* Job done if allocation would set block type */
+		if (cc->order >= pageblock_order && area->nr_free)
 			return COMPACT_PARTIAL;
-	} else {
-		unsigned int order;
-		for (order = cc->order; order < MAX_ORDER; order++) {
-			struct free_area *area = &zone->free_area[cc->order];
-			/* Job done if page is free of the right migratetype */
-			if (!list_empty(&area->free_list[cc->migratetype]))
-				return COMPACT_PARTIAL;
-
-			/* Job done if allocation would set block type */
-			if (cc->order >= pageblock_order && area->nr_free)
-				return COMPACT_PARTIAL;
-		}
 	}
 
 	return COMPACT_CONTINUE;
@@ -1018,9 +959,6 @@ static int compact_zone(struct zone *zon
 				goto out;
 			}
 		}
-
-		/* Capture a page now if it is a suitable size */
-		compact_capture_page(cc);
 	}
 
 out:
@@ -1033,8 +971,7 @@ out:
 
 static unsigned long compact_zone_order(struct zone *zone,
 				 int order, gfp_t gfp_mask,
-				 bool sync, bool *contended,
-				 struct page **page)
+				 bool sync, bool *contended)
 {
 	unsigned long ret;
 	struct compact_control cc = {
@@ -1044,7 +981,6 @@ static unsigned long compact_zone_order(
 		.migratetype = allocflags_to_migratetype(gfp_mask),
 		.zone = zone,
 		.sync = sync,
-		.page = page,
 	};
 	INIT_LIST_HEAD(&cc.freepages);
 	INIT_LIST_HEAD(&cc.migratepages);
@@ -1074,7 +1010,7 @@ int sysctl_extfrag_threshold = 500;
  */
 unsigned long try_to_compact_pages(struct zonelist *zonelist,
 			int order, gfp_t gfp_mask, nodemask_t *nodemask,
-			bool sync, bool *contended, struct page **page)
+			bool sync, bool *contended)
 {
 	enum zone_type high_zoneidx = gfp_zone(gfp_mask);
 	int may_enter_fs = gfp_mask & __GFP_FS;
@@ -1100,7 +1036,7 @@ unsigned long try_to_compact_pages(struc
 		int status;
 
 		status = compact_zone_order(zone, order, gfp_mask, sync,
-						contended, page);
+						contended);
 		rc = max(status, rc);
 
 		/* If a normal allocation would succeed, stop compacting */
@@ -1156,7 +1092,6 @@ int compact_pgdat(pg_data_t *pgdat, int
 	struct compact_control cc = {
 		.order = order,
 		.sync = false,
-		.page = NULL,
 	};
 
 	return __compact_pgdat(pgdat, &cc);
@@ -1167,7 +1102,6 @@ static int compact_node(int nid)
 	struct compact_control cc = {
 		.order = -1,
 		.sync = true,
-		.page = NULL,
 	};
 
 	return __compact_pgdat(NODE_DATA(nid), &cc);
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -130,7 +130,6 @@ struct compact_control {
 	int migratetype;		/* MOVABLE, RECLAIMABLE etc */
 	struct zone *zone;
 	bool contended;			/* True if a lock was contended */
-	struct page **page;		/* Page captured of requested size */
 };
 
 unsigned long
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1376,14 +1376,8 @@ void split_page(struct page *page, unsig
 		set_page_refcounted(page + i);
 }
 
-/*
- * Similar to the split_page family of functions except that the page
- * required at the given order and being isolated now to prevent races
- * with parallel allocators
- */
-int capture_free_page(struct page *page, int alloc_order, int migratetype)
+static int __isolate_free_page(struct page *page, unsigned int order)
 {
-	unsigned int order;
 	unsigned long watermark;
 	struct zone *zone;
 	int mt;
@@ -1391,7 +1385,6 @@ int capture_free_page(struct page *page,
 	BUG_ON(!PageBuddy(page));
 
 	zone = page_zone(page);
-	order = page_order(page);
 
 	/* Obey watermarks as if the page was being allocated */
 	watermark = low_wmark_pages(zone) + (1 << order);
@@ -1405,13 +1398,9 @@ int capture_free_page(struct page *page,
 
 	mt = get_pageblock_migratetype(page);
 	if (unlikely(mt != MIGRATE_ISOLATE))
-		__mod_zone_freepage_state(zone, -(1UL << alloc_order), mt);
-
-	if (alloc_order != order)
-		expand(zone, page, alloc_order, order,
-			&zone->free_area[order], migratetype);
+		__mod_zone_freepage_state(zone, -(1UL << order), mt);
 
-	/* Set the pageblock if the captured page is at least a pageblock */
+	/* Set the pageblock if the isolated page is at least a pageblock */
 	if (order >= pageblock_order - 1) {
 		struct page *endpage = page + (1 << order) - 1;
 		for (; page < endpage; page += pageblock_nr_pages) {
@@ -1422,7 +1411,7 @@ int capture_free_page(struct page *page,
 		}
 	}
 
-	return 1UL << alloc_order;
+	return 1UL << order;
 }
 
 /*
@@ -1440,10 +1429,9 @@ int split_free_page(struct page *page)
 	unsigned int order;
 	int nr_pages;
 
-	BUG_ON(!PageBuddy(page));
 	order = page_order(page);
 
-	nr_pages = capture_free_page(page, order, 0);
+	nr_pages = __isolate_free_page(page, order);
 	if (!nr_pages)
 		return 0;
 
@@ -2148,8 +2136,6 @@ __alloc_pages_direct_compact(gfp_t gfp_m
 	bool *contended_compaction, bool *deferred_compaction,
 	unsigned long *did_some_progress)
 {
-	struct page *page = NULL;
-
 	if (!order)
 		return NULL;
 
@@ -2161,16 +2147,12 @@ __alloc_pages_direct_compact(gfp_t gfp_m
 	current->flags |= PF_MEMALLOC;
 	*did_some_progress = try_to_compact_pages(zonelist, order, gfp_mask,
 						nodemask, sync_migration,
-						contended_compaction, &page);
+						contended_compaction);
 	current->flags &= ~PF_MEMALLOC;
 
-	/* If compaction captured a page, prep and use it */
-	if (page) {
-		prep_new_page(page, order, gfp_mask);
-		goto got_page;
-	}
-
 	if (*did_some_progress != COMPACT_SKIPPED) {
+		struct page *page;
+
 		/* Page migration frees to the PCP lists but we want merging */
 		drain_pages(get_cpu());
 		put_cpu();
@@ -2180,7 +2162,6 @@ __alloc_pages_direct_compact(gfp_t gfp_m
 				alloc_flags & ~ALLOC_NO_WATERMARKS,
 				preferred_zone, migratetype);
 		if (page) {
-got_page:
 			preferred_zone->compact_blockskip_flush = false;
 			preferred_zone->compact_considered = 0;
 			preferred_zone->compact_defer_shift = 0;

[ 081/221] drm/i915: Close race between processing unpin task and queueing the flip

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit e7d841ca03b7ab668620045cd7b428eda9f41601 upstream.

Before queuing the flip but crucially after attaching the unpin-work to
the crtc, we continue to setup the unpin-work. However, should the
hardware fire early, we see the connected unpin-work and queue the task.
The task then promptly runs and unpins the fb before we finish taking
the required references or even pinning it... Havoc.

To close the race, we use the flip-pending atomic to indicate when the
flip is finally setup and enqueued. So during the flip-done processing,
we can check more accurately whether the flip was expected.

v2: Add the appropriate mb() to ensure that the writes to the page-flip
worker are complete prior to marking it active and emitting the MI_FLIP.
On the read side, the mb should be enforced by the spinlocks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Review the barriers a bit, we need a write barrier both
before and after updating ->pending. Similarly we need a read barrier
in the interrupt handler both before and after reading ->pending. With
well-ordered irqs only one barrier in each place should be required,
but since this patch explicitly sets out to combat spurious interrupts
with is staged activation of the unpin work we need to go full-bore on
the barriers, too. Discussed with Chris Wilson on irc and changes
acked by him.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_debugfs.c  |    4 +--
 drivers/gpu/drm/i915/i915_irq.c      |    4 ++-
 drivers/gpu/drm/i915/intel_display.c |   39 ++++++++++++++++++++++++++++-------
 drivers/gpu/drm/i915/intel_drv.h     |    5 +++-
 4 files changed, 41 insertions(+), 11 deletions(-)

--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -317,7 +317,7 @@ static int i915_gem_pageflip_info(struct
 			seq_printf(m, "No flip due on pipe %c (plane %c)\n",
 				   pipe, plane);
 		} else {
-			if (!work->pending) {
+			if (atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
 				seq_printf(m, "Flip queued on pipe %c (plane %c)\n",
 					   pipe, plane);
 			} else {
@@ -328,7 +328,7 @@ static int i915_gem_pageflip_info(struct
 				seq_printf(m, "Stall check enabled, ");
 			else
 				seq_printf(m, "Stall check waiting for page flip ioctl, ");
-			seq_printf(m, "%d prepares\n", work->pending);
+			seq_printf(m, "%d prepares\n", atomic_read(&work->pending));
 
 			if (work->old_fb_obj) {
 				struct drm_i915_gem_object *obj = work->old_fb_obj;
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1464,7 +1464,9 @@ static void i915_pageflip_stall_check(st
 	spin_lock_irqsave(&dev->event_lock, flags);
 	work = intel_crtc->unpin_work;
 
-	if (work == NULL || work->pending || !work->enable_stall_check) {
+	if (work == NULL ||
+	    atomic_read(&work->pending) >= INTEL_FLIP_COMPLETE ||
+	    !work->enable_stall_check) {
 		/* Either the pending flip IRQ arrived, or we're too early. Don't check */
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 		return;
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6215,11 +6215,18 @@ static void do_intel_finish_page_flip(st
 
 	spin_lock_irqsave(&dev->event_lock, flags);
 	work = intel_crtc->unpin_work;
-	if (work == NULL || !work->pending) {
+
+	/* Ensure we don't miss a work->pending update ... */
+	smp_rmb();
+
+	if (work == NULL || atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) {
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 		return;
 	}
 
+	/* and that the unpin work is consistent wrt ->pending. */
+	smp_rmb();
+
 	intel_crtc->unpin_work = NULL;
 
 	if (work->event) {
@@ -6272,16 +6279,25 @@ void intel_prepare_page_flip(struct drm_
 		to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
 	unsigned long flags;
 
+	/* NB: An MMIO update of the plane base pointer will also
+	 * generate a page-flip completion irq, i.e. every modeset
+	 * is also accompanied by a spurious intel_prepare_page_flip().
+	 */
 	spin_lock_irqsave(&dev->event_lock, flags);
-	if (intel_crtc->unpin_work) {
-		if ((++intel_crtc->unpin_work->pending) > 1)
-			DRM_ERROR("Prepared flip multiple times\n");
-	} else {
-		DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n");
-	}
+	if (intel_crtc->unpin_work)
+		atomic_inc_not_zero(&intel_crtc->unpin_work->pending);
 	spin_unlock_irqrestore(&dev->event_lock, flags);
 }
 
+inline static void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
+{
+	/* Ensure that the work item is consistent when activating it ... */
+	smp_wmb();
+	atomic_set(&intel_crtc->unpin_work->pending, INTEL_FLIP_PENDING);
+	/* and that it is marked active as soon as the irq could fire. */
+	smp_wmb();
+}
+
 static int intel_gen2_queue_flip(struct drm_device *dev,
 				 struct drm_crtc *crtc,
 				 struct drm_framebuffer *fb,
@@ -6315,6 +6331,8 @@ static int intel_gen2_queue_flip(struct
 	intel_ring_emit(ring, fb->pitches[0]);
 	intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
 	intel_ring_emit(ring, 0); /* aux display base address, unused */
+
+	intel_mark_page_flip_active(intel_crtc);
 	intel_ring_advance(ring);
 	return 0;
 
@@ -6355,6 +6373,7 @@ static int intel_gen3_queue_flip(struct
 	intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
 	intel_ring_emit(ring, MI_NOOP);
 
+	intel_mark_page_flip_active(intel_crtc);
 	intel_ring_advance(ring);
 	return 0;
 
@@ -6401,6 +6420,8 @@ static int intel_gen4_queue_flip(struct
 	pf = 0;
 	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
 	intel_ring_emit(ring, pf | pipesrc);
+
+	intel_mark_page_flip_active(intel_crtc);
 	intel_ring_advance(ring);
 	return 0;
 
@@ -6443,6 +6464,8 @@ static int intel_gen6_queue_flip(struct
 	pf = 0;
 	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
 	intel_ring_emit(ring, pf | pipesrc);
+
+	intel_mark_page_flip_active(intel_crtc);
 	intel_ring_advance(ring);
 	return 0;
 
@@ -6497,6 +6520,8 @@ static int intel_gen7_queue_flip(struct
 	intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
 	intel_ring_emit(ring, obj->gtt_offset + intel_crtc->dspaddr_offset);
 	intel_ring_emit(ring, (MI_NOOP));
+
+	intel_mark_page_flip_active(intel_crtc);
 	intel_ring_advance(ring);
 	return 0;
 
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -384,7 +384,10 @@ struct intel_unpin_work {
 	struct drm_i915_gem_object *old_fb_obj;
 	struct drm_i915_gem_object *pending_flip_obj;
 	struct drm_pending_vblank_event *event;
-	int pending;
+	atomic_t pending;
+#define INTEL_FLIP_INACTIVE	0
+#define INTEL_FLIP_PENDING	1
+#define INTEL_FLIP_COMPLETE	2
 	bool enable_stall_check;
 };
 

[ 082/221] drm/i915: Flush outstanding unpin tasks before pageflipping

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit b4a98e57fc27854b5938fc8b08b68e5e68b91e1f upstream.

If we accumulate unpin tasks because we are pageflipping faster than the
system can schedule its workers, we can effectively create a
pin-leak. The solution taken here is to limit the number of unpin tasks
we have per-crtc and to flush those outstanding tasks if we accumulate
too many. This should prevent any jitter in the normal case, and also
prevent the hang if we should run too fast.

Note: It is important that we switch from the system workqueue to our
own dev_priv->wq since all work items on that queue are guaranteed to
only need the dev->struct_mutex and not any modeset resources. For
otherwise if we have a work item ahead in the queue which needs the
modeset lock (like the output detect work used by both polling or
hpd), this work and so the unpin work will never execute since the
pageflip code already holds that lock. Unfortunately there's no
lockdep support for this scenario in the workqueue code.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46991
Reported-and-tested-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Added note about workqueu deadlock.]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56337
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Daniel Gnoutcheff <daniel@gnoutcheff.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_display.c |   22 ++++++++++++++++------
 drivers/gpu/drm/i915/intel_drv.h     |    4 +++-
 2 files changed, 19 insertions(+), 7 deletions(-)

--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6187,14 +6187,19 @@ static void intel_unpin_work_fn(struct w
 {
 	struct intel_unpin_work *work =
 		container_of(__work, struct intel_unpin_work, work);
+	struct drm_device *dev = work->crtc->dev;
 
-	mutex_lock(&work->dev->struct_mutex);
+	mutex_lock(&dev->struct_mutex);
 	intel_unpin_fb_obj(work->old_fb_obj);
 	drm_gem_object_unreference(&work->pending_flip_obj->base);
 	drm_gem_object_unreference(&work->old_fb_obj->base);
 
-	intel_update_fbc(work->dev);
-	mutex_unlock(&work->dev->struct_mutex);
+	intel_update_fbc(dev);
+	mutex_unlock(&dev->struct_mutex);
+
+	BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0);
+	atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count);
+
 	kfree(work);
 }
 
@@ -6249,9 +6254,9 @@ static void do_intel_finish_page_flip(st
 
 	atomic_clear_mask(1 << intel_crtc->plane,
 			  &obj->pending_flip.counter);
-
 	wake_up(&dev_priv->pending_flip_queue);
-	schedule_work(&work->work);
+
+	queue_work(dev_priv->wq, &work->work);
 
 	trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
 }
@@ -6570,7 +6575,7 @@ static int intel_crtc_page_flip(struct d
 		return -ENOMEM;
 
 	work->event = event;
-	work->dev = crtc->dev;
+	work->crtc = crtc;
 	intel_fb = to_intel_framebuffer(crtc->fb);
 	work->old_fb_obj = intel_fb->obj;
 	INIT_WORK(&work->work, intel_unpin_work_fn);
@@ -6595,6 +6600,9 @@ static int intel_crtc_page_flip(struct d
 	intel_fb = to_intel_framebuffer(fb);
 	obj = intel_fb->obj;
 
+	if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
+		flush_workqueue(dev_priv->wq);
+
 	ret = i915_mutex_lock_interruptible(dev);
 	if (ret)
 		goto cleanup;
@@ -6613,6 +6621,7 @@ static int intel_crtc_page_flip(struct d
 	 * the flip occurs and the object is no longer visible.
 	 */
 	atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
+	atomic_inc(&intel_crtc->unpin_work_count);
 
 	ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
 	if (ret)
@@ -6627,6 +6636,7 @@ static int intel_crtc_page_flip(struct d
 	return 0;
 
 cleanup_pending:
+	atomic_dec(&intel_crtc->unpin_work_count);
 	atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
 	drm_gem_object_unreference(&work->old_fb_obj->base);
 	drm_gem_object_unreference(&obj->base);
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -198,6 +198,8 @@ struct intel_crtc {
 	struct intel_unpin_work *unpin_work;
 	int fdi_lanes;
 
+	atomic_t unpin_work_count;
+
 	/* Display surface base address adjustement for pageflips. Note that on
 	 * gen4+ this only adjusts up to a tile, offsets within a tile are
 	 * handled in the hw itself (with the TILEOFF register). */
@@ -380,7 +382,7 @@ intel_get_crtc_for_plane(struct drm_devi
 
 struct intel_unpin_work {
 	struct work_struct work;
-	struct drm_device *dev;
+	struct drm_crtc *crtc;
 	struct drm_i915_gem_object *old_fb_obj;
 	struct drm_i915_gem_object *pending_flip_obj;
 	struct drm_pending_vblank_event *event;

[ 083/221] drm/i915: dont disable disconnected outputs

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit b0a2658acb5bf9ca86b4aab011b7106de3af0add upstream.

This piece of neat lore has been ported painstakingly and bug-for-bug
compatible from the old crtc helper code.

Imo it's utter nonsense.

If you disconnected a cable and before you reconnect it, userspace (or
the kernel) does an set_crtc call, this will result in that connector
getting disabled. Which will result in a nice black screen when
plugging in the cable again.

There's absolutely no reason the kernel does such policy enforcements
- if userspace tries to set up a mode on something disconnected we
might fail loudly (since the dp link training fails), but silently
adjusting the output configuration behind userspace's back is a recipe
for disaster. Specifically I think that this could explain some of our
MI_WAIT hangs around suspend, where userspace issues a scanline wait
on a disable pipe. This mechanisims here could explain how that pipe
got disabled without userspace noticing.

Note that this fixes a NULL deref at BIOS takeover when the firmware
sets up a disconnected output in a clone configuration with a
connected output on the 2nd pipe: When doing the full modeset we don't
have a mode for the 2nd pipe and OOPS. On the first pipe this doesn't
matter, since at boot-up the fbdev helpers will set up the choosen
configuration on that on first. Since this is now the umptenth bug
around handling this imo brain-dead semantics correctly, I think it's
time to kill it and see whether there's any userspace out there which
relies on this.

It also nicely demonstrates that we have a tiny window where DP
hotplug can still kill the driver.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58396
Tested-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_display.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7298,10 +7298,6 @@ intel_modeset_stage_output_state(struct
 			DRM_DEBUG_KMS("encoder changed, full mode switch\n");
 			config->mode_changed = true;
 		}
-
-		/* Disable all disconnected encoders. */
-		if (connector->base.status == connector_status_disconnected)
-			connector->new_encoder = NULL;
 	}
 	/* connector->new_encoder is now updated for all connectors. */
 

[ 084/221] drm/i915: fix flags in dma buf exporting

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Airlie <airlied@redhat.com>

commit 5b42427fc38ecb9056c4e64deaff36d6d6ba1b67 upstream.

As pointed out by Seung-Woo Kim this should have been
passing flags like nouveau/radeon have.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_gem_dmabuf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/i915/i915_gem_dmabuf.c
+++ b/drivers/gpu/drm/i915/i915_gem_dmabuf.c
@@ -226,7 +226,7 @@ struct dma_buf *i915_gem_prime_export(st
 {
 	struct drm_i915_gem_object *obj = to_intel_bo(gem_obj);
 
-	return dma_buf_export(obj, &i915_dmabuf_ops, obj->base.size, 0600);
+	return dma_buf_export(obj, &i915_dmabuf_ops, obj->base.size, flags);
 }
 
 static int i915_gem_object_get_pages_dmabuf(struct drm_i915_gem_object *obj)

[ 085/221] drm/prime: drop reference on imported dma-buf come from gem

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seung-Woo Kim <sw0312.kim@samsung.com>

commit be8a42ae60addd8b6092535c11b42d099d6470ec upstream.

Increasing ref counts of both dma-buf and gem for imported dma-buf come from gem
makes memory leak. release function of dma-buf cannot be called because f_count
of dma-buf increased by importing gem and gem ref count cannot be decrease
because of exported dma-buf.

So I add dma_buf_put() for imported gem come from its own gem into each drivers
having prime_import and prime_export capabilities. With this, only gem ref
count is increased if importing gem exported from gem of same driver.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <rob.clark@linaro.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/exynos/exynos_drm_dmabuf.c |    5 +++++
 drivers/gpu/drm/i915/i915_gem_dmabuf.c     |    5 +++++
 drivers/gpu/drm/nouveau/nouveau_prime.c    |    1 +
 drivers/gpu/drm/radeon/radeon_prime.c      |    1 +
 drivers/staging/omapdrm/omap_gem_dmabuf.c  |    5 +++++
 5 files changed, 17 insertions(+)

--- a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c
@@ -210,7 +210,12 @@ struct drm_gem_object *exynos_dmabuf_pri
 
 		/* is it from our device? */
 		if (obj->dev == drm_dev) {
+			/*
+			 * Importing dmabuf exported from out own gem increases
+			 * refcount on gem itself instead of f_count of dmabuf.
+			 */
 			drm_gem_object_reference(obj);
+			dma_buf_put(dma_buf);
 			return obj;
 		}
 	}
--- a/drivers/gpu/drm/i915/i915_gem_dmabuf.c
+++ b/drivers/gpu/drm/i915/i915_gem_dmabuf.c
@@ -266,7 +266,12 @@ struct drm_gem_object *i915_gem_prime_im
 		obj = dma_buf->priv;
 		/* is it from our device? */
 		if (obj->base.dev == dev) {
+			/*
+			 * Importing dmabuf exported from out own gem increases
+			 * refcount on gem itself instead of f_count of dmabuf.
+			 */
 			drm_gem_object_reference(&obj->base);
+			dma_buf_put(dma_buf);
 			return &obj->base;
 		}
 	}
--- a/drivers/gpu/drm/nouveau/nouveau_prime.c
+++ b/drivers/gpu/drm/nouveau/nouveau_prime.c
@@ -197,6 +197,7 @@ struct drm_gem_object *nouveau_gem_prime
 		if (nvbo->gem) {
 			if (nvbo->gem->dev == dev) {
 				drm_gem_object_reference(nvbo->gem);
+				dma_buf_put(dma_buf);
 				return nvbo->gem;
 			}
 		}
--- a/drivers/gpu/drm/radeon/radeon_prime.c
+++ b/drivers/gpu/drm/radeon/radeon_prime.c
@@ -194,6 +194,7 @@ struct drm_gem_object *radeon_gem_prime_
 		bo = dma_buf->priv;
 		if (bo->gem_base.dev == dev) {
 			drm_gem_object_reference(&bo->gem_base);
+			dma_buf_put(dma_buf);
 			return &bo->gem_base;
 		}
 	}
--- a/drivers/staging/omapdrm/omap_gem_dmabuf.c
+++ b/drivers/staging/omapdrm/omap_gem_dmabuf.c
@@ -207,7 +207,12 @@ struct drm_gem_object * omap_gem_prime_i
 		obj = buffer->priv;
 		/* is it from our device? */
 		if (obj->dev == dev) {
+			/*
+			 * Importing dmabuf exported from out own gem increases
+			 * refcount on gem itself instead of f_count of dmabuf.
+			 */
 			drm_gem_object_reference(obj);
+			dma_buf_put(buffer);
 			return obj;
 		}
 	}

[ 086/221] drm: Only evict the blocks required to create the requested hole

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit 901593f2bf221659a605bdc1dcb11376ea934163 upstream.

Avoid clobbering adjacent blocks if they happen to expire earlier and
amalgamate together to form the requested hole.

In passing this fixes a regression from
commit ea7b1dd44867e9cd6bac67e7c9fc3f128b5b255c
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Feb 18 17:59:12 2011 +0100

    drm: mm: track free areas implicitly

which swaps the end address for size (with a potential overflow) and
effectively causes the eviction code to clobber almost all earlier
buffers above the evictee.

v2: Check the original hole not the adjusted as the coloring may confuse
us when later searching for the overlapping nodes. Also make sure that
we do apply the range restriction and color adjustment in the same
order for both scanning, searching and insertion.

v3: Send the version that was actually tested.

Note that this seems to be ducttape of decent quality ot paper over
some of our unbind related gpu hangs reported since 3.7. It is not
fully effective though, and certainly doesn't fix the underlying bug.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Added note plus bugzilla link and tested-by.]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984
Tested-by:  Norbert Preining <preining@logic.at>
Acked-by: Dave Airlie <airlied@gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/drm_mm.c |   45 +++++++++++++++++----------------------------
 include/drm/drm_mm.h     |    2 +-
 2 files changed, 18 insertions(+), 29 deletions(-)

--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -213,11 +213,13 @@ static void drm_mm_insert_helper_range(s
 
 	BUG_ON(!hole_node->hole_follows || node->allocated);
 
-	if (mm->color_adjust)
-		mm->color_adjust(hole_node, color, &adj_start, &adj_end);
-
 	if (adj_start < start)
 		adj_start = start;
+	if (adj_end > end)
+		adj_end = end;
+
+	if (mm->color_adjust)
+		mm->color_adjust(hole_node, color, &adj_start, &adj_end);
 
 	if (alignment) {
 		unsigned tmp = adj_start % alignment;
@@ -489,7 +491,7 @@ void drm_mm_init_scan(struct drm_mm *mm,
 	mm->scan_size = size;
 	mm->scanned_blocks = 0;
 	mm->scan_hit_start = 0;
-	mm->scan_hit_size = 0;
+	mm->scan_hit_end = 0;
 	mm->scan_check_range = 0;
 	mm->prev_scanned_node = NULL;
 }
@@ -516,7 +518,7 @@ void drm_mm_init_scan_with_range(struct
 	mm->scan_size = size;
 	mm->scanned_blocks = 0;
 	mm->scan_hit_start = 0;
-	mm->scan_hit_size = 0;
+	mm->scan_hit_end = 0;
 	mm->scan_start = start;
 	mm->scan_end = end;
 	mm->scan_check_range = 1;
@@ -535,8 +537,7 @@ int drm_mm_scan_add_block(struct drm_mm_
 	struct drm_mm *mm = node->mm;
 	struct drm_mm_node *prev_node;
 	unsigned long hole_start, hole_end;
-	unsigned long adj_start;
-	unsigned long adj_end;
+	unsigned long adj_start, adj_end;
 
 	mm->scanned_blocks++;
 
@@ -553,14 +554,8 @@ int drm_mm_scan_add_block(struct drm_mm_
 	node->node_list.next = &mm->prev_scanned_node->node_list;
 	mm->prev_scanned_node = node;
 
-	hole_start = drm_mm_hole_node_start(prev_node);
-	hole_end = drm_mm_hole_node_end(prev_node);
-
-	adj_start = hole_start;
-	adj_end = hole_end;
-
-	if (mm->color_adjust)
-		mm->color_adjust(prev_node, mm->scan_color, &adj_start, &adj_end);
+	adj_start = hole_start = drm_mm_hole_node_start(prev_node);
+	adj_end = hole_end = drm_mm_hole_node_end(prev_node);
 
 	if (mm->scan_check_range) {
 		if (adj_start < mm->scan_start)
@@ -569,11 +564,14 @@ int drm_mm_scan_add_block(struct drm_mm_
 			adj_end = mm->scan_end;
 	}
 
+	if (mm->color_adjust)
+		mm->color_adjust(prev_node, mm->scan_color,
+				 &adj_start, &adj_end);
+
 	if (check_free_hole(adj_start, adj_end,
 			    mm->scan_size, mm->scan_alignment)) {
 		mm->scan_hit_start = hole_start;
-		mm->scan_hit_size = hole_end;
-
+		mm->scan_hit_end = hole_end;
 		return 1;
 	}
 
@@ -609,19 +607,10 @@ int drm_mm_scan_remove_block(struct drm_
 			       node_list);
 
 	prev_node->hole_follows = node->scanned_preceeds_hole;
-	INIT_LIST_HEAD(&node->node_list);
 	list_add(&node->node_list, &prev_node->node_list);
 
-	/* Only need to check for containement because start&size for the
-	 * complete resulting free block (not just the desired part) is
-	 * stored. */
-	if (node->start >= mm->scan_hit_start &&
-	    node->start + node->size
-	    		<= mm->scan_hit_start + mm->scan_hit_size) {
-		return 1;
-	}
-
-	return 0;
+	 return (drm_mm_hole_node_end(node) > mm->scan_hit_start &&
+		 node->start < mm->scan_hit_end);
 }
 EXPORT_SYMBOL(drm_mm_scan_remove_block);
 
--- a/include/drm/drm_mm.h
+++ b/include/drm/drm_mm.h
@@ -70,7 +70,7 @@ struct drm_mm {
 	unsigned long scan_color;
 	unsigned long scan_size;
 	unsigned long scan_hit_start;
-	unsigned scan_hit_size;
+	unsigned long scan_hit_end;
 	unsigned scanned_blocks;
 	unsigned long scan_start;
 	unsigned long scan_end;

[ 087/221] drm/i915; Only increment the user-pin-count after successfully pinning the bo

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit 93be8788e648817d62fda33e2998eb6ca6ebf3a3 upstream.

As along the error path we do not correct the user pin-count for the
failure, we may end up with userspace believing that it has a pinned
object at offset 0 (when interrupted by a signal for example).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_gem.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3511,14 +3511,15 @@ i915_gem_pin_ioctl(struct drm_device *de
 		goto out;
 	}
 
-	obj->user_pin_count++;
-	obj->pin_filp = file;
-	if (obj->user_pin_count == 1) {
+	if (obj->user_pin_count == 0) {
 		ret = i915_gem_object_pin(obj, args->alignment, true, false);
 		if (ret)
 			goto out;
 	}
 
+	obj->user_pin_count++;
+	obj->pin_filp = file;
+
 	/* XXX - flush the CPU caches for pinned objects
 	 * as the X server doesn't manage domains yet
 	 */

[ 088/221] drm/i915: Revert shrinker changes from "Track unbound pages"

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit 93927ca52a55c23e0a6a305e7e9082e8411ac9fa upstream.

This partially reverts

commit 6c085a728cf000ac1865d66f8c9b52935558b328
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Aug 20 11:40:46 2012 +0200

    drm/i915: Track unbound pages

Closer inspection of that patch revealed a bunch of unrelated changes
in the shrinker:
- The shrinker count is now in pages instead of objects.
- For counting the shrinkable objects the old code only looked at the
  inactive list, the new code looks at all bounds objects (including
  pinned ones). That is obviously in addition to the new unbound list.
- The shrinker cound is no longer scaled with
  sysctl_vfs_cache_pressure. Note though that with the default tuning
  value of vfs_cache_pressue = 100 this doesn't affect the shrinker
  behaviour.
- When actually shrinking objects, the old code first dropped
  purgeable objects, then normal (inactive) objects. Only then did it,
  in a last-ditch effort idle the gpu and evict everything. The new
  code omits the intermediate step of evicting normal inactive
  objects.

Safe for the first change, which seems benign, and the shrinker count
scaling, which is a bit a different story, the endresult of all these
changes is that the shrinker is _much_ more likely to fall back to the
last-ditch resort of idling the gpu and evicting everything.  The old
code could only do that if something else evicted lots of objects
meanwhile (since without any other changes the nr_to_scan will be
smaller than the object count).

Reverting the vfs_cache_pressure behaviour itself is a bit bogus: Only
dentry/inode object caches should scale their shrinker counts with
vfs_cache_pressure. Originally I've had that change reverted, too. But
Chris Wilson insisted that it's too bogus and shouldn't again see the
light of day.

Hence revert all these other changes and restore the old shrinker
behaviour, with the minor adjustment that we now first scan the
unbound list, then the inactive list for each object category
(purgeable or normal).

A similar patch has been tested by a few people affected by the gen4/5
hangs which started to appear in 3.7, which some people bisected to
the "drm/i915: Track unbound pages" commit. But just disabling the
unbound logic alone didn't change things at all.

Note that this patch doesn't fix the referenced bugs, it only hides
the underlying bug(s) well enough to restore pre-3.7 behaviour. The
key to achieve that is to massively reduce the likelyhood of going
into a full gpu stall and evicting everything.

v2: Reword commit message a bit, taking Chris Wilson's comment into
account.

v3: On Chris Wilson's insistency, do not reinstate the rather bogus
vfs_cache_pressure change.

Tested-by: Greg KH <gregkh@linuxfoundation.org>
Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=55984
References: https://bugs.freedesktop.org/show_bug.cgi?id=57122
References: https://bugs.freedesktop.org/show_bug.cgi?id=56916
References: https://bugs.freedesktop.org/show_bug.cgi?id=57136
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_gem.c |   18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1718,7 +1718,8 @@ i915_gem_object_put_pages(struct drm_i91
 }
 
 static long
-i915_gem_purge(struct drm_i915_private *dev_priv, long target)
+__i915_gem_shrink(struct drm_i915_private *dev_priv, long target,
+		  bool purgeable_only)
 {
 	struct drm_i915_gem_object *obj, *next;
 	long count = 0;
@@ -1726,7 +1727,7 @@ i915_gem_purge(struct drm_i915_private *
 	list_for_each_entry_safe(obj, next,
 				 &dev_priv->mm.unbound_list,
 				 gtt_list) {
-		if (i915_gem_object_is_purgeable(obj) &&
+		if ((i915_gem_object_is_purgeable(obj) || !purgeable_only) &&
 		    i915_gem_object_put_pages(obj) == 0) {
 			count += obj->base.size >> PAGE_SHIFT;
 			if (count >= target)
@@ -1737,7 +1738,7 @@ i915_gem_purge(struct drm_i915_private *
 	list_for_each_entry_safe(obj, next,
 				 &dev_priv->mm.inactive_list,
 				 mm_list) {
-		if (i915_gem_object_is_purgeable(obj) &&
+		if ((i915_gem_object_is_purgeable(obj) || !purgeable_only) &&
 		    i915_gem_object_unbind(obj) == 0 &&
 		    i915_gem_object_put_pages(obj) == 0) {
 			count += obj->base.size >> PAGE_SHIFT;
@@ -1749,6 +1750,12 @@ i915_gem_purge(struct drm_i915_private *
 	return count;
 }
 
+static long
+i915_gem_purge(struct drm_i915_private *dev_priv, long target)
+{
+	return __i915_gem_shrink(dev_priv, target, true);
+}
+
 static void
 i915_gem_shrink_all(struct drm_i915_private *dev_priv)
 {
@@ -4426,6 +4433,9 @@ i915_gem_inactive_shrink(struct shrinker
 	if (nr_to_scan) {
 		nr_to_scan -= i915_gem_purge(dev_priv, nr_to_scan);
 		if (nr_to_scan > 0)
+			nr_to_scan -= __i915_gem_shrink(dev_priv, nr_to_scan,
+							false);
+		if (nr_to_scan > 0)
 			i915_gem_shrink_all(dev_priv);
 	}
 
@@ -4433,7 +4443,7 @@ i915_gem_inactive_shrink(struct shrinker
 	list_for_each_entry(obj, &dev_priv->mm.unbound_list, gtt_list)
 		if (obj->pages_pin_count == 0)
 			cnt += obj->base.size >> PAGE_SHIFT;
-	list_for_each_entry(obj, &dev_priv->mm.bound_list, gtt_list)
+	list_for_each_entry(obj, &dev_priv->mm.inactive_list, gtt_list)
 		if (obj->pin_count == 0 && obj->pages_pin_count == 0)
 			cnt += obj->base.size >> PAGE_SHIFT;
 

[ 089/221] RDMA/nes: Fix for crash when registering zero length MR for CQ

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>

commit 7d9c199a55200c9b9fcad08e150470d02fb385be upstream.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/nes/nes_verbs.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -2559,6 +2559,11 @@ static struct ib_mr *nes_reg_user_mr(str
 			return ibmr;
 		case IWNES_MEMREG_TYPE_QP:
 		case IWNES_MEMREG_TYPE_CQ:
+			if (!region->length) {
+				nes_debug(NES_DBG_MR, "Unable to register zero length region for CQ\n");
+				ib_umem_release(region);
+				return ERR_PTR(-EINVAL);
+			}
 			nespbl = kzalloc(sizeof(*nespbl), GFP_KERNEL);
 			if (!nespbl) {
 				nes_debug(NES_DBG_MR, "Unable to allocate PBL\n");

[ 090/221] RDMA/nes: Fix for terminate timer crash

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>

commit 7bfcfa51c35cdd2d37e0d70fc11790642dd11fb3 upstream.

The terminate timer needs to be initialized just once.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/nes/nes.h       |    1 +
 drivers/infiniband/hw/nes/nes_hw.c    |    9 ++-------
 drivers/infiniband/hw/nes/nes_verbs.c |    4 +++-
 3 files changed, 6 insertions(+), 8 deletions(-)

--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -532,6 +532,7 @@ void nes_iwarp_ce_handler(struct nes_dev
 int nes_destroy_cqp(struct nes_device *);
 int nes_nic_cm_xmit(struct sk_buff *, struct net_device *);
 void nes_recheck_link_status(struct work_struct *work);
+void nes_terminate_timeout(unsigned long context);
 
 /* nes_nic.c */
 struct net_device *nes_netdev_init(struct nes_device *, void __iomem *);
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -75,7 +75,6 @@ static void nes_process_iwarp_aeqe(struc
 static void process_critical_error(struct nes_device *nesdev);
 static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number);
 static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_Mode);
-static void nes_terminate_timeout(unsigned long context);
 static void nes_terminate_start_timer(struct nes_qp *nesqp);
 
 #ifdef CONFIG_INFINIBAND_NES_DEBUG
@@ -3520,7 +3519,7 @@ static void nes_terminate_received(struc
 }
 
 /* Timeout routine in case terminate fails to complete */
-static void nes_terminate_timeout(unsigned long context)
+void nes_terminate_timeout(unsigned long context)
 {
 	struct nes_qp *nesqp = (struct nes_qp *)(unsigned long)context;
 
@@ -3530,11 +3529,7 @@ static void nes_terminate_timeout(unsign
 /* Set a timer in case hw cannot complete the terminate sequence */
 static void nes_terminate_start_timer(struct nes_qp *nesqp)
 {
-	init_timer(&nesqp->terminate_timer);
-	nesqp->terminate_timer.function = nes_terminate_timeout;
-	nesqp->terminate_timer.expires = jiffies + HZ;
-	nesqp->terminate_timer.data = (unsigned long)nesqp;
-	add_timer(&nesqp->terminate_timer);
+	mod_timer(&nesqp->terminate_timer, (jiffies + HZ));
 }
 
 /**
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1404,6 +1404,9 @@ static struct ib_qp *nes_create_qp(struc
 	}
 
 	nesqp->sig_all = (init_attr->sq_sig_type == IB_SIGNAL_ALL_WR);
+	init_timer(&nesqp->terminate_timer);
+	nesqp->terminate_timer.function = nes_terminate_timeout;
+	nesqp->terminate_timer.data = (unsigned long)nesqp;
 
 	/* update the QP table */
 	nesdev->nesadapter->qp_table[nesqp->hwqp.qp_id-NES_FIRST_QPN] = nesqp;
@@ -1413,7 +1416,6 @@ static struct ib_qp *nes_create_qp(struc
 	return &nesqp->ibqp;
 }
 
-
 /**
  * nes_clean_cq
  */

[ 091/221] dm: disable WRITE SAME

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Snitzer <snitzer@redhat.com>

commit c1a94672a830e01d58c7c7e8de530c3f136d6ff2 upstream.

WRITE SAME bios are not yet handled correctly by device-mapper so
disable their use on device-mapper devices by setting
max_write_same_sectors to zero.

As an example, a ciphertext device is incompatible because the data
gets changed according to the location at which it written and so the
dm crypt target cannot support it.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-table.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1445,6 +1445,8 @@ void dm_table_set_restrictions(struct dm
 	else
 		queue_flag_clear_unlocked(QUEUE_FLAG_NONROT, q);
 
+	q->limits.max_write_same_sectors = 0;
+
 	dm_table_set_integrity(t);
 
 	/*

[ 092/221] dm persistent data: rename node to btree_node

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit 550929faf89e2e2cdb3e9945ea87d383989274cf upstream.

This patch fixes a compilation failure on sparc32 by renaming struct node.

struct node is already defined in include/linux/node.h. On sparc32, it
happens to be included through other dependencies and persistent-data
doesn't compile because of conflicting declarations.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/persistent-data/dm-btree-internal.h |   16 ++++----
 drivers/md/persistent-data/dm-btree-remove.c   |   50 ++++++++++++-------------
 drivers/md/persistent-data/dm-btree-spine.c    |    6 +--
 drivers/md/persistent-data/dm-btree.c          |   22 +++++------
 4 files changed, 47 insertions(+), 47 deletions(-)

--- a/drivers/md/persistent-data/dm-btree-internal.h
+++ b/drivers/md/persistent-data/dm-btree-internal.h
@@ -36,13 +36,13 @@ struct node_header {
 	__le32 padding;
 } __packed;
 
-struct node {
+struct btree_node {
 	struct node_header header;
 	__le64 keys[0];
 } __packed;
 
 
-void inc_children(struct dm_transaction_manager *tm, struct node *n,
+void inc_children(struct dm_transaction_manager *tm, struct btree_node *n,
 		  struct dm_btree_value_type *vt);
 
 int new_block(struct dm_btree_info *info, struct dm_block **result);
@@ -64,7 +64,7 @@ struct ro_spine {
 void init_ro_spine(struct ro_spine *s, struct dm_btree_info *info);
 int exit_ro_spine(struct ro_spine *s);
 int ro_step(struct ro_spine *s, dm_block_t new_child);
-struct node *ro_node(struct ro_spine *s);
+struct btree_node *ro_node(struct ro_spine *s);
 
 struct shadow_spine {
 	struct dm_btree_info *info;
@@ -98,17 +98,17 @@ int shadow_root(struct shadow_spine *s);
 /*
  * Some inlines.
  */
-static inline __le64 *key_ptr(struct node *n, uint32_t index)
+static inline __le64 *key_ptr(struct btree_node *n, uint32_t index)
 {
 	return n->keys + index;
 }
 
-static inline void *value_base(struct node *n)
+static inline void *value_base(struct btree_node *n)
 {
 	return &n->keys[le32_to_cpu(n->header.max_entries)];
 }
 
-static inline void *value_ptr(struct node *n, uint32_t index)
+static inline void *value_ptr(struct btree_node *n, uint32_t index)
 {
 	uint32_t value_size = le32_to_cpu(n->header.value_size);
 	return value_base(n) + (value_size * index);
@@ -117,7 +117,7 @@ static inline void *value_ptr(struct nod
 /*
  * Assumes the values are suitably-aligned and converts to core format.
  */
-static inline uint64_t value64(struct node *n, uint32_t index)
+static inline uint64_t value64(struct btree_node *n, uint32_t index)
 {
 	__le64 *values_le = value_base(n);
 
@@ -127,7 +127,7 @@ static inline uint64_t value64(struct no
 /*
  * Searching for a key within a single node.
  */
-int lower_bound(struct node *n, uint64_t key);
+int lower_bound(struct btree_node *n, uint64_t key);
 
 extern struct dm_block_validator btree_node_validator;
 
--- a/drivers/md/persistent-data/dm-btree-remove.c
+++ b/drivers/md/persistent-data/dm-btree-remove.c
@@ -53,7 +53,7 @@
 /*
  * Some little utilities for moving node data around.
  */
-static void node_shift(struct node *n, int shift)
+static void node_shift(struct btree_node *n, int shift)
 {
 	uint32_t nr_entries = le32_to_cpu(n->header.nr_entries);
 	uint32_t value_size = le32_to_cpu(n->header.value_size);
@@ -79,7 +79,7 @@ static void node_shift(struct node *n, i
 	}
 }
 
-static void node_copy(struct node *left, struct node *right, int shift)
+static void node_copy(struct btree_node *left, struct btree_node *right, int shift)
 {
 	uint32_t nr_left = le32_to_cpu(left->header.nr_entries);
 	uint32_t value_size = le32_to_cpu(left->header.value_size);
@@ -108,7 +108,7 @@ static void node_copy(struct node *left,
 /*
  * Delete a specific entry from a leaf node.
  */
-static void delete_at(struct node *n, unsigned index)
+static void delete_at(struct btree_node *n, unsigned index)
 {
 	unsigned nr_entries = le32_to_cpu(n->header.nr_entries);
 	unsigned nr_to_copy = nr_entries - (index + 1);
@@ -128,7 +128,7 @@ static void delete_at(struct node *n, un
 	n->header.nr_entries = cpu_to_le32(nr_entries - 1);
 }
 
-static unsigned merge_threshold(struct node *n)
+static unsigned merge_threshold(struct btree_node *n)
 {
 	return le32_to_cpu(n->header.max_entries) / 3;
 }
@@ -136,7 +136,7 @@ static unsigned merge_threshold(struct n
 struct child {
 	unsigned index;
 	struct dm_block *block;
-	struct node *n;
+	struct btree_node *n;
 };
 
 static struct dm_btree_value_type le64_type = {
@@ -147,7 +147,7 @@ static struct dm_btree_value_type le64_t
 	.equal = NULL
 };
 
-static int init_child(struct dm_btree_info *info, struct node *parent,
+static int init_child(struct dm_btree_info *info, struct btree_node *parent,
 		      unsigned index, struct child *result)
 {
 	int r, inc;
@@ -177,7 +177,7 @@ static int exit_child(struct dm_btree_in
 	return dm_tm_unlock(info->tm, c->block);
 }
 
-static void shift(struct node *left, struct node *right, int count)
+static void shift(struct btree_node *left, struct btree_node *right, int count)
 {
 	uint32_t nr_left = le32_to_cpu(left->header.nr_entries);
 	uint32_t nr_right = le32_to_cpu(right->header.nr_entries);
@@ -203,11 +203,11 @@ static void shift(struct node *left, str
 	right->header.nr_entries = cpu_to_le32(nr_right + count);
 }
 
-static void __rebalance2(struct dm_btree_info *info, struct node *parent,
+static void __rebalance2(struct dm_btree_info *info, struct btree_node *parent,
 			 struct child *l, struct child *r)
 {
-	struct node *left = l->n;
-	struct node *right = r->n;
+	struct btree_node *left = l->n;
+	struct btree_node *right = r->n;
 	uint32_t nr_left = le32_to_cpu(left->header.nr_entries);
 	uint32_t nr_right = le32_to_cpu(right->header.nr_entries);
 	unsigned threshold = 2 * merge_threshold(left) + 1;
@@ -239,7 +239,7 @@ static int rebalance2(struct shadow_spin
 		      unsigned left_index)
 {
 	int r;
-	struct node *parent;
+	struct btree_node *parent;
 	struct child left, right;
 
 	parent = dm_block_data(shadow_current(s));
@@ -270,9 +270,9 @@ static int rebalance2(struct shadow_spin
  * in right, then rebalance2.  This wastes some cpu, but I want something
  * simple atm.
  */
-static void delete_center_node(struct dm_btree_info *info, struct node *parent,
+static void delete_center_node(struct dm_btree_info *info, struct btree_node *parent,
 			       struct child *l, struct child *c, struct child *r,
-			       struct node *left, struct node *center, struct node *right,
+			       struct btree_node *left, struct btree_node *center, struct btree_node *right,
 			       uint32_t nr_left, uint32_t nr_center, uint32_t nr_right)
 {
 	uint32_t max_entries = le32_to_cpu(left->header.max_entries);
@@ -301,9 +301,9 @@ static void delete_center_node(struct dm
 /*
  * Redistributes entries among 3 sibling nodes.
  */
-static void redistribute3(struct dm_btree_info *info, struct node *parent,
+static void redistribute3(struct dm_btree_info *info, struct btree_node *parent,
 			  struct child *l, struct child *c, struct child *r,
-			  struct node *left, struct node *center, struct node *right,
+			  struct btree_node *left, struct btree_node *center, struct btree_node *right,
 			  uint32_t nr_left, uint32_t nr_center, uint32_t nr_right)
 {
 	int s;
@@ -343,12 +343,12 @@ static void redistribute3(struct dm_btre
 	*key_ptr(parent, r->index) = right->keys[0];
 }
 
-static void __rebalance3(struct dm_btree_info *info, struct node *parent,
+static void __rebalance3(struct dm_btree_info *info, struct btree_node *parent,
 			 struct child *l, struct child *c, struct child *r)
 {
-	struct node *left = l->n;
-	struct node *center = c->n;
-	struct node *right = r->n;
+	struct btree_node *left = l->n;
+	struct btree_node *center = c->n;
+	struct btree_node *right = r->n;
 
 	uint32_t nr_left = le32_to_cpu(left->header.nr_entries);
 	uint32_t nr_center = le32_to_cpu(center->header.nr_entries);
@@ -371,7 +371,7 @@ static int rebalance3(struct shadow_spin
 		      unsigned left_index)
 {
 	int r;
-	struct node *parent = dm_block_data(shadow_current(s));
+	struct btree_node *parent = dm_block_data(shadow_current(s));
 	struct child left, center, right;
 
 	/*
@@ -421,7 +421,7 @@ static int get_nr_entries(struct dm_tran
 {
 	int r;
 	struct dm_block *block;
-	struct node *n;
+	struct btree_node *n;
 
 	r = dm_tm_read_lock(tm, b, &btree_node_validator, &block);
 	if (r)
@@ -438,7 +438,7 @@ static int rebalance_children(struct sha
 {
 	int i, r, has_left_sibling, has_right_sibling;
 	uint32_t child_entries;
-	struct node *n;
+	struct btree_node *n;
 
 	n = dm_block_data(shadow_current(s));
 
@@ -483,7 +483,7 @@ static int rebalance_children(struct sha
 	return r;
 }
 
-static int do_leaf(struct node *n, uint64_t key, unsigned *index)
+static int do_leaf(struct btree_node *n, uint64_t key, unsigned *index)
 {
 	int i = lower_bound(n, key);
 
@@ -506,7 +506,7 @@ static int remove_raw(struct shadow_spin
 		      uint64_t key, unsigned *index)
 {
 	int i = *index, r;
-	struct node *n;
+	struct btree_node *n;
 
 	for (;;) {
 		r = shadow_step(s, root, vt);
@@ -556,7 +556,7 @@ int dm_btree_remove(struct dm_btree_info
 	unsigned level, last_level = info->levels - 1;
 	int index = 0, r = 0;
 	struct shadow_spine spine;
-	struct node *n;
+	struct btree_node *n;
 
 	init_shadow_spine(&spine, info);
 	for (level = 0; level < info->levels; level++) {
--- a/drivers/md/persistent-data/dm-btree-spine.c
+++ b/drivers/md/persistent-data/dm-btree-spine.c
@@ -23,7 +23,7 @@ static void node_prepare_for_write(struc
 				   struct dm_block *b,
 				   size_t block_size)
 {
-	struct node *n = dm_block_data(b);
+	struct btree_node *n = dm_block_data(b);
 	struct node_header *h = &n->header;
 
 	h->blocknr = cpu_to_le64(dm_block_location(b));
@@ -38,7 +38,7 @@ static int node_check(struct dm_block_va
 		      struct dm_block *b,
 		      size_t block_size)
 {
-	struct node *n = dm_block_data(b);
+	struct btree_node *n = dm_block_data(b);
 	struct node_header *h = &n->header;
 	size_t value_size;
 	__le32 csum_disk;
@@ -164,7 +164,7 @@ int ro_step(struct ro_spine *s, dm_block
 	return r;
 }
 
-struct node *ro_node(struct ro_spine *s)
+struct btree_node *ro_node(struct ro_spine *s)
 {
 	struct dm_block *block;
 
--- a/drivers/md/persistent-data/dm-btree.c
+++ b/drivers/md/persistent-data/dm-btree.c
@@ -38,7 +38,7 @@ static void array_insert(void *base, siz
 /*----------------------------------------------------------------*/
 
 /* makes the assumption that no two keys are the same. */
-static int bsearch(struct node *n, uint64_t key, int want_hi)
+static int bsearch(struct btree_node *n, uint64_t key, int want_hi)
 {
 	int lo = -1, hi = le32_to_cpu(n->header.nr_entries);
 
@@ -58,12 +58,12 @@ static int bsearch(struct node *n, uint6
 	return want_hi ? hi : lo;
 }
 
-int lower_bound(struct node *n, uint64_t key)
+int lower_bound(struct btree_node *n, uint64_t key)
 {
 	return bsearch(n, key, 0);
 }
 
-void inc_children(struct dm_transaction_manager *tm, struct node *n,
+void inc_children(struct dm_transaction_manager *tm, struct btree_node *n,
 		  struct dm_btree_value_type *vt)
 {
 	unsigned i;
@@ -77,7 +77,7 @@ void inc_children(struct dm_transaction_
 			vt->inc(vt->context, value_ptr(n, i));
 }
 
-static int insert_at(size_t value_size, struct node *node, unsigned index,
+static int insert_at(size_t value_size, struct btree_node *node, unsigned index,
 		      uint64_t key, void *value)
 		      __dm_written_to_disk(value)
 {
@@ -122,7 +122,7 @@ int dm_btree_empty(struct dm_btree_info
 {
 	int r;
 	struct dm_block *b;
-	struct node *n;
+	struct btree_node *n;
 	size_t block_size;
 	uint32_t max_entries;
 
@@ -154,7 +154,7 @@ EXPORT_SYMBOL_GPL(dm_btree_empty);
 #define MAX_SPINE_DEPTH 64
 struct frame {
 	struct dm_block *b;
-	struct node *n;
+	struct btree_node *n;
 	unsigned level;
 	unsigned nr_children;
 	unsigned current_child;
@@ -295,7 +295,7 @@ EXPORT_SYMBOL_GPL(dm_btree_del);
 /*----------------------------------------------------------------*/
 
 static int btree_lookup_raw(struct ro_spine *s, dm_block_t block, uint64_t key,
-			    int (*search_fn)(struct node *, uint64_t),
+			    int (*search_fn)(struct btree_node *, uint64_t),
 			    uint64_t *result_key, void *v, size_t value_size)
 {
 	int i, r;
@@ -406,7 +406,7 @@ static int btree_split_sibling(struct sh
 	size_t size;
 	unsigned nr_left, nr_right;
 	struct dm_block *left, *right, *parent;
-	struct node *ln, *rn, *pn;
+	struct btree_node *ln, *rn, *pn;
 	__le64 location;
 
 	left = shadow_current(s);
@@ -491,7 +491,7 @@ static int btree_split_beneath(struct sh
 	size_t size;
 	unsigned nr_left, nr_right;
 	struct dm_block *left, *right, *new_parent;
-	struct node *pn, *ln, *rn;
+	struct btree_node *pn, *ln, *rn;
 	__le64 val;
 
 	new_parent = shadow_current(s);
@@ -576,7 +576,7 @@ static int btree_insert_raw(struct shado
 			    uint64_t key, unsigned *index)
 {
 	int r, i = *index, top = 1;
-	struct node *node;
+	struct btree_node *node;
 
 	for (;;) {
 		r = shadow_step(s, root, vt);
@@ -643,7 +643,7 @@ static int insert(struct dm_btree_info *
 	unsigned level, index = -1, last_level = info->levels - 1;
 	dm_block_t block = root;
 	struct shadow_spine spine;
-	struct node *n;
+	struct btree_node *n;
 	struct dm_btree_value_type le64_type;
 
 	le64_type.context = NULL;

[ 093/221] dm ioctl: prevent unsafe change to dm_ioctl data_size

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alasdair G Kergon <agk@redhat.com>

commit e910d7ebecd1aac43125944a8641b6cb1a0dfabe upstream.

Abort dm ioctl processing if userspace changes the data_size parameter
after we validated it but before we finished copying the data buffer
from userspace.

The dm ioctl parameters are processed in the following sequence:
 1. ctl_ioctl() calls copy_params();
 2. copy_params() makes a first copy of the fixed-sized portion of the
    userspace parameters into the local variable "tmp";
 3. copy_params() then validates tmp.data_size and allocates a new
    structure big enough to hold the complete data and copies the whole
    userspace buffer there;
 4. ctl_ioctl() reads userspace data the second time and copies the whole
    buffer into the pointer "param";
 5. ctl_ioctl() reads param->data_size without any validation and stores it
    in the variable "input_param_size";
 6. "input_param_size" is further used as the authoritative size of the
    kernel buffer.

The problem is that userspace code could change the contents of user
memory between steps 2 and 4.  In particular, the data_size parameter
can be changed to an invalid value after the kernel has validated it.
This lets userspace force the kernel to access invalid kernel memory.

The fix is to ensure that the size has not changed at step 4.

This patch shouldn't have a security impact because CAP_SYS_ADMIN is
required to run this code, but it should be fixed anyway.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-ioctl.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -1566,6 +1566,14 @@ static int copy_params(struct dm_ioctl _
 	if (copy_from_user(dmi, user, tmp.data_size))
 		goto bad;
 
+	/*
+	 * Abort if something changed the ioctl data while it was being copied.
+	 */
+	if (dmi->data_size != tmp.data_size) {
+		DMERR("rejecting ioctl: data size modified while processing parameters");
+		goto bad;
+	}
+
 	/* Wipe the user buffer so we do not return it to userspace */
 	if (secure_data && clear_user(user, tmp.data_size))
 		goto bad;

[ 094/221] dm thin: replace dm_cell_release_singleton with cell_defer_except

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Thornber <ejt@redhat.com>

commit b7ca9c9273e5eebd63880dd8a6e4e5c18fc7901d upstream.

Change existing users of the function dm_cell_release_singleton to share
cell_defer_except instead, and then remove the now-unused function.

Everywhere that calls dm_cell_release_singleton, the bio in question
is the holder of the cell.

If there are no non-holder entries in the cell then cell_defer_except
behaves exactly like dm_cell_release_singleton.  Conversely, if there
*are* non-holder entries then dm_cell_release_singleton must not be used
because those entries would need to be deferred.

Consequently, it is safe to replace use of dm_cell_release_singleton
with cell_defer_except.

This patch is a pre-requisite for "dm thin: fix race between
simultaneous io and discards to same block".

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-bio-prison.c |   25 -------------------------
 drivers/md/dm-bio-prison.h |    1 -
 drivers/md/dm-thin.c       |   25 ++++++++++++-------------
 3 files changed, 12 insertions(+), 39 deletions(-)

--- a/drivers/md/dm-bio-prison.c
+++ b/drivers/md/dm-bio-prison.c
@@ -208,31 +208,6 @@ void dm_cell_release(struct dm_bio_priso
 EXPORT_SYMBOL_GPL(dm_cell_release);
 
 /*
- * There are a couple of places where we put a bio into a cell briefly
- * before taking it out again.  In these situations we know that no other
- * bio may be in the cell.  This function releases the cell, and also does
- * a sanity check.
- */
-static void __cell_release_singleton(struct dm_bio_prison_cell *cell, struct bio *bio)
-{
-	BUG_ON(cell->holder != bio);
-	BUG_ON(!bio_list_empty(&cell->bios));
-
-	__cell_release(cell, NULL);
-}
-
-void dm_cell_release_singleton(struct dm_bio_prison_cell *cell, struct bio *bio)
-{
-	unsigned long flags;
-	struct dm_bio_prison *prison = cell->prison;
-
-	spin_lock_irqsave(&prison->lock, flags);
-	__cell_release_singleton(cell, bio);
-	spin_unlock_irqrestore(&prison->lock, flags);
-}
-EXPORT_SYMBOL_GPL(dm_cell_release_singleton);
-
-/*
  * Sometimes we don't want the holder, just the additional bios.
  */
 static void __cell_release_no_holder(struct dm_bio_prison_cell *cell, struct bio_list *inmates)
--- a/drivers/md/dm-bio-prison.h
+++ b/drivers/md/dm-bio-prison.h
@@ -44,7 +44,6 @@ int dm_bio_detain(struct dm_bio_prison *
 		  struct bio *inmate, struct dm_bio_prison_cell **ref);
 
 void dm_cell_release(struct dm_bio_prison_cell *cell, struct bio_list *bios);
-void dm_cell_release_singleton(struct dm_bio_prison_cell *cell, struct bio *bio); // FIXME: bio arg not needed
 void dm_cell_release_no_holder(struct dm_bio_prison_cell *cell, struct bio_list *inmates);
 void dm_cell_error(struct dm_bio_prison_cell *cell);
 
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -513,8 +513,7 @@ static void cell_defer(struct thin_c *tc
 }
 
 /*
- * Same as cell_defer above, except it omits one particular detainee,
- * a write bio that covers the block and has already been processed.
+ * Same as cell_defer except it omits the original holder of the cell.
  */
 static void cell_defer_except(struct thin_c *tc, struct dm_bio_prison_cell *cell)
 {
@@ -936,7 +935,7 @@ static void process_discard(struct thin_
 		 */
 		build_data_key(tc->td, lookup_result.block, &key2);
 		if (dm_bio_detain(tc->pool->prison, &key2, bio, &cell2)) {
-			dm_cell_release_singleton(cell, bio);
+			cell_defer_except(tc, cell);
 			break;
 		}
 
@@ -967,8 +966,8 @@ static void process_discard(struct thin_
 			 * a block boundary.  So we submit the discard of a
 			 * partial block appropriately.
 			 */
-			dm_cell_release_singleton(cell, bio);
-			dm_cell_release_singleton(cell2, bio);
+			cell_defer_except(tc, cell);
+			cell_defer_except(tc, cell2);
 			if ((!lookup_result.shared) && pool->pf.discard_passdown)
 				remap_and_issue(tc, bio, lookup_result.block);
 			else
@@ -980,13 +979,13 @@ static void process_discard(struct thin_
 		/*
 		 * It isn't provisioned, just forget it.
 		 */
-		dm_cell_release_singleton(cell, bio);
+		cell_defer_except(tc, cell);
 		bio_endio(bio, 0);
 		break;
 
 	default:
 		DMERR("discard: find block unexpectedly returned %d", r);
-		dm_cell_release_singleton(cell, bio);
+		cell_defer_except(tc, cell);
 		bio_io_error(bio);
 		break;
 	}
@@ -1041,7 +1040,7 @@ static void process_shared_bio(struct th
 
 		h->shared_read_entry = dm_deferred_entry_inc(pool->shared_read_ds);
 
-		dm_cell_release_singleton(cell, bio);
+		cell_defer_except(tc, cell);
 		remap_and_issue(tc, bio, lookup_result->block);
 	}
 }
@@ -1056,7 +1055,7 @@ static void provision_block(struct thin_
 	 * Remap empty bios (flushes) immediately, without provisioning.
 	 */
 	if (!bio->bi_size) {
-		dm_cell_release_singleton(cell, bio);
+		cell_defer_except(tc, cell);
 		remap_and_issue(tc, bio, 0);
 		return;
 	}
@@ -1066,7 +1065,7 @@ static void provision_block(struct thin_
 	 */
 	if (bio_data_dir(bio) == READ) {
 		zero_fill_bio(bio);
-		dm_cell_release_singleton(cell, bio);
+		cell_defer_except(tc, cell);
 		bio_endio(bio, 0);
 		return;
 	}
@@ -1120,7 +1119,7 @@ static void process_bio(struct thin_c *t
 		 * TODO: this will probably have to change when discard goes
 		 * back in.
 		 */
-		dm_cell_release_singleton(cell, bio);
+		cell_defer_except(tc, cell);
 
 		if (lookup_result.shared)
 			process_shared_bio(tc, bio, block, &lookup_result);
@@ -1130,7 +1129,7 @@ static void process_bio(struct thin_c *t
 
 	case -ENODATA:
 		if (bio_data_dir(bio) == READ && tc->origin_dev) {
-			dm_cell_release_singleton(cell, bio);
+			cell_defer_except(tc, cell);
 			remap_to_origin_and_issue(tc, bio);
 		} else
 			provision_block(tc, bio, block, cell);
@@ -1138,7 +1137,7 @@ static void process_bio(struct thin_c *t
 
 	default:
 		DMERR("dm_thin_find_block() failed, error = %d", r);
-		dm_cell_release_singleton(cell, bio);
+		cell_defer_except(tc, cell);
 		bio_io_error(bio);
 		break;
 	}

[ 095/221] staging: vt6656: [BUG] out of bound array reference in RFbSetPower.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit ab1dd9963137a1e122004d5378a581bf16ae9bc8 upstream.

Calling RFbSetPower with uCH zero value will cause out of bound array reference.

This causes 64 bit kernels to oops on boot.

Note: Driver does not function on 64 bit kernels and should be
blacklisted on them.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/rf.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/staging/vt6656/rf.c
+++ b/drivers/staging/vt6656/rf.c
@@ -769,6 +769,9 @@ BYTE    byPwr = pDevice->byCCKPwr;
         return TRUE;
     }
 
+	if (uCH == 0)
+		return -EINVAL;
+
     switch (uRATE) {
     case RATE_1M:
     case RATE_2M:

[ 096/221] staging: vt6656: 64 bit fixes: use u32 for QWORD definition.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit a552397d5e4ef0cc0bd3e9595d6acc9a3b381171 upstream.

Size of long issues replace with u32.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/ttype.h |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/staging/vt6656/ttype.h
+++ b/drivers/staging/vt6656/ttype.h
@@ -29,6 +29,8 @@
 #ifndef __TTYPE_H__
 #define __TTYPE_H__
 
+#include <linux/types.h>
+
 /******* Common definitions and typedefs ***********************************/
 
 typedef int             BOOL;
@@ -51,8 +53,8 @@ typedef unsigned long   DWORD;
 // which is NOT really a floating point number.
 typedef union tagUQuadWord {
     struct {
-        DWORD   dwLowDword;
-        DWORD   dwHighDword;
+	u32 dwLowDword;
+	u32 dwHighDword;
     } u;
     double      DoNotUseThisField;
 } UQuadWord;

[ 097/221] staging: vt6656: 64 bit fixes : correct all type sizes

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit 7730492855a2f9c828599bcd8d62760f96d319e4 upstream.

After this patch all BYTE/WORD/DWORD types can be replaced with the appropriate u sizes.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/ttype.h |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/staging/vt6656/ttype.h
+++ b/drivers/staging/vt6656/ttype.h
@@ -44,9 +44,9 @@ typedef int             BOOL;
 
 /****** Simple typedefs  ***************************************************/
 
-typedef unsigned char   BYTE;           //  8-bit
-typedef unsigned short  WORD;           // 16-bit
-typedef unsigned long   DWORD;          // 32-bit
+typedef u8 BYTE;
+typedef u16 WORD;
+typedef u32 DWORD;
 
 // QWORD is for those situation that we want
 // an 8-byte-aligned 8 byte long structure
@@ -62,8 +62,8 @@ typedef UQuadWord       QWORD;
 
 /****** Common pointer types ***********************************************/
 
-typedef unsigned long   ULONG_PTR;      // 32-bit
-typedef unsigned long   DWORD_PTR;      // 32-bit
+typedef u32 ULONG_PTR;
+typedef u32 DWORD_PTR;
 
 // boolean pointer
 

[ 098/221] staging: vt6656: 64 bit fixes: fix long warning messages.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit b4dc03af5513774277c9c36b12a25cd3f25f4404 upstream.

Fixes long warning messages from patch
[PATCH 08/14] staging: vt6656: 64 bit fixes : correct all type sizes

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/dpc.c  |    4 +--
 drivers/staging/vt6656/key.c  |   47 +++++++++++++++++++++++++++++-------------
 drivers/staging/vt6656/mac.c  |    6 +++--
 drivers/staging/vt6656/rxtx.c |   18 ++++++++++------
 4 files changed, 51 insertions(+), 24 deletions(-)

--- a/drivers/staging/vt6656/dpc.c
+++ b/drivers/staging/vt6656/dpc.c
@@ -1238,7 +1238,7 @@ static BOOL s_bHandleRxEncryption (
 
         PayloadLen -= (WLAN_HDR_ADDR3_LEN + 8 + 4); // 24 is 802.11 header, 8 is IV&ExtIV, 4 is crc
         *pdwRxTSC47_16 = cpu_to_le32(*(PDWORD)(pbyIV + 4));
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %lx\n",*pdwRxTSC47_16);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %x\n", *pdwRxTSC47_16);
         if (byDecMode == KEY_CTL_TKIP) {
             *pwRxTSC15_0 = cpu_to_le16(MAKEWORD(*(pbyIV+2), *pbyIV));
         } else {
@@ -1349,7 +1349,7 @@ static BOOL s_bHostWepRxEncryption (
 
         PayloadLen -= (WLAN_HDR_ADDR3_LEN + 8 + 4); // 24 is 802.11 header, 8 is IV&ExtIV, 4 is crc
         *pdwRxTSC47_16 = cpu_to_le32(*(PDWORD)(pbyIV + 4));
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %lx\n",*pdwRxTSC47_16);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %x\n", *pdwRxTSC47_16);
 
         if (byDecMode == KEY_CTL_TKIP) {
             *pwRxTSC15_0 = cpu_to_le16(MAKEWORD(*(pbyIV+2), *pbyIV));
--- a/drivers/staging/vt6656/key.c
+++ b/drivers/staging/vt6656/key.c
@@ -235,7 +235,8 @@ BOOL KeybSetKey(
     PSKeyItem   pKey;
     unsigned int        uKeyIdx;
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Enter KeybSetKey: %lX\n", dwKeyIndex);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
+		"Enter KeybSetKey: %X\n", dwKeyIndex);
 
     j = (MAX_KEY_TABLE-1);
     for (i=0;i<(MAX_KEY_TABLE-1);i++) {
@@ -261,7 +262,9 @@ BOOL KeybSetKey(
                 if ((dwKeyIndex & TRANSMIT_KEY) != 0)  {
                     // Group transmit key
                     pTable->KeyTable[i].dwGTKeyIndex = dwKeyIndex;
-                    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Group transmit key(R)[%lX]: %d\n", pTable->KeyTable[i].dwGTKeyIndex, i);
+			DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
+				"Group transmit key(R)[%X]: %d\n",
+					pTable->KeyTable[i].dwGTKeyIndex, i);
                 }
                 pTable->KeyTable[i].wKeyCtl &= 0xFF0F;          // clear group key control filed
                 pTable->KeyTable[i].wKeyCtl |= (byKeyDecMode << 4);
@@ -302,9 +305,12 @@ BOOL KeybSetKey(
             }
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
 
-            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %lx\n ", pKey->dwTSC47_16);
-            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n ", pKey->wTSC15_0);
-            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %lx\n ", pKey->dwKeyIndex);
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %x\n ",
+			pKey->dwTSC47_16);
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n ",
+			pKey->wTSC15_0);
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %x\n ",
+			pKey->dwKeyIndex);
 
             return (TRUE);
         }
@@ -326,7 +332,9 @@ BOOL KeybSetKey(
             if ((dwKeyIndex & TRANSMIT_KEY) != 0)  {
                 // Group transmit key
                 pTable->KeyTable[j].dwGTKeyIndex = dwKeyIndex;
-                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Group transmit key(N)[%lX]: %d\n", pTable->KeyTable[j].dwGTKeyIndex, j);
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
+			"Group transmit key(N)[%X]: %d\n",
+				pTable->KeyTable[j].dwGTKeyIndex, j);
             }
             pTable->KeyTable[j].wKeyCtl &= 0xFF0F;          // clear group key control filed
             pTable->KeyTable[j].wKeyCtl |= (byKeyDecMode << 4);
@@ -367,9 +375,11 @@ BOOL KeybSetKey(
         }
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
 
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %lx\n ", pKey->dwTSC47_16);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %x\n ",
+		pKey->dwTSC47_16);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n ", pKey->wTSC15_0);
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %lx\n ", pKey->dwKeyIndex);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %x\n ",
+		pKey->dwKeyIndex);
 
         return (TRUE);
     }
@@ -597,7 +607,8 @@ BOOL KeybGetTransmitKey(PSKeyManagement
                             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%x ", pTable->KeyTable[i].abyBSSID[ii]);
                         }
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
-                        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"dwGTKeyIndex: %lX\n", pTable->KeyTable[i].dwGTKeyIndex);
+			DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"dwGTKeyIndex: %X\n",
+				pTable->KeyTable[i].dwGTKeyIndex);
 
                     return (TRUE);
                 }
@@ -696,7 +707,10 @@ BOOL KeybSetDefaultKey(
     if ((dwKeyIndex & TRANSMIT_KEY) != 0)  {
         // Group transmit key
         pTable->KeyTable[MAX_KEY_TABLE-1].dwGTKeyIndex = dwKeyIndex;
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Group transmit key(R)[%lX]: %d\n", pTable->KeyTable[MAX_KEY_TABLE-1].dwGTKeyIndex, MAX_KEY_TABLE-1);
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
+		"Group transmit key(R)[%X]: %d\n",
+		pTable->KeyTable[MAX_KEY_TABLE-1].dwGTKeyIndex,
+		MAX_KEY_TABLE-1);
 
     }
     pTable->KeyTable[MAX_KEY_TABLE-1].wKeyCtl &= 0x7F00;          // clear all key control filed
@@ -747,9 +761,11 @@ BOOL KeybSetDefaultKey(
     }
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %lx\n", pKey->dwTSC47_16);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwTSC47_16: %x\n",
+		pKey->dwTSC47_16);
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n", pKey->wTSC15_0);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %lx\n", pKey->dwKeyIndex);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %x\n",
+		pKey->dwKeyIndex);
 
     return (TRUE);
 }
@@ -787,7 +803,8 @@ BOOL KeybSetAllGroupKey(
     PSKeyItem   pKey;
     unsigned int        uKeyIdx;
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Enter KeybSetAllGroupKey: %lX\n", dwKeyIndex);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Enter KeybSetAllGroupKey: %X\n",
+		dwKeyIndex);
 
 
     if ((dwKeyIndex & PAIRWISE_KEY) != 0) {                  // Pairwise key
@@ -804,7 +821,9 @@ BOOL KeybSetAllGroupKey(
             if ((dwKeyIndex & TRANSMIT_KEY) != 0)  {
                 // Group transmit key
                 pTable->KeyTable[i].dwGTKeyIndex = dwKeyIndex;
-                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Group transmit key(R)[%lX]: %d\n", pTable->KeyTable[i].dwGTKeyIndex, i);
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
+			"Group transmit key(R)[%X]: %d\n",
+			pTable->KeyTable[i].dwGTKeyIndex, i);
 
             }
             pTable->KeyTable[i].wKeyCtl &= 0xFF0F;          // clear group key control filed
--- a/drivers/staging/vt6656/mac.c
+++ b/drivers/staging/vt6656/mac.c
@@ -260,7 +260,8 @@ BYTE            pbyData[24];
     dwData1 <<= 16;
     dwData1 |= MAKEWORD(*(pbyAddr+4), *(pbyAddr+5));
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"1. wOffset: %d, Data: %lX, KeyCtl:%X\n", wOffset, dwData1, wKeyCtl);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"1. wOffset: %d, Data: %X,"\
+		" KeyCtl:%X\n", wOffset, dwData1, wKeyCtl);
 
     //VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
     //VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
@@ -277,7 +278,8 @@ BYTE            pbyData[24];
     dwData2 <<= 8;
     dwData2 |= *(pbyAddr+0);
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"2. wOffset: %d, Data: %lX\n", wOffset, dwData2);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"2. wOffset: %d, Data: %X\n",
+		wOffset, dwData2);
 
     //VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, wOffset);
     //VNSvOutPortD(dwIoBase + MAC_REG_MISCFFDATA, dwData);
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -375,7 +375,8 @@ s_vFillTxKey (
         *(pbyIVHead+3) = (BYTE)(((pDevice->byKeyIndex << 6) & 0xc0) | 0x20); // 0x20 is ExtIV
         // Append IV&ExtIV after Mac Header
         *pdwExtIV = cpu_to_le32(pTransmitKey->dwTSC47_16);
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vFillTxKey()---- pdwExtIV: %lx\n", *pdwExtIV);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vFillTxKey()---- pdwExtIV: %x\n",
+		*pdwExtIV);
 
     } else if (pTransmitKey->byCipherSuite == KEY_CTL_CCMP) {
         pTransmitKey->wTSC15_0++;
@@ -1751,7 +1752,8 @@ s_bPacketToWirelessUsb(
         MIC_vAppend((PBYTE)&(psEthHeader->abyDstAddr[0]), 12);
         dwMIC_Priority = 0;
         MIC_vAppend((PBYTE)&dwMIC_Priority, 4);
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC KEY: %lX, %lX\n", dwMICKey0, dwMICKey1);
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC KEY: %X, %X\n",
+		dwMICKey0, dwMICKey1);
 
         ///////////////////////////////////////////////////////////////////
 
@@ -2633,7 +2635,8 @@ vDMA0_tx_80211(PSDevice  pDevice, struct
             MIC_vAppend((PBYTE)&(sEthHeader.abyDstAddr[0]), 12);
             dwMIC_Priority = 0;
             MIC_vAppend((PBYTE)&dwMIC_Priority, 4);
-            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"DMA0_tx_8021:MIC KEY: %lX, %lX\n", dwMICKey0, dwMICKey1);
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"DMA0_tx_8021:MIC KEY:"\
+			" %X, %X\n", dwMICKey0, dwMICKey1);
 
             uLength = cbHeaderSize + cbMacHdLen + uPadding + cbIVlen;
 
@@ -2653,7 +2656,8 @@ vDMA0_tx_80211(PSDevice  pDevice, struct
 
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"uLength: %d, %d\n", uLength, cbFrameBodySize);
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"cbReqCount:%d, %d, %d, %d\n", cbReqCount, cbHeaderSize, uPadding, cbIVlen);
-            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC:%lx, %lx\n", *pdwMIC_L, *pdwMIC_R);
+		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC:%x, %x\n",
+			*pdwMIC_L, *pdwMIC_R);
 
         }
 
@@ -3027,7 +3031,8 @@ int nsDMA_tx_packet(PSDevice pDevice, un
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"error: KEY is GTK!!~~\n");
                     }
                     else {
-                        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%lX]\n", pTransmitKey->dwKeyIndex);
+			DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%X]\n",
+				pTransmitKey->dwKeyIndex);
                         bNeedEncryption = TRUE;
                     }
                 }
@@ -3041,7 +3046,8 @@ int nsDMA_tx_packet(PSDevice pDevice, un
             if (pDevice->bEnableHostWEP) {
                 if ((uNodeIndex != 0) &&
                     (pMgmt->sNodeDBTable[uNodeIndex].dwKeyIndex & PAIRWISE_KEY)) {
-                    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%lX]\n", pTransmitKey->dwKeyIndex);
+			DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%X]\n",
+				pTransmitKey->dwKeyIndex);
                     bNeedEncryption = TRUE;
                  }
              }

[ 099/221] staging: vt6656: 64bit fixes: key.c/h change unsigned long to u32

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit c0d05b305b00c698b0a8c1b3d46c9380bce9db45 upstream.

Fixes long issues.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/key.c |    6 +++---
 drivers/staging/vt6656/key.h |    8 ++++----
 2 files changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/staging/vt6656/key.c
+++ b/drivers/staging/vt6656/key.c
@@ -223,7 +223,7 @@ BOOL KeybSetKey(
     PSKeyManagement pTable,
     PBYTE           pbyBSSID,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
@@ -675,7 +675,7 @@ BOOL KeybSetDefaultKey(
     void *pDeviceHandler,
     PSKeyManagement pTable,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
@@ -791,7 +791,7 @@ BOOL KeybSetAllGroupKey(
     void *pDeviceHandler,
     PSKeyManagement pTable,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
--- a/drivers/staging/vt6656/key.h
+++ b/drivers/staging/vt6656/key.h
@@ -58,7 +58,7 @@
 typedef struct tagSKeyItem
 {
     BOOL        bKeyValid;
-    unsigned long       uKeyLength;
+	u32 uKeyLength;
     BYTE        abyKey[MAX_KEY_LEN];
     QWORD       KeyRSC;
     DWORD       dwTSC47_16;
@@ -107,7 +107,7 @@ BOOL KeybSetKey(
     PSKeyManagement pTable,
     PBYTE           pbyBSSID,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
@@ -146,7 +146,7 @@ BOOL KeybSetDefaultKey(
     void *pDeviceHandler,
     PSKeyManagement pTable,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode
@@ -156,7 +156,7 @@ BOOL KeybSetAllGroupKey(
     void *pDeviceHandler,
     PSKeyManagement pTable,
     DWORD           dwKeyIndex,
-    unsigned long           uKeyLength,
+	u32 uKeyLength,
     PQWORD          pKeyRSC,
     PBYTE           pbyKey,
     BYTE            byKeyDecMode

[ 100/221] staging: vt6656: 64bit fixes: vCommandTimerWait change calculation of timer.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit 70e227790d4ee4590023d8041a3485f8053593fc upstream.

The timer appears to run too fast/race on 64 bit systems.

Using msecs_to_jiffies seems to cause a deadlock on 64 bit.

A calculation of (MSecond * HZ) / 1000 appears to run satisfactory.

Change BSSIDInfoCount to u32.

After this patch the driver can be successfully connect on little endian 64/32 bit systems.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/wcmd.c |   20 +++++++++++---------
 drivers/staging/vt6656/wpa2.h |    4 ++--
 2 files changed, 13 insertions(+), 11 deletions(-)

--- a/drivers/staging/vt6656/wcmd.c
+++ b/drivers/staging/vt6656/wcmd.c
@@ -316,17 +316,19 @@ s_MgrMakeProbeRequest(
     return pTxPacket;
 }
 
-void vCommandTimerWait(void *hDeviceContext, unsigned int MSecond)
+void vCommandTimerWait(void *hDeviceContext, unsigned long MSecond)
 {
-    PSDevice        pDevice = (PSDevice)hDeviceContext;
+	PSDevice pDevice = (PSDevice)hDeviceContext;
 
-    init_timer(&pDevice->sTimerCommand);
-    pDevice->sTimerCommand.data = (unsigned long)pDevice;
-    pDevice->sTimerCommand.function = (TimerFunction)vRunCommand;
-    // RUN_AT :1 msec ~= (HZ/1024)
-    pDevice->sTimerCommand.expires = (unsigned int)RUN_AT((MSecond * HZ) >> 10);
-    add_timer(&pDevice->sTimerCommand);
-    return;
+	init_timer(&pDevice->sTimerCommand);
+
+	pDevice->sTimerCommand.data = (unsigned long)pDevice;
+	pDevice->sTimerCommand.function = (TimerFunction)vRunCommand;
+	pDevice->sTimerCommand.expires = RUN_AT((MSecond * HZ) / 1000);
+
+	add_timer(&pDevice->sTimerCommand);
+
+	return;
 }
 
 void vRunCommand(void *hDeviceContext)
--- a/drivers/staging/vt6656/wpa2.h
+++ b/drivers/staging/vt6656/wpa2.h
@@ -45,8 +45,8 @@ typedef struct tagsPMKIDInfo {
 } PMKIDInfo, *PPMKIDInfo;
 
 typedef struct tagSPMKIDCache {
-    unsigned long       BSSIDInfoCount;
-    PMKIDInfo   BSSIDInfo[MAX_PMKID_CACHE];
+	u32 BSSIDInfoCount;
+	PMKIDInfo BSSIDInfo[MAX_PMKID_CACHE];
 } SPMKIDCache, *PSPMKIDCache;
 
 

[ 101/221] hwmon: (lm73} Detect and report i2c bus errors

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Verges <kg4ysn@gmail.com>

commit 0602934f302e016e2ea5dc6951681bfac77455ef upstream.

If an LM73 device does not exist on an I2C bus, attempts to communicate
with the device result in an error code returned from the i2c read/write
functions.  The current lm73 driver casts that return value from a s32
type to a s16 type, then converts it to a temperature in celsius.
Because negative temperatures are valid, it is difficult to distinguish
between an error code printed to the response buffer and a negative
temperature recorded by the sensor.

The solution is to evaluate the return value from the i2c functions
before performing any temperature calculations.  If the i2c function did
not succeed, the error code should be passed back through the virtual
file system layer instead of being printed into the response buffer.

Before:

   $ cat /sys/class/hwmon/hwmon0/device/temp1_input
   -46

After:

   $ cat /sys/class/hwmon/hwmon0/device/temp1_input
   cat: read error: No such device or address

Signed-off-by: Chris Verges <kg4ysn@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwmon/lm73.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

--- a/drivers/hwmon/lm73.c
+++ b/drivers/hwmon/lm73.c
@@ -49,6 +49,7 @@ static ssize_t set_temp(struct device *d
 	struct i2c_client *client = to_i2c_client(dev);
 	long temp;
 	short value;
+	s32 err;
 
 	int status = kstrtol(buf, 10, &temp);
 	if (status < 0)
@@ -57,8 +58,8 @@ static ssize_t set_temp(struct device *d
 	/* Write value */
 	value = (short) SENSORS_LIMIT(temp/250, (LM73_TEMP_MIN*4),
 		(LM73_TEMP_MAX*4)) << 5;
-	i2c_smbus_write_word_swapped(client, attr->index, value);
-	return count;
+	err = i2c_smbus_write_word_swapped(client, attr->index, value);
+	return (err < 0) ? err : count;
 }
 
 static ssize_t show_temp(struct device *dev, struct device_attribute *da,
@@ -66,11 +67,16 @@ static ssize_t show_temp(struct device *
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	struct i2c_client *client = to_i2c_client(dev);
+	int temp;
+
+	s32 err = i2c_smbus_read_word_swapped(client, attr->index);
+	if (err < 0)
+		return err;
+
 	/* use integer division instead of equivalent right shift to
 	   guarantee arithmetic shift and preserve the sign */
-	int temp = ((s16) (i2c_smbus_read_word_swapped(client,
-		    attr->index))*250) / 32;
-	return sprintf(buf, "%d\n", temp);
+	temp = (((s16) err) * 250) / 32;
+	return scnprintf(buf, PAGE_SIZE, "%d\n", temp);
 }
 
 

[ 102/221] audit: create explicit AUDIT_SECCOMP event type

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 7b9205bd775afc4439ed86d617f9042ee9e76a71 upstream.

The seccomp path was using AUDIT_ANOM_ABEND from when seccomp mode 1
could only kill a process.  While we still want to make sure an audit
record is forced on a kill, this should use a separate record type since
seccomp mode 2 introduces other behaviors.

In the case of "handled" behaviors (process wasn't killed), only emit a
record if the process is under inspection.  This change also fixes
userspace examination of seccomp audit events, since it was considered
malformed due to missing fields of the AUDIT_ANOM_ABEND event type.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Julien Tinnes <jln@google.com>
Acked-by: Will Drewry <wad@chromium.org>
Acked-by: Steve Grubb <sgrubb@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/audit.h      |    3 ++-
 include/uapi/linux/audit.h |    1 +
 kernel/auditsc.c           |   14 +++++++++++---
 3 files changed, 14 insertions(+), 4 deletions(-)

--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -157,7 +157,8 @@ void audit_core_dumps(long signr);
 
 static inline void audit_seccomp(unsigned long syscall, long signr, int code)
 {
-	if (unlikely(!audit_dummy_context()))
+	/* Force a record to be reported if a signal was delivered. */
+	if (signr || unlikely(!audit_dummy_context()))
 		__audit_seccomp(syscall, signr, code);
 }
 
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -106,6 +106,7 @@
 #define AUDIT_MMAP		1323	/* Record showing descriptor and flags in mmap */
 #define AUDIT_NETFILTER_PKT	1324	/* Packets traversing netfilter chains */
 #define AUDIT_NETFILTER_CFG	1325	/* Netfilter chain modifications */
+#define AUDIT_SECCOMP		1326	/* Secure Computing event */
 
 #define AUDIT_AVC		1400	/* SE Linux avc denial or grant */
 #define AUDIT_SELINUX_ERR	1401	/* Internal SE Linux Errors */
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -2735,7 +2735,7 @@ void __audit_mmap_fd(int fd, int flags)
 	context->type = AUDIT_MMAP;
 }
 
-static void audit_log_abend(struct audit_buffer *ab, char *reason, long signr)
+static void audit_log_task(struct audit_buffer *ab)
 {
 	kuid_t auid, uid;
 	kgid_t gid;
@@ -2753,6 +2753,11 @@ static void audit_log_abend(struct audit
 	audit_log_task_context(ab);
 	audit_log_format(ab, " pid=%d comm=", current->pid);
 	audit_log_untrustedstring(ab, current->comm);
+}
+
+static void audit_log_abend(struct audit_buffer *ab, char *reason, long signr)
+{
+	audit_log_task(ab);
 	audit_log_format(ab, " reason=");
 	audit_log_string(ab, reason);
 	audit_log_format(ab, " sig=%ld", signr);
@@ -2783,8 +2788,11 @@ void __audit_seccomp(unsigned long sysca
 {
 	struct audit_buffer *ab;
 
-	ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_ANOM_ABEND);
-	audit_log_abend(ab, "seccomp", signr);
+	ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_SECCOMP);
+	if (unlikely(!ab))
+		return;
+	audit_log_task(ab);
+	audit_log_format(ab, " sig=%ld", signr);
 	audit_log_format(ab, " syscall=%ld", syscall);
 	audit_log_format(ab, " compat=%d", is_compat_task());
 	audit_log_format(ab, " ip=0x%lx", KSTK_EIP(current));

[ 103/221] xen/netfront: improve truesize tracking

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Campbell <Ian.Campbell@citrix.com>

commit d9a58a782e396a0f04e8445b7ba3763c8a48c7fe upstream.

Using RX_COPY_THRESHOLD is incorrect if the SKB is actually smaller
than that. We have already accounted for this in
NETFRONT_SKB_CB(skb)->pull_to so use that instead.

Fixes WARN_ON from skb_try_coalesce.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: annie li <annie.li@oracle.com>
Cc: xen-devel@lists.xen.org
Cc: netdev@vger.kernel.org
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/xen-netfront.c |   27 ++++-----------------------
 1 file changed, 4 insertions(+), 23 deletions(-)

--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1015,29 +1015,10 @@ err:
 		i = xennet_fill_frags(np, skb, &tmpq);
 
 		/*
-		 * Truesize approximates the size of true data plus
-		 * any supervisor overheads. Adding hypervisor
-		 * overheads has been shown to significantly reduce
-		 * achievable bandwidth with the default receive
-		 * buffer size. It is therefore not wise to account
-		 * for it here.
-		 *
-		 * After alloc_skb(RX_COPY_THRESHOLD), truesize is set
-		 * to RX_COPY_THRESHOLD + the supervisor
-		 * overheads. Here, we add the size of the data pulled
-		 * in xennet_fill_frags().
-		 *
-		 * We also adjust for any unused space in the main
-		 * data area by subtracting (RX_COPY_THRESHOLD -
-		 * len). This is especially important with drivers
-		 * which split incoming packets into header and data,
-		 * using only 66 bytes of the main data area (see the
-		 * e1000 driver for example.)  On such systems,
-		 * without this last adjustement, our achievable
-		 * receive throughout using the standard receive
-		 * buffer size was cut by 25%(!!!).
-		 */
-		skb->truesize += skb->data_len - RX_COPY_THRESHOLD;
+                 * Truesize is the actual allocation size, even if the
+                 * allocation is only partially used.
+                 */
+		skb->truesize += PAGE_SIZE * skb_shinfo(skb)->nr_frags;
 		skb->len += skb->data_len;
 
 		if (rx->flags & XEN_NETRXF_csum_blank)

[ 104/221] cpuidle / coupled: fix ready counter decrement

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sivaram Nair <sivaramn@nvidia.com>

commit 92638e2facc5330475c7d558acec77721c3214e4 upstream.

The ready_waiting_counts atomic variable is compared against the wrong
online cpu count. The latter is computed incorrectly using logical-OR
instead of bit-OR. This patch fixes that.

Signed-off-by: Sivaram Nair <sivaramn@nvidia.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpuidle/coupled.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/cpuidle/coupled.c
+++ b/drivers/cpuidle/coupled.c
@@ -209,7 +209,7 @@ inline int cpuidle_coupled_set_not_ready
 	int all;
 	int ret;
 
-	all = coupled->online_count || (coupled->online_count << WAITING_BITS);
+	all = coupled->online_count | (coupled->online_count << WAITING_BITS);
 	ret = atomic_add_unless(&coupled->ready_waiting_counts,
 		-MAX_WAITING_CPUS, all);
 

[ 105/221] brcmfmac: fix parsing rsn ie for ap mode.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hante Meuleman <meuleman@broadcom.com>

commit 619c5a9ad54e6bbdafd16d1cdc6c049403710540 upstream.

RSN IEs got incorrectly parsed and therefore ap mode using WPA2
security was not working.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -3730,10 +3730,11 @@ brcmf_configure_wpaie(struct net_device
 
 	len = wpa_ie->len + TLV_HDR_LEN;
 	data = (u8 *)wpa_ie;
-	offset = 0;
+	offset = TLV_HDR_LEN;
 	if (!is_rsn_ie)
 		offset += VS_IE_FIXED_HDR_LEN;
-	offset += WPA_IE_VERSION_LEN;
+	else
+		offset += WPA_IE_VERSION_LEN;
 
 	/* check for multicast cipher suite */
 	if (offset + WPA_IE_MIN_OUI_LEN > len) {

[ 106/221] video: mxsfb: fix crash when unblanking the display

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lothar Waßmann <LW@KARO-electronics.de>

commit 6c1ecba8d84841277d68140ef485335d5be28485 upstream.

The VDCTRL4 register does not provide the MXS SET/CLR/TOGGLE feature.
The write in mxsfb_disable_controller() sets the data_cnt for the LCD
DMA to 0 which obviously means the max. count for the LCD DMA and
leads to overwriting arbitrary memory when the display is unblanked.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Juergen Beisert <jbe@pengutronix.de>
Tested-by: Lauri Hintsala <lauri.hintsala@bluegiga.net>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/mxsfb.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -369,7 +369,8 @@ static void mxsfb_disable_controller(str
 		loop--;
 	}
 
-	writel(VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4 + REG_CLR);
+	reg = readl(host->base + LCDC_VDCTRL4);
+	writel(reg & ~VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4);
 
 	clk_disable_unprepare(host->clk);
 

[ 107/221] samsung-laptop: Add quirk for broken acpi_video backlight on N250P

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seth Forshee <seth.forshee@canonical.com>

commit e04c200f1f2de8eaa2f5af6d97e7e213a1abb424 upstream.

BugLink: http://bugs.launchpad.net/bugs/1086921
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/x86/samsung-laptop.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -1523,6 +1523,16 @@ static struct dmi_system_id __initdata s
 		},
 	 .driver_data = &samsung_broken_acpi_video,
 	},
+	{
+	 .callback = samsung_dmi_matched,
+	 .ident = "N250P",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "N250P"),
+		DMI_MATCH(DMI_BOARD_NAME, "N250P"),
+		},
+	 .driver_data = &samsung_broken_acpi_video,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(dmi, samsung_dmi_table);

[ 108/221] PM: Move disabling/enabling runtime PM to late suspend/early resume

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

commit 9f6d8f6ab26b42620a914d67f29822f9bba90233 upstream.

Currently, the PM core disables runtime PM for all devices right
after executing subsystem/driver .suspend() callbacks for them
and re-enables it right before executing subsystem/driver .resume()
callbacks for them.  This may lead to problems when there are
two devices such that the .suspend() callback executed for one of
them depends on runtime PM working for the other.  In that case,
if runtime PM has already been disabled for the second device,
the first one's .suspend() won't work correctly (and analogously
for resume).

To make those issues go away, make the PM core disable runtime PM
for devices right before executing subsystem/driver .suspend_late()
callbacks for them and enable runtime PM for them right after
executing subsystem/driver .resume_early() callbacks for them.  This
way the potential conflitcs between .suspend_late()/.resume_early()
and their runtime PM counterparts are still prevented from happening,
but the subtle ordering issues related to disabling/enabling runtime
PM for devices during system suspend/resume are much easier to avoid.

Reported-and-tested-by: Jan-Matthias Braun <jan_braun@gmx.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/power/runtime_pm.txt |    9 +++++----
 drivers/base/power/main.c          |    9 ++++-----
 2 files changed, 9 insertions(+), 9 deletions(-)

--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -642,12 +642,13 @@ out the following operations:
   * During system suspend it calls pm_runtime_get_noresume() and
     pm_runtime_barrier() for every device right before executing the
     subsystem-level .suspend() callback for it.  In addition to that it calls
-    pm_runtime_disable() for every device right after executing the
-    subsystem-level .suspend() callback for it.
+    __pm_runtime_disable() with 'false' as the second argument for every device
+    right before executing the subsystem-level .suspend_late() callback for it.
 
   * During system resume it calls pm_runtime_enable() and pm_runtime_put_sync()
-    for every device right before and right after executing the subsystem-level
-    .resume() callback for it, respectively.
+    for every device right after executing the subsystem-level .resume_early()
+    callback and right after executing the subsystem-level .resume() callback
+    for it, respectively.
 
 7. Generic subsystem callbacks
 
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -513,6 +513,8 @@ static int device_resume_early(struct de
 
  Out:
 	TRACE_RESUME(error);
+
+	pm_runtime_enable(dev);
 	return error;
 }
 
@@ -589,8 +591,6 @@ static int device_resume(struct device *
 	if (!dev->power.is_suspended)
 		goto Unlock;
 
-	pm_runtime_enable(dev);
-
 	if (dev->pm_domain) {
 		info = "power domain ";
 		callback = pm_op(&dev->pm_domain->ops, state);
@@ -930,6 +930,8 @@ static int device_suspend_late(struct de
 	pm_callback_t callback = NULL;
 	char *info = NULL;
 
+	__pm_runtime_disable(dev, false);
+
 	if (dev->power.syscore)
 		return 0;
 
@@ -1133,11 +1135,8 @@ static int __device_suspend(struct devic
 
  Complete:
 	complete_all(&dev->power.completion);
-
 	if (error)
 		async_error = error;
-	else if (dev->power.is_suspended)
-		__pm_runtime_disable(dev, false);
 
 	return error;
 }

[ 109/221] ext4: fix extent tree corruption caused by hole punch

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Forrest Liu <forrestl@synology.com>

commit c36575e663e302dbaa4d16b9c72d2c9a913a9aef upstream.

When depth of extent tree is greater than 1, logical start value of
interior node is not correctly updated in ext4_ext_rm_idx.

Signed-off-by: Forrest Liu <forrestl@synology.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Ashish Sangwan <ashishsangwan2@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/extents.c |   22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2190,13 +2190,14 @@ errout:
  * removes index from the index block.
  */
 static int ext4_ext_rm_idx(handle_t *handle, struct inode *inode,
-			struct ext4_ext_path *path)
+			struct ext4_ext_path *path, int depth)
 {
 	int err;
 	ext4_fsblk_t leaf;
 
 	/* free index block */
-	path--;
+	depth--;
+	path = path + depth;
 	leaf = ext4_idx_pblock(path->p_idx);
 	if (unlikely(path->p_hdr->eh_entries == 0)) {
 		EXT4_ERROR_INODE(inode, "path->p_hdr->eh_entries == 0");
@@ -2221,6 +2222,19 @@ static int ext4_ext_rm_idx(handle_t *han
 
 	ext4_free_blocks(handle, inode, NULL, leaf, 1,
 			 EXT4_FREE_BLOCKS_METADATA | EXT4_FREE_BLOCKS_FORGET);
+
+	while (--depth >= 0) {
+		if (path->p_idx != EXT_FIRST_INDEX(path->p_hdr))
+			break;
+		path--;
+		err = ext4_ext_get_access(handle, inode, path);
+		if (err)
+			break;
+		path->p_idx->ei_block = (path+1)->p_idx->ei_block;
+		err = ext4_ext_dirty(handle, inode, path);
+		if (err)
+			break;
+	}
 	return err;
 }
 
@@ -2557,7 +2571,7 @@ ext4_ext_rm_leaf(handle_t *handle, struc
 	/* if this leaf is free, then we should
 	 * remove it from index block above */
 	if (err == 0 && eh->eh_entries == 0 && path[depth].p_bh != NULL)
-		err = ext4_ext_rm_idx(handle, inode, path + depth);
+		err = ext4_ext_rm_idx(handle, inode, path, depth);
 
 out:
 	return err;
@@ -2760,7 +2774,7 @@ again:
 				/* index is empty, remove it;
 				 * handle must be already prepared by the
 				 * truncatei_leaf() */
-				err = ext4_ext_rm_idx(handle, inode, path + i);
+				err = ext4_ext_rm_idx(handle, inode, path, i);
 			}
 			/* root level has p_bh == NULL, brelse() eats this */
 			brelse(path[i].p_bh);

[ 110/221] ext4: check dioread_nolock on remount

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 261cb20cb2f0737a247aaf08dff7eb065e3e5b66 upstream.

Currently we allow enabling dioread_nolock mount option on remount for
filesystems where blocksize < PAGE_CACHE_SIZE.  This isn't really
supported so fix the bug by moving the check for blocksize !=
PAGE_CACHE_SIZE into parse_options(). Change the original PAGE_SIZE to
PAGE_CACHE_SIZE along the way because that's what we are really
interested in.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1650,9 +1650,7 @@ static int parse_options(char *options,
 			 unsigned int *journal_ioprio,
 			 int is_remount)
 {
-#ifdef CONFIG_QUOTA
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
-#endif
 	char *p;
 	substring_t args[MAX_OPT_ARGS];
 	int token;
@@ -1701,6 +1699,16 @@ static int parse_options(char *options,
 		}
 	}
 #endif
+	if (test_opt(sb, DIOREAD_NOLOCK)) {
+		int blocksize =
+			BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size);
+
+		if (blocksize < PAGE_CACHE_SIZE) {
+			ext4_msg(sb, KERN_ERR, "can't mount with "
+				 "dioread_nolock if block size != PAGE_SIZE");
+			return 0;
+		}
+	}
 	return 1;
 }
 
@@ -3446,15 +3454,6 @@ static int ext4_fill_super(struct super_
 			clear_opt(sb, DELALLOC);
 	}
 
-	blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
-	if (test_opt(sb, DIOREAD_NOLOCK)) {
-		if (blocksize < PAGE_SIZE) {
-			ext4_msg(sb, KERN_ERR, "can't mount with "
-				 "dioread_nolock if block size != PAGE_SIZE");
-			goto failed_mount;
-		}
-	}
-
 	sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
 		(test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0);
 
@@ -3496,6 +3495,7 @@ static int ext4_fill_super(struct super_
 	if (!ext4_feature_set_ok(sb, (sb->s_flags & MS_RDONLY)))
 		goto failed_mount;
 
+	blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
 	if (blocksize < EXT4_MIN_BLOCK_SIZE ||
 	    blocksize > EXT4_MAX_BLOCK_SIZE) {
 		ext4_msg(sb, KERN_ERR,

[ 111/221] jbd2: fix assertion failure in jbd2_journal_flush()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit d7961c7fa4d2e3c3f12be67e21ba8799b5a7238a upstream.

The following race is possible between start_this_handle() and someone
calling jbd2_journal_flush().

Process A                              Process B
start_this_handle().
  if (journal->j_barrier_count) # false
  if (!journal->j_running_transaction) { #true
    read_unlock(&journal->j_state_lock);
                                       jbd2_journal_lock_updates()
                                       jbd2_journal_flush()
                                         write_lock(&journal->j_state_lock);
                                         if (journal->j_running_transaction) {
                                           # false
                                         ... wait for committing trans ...
                                         write_unlock(&journal->j_state_lock);
    ...
    write_lock(&journal->j_state_lock);
    if (!journal->j_running_transaction) { # true
      jbd2_get_transaction(journal, new_transaction);
    write_unlock(&journal->j_state_lock);
    goto repeat; # eventually blocks on j_barrier_count > 0
                                         ...
                                         J_ASSERT(!journal->j_running_transaction);
                                           # fails

We fix the race by rechecking j_barrier_count after reacquiring j_state_lock
in exclusive mode.

Reported-by: yjwsignal@empal.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/jbd2/transaction.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -209,7 +209,8 @@ repeat:
 		if (!new_transaction)
 			goto alloc_transaction;
 		write_lock(&journal->j_state_lock);
-		if (!journal->j_running_transaction) {
+		if (!journal->j_running_transaction &&
+		    !journal->j_barrier_count) {
 			jbd2_get_transaction(journal, new_transaction);
 			new_transaction = NULL;
 		}

[ 112/221] ext4: do not try to write superblock on ro remount w/o journal

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Tokarev <mjt@tls.msk.ru>

commit d096ad0f79a782935d2e06ae8fb235e8c5397775 upstream.

When a journal-less ext4 filesystem is mounted on a read-only block
device (blockdev --setro will do), each remount (for other, unrelated,
flags, like suid=>nosuid etc) results in a series of scary messages
from kernel telling about I/O errors on the device.

This is becauese of the following code ext4_remount():

       if (sbi->s_journal == NULL)
                ext4_commit_super(sb, 1);

at the end of remount procedure, which forces writing (flushing) of
a superblock regardless whenever it is dirty or not, if the filesystem
is readonly or not, and whenever the device itself is readonly or not.

We only need call ext4_commit_super when the file system had been
previously mounted read/write.

Thanks to Eric Sandeen for help in diagnosing this issue.

Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4729,7 +4729,7 @@ static int ext4_remount(struct super_blo
 	}
 
 	ext4_setup_system_zone(sb);
-	if (sbi->s_journal == NULL)
+	if (sbi->s_journal == NULL && !(old_sb_flags & MS_RDONLY))
 		ext4_commit_super(sb, 1);
 
 #ifdef CONFIG_QUOTA

[ 113/221] ext4: lock i_mutex when truncating orphan inodes

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 721e3eba21e43532e438652dd8f1fcdfce3187e7 upstream.

Commit c278531d39 added a warning when ext4_flush_unwritten_io() is
called without i_mutex being taken.  It had previously not been taken
during orphan cleanup since races weren't possible at that point in
the mount process, but as a result of this c278531d39, we will now see
a kernel WARN_ON in this case.  Take the i_mutex in
ext4_orphan_cleanup() to suppress this warning.

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/super.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2225,7 +2225,9 @@ static void ext4_orphan_cleanup(struct s
 				__func__, inode->i_ino, inode->i_size);
 			jbd_debug(2, "truncating inode %lu to %lld bytes\n",
 				  inode->i_ino, inode->i_size);
+			mutex_lock(&inode->i_mutex);
 			ext4_truncate(inode);
+			mutex_unlock(&inode->i_mutex);
 			nr_truncates++;
 		} else {
 			ext4_msg(sb, KERN_DEBUG,

[ 114/221] ext4: avoid hang when mounting non-journal filesystems with orphan list

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 0e9a9a1ad619e7e987815d20262d36a2f95717ca upstream.

When trying to mount a file system which does not contain a journal,
but which does have a orphan list containing an inode which needs to
be truncated, the mount call with hang forever in
ext4_orphan_cleanup() because ext4_orphan_del() will return
immediately without removing the inode from the orphan list, leading
to an uninterruptible loop in kernel code which will busy out one of
the CPU's on the system.

This can be trivially reproduced by trying to mount the file system
found in tests/f_orphan_extents_inode/image.gz from the e2fsprogs
source tree.  If a malicious user were to put this on a USB stick, and
mount it on a Linux desktop which has automatic mounts enabled, this
could be considered a potential denial of service attack.  (Not a big
deal in practice, but professional paranoids worry about such things,
and have even been known to allocate CVE numbers for such problems.)

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/namei.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -2498,7 +2498,8 @@ int ext4_orphan_del(handle_t *handle, st
 	struct ext4_iloc iloc;
 	int err = 0;
 
-	if (!EXT4_SB(inode->i_sb)->s_journal)
+	if ((!EXT4_SB(inode->i_sb)->s_journal) &&
+	    !(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_ORPHAN_FS))
 		return 0;
 
 	mutex_lock(&EXT4_SB(inode->i_sb)->s_orphan_lock);

[ 115/221] ext4: release buffer in failed path in dx_probe()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guo Chao <yan@linux.vnet.ibm.com>

commit 0ecaef0644973e9006fdbc6974301047aaff9bc6 upstream.

If checksum fails, we should also release the buffer
read from previous iteration.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: "Darrick J. Wong" <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/namei.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -725,7 +725,7 @@ dx_probe(const struct qstr *d_name, stru
 			ext4_warning(dir->i_sb, "Node failed checksum");
 			brelse(bh);
 			*err = ERR_BAD_DX_DIR;
-			goto fail;
+			goto fail2;
 		}
 		set_buffer_verified(bh);
 

[ 116/221] aoe: remove vestigial request queue allocation

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ed Cashin <ecashin@coraid.com>

commit 0a41409c518083133e79015092585d68915865be upstream.

Before the aoe driver was an I/O request handler, it was a
make_request-style block driver.  Even so, there was a problem where
sysfs expected a request queue to exist, so one was provided in commit
7135a71b19be ("aoe: allocate unused request_queue for sysfs").

During the transition to the request-handler style, a patch was merged
that was based on a driver without the noop queue, and the noop queue
remained in place after the patch was merged, even though a new
functional queue was introduced by the patch, allocated through
blk_init_queue.

The user impact is a memory leak proportional to the number of AoE
targets discovered.  This patch removes the memory leak and cleans up
vestiges of the old do-nothing queue from the aoeblk_gdalloc function.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/aoe/aoeblk.c |   17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -231,18 +231,12 @@ aoeblk_gdalloc(void *vp)
 	if (q == NULL) {
 		pr_err("aoe: cannot allocate block queue for %ld.%d\n",
 			d->aoemajor, d->aoeminor);
-		mempool_destroy(mp);
-		goto err_disk;
+		goto err_mempool;
 	}
 
-	d->blkq = blk_alloc_queue(GFP_KERNEL);
-	if (!d->blkq)
-		goto err_mempool;
-	d->blkq->backing_dev_info.name = "aoe";
-	if (bdi_init(&d->blkq->backing_dev_info))
-		goto err_blkq;
 	spin_lock_irqsave(&d->lock, flags);
-	blk_queue_max_hw_sectors(d->blkq, BLK_DEF_MAX_SECTORS);
+	blk_queue_max_hw_sectors(q, BLK_DEF_MAX_SECTORS);
+	q->backing_dev_info.name = "aoe";
 	q->backing_dev_info.ra_pages = READ_AHEAD / PAGE_CACHE_SIZE;
 	d->bufpool = mp;
 	d->blkq = gd->queue = q;
@@ -265,11 +259,8 @@ aoeblk_gdalloc(void *vp)
 	aoedisk_add_sysfs(d);
 	return;
 
-err_blkq:
-	blk_cleanup_queue(d->blkq);
-	d->blkq = NULL;
 err_mempool:
-	mempool_destroy(d->bufpool);
+	mempool_destroy(mp);
 err_disk:
 	put_disk(gd);
 err:

[ 117/221] udf: fix memory leak while allocating blocks during write

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <namjae.jeon@samsung.com>

commit 2fb7d99d0de3fd8ae869f35ab682581d8455887a upstream.

Need to brelse the buffer_head stored in cur_epos and next_epos.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/udf/inode.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -765,6 +765,8 @@ static sector_t inode_getblk(struct inod
 				goal, err);
 		if (!newblocknum) {
 			brelse(prev_epos.bh);
+			brelse(cur_epos.bh);
+			brelse(next_epos.bh);
 			*err = -ENOSPC;
 			return 0;
 		}
@@ -795,6 +797,8 @@ static sector_t inode_getblk(struct inod
 	udf_update_extents(inode, laarr, startnum, endnum, &prev_epos);
 
 	brelse(prev_epos.bh);
+	brelse(cur_epos.bh);
+	brelse(next_epos.bh);
 
 	newblock = udf_get_pblock(inode->i_sb, newblocknum,
 				iinfo->i_location.partitionReferenceNum, 0);

[ 118/221] udf: dont increment lenExtents while writing to a hole

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <namjae.jeon@samsung.com>

commit fb719c59bdb4fca86ee1fd1f42ab3735ca12b6b2 upstream.

Incrementing lenExtents even while writing to a hole is bad
for performance as calls to udf_discard_prealloc and
udf_truncate_tail_extent would not return from start if
isize != lenExtents

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/udf/inode.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -601,6 +601,7 @@ static sector_t inode_getblk(struct inod
 	struct udf_inode_info *iinfo = UDF_I(inode);
 	int goal = 0, pgoal = iinfo->i_location.logicalBlockNum;
 	int lastblock = 0;
+	bool isBeyondEOF;
 
 	*err = 0;
 	*new = 0;
@@ -680,7 +681,7 @@ static sector_t inode_getblk(struct inod
 	/* Are we beyond EOF? */
 	if (etype == -1) {
 		int ret;
-
+		isBeyondEOF = 1;
 		if (count) {
 			if (c)
 				laarr[0] = laarr[1];
@@ -723,6 +724,7 @@ static sector_t inode_getblk(struct inod
 		endnum = c + 1;
 		lastblock = 1;
 	} else {
+		isBeyondEOF = 0;
 		endnum = startnum = ((count > 2) ? 2 : count);
 
 		/* if the current extent is in position 0,
@@ -770,7 +772,8 @@ static sector_t inode_getblk(struct inod
 			*err = -ENOSPC;
 			return 0;
 		}
-		iinfo->i_lenExtents += inode->i_sb->s_blocksize;
+		if (isBeyondEOF)
+			iinfo->i_lenExtents += inode->i_sb->s_blocksize;
 	}
 
 	/* if the extent the requsted block is located in contains multiple

[ 119/221] ACPI : do not use Lid and Sleep button for S5 wakeup

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Rui <rui.zhang@intel.com>

commit b7e383046c2c7c13ad928cd7407eafff758ddd4b upstream.

When system enters power off, the _PSW of Lid device is enabled.
But this may cause the system to reboot instead of power off.

A proper way to fix this is to always disable lid wakeup capability for S5.

References: https://bugzilla.kernel.org/show_bug.cgi?id=35262
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/scan.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -859,8 +859,8 @@ acpi_bus_extract_wakeup_device_power_pac
 static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
 {
 	struct acpi_device_id button_device_ids[] = {
-		{"PNP0C0D", 0},
 		{"PNP0C0C", 0},
+		{"PNP0C0D", 0},
 		{"PNP0C0E", 0},
 		{"", 0},
 	};
@@ -872,6 +872,11 @@ static void acpi_bus_set_run_wake_flags(
 	/* Power button, Lid switch always enable wakeup */
 	if (!acpi_match_device_ids(device, button_device_ids)) {
 		device->wakeup.flags.run_wake = 1;
+		if (!acpi_match_device_ids(device, &button_device_ids[1])) {
+			/* Do not use Lid/sleep button for S5 wakeup */
+			if (device->wakeup.sleep_state == ACPI_STATE_S5)
+				device->wakeup.sleep_state = ACPI_STATE_S4;
+		}
 		device_set_wakeup_capable(&device->dev, true);
 		return;
 	}

[ 120/221] regmap: debugfs: Avoid overflows for very small reads

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit db04328c167ff8e7c57f4a3532214aeada3a82fd upstream.

If count is less than the size of a register then we may hit integer
wraparound when trying to move backwards to check if we're still in
the buffer. Instead move the position forwards to check if it's still
in the buffer, we are unlikely to be able to allocate a buffer
sufficiently big to overflow here.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

---
 drivers/base/regmap/regmap-debugfs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/base/regmap/regmap-debugfs.c
+++ b/drivers/base/regmap/regmap-debugfs.c
@@ -90,7 +90,7 @@ static ssize_t regmap_map_read_file(stru
 		/* If we're in the region the user is trying to read */
 		if (p >= *ppos) {
 			/* ...but not beyond it */
-			if (buf_pos >= count - 1 - tot_len)
+			if (buf_pos + 1 + tot_len >= count)
 				break;
 
 			/* Format the register */

[ 121/221] epoll: prevent missed events on EPOLL_CTL_MOD

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Wong <normalperson@yhbt.net>

commit 128dd1759d96ad36c379240f8b9463e8acfd37a1 upstream.

EPOLL_CTL_MOD sets the interest mask before calling f_op->poll() to
ensure events are not missed.  Since the modifications to the interest
mask are not protected by the same lock as ep_poll_callback, we need to
ensure the change is visible to other CPUs calling ep_poll_callback.

We also need to ensure f_op->poll() has an up-to-date view of past
events which occured before we modified the interest mask.  So this
barrier also pairs with the barrier in wq_has_sleeper().

This should guarantee either ep_poll_callback or f_op->poll() (or both)
will notice the readiness of a recently-ready/modified item.

This issue was encountered by Andreas Voellmy and Junchang(Jason) Wang in:
http://thread.gmane.org/gmane.linux.kernel/1408782/

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Voellmy <andreas.voellmy@yale.edu>
Tested-by: "Junchang(Jason) Wang" <junchang.wang@yale.edu>
Cc: netdev@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/eventpoll.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1285,7 +1285,7 @@ static int ep_modify(struct eventpoll *e
 	 * otherwise we might miss an event that happens between the
 	 * f_op->poll() call and the new event set registering.
 	 */
-	epi->event.events = event->events;
+	epi->event.events = event->events; /* need barrier below */
 	pt._key = event->events;
 	epi->event.data = event->data; /* protected by mtx */
 	if (epi->event.events & EPOLLWAKEUP) {
@@ -1296,6 +1296,26 @@ static int ep_modify(struct eventpoll *e
 	}
 
 	/*
+	 * The following barrier has two effects:
+	 *
+	 * 1) Flush epi changes above to other CPUs.  This ensures
+	 *    we do not miss events from ep_poll_callback if an
+	 *    event occurs immediately after we call f_op->poll().
+	 *    We need this because we did not take ep->lock while
+	 *    changing epi above (but ep_poll_callback does take
+	 *    ep->lock).
+	 *
+	 * 2) We also need to ensure we do not miss _past_ events
+	 *    when calling f_op->poll().  This barrier also
+	 *    pairs with the barrier in wq_has_sleeper (see
+	 *    comments for wq_has_sleeper).
+	 *
+	 * This barrier will now guarantee ep_poll_callback or f_op->poll
+	 * (or both) will notice the readiness of an item.
+	 */
+	smp_mb();
+
+	/*
 	 * Get current event bits. We can safely use the file* here because
 	 * its usage count has been increased by the caller of this function.
 	 */

[ 122/221] HID: add quirk for Freescale i.MX23 ROM recovery

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Vasut <marex@denx.de>

commit 436136cec650d661eb662fcb508a99878606d050 upstream.

The USB recovery mode present in i.MX23 ROM emulates USB HID.  It needs this
quirk to behave properly.

Even if the official branding of the chip is Freescale i.MX23, I named it
Sigmatel STMP3780 since that's what the chip really is and it even reports
itself as STMP3780.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/hid-ids.h           |    3 +++
 drivers/hid/usbhid/hid-quirks.c |    1 +
 2 files changed, 4 insertions(+)

--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -696,6 +696,9 @@
 #define USB_VENDOR_ID_SIGMA_MICRO	0x1c4f
 #define USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD	0x0002
 
+#define USB_VENDOR_ID_SIGMATEL		0x066F
+#define USB_DEVICE_ID_SIGMATEL_STMP3780	0x3780
+
 #define USB_VENDOR_ID_SKYCABLE			0x1223
 #define	USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER	0x3F07
 
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -79,6 +79,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_SIGMATEL, USB_DEVICE_ID_SIGMATEL_STMP3780, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_1, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_2, HID_QUIRK_NOGET },

[ 123/221] ASoC: arizona: Correct FLL source definitions

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit a8c02db029385fb4426e0396e108ab23cd08f384 upstream.

The FLL source constants were numbered as a simple enumeration but were
being used in the code as direct values to be written to the registers.
Renumber the constants to reflect the usage.

Reported-by: Ryo Tsutsui <Ryo.Tsutsui@wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/arizona.h |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/sound/soc/codecs/arizona.h
+++ b/sound/soc/codecs/arizona.h
@@ -32,15 +32,15 @@
 
 #define ARIZONA_FLL_SRC_MCLK1      0
 #define ARIZONA_FLL_SRC_MCLK2      1
-#define ARIZONA_FLL_SRC_SLIMCLK    2
-#define ARIZONA_FLL_SRC_FLL1       3
-#define ARIZONA_FLL_SRC_FLL2       4
-#define ARIZONA_FLL_SRC_AIF1BCLK   5
-#define ARIZONA_FLL_SRC_AIF2BCLK   6
-#define ARIZONA_FLL_SRC_AIF3BCLK   7
-#define ARIZONA_FLL_SRC_AIF1LRCLK  8
-#define ARIZONA_FLL_SRC_AIF2LRCLK  9
-#define ARIZONA_FLL_SRC_AIF3LRCLK 10
+#define ARIZONA_FLL_SRC_SLIMCLK    3
+#define ARIZONA_FLL_SRC_FLL1       4
+#define ARIZONA_FLL_SRC_FLL2       5
+#define ARIZONA_FLL_SRC_AIF1BCLK   8
+#define ARIZONA_FLL_SRC_AIF2BCLK   9
+#define ARIZONA_FLL_SRC_AIF3BCLK  10
+#define ARIZONA_FLL_SRC_AIF1LRCLK 12
+#define ARIZONA_FLL_SRC_AIF2LRCLK 13
+#define ARIZONA_FLL_SRC_AIF3LRCLK 14
 
 #define ARIZONA_MIXER_VOL_MASK             0x00FE
 #define ARIZONA_MIXER_VOL_SHIFT                 1

[ 124/221] ASoC: arizona: Do proper shift for setting AIF rate

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@ingics.com>

commit 7110a287ff2b1f3780905d1686a1a4edccb95133 upstream.

ARIZONA_AIF1_RATE_MASK is 0x7800 /* AIF1_RATE - [14:11] */
Thus we need left shift ARIZONA_AIF1_RATE_SHIFT when setting aif1 rate.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/arizona.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/soc/codecs/arizona.c
+++ b/sound/soc/codecs/arizona.c
@@ -677,7 +677,8 @@ static int arizona_hw_params(struct snd_
 		snd_soc_update_bits(codec, ARIZONA_ASYNC_SAMPLE_RATE_1,
 				    ARIZONA_ASYNC_SAMPLE_RATE_MASK, sr_val);
 		snd_soc_update_bits(codec, base + ARIZONA_AIF_RATE_CTRL,
-				    ARIZONA_AIF1_RATE_MASK, 8);
+				    ARIZONA_AIF1_RATE_MASK,
+				    8 << ARIZONA_AIF1_RATE_SHIFT);
 		break;
 	default:
 		arizona_aif_err(dai, "Invalid clock %d\n", dai_priv->clk);

[ 125/221] ASoC: arizona: Remove DSP B and left justified AIF modes

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit d71753e22b24548911b377db28f80870cf50d07b upstream.

These are not supported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/arizona.c |    6 ------
 1 file changed, 6 deletions(-)

--- a/sound/soc/codecs/arizona.c
+++ b/sound/soc/codecs/arizona.c
@@ -409,15 +409,9 @@ static int arizona_set_fmt(struct snd_so
 	case SND_SOC_DAIFMT_DSP_A:
 		mode = 0;
 		break;
-	case SND_SOC_DAIFMT_DSP_B:
-		mode = 1;
-		break;
 	case SND_SOC_DAIFMT_I2S:
 		mode = 2;
 		break;
-	case SND_SOC_DAIFMT_LEFT_J:
-		mode = 3;
-		break;
 	default:
 		arizona_aif_err(dai, "Unsupported DAI format %d\n",
 				fmt & SND_SOC_DAIFMT_FORMAT_MASK);

[ 126/221] ASoC: wm2000: Fix sense of speech clarity enable

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit 267f8fa2e1eef0612b2007e1f1846bcbc35cc1fa upstream.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/wm2000.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/soc/codecs/wm2000.c
+++ b/sound/soc/codecs/wm2000.c
@@ -209,9 +209,9 @@ static int wm2000_power_up(struct i2c_cl
 
 	ret = wm2000_read(i2c, WM2000_REG_SPEECH_CLARITY);
 	if (wm2000->speech_clarity)
-		ret &= ~WM2000_SPEECH_CLARITY;
-	else
 		ret |= WM2000_SPEECH_CLARITY;
+	else
+		ret &= ~WM2000_SPEECH_CLARITY;
 	wm2000_write(i2c, WM2000_REG_SPEECH_CLARITY, ret);
 
 	wm2000_write(i2c, WM2000_REG_SYS_START0, 0x33);

[ 127/221] ASoC: wm2200: Fix setting dai format in wm2200_set_fmt

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@ingics.com>

commit 2a5f431592343b78896013b055582f94c12a5049 upstream.

According to the defines in wm2200.h:
/*
 * R1284 (0x504) - Audio IF 1_5
 */

We should not left shift 1 bit for fmt_val when setting dai format.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/wm2200.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/codecs/wm2200.c
+++ b/sound/soc/codecs/wm2200.c
@@ -1440,7 +1440,7 @@ static int wm2200_set_fmt(struct snd_soc
 			    WM2200_AIF1TX_LRCLK_MSTR | WM2200_AIF1TX_LRCLK_INV,
 			    lrclk);
 	snd_soc_update_bits(codec, WM2200_AUDIO_IF_1_5,
-			    WM2200_AIF1_FMT_MASK << 1, fmt_val << 1);
+			    WM2200_AIF1_FMT_MASK, fmt_val);
 
 	return 0;
 }

[ 128/221] ASoC: wm2200: Remove DSP B and left justified AIF modes

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit 0cc411b934c4317b363d1af993549f391852b980 upstream.

These are not supported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/wm2200.c |    6 ------
 1 file changed, 6 deletions(-)

--- a/sound/soc/codecs/wm2200.c
+++ b/sound/soc/codecs/wm2200.c
@@ -1380,15 +1380,9 @@ static int wm2200_set_fmt(struct snd_soc
 	case SND_SOC_DAIFMT_DSP_A:
 		fmt_val = 0;
 		break;
-	case SND_SOC_DAIFMT_DSP_B:
-		fmt_val = 1;
-		break;
 	case SND_SOC_DAIFMT_I2S:
 		fmt_val = 2;
 		break;
-	case SND_SOC_DAIFMT_LEFT_J:
-		fmt_val = 3;
-		break;
 	default:
 		dev_err(codec->dev, "Unsupported DAI format %d\n",
 			fmt & SND_SOC_DAIFMT_FORMAT_MASK);

[ 129/221] ASoC: sta529: Fix update register bits in sta529_set_dai_fmt

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@ingics.com>

commit ad1937cdd59c412097ec2bb8f38c12a5640f1f9a upstream.

Both the mask and mode settings are wrong in current code.

According to the datasheet:

S2PCFG0 (0x0A)
BIT[3:1] DATA_FORMAT
        serial interface protocol format:
        000: left Justified
        001: I2S (default)
        010: right justified
        100: PCM no delay
        101: PCM delay
        111: DSP

Thus fixes the defines for LEFT_J_DATA_FORMAT, I2S_DATA_FORMAT, and
RIGHT_J_DATA_FORMAT.
Also adds define for DATA_FORMAT_MSK.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/sta529.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/sound/soc/codecs/sta529.c
+++ b/sound/soc/codecs/sta529.c
@@ -74,9 +74,10 @@
 				SNDRV_PCM_FMTBIT_S32_LE)
 #define	S2PC_VALUE		0x98
 #define CLOCK_OUT		0x60
-#define LEFT_J_DATA_FORMAT	0x10
-#define I2S_DATA_FORMAT		0x12
-#define RIGHT_J_DATA_FORMAT	0x14
+#define DATA_FORMAT_MSK		0x0E
+#define LEFT_J_DATA_FORMAT	0x00
+#define I2S_DATA_FORMAT		0x02
+#define RIGHT_J_DATA_FORMAT	0x04
 #define CODEC_MUTE_VAL		0x80
 
 #define POWER_CNTLMSAK		0x40
@@ -289,7 +290,7 @@ static int sta529_set_dai_fmt(struct snd
 		return -EINVAL;
 	}
 
-	snd_soc_update_bits(codec, STA529_S2PCFG0, 0x0D, mode);
+	snd_soc_update_bits(codec, STA529_S2PCFG0, DATA_FORMAT_MSK, mode);
 
 	return 0;
 }

[ 130/221] ASoC: pcm: allow backend hardware to be freed in pause state

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrick Lai <plai@codeaurora.org>

commit 08b27848da620f206a8b6d80f26184485dd7aa40 upstream.

When front-end PCM session is in paused state, back-end
PCM session will be put in paused state as well if given
front-end PCM session is the only client of given back-end.
Then, application closes front-end PCM session, DPCM
framework will not allow back-end enters HW_FREE state
so back-end will never get shutdown completely.

Signed-off-by: Patrick Lai <plai@codeaurora.org>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/soc-pcm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -1240,6 +1240,7 @@ static int dpcm_be_dai_hw_free(struct sn
 		if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_HW_PARAMS) &&
 		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PREPARE) &&
 		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_HW_FREE) &&
+		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED) &&
 		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP))
 			continue;
 

[ 131/221] ASoC: wm5100: Remove DSP B and left justified formats

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit 5f960294e2031d12f10c8488c3446fecbf59628d upstream.

These are not supported

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/wm5100.c |    6 ------
 1 file changed, 6 deletions(-)

--- a/sound/soc/codecs/wm5100.c
+++ b/sound/soc/codecs/wm5100.c
@@ -1279,15 +1279,9 @@ static int wm5100_set_fmt(struct snd_soc
 	case SND_SOC_DAIFMT_DSP_A:
 		mask = 0;
 		break;
-	case SND_SOC_DAIFMT_DSP_B:
-		mask = 1;
-		break;
 	case SND_SOC_DAIFMT_I2S:
 		mask = 2;
 		break;
-	case SND_SOC_DAIFMT_LEFT_J:
-		mask = 3;
-		break;
 	default:
 		dev_err(codec->dev, "Unsupported DAI format %d\n",
 			fmt & SND_SOC_DAIFMT_FORMAT_MASK);

[ 132/221] udldrmfb: Fix EDID not working with monitors with EDID extension blocks

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit c930812fe5ebe725760422c9c351d1f6fde1502d upstream.

udldrmfb only reads the main EDID block, and if that advertises extensions
the drm_edid code expects them to be present, and starts reading beyond the
buffer udldrmfb passes it.

Although it may be possible to read more EDID info with the udl we simpy don't
know how, and even if trial and error gets it working on one device, that is
no guarantee it will work on other revisions. So this patch does a simple fix
in the form of patching the EDID info to report 0 extension blocks, this
fixes udldrmfb only doing 1024x768 on monitors with EDID extension blocks.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/udl/udl_connector.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/gpu/drm/udl/udl_connector.c
+++ b/drivers/gpu/drm/udl/udl_connector.c
@@ -57,6 +57,14 @@ static int udl_get_modes(struct drm_conn
 
 	edid = (struct edid *)udl_get_edid(udl);
 
+	/*
+	 * We only read the main block, but if the monitor reports extension
+	 * blocks then the drm edid code expects them to be present, so patch
+	 * the extension count to 0.
+	 */
+	edid->checksum += edid->extensions;
+	edid->extensions = 0;
+
 	drm_mode_connector_update_edid_property(connector, edid);
 	ret = drm_add_edid_modes(connector, edid);
 	kfree(edid);

[ 133/221] udldrmfb: udl_get_edid: usb_control_msg buffer must not be on the stack

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 242187b362555849e8c971dfbbfd55f8bd9fa717 upstream.

The buffer passed to usb_control_msg may end up in scatter-gather list, and
may thus not be on the stack. Having it on the stack usually works on x86, but
not on other archs.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/udl/udl_connector.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/udl/udl_connector.c
+++ b/drivers/gpu/drm/udl/udl_connector.c
@@ -22,13 +22,17 @@
 static u8 *udl_get_edid(struct udl_device *udl)
 {
 	u8 *block;
-	char rbuf[3];
+	char *rbuf;
 	int ret, i;
 
 	block = kmalloc(EDID_LENGTH, GFP_KERNEL);
 	if (block == NULL)
 		return NULL;
 
+	rbuf = kmalloc(2, GFP_KERNEL);
+	if (rbuf == NULL)
+		goto error;
+
 	for (i = 0; i < EDID_LENGTH; i++) {
 		ret = usb_control_msg(udl->ddev->usbdev,
 				      usb_rcvctrlpipe(udl->ddev->usbdev, 0), (0x02),
@@ -42,10 +46,12 @@ static u8 *udl_get_edid(struct udl_devic
 		block[i] = rbuf[1];
 	}
 
+	kfree(rbuf);
 	return block;
 
 error:
 	kfree(block);
+	kfree(rbuf);
 	return NULL;
 }
 

[ 134/221] udldrmfb: udl_get_edid: drop unneeded i--

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 7b4cf994e4c6ba48872bb25253cc393b7fb74c82 upstream.

This is a left-over from when udl_get_edid returned the amount of bytes
successfully read, which it no longer does.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/udl/udl_connector.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/gpu/drm/udl/udl_connector.c
+++ b/drivers/gpu/drm/udl/udl_connector.c
@@ -40,7 +40,6 @@ static u8 *udl_get_edid(struct udl_devic
 				      HZ);
 		if (ret < 1) {
 			DRM_ERROR("Read EDID byte %d failed err %x\n", i, ret);
-			i--;
 			goto error;
 		}
 		block[i] = rbuf[1];

[ 135/221] vfs: add missing virtual cache flush after editing partial pages

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 6d283dba3721cc43be014b50a1acc2f35860a65a upstream.

Andrew Morton pointed this out a month ago, and then I completely forgot
about it.

If we read a partial last page of a block device, we will zero out the
end of the page, but since that page can then be mapped into user space,
we should also make sure to flush the cache on architectures that have
virtual caches.  We have the flush_dcache_page() function for this, so
use it.

Now, in practice this really never matters, because nobody sane uses
virtual caches to begin with, and they largely exist on old broken RISC
arhitectures.

And even if you did run on one of those obsolete CPU's, the whole "mmap
and access the last partial page of a block device" behavior probably
doesn't actually exist.  The normal IO functions (read/write) will never
see the zeroed-out part of the page that migth not be coherent in the
cache, because they honor the size of the device.

So I'm marking this for stable (3.7 only), but I'm not sure anybody will
ever care.

Pointed-out-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/buffer.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2939,6 +2939,7 @@ static void guard_bh_eod(int rw, struct
 		void *kaddr = kmap_atomic(bh->b_page);
 		memset(kaddr + bh_offset(bh) + bytes, 0, bh->b_size - bytes);
 		kunmap_atomic(kaddr);
+		flush_dcache_page(bh->b_page);
 	}
 }
 

[ 136/221] Revert "ALSA: hda - Shut up pins at power-saving mode with Conexnat codecs"

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Henningsson <david.henningsson@canonical.com>

commit 7ed4165e2d01bdbbb4c1086eb73eadf0f64cbbf0 upstream.

This reverts commit 697c373e34613609cb5450f98b91fefb6e910588.

The original patch was meant to remove clicking, but in fact caused even
more clicking instead.

Thanks to c4pp4 for doing most of the work with this bug.

BugLink: https://bugs.launchpad.net/bugs/886975
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_conexant.c |   16 ----------------
 1 file changed, 16 deletions(-)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -553,24 +553,12 @@ static int conexant_build_controls(struc
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int conexant_suspend(struct hda_codec *codec)
-{
-	snd_hda_shutup_pins(codec);
-	return 0;
-}
-#endif
-
 static const struct hda_codec_ops conexant_patch_ops = {
 	.build_controls = conexant_build_controls,
 	.build_pcms = conexant_build_pcms,
 	.init = conexant_init,
 	.free = conexant_free,
 	.set_power_state = conexant_set_power,
-#ifdef CONFIG_PM
-	.suspend = conexant_suspend,
-#endif
-	.reboot_notify = snd_hda_shutup_pins,
 };
 
 #ifdef CONFIG_SND_HDA_INPUT_BEEP
@@ -4393,10 +4381,6 @@ static const struct hda_codec_ops cx_aut
 	.init = cx_auto_init,
 	.free = conexant_free,
 	.unsol_event = snd_hda_jack_unsol_event,
-#ifdef CONFIG_PM
-	.suspend = conexant_suspend,
-#endif
-	.reboot_notify = snd_hda_shutup_pins,
 };
 
 /*

[ 137/221] ALSA: hda - Disable runtime D3 for Intel CPT & co

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit d7dab4dbbb2d1b0c903378d6bade2e4ae161804e upstream.

We've got a few bug reports that the runtime D3 results in the dead
HD-audio controller.  It seems that the problem is in a deeper level
than the sound driver itself, so as a temporal solution, disable the
feature for these controllers again.

Reported-and-tested-by: Vincent Blut <vincent.debian@free.fr>
Reported-and-tested-by: Maurizio Avogadro <mavoga@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_intel.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -559,9 +559,12 @@ enum {
 #define AZX_DCAPS_PM_RUNTIME	(1 << 26)	/* runtime PM support */
 
 /* quirks for Intel PCH */
-#define AZX_DCAPS_INTEL_PCH \
+#define AZX_DCAPS_INTEL_PCH_NOPM \
 	(AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \
-	 AZX_DCAPS_COUNT_LPIB_DELAY | AZX_DCAPS_PM_RUNTIME)
+	 AZX_DCAPS_COUNT_LPIB_DELAY)
+
+#define AZX_DCAPS_INTEL_PCH \
+	(AZX_DCAPS_INTEL_PCH_NOPM | AZX_DCAPS_PM_RUNTIME)
 
 /* quirks for ATI SB / AMD Hudson */
 #define AZX_DCAPS_PRESET_ATI_SB \
@@ -3448,13 +3451,13 @@ static void __devexit azx_remove(struct
 static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
 	/* CPT */
 	{ PCI_DEVICE(0x8086, 0x1c20),
-	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
+	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
 	/* PBG */
 	{ PCI_DEVICE(0x8086, 0x1d20),
-	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
+	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
 	/* Panther Point */
 	{ PCI_DEVICE(0x8086, 0x1e20),
-	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
+	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
 	/* Lynx Point */
 	{ PCI_DEVICE(0x8086, 0x8c20),
 	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },

[ 138/221] ALSA: pxa27x: fix ac97 cold reset

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Dunn <mikedunn@newsguy.com>

commit 41b645c8624df6ace020a8863ad1449d69140f7d upstream.

Cold reset on the pxa27x currently fails and

     pxa2xx_ac97_try_cold_reset: cold reset timeout (GSR=0x44)

appears in the kernel log.  Through trial-and-error (the pxa270 developer's
manual is mostly incoherent on the topic of ac97 reset), I got cold reset to
complete by setting the WARM_RST bit in the GCR register (and later noticed that
pxa3xx does this for cold reset as well).  Also, a timeout loop is needed to
wait for the reset to complete.

Tested on a palm treo 680 machine.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/arm/pxa2xx-ac97-lib.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -148,6 +148,8 @@ static inline void pxa_ac97_warm_pxa27x(
 
 static inline void pxa_ac97_cold_pxa27x(void)
 {
+	unsigned int timeout;
+
 	GCR &=  GCR_COLD_RST;  /* clear everything but nCRST */
 	GCR &= ~GCR_COLD_RST;  /* then assert nCRST */
 
@@ -157,8 +159,10 @@ static inline void pxa_ac97_cold_pxa27x(
 	clk_enable(ac97conf_clk);
 	udelay(5);
 	clk_disable(ac97conf_clk);
-	GCR = GCR_COLD_RST;
-	udelay(50);
+	GCR = GCR_COLD_RST | GCR_WARM_RST;
+	timeout = 100;     /* wait for the codec-ready bit to be set */
+	while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+		mdelay(1);
 }
 #endif
 

[ 139/221] ALSA: pxa27x: fix ac97 warm reset

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Dunn <mikedunn@newsguy.com>

commit 3b4bc7bccc7857274705b05cf81a0c72cfd0b0dd upstream.

This patch fixes some code that implements a work-around to a hardware bug in
the ac97 controller on the pxa27x.  A bug in the controller's warm reset
functionality requires that the mfp used by the controller as the AC97_nRESET
line be temporarily reconfigured as a generic output gpio (AF0) and manually
held high for the duration of the warm reset cycle.  This is what was done in
the original code, but it was broken long ago by commit fb1bf8cd
    ([ARM] pxa: introduce processor specific pxa27x_assert_ac97reset())
which changed the mfp to a GPIO input instead of a high output.

The fix requires the ac97 controller to obtain the gpio via gpio_request_one(),
with arguments that configure the gpio as an output initially driven high.

Tested on a palm treo 680 machine.  Reportedly, this broken code only prevents a
warm reset on hardware that lacks a pull-up on the line, which appears to be the
case for me.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-pxa/include/mach/mfp-pxa27x.h |    3 +++
 arch/arm/mach-pxa/pxa27x.c                  |    4 ++--
 sound/arm/pxa2xx-ac97-lib.c                 |   18 +++++++++++++++++-
 3 files changed, 22 insertions(+), 3 deletions(-)

--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -463,6 +463,9 @@
 	GPIO76_LCD_PCLK,	\
 	GPIO77_LCD_BIAS
 
+/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */
+#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DEFAULT)
+#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DEFAULT)
 
 extern int keypad_set_wake(unsigned int on);
 #endif /* __ASM_ARCH_MFP_PXA27X_H */
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -47,9 +47,9 @@ void pxa27x_clear_otgph(void)
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
 static unsigned long ac97_reset_config[] = {
-	GPIO113_GPIO,
+	GPIO113_AC97_nRESET_GPIO_HIGH,
 	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
+	GPIO95_AC97_nRESET_GPIO_HIGH,
 	GPIO95_AC97_nRESET,
 };
 
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
 #include <sound/ac97_codec.h>
 #include <sound/pxa2xx-lib.h>
@@ -344,8 +345,21 @@ int __devinit pxa2xx_ac97_hw_probe(struc
 	}
 
 	if (cpu_is_pxa27x()) {
-		/* Use GPIO 113 as AC97 Reset on Bulverde */
+		/*
+		 * This gpio is needed for a work-around to a bug in the ac97
+		 * controller during warm reset.  The direction and level is set
+		 * here so that it is an output driven high when switching from
+		 * AC97_nRESET alt function to generic gpio.
+		 */
+		ret = gpio_request_one(reset_gpio, GPIOF_OUT_INIT_HIGH,
+				       "pxa27x ac97 reset");
+		if (ret < 0) {
+			pr_err("%s: gpio_request_one() failed: %d\n",
+			       __func__, ret);
+			goto err_conf;
+		}
 		pxa27x_assert_ac97reset(reset_gpio, 0);
+
 		ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
 		if (IS_ERR(ac97conf_clk)) {
 			ret = PTR_ERR(ac97conf_clk);
@@ -388,6 +402,8 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_probe);
 
 void pxa2xx_ac97_hw_remove(struct platform_device *dev)
 {
+	if (cpu_is_pxa27x())
+		gpio_free(reset_gpio);
 	GCR |= GCR_ACLINK_OFF;
 	free_irq(IRQ_AC97, NULL);
 	if (ac97conf_clk) {

[ 140/221] staging: comedi: prevent auto-unconfig of manually configured devices

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@mev.co.uk>

commit 7d3135af399e92cf4c9bbc5f86b6c140aab3b88c upstream.

When a low-level comedi driver auto-configures a device, a `struct
comedi_dev_file_info` is allocated (as well as a `struct
comedi_device`) by `comedi_alloc_board_minor()`.  A pointer to the
hardware `struct device` is stored as a cookie in the `struct
comedi_dev_file_info`.  When the low-level comedi driver
auto-unconfigures the device, `comedi_auto_unconfig()` uses the cookie
to find the `struct comedi_dev_file_info` so it can detach the comedi
device from the driver, clean it up and free it.

A problem arises if the user manually unconfigures and reconfigures the
comedi device using the `COMEDI_DEVCONFIG` ioctl so that is no longer
associated with the original hardware device.  The problem is that the
cookie is not cleared, so that a call to `comedi_auto_unconfig()` from
the low-level driver will still find it, detach it, clean it up and free
it.

Stop this problem occurring by always clearing the `hardware_device`
cookie in the `struct comedi_dev_file_info` whenever the
`COMEDI_DEVCONFIG` ioctl call is successful.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/comedi_fops.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -1546,6 +1546,9 @@ static long comedi_unlocked_ioctl(struct
 	if (cmd == COMEDI_DEVCONFIG) {
 		rc = do_devconfig_ioctl(dev,
 					(struct comedi_devconfig __user *)arg);
+		if (rc == 0)
+			/* Evade comedi_auto_unconfig(). */
+			dev_file_info->hardware_device = NULL;
 		goto done;
 	}
 

[ 141/221] staging: comedi: fix minimum AO period for NI 625x and NI 628x

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Éric Piel <piel@delmic.com>

commit 34b55d8c48f4f76044d8f4d6ec3dc786cf210312 upstream.

The minimum period was set to 357 ns, while the divider for these boards is 50
ns. This prevented to output at maximum speed as ni_ao_cmdtest() would return
357 but would not accept it.

Not sure why it was set to 357 ns (this was done before the git history,
which starts 5 years ago). My guess is that it comes from reading the
specification stating a 2.8 MHz rate (~ 357 ns). The latest
specification states a 2.86 MHz rate (~ 350 ns), which makes a lot
more sense.

Tested on a pci-6251.

Signed-off-by: Éric Piel <piel@delmic.com>
Acked-By: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/ni_pcimio.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/staging/comedi/drivers/ni_pcimio.c
+++ b/drivers/staging/comedi/drivers/ni_pcimio.c
@@ -963,7 +963,7 @@ static const struct ni_board_struct ni_b
 	 .ao_range_table = &range_ni_M_625x_ao,
 	 .reg_type = ni_reg_625x,
 	 .ao_unipolar = 0,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 8,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -982,7 +982,7 @@ static const struct ni_board_struct ni_b
 	 .ao_range_table = &range_ni_M_625x_ao,
 	 .reg_type = ni_reg_625x,
 	 .ao_unipolar = 0,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 8,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -1001,7 +1001,7 @@ static const struct ni_board_struct ni_b
 	 .ao_range_table = &range_ni_M_625x_ao,
 	 .reg_type = ni_reg_625x,
 	 .ao_unipolar = 0,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 8,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -1037,7 +1037,7 @@ static const struct ni_board_struct ni_b
 	 .ao_range_table = &range_ni_M_625x_ao,
 	 .reg_type = ni_reg_625x,
 	 .ao_unipolar = 0,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 32,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -1056,7 +1056,7 @@ static const struct ni_board_struct ni_b
 	 .ao_range_table = &range_ni_M_625x_ao,
 	 .reg_type = ni_reg_625x,
 	 .ao_unipolar = 0,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 32,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -1092,7 +1092,7 @@ static const struct ni_board_struct ni_b
 	 .ao_range_table = &range_ni_M_628x_ao,
 	 .reg_type = ni_reg_628x,
 	 .ao_unipolar = 1,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 8,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -1111,7 +1111,7 @@ static const struct ni_board_struct ni_b
 	 .ao_range_table = &range_ni_M_628x_ao,
 	 .reg_type = ni_reg_628x,
 	 .ao_unipolar = 1,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 8,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,
@@ -1147,7 +1147,7 @@ static const struct ni_board_struct ni_b
 	 .ao_range_table = &range_ni_M_628x_ao,
 	 .reg_type = ni_reg_628x,
 	 .ao_unipolar = 1,
-	 .ao_speed = 357,
+	 .ao_speed = 350,
 	 .num_p0_dio_channels = 32,
 	 .caldac = {caldac_none},
 	 .has_8255 = 0,

[ 142/221] staging: comedi: Kconfig: COMEDI_NI_AT_A2150 should select COMEDI_FC

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@mev.co.uk>

commit 34ffb33e09132401872fe79e95c30824ce194d23 upstream.

The 'ni_at_a2150' module links to `cfc_write_to_buffer` in the
'comedi_fc' module, so selecting 'COMEDI_NI_AT_A2150' in the kernel config
needs to also select 'COMEDI_FC'.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -444,6 +444,7 @@ config COMEDI_ADQ12B
 
 config COMEDI_NI_AT_A2150
 	tristate "NI AT-A2150 ISA card support"
+	select COMEDI_FC
 	depends on VIRT_TO_BUS
 	---help---
 	  Enable support for National Instruments AT-A2150 cards

[ 143/221] staging: comedi: comedi_test: fix race when cancelling command

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@mev.co.uk>

commit c0729eeefdcd76db338f635162bf0739fd2c5f6f upstream.

Éric Piel reported a kernel oops in the "comedi_test" module.  It was a
NULL pointer dereference within `waveform_ai_interrupt()` (actually a
timer function) that sometimes occurred when a running asynchronous
command is cancelled (either by the `COMEDI_CANCEL` ioctl or by closing
the device file).

This seems to be a race between the caller of `waveform_ai_cancel()`
which on return from that function goes and tears down the running
command, and the timer function which uses the command.  In particular,
`async->cmd.chanlist` gets freed (and the pointer set to NULL) by
`do_become_nonbusy()` in "comedi_fops.c" but a previously scheduled
`waveform_ai_interrupt()` timer function will dereference that pointer
regardless, leading to the oops.

Fix it by replacing the `del_timer()` call in `waveform_ai_cancel()`
with `del_timer_sync()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Éric Piel <piel@delmic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/comedi_test.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/comedi/drivers/comedi_test.c
+++ b/drivers/staging/comedi/drivers/comedi_test.c
@@ -372,7 +372,7 @@ static int waveform_ai_cancel(struct com
 	struct waveform_private *devpriv = dev->private;
 
 	devpriv->timer_running = 0;
-	del_timer(&devpriv->timer);
+	del_timer_sync(&devpriv->timer);
 	return 0;
 }
 

[ 144/221] staging: r8712u: Add new device ID

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit da849a92d3bafaf24d770e971c2c9e5c3f60b5d1 upstream.

The ISY IWL 1000 USB WLAN stick with USB ID 050d:11f1 is a clone of
the Belkin F7D1101 V1 device.

Reported-by: Thomas Hartmann <hartmann@ict.tuwien.ac.at>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Thomas Hartmann <hartmann@ict.tuwien.ac.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/rtl8712/usb_intf.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -63,6 +63,8 @@ static struct usb_device_id rtl871x_usb_
 	{USB_DEVICE(0x0B05, 0x1791)}, /* 11n mode disable */
 	/* Belkin */
 	{USB_DEVICE(0x050D, 0x945A)},
+	/* ISY IWL - Belkin clone */
+	{USB_DEVICE(0x050D, 0x11F1)},
 	/* Corega */
 	{USB_DEVICE(0x07AA, 0x0047)},
 	/* D-Link */

[ 145/221] staging: speakup: avoid out-of-range access in synth_init()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nickolai Zeldovich <nickolai@csail.mit.edu>

commit ae428655b826f2755a8101b27beda42a275ef8ad upstream.

Check that array index is in-bounds before accessing the synths[] array.

Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/speakup/synth.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/speakup/synth.c
+++ b/drivers/staging/speakup/synth.c
@@ -342,7 +342,7 @@ int synth_init(char *synth_name)
 
 	mutex_lock(&spk_mutex);
 	/* First, check if we already have it loaded. */
-	for (i = 0; synths[i] != NULL && i < MAXSYNTHS; i++)
+	for (i = 0; i < MAXSYNTHS && synths[i] != NULL; i++)
 		if (strcmp(synths[i]->name, synth_name) == 0)
 			synth = synths[i];
 

[ 146/221] staging: speakup: avoid out-of-range access in synth_add()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Samuel Thibault <samuel.thibault@ens-lyon.org>

commit 6102c48bd421074a33e102f2ebda3724e8d275f9 upstream.

Check that array index is in-bounds before accessing the synths[] array.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Nickolai Zeldovich <nickolai@csail.mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/speakup/synth.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/speakup/synth.c
+++ b/drivers/staging/speakup/synth.c
@@ -423,7 +423,7 @@ int synth_add(struct spk_synth *in_synth
 	int i;
 	int status = 0;
 	mutex_lock(&spk_mutex);
-	for (i = 0; synths[i] != NULL && i < MAXSYNTHS; i++)
+	for (i = 0; i < MAXSYNTHS && synths[i] != NULL; i++)
 		/* synth_remove() is responsible for rotating the array down */
 		if (in_synth == synths[i]) {
 			mutex_unlock(&spk_mutex);

[ 147/221] staging: zram: factor-out zram_decompress_page() function

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>

commit 37b51fdddf64e7ba0971d070428655f8d6f36578 upstream.

zram_bvec_read() shared decompress functionality with zram_read_before_write() function.
Factor-out and make commonly used zram_decompress_page() function, which also simplified
error handling in zram_bvec_read().

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/zram/zram_drv.c |  113 ++++++++++++++++------------------------
 1 file changed, 48 insertions(+), 65 deletions(-)

--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -183,62 +183,25 @@ static inline int is_partial_io(struct b
 	return bvec->bv_len != PAGE_SIZE;
 }
 
-static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec,
-			  u32 index, int offset, struct bio *bio)
+static int zram_decompress_page(struct zram *zram, char *mem, u32 index)
 {
-	int ret;
-	size_t clen;
-	struct page *page;
-	unsigned char *user_mem, *cmem, *uncmem = NULL;
-
-	page = bvec->bv_page;
-
-	if (zram_test_flag(zram, index, ZRAM_ZERO)) {
-		handle_zero_page(bvec);
-		return 0;
-	}
+	int ret = LZO_E_OK;
+	size_t clen = PAGE_SIZE;
+	unsigned char *cmem;
+	unsigned long handle = zram->table[index].handle;
 
-	/* Requested page is not present in compressed area */
-	if (unlikely(!zram->table[index].handle)) {
-		pr_debug("Read before write: sector=%lu, size=%u",
-			 (ulong)(bio->bi_sector), bio->bi_size);
-		handle_zero_page(bvec);
+	if (!handle || zram_test_flag(zram, index, ZRAM_ZERO)) {
+		memset(mem, 0, PAGE_SIZE);
 		return 0;
 	}
 
-	if (is_partial_io(bvec)) {
-		/* Use  a temporary buffer to decompress the page */
-		uncmem = kmalloc(PAGE_SIZE, GFP_KERNEL);
-		if (!uncmem) {
-			pr_info("Error allocating temp memory!\n");
-			return -ENOMEM;
-		}
-	}
-
-	user_mem = kmap_atomic(page);
-	if (!is_partial_io(bvec))
-		uncmem = user_mem;
-	clen = PAGE_SIZE;
-
-	cmem = zs_map_object(zram->mem_pool, zram->table[index].handle,
-				ZS_MM_RO);
-
-	if (zram->table[index].size == PAGE_SIZE) {
-		memcpy(uncmem, cmem, PAGE_SIZE);
-		ret = LZO_E_OK;
-	} else {
+	cmem = zs_map_object(zram->mem_pool, handle, ZS_MM_RO);
+	if (zram->table[index].size == PAGE_SIZE)
+		memcpy(mem, cmem, PAGE_SIZE);
+	else
 		ret = lzo1x_decompress_safe(cmem, zram->table[index].size,
-				    uncmem, &clen);
-	}
-
-	if (is_partial_io(bvec)) {
-		memcpy(user_mem + bvec->bv_offset, uncmem + offset,
-		       bvec->bv_len);
-		kfree(uncmem);
-	}
-
-	zs_unmap_object(zram->mem_pool, zram->table[index].handle);
-	kunmap_atomic(user_mem);
+						mem, &clen);
+	zs_unmap_object(zram->mem_pool, handle);
 
 	/* Should NEVER happen. Return bio error if it does. */
 	if (unlikely(ret != LZO_E_OK)) {
@@ -247,36 +210,56 @@ static int zram_bvec_read(struct zram *z
 		return ret;
 	}
 
-	flush_dcache_page(page);
-
 	return 0;
 }
 
-static int zram_read_before_write(struct zram *zram, char *mem, u32 index)
+static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec,
+			  u32 index, int offset, struct bio *bio)
 {
 	int ret;
-	size_t clen = PAGE_SIZE;
-	unsigned char *cmem;
-	unsigned long handle = zram->table[index].handle;
+	struct page *page;
+	unsigned char *user_mem, *uncmem = NULL;
 
-	if (zram_test_flag(zram, index, ZRAM_ZERO) || !handle) {
-		memset(mem, 0, PAGE_SIZE);
+	page = bvec->bv_page;
+
+	if (unlikely(!zram->table[index].handle) ||
+			zram_test_flag(zram, index, ZRAM_ZERO)) {
+		handle_zero_page(bvec);
 		return 0;
 	}
 
-	cmem = zs_map_object(zram->mem_pool, handle, ZS_MM_RO);
-	ret = lzo1x_decompress_safe(cmem, zram->table[index].size,
-				    mem, &clen);
-	zs_unmap_object(zram->mem_pool, handle);
+	user_mem = kmap_atomic(page);
+	if (is_partial_io(bvec))
+		/* Use  a temporary buffer to decompress the page */
+		uncmem = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	else
+		uncmem = user_mem;
+
+	if (!uncmem) {
+		pr_info("Unable to allocate temp memory\n");
+		ret = -ENOMEM;
+		goto out_cleanup;
+	}
 
+	ret = zram_decompress_page(zram, uncmem, index);
 	/* Should NEVER happen. Return bio error if it does. */
 	if (unlikely(ret != LZO_E_OK)) {
 		pr_err("Decompression failed! err=%d, page=%u\n", ret, index);
 		zram_stat64_inc(zram, &zram->stats.failed_reads);
-		return ret;
+		goto out_cleanup;
 	}
 
-	return 0;
+	if (is_partial_io(bvec))
+		memcpy(user_mem + bvec->bv_offset, uncmem + offset,
+				bvec->bv_len);
+
+	flush_dcache_page(page);
+	ret = 0;
+out_cleanup:
+	kunmap_atomic(user_mem);
+	if (is_partial_io(bvec))
+		kfree(uncmem);
+	return ret;
 }
 
 static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
@@ -302,7 +285,7 @@ static int zram_bvec_write(struct zram *
 			ret = -ENOMEM;
 			goto out;
 		}
-		ret = zram_read_before_write(zram, uncmem, index);
+		ret = zram_decompress_page(zram, uncmem, index);
 		if (ret) {
 			kfree(uncmem);
 			goto out;

[ 148/221] staging: zram: fix invalid memory references during disk write

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nitin Gupta <ngupta@vflare.org>

commit 397c60668aa5ae7130b5ad4e73870d7b8a787085 upstream.

Fixes a bug introduced by commit c8f2f0db1 ("zram: Fix handling
of incompressible pages") which caused invalid memory references
during disk write. Invalid references could occur in two cases:
 - Incoming data expands on compression: In this case, reference was
made to kunmap()'ed bio page.
 - Partial (non PAGE_SIZE) write with incompressible data: In this
case, reference was made to a kfree()'ed buffer.

Fixes bug 50081:
https://bugzilla.kernel.org/show_bug.cgi?id=50081

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Reported-by: Mihail Kasadjikov <hamer.mk@gmail.com>
Reported-by: Tomas M <tomas@slax.org>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/zram/zram_drv.c |   39 ++++++++++++++++++++++++---------------
 1 file changed, 24 insertions(+), 15 deletions(-)

--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -265,7 +265,7 @@ out_cleanup:
 static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
 			   int offset)
 {
-	int ret;
+	int ret = 0;
 	size_t clen;
 	unsigned long handle;
 	struct page *page;
@@ -286,10 +286,8 @@ static int zram_bvec_write(struct zram *
 			goto out;
 		}
 		ret = zram_decompress_page(zram, uncmem, index);
-		if (ret) {
-			kfree(uncmem);
+		if (ret)
 			goto out;
-		}
 	}
 
 	/*
@@ -302,16 +300,18 @@ static int zram_bvec_write(struct zram *
 
 	user_mem = kmap_atomic(page);
 
-	if (is_partial_io(bvec))
+	if (is_partial_io(bvec)) {
 		memcpy(uncmem + offset, user_mem + bvec->bv_offset,
 		       bvec->bv_len);
-	else
+		kunmap_atomic(user_mem);
+		user_mem = NULL;
+	} else {
 		uncmem = user_mem;
+	}
 
 	if (page_zero_filled(uncmem)) {
-		kunmap_atomic(user_mem);
-		if (is_partial_io(bvec))
-			kfree(uncmem);
+		if (!is_partial_io(bvec))
+			kunmap_atomic(user_mem);
 		zram_stat_inc(&zram->stats.pages_zero);
 		zram_set_flag(zram, index, ZRAM_ZERO);
 		ret = 0;
@@ -321,9 +321,11 @@ static int zram_bvec_write(struct zram *
 	ret = lzo1x_1_compress(uncmem, PAGE_SIZE, src, &clen,
 			       zram->compress_workmem);
 
-	kunmap_atomic(user_mem);
-	if (is_partial_io(bvec))
-			kfree(uncmem);
+	if (!is_partial_io(bvec)) {
+		kunmap_atomic(user_mem);
+		user_mem = NULL;
+		uncmem = NULL;
+	}
 
 	if (unlikely(ret != LZO_E_OK)) {
 		pr_err("Compression failed! err=%d\n", ret);
@@ -332,8 +334,10 @@ static int zram_bvec_write(struct zram *
 
 	if (unlikely(clen > max_zpage_size)) {
 		zram_stat_inc(&zram->stats.bad_compress);
-		src = uncmem;
 		clen = PAGE_SIZE;
+		src = NULL;
+		if (is_partial_io(bvec))
+			src = uncmem;
 	}
 
 	handle = zs_malloc(zram->mem_pool, clen);
@@ -345,7 +349,11 @@ static int zram_bvec_write(struct zram *
 	}
 	cmem = zs_map_object(zram->mem_pool, handle, ZS_MM_WO);
 
+	if ((clen == PAGE_SIZE) && !is_partial_io(bvec))
+		src = kmap_atomic(page);
 	memcpy(cmem, src, clen);
+	if ((clen == PAGE_SIZE) && !is_partial_io(bvec))
+		kunmap_atomic(src);
 
 	zs_unmap_object(zram->mem_pool, handle);
 
@@ -358,9 +366,10 @@ static int zram_bvec_write(struct zram *
 	if (clen <= PAGE_SIZE / 2)
 		zram_stat_inc(&zram->stats.good_compress);
 
-	return 0;
-
 out:
+	if (is_partial_io(bvec))
+		kfree(uncmem);
+
 	if (ret)
 		zram_stat64_inc(zram, &zram->stats.failed_writes);
 	return ret;

[ 149/221] radeon/kms: force rn50 chip to always report connected on analog output

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Glisse <jglisse@redhat.com>

commit 51861d4eebc2ddc25c77084343d060fa79f6e291 upstream.

Those rn50 chip are often connected to console remoting hw and load
detection often fails with those. Just don't try to load detect and
report connect.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_legacy_encoders.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -640,6 +640,14 @@ static enum drm_connector_status radeon_
 	enum drm_connector_status found = connector_status_disconnected;
 	bool color = true;
 
+	/* just don't bother on RN50 those chip are often connected to remoting
+	 * console hw and often we get failure to load detect those. So to make
+	 * everyone happy report the encoder as always connected.
+	 */
+	if (ASIC_IS_RN50(rdev)) {
+		return connector_status_connected;
+	}
+
 	/* save the regs we need */
 	vclk_ecp_cntl = RREG32_PLL(RADEON_VCLK_ECP_CNTL);
 	crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);

[ 150/221] iwlwifi: fix PCIe interrupt handle return value

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit 392d4cad7907f6cb4ffc85e135a01abfddc89027 upstream.

By accident, commit eb6476441bc2fecf6232a87d0313a85f8e3da7f4
("iwlwifi: protect use_ict with irq_lock") changed the return
value of the iwl_pcie_isr() function in case it handles an
interrupt -- it now returns IRQ_NONE instead of IRQ_HANDLED.

Put back the correct return value.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/pcie/rx.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -971,6 +971,7 @@ static irqreturn_t iwl_isr(int irq, void
 	else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) &&
 		 !trans_pcie->inta)
 		iwl_enable_interrupts(trans);
+	return IRQ_HANDLED;
 
 none:
 	/* re-enable interrupts here since we don't have anything to service. */

[ 151/221] iwlwifi: fix the reclaimed packet tracking upon flush queue

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit f590dcec944552f9a4a61155810f3abd17d6465d upstream.

There's a bug in the currently released firmware version,
the sequence control in the Tx response isn't updated in
all cases. Take it from the packet as a workaround.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/dvm/tx.c |   24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

--- a/drivers/net/wireless/iwlwifi/dvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/dvm/tx.c
@@ -1154,13 +1154,6 @@ int iwlagn_rx_reply_tx(struct iwl_priv *
 			next_reclaimed = ssn;
 		}
 
-		if (tid != IWL_TID_NON_QOS) {
-			priv->tid_data[sta_id][tid].next_reclaimed =
-				next_reclaimed;
-			IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n",
-						  next_reclaimed);
-		}
-
 		iwl_trans_reclaim(priv->trans, txq_id, ssn, &skbs);
 
 		iwlagn_check_ratid_empty(priv, sta_id, tid);
@@ -1211,11 +1204,28 @@ int iwlagn_rx_reply_tx(struct iwl_priv *
 			if (!is_agg)
 				iwlagn_non_agg_tx_status(priv, ctx, hdr->addr1);
 
+			/*
+			 * W/A for FW bug - the seq_ctl isn't updated when the
+			 * queues are flushed. Fetch it from the packet itself
+			 */
+			if (!is_agg && status == TX_STATUS_FAIL_FIFO_FLUSHED) {
+				next_reclaimed = le16_to_cpu(hdr->seq_ctrl);
+				next_reclaimed =
+					SEQ_TO_SN(next_reclaimed + 0x10);
+			}
+
 			is_offchannel_skb =
 				(info->flags & IEEE80211_TX_CTL_TX_OFFCHAN);
 			freed++;
 		}
 
+		if (tid != IWL_TID_NON_QOS) {
+			priv->tid_data[sta_id][tid].next_reclaimed =
+				next_reclaimed;
+			IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n",
+					   next_reclaimed);
+		}
+
 		WARN_ON(!is_agg && freed != 1);
 
 		/*

[ 152/221] mac80211: fix ibss scanning

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislaw Gruszka <sgruszka@redhat.com>

commit 34bcf71502413f8903ade93746f2d0f04b937a78 upstream.

Do not scan on no-IBSS and disabled channels in IBSS mode. Doing this
can trigger Microcode errors on iwlwifi and iwlegacy drivers.

Also rename ieee80211_request_internal_scan() function since it is only
used in IBSS mode and simplify calling it from ieee80211_sta_find_ibss().

This patch should address:
https://bugzilla.redhat.com/show_bug.cgi?id=883414
https://bugzilla.kernel.org/show_bug.cgi?id=49411

Reported-by: Jesse Kahtava <jesse_kahtava@f-m.fm>
Reported-by: Mikko Rapeli  <mikko.rapeli@iki.fi>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac80211/ibss.c        |    9 ++++-----
 net/mac80211/ieee80211_i.h |    6 +++---
 net/mac80211/scan.c        |   34 ++++++++++++++++++++++++----------
 3 files changed, 31 insertions(+), 18 deletions(-)

--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -678,8 +678,8 @@ static void ieee80211_sta_merge_ibss(str
 	sdata_info(sdata,
 		   "No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)\n");
 
-	ieee80211_request_internal_scan(sdata,
-			ifibss->ssid, ifibss->ssid_len, NULL);
+	ieee80211_request_ibss_scan(sdata, ifibss->ssid, ifibss->ssid_len,
+				    NULL);
 }
 
 static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
@@ -777,9 +777,8 @@ static void ieee80211_sta_find_ibss(stru
 					IEEE80211_SCAN_INTERVAL)) {
 		sdata_info(sdata, "Trigger new scan to find an IBSS to join\n");
 
-		ieee80211_request_internal_scan(sdata,
-				ifibss->ssid, ifibss->ssid_len,
-				ifibss->fixed_channel ? ifibss->channel : NULL);
+		ieee80211_request_ibss_scan(sdata, ifibss->ssid,
+					    ifibss->ssid_len, chan);
 	} else {
 		int interval = IEEE80211_SCAN_INTERVAL;
 
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1247,9 +1247,9 @@ void ieee80211_mesh_rx_queued_mgmt(struc
 
 /* scan/BSS handling */
 void ieee80211_scan_work(struct work_struct *work);
-int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
-				    const u8 *ssid, u8 ssid_len,
-				    struct ieee80211_channel *chan);
+int ieee80211_request_ibss_scan(struct ieee80211_sub_if_data *sdata,
+				const u8 *ssid, u8 ssid_len,
+				struct ieee80211_channel *chan);
 int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
 			   struct cfg80211_scan_request *req);
 void ieee80211_scan_cancel(struct ieee80211_local *local);
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -819,9 +819,9 @@ int ieee80211_request_scan(struct ieee80
 	return res;
 }
 
-int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
-				    const u8 *ssid, u8 ssid_len,
-				    struct ieee80211_channel *chan)
+int ieee80211_request_ibss_scan(struct ieee80211_sub_if_data *sdata,
+				const u8 *ssid, u8 ssid_len,
+				struct ieee80211_channel *chan)
 {
 	struct ieee80211_local *local = sdata->local;
 	int ret = -EBUSY;
@@ -835,22 +835,36 @@ int ieee80211_request_internal_scan(stru
 
 	/* fill internal scan request */
 	if (!chan) {
-		int i, nchan = 0;
+		int i, max_n;
+		int n_ch = 0;
 
 		for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 			if (!local->hw.wiphy->bands[band])
 				continue;
-			for (i = 0;
-			     i < local->hw.wiphy->bands[band]->n_channels;
-			     i++) {
-				local->int_scan_req->channels[nchan] =
+
+			max_n = local->hw.wiphy->bands[band]->n_channels;
+			for (i = 0; i < max_n; i++) {
+				struct ieee80211_channel *tmp_ch =
 				    &local->hw.wiphy->bands[band]->channels[i];
-				nchan++;
+
+				if (tmp_ch->flags & (IEEE80211_CHAN_NO_IBSS |
+						     IEEE80211_CHAN_DISABLED))
+					continue;
+
+				local->int_scan_req->channels[n_ch] = tmp_ch;
+				n_ch++;
 			}
 		}
 
-		local->int_scan_req->n_channels = nchan;
+		if (WARN_ON_ONCE(n_ch == 0))
+			goto unlock;
+
+		local->int_scan_req->n_channels = n_ch;
 	} else {
+		if (WARN_ON_ONCE(chan->flags & (IEEE80211_CHAN_NO_IBSS |
+						IEEE80211_CHAN_DISABLED)))
+			goto unlock;
+
 		local->int_scan_req->channels[0] = chan;
 		local->int_scan_req->n_channels = 1;
 	}

[ 153/221] mac80211: fix station destruction in AP/mesh modes

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit 97f97b1f5fe0878b35c8e314f98591771696321b upstream.

Unfortunately, commit b22cfcfcae5b, intended to speed up roaming
by avoiding the synchronize_rcu() broke AP/mesh modes as it moved
some code into that work item that will still call into the driver
at a time where it's no longer expected to handle this: after the
AP or mesh has been stopped.

To fix this problem remove the per-station work struct, maintain a
station cleanup list instead and flush this list when stations are
flushed. To keep this patch smaller for stable, do this when the
stations are flushed (sta_info_flush()). This unfortunately brings
back the original roaming delay; I'll fix that again in a separate
patch.

Also, Ben reported that the original commit could sometimes (with
many interfaces) cause long delays when an interface is set down,
due to blocking on flush_workqueue(). Since we now maintain the
cleanup list, this particular change of the original patch can be
reverted.

Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac80211/ieee80211_i.h |    4 ++++
 net/mac80211/iface.c       |   28 ++++++++++++++++------------
 net/mac80211/sta_info.c    |   44 ++++++++++++++++++++++++++++++++++++++++----
 net/mac80211/sta_info.h    |    3 ++-
 4 files changed, 62 insertions(+), 17 deletions(-)

--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -730,6 +730,10 @@ struct ieee80211_sub_if_data {
 		u32 mntr_flags;
 	} u;
 
+	spinlock_t cleanup_stations_lock;
+	struct list_head cleanup_stations;
+	struct work_struct cleanup_stations_wk;
+
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct {
 		struct dentry *dir;
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -793,20 +793,11 @@ static void ieee80211_do_stop(struct iee
 		flush_work(&sdata->work);
 		/*
 		 * When we get here, the interface is marked down.
-		 * Call rcu_barrier() to wait both for the RX path
+		 * Call synchronize_rcu() to wait for the RX path
 		 * should it be using the interface and enqueuing
-		 * frames at this very time on another CPU, and
-		 * for the sta free call_rcu callbacks.
+		 * frames at this very time on another CPU.
 		 */
-		rcu_barrier();
-
-		/*
-		 * free_sta_rcu() enqueues a work for the actual
-		 * sta cleanup, so we need to flush it while
-		 * sdata is still valid.
-		 */
-		flush_workqueue(local->workqueue);
-
+		synchronize_rcu();
 		skb_queue_purge(&sdata->skb_queue);
 
 		/*
@@ -1432,6 +1423,15 @@ static void ieee80211_assign_perm_addr(s
 	mutex_unlock(&local->iflist_mtx);
 }
 
+static void ieee80211_cleanup_sdata_stas_wk(struct work_struct *wk)
+{
+	struct ieee80211_sub_if_data *sdata;
+
+	sdata = container_of(wk, struct ieee80211_sub_if_data, cleanup_stations_wk);
+
+	ieee80211_cleanup_sdata_stas(sdata);
+}
+
 int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 		     struct wireless_dev **new_wdev, enum nl80211_iftype type,
 		     struct vif_params *params)
@@ -1507,6 +1507,10 @@ int ieee80211_if_add(struct ieee80211_lo
 
 	INIT_LIST_HEAD(&sdata->key_list);
 
+	spin_lock_init(&sdata->cleanup_stations_lock);
+	INIT_LIST_HEAD(&sdata->cleanup_stations);
+	INIT_WORK(&sdata->cleanup_stations_wk, ieee80211_cleanup_sdata_stas_wk);
+
 	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
 		struct ieee80211_supported_band *sband;
 		sband = local->hw.wiphy->bands[i];
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -91,9 +91,8 @@ static int sta_info_hash_del(struct ieee
 	return -ENOENT;
 }
 
-static void free_sta_work(struct work_struct *wk)
+static void cleanup_single_sta(struct sta_info *sta)
 {
-	struct sta_info *sta = container_of(wk, struct sta_info, free_sta_wk);
 	int ac, i;
 	struct tid_ampdu_tx *tid_tx;
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
@@ -148,11 +147,35 @@ static void free_sta_work(struct work_st
 	sta_info_free(local, sta);
 }
 
+void ieee80211_cleanup_sdata_stas(struct ieee80211_sub_if_data *sdata)
+{
+	struct sta_info *sta;
+
+	spin_lock_bh(&sdata->cleanup_stations_lock);
+	while (!list_empty(&sdata->cleanup_stations)) {
+		sta = list_first_entry(&sdata->cleanup_stations,
+				       struct sta_info, list);
+		list_del(&sta->list);
+		spin_unlock_bh(&sdata->cleanup_stations_lock);
+
+		cleanup_single_sta(sta);
+
+		spin_lock_bh(&sdata->cleanup_stations_lock);
+	}
+
+	spin_unlock_bh(&sdata->cleanup_stations_lock);
+}
+
 static void free_sta_rcu(struct rcu_head *h)
 {
 	struct sta_info *sta = container_of(h, struct sta_info, rcu_head);
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
 
-	ieee80211_queue_work(&sta->local->hw, &sta->free_sta_wk);
+	spin_lock(&sdata->cleanup_stations_lock);
+	list_add_tail(&sta->list, &sdata->cleanup_stations);
+	spin_unlock(&sdata->cleanup_stations_lock);
+
+	ieee80211_queue_work(&sdata->local->hw, &sdata->cleanup_stations_wk);
 }
 
 /* protected by RCU */
@@ -305,7 +328,6 @@ struct sta_info *sta_info_alloc(struct i
 
 	spin_lock_init(&sta->lock);
 	INIT_WORK(&sta->drv_unblock_wk, sta_unblock);
-	INIT_WORK(&sta->free_sta_wk, free_sta_work);
 	INIT_WORK(&sta->ampdu_mlme.work, ieee80211_ba_session_work);
 	mutex_init(&sta->ampdu_mlme.mtx);
 
@@ -877,6 +899,20 @@ int sta_info_flush(struct ieee80211_loca
 	}
 	mutex_unlock(&local->sta_mtx);
 
+	rcu_barrier();
+
+	if (sdata) {
+		ieee80211_cleanup_sdata_stas(sdata);
+		cancel_work_sync(&sdata->cleanup_stations_wk);
+	} else {
+		mutex_lock(&local->iflist_mtx);
+		list_for_each_entry(sdata, &local->interfaces, list) {
+			ieee80211_cleanup_sdata_stas(sdata);
+			cancel_work_sync(&sdata->cleanup_stations_wk);
+		}
+		mutex_unlock(&local->iflist_mtx);
+	}
+
 	return ret;
 }
 
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -298,7 +298,6 @@ struct sta_info {
 	spinlock_t lock;
 
 	struct work_struct drv_unblock_wk;
-	struct work_struct free_sta_wk;
 
 	u16 listen_interval;
 
@@ -558,4 +557,6 @@ void ieee80211_sta_ps_deliver_wakeup(str
 void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta);
 void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta);
 
+void ieee80211_cleanup_sdata_stas(struct ieee80211_sub_if_data *sdata);
+
 #endif /* STA_INFO_H */

[ 154/221] mac80211: use del_timer_sync for final sta cleanup timer deletion

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit a56f992cdabc63f56b4b142885deebebf936ff76 upstream.

This is a very old bug, but there's nothing that prevents the
timer from running while the module is being removed when we
only do del_timer() instead of del_timer_sync().

The timer should normally not be running at this point, but
it's not clearly impossible (or we could just remove this.)

Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac80211/sta_info.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -870,7 +870,7 @@ void sta_info_init(struct ieee80211_loca
 
 void sta_info_stop(struct ieee80211_local *local)
 {
-	del_timer(&local->sta_cleanup);
+	del_timer_sync(&local->sta_cleanup);
 	sta_info_flush(local, NULL);
 }
 

[ 155/221] mwifiex: check wait_event_interruptible return value

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bing Zhao <bzhao@marvell.com>

commit 9c969d8ccb1e17bd20742f4ac9f00c1a64487234 upstream.

wait_event_interruptible function returns -ERESTARTSYS if it's
interrupted by a signal. Driver should check the return value
and handle this case properly.

In mwifiex_wait_queue_complete() routine, as we are now checking
wait_event_interruptible return value, the condition check is not
required. Also, we have removed mwifiex_cancel_pending_ioctl()
call to avoid a chance of sending second command to FW by other path
as soon as we clear current command node. FW can not handle two
commands simultaneously.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/mwifiex/sta_ioctl.c |   21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -56,7 +56,6 @@ int mwifiex_copy_mcast_addr(struct mwifi
  */
 int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter)
 {
-	bool cancel_flag = false;
 	int status;
 	struct cmd_ctrl_node *cmd_queued;
 
@@ -70,14 +69,11 @@ int mwifiex_wait_queue_complete(struct m
 	atomic_inc(&adapter->cmd_pending);
 
 	/* Wait for completion */
-	wait_event_interruptible(adapter->cmd_wait_q.wait,
-				 *(cmd_queued->condition));
-	if (!*(cmd_queued->condition))
-		cancel_flag = true;
-
-	if (cancel_flag) {
-		mwifiex_cancel_pending_ioctl(adapter);
-		dev_dbg(adapter->dev, "cmd cancel\n");
+	status = wait_event_interruptible(adapter->cmd_wait_q.wait,
+					  *(cmd_queued->condition));
+	if (status) {
+		dev_err(adapter->dev, "cmd_wait_q terminated: %d\n", status);
+		return status;
 	}
 
 	status = adapter->cmd_wait_q.status;
@@ -480,8 +476,11 @@ int mwifiex_enable_hs(struct mwifiex_ada
 		return false;
 	}
 
-	wait_event_interruptible(adapter->hs_activate_wait_q,
-				 adapter->hs_activate_wait_q_woken);
+	if (wait_event_interruptible(adapter->hs_activate_wait_q,
+				     adapter->hs_activate_wait_q_woken)) {
+		dev_err(adapter->dev, "hs_activate_wait_q terminated\n");
+		return false;
+	}
 
 	return true;
 }

[ 156/221] b43: Fix firmware loading when driver is built into the kernel

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 5e20a4b53094651d80f856ff55a916b999dbb57a upstream.

Recent versions of udev cause synchronous firmware loading from the
probe routine to fail because the request to user space would time
out. The original fix for b43 (commit 6b6fa58) moved the firmware
load from the probe routine to a work queue, but it still used synchronous
firmware loading. This method is OK when b43 is built as a module;
however, it fails when the driver is compiled into the kernel.

This version changes the code to load the initial firmware file
using request_firmware_nowait(). A completion event is used to
hold the work queue until that file is available. This driver
reads several firmware files - the remainder can be read synchronously.
On some test systems, the async read fails; however, a following synch
read works, thus the async failure falls through to the sync try.

Reported-and-Tested by: Felix Janda <felix.janda@posteo.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/b43/b43.h  |    5 +++
 drivers/net/wireless/b43/main.c |   54 ++++++++++++++++++++++++++++++----------
 drivers/net/wireless/b43/main.h |    5 +--
 3 files changed, 48 insertions(+), 16 deletions(-)

--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -7,6 +7,7 @@
 #include <linux/hw_random.h>
 #include <linux/bcma/bcma.h>
 #include <linux/ssb/ssb.h>
+#include <linux/completion.h>
 #include <net/mac80211.h>
 
 #include "debugfs.h"
@@ -722,6 +723,10 @@ enum b43_firmware_file_type {
 struct b43_request_fw_context {
 	/* The device we are requesting the fw for. */
 	struct b43_wldev *dev;
+	/* a completion event structure needed if this call is asynchronous */
+	struct completion fw_load_complete;
+	/* a pointer to the firmware object */
+	const struct firmware *blob;
 	/* The type of firmware to request. */
 	enum b43_firmware_file_type req_type;
 	/* Error messages for each firmware type. */
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2088,11 +2088,18 @@ static void b43_print_fw_helptext(struct
 		b43warn(wl, text);
 }
 
+static void b43_fw_cb(const struct firmware *firmware, void *context)
+{
+	struct b43_request_fw_context *ctx = context;
+
+	ctx->blob = firmware;
+	complete(&ctx->fw_load_complete);
+}
+
 int b43_do_request_fw(struct b43_request_fw_context *ctx,
 		      const char *name,
-		      struct b43_firmware_file *fw)
+		      struct b43_firmware_file *fw, bool async)
 {
-	const struct firmware *blob;
 	struct b43_fw_header *hdr;
 	u32 size;
 	int err;
@@ -2131,11 +2138,31 @@ int b43_do_request_fw(struct b43_request
 		B43_WARN_ON(1);
 		return -ENOSYS;
 	}
-	err = request_firmware(&blob, ctx->fwname, ctx->dev->dev->dev);
+	if (async) {
+		/* do this part asynchronously */
+		init_completion(&ctx->fw_load_complete);
+		err = request_firmware_nowait(THIS_MODULE, 1, ctx->fwname,
+					      ctx->dev->dev->dev, GFP_KERNEL,
+					      ctx, b43_fw_cb);
+		if (err < 0) {
+			pr_err("Unable to load firmware\n");
+			return err;
+		}
+		/* stall here until fw ready */
+		wait_for_completion(&ctx->fw_load_complete);
+		if (ctx->blob)
+			goto fw_ready;
+	/* On some ARM systems, the async request will fail, but the next sync
+	 * request works. For this reason, we dall through here
+	 */
+	}
+	err = request_firmware(&ctx->blob, ctx->fwname,
+			       ctx->dev->dev->dev);
 	if (err == -ENOENT) {
 		snprintf(ctx->errors[ctx->req_type],
 			 sizeof(ctx->errors[ctx->req_type]),
-			 "Firmware file \"%s\" not found\n", ctx->fwname);
+			 "Firmware file \"%s\" not found\n",
+			 ctx->fwname);
 		return err;
 	} else if (err) {
 		snprintf(ctx->errors[ctx->req_type],
@@ -2144,14 +2171,15 @@ int b43_do_request_fw(struct b43_request
 			 ctx->fwname, err);
 		return err;
 	}
-	if (blob->size < sizeof(struct b43_fw_header))
+fw_ready:
+	if (ctx->blob->size < sizeof(struct b43_fw_header))
 		goto err_format;
-	hdr = (struct b43_fw_header *)(blob->data);
+	hdr = (struct b43_fw_header *)(ctx->blob->data);
 	switch (hdr->type) {
 	case B43_FW_TYPE_UCODE:
 	case B43_FW_TYPE_PCM:
 		size = be32_to_cpu(hdr->size);
-		if (size != blob->size - sizeof(struct b43_fw_header))
+		if (size != ctx->blob->size - sizeof(struct b43_fw_header))
 			goto err_format;
 		/* fallthrough */
 	case B43_FW_TYPE_IV:
@@ -2162,7 +2190,7 @@ int b43_do_request_fw(struct b43_request
 		goto err_format;
 	}
 
-	fw->data = blob;
+	fw->data = ctx->blob;
 	fw->filename = name;
 	fw->type = ctx->req_type;
 
@@ -2172,7 +2200,7 @@ err_format:
 	snprintf(ctx->errors[ctx->req_type],
 		 sizeof(ctx->errors[ctx->req_type]),
 		 "Firmware file \"%s\" format error.\n", ctx->fwname);
-	release_firmware(blob);
+	release_firmware(ctx->blob);
 
 	return -EPROTO;
 }
@@ -2223,7 +2251,7 @@ static int b43_try_request_fw(struct b43
 			goto err_no_ucode;
 		}
 	}
-	err = b43_do_request_fw(ctx, filename, &fw->ucode);
+	err = b43_do_request_fw(ctx, filename, &fw->ucode, true);
 	if (err)
 		goto err_load;
 
@@ -2235,7 +2263,7 @@ static int b43_try_request_fw(struct b43
 	else
 		goto err_no_pcm;
 	fw->pcm_request_failed = false;
-	err = b43_do_request_fw(ctx, filename, &fw->pcm);
+	err = b43_do_request_fw(ctx, filename, &fw->pcm, false);
 	if (err == -ENOENT) {
 		/* We did not find a PCM file? Not fatal, but
 		 * core rev <= 10 must do without hwcrypto then. */
@@ -2296,7 +2324,7 @@ static int b43_try_request_fw(struct b43
 	default:
 		goto err_no_initvals;
 	}
-	err = b43_do_request_fw(ctx, filename, &fw->initvals);
+	err = b43_do_request_fw(ctx, filename, &fw->initvals, false);
 	if (err)
 		goto err_load;
 
@@ -2355,7 +2383,7 @@ static int b43_try_request_fw(struct b43
 	default:
 		goto err_no_initvals;
 	}
-	err = b43_do_request_fw(ctx, filename, &fw->initvals_band);
+	err = b43_do_request_fw(ctx, filename, &fw->initvals_band, false);
 	if (err)
 		goto err_load;
 
--- a/drivers/net/wireless/b43/main.h
+++ b/drivers/net/wireless/b43/main.h
@@ -137,9 +137,8 @@ void b43_mac_phy_clock_set(struct b43_wl
 
 
 struct b43_request_fw_context;
-int b43_do_request_fw(struct b43_request_fw_context *ctx,
-		      const char *name,
-		      struct b43_firmware_file *fw);
+int b43_do_request_fw(struct b43_request_fw_context *ctx, const char *name,
+		      struct b43_firmware_file *fw, bool async);
 void b43_do_release_fw(struct b43_firmware_file *fw);
 
 #endif /* B43_MAIN_H_ */

[ 157/221] USB: option: add Nexpring NP10T terminal id

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dzianis Kahanovich <mahatma@bspu.unibel.by>

commit ad86e58661b38b279b7519d4e49c7a19dc1654bb upstream.

Hyundai Petatel Inc. Nexpring NP10T terminal (EV-DO rev.A USB modem) ID

Signed-off-by: Denis Kaganovich <mahatma@eu.by>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -442,6 +442,10 @@ static void option_instat_callback(struc
 #define CELLIENT_VENDOR_ID			0x2692
 #define CELLIENT_PRODUCT_MEN200			0x9005
 
+/* Hyundai Petatel Inc. products */
+#define PETATEL_VENDOR_ID			0x1ff4
+#define PETATEL_PRODUCT_NP10T			0x600e
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -1296,6 +1300,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
 	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
+	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

[ 158/221] USB: option: blacklist network interface on ZTE MF880

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit fab38246f318edcd0dcb8fd3852a47cf8938878a upstream.

The driver description files gives these names to the vendor specific
functions on this modem:

 diag: VID_19D2&PID_0284&MI_00
 nmea: VID_19D2&PID_0284&MI_01
 at:   VID_19D2&PID_0284&MI_02
 mdm:  VID_19D2&PID_0284&MI_03
 net:  VID_19D2&PID_0284&MI_04

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -928,7 +928,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
 	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },

[ 159/221] USB: option: Add new MEDIATEK PID support

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Quentin.Li" <snowmanli88@163.com>

commit 94a85b633829b946eef53fc1825d526312fb856f upstream.

In option.c, add some new MEDIATEK PIDs support for MEDIATEK new products. This
is a MEDIATEK inc. release patch.

Signed-off-by: Quentin.Li <snowmanli88@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -430,9 +430,12 @@ static void option_instat_callback(struc
 #define MEDIATEK_VENDOR_ID			0x0e8d
 #define MEDIATEK_PRODUCT_DC_1COM		0x00a0
 #define MEDIATEK_PRODUCT_DC_4COM		0x00a5
+#define MEDIATEK_PRODUCT_DC_4COM2		0x00a7
 #define MEDIATEK_PRODUCT_DC_5COM		0x00a4
 #define MEDIATEK_PRODUCT_7208_1COM		0x7101
 #define MEDIATEK_PRODUCT_7208_2COM		0x7102
+#define MEDIATEK_PRODUCT_7103_2COM		0x7103
+#define MEDIATEK_PRODUCT_7106_2COM		0x7106
 #define MEDIATEK_PRODUCT_FP_1COM		0x0003
 #define MEDIATEK_PRODUCT_FP_2COM		0x0023
 #define MEDIATEK_PRODUCT_FPDC_1COM		0x0043
@@ -1300,6 +1303,10 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7103_2COM, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7106_2COM, 0x02, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
 	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
 	{ } /* Terminating entry */

[ 160/221] USB: option: add Telekom Speedstick LTE II

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit 5ec0085440ef8c2cf50002b34d5a504ee12aa2bf upstream.

also known as Alcatel One Touch L100V LTE

The driver description files gives these names to the vendor specific
functions on this modem:

 Application1: VID_1BBB&PID_011E&MI_00
 Application2: VID_1BBB&PID_011E&MI_01
 Modem:        VID_1BBB&PID_011E&MI_03
 Ethernet:     VID_1BBB&PID_011E&MI_04

Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -289,6 +289,7 @@ static void option_instat_callback(struc
 #define ALCATEL_VENDOR_ID			0x1bbb
 #define ALCATEL_PRODUCT_X060S_X200		0x0000
 #define ALCATEL_PRODUCT_X220_X500D		0x0017
+#define ALCATEL_PRODUCT_L100V			0x011e
 
 #define PIRELLI_VENDOR_ID			0x1266
 #define PIRELLI_PRODUCT_C100_1			0x1002
@@ -1199,6 +1200,8 @@ static const struct usb_device_id option
 	  .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
 	},
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),

[ 161/221] usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid added

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomasz Mloduchowski <q@qdot.me>

commit 8cf65dc386f3634a43312f436cc7a935476a40c4 upstream.

Simple fix to add support for Crucible Technologies COMET Caller ID
USB decoder - a device containing FTDI USB/Serial converter chip,
handling 1200bps CallerID messages decoded from the phone line -
adding correct USB PID is sufficient.

Tested to apply cleanly and work flawlessly against 3.6.9, 3.7.0-rc8
and 3.8.0-rc3 on both amd64 and x86 arches.

Signed-off-by: Tomasz Mloduchowski <q@qdot.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c     |    2 ++
 drivers/usb/serial/ftdi_sio_ids.h |    6 ++++++
 2 files changed, 8 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -876,6 +876,8 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
+	/* Crucible Devices */
+	{ USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1259,3 +1259,9 @@
  * ATI command output: Cinterion MC55i
  */
 #define FTDI_CINTERION_MC55I_PID	0xA951
+
+/*
+ * Product: Comet Caller ID decoder
+ * Manufacturer: Crucible Technologies
+ */
+#define FTDI_CT_COMET_PID	0x8e08

[ 162/221] USB: cdc-acm: Add support for "PSC Scanning, Magellan 800i"

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Denis N Ladin <denladin@gmail.com>

commit 036915a7a402753c05b8d0529f5fd08805ab46d0 upstream.

Adding support "PSC Scanning, Magellan 800i" in cdc-acm

Very simple, but very necessary.
Suitable for all versions of the kernel > 2.6

Signed-off-by: Denis N Ladin <denladin@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1602,6 +1602,9 @@ static const struct usb_device_id acm_id
 	{ USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */
 	.driver_info = NO_UNION_NORMAL,
 	},
+	{ USB_DEVICE(0x05f9, 0x4002), /* PSC Scanning, Magellan 800i */
+	.driver_info = NO_UNION_NORMAL,
+	},
 	{ USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
 	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
 	},

[ 163/221] usb: gadget: dummy: fix enumeration with g_multi

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

commit 1d16638e3b9cc195bac18a8fcbca748f33c1bc24 upstream.

If we do have endpoints named like "ep-a" then bEndpointAddress is
counted internally by the gadget framework.

If we do have endpoints named like "ep-1" then bEndpointAddress is
assigned from the digit after "ep-".

If we do have both, then it is likely that after we used up the
"generic" endpoints we will use the digits and thus assign one
bEndpointAddress to multiple endpoints.

This theory can be proofed by using the completely enabled g_multi.
Without this patch, the mass storage won't enumerate and times out
because it shares endpoints with RNDIS.

This patch also adds fills up the endpoints list so we have in total
endpoints 1 to 15 in + out available while some of them are restricted
to certain types like BULK or ISO. Without this change the nokia gadget
won't load because the system does not provide enough (BULK) endpoints
but it did before ep-a - ep-f were removed.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/dummy_hcd.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -126,10 +126,7 @@ static const char ep0name[] = "ep0";
 static const char *const ep_name[] = {
 	ep0name,				/* everyone has ep0 */
 
-	/* act like a net2280: high speed, six configurable endpoints */
-	"ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f",
-
-	/* or like pxa250: fifteen fixed function endpoints */
+	/* act like a pxa250: fifteen fixed function endpoints */
 	"ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int",
 	"ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int",
 	"ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso",
@@ -137,6 +134,10 @@ static const char *const ep_name[] = {
 
 	/* or like sa1100: two fixed function endpoints */
 	"ep1out-bulk", "ep2in-bulk",
+
+	/* and now some generic EPs so we have enough in multi config */
+	"ep3out", "ep4in", "ep5out", "ep6out", "ep7in", "ep8out", "ep9in",
+	"ep10out", "ep11out", "ep12in", "ep13out", "ep14in", "ep15out",
 };
 #define DUMMY_ENDPOINTS	ARRAY_SIZE(ep_name)
 

[ 164/221] usb: musb: core: print new line in the driver banner again

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergei Shtylyov <sshtylyov@ru.mvista.com>

commit 2ac788f705e5118dd45204e7a5bc8d5bb6873835 upstream.

Commit 5c8a86e10a7c164f44537fabdc169fd8b4e7a440 (usb: musb: drop unneeded
musb_debug trickery) erroneously removed '\n' from the driver's banner.
Concatenate all the banner substrings while adding it back...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/musb/musb_core.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2351,10 +2351,7 @@ static int __init musb_init(void)
 	if (usb_disabled())
 		return 0;
 
-	pr_info("%s: version " MUSB_VERSION ", "
-		"?dma?"
-		", "
-		"otg (peripheral+host)",
+	pr_info("%s: version " MUSB_VERSION ", ?dma?, otg (peripheral+host)\n",
 		musb_driver_name);
 	return platform_driver_register(&musb_driver);
 }

[ 165/221] drm/nv17-50: restore fence buffer on resume

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcin Slusarz <marcin.slusarz@gmail.com>

commit f20ebd034eab43fd38c58b11c5bb5fb125e5f7d7 upstream.

Since commit 5e120f6e4b3f35b741c5445dfc755f50128c3c44 "drm/nouveau/fence:
convert to exec engine, and improve channel sync" nouveau fence sync
implementation for nv17-50 and nvc0+ started to rely on state of fence buffer
left by previous sync operation. But as pinned bo's (where fence state is
stored) are not saved+restored across suspend/resume, we need to do it
manually.

nvc0+ was fixed by commit d6ba6d215a538a58f0f0026f0961b0b9125e8042
"drm/nvc0/fence: restore pre-suspend fence buffer context on resume".

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=50121

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/nouveau_fence.h |    1 +
 drivers/gpu/drm/nouveau/nv10_fence.c    |    8 ++++++++
 drivers/gpu/drm/nouveau/nv50_fence.c    |    1 +
 3 files changed, 10 insertions(+)

--- a/drivers/gpu/drm/nouveau/nouveau_fence.h
+++ b/drivers/gpu/drm/nouveau/nouveau_fence.h
@@ -60,6 +60,7 @@ u32  nv10_fence_read(struct nouveau_chan
 void nv10_fence_context_del(struct nouveau_channel *);
 void nv10_fence_destroy(struct nouveau_drm *);
 int  nv10_fence_create(struct nouveau_drm *);
+void nv17_fence_resume(struct nouveau_drm *drm);
 
 int nv50_fence_create(struct nouveau_drm *);
 int nv84_fence_create(struct nouveau_drm *);
--- a/drivers/gpu/drm/nouveau/nv10_fence.c
+++ b/drivers/gpu/drm/nouveau/nv10_fence.c
@@ -160,6 +160,13 @@ nv10_fence_destroy(struct nouveau_drm *d
 	kfree(priv);
 }
 
+void nv17_fence_resume(struct nouveau_drm *drm)
+{
+	struct nv10_fence_priv *priv = drm->fence;
+
+	nouveau_bo_wr32(priv->bo, 0, priv->sequence);
+}
+
 int
 nv10_fence_create(struct nouveau_drm *drm)
 {
@@ -192,6 +199,7 @@ nv10_fence_create(struct nouveau_drm *dr
 		if (ret == 0) {
 			nouveau_bo_wr32(priv->bo, 0x000, 0x00000000);
 			priv->base.sync = nv17_fence_sync;
+			priv->base.resume = nv17_fence_resume;
 		}
 	}
 
--- a/drivers/gpu/drm/nouveau/nv50_fence.c
+++ b/drivers/gpu/drm/nouveau/nv50_fence.c
@@ -119,6 +119,7 @@ nv50_fence_create(struct nouveau_drm *dr
 	if (ret == 0) {
 		nouveau_bo_wr32(priv->bo, 0x000, 0x00000000);
 		priv->base.sync = nv17_fence_sync;
+		priv->base.resume = nv17_fence_resume;
 	}
 
 	if (ret)

[ 166/221] drm/nouveau: fix blank LVDS screen regression on pre-nv50 cards

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcin Slusarz <marcin.slusarz@gmail.com>

commit 92441b2263866c27ef48137be5aa6c8c692652fc upstream.

Commit 2a44e499 ("drm/nouveau/disp: introduce proper init/fini, separate
from create/destroy") started to call display init routines on pre-nv50
hardware on module load. But LVDS init code sets driver state in a way
which prevents modesetting code from operating properly.

nv04_display_init calls nv04_dfp_restore, which sets encoder->last_dpms to
NV_DPMS_CLEARED.

drm_crtc_helper_set_mode
  nv04_dfp_prepare
    nv04_lvds_dpms(DRM_MODE_DPMS_OFF)

nv04_lvds_dpms checks last_dpms mode (which is NV_DPMS_CLEARED) and wrongly
assumes it's a "powersaving mode", the new one (DRM_MODE_DPMS_OFF) is too,
so it skips calling some crucial lvds scripts.

Reported-by: Chris Paulson-Ellis <chris@edesix.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/nv04_dfp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nv04_dfp.c
+++ b/drivers/gpu/drm/nouveau/nv04_dfp.c
@@ -505,7 +505,7 @@ static void nv04_dfp_update_backlight(st
 
 static inline bool is_powersaving_dpms(int mode)
 {
-	return (mode != DRM_MODE_DPMS_ON);
+	return mode != DRM_MODE_DPMS_ON && mode != NV_DPMS_CLEARED;
 }
 
 static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode)

[ 167/221] drm/nouveau: add locking around instobj list operations

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcin Slusarz <marcin.slusarz@gmail.com>

commit 4c4101d29fb6c63f78791d02c437702b11e1d4f0 upstream.

Fixes memory corruptions, oopses, etc. when multiple gpuobjs are
simultaneously created or destroyed.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/core/subdev/instmem/base.c |   35 ++++++++++++++++-----
 1 file changed, 27 insertions(+), 8 deletions(-)

--- a/drivers/gpu/drm/nouveau/core/subdev/instmem/base.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/instmem/base.c
@@ -40,15 +40,21 @@ nouveau_instobj_create_(struct nouveau_o
 	if (ret)
 		return ret;
 
+	mutex_lock(&imem->base.mutex);
 	list_add(&iobj->head, &imem->list);
+	mutex_unlock(&imem->base.mutex);
 	return 0;
 }
 
 void
 nouveau_instobj_destroy(struct nouveau_instobj *iobj)
 {
-	if (iobj->head.prev)
-		list_del(&iobj->head);
+	struct nouveau_subdev *subdev = nv_subdev(iobj->base.engine);
+
+	mutex_lock(&subdev->mutex);
+	list_del(&iobj->head);
+	mutex_unlock(&subdev->mutex);
+
 	return nouveau_object_destroy(&iobj->base);
 }
 
@@ -88,6 +94,8 @@ nouveau_instmem_init(struct nouveau_inst
 	if (ret)
 		return ret;
 
+	mutex_lock(&imem->base.mutex);
+
 	list_for_each_entry(iobj, &imem->list, head) {
 		if (iobj->suspend) {
 			for (i = 0; i < iobj->size; i += 4)
@@ -97,6 +105,8 @@ nouveau_instmem_init(struct nouveau_inst
 		}
 	}
 
+	mutex_unlock(&imem->base.mutex);
+
 	return 0;
 }
 
@@ -104,17 +114,26 @@ int
 nouveau_instmem_fini(struct nouveau_instmem *imem, bool suspend)
 {
 	struct nouveau_instobj *iobj;
-	int i;
+	int i, ret = 0;
 
 	if (suspend) {
+		mutex_lock(&imem->base.mutex);
+
 		list_for_each_entry(iobj, &imem->list, head) {
 			iobj->suspend = vmalloc(iobj->size);
-			if (iobj->suspend) {
-				for (i = 0; i < iobj->size; i += 4)
-					iobj->suspend[i / 4] = nv_ro32(iobj, i);
-			} else
-				return -ENOMEM;
+			if (!iobj->suspend) {
+				ret = -ENOMEM;
+				break;
+			}
+
+			for (i = 0; i < iobj->size; i += 4)
+				iobj->suspend[i / 4] = nv_ro32(iobj, i);
 		}
+
+		mutex_unlock(&imem->base.mutex);
+
+		if (ret)
+			return ret;
 	}
 
 	return nouveau_subdev_fini(&imem->base, suspend);

[ 168/221] drm/nouveau/clock: fix support for more than 2 monitors on nve0

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aleksi Torhamo <aleksi@torhamo.net>

commit d19528a9e4f220519c2cb3f56ef0c84ead3ee440 upstream.

Fixes regression introduced in commit 70790f4f
"drm/nouveau/clock: pull in the implementation from all over the place"

When code was moved from nv50_crtc_set_clock to nvc0_clock_pll_set,
the PLLs it is used for got limited to only the first two VPLLs.

nv50_crtc_set_clock was only called to change VPLLs, so it didn't
limit what it was used for in any way. Since nvc0_clock_pll_set is
used for all PLLs, it has to specify which PLLs the code is used for,
and only listed the first two VPLLs.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=58735

This patch is a -stable candidate for 3.7.

Signed-off-by: Aleksi Torhamo <aleksi@torhamo.net>
Tested-by: Aleksi Torhamo <aleksi@torhamo.net>
Tested-by: Sean Santos <quantheory@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/core/include/subdev/bios/pll.h |    2 ++
 drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c       |    2 ++
 2 files changed, 4 insertions(+)

--- a/drivers/gpu/drm/nouveau/core/include/subdev/bios/pll.h
+++ b/drivers/gpu/drm/nouveau/core/include/subdev/bios/pll.h
@@ -38,6 +38,8 @@ enum nvbios_pll_type {
 	PLL_UNK42  = 0x42,
 	PLL_VPLL0  = 0x80,
 	PLL_VPLL1  = 0x81,
+	PLL_VPLL2  = 0x82,
+	PLL_VPLL3  = 0x83,
 	PLL_MAX    = 0xff
 };
 
--- a/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c
@@ -52,6 +52,8 @@ nvc0_clock_pll_set(struct nouveau_clock
 	switch (info.type) {
 	case PLL_VPLL0:
 	case PLL_VPLL1:
+	case PLL_VPLL2:
+	case PLL_VPLL3:
 		nv_mask(priv, info.reg + 0x0c, 0x00000000, 0x00000100);
 		nv_wr32(priv, info.reg + 0x04, (P << 16) | (N << 8) | M);
 		nv_wr32(priv, info.reg + 0x10, fN << 16);

[ 169/221] drm/nvc0/fb: fix crash when different mutex is used to protect same list

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aleksi Torhamo <aleksi@torhamo.net>

commit 43f789792e2c7ea2bff37195e4c4b4239e9e02b7 upstream.

Fixes regression introduced in commit 861d2107
"drm/nouveau/fb: merge fb/vram and port to subdev interfaces"

nv50_fb_vram_{new,del} functions were changed to use
nouveau_subdev->mutex instead of the old nouveau_mm->mutex.
nvc0_fb_vram_new still uses the nouveau_mm->mutex, but nvc0 doesn't
have its own fb_vram_del function, using nv50_fb_vram_del instead.
Because of this, on nvc0 a different mutex ends up being used to protect
additions and deletions to the same list.

This patch is a -stable candidate for 3.7.

Signed-off-by: Aleksi Torhamo <aleksi@torhamo.net>
Reported-by: Roy Spliet <r.spliet@student.tudelft.nl>
Tested-by: Roy Spliet <r.spliet@student.tudelft.nl>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c
@@ -86,14 +86,14 @@ nvc0_fb_vram_new(struct nouveau_fb *pfb,
 	mem->memtype = type;
 	mem->size = size;
 
-	mutex_lock(&mm->mutex);
+	mutex_lock(&pfb->base.mutex);
 	do {
 		if (back)
 			ret = nouveau_mm_tail(mm, 1, size, ncmin, align, &r);
 		else
 			ret = nouveau_mm_head(mm, 1, size, ncmin, align, &r);
 		if (ret) {
-			mutex_unlock(&mm->mutex);
+			mutex_unlock(&pfb->base.mutex);
 			pfb->ram.put(pfb, &mem);
 			return ret;
 		}
@@ -101,7 +101,7 @@ nvc0_fb_vram_new(struct nouveau_fb *pfb,
 		list_add_tail(&r->rl_entry, &mem->regions);
 		size -= r->length;
 	} while (size);
-	mutex_unlock(&mm->mutex);
+	mutex_unlock(&pfb->base.mutex);
 
 	r = list_first_entry(&mem->regions, struct nouveau_mm_node, rl_entry);
 	mem->offset = (u64)r->offset << 12;

[ 170/221] USB: Handle auto-transition from hot to warm reset.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 1c7439c61fa6516419c32a9824976334ea969d47 upstream.

USB 3.0 hubs and roothubs will automatically transition a failed hot
reset to a warm (BH) reset.  In that case, the warm reset change bit
will be set, and the link state change bit may also be set.  Change
hub_port_finish_reset to unconditionally clear those change bits for USB
3.0 hubs.  If these bits are not cleared, we may lose port change events
from the roothub.

This commit should be backported to kernels as old as 3.2, that contain
the commit 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore: refine
warm reset logic".

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2541,16 +2541,16 @@ static void hub_port_finish_reset(struct
 		clear_port_feature(hub->hdev,
 				port1, USB_PORT_FEAT_C_RESET);
 		/* FIXME need disconnect() for NOTATTACHED device */
-		if (warm) {
+		if (hub_is_superspeed(hub->hdev)) {
 			clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_BH_PORT_RESET);
 			clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_PORT_LINK_STATE);
-		} else {
+		}
+		if (!warm)
 			usb_set_device_state(udev, *status
 					? USB_STATE_NOTATTACHED
 					: USB_STATE_DEFAULT);
-		}
 		break;
 	}
 }

[ 171/221] USB: Add device quirk for Microsoft VX700 webcam

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andreas Fleig <andreasfleig@gmail.com>

commit bc009eca8d539162f7271c2daf0ab5e9e3bb90a0 upstream.

Add device quirk for Microsoft Lifecam VX700 v2.0 webcams.
Fixes squeaking noise of the microphone.

Signed-off-by: Andreas Fleig <andreasfleig@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -43,6 +43,9 @@ static const struct usb_device_id usb_qu
 	/* Creative SB Audigy 2 NX */
 	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Microsoft LifeCam-VX700 v2.0 */
+	{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Quickcam Fusion */
 	{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
 

[ 172/221] USB: Ignore xHCI Reset Device status.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 8b8132bc3d1cc3d4c0687e4d638a482fa920d98a upstream.

When the USB core finishes reseting a USB device, the xHCI driver sends
a Reset Device command to the host.  The xHC then updates its internal
representation of the USB device to the 'Default' device state.  If the
device was already in the Default state, the xHC will complete the
command with an error status.

If a device needs to be reset several times during enumeration, the
second reset will always fail because of the xHCI Reset Device command.
This can cause issues during enumeration.

For example, usb_reset_and_verify_device calls into hub_port_init in a
loop.  Say that on the first call into hub_port_init, the device is
successfully reset, but doesn't respond to several set address control
transfers.  Then the port will be disabled, but the udev will remain in
tact.  usb_reset_and_verify_device will call into hub_port_init again.

On the second call into hub_port_init, the device will be reset, and the
xHCI driver will issue a Reset Device command.  This command will fail
(because the device is already in the Default state), and
usb_reset_and_verify_device will fail.  The port will be disabled, and
the device won't be able to enumerate.

Fix this by ignoring the return value of the HCD reset_device callback.

This commit should be backported to kernels as old as 3.2, that contain
the commit 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore: refine
warm reset logic".

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |   13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2526,14 +2526,11 @@ static void hub_port_finish_reset(struct
 			msleep(10 + 40);
 			update_devnum(udev, 0);
 			hcd = bus_to_hcd(udev->bus);
-			if (hcd->driver->reset_device) {
-				*status = hcd->driver->reset_device(hcd, udev);
-				if (*status < 0) {
-					dev_err(&udev->dev, "Cannot reset "
-							"HCD device state\n");
-					break;
-				}
-			}
+			/* The xHC may think the device is already reset,
+			 * so ignore the status.
+			 */
+			if (hcd->driver->reset_device)
+				hcd->driver->reset_device(hcd, udev);
 		}
 		/* FALL THROUGH */
 	case -ENOTCONN:

[ 173/221] USB: Allow USB 3.0 ports to be disabled.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 41e7e056cdc662f704fa9262e5c6e213b4ab45dd upstream.

If hot and warm reset fails, or a port remains in the Compliance Mode,
the USB core needs to be able to disable a USB 3.0 port.  Unlike USB 2.0
ports, once the port is placed into the Disabled link state, it will not
report any new device connects.  To get device connect notifications, we
need to put the link into the Disabled state, and then the RxDetect
state.

The xHCI driver needs to atomically clear all change bits on USB 3.0
port disable, so that we get Port Status Change Events for future port
changes.  We could technically do this in the USB core instead of in the
xHCI roothub code, since the port state machine can't advance out of the
disabled state until we set the link state to RxDetect.  However,
external USB 3.0 hubs don't need this code.  They are level-triggered,
not edge-triggered like xHCI, so they will continue to send interrupt
events when any change bit is set.  Therefore it doesn't make sense to
put this code in the USB core.

This patch is part of a series to fix several reports of infinite loops
on device enumeration failure.  This includes John, when he boots with
a USB 3.0 device (Roseweil eusb3 enclosure) attached to his NEC 0.96
host controller.  The fix requires warm reset support, so it does not
make sense to backport this patch to stable kernels without warm reset
support.

This patch should be backported to kernels as old as 3.2, contain the
commit ID 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore: refine warm
reset logic"

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: John Covici <covici@ccs.covici.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c      |   63 ++++++++++++++++++++++++++++++++++++++++++--
 drivers/usb/host/xhci-hub.c |   31 ++++++++++++++++++++-
 2 files changed, 90 insertions(+), 4 deletions(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -876,6 +876,60 @@ static int hub_hub_status(struct usb_hub
 	return ret;
 }
 
+static int hub_set_port_link_state(struct usb_hub *hub, int port1,
+			unsigned int link_status)
+{
+	return set_port_feature(hub->hdev,
+			port1 | (link_status << 3),
+			USB_PORT_FEAT_LINK_STATE);
+}
+
+/*
+ * If USB 3.0 ports are placed into the Disabled state, they will no longer
+ * detect any device connects or disconnects.  This is generally not what the
+ * USB core wants, since it expects a disabled port to produce a port status
+ * change event when a new device connects.
+ *
+ * Instead, set the link state to Disabled, wait for the link to settle into
+ * that state, clear any change bits, and then put the port into the RxDetect
+ * state.
+ */
+static int hub_usb3_port_disable(struct usb_hub *hub, int port1)
+{
+	int ret;
+	int total_time;
+	u16 portchange, portstatus;
+
+	if (!hub_is_superspeed(hub->hdev))
+		return -EINVAL;
+
+	ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
+	if (ret) {
+		dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
+				port1, ret);
+		return ret;
+	}
+
+	/* Wait for the link to enter the disabled state. */
+	for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
+		ret = hub_port_status(hub, port1, &portstatus, &portchange);
+		if (ret < 0)
+			return ret;
+
+		if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+				USB_SS_PORT_LS_SS_DISABLED)
+			break;
+		if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+			break;
+		msleep(HUB_DEBOUNCE_STEP);
+	}
+	if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+		dev_warn(hub->intfdev, "Could not disable port %d after %d ms\n",
+				port1, total_time);
+
+	return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT);
+}
+
 static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
 {
 	struct usb_device *hdev = hub->hdev;
@@ -884,8 +938,13 @@ static int hub_port_disable(struct usb_h
 	if (hub->ports[port1 - 1]->child && set_state)
 		usb_set_device_state(hub->ports[port1 - 1]->child,
 				USB_STATE_NOTATTACHED);
-	if (!hub->error && !hub_is_superspeed(hub->hdev))
-		ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
+	if (!hub->error) {
+		if (hub_is_superspeed(hub->hdev))
+			ret = hub_usb3_port_disable(hub, port1);
+		else
+			ret = clear_port_feature(hdev, port1,
+					USB_PORT_FEAT_ENABLE);
+	}
 	if (ret)
 		dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
 				port1, ret);
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -761,12 +761,39 @@ int xhci_hub_control(struct usb_hcd *hcd
 			break;
 		case USB_PORT_FEAT_LINK_STATE:
 			temp = xhci_readl(xhci, port_array[wIndex]);
+
+			/* Disable port */
+			if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
+				xhci_dbg(xhci, "Disable port %d\n", wIndex);
+				temp = xhci_port_state_to_neutral(temp);
+				/*
+				 * Clear all change bits, so that we get a new
+				 * connection event.
+				 */
+				temp |= PORT_CSC | PORT_PEC | PORT_WRC |
+					PORT_OCC | PORT_RC | PORT_PLC |
+					PORT_CEC;
+				xhci_writel(xhci, temp | PORT_PE,
+					port_array[wIndex]);
+				temp = xhci_readl(xhci, port_array[wIndex]);
+				break;
+			}
+
+			/* Put link in RxDetect (enable port) */
+			if (link_state == USB_SS_PORT_LS_RX_DETECT) {
+				xhci_dbg(xhci, "Enable port %d\n", wIndex);
+				xhci_set_link_state(xhci, port_array, wIndex,
+						link_state);
+				temp = xhci_readl(xhci, port_array[wIndex]);
+				break;
+			}
+
 			/* Software should not attempt to set
-			 * port link state above '5' (Rx.Detect) and the port
+			 * port link state above '3' (U3) and the port
 			 * must be enabled.
 			 */
 			if ((temp & PORT_PE) == 0 ||
-				(link_state > USB_SS_PORT_LS_RX_DETECT)) {
+				(link_state > USB_SS_PORT_LS_U3)) {
 				xhci_warn(xhci, "Cannot set link state.\n");
 				goto error;
 			}

[ 174/221] USB: Increase reset timeout.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 77c7f072c87fa951e9a74805febf26466f31170c upstream.

John's NEC 0.96 xHCI host controller needs a longer timeout for a warm
reset to complete.  The logs show it takes 650ms to complete the warm
reset, so extend the hub reset timeout to 800ms to be on the safe side.

This commit should be backported to kernels as old as 3.2, that contain
the commit 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore: refine
warm reset logic".

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: John Covici <covici@ccs.covici.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2460,7 +2460,7 @@ static unsigned hub_is_wusb(struct usb_h
 #define HUB_SHORT_RESET_TIME	10
 #define HUB_BH_RESET_TIME	50
 #define HUB_LONG_RESET_TIME	200
-#define HUB_RESET_TIMEOUT	500
+#define HUB_RESET_TIMEOUT	800
 
 static int hub_port_reset(struct usb_hub *hub, int port1,
 			struct usb_device *udev, unsigned int delay, bool warm);

[ 175/221] USB: Ignore port state until reset completes.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 4f43447e62b37ee19c82a13f72f35b1ca60a74d3 upstream.

The port reset code bails out early if the current connect status is
cleared (device disconnected).  If we're issuing a hot reset, it may
also look at the link state before the reset is finished.

Section 10.14.2.6 of the USB 3.0 spec says that when a port enters the
Error state or Resetting state, the port connection bit retains the
value from the previous state.  Therefore we can't trust it until the
reset finishes.  Also, the xHCI spec section 4.19.1.2.5 says software
shall ignore the link state while the port is resetting, as it can be in
an unknown state.

The port state during reset is also unknown for USB 2.0 hubs.  The hub
sends a reset signal by driving the bus into an SE0 state.  This
overwhelms the "connect" signal from the device, so the port can't tell
whether anything is connected or not.

Fix the port reset code to ignore the port link state and current
connect bit until the reset finishes, and USB_PORT_STAT_RESET is
cleared.

Remove the check for USB_PORT_STAT_C_BH_RESET in the warm reset case,
because it's redundant.  When the warm reset finishes, the port reset
bit will be cleared at the same time USB_PORT_STAT_C_BH_RESET is set.
Remove the now-redundant check for a cleared USB_PORT_STAT_RESET bit
in the code to deal with the finished reset.

This patch should be backported to all stable kernels.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2495,6 +2495,10 @@ static int hub_port_wait_reset(struct us
 		if (ret < 0)
 			return ret;
 
+		/* The port state is unknown until the reset completes. */
+		if ((portstatus & USB_PORT_STAT_RESET))
+			goto delay;
+
 		/*
 		 * Some buggy devices require a warm reset to be issued even
 		 * when the port appears not to be connected.
@@ -2540,11 +2544,7 @@ static int hub_port_wait_reset(struct us
 			if ((portchange & USB_PORT_STAT_C_CONNECTION))
 				return -ENOTCONN;
 
-			/* if we`ve finished resetting, then break out of
-			 * the loop
-			 */
-			if (!(portstatus & USB_PORT_STAT_RESET) &&
-			    (portstatus & USB_PORT_STAT_ENABLE)) {
+			if ((portstatus & USB_PORT_STAT_ENABLE)) {
 				if (hub_is_wusb(hub))
 					udev->speed = USB_SPEED_WIRELESS;
 				else if (hub_is_superspeed(hub->hdev))
@@ -2558,10 +2558,10 @@ static int hub_port_wait_reset(struct us
 				return 0;
 			}
 		} else {
-			if (portchange & USB_PORT_STAT_C_BH_RESET)
-				return 0;
+			return 0;
 		}
 
+delay:
 		/* switch to the long delay after two short delay failures */
 		if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
 			delay = HUB_LONG_RESET_TIME;

[ 176/221] USB: Handle warm reset failure on empty port.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 65bdac5effd15d6af619b3b7218627ef4d84ed6a upstream.

An empty port can transition to either Inactive or Compliance Mode if a
newly connected USB 3.0 device fails to link train.  In that case, we
issue a warm reset.  Some devices, such as John's Roseweil eusb3
enclosure, slip back into Compliance Mode after the warm reset.

The current warm reset code does not check for device connect status on
warm reset completion, and it incorrectly reports the warm reset
succeeded.  This causes the USB core to attempt to send a Set Address
control transfer to a port in Compliance Mode, which will always fail.

Make hub_port_wait_reset check the current connect status and link state
after the warm reset completes.  Return a failure status if the device
is disconnected or the link state is Compliance Mode or SS.Inactive.

Make hub_events disable the port if warm reset fails.  This will disable
the port, and then bring it back into the RxDetect state.  Make the USB
core ignore the connect change until the device reconnects.

Note that this patch does NOT handle connected devices slipping into the
Inactive state very well.  This is a concern, because devices can go
into the Inactive state on U1/U2 exit failure.  However, the fix for
that case is too large for stable, so it will be submitted in a separate
patch.

This patch should be backported to kernels as old as 3.2, contain the
commit ID 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore: refine warm
reset logic"

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: John Covici <covici@ccs.covici.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2558,6 +2558,11 @@ static int hub_port_wait_reset(struct us
 				return 0;
 			}
 		} else {
+			if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+					hub_port_warm_reset_required(hub,
+						portstatus))
+				return -ENOTCONN;
+
 			return 0;
 		}
 
@@ -4628,9 +4633,14 @@ static void hub_events(void)
 			 * SS.Inactive state.
 			 */
 			if (hub_port_warm_reset_required(hub, portstatus)) {
+				int status;
+
 				dev_dbg(hub_dev, "warm reset port %d\n", i);
-				hub_port_reset(hub, i, NULL,
+				status = hub_port_reset(hub, i, NULL,
 						HUB_BH_RESET_TIME, true);
+				if (status < 0)
+					hub_port_disable(hub, i, 1);
+				connect_change = 0;
 			}
 
 			if (connect_change)

[ 177/221] xhci: Avoid "dead ports", add roothub port polling.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit c52804a472649b2e5005342308739434cbd51119 upstream.

The USB core hub thread (khubd) is designed with external USB hubs in
mind.  It expects that if a port status change bit is set, the hub will
continue to send a notification through the hub status data transfer.
Basically, it expects hub notifications to be level-triggered.

The xHCI host controller is designed to be edge-triggered on the logical
'OR' of all the port status change bits.  When all port status change
bits are clear, and a new change bit is set, the xHC will generate a
Port Status Change Event.  If another change bit is set in the same port
status register before the first bit is cleared, it will not send
another event.

This means that the hub code may lose port status changes because of
race conditions between clearing change bits.  The user sees this as a
"dead port" that doesn't react to device connects.

The fix is to turn on port polling whenever a new change bit is set.
Once the USB core issues a hub status request that shows that no change
bits are set in any USB ports, turn off port polling.

We can't allow the USB core to poll the roothub for port events during
host suspend because if the PCI host is in D3cold, the port registers
will be all f's.  Instead, stop the port polling timer, and
unconditionally restart it when the host resumes.  If there are no port
change bits set after the resume, the first call to hub_status_data will
disable polling.

This patch should be backported to stable kernels with the first xHCI
support, 2.6.31 and newer, that include the commit
0f2a79300a1471cf92ab43af165ea13555c8b0a5 "USB: xhci: Root hub support."
There will be merge conflicts because the check for HC_STATE_SUSPENDED
was moved into xhci_suspend in 3.8.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-hub.c  |    7 +++++++
 drivers/usb/host/xhci-ring.c |    9 +++++++++
 drivers/usb/host/xhci.c      |   10 ++++++++++
 3 files changed, 26 insertions(+)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -984,6 +984,7 @@ int xhci_hub_status_data(struct usb_hcd
 	int max_ports;
 	__le32 __iomem **port_array;
 	struct xhci_bus_state *bus_state;
+	bool reset_change = false;
 
 	max_ports = xhci_get_ports(hcd, &port_array);
 	bus_state = &xhci->bus_state[hcd_index(hcd)];
@@ -1015,6 +1016,12 @@ int xhci_hub_status_data(struct usb_hcd
 			buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
 			status = 1;
 		}
+		if ((temp & PORT_RC))
+			reset_change = true;
+	}
+	if (!status && !reset_change) {
+		xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+		clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
 	return status ? retval : 0;
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1725,6 +1725,15 @@ cleanup:
 	if (bogus_port_status)
 		return;
 
+	/*
+	 * xHCI port-status-change events occur when the "or" of all the
+	 * status-change bits in the portsc register changes from 0 to 1.
+	 * New status changes won't cause an event if any other change
+	 * bits are still set.  When an event occurs, switch over to
+	 * polling to avoid losing status changes.
+	 */
+	xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 	spin_unlock(&xhci->lock);
 	/* Pass this up to the core */
 	usb_hcd_poll_rh_status(hcd);
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -880,6 +880,11 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	u32			command;
 
+	/* Don't poll the roothubs on bus suspend. */
+	xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+
 	spin_lock_irq(&xhci->lock);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
@@ -1064,6 +1069,11 @@ int xhci_resume(struct xhci_hcd *xhci, b
 	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
 		compliance_mode_recovery_timer_init(xhci);
 
+	/* Re-enable port polling. */
+	xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	usb_hcd_poll_rh_status(hcd);
+
 	return retval;
 }
 #endif	/* CONFIG_PM */

[ 178/221] USB: hub: handle claim of enabled remote wakeup after reset

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <oliver@neukum.org>

commit 07e72b95f5038cc82304b9a4a2eb7f9fc391ea68 upstream.

Some touchscreens have buggy firmware which claims
remote wakeup to be enabled after a reset. They nevertheless
crash if the feature is cleared by the host.
Add a check for reset resume before checking for
an enabled remote wakeup feature. On compliant
devices the feature must be cleared after a reset anyway.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hub.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2960,7 +2960,7 @@ int usb_port_suspend(struct usb_device *
 static int finish_port_resume(struct usb_device *udev)
 {
 	int	status = 0;
-	u16	devstatus;
+	u16	devstatus = 0;
 
 	/* caller owns the udev device lock */
 	dev_dbg(&udev->dev, "%s\n",
@@ -3005,7 +3005,13 @@ static int finish_port_resume(struct usb
 	if (status) {
 		dev_dbg(&udev->dev, "gone after usb resume? status %d\n",
 				status);
-	} else if (udev->actconfig) {
+	/*
+	 * There are a few quirky devices which violate the standard
+	 * by claiming to have remote wakeup enabled after a reset,
+	 * which crash if the feature is cleared, hence check for
+	 * udev->reset_resume
+	 */
+	} else if (udev->actconfig && !udev->reset_resume) {
 		le16_to_cpus(&devstatus);
 		if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
 			status = usb_control_msg(udev,

[ 179/221] xhci: Handle HS bulk/ctrl endpoints that dont NAK.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 55c1945edaac94c5338a3647bc2e85ff75d9cf36 upstream.

A high speed control or bulk endpoint may have bInterval set to zero,
which means it does not NAK.  If bInterval is non-zero, it means the
endpoint NAKs at a rate of 2^(bInterval - 1).

The xHCI code to compute the NAK interval does not handle the special
case of zero properly.  The current code unconditionally subtracts one
from bInterval and uses it as an exponent.  This causes a very large
bInterval to be used, and warning messages like these will be printed:

usb 1-1: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes

This may cause the xHCI host hardware to reject the Configure Endpoint
command, which means the HS device will be unusable under xHCI ports.

This patch should be backported to kernels as old as 2.6.31, that contain
commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math in
xhci_get_endpoint_interval()".

Reported-by: Vincent Pelletier <plr.vincent@gmail.com>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-mem.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1250,6 +1250,8 @@ static unsigned int xhci_microframes_to_
 static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
+	if (ep->desc.bInterval == 0)
+		return 0;
 	return xhci_microframes_to_exponent(udev, ep,
 			ep->desc.bInterval, 0, 15);
 }

[ 180/221] USB: ehci: make debug port in-use detection functional again

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Beulich <JBeulich@suse.com>

commit 75e1a2ae1f61ce1ae640410ba757bba84bd9fefe upstream.

Debug port in-use determination must be done before the controller gets
reset the first time, i.e. before the call to ehci_setup() as of commit
1a49e2ac9651df7349867a5cf44e2c83de1046af. That commit effectively
rendered commit 9fa5780beea1274d498a224822397100022da7d4 useless.

While moving that code around, also fix the BAR determination - the
respective capability field is a 3- rather than a 2-bit one -, and use
PCI_CAP_ID_DBG instead of the literal 0x0a.

It's unclear to me whether the debug port functionality is important
enough to warrant fixing this in stable kernels too.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/ehci-pci.c |   39 ++++++++++++++++++++-------------------
 1 file changed, 20 insertions(+), 19 deletions(-)

--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -192,6 +192,26 @@ static int ehci_pci_setup(struct usb_hcd
 		break;
 	}
 
+	/* optional debug port, normally in the first BAR */
+	temp = pci_find_capability(pdev, PCI_CAP_ID_DBG);
+	if (temp) {
+		pci_read_config_dword(pdev, temp, &temp);
+		temp >>= 16;
+		if (((temp >> 13) & 7) == 1) {
+			u32 hcs_params = ehci_readl(ehci,
+						    &ehci->caps->hcs_params);
+
+			temp &= 0x1fff;
+			ehci->debug = hcd->regs + temp;
+			temp = ehci_readl(ehci, &ehci->debug->control);
+			ehci_info(ehci, "debug port %d%s\n",
+				  HCS_DEBUG_PORT(hcs_params),
+				  (temp & DBGP_ENABLED) ? " IN USE" : "");
+			if (!(temp & DBGP_ENABLED))
+				ehci->debug = NULL;
+		}
+	}
+
 	retval = ehci_setup(hcd);
 	if (retval)
 		return retval;
@@ -226,25 +246,6 @@ static int ehci_pci_setup(struct usb_hcd
 		break;
 	}
 
-	/* optional debug port, normally in the first BAR */
-	temp = pci_find_capability(pdev, 0x0a);
-	if (temp) {
-		pci_read_config_dword(pdev, temp, &temp);
-		temp >>= 16;
-		if ((temp & (3 << 13)) == (1 << 13)) {
-			temp &= 0x1fff;
-			ehci->debug = hcd->regs + temp;
-			temp = ehci_readl(ehci, &ehci->debug->control);
-			ehci_info(ehci, "debug port %d%s\n",
-				HCS_DEBUG_PORT(ehci->hcs_params),
-				(temp & DBGP_ENABLED)
-					? " IN USE"
-					: "");
-			if (!(temp & DBGP_ENABLED))
-				ehci->debug = NULL;
-		}
-	}
-
 	/* at least the Genesys GL880S needs fixup here */
 	temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
 	temp &= 0x0f;

[ 181/221] regulator: max8997: Use uV in voltage_map_desc

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@ingics.com>

commit bc3b7756b5ff66828acf7bc24f148d28b8d61108 upstream.

Current code does integer division (min_vol = min_uV / 1000) before pass
min_vol to max8997_get_voltage_proper_val().
So it is possible min_vol is truncated to a smaller value.

For example, if the request min_uV is 800900 for ldo.
min_vol = 800900 / 1000 = 800 (mV)
Then max8997_get_voltage_proper_val returns 800 mV for this case which is lower
than the requested voltage.

Use uV rather than mV in voltage_map_desc to prevent truncation by integer
division.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/max8997.c |   36 +++++++++++++++++-------------------
 1 file changed, 17 insertions(+), 19 deletions(-)

--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -69,26 +69,26 @@ struct voltage_map_desc {
 	int step;
 };
 
-/* Voltage maps in mV */
+/* Voltage maps in uV */
 static const struct voltage_map_desc ldo_voltage_map_desc = {
-	.min = 800,	.max = 3950,	.step = 50,
+	.min = 800000,	.max = 3950000,	.step = 50000,
 }; /* LDO1 ~ 18, 21 all */
 
 static const struct voltage_map_desc buck1245_voltage_map_desc = {
-	.min = 650,	.max = 2225,	.step = 25,
+	.min = 650000,	.max = 2225000,	.step = 25000,
 }; /* Buck1, 2, 4, 5 */
 
 static const struct voltage_map_desc buck37_voltage_map_desc = {
-	.min = 750,	.max = 3900,	.step = 50,
+	.min = 750000,	.max = 3900000,	.step = 50000,
 }; /* Buck3, 7 */
 
-/* current map in mA */
+/* current map in uA */
 static const struct voltage_map_desc charger_current_map_desc = {
-	.min = 200,	.max = 950,	.step = 50,
+	.min = 200000,	.max = 950000,	.step = 50000,
 };
 
 static const struct voltage_map_desc topoff_current_map_desc = {
-	.min = 50,	.max = 200,	.step = 10,
+	.min = 50000,	.max = 200000,	.step = 10000,
 };
 
 static const struct voltage_map_desc *reg_voltage_map[] = {
@@ -192,7 +192,7 @@ static int max8997_list_voltage(struct r
 	if (val > desc->max)
 		return -EINVAL;
 
-	return val * 1000;
+	return val;
 }
 
 static int max8997_get_enable_register(struct regulator_dev *rdev,
@@ -483,7 +483,6 @@ static int max8997_set_voltage_ldobuck(s
 {
 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
 	struct i2c_client *i2c = max8997->iodev->i2c;
-	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
 	const struct voltage_map_desc *desc;
 	int rid = rdev_get_id(rdev);
 	int i, reg, shift, mask, ret;
@@ -507,7 +506,7 @@ static int max8997_set_voltage_ldobuck(s
 
 	desc = reg_voltage_map[rid];
 
-	i = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
+	i = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
 	if (i < 0)
 		return i;
 
@@ -555,7 +554,7 @@ static int max8997_set_voltage_ldobuck_t
 	case MAX8997_BUCK4:
 	case MAX8997_BUCK5:
 		return DIV_ROUND_UP(desc->step * (new_selector - old_selector),
-				    max8997->ramp_delay);
+				    max8997->ramp_delay * 1000);
 	}
 
 	return 0;
@@ -654,7 +653,6 @@ static int max8997_set_voltage_buck(stru
 	const struct voltage_map_desc *desc;
 	int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg;
 	bool gpio_dvs_mode = false;
-	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
 
 	if (rid < MAX8997_BUCK1 || rid > MAX8997_BUCK7)
 		return -EINVAL;
@@ -679,7 +677,7 @@ static int max8997_set_voltage_buck(stru
 						selector);
 
 	desc = reg_voltage_map[rid];
-	new_val = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
+	new_val = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
 	if (new_val < 0)
 		return new_val;
 
@@ -977,8 +975,8 @@ static __devinit int max8997_pmic_probe(
 		max8997->buck1_vol[i] = ret =
 			max8997_get_voltage_proper_val(
 					&buck1245_voltage_map_desc,
-					pdata->buck1_voltage[i] / 1000,
-					pdata->buck1_voltage[i] / 1000 +
+					pdata->buck1_voltage[i],
+					pdata->buck1_voltage[i] +
 					buck1245_voltage_map_desc.step);
 		if (ret < 0)
 			goto err_out;
@@ -986,8 +984,8 @@ static __devinit int max8997_pmic_probe(
 		max8997->buck2_vol[i] = ret =
 			max8997_get_voltage_proper_val(
 					&buck1245_voltage_map_desc,
-					pdata->buck2_voltage[i] / 1000,
-					pdata->buck2_voltage[i] / 1000 +
+					pdata->buck2_voltage[i],
+					pdata->buck2_voltage[i] +
 					buck1245_voltage_map_desc.step);
 		if (ret < 0)
 			goto err_out;
@@ -995,8 +993,8 @@ static __devinit int max8997_pmic_probe(
 		max8997->buck5_vol[i] = ret =
 			max8997_get_voltage_proper_val(
 					&buck1245_voltage_map_desc,
-					pdata->buck5_voltage[i] / 1000,
-					pdata->buck5_voltage[i] / 1000 +
+					pdata->buck5_voltage[i],
+					pdata->buck5_voltage[i] +
 					buck1245_voltage_map_desc.step);
 		if (ret < 0)
 			goto err_out;

[ 182/221] regulator: max8998: Use uV in voltage_map_desc

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@ingics.com>

commit adf6178ad5552a7f2f742a8c85343c50f080c412 upstream.

Integer division may truncate.
This happens when pdata->buckx_voltagex setting is not align with 1000 uV.
Thus use uV in voltage_map_desc, this ensures the selected voltage won't less
than pdata buckx_voltagex settings.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/max8998.c |   42 +++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -51,39 +51,39 @@ struct voltage_map_desc {
 	int step;
 };
 
-/* Voltage maps */
+/* Voltage maps in uV*/
 static const struct voltage_map_desc ldo23_voltage_map_desc = {
-	.min = 800,	.step = 50,	.max = 1300,
+	.min = 800000,	.step = 50000,	.max = 1300000,
 };
 static const struct voltage_map_desc ldo456711_voltage_map_desc = {
-	.min = 1600,	.step = 100,	.max = 3600,
+	.min = 1600000,	.step = 100000,	.max = 3600000,
 };
 static const struct voltage_map_desc ldo8_voltage_map_desc = {
-	.min = 3000,	.step = 100,	.max = 3600,
+	.min = 3000000,	.step = 100000,	.max = 3600000,
 };
 static const struct voltage_map_desc ldo9_voltage_map_desc = {
-	.min = 2800,	.step = 100,	.max = 3100,
+	.min = 2800000,	.step = 100000,	.max = 3100000,
 };
 static const struct voltage_map_desc ldo10_voltage_map_desc = {
-	.min = 950,	.step = 50,	.max = 1300,
+	.min = 95000,	.step = 50000,	.max = 1300000,
 };
 static const struct voltage_map_desc ldo1213_voltage_map_desc = {
-	.min = 800,	.step = 100,	.max = 3300,
+	.min = 800000,	.step = 100000,	.max = 3300000,
 };
 static const struct voltage_map_desc ldo1415_voltage_map_desc = {
-	.min = 1200,	.step = 100,	.max = 3300,
+	.min = 1200000,	.step = 100000,	.max = 3300000,
 };
 static const struct voltage_map_desc ldo1617_voltage_map_desc = {
-	.min = 1600,	.step = 100,	.max = 3600,
+	.min = 1600000,	.step = 100000,	.max = 3600000,
 };
 static const struct voltage_map_desc buck12_voltage_map_desc = {
-	.min = 750,	.step = 25,	.max = 1525,
+	.min = 750000,	.step = 25000,	.max = 1525000,
 };
 static const struct voltage_map_desc buck3_voltage_map_desc = {
-	.min = 1600,	.step = 100,	.max = 3600,
+	.min = 1600000,	.step = 100000,	.max = 3600000,
 };
 static const struct voltage_map_desc buck4_voltage_map_desc = {
-	.min = 800,	.step = 100,	.max = 2300,
+	.min = 800000,	.step = 100000,	.max = 2300000,
 };
 
 static const struct voltage_map_desc *ldo_voltage_map[] = {
@@ -445,7 +445,7 @@ static int max8998_set_voltage_buck_time
 	if (max8998->iodev->type == TYPE_MAX8998 && !(val & MAX8998_ENRAMP))
 		return 0;
 
-	difference = (new_selector - old_selector) * desc->step;
+	difference = (new_selector - old_selector) * desc->step / 1000;
 	if (difference > 0)
 		return difference / ((val & 0x0f) + 1);
 
@@ -702,7 +702,7 @@ static __devinit int max8998_pmic_probe(
 		i = 0;
 		while (buck12_voltage_map_desc.min +
 		       buck12_voltage_map_desc.step*i
-		       < (pdata->buck1_voltage1 / 1000))
+		       < pdata->buck1_voltage1)
 			i++;
 		max8998->buck1_vol[0] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i);
@@ -713,7 +713,7 @@ static __devinit int max8998_pmic_probe(
 		i = 0;
 		while (buck12_voltage_map_desc.min +
 		       buck12_voltage_map_desc.step*i
-		       < (pdata->buck1_voltage2 / 1000))
+		       < pdata->buck1_voltage2)
 			i++;
 
 		max8998->buck1_vol[1] = i;
@@ -725,7 +725,7 @@ static __devinit int max8998_pmic_probe(
 		i = 0;
 		while (buck12_voltage_map_desc.min +
 		       buck12_voltage_map_desc.step*i
-		       < (pdata->buck1_voltage3 / 1000))
+		       < pdata->buck1_voltage3)
 			i++;
 
 		max8998->buck1_vol[2] = i;
@@ -737,7 +737,7 @@ static __devinit int max8998_pmic_probe(
 		i = 0;
 		while (buck12_voltage_map_desc.min +
 		       buck12_voltage_map_desc.step*i
-		       < (pdata->buck1_voltage4 / 1000))
+		       < pdata->buck1_voltage4)
 			i++;
 
 		max8998->buck1_vol[3] = i;
@@ -763,7 +763,7 @@ static __devinit int max8998_pmic_probe(
 		i = 0;
 		while (buck12_voltage_map_desc.min +
 		       buck12_voltage_map_desc.step*i
-		       < (pdata->buck2_voltage1 / 1000))
+		       < pdata->buck2_voltage1)
 			i++;
 		max8998->buck2_vol[0] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i);
@@ -774,7 +774,7 @@ static __devinit int max8998_pmic_probe(
 		i = 0;
 		while (buck12_voltage_map_desc.min +
 		       buck12_voltage_map_desc.step*i
-		       < (pdata->buck2_voltage2 / 1000))
+		       < pdata->buck2_voltage2)
 			i++;
 		max8998->buck2_vol[1] = i;
 		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i);
@@ -792,8 +792,8 @@ static __devinit int max8998_pmic_probe(
 			int count = (desc->max - desc->min) / desc->step + 1;
 
 			regulators[index].n_voltages = count;
-			regulators[index].min_uV = desc->min * 1000;
-			regulators[index].uV_step = desc->step * 1000;
+			regulators[index].min_uV = desc->min;
+			regulators[index].uV_step = desc->step;
 		}
 
 		config.dev = max8998->dev;

[ 183/221] regulator: max8998: Ensure enough delay time for max8998_set_voltage_buck_time_sel

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@ingics.com>

commit 81d0a6ae7befb24c06f4aa4856af7f8d1f612171 upstream.

Use DIV_ROUND_UP to prevent truncation by integer division issue.
This ensures we return enough delay time.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/max8998.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -447,7 +447,7 @@ static int max8998_set_voltage_buck_time
 
 	difference = (new_selector - old_selector) * desc->step / 1000;
 	if (difference > 0)
-		return difference / ((val & 0x0f) + 1);
+		return DIV_ROUND_UP(difference, (val & 0x0f) + 1);
 
 	return 0;
 }

[ 184/221] Revert "MIPS: Optimise TLB handlers for MIPS32/64 R2 cores."

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ralf Baechle <ralf@linux-mips.org>

commit 9120963578320532dfb3a9a7947e8d05b39900b5 upstream.

This reverts commit ff401e52100dcdc85e572d1ad376d3307b3fe28e.

This breaks on MIPS64 R2 cores such as Broadcom's.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/tlbex.c |   16 ----------------
 1 file changed, 16 deletions(-)

--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -952,13 +952,6 @@ build_get_pgde32(u32 **p, unsigned int t
 #endif
 	uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
 	uasm_i_lw(p, ptr, uasm_rel_lo(pgdc), ptr);
-
-	if (cpu_has_mips_r2) {
-		uasm_i_ext(p, tmp, tmp, PGDIR_SHIFT, (32 - PGDIR_SHIFT));
-		uasm_i_ins(p, ptr, tmp, PGD_T_LOG2, (32 - PGDIR_SHIFT));
-		return;
-	}
-
 	uasm_i_srl(p, tmp, tmp, PGDIR_SHIFT); /* get pgd only bits */
 	uasm_i_sll(p, tmp, tmp, PGD_T_LOG2);
 	uasm_i_addu(p, ptr, ptr, tmp); /* add in pgd offset */
@@ -994,15 +987,6 @@ static void __cpuinit build_adjust_conte
 
 static void __cpuinit build_get_ptep(u32 **p, unsigned int tmp, unsigned int ptr)
 {
-	if (cpu_has_mips_r2) {
-		/* PTE ptr offset is obtained from BadVAddr */
-		UASM_i_MFC0(p, tmp, C0_BADVADDR);
-		UASM_i_LW(p, ptr, 0, ptr);
-		uasm_i_ext(p, tmp, tmp, PAGE_SHIFT+1, PGDIR_SHIFT-PAGE_SHIFT-1);
-		uasm_i_ins(p, ptr, tmp, PTE_T_LOG2+1, PGDIR_SHIFT-PAGE_SHIFT-1);
-		return;
-	}
-
 	/*
 	 * Bug workaround for the Nevada. It seems as if under certain
 	 * circumstances the move from cp0_context might produce a

[ 185/221] dm thin: fix race between simultaneous io and discards to same block

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Thornber <ejt@redhat.com>

commit e8088073c9610af017fd47fddd104a2c3afb32e8 upstream.

There is a race when discard bios and non-discard bios are issued
simultaneously to the same block.

Discard support is expensive for all thin devices precisely because you
have to be careful to quiesce the area you're discarding.  DM thin must
handle this conflicting IO pattern (simultaneous non-discard vs discard)
even though a sane application shouldn't be issuing such IO.

The race manifests as follows:

1. A non-discard bio is mapped in thin_bio_map.
   This doesn't lock out parallel activity to the same block.

2. A discard bio is issued to the same block as the non-discard bio.

3. The discard bio is locked in a dm_bio_prison_cell in process_discard
   to lock out parallel activity against the same block.

4. The non-discard bio's mapping continues and its all_io_entry is
   incremented so the bio is accounted for in the thin pool's all_io_ds
   which is a dm_deferred_set used to track time locality of non-discard IO.

5. The non-discard bio is finally locked in a dm_bio_prison_cell in
   process_bio.

The race can result in deadlock, leaving the block layer hanging waiting
for completion of a discard bio that never completes, e.g.:

INFO: task ruby:15354 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ruby            D ffffffff8160f0e0     0 15354  15314 0x00000000
 ffff8802fb08bc58 0000000000000082 ffff8802fb08bfd8 0000000000012900
 ffff8802fb08a010 0000000000012900 0000000000012900 0000000000012900
 ffff8802fb08bfd8 0000000000012900 ffff8803324b9480 ffff88032c6f14c0
Call Trace:
 [<ffffffff814e5a19>] schedule+0x29/0x70
 [<ffffffff814e3d85>] schedule_timeout+0x195/0x220
 [<ffffffffa06b9bc1>] ? _dm_request+0x111/0x160 [dm_mod]
 [<ffffffff814e589e>] wait_for_common+0x11e/0x190
 [<ffffffff8107a170>] ? try_to_wake_up+0x2b0/0x2b0
 [<ffffffff814e59ed>] wait_for_completion+0x1d/0x20
 [<ffffffff81233289>] blkdev_issue_discard+0x219/0x260
 [<ffffffff81233e79>] blkdev_ioctl+0x6e9/0x7b0
 [<ffffffff8119a65c>] block_ioctl+0x3c/0x40
 [<ffffffff8117539c>] do_vfs_ioctl+0x8c/0x340
 [<ffffffff8119a547>] ? block_llseek+0x67/0xb0
 [<ffffffff811756f1>] sys_ioctl+0xa1/0xb0
 [<ffffffff810561f6>] ? sys_rt_sigprocmask+0x86/0xd0
 [<ffffffff814ef099>] system_call_fastpath+0x16/0x1b

The thinp-test-suite's test_discard_random_sectors reliably hits this
deadlock on fast SSD storage.

The fix for this race is that the all_io_entry for a bio must be
incremented whilst the dm_bio_prison_cell is held for the bio's
associated virtual and physical blocks.  That cell locking wasn't
occurring early enough in thin_bio_map.  This patch fixes this.

Care is taken to always call the new function inc_all_io_entry() with
the relevant cells locked, but they are generally unlocked before
calling issue() to try to avoid holding the cells locked across
generic_submit_request.

Also, now that thin_bio_map may lock bios in a cell, process_bio() is no
longer the only thread that will do so.  Because of this we must be sure
to use cell_defer_except() to release all non-holder entries, that
were added by the other thread, because they must be deferred.

This patch depends on "dm thin: replace dm_cell_release_singleton with
cell_defer_except".

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-thin.c |   84 +++++++++++++++++++++++++++++++++++----------------
 1 file changed, 59 insertions(+), 25 deletions(-)

--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -368,6 +368,17 @@ static int bio_triggers_commit(struct th
 		dm_thin_changed_this_transaction(tc->td);
 }
 
+static void inc_all_io_entry(struct pool *pool, struct bio *bio)
+{
+	struct dm_thin_endio_hook *h;
+
+	if (bio->bi_rw & REQ_DISCARD)
+		return;
+
+	h = dm_get_mapinfo(bio)->ptr;
+	h->all_io_entry = dm_deferred_entry_inc(pool->all_io_ds);
+}
+
 static void issue(struct thin_c *tc, struct bio *bio)
 {
 	struct pool *pool = tc->pool;
@@ -596,13 +607,15 @@ static void process_prepared_discard_pas
 {
 	struct thin_c *tc = m->tc;
 
+	inc_all_io_entry(tc->pool, m->bio);
+	cell_defer_except(tc, m->cell);
+	cell_defer_except(tc, m->cell2);
+
 	if (m->pass_discard)
 		remap_and_issue(tc, m->bio, m->data_block);
 	else
 		bio_endio(m->bio, 0);
 
-	cell_defer_except(tc, m->cell);
-	cell_defer_except(tc, m->cell2);
 	mempool_free(m, tc->pool->mapping_pool);
 }
 
@@ -710,6 +723,7 @@ static void schedule_copy(struct thin_c
 		h->overwrite_mapping = m;
 		m->bio = bio;
 		save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio);
+		inc_all_io_entry(pool, bio);
 		remap_and_issue(tc, bio, data_dest);
 	} else {
 		struct dm_io_region from, to;
@@ -779,6 +793,7 @@ static void schedule_zero(struct thin_c
 		h->overwrite_mapping = m;
 		m->bio = bio;
 		save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio);
+		inc_all_io_entry(pool, bio);
 		remap_and_issue(tc, bio, data_block);
 	} else {
 		int r;
@@ -961,13 +976,15 @@ static void process_discard(struct thin_
 				wake_worker(pool);
 			}
 		} else {
+			inc_all_io_entry(pool, bio);
+			cell_defer_except(tc, cell);
+			cell_defer_except(tc, cell2);
+
 			/*
 			 * The DM core makes sure that the discard doesn't span
 			 * a block boundary.  So we submit the discard of a
 			 * partial block appropriately.
 			 */
-			cell_defer_except(tc, cell);
-			cell_defer_except(tc, cell2);
 			if ((!lookup_result.shared) && pool->pf.discard_passdown)
 				remap_and_issue(tc, bio, lookup_result.block);
 			else
@@ -1039,8 +1056,9 @@ static void process_shared_bio(struct th
 		struct dm_thin_endio_hook *h = dm_get_mapinfo(bio)->ptr;
 
 		h->shared_read_entry = dm_deferred_entry_inc(pool->shared_read_ds);
-
+		inc_all_io_entry(pool, bio);
 		cell_defer_except(tc, cell);
+
 		remap_and_issue(tc, bio, lookup_result->block);
 	}
 }
@@ -1055,7 +1073,9 @@ static void provision_block(struct thin_
 	 * Remap empty bios (flushes) immediately, without provisioning.
 	 */
 	if (!bio->bi_size) {
+		inc_all_io_entry(tc->pool, bio);
 		cell_defer_except(tc, cell);
+
 		remap_and_issue(tc, bio, 0);
 		return;
 	}
@@ -1110,26 +1130,22 @@ static void process_bio(struct thin_c *t
 	r = dm_thin_find_block(tc->td, block, 1, &lookup_result);
 	switch (r) {
 	case 0:
-		/*
-		 * We can release this cell now.  This thread is the only
-		 * one that puts bios into a cell, and we know there were
-		 * no preceding bios.
-		 */
-		/*
-		 * TODO: this will probably have to change when discard goes
-		 * back in.
-		 */
-		cell_defer_except(tc, cell);
-
-		if (lookup_result.shared)
+		if (lookup_result.shared) {
 			process_shared_bio(tc, bio, block, &lookup_result);
-		else
+			cell_defer_except(tc, cell);
+		} else {
+			inc_all_io_entry(tc->pool, bio);
+			cell_defer_except(tc, cell);
+
 			remap_and_issue(tc, bio, lookup_result.block);
+		}
 		break;
 
 	case -ENODATA:
 		if (bio_data_dir(bio) == READ && tc->origin_dev) {
+			inc_all_io_entry(tc->pool, bio);
 			cell_defer_except(tc, cell);
+
 			remap_to_origin_and_issue(tc, bio);
 		} else
 			provision_block(tc, bio, block, cell);
@@ -1155,8 +1171,10 @@ static void process_bio_read_only(struct
 	case 0:
 		if (lookup_result.shared && (rw == WRITE) && bio->bi_size)
 			bio_io_error(bio);
-		else
+		else {
+			inc_all_io_entry(tc->pool, bio);
 			remap_and_issue(tc, bio, lookup_result.block);
+		}
 		break;
 
 	case -ENODATA:
@@ -1166,6 +1184,7 @@ static void process_bio_read_only(struct
 		}
 
 		if (tc->origin_dev) {
+			inc_all_io_entry(tc->pool, bio);
 			remap_to_origin_and_issue(tc, bio);
 			break;
 		}
@@ -1346,7 +1365,7 @@ static struct dm_thin_endio_hook *thin_h
 
 	h->tc = tc;
 	h->shared_read_entry = NULL;
-	h->all_io_entry = bio->bi_rw & REQ_DISCARD ? NULL : dm_deferred_entry_inc(pool->all_io_ds);
+	h->all_io_entry = NULL;
 	h->overwrite_mapping = NULL;
 
 	return h;
@@ -1363,6 +1382,8 @@ static int thin_bio_map(struct dm_target
 	dm_block_t block = get_bio_block(tc, bio);
 	struct dm_thin_device *td = tc->td;
 	struct dm_thin_lookup_result result;
+	struct dm_bio_prison_cell *cell1, *cell2;
+	struct dm_cell_key key;
 
 	map_context->ptr = thin_hook_bio(tc, bio);
 
@@ -1399,12 +1420,25 @@ static int thin_bio_map(struct dm_target
 			 * shared flag will be set in their case.
 			 */
 			thin_defer_bio(tc, bio);
-			r = DM_MAPIO_SUBMITTED;
-		} else {
-			remap(tc, bio, result.block);
-			r = DM_MAPIO_REMAPPED;
+			return DM_MAPIO_SUBMITTED;
 		}
-		break;
+
+		build_virtual_key(tc->td, block, &key);
+		if (dm_bio_detain(tc->pool->prison, &key, bio, &cell1))
+			return DM_MAPIO_SUBMITTED;
+
+		build_data_key(tc->td, result.block, &key);
+		if (dm_bio_detain(tc->pool->prison, &key, bio, &cell2)) {
+			cell_defer_except(tc, cell1);
+			return DM_MAPIO_SUBMITTED;
+		}
+
+		inc_all_io_entry(tc->pool, bio);
+		cell_defer_except(tc, cell2);
+		cell_defer_except(tc, cell1);
+
+		remap(tc, bio, result.block);
+		return DM_MAPIO_REMAPPED;
 
 	case -ENODATA:
 		if (get_pool_mode(tc->pool) == PM_READ_ONLY) {

[ 186/221] Revert: "rt2x00: Dont let mac80211 send a BAR when an AMPDU subframe fails"

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislaw Gruszka <sgruszka@redhat.com>

commit ab9d6e4ffe192427ce9e93d4f927b0faaa8a941e upstream.

This revert:

commit be03d4a45c09ee5100d3aaaedd087f19bc20d01f
Author: Andreas Hartmann <andihartmann@01019freenet.de>
Date:   Tue Apr 17 00:25:28 2012 +0200

    rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails

To fix problem workaround by above commit use
IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL flag (see change log for
"mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL" patch).

Resolve: https://bugzilla.kernel.org/show_bug.cgi?id=42828
Bisected-by: Francisco Pina Martins <f.pinamartins@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rt2x00/rt2800lib.c |    3 ++-
 drivers/net/wireless/rt2x00/rt2x00dev.c |    7 +++----
 2 files changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -5036,7 +5036,8 @@ static int rt2800_probe_hw_mode(struct r
 	    IEEE80211_HW_SUPPORTS_PS |
 	    IEEE80211_HW_PS_NULLFUNC_STACK |
 	    IEEE80211_HW_AMPDU_AGGREGATION |
-	    IEEE80211_HW_REPORTS_TX_ACK_STATUS;
+	    IEEE80211_HW_REPORTS_TX_ACK_STATUS |
+	    IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL;
 
 	/*
 	 * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -391,10 +391,9 @@ void rt2x00lib_txdone(struct queue_entry
 		tx_info->flags |= IEEE80211_TX_STAT_AMPDU;
 		tx_info->status.ampdu_len = 1;
 		tx_info->status.ampdu_ack_len = success ? 1 : 0;
-		/*
-		 * TODO: Need to tear down BA session here
-		 * if not successful.
-		 */
+
+		if (!success)
+			tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
 	}
 
 	if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {

[ 187/221] EDAC: Fix kernel panic on module unloading

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Khlebnikov <khlebnikov@openvz.org>

commit 311bd84247ee0bedae6cdfbfc5e2c3450f9decd1 upstream.

This patch fixes use-after-free and double-free bugs in
edac_mc_sysfs_exit(). mci_pdev has single reference and put_device()
calls mc_attr_release() which calls kfree(). The following
device_del() works with already released memory. An another kfree() in
edac_mc_sysfs_exit() releses the same memory again. Great.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Denis Kirjanov <kirjanov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Link: http://lkml.kernel.org/r/20121214110310.11019.21098.stgit@zurg
Signed-off-by: Borislav Petkov <bp@alien8.de>
[ a partial 3.7.y backport ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/edac/edac_mc_sysfs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -1145,7 +1145,7 @@ int __init edac_mc_sysfs_init(void)
 
 void __exit edac_mc_sysfs_exit(void)
 {
-	put_device(mci_pdev);
 	device_del(mci_pdev);
+	put_device(mci_pdev);
 	edac_put_sysfs_subsys();
 }

[ 188/221] drm/i915: disable cpt phase pointer fdi rx workaround

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit 539526b4137bc0e7a8806c38c8522f226814a0e6 upstream.

We've originally added this in

commit 291427f5fdadec6e4be2924172e83588880e1539
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Fri Jul 29 12:42:37 2011 -0700

    drm/i915: apply phase pointer override on SNB+ too

and then copy-pasted it over to ivb/ppt. The w/a was originally added
for ilk/ibx in

commit 5b2adf897146edeac6a1e438fb67b5a53dbbdf34
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Oct 7 16:01:15 2010 -0700

    drm/i915: add Ironlake clock gating workaround for FDI link training

and fixed up a bit in

commit 6f06ce184c765fd8d50669a8d12fdd566c920859
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Tue Jan 4 15:09:38 2011 -0800

    drm/i915: set phase sync pointer override enable before setting phase sync pointer

It turns out that this w/a isn't actually required on cpt/ppt and
positively harmful on ivb/ppt when using fdi B/C links - it results in
a black screen occasionally, with seemingfully everything working as
it should. The only failure indication I've found in the hw is that
eventually (but not right after the modeset completes) a pipe underrun
is signalled.

Big thanks to Arthur Runyan for all the ideas for registers to check
and changes to test, otherwise I couldn't ever have tracked this down!

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "Runyan, Arthur J" <arthur.j.runyan@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_display.c |   31 -------------------------------
 1 file changed, 31 deletions(-)

--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2302,18 +2302,6 @@ static void intel_fdi_normal_train(struc
 			   FDI_FE_ERRC_ENABLE);
 }
 
-static void cpt_phase_pointer_enable(struct drm_device *dev, int pipe)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 flags = I915_READ(SOUTH_CHICKEN1);
-
-	flags |= FDI_PHASE_SYNC_OVR(pipe);
-	I915_WRITE(SOUTH_CHICKEN1, flags); /* once to unlock... */
-	flags |= FDI_PHASE_SYNC_EN(pipe);
-	I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to enable */
-	POSTING_READ(SOUTH_CHICKEN1);
-}
-
 /* The FDI link training functions for ILK/Ibexpeak. */
 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
 {
@@ -2464,9 +2452,6 @@ static void gen6_fdi_link_train(struct d
 	POSTING_READ(reg);
 	udelay(150);
 
-	if (HAS_PCH_CPT(dev))
-		cpt_phase_pointer_enable(dev, pipe);
-
 	for (i = 0; i < 4; i++) {
 		reg = FDI_TX_CTL(pipe);
 		temp = I915_READ(reg);
@@ -2593,9 +2578,6 @@ static void ivb_manual_fdi_link_train(st
 	POSTING_READ(reg);
 	udelay(150);
 
-	if (HAS_PCH_CPT(dev))
-		cpt_phase_pointer_enable(dev, pipe);
-
 	for (i = 0; i < 4; i++) {
 		reg = FDI_TX_CTL(pipe);
 		temp = I915_READ(reg);
@@ -2737,17 +2719,6 @@ static void ironlake_fdi_pll_disable(str
 	udelay(100);
 }
 
-static void cpt_phase_pointer_disable(struct drm_device *dev, int pipe)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 flags = I915_READ(SOUTH_CHICKEN1);
-
-	flags &= ~(FDI_PHASE_SYNC_EN(pipe));
-	I915_WRITE(SOUTH_CHICKEN1, flags); /* once to disable... */
-	flags &= ~(FDI_PHASE_SYNC_OVR(pipe));
-	I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to lock */
-	POSTING_READ(SOUTH_CHICKEN1);
-}
 static void ironlake_fdi_disable(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -2777,8 +2748,6 @@ static void ironlake_fdi_disable(struct
 		I915_WRITE(FDI_RX_CHICKEN(pipe),
 			   I915_READ(FDI_RX_CHICKEN(pipe) &
 				     ~FDI_RX_PHASE_SYNC_POINTER_EN));
-	} else if (HAS_PCH_CPT(dev)) {
-		cpt_phase_pointer_disable(dev, pipe);
 	}
 
 	/* still set train pattern 1 */

[ 189/221] KVM: PPC: 44x: fix DCR read/write

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Graf <agraf@suse.de>

commit e43a028752fed049e4bd94ef895542f96d79fa74 upstream.

When remembering the direction of a DCR transaction, we should write
to the same variable that we interpret on later when doing vcpu_run
again.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/44x_emulate.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/powerpc/kvm/44x_emulate.c
+++ b/arch/powerpc/kvm/44x_emulate.c
@@ -76,6 +76,7 @@ int kvmppc_core_emulate_op(struct kvm_ru
 				run->dcr.dcrn = dcrn;
 				run->dcr.data =  0;
 				run->dcr.is_write = 0;
+				vcpu->arch.dcr_is_write = 0;
 				vcpu->arch.io_gpr = rt;
 				vcpu->arch.dcr_needed = 1;
 				kvmppc_account_exit(vcpu, DCR_EXITS);
@@ -94,6 +95,7 @@ int kvmppc_core_emulate_op(struct kvm_ru
 				run->dcr.dcrn = dcrn;
 				run->dcr.data = kvmppc_get_gpr(vcpu, rs);
 				run->dcr.is_write = 1;
+				vcpu->arch.dcr_is_write = 1;
 				vcpu->arch.dcr_needed = 1;
 				kvmppc_account_exit(vcpu, DCR_EXITS);
 				emulated = EMULATE_DO_DCR;

[ 190/221] libceph: socket can close in any connection state

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Elder <elder@inktank.com>

(cherry picked from commit 7bb21d68c535ad8be38e14a715632ae398b37ac1)

A connection's socket can close for any reason, independent of the
state of the connection (and without irrespective of the connection
mutex).  As a result, the connectino can be in pretty much any state
at the time its socket is closed.

Handle those other cases at the top of con_work().  Pull this whole
block of code into a separate function to reduce the clutter.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/messenger.c |   47 ++++++++++++++++++++++++++++++-----------------
 1 file changed, 30 insertions(+), 17 deletions(-)

--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -2262,6 +2262,35 @@ static void queue_con(struct ceph_connec
 	}
 }
 
+static bool con_sock_closed(struct ceph_connection *con)
+{
+	if (!test_and_clear_bit(CON_FLAG_SOCK_CLOSED, &con->flags))
+		return false;
+
+#define CASE(x)								\
+	case CON_STATE_ ## x:						\
+		con->error_msg = "socket closed (con state " #x ")";	\
+		break;
+
+	switch (con->state) {
+	CASE(CLOSED);
+	CASE(PREOPEN);
+	CASE(CONNECTING);
+	CASE(NEGOTIATING);
+	CASE(OPEN);
+	CASE(STANDBY);
+	default:
+		pr_warning("%s con %p unrecognized state %lu\n",
+			__func__, con, con->state);
+		con->error_msg = "unrecognized con state";
+		BUG();
+		break;
+	}
+#undef CASE
+
+	return true;
+}
+
 /*
  * Do some work on a connection.  Drop a connection ref when we're done.
  */
@@ -2273,24 +2302,8 @@ static void con_work(struct work_struct
 
 	mutex_lock(&con->mutex);
 restart:
-	if (test_and_clear_bit(CON_FLAG_SOCK_CLOSED, &con->flags)) {
-		switch (con->state) {
-		case CON_STATE_CONNECTING:
-			con->error_msg = "connection failed";
-			break;
-		case CON_STATE_NEGOTIATING:
-			con->error_msg = "negotiation failed";
-			break;
-		case CON_STATE_OPEN:
-			con->error_msg = "socket closed";
-			break;
-		default:
-			dout("unrecognized con state %d\n", (int)con->state);
-			con->error_msg = "unrecognized con state";
-			BUG();
-		}
+	if (con_sock_closed(con))
 		goto fault;
-	}
 
 	if (test_and_clear_bit(CON_FLAG_BACKOFF, &con->flags)) {
 		dout("con_work %p backing off\n", con);

[ 191/221] libceph: report connection fault with warning

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Elder <elder@inktank.com>

(cherry picked from commit 28362986f8743124b3a0fda20a8ed3e80309cce1)

When a connection's socket disconnects, or if there's a protocol
error of some kind on the connection, a fault is signaled and
the connection is reset (closed and reopened, basically).  We
currently get an error message on the log whenever this occurs.

A ceph connection will attempt to reestablish a socket connection
repeatedly if a fault occurs.  This means that these error messages
will get repeatedly added to the log, which is undesirable.

Change the error message to be a warning, so they don't get
logged by default.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/messenger.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -2369,7 +2369,7 @@ fault:
 static void ceph_fault(struct ceph_connection *con)
 	__releases(con->mutex)
 {
-	pr_err("%s%lld %s %s\n", ENTITY_NAME(con->peer_name),
+	pr_warning("%s%lld %s %s\n", ENTITY_NAME(con->peer_name),
 	       ceph_pr_addr(&con->peer_addr.in_addr), con->error_msg);
 	dout("fault %p state %lu to peer %s\n",
 	     con, con->state, ceph_pr_addr(&con->peer_addr.in_addr));

[ 192/221] libceph: init osd->o_node in create_osd()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Elder <elder@inktank.com>

(cherry picked from commit f407731d12214e7686819018f3a1e9d7b6f83a02)

The red-black node node in the ceph osd structure is not initialized
in create_osd().  Because this node can be the subject of a
RB_EMPTY_NODE() call later on, we should ensure the node is
initialized properly for that.  Add a call to RB_CLEAR_NODE()
initialize it.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/osd_client.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -647,6 +647,7 @@ static struct ceph_osd *create_osd(struc
 	atomic_set(&osd->o_ref, 1);
 	osd->o_osdc = osdc;
 	osd->o_osd = onum;
+	RB_CLEAR_NODE(&osd->o_node);
 	INIT_LIST_HEAD(&osd->o_requests);
 	INIT_LIST_HEAD(&osd->o_linger_requests);
 	INIT_LIST_HEAD(&osd->o_osd_lru);

[ 193/221] libceph: init event->node in ceph_osdc_create_event()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Elder <elder@inktank.com>

(cherry picked from commit 3ee5234df68d253c415ba4f2db72ad250d9c21a9)

The red-black node node in the ceph osd event structure is not
initialized in create_osdc_create_event().  Because this node can
be the subject of a RB_EMPTY_NODE() call later on, we should ensure
the node is initialized properly for that.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/osd_client.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1600,6 +1600,7 @@ int ceph_osdc_create_event(struct ceph_o
 	event->data = data;
 	event->osdc = osdc;
 	INIT_LIST_HEAD(&event->osd_node);
+	RB_CLEAR_NODE(&event->node);
 	kref_init(&event->kref);   /* one ref for us */
 	kref_get(&event->kref);    /* one ref for the caller */
 	init_completion(&event->completion);

[ 194/221] libceph: dont use rb_init_node() in ceph_osdc_alloc_request()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Elder <elder@inktank.com>

(cherry picked from commit a978fa20fb657548561dddbfb605fe43654f0825)

The red-black node in the ceph osd request structure is initialized
in ceph_osdc_alloc_request() using rbd_init_node().  We do need to
initialize this, because in __unregister_request() we call
RB_EMPTY_NODE(), which expects the node it's checking to have
been initialized.  But rb_init_node() is apparently overkill, and
may in fact be on its way out.  So use RB_CLEAR_NODE() instead.

For a little more background, see this commit:
    4c199a93 rbtree: empty nodes have no color"

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/osd_client.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -221,6 +221,7 @@ struct ceph_osd_request *ceph_osdc_alloc
 	kref_init(&req->r_kref);
 	init_completion(&req->r_completion);
 	init_completion(&req->r_safe_completion);
+	RB_CLEAR_NODE(&req->r_node);
 	INIT_LIST_HEAD(&req->r_unsafe_item);
 	INIT_LIST_HEAD(&req->r_linger_item);
 	INIT_LIST_HEAD(&req->r_linger_osd);

[ 195/221] libceph: register request before unregister linger

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Elder <elder@inktank.com>

(cherry picked from commit c89ce05e0c5a01a256100ac6a6019f276bdd1ca6)

In kick_requests(), we need to register the request before we
unregister the linger request.  Otherwise the unregister will
reset the request's osd pointer to NULL.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/osd_client.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1366,8 +1366,8 @@ static void kick_requests(struct ceph_os
 
 		dout("kicking lingering %p tid %llu osd%d\n", req, req->r_tid,
 		     req->r_osd ? req->r_osd->o_osd : -1);
-		__unregister_linger_request(osdc, req);
 		__register_request(osdc, req);
+		__unregister_linger_request(osdc, req);
 	}
 	mutex_unlock(&osdc->request_mutex);
 

[ 196/221] libceph: move linger requests sooner in kick_requests()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Elder <elder@inktank.com>

(cherry picked from commit ab60b16d3c31b9bd9fd5b39f97dc42c52a50b67d)

The kick_requests() function is called by ceph_osdc_handle_map()
when an osd map change has been indicated.  Its purpose is to
re-queue any request whose target osd is different from what it
was when it was originally sent.

It is structured as two loops, one for incomplete but registered
requests, and a second for handling completed linger requests.
As a special case, in the first loop if a request marked to linger
has not yet completed, it is moved from the request list to the
linger list.  This is as a quick and dirty way to have the second
loop handle sending the request along with all the other linger
requests.

Because of the way it's done now, however, this quick and dirty
solution can result in these incomplete linger requests never
getting re-sent as desired.  The problem lies in the fact that
the second loop only arranges for a linger request to be sent
if it appears its target osd has changed.  This is the proper
handling for *completed* linger requests (it avoids issuing
the same linger request twice to the same osd).

But although the linger requests added to the list in the first loop
may have been sent, they have not yet completed, so they need to be
re-sent regardless of whether their target osd has changed.

The first required fix is we need to avoid calling __map_request()
on any incomplete linger request.  Otherwise the subsequent
__map_request() call in the second loop will find the target osd
has not changed and will therefore not re-send the request.

Second, we need to be sure that a sent but incomplete linger request
gets re-sent.  If the target osd is the same with the new osd map as
it was when the request was originally sent, this won't happen.
This can be fixed through careful handling when we move these
requests from the request list to the linger list, by unregistering
the request *before* it is registered as a linger request.  This
works because a side-effect of unregistering the request is to make
the request's r_osd pointer be NULL, and *that* will ensure the
second loop actually re-sends the linger request.

Processing of such a request is done at that point, so continue with
the next one once it's been moved.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/osd_client.c |   30 +++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 11 deletions(-)

--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1322,6 +1322,24 @@ static void kick_requests(struct ceph_os
 	for (p = rb_first(&osdc->requests); p; ) {
 		req = rb_entry(p, struct ceph_osd_request, r_node);
 		p = rb_next(p);
+
+		/*
+		 * For linger requests that have not yet been
+		 * registered, move them to the linger list; they'll
+		 * be sent to the osd in the loop below.  Unregister
+		 * the request before re-registering it as a linger
+		 * request to ensure the __map_request() below
+		 * will decide it needs to be sent.
+		 */
+		if (req->r_linger && list_empty(&req->r_linger_item)) {
+			dout("%p tid %llu restart on osd%d\n",
+			     req, req->r_tid,
+			     req->r_osd ? req->r_osd->o_osd : -1);
+			__unregister_request(osdc, req);
+			__register_linger_request(osdc, req);
+			continue;
+		}
+
 		err = __map_request(osdc, req, force_resend);
 		if (err < 0)
 			continue;  /* error */
@@ -1336,17 +1354,6 @@ static void kick_requests(struct ceph_os
 				req->r_flags |= CEPH_OSD_FLAG_RETRY;
 			}
 		}
-		if (req->r_linger && list_empty(&req->r_linger_item)) {
-			/*
-			 * register as a linger so that we will
-			 * re-submit below and get a new tid
-			 */
-			dout("%p tid %llu restart on osd%d\n",
-			     req, req->r_tid,
-			     req->r_osd ? req->r_osd->o_osd : -1);
-			__register_linger_request(osdc, req);
-			__unregister_request(osdc, req);
-		}
 	}
 
 	list_for_each_entry_safe(req, nreq, &osdc->req_linger,
@@ -1354,6 +1361,7 @@ static void kick_requests(struct ceph_os
 		dout("linger req=%p req->r_osd=%p\n", req, req->r_osd);
 
 		err = __map_request(osdc, req, force_resend);
+		dout("__map_request returned %d\n", err);
 		if (err == 0)
 			continue;  /* no change and no osd was specified */
 		if (err < 0)

[ 197/221] libceph: always reset osds when kicking

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Elder <elder@inktank.com>

(cherry picked from commit e6d50f67a6b1a6252a616e6e629473b5c4277218)

When ceph_osdc_handle_map() is called to process a new osd map,
kick_requests() is called to ensure all affected requests are
updated if necessary to reflect changes in the osd map.  This
happens in two cases:  whenever an incremental map update is
processed; and when a full map update (or the last one if there is
more than one) gets processed.

In the former case, the kick_requests() call is followed immediately
by a call to reset_changed_osds() to ensure any connections to osds
affected by the map change are reset.  But for full map updates
this isn't done.

Both cases should be doing this osd reset.

Rather than duplicating the reset_changed_osds() call, move it into
the end of kick_requests().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/osd_client.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1308,7 +1308,7 @@ static void reset_changed_osds(struct ce
  * Requeue requests whose mapping to an OSD has changed.  If requests map to
  * no osd, request a new map.
  *
- * Caller should hold map_sem for read and request_mutex.
+ * Caller should hold map_sem for read.
  */
 static void kick_requests(struct ceph_osd_client *osdc, int force_resend)
 {
@@ -1383,6 +1383,7 @@ static void kick_requests(struct ceph_os
 		dout("%d requests for down osds, need new map\n", needmap);
 		ceph_monc_request_next_osdmap(&osdc->client->monc);
 	}
+	reset_changed_osds(osdc);
 }
 
 
@@ -1439,7 +1440,6 @@ void ceph_osdc_handle_map(struct ceph_os
 				osdc->osdmap = newmap;
 			}
 			kick_requests(osdc, 0);
-			reset_changed_osds(osdc);
 		} else {
 			dout("ignoring incremental map %u len %d\n",
 			     epoch, maplen);

[ 198/221] libceph: WARN, dont BUG on unexpected connection states

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Elder <elder@inktank.com>

(cherry picked from commit 122070a2ffc91f87fe8e8493eb0ac61986c5557c)

A number of assertions in the ceph messenger are implemented with
BUG_ON(), killing the system if connection's state doesn't match
what's expected.  At this point our state model is (evidently) not
well understood enough for these assertions to trigger a BUG().
Convert all BUG_ON(con->state...) calls to be WARN_ON(con->state...)
so we learn about these issues without killing the machine.

We now recognize that a connection fault can occur due to a socket
closure at any time, regardless of the state of the connection.  So
there is really nothing we can assert about the state of the
connection at that point so eliminate that assertion.

Reported-by: Ugis <ugis22@gmail.com>
Tested-by: Ugis <ugis22@gmail.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/messenger.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -561,7 +561,7 @@ void ceph_con_open(struct ceph_connectio
 	mutex_lock(&con->mutex);
 	dout("con_open %p %s\n", con, ceph_pr_addr(&addr->in_addr));
 
-	BUG_ON(con->state != CON_STATE_CLOSED);
+	WARN_ON(con->state != CON_STATE_CLOSED);
 	con->state = CON_STATE_PREOPEN;
 
 	con->peer_name.type = (__u8) entity_type;
@@ -1509,7 +1509,7 @@ static int process_banner(struct ceph_co
 static void fail_protocol(struct ceph_connection *con)
 {
 	reset_connection(con);
-	BUG_ON(con->state != CON_STATE_NEGOTIATING);
+	WARN_ON(con->state != CON_STATE_NEGOTIATING);
 	con->state = CON_STATE_CLOSED;
 }
 
@@ -1635,7 +1635,7 @@ static int process_connect(struct ceph_c
 			return -1;
 		}
 
-		BUG_ON(con->state != CON_STATE_NEGOTIATING);
+		WARN_ON(con->state != CON_STATE_NEGOTIATING);
 		con->state = CON_STATE_OPEN;
 
 		con->peer_global_seq = le32_to_cpu(con->in_reply.global_seq);
@@ -2132,7 +2132,6 @@ more:
 		if (ret < 0)
 			goto out;
 
-		BUG_ON(con->state != CON_STATE_CONNECTING);
 		con->state = CON_STATE_NEGOTIATING;
 
 		/*
@@ -2160,7 +2159,7 @@ more:
 		goto more;
 	}
 
-	BUG_ON(con->state != CON_STATE_OPEN);
+	WARN_ON(con->state != CON_STATE_OPEN);
 
 	if (con->in_base_pos < 0) {
 		/*
@@ -2374,7 +2373,7 @@ static void ceph_fault(struct ceph_conne
 	dout("fault %p state %lu to peer %s\n",
 	     con, con->state, ceph_pr_addr(&con->peer_addr.in_addr));
 
-	BUG_ON(con->state != CON_STATE_CONNECTING &&
+	WARN_ON(con->state != CON_STATE_CONNECTING &&
 	       con->state != CON_STATE_NEGOTIATING &&
 	       con->state != CON_STATE_OPEN);
 

[ 199/221] Revert "drm/i915: no lvds quirk for Zotac ZDBOX SD ID12/ID13"

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit 48e858340dae43189a4e55647f6eac736766f828 upstream.

This reverts commit 9756fe38d10b2bf90c81dc4d2f17d5632e135364.

The bogus lvds output is actually a lvds->hdmi bridge, which we don't
really support. But unconditionally disabling it breaks some existing
setups.

Reported-by: John Tapsell <johnflux@gmail.com>
References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/17237
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/gpu/drm/i915/intel_lvds.c |    8 --------
 1 file changed, 8 deletions(-)

--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -763,14 +763,6 @@ static const struct dmi_system_id intel_
 	},
 	{
 		.callback = intel_no_lvds_dmi_callback,
-		.ident = "ZOTAC ZBOXSD-ID12/ID13",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "ZOTAC"),
-			DMI_MATCH(DMI_BOARD_NAME, "ZBOXSD-ID12/ID13"),
-		},
-	},
-	{
-		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Gigabyte GA-D525TUD",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),

[ 200/221] libceph: fix protocol feature mismatch failure path

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Sage Weil <sage@inktank.com>

(cherry picked from commit 0fa6ebc600bc8e830551aee47a0e929e818a1868)

We should not set con->state to CLOSED here; that happens in
ceph_fault() in the caller, where it first asserts that the state
is not yet CLOSED.  Avoids a BUG when the features don't match.

Since the fail_protocol() has become a trivial wrapper, replace
calls to it with direct calls to reset_connection().

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/messenger.c |   14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -506,6 +506,7 @@ static void reset_connection(struct ceph
 {
 	/* reset connection, out_queue, msg_ and connect_seq */
 	/* discard existing out_queue and msg_seq */
+	dout("reset_connection %p\n", con);
 	ceph_msg_remove_list(&con->out_queue);
 	ceph_msg_remove_list(&con->out_sent);
 
@@ -1506,13 +1507,6 @@ static int process_banner(struct ceph_co
 	return 0;
 }
 
-static void fail_protocol(struct ceph_connection *con)
-{
-	reset_connection(con);
-	WARN_ON(con->state != CON_STATE_NEGOTIATING);
-	con->state = CON_STATE_CLOSED;
-}
-
 static int process_connect(struct ceph_connection *con)
 {
 	u64 sup_feat = con->msgr->supported_features;
@@ -1530,7 +1524,7 @@ static int process_connect(struct ceph_c
 		       ceph_pr_addr(&con->peer_addr.in_addr),
 		       sup_feat, server_feat, server_feat & ~sup_feat);
 		con->error_msg = "missing required protocol features";
-		fail_protocol(con);
+		reset_connection(con);
 		return -1;
 
 	case CEPH_MSGR_TAG_BADPROTOVER:
@@ -1541,7 +1535,7 @@ static int process_connect(struct ceph_c
 		       le32_to_cpu(con->out_connect.protocol_version),
 		       le32_to_cpu(con->in_reply.protocol_version));
 		con->error_msg = "protocol version mismatch";
-		fail_protocol(con);
+		reset_connection(con);
 		return -1;
 
 	case CEPH_MSGR_TAG_BADAUTHORIZER:
@@ -1631,7 +1625,7 @@ static int process_connect(struct ceph_c
 			       ceph_pr_addr(&con->peer_addr.in_addr),
 			       req_feat, server_feat, req_feat & ~server_feat);
 			con->error_msg = "missing required protocol features";
-			fail_protocol(con);
+			reset_connection(con);
 			return -1;
 		}
 

[ 201/221] libceph: fix osdmap decode error paths

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Sage Weil <sage@inktank.com>

(cherry picked from commit 0ed7285e0001b960c888e5455ae982025210ed3d)

Ensure that we set the err value correctly so that we do not pass a 0
value to ERR_PTR and confuse the calling code.  (In particular,
osd_client.c handle_map() will BUG(!newmap)).

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/osdmap.c |   31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

--- a/net/ceph/osdmap.c
+++ b/net/ceph/osdmap.c
@@ -645,10 +645,12 @@ struct ceph_osdmap *osdmap_decode(void *
 	ceph_decode_32_safe(p, end, max, bad);
 	while (max--) {
 		ceph_decode_need(p, end, 4 + 1 + sizeof(pi->v), bad);
+		err = -ENOMEM;
 		pi = kzalloc(sizeof(*pi), GFP_NOFS);
 		if (!pi)
 			goto bad;
 		pi->id = ceph_decode_32(p);
+		err = -EINVAL;
 		ev = ceph_decode_8(p); /* encoding version */
 		if (ev > CEPH_PG_POOL_VERSION) {
 			pr_warning("got unknown v %d > %d of ceph_pg_pool\n",
@@ -664,8 +666,13 @@ struct ceph_osdmap *osdmap_decode(void *
 		__insert_pg_pool(&map->pg_pools, pi);
 	}
 
-	if (version >= 5 && __decode_pool_names(p, end, map) < 0)
-		goto bad;
+	if (version >= 5) {
+		err = __decode_pool_names(p, end, map);
+		if (err < 0) {
+			dout("fail to decode pool names");
+			goto bad;
+		}
+	}
 
 	ceph_decode_32_safe(p, end, map->pool_max, bad);
 
@@ -745,7 +752,7 @@ struct ceph_osdmap *osdmap_decode(void *
 	return map;
 
 bad:
-	dout("osdmap_decode fail\n");
+	dout("osdmap_decode fail err %d\n", err);
 	ceph_osdmap_destroy(map);
 	return ERR_PTR(err);
 }
@@ -839,6 +846,7 @@ struct ceph_osdmap *osdmap_apply_increme
 		if (ev > CEPH_PG_POOL_VERSION) {
 			pr_warning("got unknown v %d > %d of ceph_pg_pool\n",
 				   ev, CEPH_PG_POOL_VERSION);
+			err = -EINVAL;
 			goto bad;
 		}
 		pi = __lookup_pg_pool(&map->pg_pools, pool);
@@ -855,8 +863,11 @@ struct ceph_osdmap *osdmap_apply_increme
 		if (err < 0)
 			goto bad;
 	}
-	if (version >= 5 && __decode_pool_names(p, end, map) < 0)
-		goto bad;
+	if (version >= 5) {
+		err = __decode_pool_names(p, end, map);
+		if (err < 0)
+			goto bad;
+	}
 
 	/* old_pool */
 	ceph_decode_32_safe(p, end, len, bad);
@@ -932,15 +943,13 @@ struct ceph_osdmap *osdmap_apply_increme
 			(void) __remove_pg_mapping(&map->pg_temp, pgid);
 
 			/* insert */
-			if (pglen > (UINT_MAX - sizeof(*pg)) / sizeof(u32)) {
-				err = -EINVAL;
+			err = -EINVAL;
+			if (pglen > (UINT_MAX - sizeof(*pg)) / sizeof(u32))
 				goto bad;
-			}
+			err = -ENOMEM;
 			pg = kmalloc(sizeof(*pg) + sizeof(u32)*pglen, GFP_NOFS);
-			if (!pg) {
-				err = -ENOMEM;
+			if (!pg)
 				goto bad;
-			}
 			pg->pgid = pgid;
 			pg->len = pglen;
 			for (j = 0; j < pglen; j++)

[ 202/221] libceph: avoid using freed osd in __kick_osd_requests()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Alex Elder <elder@inktank.com>

(cherry picked from commit 685a7555ca69030739ddb57a47f0ea8ea80196a4)

If an osd has no requests and no linger requests, __reset_osd()
will just remove it with a call to __remove_osd().  That drops
a reference to the osd, and therefore the osd may have been free
by the time __reset_osd() returns.  That function offers no
indication this may have occurred, and as a result the osd will
continue to be used even when it's no longer valid.

Change__reset_osd() so it returns an error (ENODEV) when it
deletes the osd being reset.  And change __kick_osd_requests() so it
returns immediately (before referencing osd again) if __reset_osd()
returns *any* error.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/osd_client.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -581,7 +581,7 @@ static void __kick_osd_requests(struct c
 
 	dout("__kick_osd_requests osd%d\n", osd->o_osd);
 	err = __reset_osd(osdc, osd);
-	if (err == -EAGAIN)
+	if (err)
 		return;
 
 	list_for_each_entry(req, &osd->o_requests, r_osd_item) {
@@ -752,6 +752,7 @@ static int __reset_osd(struct ceph_osd_c
 	if (list_empty(&osd->o_requests) &&
 	    list_empty(&osd->o_linger_requests)) {
 		__remove_osd(osdc, osd);
+		ret = -ENODEV;
 	} else if (memcmp(&osdc->osdmap->osd_addr[osd->o_osd],
 			  &osd->o_con.peer_addr,
 			  sizeof(osd->o_con.peer_addr)) == 0 &&

[ 203/221] libceph: remove osdtimeout option

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Sage Weil <sage@inktank.com>

(cherry picked from commit 83aff95eb9d60aff5497e9f44a2ae906b86d8e88)

This would reset a connection with any OSD that had an outstanding
request that was taking more than N seconds.  The idea was that if the
OSD was buggy, the client could compensate by resending the request.

In reality, this only served to hide server bugs, and we haven't
actually seen such a bug in quite a while.  Moreover, the userspace
client code never did this.

More importantly, often the request is taking a long time because the
OSD is trying to recover, or overloaded, and killing the connection
and retrying would only make the situation worse by giving the OSD
more work to do.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ceph/super.c              |    2 -
 include/linux/ceph/libceph.h |    2 -
 net/ceph/ceph_common.c       |    3 --
 net/ceph/osd_client.c        |   47 +++----------------------------------------
 4 files changed, 5 insertions(+), 49 deletions(-)

--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -403,8 +403,6 @@ static int ceph_show_options(struct seq_
 		seq_printf(m, ",mount_timeout=%d", opt->mount_timeout);
 	if (opt->osd_idle_ttl != CEPH_OSD_IDLE_TTL_DEFAULT)
 		seq_printf(m, ",osd_idle_ttl=%d", opt->osd_idle_ttl);
-	if (opt->osd_timeout != CEPH_OSD_TIMEOUT_DEFAULT)
-		seq_printf(m, ",osdtimeout=%d", opt->osd_timeout);
 	if (opt->osd_keepalive_timeout != CEPH_OSD_KEEPALIVE_DEFAULT)
 		seq_printf(m, ",osdkeepalivetimeout=%d",
 			   opt->osd_keepalive_timeout);
--- a/include/linux/ceph/libceph.h
+++ b/include/linux/ceph/libceph.h
@@ -43,7 +43,6 @@ struct ceph_options {
 	struct ceph_entity_addr my_addr;
 	int mount_timeout;
 	int osd_idle_ttl;
-	int osd_timeout;
 	int osd_keepalive_timeout;
 
 	/*
@@ -63,7 +62,6 @@ struct ceph_options {
  * defaults
  */
 #define CEPH_MOUNT_TIMEOUT_DEFAULT  60
-#define CEPH_OSD_TIMEOUT_DEFAULT    60  /* seconds */
 #define CEPH_OSD_KEEPALIVE_DEFAULT  5
 #define CEPH_OSD_IDLE_TTL_DEFAULT    60
 
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -305,7 +305,6 @@ ceph_parse_options(char *options, const
 
 	/* start with defaults */
 	opt->flags = CEPH_OPT_DEFAULT;
-	opt->osd_timeout = CEPH_OSD_TIMEOUT_DEFAULT;
 	opt->osd_keepalive_timeout = CEPH_OSD_KEEPALIVE_DEFAULT;
 	opt->mount_timeout = CEPH_MOUNT_TIMEOUT_DEFAULT; /* seconds */
 	opt->osd_idle_ttl = CEPH_OSD_IDLE_TTL_DEFAULT;   /* seconds */
@@ -391,7 +390,7 @@ ceph_parse_options(char *options, const
 
 			/* misc */
 		case Opt_osdtimeout:
-			opt->osd_timeout = intval;
+			pr_warning("ignoring deprecated osdtimeout option\n");
 			break;
 		case Opt_osdkeepalivetimeout:
 			opt->osd_keepalive_timeout = intval;
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -608,14 +608,6 @@ static void __kick_osd_requests(struct c
 	}
 }
 
-static void kick_osd_requests(struct ceph_osd_client *osdc,
-			      struct ceph_osd *kickosd)
-{
-	mutex_lock(&osdc->request_mutex);
-	__kick_osd_requests(osdc, kickosd);
-	mutex_unlock(&osdc->request_mutex);
-}
-
 /*
  * If the osd connection drops, we need to resubmit all requests.
  */
@@ -629,7 +621,9 @@ static void osd_reset(struct ceph_connec
 	dout("osd_reset osd%d\n", osd->o_osd);
 	osdc = osd->o_osdc;
 	down_read(&osdc->map_sem);
-	kick_osd_requests(osdc, osd);
+	mutex_lock(&osdc->request_mutex);
+	__kick_osd_requests(osdc, osd);
+	mutex_unlock(&osdc->request_mutex);
 	send_queued(osdc);
 	up_read(&osdc->map_sem);
 }
@@ -1093,12 +1087,10 @@ static void handle_timeout(struct work_s
 {
 	struct ceph_osd_client *osdc =
 		container_of(work, struct ceph_osd_client, timeout_work.work);
-	struct ceph_osd_request *req, *last_req = NULL;
+	struct ceph_osd_request *req;
 	struct ceph_osd *osd;
-	unsigned long timeout = osdc->client->options->osd_timeout * HZ;
 	unsigned long keepalive =
 		osdc->client->options->osd_keepalive_timeout * HZ;
-	unsigned long last_stamp = 0;
 	struct list_head slow_osds;
 	dout("timeout\n");
 	down_read(&osdc->map_sem);
@@ -1108,37 +1100,6 @@ static void handle_timeout(struct work_s
 	mutex_lock(&osdc->request_mutex);
 
 	/*
-	 * reset osds that appear to be _really_ unresponsive.  this
-	 * is a failsafe measure.. we really shouldn't be getting to
-	 * this point if the system is working properly.  the monitors
-	 * should mark the osd as failed and we should find out about
-	 * it from an updated osd map.
-	 */
-	while (timeout && !list_empty(&osdc->req_lru)) {
-		req = list_entry(osdc->req_lru.next, struct ceph_osd_request,
-				 r_req_lru_item);
-
-		/* hasn't been long enough since we sent it? */
-		if (time_before(jiffies, req->r_stamp + timeout))
-			break;
-
-		/* hasn't been long enough since it was acked? */
-		if (req->r_request->ack_stamp == 0 ||
-		    time_before(jiffies, req->r_request->ack_stamp + timeout))
-			break;
-
-		BUG_ON(req == last_req && req->r_stamp == last_stamp);
-		last_req = req;
-		last_stamp = req->r_stamp;
-
-		osd = req->r_osd;
-		BUG_ON(!osd);
-		pr_warning(" tid %llu timed out on osd%d, will reset osd\n",
-			   req->r_tid, osd->o_osd);
-		__kick_osd_requests(osdc, osd);
-	}
-
-	/*
 	 * ping osds that are a bit slow.  this ensures that if there
 	 * is a break in the TCP connection we will notice, and reopen
 	 * a connection with that osd (from the fault callback).

[ 204/221] ceph: dont reference req after put

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Alex Elder <elder@inktank.com>

(cherry picked from commit 7d5f24812bd182a2471cb69c1c2baf0648332e1f)

In __unregister_request(), there is a call to list_del_init()
referencing a request that was the subject of a call to
ceph_osdc_put_request() on the previous line.  This is not
safe, because the request structure could have been freed
by the time we reach the list_del_init().

Fix this by reversing the order of these lines.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/osd_client.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -873,9 +873,9 @@ static void __unregister_request(struct
 			req->r_osd = NULL;
 	}
 
+	list_del_init(&req->r_req_lru_item);
 	ceph_osdc_put_request(req);
 
-	list_del_init(&req->r_req_lru_item);
 	if (osdc->num_requests == 0) {
 		dout(" no requests, canceling timeout\n");
 		__cancel_osd_timeout(osdc);

[ 205/221] rbd: fix bug in rbd_dev_id_put()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Alex Elder <elder@inktank.com>

(cherry picked from commit b213e0b1a62637b2a9395a34349b13d73ca2b90a)

In rbd_dev_id_put(), there's a loop that's intended to determine
the maximum device id in use.  But it isn't doing that at all,
the effect of how it's written is to simply use the just-put id
number, which ignores whole purpose of this function.

Fix the bug.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/rbd.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -2621,8 +2621,8 @@ static void rbd_dev_id_put(struct rbd_de
 		struct rbd_device *rbd_dev;
 
 		rbd_dev = list_entry(tmp, struct rbd_device, node);
-		if (rbd_id > max_id)
-			max_id = rbd_id;
+		if (rbd_dev->dev_id > max_id)
+			max_id = rbd_dev->dev_id;
 	}
 	spin_unlock(&rbd_dev_list_lock);
 

[ 206/221] rbd: zero return code in rbd_dev_image_id()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Alex Elder <elder@inktank.com>

(cherry picked from commit a0ea3a40fd20b8c66381f747c454f89d6d1f50d4)

When rbd_dev_probe() calls rbd_dev_image_id() it expects to get
a 0 return code if successful, but it is getting a positive value.

The reason is that rbd_dev_image_id() returns the value it gets from
rbd_req_sync_exec(), which returns the number of bytes read in as a
result of the request.  (This ultimately comes from
ceph_copy_from_page_vector() in rbd_req_sync_op()).

Force the return value to 0 when successful in rbd_dev_image_id().
Do the same in rbd_dev_v2_object_prefix().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/rbd.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -2189,6 +2189,7 @@ static int rbd_dev_v2_object_prefix(stru
 	dout("%s: rbd_req_sync_exec returned %d\n", __func__, ret);
 	if (ret < 0)
 		goto out;
+	ret = 0;    /* rbd_req_sync_exec() can return positive */
 
 	p = reply_buf;
 	rbd_dev->header.object_prefix = ceph_extract_encoded_string(&p,
@@ -2841,6 +2842,7 @@ static int rbd_dev_image_id(struct rbd_d
 	dout("%s: rbd_req_sync_exec returned %d\n", __func__, ret);
 	if (ret < 0)
 		goto out;
+	ret = 0;    /* rbd_req_sync_exec() can return positive */
 
 	p = response;
 	rbd_dev->image_id = ceph_extract_encoded_string(&p,

[ 207/221] rbd: fix read-only option name

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Alex Elder <elder@inktank.com>

(cherry picked from commit be466c1cc36621590ef17b05a6d342dfd33f7280)

The name of the "read-only" mapping option was inadvertently changed
in this commit:

    f84344f3 rbd: separate mapping info in rbd_dev

Revert that hunk to return it to what it should be.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/rbd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -388,7 +388,7 @@ enum {
 static match_table_t rbd_opts_tokens = {
 	/* int args above */
 	/* string args above */
-	{Opt_read_only, "mapping.read_only"},
+	{Opt_read_only, "read_only"},
 	{Opt_read_only, "ro"},		/* Alternate spelling */
 	{Opt_read_write, "read_write"},
 	{Opt_read_write, "rw"},		/* Alternate spelling */

[ 208/221] rbd: increase maximum snapshot name length

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Alex Elder <elder@inktank.com>

(cherry picked from commit d4b125e9eb43babd14538ba61718e3db71a98d29)

Change RBD_MAX_SNAP_NAME_LEN to be based on NAME_MAX.  That is a
practical limit for the length of a snapshot name (based on the
presence of a directory using the name under /sys/bus/rbd to
represent the snapshot).

The /sys entry is created by prefixing it with "snap_"; define that
prefix symbolically, and take its length into account in defining
the snapshot name length limit.

Enforce the limit in rbd_add_parse_args().  Also delete a dout()
call in that function that was not meant to be committed.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/rbd.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -61,7 +61,10 @@
 
 #define RBD_MINORS_PER_MAJOR	256		/* max minors per blkdev */
 
-#define RBD_MAX_SNAP_NAME_LEN	32
+#define RBD_SNAP_DEV_NAME_PREFIX	"snap_"
+#define RBD_MAX_SNAP_NAME_LEN	\
+			(NAME_MAX - (sizeof (RBD_SNAP_DEV_NAME_PREFIX) - 1))
+
 #define RBD_MAX_SNAP_COUNT	510	/* allows max snapc to fit in 4KB */
 #define RBD_MAX_OPT_LEN		1024
 
@@ -2073,7 +2076,7 @@ static int rbd_register_snap_dev(struct
 	dev->type = &rbd_snap_device_type;
 	dev->parent = parent;
 	dev->release = rbd_snap_dev_release;
-	dev_set_name(dev, "snap_%s", snap->name);
+	dev_set_name(dev, "%s%s", RBD_SNAP_DEV_NAME_PREFIX, snap->name);
 	dout("%s: registering device for snapshot %s\n", __func__, snap->name);
 
 	ret = device_register(dev);
@@ -2766,8 +2769,13 @@ static char *rbd_add_parse_args(struct r
 	if (!rbd_dev->image_name)
 		goto out_err;
 
-	/* Snapshot name is optional */
+	/* Snapshot name is optional; default is to use "head" */
+
 	len = next_token(&buf);
+	if (len > RBD_MAX_SNAP_NAME_LEN) {
+		err_ptr = ERR_PTR(-ENAMETOOLONG);
+		goto out_err;
+	}
 	if (!len) {
 		buf = RBD_SNAP_HEAD_NAME; /* No snapshot supplied */
 		len = sizeof (RBD_SNAP_HEAD_NAME) - 1;
@@ -2778,8 +2786,6 @@ static char *rbd_add_parse_args(struct r
 	memcpy(snap_name, buf, len);
 	*(snap_name + len) = '\0';
 
-dout("    SNAP_NAME is <%s>, len is %zd\n", snap_name, len);
-
 	return snap_name;
 
 out_err:

[ 209/221] rbd: remove snapshots on error in rbd_add()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Alex Elder <elder@inktank.com>

(cherry picked from commit 41f38c2b2f8b66b176a0e548ef06294343a7bfa2)

If rbd_dev_snaps_update() has ever been called for an rbd device
structure there could be snapshot structures on its snaps list.
In rbd_add(), this function is called but a subsequent error
path neglected to clean up any of these snapshots.

Add a call to rbd_remove_all_snaps() in the appropriate spot to
remedy this.  Change a couple of error labels to be a little
clearer while there.

Drop the leading underscores from the function name; there's nothing
special about that function that they might signify.  As suggested
in review, the leading underscores in __rbd_remove_snap_dev() have
been removed as well.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/rbd.c |   20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -221,7 +221,7 @@ static int rbd_dev_snaps_update(struct r
 static int rbd_dev_snaps_register(struct rbd_device *rbd_dev);
 
 static void rbd_dev_release(struct device *dev);
-static void __rbd_remove_snap_dev(struct rbd_snap *snap);
+static void rbd_remove_snap_dev(struct rbd_snap *snap);
 
 static ssize_t rbd_add(struct bus_type *bus, const char *buf,
 		       size_t count);
@@ -1710,13 +1710,13 @@ static int rbd_read_header(struct rbd_de
 	return ret;
 }
 
-static void __rbd_remove_all_snaps(struct rbd_device *rbd_dev)
+static void rbd_remove_all_snaps(struct rbd_device *rbd_dev)
 {
 	struct rbd_snap *snap;
 	struct rbd_snap *next;
 
 	list_for_each_entry_safe(snap, next, &rbd_dev->snaps, node)
-		__rbd_remove_snap_dev(snap);
+		rbd_remove_snap_dev(snap);
 }
 
 /*
@@ -2060,7 +2060,7 @@ static bool rbd_snap_registered(struct r
 	return ret;
 }
 
-static void __rbd_remove_snap_dev(struct rbd_snap *snap)
+static void rbd_remove_snap_dev(struct rbd_snap *snap)
 {
 	list_del(&snap->node);
 	if (device_is_registered(&snap->dev))
@@ -2442,7 +2442,7 @@ static int rbd_dev_snaps_update(struct r
 
 			if (rbd_dev->mapping.snap_id == snap->id)
 				rbd_dev->mapping.snap_exists = false;
-			__rbd_remove_snap_dev(snap);
+			rbd_remove_snap_dev(snap);
 			dout("%ssnap id %llu has been removed\n",
 				rbd_dev->mapping.snap_id == snap->id ?
 								"mapped " : "",
@@ -3053,11 +3053,11 @@ static ssize_t rbd_add(struct bus_type *
 	/* no need to lock here, as rbd_dev is not registered yet */
 	rc = rbd_dev_snaps_update(rbd_dev);
 	if (rc)
-		goto err_out_header;
+		goto err_out_probe;
 
 	rc = rbd_dev_set_mapping(rbd_dev, snap_name);
 	if (rc)
-		goto err_out_header;
+		goto err_out_snaps;
 
 	/* generate unique id: find highest unique id, add one */
 	rbd_dev_id_get(rbd_dev);
@@ -3121,7 +3121,9 @@ err_out_blkdev:
 	unregister_blkdev(rbd_dev->major, rbd_dev->name);
 err_out_id:
 	rbd_dev_id_put(rbd_dev);
-err_out_header:
+err_out_snaps:
+	rbd_remove_all_snaps(rbd_dev);
+err_out_probe:
 	rbd_header_free(&rbd_dev->header);
 err_out_client:
 	kfree(rbd_dev->header_name);
@@ -3219,7 +3221,7 @@ static ssize_t rbd_remove(struct bus_typ
 		goto done;
 	}
 
-	__rbd_remove_all_snaps(rbd_dev);
+	rbd_remove_all_snaps(rbd_dev);
 	rbd_bus_del_dev(rbd_dev);
 
 done:

[ 210/221] rbd: do not allow remove of mounted-on image

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Alex Elder <elder@inktank.com>

(cherry picked from commit 42382b709bd1d143b9f0fa93e0a3a1f2f4210707)

There is no check in rbd_remove() to see if anybody holds open the
image being removed.  That's not cool.

Add a simple open count that goes up and down with opens and closes
(releases) of the device, and don't allow an rbd image to be removed
if the count is non-zero.

Protect the updates of the open count value with ctl_mutex to ensure
the underlying rbd device doesn't get removed while concurrently
being opened.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/rbd.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -207,6 +207,7 @@ struct rbd_device {
 
 	/* sysfs related */
 	struct device		dev;
+	unsigned long		open_count;
 };
 
 static DEFINE_MUTEX(ctl_mutex);	  /* Serialize open/close/setup/teardown */
@@ -280,8 +281,11 @@ static int rbd_open(struct block_device
 	if ((mode & FMODE_WRITE) && rbd_dev->mapping.read_only)
 		return -EROFS;
 
+	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
 	rbd_get_dev(rbd_dev);
 	set_device_ro(bdev, rbd_dev->mapping.read_only);
+	rbd_dev->open_count++;
+	mutex_unlock(&ctl_mutex);
 
 	return 0;
 }
@@ -290,7 +294,11 @@ static int rbd_release(struct gendisk *d
 {
 	struct rbd_device *rbd_dev = disk->private_data;
 
+	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+	rbd_assert(rbd_dev->open_count > 0);
+	rbd_dev->open_count--;
 	rbd_put_dev(rbd_dev);
+	mutex_unlock(&ctl_mutex);
 
 	return 0;
 }
@@ -3221,6 +3229,11 @@ static ssize_t rbd_remove(struct bus_typ
 		goto done;
 	}
 
+	if (rbd_dev->open_count) {
+		ret = -EBUSY;
+		goto done;
+	}
+
 	rbd_remove_all_snaps(rbd_dev);
 	rbd_bus_del_dev(rbd_dev);
 

[ 211/221] rbd: get rid of RBD_MAX_SEG_NAME_LEN

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Alex Elder <elder@inktank.com>

(cherry picked from commit 2fd82b9e92c2a718ae81fc987b4468ceeee6979b)

RBD_MAX_SEG_NAME_LEN represents the maximum length of an rbd object
name (i.e., one of the objects providing storage backing an rbd
image).

Another symbol, MAX_OBJ_NAME_SIZE, is used in the osd client code to
define the maximum length of any object name in an osd request.

Right now they disagree, with RBD_MAX_SEG_NAME_LEN being too big.

There's no real benefit at this point to defining the rbd object
name length limit separate from any other object name, so just
get rid of RBD_MAX_SEG_NAME_LEN and use MAX_OBJ_NAME_SIZE in its
place.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/rbd.c       |    6 +++---
 drivers/block/rbd_types.h |    2 --
 2 files changed, 3 insertions(+), 5 deletions(-)

--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -706,13 +706,13 @@ static char *rbd_segment_name(struct rbd
 	u64 segment;
 	int ret;
 
-	name = kmalloc(RBD_MAX_SEG_NAME_LEN + 1, GFP_NOIO);
+	name = kmalloc(MAX_OBJ_NAME_SIZE + 1, GFP_NOIO);
 	if (!name)
 		return NULL;
 	segment = offset >> rbd_dev->header.obj_order;
-	ret = snprintf(name, RBD_MAX_SEG_NAME_LEN, "%s.%012llx",
+	ret = snprintf(name, MAX_OBJ_NAME_SIZE + 1, "%s.%012llx",
 			rbd_dev->header.object_prefix, segment);
-	if (ret < 0 || ret >= RBD_MAX_SEG_NAME_LEN) {
+	if (ret < 0 || ret > MAX_OBJ_NAME_SIZE) {
 		pr_err("error formatting segment name for #%llu (%d)\n",
 			segment, ret);
 		kfree(name);
--- a/drivers/block/rbd_types.h
+++ b/drivers/block/rbd_types.h
@@ -46,8 +46,6 @@
 #define RBD_MIN_OBJ_ORDER       16
 #define RBD_MAX_OBJ_ORDER       30
 
-#define RBD_MAX_SEG_NAME_LEN	128
-
 #define RBD_COMP_NONE		0
 #define RBD_CRYPT_NONE		0
 

[ 212/221] rbd: remove linger unconditionally

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Alex Elder <elder@inktank.com>

(cherry picked from commit 61c74035626beb25a39b0273ccf7d75510bc36a1)

In __unregister_linger_request(), the request is being removed
from the osd client's req_linger list only when the request
has a non-null osd pointer.  It should be done whether or not
the request currently has an osd.

This is most likely a non-issue because I believe the request
will always have an osd when this function is called.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ceph/osd_client.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -907,8 +907,8 @@ static void __unregister_linger_request(
 					struct ceph_osd_request *req)
 {
 	dout("__unregister_linger_request %p\n", req);
+	list_del_init(&req->r_linger_item);
 	if (req->r_osd) {
-		list_del_init(&req->r_linger_item);
 		list_del_init(&req->r_linger_osd);
 
 		if (list_empty(&req->r_osd->o_requests) &&

[ 213/221] ceph: Dont update i_max_size when handling non-auth cap

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: "Yan, Zheng" <zheng.z.yan@intel.com>

(cherry picked from commit 5e62ad30157d0da04cf40c6d1a2f4bc840948b9c)

The cap from non-auth mds doesn't have a meaningful max_size value.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ceph/caps.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -2388,7 +2388,7 @@ static void handle_cap_grant(struct inod
 			    &atime);
 
 	/* max size increase? */
-	if (max_size != ci->i_max_size) {
+	if (ci->i_auth_cap == cap && max_size != ci->i_max_size) {
 		dout("max_size %lld -> %llu\n", ci->i_max_size, max_size);
 		ci->i_max_size = max_size;
 		if (max_size >= ci->i_wanted_max_size) {

[ 214/221] ceph: Fix infinite loop in __wake_requests

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: "Yan, Zheng" <zheng.z.yan@intel.com>

(cherry picked from commit ed75ec2cd19b47efcd292b6e23f58e56f4c5bc34)

__wake_requests() will enter infinite loop if we use it to wake
requests in the session->s_waiting list. __wake_requests() deletes
requests from the list and __do_request() adds requests back to
the list.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ceph/mds_client.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -1876,9 +1876,14 @@ finish:
 static void __wake_requests(struct ceph_mds_client *mdsc,
 			    struct list_head *head)
 {
-	struct ceph_mds_request *req, *nreq;
+	struct ceph_mds_request *req;
+	LIST_HEAD(tmp_list);
 
-	list_for_each_entry_safe(req, nreq, head, r_wait) {
+	list_splice_init(head, &tmp_list);
+
+	while (!list_empty(&tmp_list)) {
+		req = list_entry(tmp_list.next,
+				 struct ceph_mds_request, r_wait);
 		list_del_init(&req->r_wait);
 		__do_request(mdsc, req);
 	}

[ 215/221] ceph: Dont add dirty inode to dirty list if caps is in migration

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: "Yan, Zheng" <zheng.z.yan@intel.com>

(cherry picked from commit 0685235ffd9dbdb9ccbda587f8a3c83ad1d5a921)

Add dirty inode to cap_dirty_migrating list instead, this can avoid
ceph_flush_dirty_caps() entering infinite loop.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ceph/caps.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -1349,11 +1349,15 @@ int __ceph_mark_dirty_caps(struct ceph_i
 		if (!ci->i_head_snapc)
 			ci->i_head_snapc = ceph_get_snap_context(
 				ci->i_snap_realm->cached_context);
-		dout(" inode %p now dirty snapc %p\n", &ci->vfs_inode,
-			ci->i_head_snapc);
+		dout(" inode %p now dirty snapc %p auth cap %p\n",
+		     &ci->vfs_inode, ci->i_head_snapc, ci->i_auth_cap);
 		BUG_ON(!list_empty(&ci->i_dirty_item));
 		spin_lock(&mdsc->cap_dirty_lock);
-		list_add(&ci->i_dirty_item, &mdsc->cap_dirty);
+		if (ci->i_auth_cap)
+			list_add(&ci->i_dirty_item, &mdsc->cap_dirty);
+		else
+			list_add(&ci->i_dirty_item,
+				 &mdsc->cap_dirty_migrating);
 		spin_unlock(&mdsc->cap_dirty_lock);
 		if (ci->i_flushing_caps == 0) {
 			ihold(inode);

[ 216/221] ceph: Fix __ceph_do_pending_vmtruncate

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: "Yan, Zheng" <zheng.z.yan@intel.com>

(cherry picked from commit a85f50b6ef93fbbb2ae932ce9b2376509d172796)

we should set i_truncate_pending to 0 after page cache is truncated
to i_truncate_size

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ceph/inode.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1466,7 +1466,7 @@ void __ceph_do_pending_vmtruncate(struct
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	u64 to;
-	int wrbuffer_refs, wake = 0;
+	int wrbuffer_refs, finish = 0;
 
 retry:
 	spin_lock(&ci->i_ceph_lock);
@@ -1498,15 +1498,18 @@ retry:
 	truncate_inode_pages(inode->i_mapping, to);
 
 	spin_lock(&ci->i_ceph_lock);
-	ci->i_truncate_pending--;
-	if (ci->i_truncate_pending == 0)
-		wake = 1;
+	if (to == ci->i_truncate_size) {
+		ci->i_truncate_pending = 0;
+		finish = 1;
+	}
 	spin_unlock(&ci->i_ceph_lock);
+	if (!finish)
+		goto retry;
 
 	if (wrbuffer_refs == 0)
 		ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
-	if (wake)
-		wake_up_all(&ci->i_cap_wq);
+
+	wake_up_all(&ci->i_cap_wq);
 }
 
 

[ 217/221] ceph: call handle_cap_grant() for cap import message

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: "Yan, Zheng" <zheng.z.yan@intel.com>

(cherry picked from commit 0e5e1774a92e6fe9c511585de8f078b4c4c68dbb)

If client sends cap message that requests new max size during
exporting caps, the exporting MDS will drop the message quietly.
So the client may wait for the reply that updates the max size
forever. call handle_cap_grant() for cap import message can
avoid this issue.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ceph/caps.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -2749,6 +2749,7 @@ static void handle_cap_import(struct cep
 
 	/* make sure we re-request max_size, if necessary */
 	spin_lock(&ci->i_ceph_lock);
+	ci->i_wanted_max_size = 0;  /* reset */
 	ci->i_requested_max_size = 0;
 	spin_unlock(&ci->i_ceph_lock);
 }
@@ -2844,8 +2845,6 @@ void ceph_handle_caps(struct ceph_mds_se
 	case CEPH_CAP_OP_IMPORT:
 		handle_cap_import(mdsc, inode, h, session,
 				  snaptrace, snaptrace_len);
-		ceph_check_caps(ceph_inode(inode), 0, session);
-		goto done_unlocked;
 	}
 
 	/* the rest require a cap */
@@ -2862,6 +2861,7 @@ void ceph_handle_caps(struct ceph_mds_se
 	switch (op) {
 	case CEPH_CAP_OP_REVOKE:
 	case CEPH_CAP_OP_GRANT:
+	case CEPH_CAP_OP_IMPORT:
 		handle_cap_grant(inode, h, session, cap, msg->middle);
 		goto done_unlocked;
 

[ 218/221] libceph: Unlock unprocessed pages in start_read() error path

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------


From: David Zafman <david.zafman@inktank.com>

(cherry picked from commit 8884d53dd63b1d9315b343564fcbe1ede004a99e)

Function start_read() can get an error before processing all pages.
It must not only release the remaining pages, but unlock them too.

This fixes http://tracker.newdream.net/issues/3370

Signed-off-by: David Zafman <david.zafman@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ceph/addr.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -267,6 +267,14 @@ static void finish_read(struct ceph_osd_
 	kfree(req->r_pages);
 }
 
+static void ceph_unlock_page_vector(struct page **pages, int num_pages)
+{
+	int i;
+
+	for (i = 0; i < num_pages; i++)
+		unlock_page(pages[i]);
+}
+
 /*
  * start an async read(ahead) operation.  return nr_pages we submitted
  * a read for on success, or negative error code.
@@ -347,6 +355,7 @@ static int start_read(struct inode *inod
 	return nr_pages;
 
 out_pages:
+	ceph_unlock_page_vector(pages, nr_pages);
 	ceph_release_page_vector(pages, nr_pages);
 out:
 	ceph_osdc_put_request(req);

[ 219/221] drm/i915: force restore on lid open

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit 45e2b5f640b3766da3eda48f6c35f088155c06f3 upstream.

There seem to be indeed some awkwards machines around, mostly those
without OpRegion support, where the firmware changes the display hw
state behind our backs when closing the lid.

This force-restore logic has been originally introduced in

commit c1c7af60892070e4b82ad63bbfb95ae745056de0
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Sep 10 15:28:03 2009 -0700

    drm/i915: force mode set at lid open time

but after the modeset-rework we've disabled it in the vain hope that
it's no longer required:

commit 3b7a89fce3e3dc96b549d6d829387b4439044d0d
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Sep 17 22:27:21 2012 +0200

    drm/i915: fix OOPS in lid_notify

Alas, no.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54677
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57434
Tested-by: Krzysztof Mazur <krzysiek@podlesie.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_drv.c      |    2 +-
 drivers/gpu/drm/i915/i915_drv.h      |    3 ++-
 drivers/gpu/drm/i915/intel_display.c |   15 ++++++++++++---
 drivers/gpu/drm/i915/intel_lvds.c    |    2 +-
 4 files changed, 16 insertions(+), 6 deletions(-)

--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -552,7 +552,7 @@ static int i915_drm_thaw(struct drm_devi
 		mutex_unlock(&dev->struct_mutex);
 
 		intel_modeset_init_hw(dev);
-		intel_modeset_setup_hw_state(dev);
+		intel_modeset_setup_hw_state(dev, false);
 		drm_mode_config_reset(dev);
 		drm_irq_install(dev);
 	}
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1595,7 +1595,8 @@ extern void intel_modeset_init(struct dr
 extern void intel_modeset_gem_init(struct drm_device *dev);
 extern void intel_modeset_cleanup(struct drm_device *dev);
 extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state);
-extern void intel_modeset_setup_hw_state(struct drm_device *dev);
+extern void intel_modeset_setup_hw_state(struct drm_device *dev,
+					 bool force_restore);
 extern bool intel_fbc_enabled(struct drm_device *dev);
 extern void intel_disable_fbc(struct drm_device *dev);
 extern bool ironlake_set_drps(struct drm_device *dev, u8 val);
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8250,7 +8250,8 @@ static void intel_sanitize_encoder(struc
 
 /* Scan out the current hw modeset state, sanitizes it and maps it into the drm
  * and i915 state tracking structures. */
-void intel_modeset_setup_hw_state(struct drm_device *dev)
+void intel_modeset_setup_hw_state(struct drm_device *dev,
+				  bool force_restore)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum pipe pipe;
@@ -8321,7 +8322,15 @@ void intel_modeset_setup_hw_state(struct
 		intel_sanitize_crtc(crtc);
 	}
 
-	intel_modeset_update_staged_output_state(dev);
+	if (force_restore) {
+		for_each_pipe(pipe) {
+			crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
+			intel_set_mode(&crtc->base, &crtc->base.mode,
+				       crtc->base.x, crtc->base.y, crtc->base.fb);
+		}
+	} else {
+		intel_modeset_update_staged_output_state(dev);
+	}
 
 	intel_modeset_check_state(dev);
 }
@@ -8332,7 +8341,7 @@ void intel_modeset_gem_init(struct drm_d
 
 	intel_setup_overlay(dev);
 
-	intel_modeset_setup_hw_state(dev);
+	intel_modeset_setup_hw_state(dev, false);
 }
 
 void intel_modeset_cleanup(struct drm_device *dev)
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -526,7 +526,7 @@ static int intel_lid_notify(struct notif
 	dev_priv->modeset_on_lid = 0;
 
 	mutex_lock(&dev->mode_config.mutex);
-	intel_modeset_check_state(dev);
+	intel_modeset_setup_hw_state(dev, true);
 	mutex_unlock(&dev->mode_config.mutex);
 
 	return NOTIFY_OK;

[ 220/221] i915: ensure that VGA plane is disabled

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Mazur <krzysiek@podlesie.net>

commit 0fde901f1ddd2ce0e380a6444f1fb7ca555859e9 upstream.

Some broken systems (like HP nc6120) in some cases, usually after LID
close/open, enable VGA plane, making display unusable (black screen on LVDS,
some strange mode on VGA output). We used to disable VGA plane only once at
startup. Now we also check, if VGA plane is still disabled while changing
mode, and fix that if something changed it.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57434
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_display.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8248,6 +8248,23 @@ static void intel_sanitize_encoder(struc
 	 * the crtc fixup. */
 }
 
+static void i915_redisable_vga(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 vga_reg;
+
+	if (HAS_PCH_SPLIT(dev))
+		vga_reg = CPU_VGACNTRL;
+	else
+		vga_reg = VGACNTRL;
+
+	if (I915_READ(vga_reg) != VGA_DISP_DISABLE) {
+		DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n");
+		I915_WRITE(vga_reg, VGA_DISP_DISABLE);
+		POSTING_READ(vga_reg);
+	}
+}
+
 /* Scan out the current hw modeset state, sanitizes it and maps it into the drm
  * and i915 state tracking structures. */
 void intel_modeset_setup_hw_state(struct drm_device *dev,
@@ -8328,6 +8345,8 @@ void intel_modeset_setup_hw_state(struct
 			intel_set_mode(&crtc->base, &crtc->base.mode,
 				       crtc->base.x, crtc->base.y, crtc->base.fb);
 		}
+
+		i915_redisable_vga(dev);
 	} else {
 		intel_modeset_update_staged_output_state(dev);
 	}

[ 221/221] drm/i915: Treat crtc->mode.clock == 0 as disabled

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit 3490ea5de6ac4af309c3df8a26a5cca61306334c upstream.

Prevent a divide-by-zero by consistently treating an 'active' CRTC
without a mode set as actually disabled.

This looks to have been first introduced with

commit 24929352481f085c5f85d4d4cbc919ddf106d381
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Jul 2 20:28:59 2012 +0200

    drm/i915: read out the modeset hw state at load and resume time

but then combined with

commit b0a2658acb5bf9ca86b4aab011b7106de3af0add
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Dec 18 09:37:54 2012 +0100

    drm/i915: don't disable disconnected outputs

it finally started oopsing.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_pm.c |   23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -44,6 +44,14 @@
  * i915.i915_enable_fbc parameter
  */
 
+static bool intel_crtc_active(struct drm_crtc *crtc)
+{
+	/* Be paranoid as we can arrive here with only partial
+	 * state retrieved from the hardware during setup.
+	 */
+	return to_intel_crtc(crtc)->active && crtc->fb && crtc->mode.clock;
+}
+
 static void i8xx_disable_fbc(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -405,9 +413,8 @@ void intel_update_fbc(struct drm_device
 	 *   - going to an unsupported config (interlace, pixel multiply, etc.)
 	 */
 	list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) {
-		if (tmp_crtc->enabled &&
-		    !to_intel_crtc(tmp_crtc)->primary_disabled &&
-		    tmp_crtc->fb) {
+		if (intel_crtc_active(tmp_crtc) &&
+		    !to_intel_crtc(tmp_crtc)->primary_disabled) {
 			if (crtc) {
 				DRM_DEBUG_KMS("more than one pipe active, disabling compression\n");
 				dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES;
@@ -992,7 +999,7 @@ static struct drm_crtc *single_enabled_c
 	struct drm_crtc *crtc, *enabled = NULL;
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		if (crtc->enabled && crtc->fb) {
+		if (intel_crtc_active(crtc)) {
 			if (enabled)
 				return NULL;
 			enabled = crtc;
@@ -1086,7 +1093,7 @@ static bool g4x_compute_wm0(struct drm_d
 	int entries, tlb_miss;
 
 	crtc = intel_get_crtc_for_plane(dev, plane);
-	if (crtc->fb == NULL || !crtc->enabled) {
+	if (!intel_crtc_active(crtc)) {
 		*cursor_wm = cursor->guard_size;
 		*plane_wm = display->guard_size;
 		return false;
@@ -1215,7 +1222,7 @@ static bool vlv_compute_drain_latency(st
 	int entries;
 
 	crtc = intel_get_crtc_for_plane(dev, plane);
-	if (crtc->fb == NULL || !crtc->enabled)
+	if (!intel_crtc_active(crtc))
 		return false;
 
 	clock = crtc->mode.clock;	/* VESA DOT Clock */
@@ -1478,7 +1485,7 @@ static void i9xx_update_wm(struct drm_de
 
 	fifo_size = dev_priv->display.get_fifo_size(dev, 1);
 	crtc = intel_get_crtc_for_plane(dev, 1);
-	if (crtc->enabled && crtc->fb) {
+	if (intel_crtc_active(crtc)) {
 		planeb_wm = intel_calculate_wm(crtc->mode.clock,
 					       wm_info, fifo_size,
 					       crtc->fb->bits_per_pixel / 8,
@@ -1923,7 +1930,7 @@ sandybridge_compute_sprite_wm(struct drm
 	int entries, tlb_miss;
 
 	crtc = intel_get_crtc_for_plane(dev, plane);
-	if (crtc->fb == NULL || !crtc->enabled) {
+	if (!intel_crtc_active(crtc)) {
 		*sprite_wm = display->guard_size;
 		return false;
 	}

Re: [ 000/221] 3.7.3-stable review

[Shuah Khan]

On Tue, Jan 15, 2013 at 11:48 AM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 3.7.3 release.
> There are 221 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jan 17 18:49:23 UTC 2013.
> Anything received after that time might be too late.
>
> greg k-h

3.7.3 rc patch applied cleanly. Compiled and booted on the following systems:
HP EliteBook 6930p Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz
HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics

Cross-compile tests:

alpha: defconfig passed
arm: defconfig passed
arm64: defconfig passed
c6x: defconfig passed
mips: defconfig passed
mipsel: defconfig passed
powerpc: wii_defconfig passed
sh: defconfig passed
sparc: defconfig passed
tile: tilegx_defconfig passed

-- Shuah

Re: [ 037/221] iscsi-target: Fix bug in handling of ExpStatSN ACK during u32 wrap-around

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 1208 bytes --]

On Tue, 2013-01-15 at 10:49 -0800, Greg Kroah-Hartman wrote:
> 3.7-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Steve Hodgson <steve@purestorage.com>
> 
> commit 64c13330a38935120501b19c97a3e6095747c7a1 upstream.
> 
> This patch fixes a bug in the hanlding of initiator provided ExpStatSN and
> individual iscsi_cmd->stat_sn comparision during iscsi_conn->stat_sn
> wrap-around within iscsit_ack_from_expstatsn() code.
> 
> This bug would manifest itself as iscsi_cmd descriptors not being Acked
> by a lower ExpStatSn, causing them to be leaked until an iSCSI connection
> or session reinstatement event occurs to release all commands.
> 
> Also fix up two other uses of incorrect CmdSN SNA comparison to use wrapper
> usage from include/scsi/iscsi_proto.h.
[...]

You'll need to add this fix:

commit 64fe4f4f181cc2fe97d4176bf6ee6e3725ae33ec
Author: Roland Dreier <roland@purestorage.com>
Date:   Mon Jan 7 11:45:16 2013 -0800

    iscsi-target: Fix CmdSN comparison (use cmd->cmd_sn instead of cmd->stat_sn)

Ben.

-- 
Ben Hutchings
I'm not a reverse psychological virus.  Please don't copy me into your sig.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 037/221] iscsi-target: Fix bug in handling of ExpStatSN ACK during u32 wrap-around

[Greg Kroah-Hartman]

On Thu, Jan 17, 2013 at 01:37:24PM +0000, Ben Hutchings wrote:
> On Tue, 2013-01-15 at 10:49 -0800, Greg Kroah-Hartman wrote:
> > 3.7-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Steve Hodgson <steve@purestorage.com>
> > 
> > commit 64c13330a38935120501b19c97a3e6095747c7a1 upstream.
> > 
> > This patch fixes a bug in the hanlding of initiator provided ExpStatSN and
> > individual iscsi_cmd->stat_sn comparision during iscsi_conn->stat_sn
> > wrap-around within iscsit_ack_from_expstatsn() code.
> > 
> > This bug would manifest itself as iscsi_cmd descriptors not being Acked
> > by a lower ExpStatSn, causing them to be leaked until an iSCSI connection
> > or session reinstatement event occurs to release all commands.
> > 
> > Also fix up two other uses of incorrect CmdSN SNA comparison to use wrapper
> > usage from include/scsi/iscsi_proto.h.
> [...]
> 
> You'll need to add this fix:
> 
> commit 64fe4f4f181cc2fe97d4176bf6ee6e3725ae33ec
> Author: Roland Dreier <roland@purestorage.com>
> Date:   Mon Jan 7 11:45:16 2013 -0800
> 
>     iscsi-target: Fix CmdSN comparison (use cmd->cmd_sn instead of cmd->stat_sn)

Thanks for that, now queued up.

greg k-h