[ 00/33] 3.7.4-stable review

[ 00/33] 3.7.4-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.7.4 release.
There are 33 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Mon Jan 21 01:01:55 UTC 2013.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.7.4-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.7.4-rc1

Jiri Slaby <jslaby@suse.cz>
    pty: return EINVAL for TIOCGPTN for BSD ptys

Steffen Trumtrar <s.trumtrar@pengutronix.de>
    mxs: uart: fix setting RTS from software

Ben Hutchings <ben@decadent.org.uk>
    staging: vt6656: Fix inconsistent structure packing

Tormod Volden <debian.tormod@gmail.com>
    staging: wlan-ng: Fix clamping of returned SSID length

Stephen Hurd <shurd@broadcom.com>
    8250/16?50: Add support for Broadcom TruManage redirected serial port

Maxime Ripard <maxime.ripard@free-electrons.com>
    tty: 8250_dw: Fix inverted arguments to serial_out in IRQ handler

Wei Yongjun <yongjun_wei@trendmicro.com.cn>
    tty: serial: vt8500: fix return value check in vt8500_serial_probe()

chao bi <chao.bi@intel.com>
    serial:ifx6x60:Delete SPI timer when shut down port

Bjørn Mork <bjorn@mork.no>
    USB: option: blacklist network interface on ONDA MT8205 4G LTE

Bjørn Mork <bjorn@mork.no>
    USB: option: add TP-LINK HSUPA Modem MA180

Wolfgang Frisch <wfpub@roembden.net>
    USB: io_ti: Fix NULL dereference in chase_port()

Andrew Cooper <andrew.cooper3@citrix.com>
    xen: Fix stack corruption in xen_failsafe_callback for 32bit PVOPS guests.

Matt Wilson <msw@amazon.com>
    xen/grant-table: correctly initialize grant table version 1

Stefan Assmann <sassmann@kpanic.de>
    igb: release already assigned MSI-X interrupts if setup fails

Tom Mingarelli <thomas.mingarelli@hp.com>
    intel-iommu: Prevent devices with RMRRs from being placed into SI Domain

Nicholas Bellinger <nab@linux-iscsi.org>
    target: Add link_magic for fabric allow_link destination target_items

Ilija Hadzic <ihadzic@research.bell-labs.com>
    drm/radeon: fix a bogus kfree

Ilija Hadzic <ihadzic@research.bell-labs.com>
    drm/radeon: fix NULL pointer dereference in UMS mode

Fabio Estevam <fabio.estevam@freescale.com>
    usb: chipidea: Allow disabling streaming not only in udc mode

Eric Sandeen <sandeen@redhat.com>
    ext4: init pagevec in ext4_da_block_invalidatepages

David Henningsson <david.henningsson@canonical.com>
    ALSA: usb - fix race in creation of M-Audio Fast track pro driver

Jesse Barnes <jbarnes@virtuousgeek.org>
    x86/Sandy Bridge: reserve pages when integrated graphics is present

Heiko Carstens <heiko.carstens@de.ibm.com>
    s390/time: fix sched_clock() overflow

Roland Dreier <roland@purestorage.com>
    target: Release se_cmd when LUN lookup fails for TMR

Roland Dreier <roland@purestorage.com>
    target: Fix use-after-free in LUN RESET handling

Roland Dreier <roland@purestorage.com>
    target: Fix missing CMD_T_ACTIVE bit regression for pending WRITEs

Mark Rustad <mark.d.rustad@intel.com>
    tcm_fc: Do not report target role when target is not defined

Mark Rustad <mark.d.rustad@intel.com>
    tcm_fc: Do not indicate retry capability to initiators

Hannes Reinecke <hare@suse.de>
    target: use correct sense code for LUN communication failure

Will Deacon <will.deacon@arm.com>
    arm64: mm: only wrprotect clean ptes if they are present

Luciano Coelho <coelho@ti.com>
    firmware: make sure the fw file size is not 0

Thomas Schwinge <thomas@codesourcery.com>
    sh: Fix FDPIC binary loader

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/hdmi - Work around "alsactl restore" errors


-------------

Diffstat:

 Makefile                                     |  4 +--
 arch/arm64/include/asm/pgtable.h             | 16 +++++-----
 arch/s390/include/asm/timex.h                | 28 +++++++++++++++++
 arch/s390/kernel/time.c                      |  2 +-
 arch/s390/kvm/interrupt.c                    |  2 +-
 arch/sh/include/asm/elf.h                    |  4 +--
 arch/x86/kernel/entry_32.S                   |  1 -
 arch/x86/kernel/setup.c                      | 78 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/base/firmware_class.c                |  2 +-
 drivers/gpu/drm/radeon/r600_cs.c             |  6 ++--
 drivers/gpu/drm/radeon/radeon_cs.c           |  5 +--
 drivers/iommu/intel-iommu.c                  | 31 +++++++++++++++++++
 drivers/net/ethernet/intel/igb/igb_main.c    | 22 +++++++++----
 drivers/staging/vt6656/bssdb.h               |  1 -
 drivers/staging/vt6656/int.h                 |  1 -
 drivers/staging/vt6656/iocmd.h               | 33 ++++++++++----------
 drivers/staging/vt6656/iowpa.h               |  8 ++---
 drivers/staging/wlan-ng/prism2mgmt.c         |  2 +-
 drivers/target/target_core_device.c          |  1 +
 drivers/target/target_core_fabric_configfs.c | 12 ++++++++
 drivers/target/target_core_tpg.c             |  1 +
 drivers/target/target_core_transport.c       | 11 ++++---
 drivers/target/tcm_fc/tfc_sess.c             | 12 ++++++--
 drivers/tty/pty.c                            |  2 ++
 drivers/tty/serial/8250/8250.c               | 11 +++++++
 drivers/tty/serial/8250/8250.h               |  1 +
 drivers/tty/serial/8250/8250_dw.c            |  2 +-
 drivers/tty/serial/8250/8250_pci.c           | 38 +++++++++++++++++++++++
 drivers/tty/serial/ifx6x60.c                 |  1 +
 drivers/tty/serial/mxs-auart.c               |  4 ++-
 drivers/tty/serial/vt8500_serial.c           |  2 +-
 drivers/usb/chipidea/host.c                  |  3 ++
 drivers/usb/serial/io_ti.c                   |  3 ++
 drivers/usb/serial/option.c                  |  9 +++++-
 drivers/xen/grant-table.c                    | 48 +++++++++++++++++------------
 fs/ext4/inode.c                              |  2 ++
 include/target/target_core_base.h            |  4 +++
 include/uapi/linux/serial_core.h             |  4 ++-
 sound/pci/hda/patch_hdmi.c                   |  2 +-
 sound/usb/quirks.c                           |  8 +++--
 40 files changed, 342 insertions(+), 85 deletions(-)

[ 01/33] ALSA: hda/hdmi - Work around "alsactl restore" errors

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 6f54c361329dbb67dac9de174e938992651d12d7 upstream.

When "alsactl restore" is performed on HDMI codecs, it tries to
restore the channel map value since the channel map controls are
writable.  But hdmi_chmap_ctl_put() returns -EBADFD when no PCM stream
is assigned yet, and this results in an error message from alsactl.
Although the error is harmless, it's certainly ugly and can be
regarded as a regression.

As a workaround, this patch changes the return code in such a case to
be zero for making others happy.  (A slight excuse is: when the chmap
is changed through the proper alsa-lib API, the PCM status is checked
there anyway, so we don't have to be too strict in the kernel side.)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_hdmi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1499,7 +1499,7 @@ static int hdmi_chmap_ctl_put(struct snd
 	ctl_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
 	substream = snd_pcm_chmap_substream(info, ctl_idx);
 	if (!substream || !substream->runtime)
-		return -EBADFD;
+		return 0; /* just for avoiding error from alsactl restore */
 	switch (substream->runtime->status->state) {
 	case SNDRV_PCM_STATE_OPEN:
 	case SNDRV_PCM_STATE_SETUP:

[ 02/33] sh: Fix FDPIC binary loader

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Schwinge <thomas@codesourcery.com>

commit 4a71997a3279a339e7336ea5d0cd27282e2dea44 upstream.

Ensure that the aux table is properly initialized, even when optional features
are missing.  Without this, the FDPIC loader did not work.  This was meant to
be included in commit d5ab780305bb6d60a7b5a74f18cf84eb6ad153b1.

Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/sh/include/asm/elf.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/sh/include/asm/elf.h
+++ b/arch/sh/include/asm/elf.h
@@ -203,9 +203,9 @@ extern void __kernel_vsyscall;
 	if (vdso_enabled)					\
 		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);	\
 	else							\
-		NEW_AUX_ENT(AT_IGNORE, 0);
+		NEW_AUX_ENT(AT_IGNORE, 0)
 #else
-#define VSYSCALL_AUX_ENT
+#define VSYSCALL_AUX_ENT	NEW_AUX_ENT(AT_IGNORE, 0)
 #endif /* CONFIG_VSYSCALL */
 
 #ifdef CONFIG_SH_FPU

[ 03/33] firmware: make sure the fw file size is not 0

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luciano Coelho <coelho@ti.com>

commit 4adf07fba3bd64472921a01aae0e116f9f948b77 upstream.

If the requested firmware file size is 0 bytes in the filesytem, we
will try to vmalloc(0), which causes a warning:

  vmalloc: allocation failure: 0 bytes
  kworker/1:1: page allocation failure: order:0, mode:0xd2
    __vmalloc_node_range+0x164/0x208
    __vmalloc_node+0x4c/0x58
    vmalloc+0x38/0x44
    _request_firmware_load+0x220/0x6b0
    request_firmware+0x64/0xc8
    wl18xx_setup+0xb4/0x570 [wl18xx]
    wlcore_nvs_cb+0x64/0x9f8 [wlcore]
    request_firmware_work_func+0x94/0x100
    process_one_work+0x1d0/0x750
    worker_thread+0x184/0x4ac
    kthread+0xb4/0xc0

To fix this, check whether the file size is less than or equal to zero
in fw_read_file_contents().

Signed-off-by: Luciano Coelho <coelho@ti.com>
Acked-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/firmware_class.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -295,7 +295,7 @@ static bool fw_read_file_contents(struct
 	char *buf;
 
 	size = fw_file_size(file);
-	if (size < 0)
+	if (size <= 0)
 		return false;
 	buf = vmalloc(size);
 	if (!buf)

[ 04/33] arm64: mm: only wrprotect clean ptes if they are present

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit 02522463c84748b3b8ad770f9424bcfa70a5b4c4 upstream.

Marking non-present ptes as read-only can corrupt file ptes, breaking
things like swap and file mappings.

This patch ensures that we only manipulate user pte bits when the pte
is marked present.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/include/asm/pgtable.h |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -132,9 +132,8 @@ extern struct page *empty_zero_page;
 #define pte_write(pte)		(!(pte_val(pte) & PTE_RDONLY))
 #define pte_exec(pte)		(!(pte_val(pte) & PTE_UXN))
 
-#define pte_present_exec_user(pte) \
-	((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == \
-	 (PTE_VALID | PTE_USER))
+#define pte_present_user(pte) \
+	((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER))
 
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
@@ -157,10 +156,13 @@ extern void __sync_icache_dcache(pte_t p
 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pte)
 {
-	if (pte_present_exec_user(pte))
-		__sync_icache_dcache(pte, addr);
-	if (!pte_dirty(pte))
-		pte = pte_wrprotect(pte);
+	if (pte_present_user(pte)) {
+		if (pte_exec(pte))
+			__sync_icache_dcache(pte, addr);
+		if (!pte_dirty(pte))
+			pte = pte_wrprotect(pte);
+	}
+
 	set_pte(ptep, pte);
 }
 

[ 05/33] target: use correct sense code for LUN communication failure

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hannes Reinecke <hare@suse.de>

commit 18a9df42d53fabfa43b78be1104838cc8b9762e1 upstream.

The ASC/ASCQ code for 'Logical Unit Communication failure' is
0x08/0x00; 0x80/0x00 is vendor specific.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@risingtidesystems.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_transport.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -3024,7 +3024,7 @@ int transport_send_check_condition_and_s
 		/* ILLEGAL REQUEST */
 		buffer[SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST;
 		/* LOGICAL UNIT COMMUNICATION FAILURE */
-		buffer[SPC_ASC_KEY_OFFSET] = 0x80;
+		buffer[SPC_ASC_KEY_OFFSET] = 0x08;
 		break;
 	}
 	/*

[ 06/33] tcm_fc: Do not indicate retry capability to initiators

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Rustad <mark.d.rustad@intel.com>

commit f2eeba214bcd0215b7f558cab6420e5fd153042b upstream.

When generating a PRLI response to an initiator, clear the
FCP_SPPF_RETRY bit in the response.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Acked by Robert Love <robert.w.love@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/tcm_fc/tfc_sess.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/target/tcm_fc/tfc_sess.c
+++ b/drivers/target/tcm_fc/tfc_sess.c
@@ -396,10 +396,10 @@ static int ft_prli_locked(struct fc_rpor
 
 	/*
 	 * OR in our service parameters with other provider (initiator), if any.
-	 * TBD XXX - indicate RETRY capability?
 	 */
 fill:
 	fcp_parm = ntohl(spp->spp_params);
+	fcp_parm &= ~FCP_SPPF_RETRY;
 	spp->spp_params = htonl(fcp_parm | FCP_SPPF_TARG_FCN);
 	return FC_SPP_RESP_ACK;
 }

[ 07/33] tcm_fc: Do not report target role when target is not defined

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Rustad <mark.d.rustad@intel.com>

commit edec8dfefa1f372b2dd8197da555352e76a10c03 upstream.

Clear the target role when no target is provided for
the node performing a PRLI.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Acked by Robert Love <robert.w.love@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/tcm_fc/tfc_sess.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/target/tcm_fc/tfc_sess.c
+++ b/drivers/target/tcm_fc/tfc_sess.c
@@ -355,11 +355,11 @@ static int ft_prli_locked(struct fc_rpor
 
 	tport = ft_tport_create(rdata->local_port);
 	if (!tport)
-		return 0;	/* not a target for this local port */
+		goto not_target;	/* not a target for this local port */
 
 	acl = ft_acl_get(tport->tpg, rdata);
 	if (!acl)
-		return 0;
+		goto not_target;	/* no target for this remote */
 
 	if (!rspp)
 		goto fill;
@@ -402,6 +402,12 @@ fill:
 	fcp_parm &= ~FCP_SPPF_RETRY;
 	spp->spp_params = htonl(fcp_parm | FCP_SPPF_TARG_FCN);
 	return FC_SPP_RESP_ACK;
+
+not_target:
+	fcp_parm = ntohl(spp->spp_params);
+	fcp_parm &= ~FCP_SPPF_TARG_FCN;
+	spp->spp_params = htonl(fcp_parm);
+	return 0;
 }
 
 /**

[ 08/33] target: Fix missing CMD_T_ACTIVE bit regression for pending WRITEs

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roland Dreier <roland@purestorage.com>

commit e627c615553a356f6f70215ebb3933c6e057553e upstream.

This patch fixes a regression bug introduced during v3.6.x code with
the following commit to drop transport_add_cmd_to_queue(), which
originally re-set CMD_T_ACTIVE during pending WRITE I/O submission:

commit af8772926f019b7bddd7477b8de5f3b0f12bad21
Author: Christoph Hellwig <hch@infradead.org>
Date:   Sun Jul 8 15:58:49 2012 -0400

    target: replace the processing thread with a TMR work queue

The following sequence happens for write commands (or any other
commands with a data out phase):

 - The transport calls target_submit_cmd(), which sets CMD_T_ACTIVE in
   cmd->transport_state and sets cmd->t_state to TRANSPORT_NEW_CMD.
 - Things go on transport_generic_new_cmd(), which notices that the
   command needs to transfer data, so it sets cmd->t_state to
   TRANSPORT_WRITE_PENDING and calls transport_cmd_check_stop().
 - transport_cmd_check_stop() clears CMD_T_ACTIVE in cmd->transport_state
   and returns in the normal case.
 - Then we continue on to call ->se_tfo->write_pending().
 - The data comes back from the initiator, and the transport calls
   target_execute_cmd(), which sets cmd->t_state to TRANSPORT_PROCESSING
   and calls into the backend to actually write the data.

At this point, the backend might take a long time to complete the
command, since it has to do real IO.  If an abort request comes in for
this command at this point, it will not wait for the command to finish
since CMD_T_ACTIVE is not set.  Then when the command does finally
finish, we blow up with use-after-free.

Avoid this by setting CMD_T_ACTIVE in target_execute_cmd() so that
transport_wait_for_tasks() waits for the command to finish executing.
This matches the behavior from before commit 1389533ef944 ("target:
remove transport_generic_handle_data"), when data was signaled via
transport_generic_handle_data(), which set CMD_T_ACTIVE because it
called transport_add_cmd_to_queue().

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reported-by: Martin Svec <martin.svec@zoner.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_transport.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1853,6 +1853,7 @@ void target_execute_cmd(struct se_cmd *c
 	}
 
 	cmd->t_state = TRANSPORT_PROCESSING;
+	cmd->transport_state |= CMD_T_ACTIVE;
 	spin_unlock_irq(&cmd->t_state_lock);
 
 	if (dev->dev_task_attr_type != SAM_TASK_ATTR_EMULATED)

[ 09/33] target: Fix use-after-free in LUN RESET handling

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roland Dreier <roland@purestorage.com>

commit 72b59d6ee8adaa51f70377db0a1917ed489bead8 upstream.

If a backend IO takes a really long then an initiator might abort a
command, and then when it gives up on the abort, send a LUN reset too,
all before we process any of the original command or the abort.  (The
abort will wait for the backend IO to complete too)

When the backend IO final completes (or fails), the abort handling
will proceed and queue up a "return aborted status" operation.  Then,
while that's still pending, the LUN reset might find the original
command still on the LUN's list of commands and try to return aborted
status again, which leads to a use-after free when the first
se_tfo->queue_status call frees the command and then the second
se_tfo->queue_status call runs.

Fix this by removing a command from the LUN state_list when we first
are about to queue aborted status; we shouldn't do anything
LUN-related after we've started returning status, so this seems like
the correct thing to do.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_transport.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -545,9 +545,6 @@ static void transport_lun_remove_cmd(str
 
 void transport_cmd_finish_abort(struct se_cmd *cmd, int remove)
 {
-	if (!(cmd->se_cmd_flags & SCF_SCSI_TMR_CDB))
-		transport_lun_remove_cmd(cmd);
-
 	if (transport_cmd_check_stop_to_fabric(cmd))
 		return;
 	if (remove)
@@ -3090,6 +3087,8 @@ void transport_send_task_abort(struct se
 	}
 	cmd->scsi_status = SAM_STAT_TASK_ABORTED;
 
+	transport_lun_remove_cmd(cmd);
+
 	pr_debug("Setting SAM_STAT_TASK_ABORTED status for CDB: 0x%02x,"
 		" ITT: 0x%08x\n", cmd->t_task_cdb[0],
 		cmd->se_tfo->get_task_tag(cmd));

[ 10/33] target: Release se_cmd when LUN lookup fails for TMR

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roland Dreier <roland@purestorage.com>

commit 5a3b6fc0092c5f8dee7820064ee54d2631d48573 upstream.

When transport_lookup_tmr_lun() fails and we return a task management
response from target_complete_tmr_failure(), we need to call
transport_cmd_check_stop_to_fabric() to release the last ref to the
cmd after calling se_tfo->queue_tm_rsp(), or else we will never remove
the failed TMR from the session command list (and we'll end up waiting
forever when trying to tear down the session).

(nab: Fix minor compile breakage)

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_transport.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1613,6 +1613,8 @@ static void target_complete_tmr_failure(
 
 	se_cmd->se_tmr_req->response = TMR_LUN_DOES_NOT_EXIST;
 	se_cmd->se_tfo->queue_tm_rsp(se_cmd);
+
+	transport_cmd_check_stop_to_fabric(se_cmd);
 }
 
 /**

[ 11/33] s390/time: fix sched_clock() overflow

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <heiko.carstens@de.ibm.com>

commit ed4f20943cd4c7b55105c04daedf8d63ab6d499c upstream.

Converting a 64 Bit TOD format value to nanoseconds means that the value
must be divided by 4.096. In order to achieve that we multiply with 125
and divide by 512.
When used within sched_clock() this triggers an overflow after appr.
417 days. Resulting in a sched_clock() return value that is much smaller
than previously and therefore may cause all sort of weird things in
subsystems that rely on a monotonic sched_clock() behaviour.

To fix this implement a tod_to_ns() helper function which converts TOD
values without overflow and call this function from both places that
open coded the conversion: sched_clock() and kvm_s390_handle_wait().

Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/include/asm/timex.h |   28 ++++++++++++++++++++++++++++
 arch/s390/kernel/time.c       |    2 +-
 arch/s390/kvm/interrupt.c     |    2 +-
 3 files changed, 30 insertions(+), 2 deletions(-)

--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -128,4 +128,32 @@ static inline unsigned long long get_clo
 	return get_clock_xt() - sched_clock_base_cc;
 }
 
+/**
+ * tod_to_ns - convert a TOD format value to nanoseconds
+ * @todval: to be converted TOD format value
+ * Returns: number of nanoseconds that correspond to the TOD format value
+ *
+ * Converting a 64 Bit TOD format value to nanoseconds means that the value
+ * must be divided by 4.096. In order to achieve that we multiply with 125
+ * and divide by 512:
+ *
+ *    ns = (todval * 125) >> 9;
+ *
+ * In order to avoid an overflow with the multiplication we can rewrite this.
+ * With a split todval == 2^32 * th + tl (th upper 32 bits, tl lower 32 bits)
+ * we end up with
+ *
+ *    ns = ((2^32 * th + tl) * 125 ) >> 9;
+ * -> ns = (2^23 * th * 125) + ((tl * 125) >> 9);
+ *
+ */
+static inline unsigned long long tod_to_ns(unsigned long long todval)
+{
+	unsigned long long ns;
+
+	ns = ((todval >> 32) << 23) * 125;
+	ns += ((todval & 0xffffffff) * 125) >> 9;
+	return ns;
+}
+
 #endif
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -63,7 +63,7 @@ static DEFINE_PER_CPU(struct clock_event
  */
 unsigned long long notrace __kprobes sched_clock(void)
 {
-	return (get_clock_monotonic() * 125) >> 9;
+	return tod_to_ns(get_clock_monotonic());
 }
 
 /*
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -408,7 +408,7 @@ int kvm_s390_handle_wait(struct kvm_vcpu
 		return 0;
 	}
 
-	sltime = ((vcpu->arch.sie_block->ckc - now)*125)>>9;
+	sltime = tod_to_ns(vcpu->arch.sie_block->ckc - now);
 
 	hrtimer_start(&vcpu->arch.ckc_timer, ktime_set (0, sltime) , HRTIMER_MODE_REL);
 	VCPU_EVENT(vcpu, 5, "enabled wait via clock comparator: %llx ns", sltime);

[ 12/33] x86/Sandy Bridge: reserve pages when integrated graphics is present

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jesse Barnes <jbarnes@virtuousgeek.org>

commit a9acc5365dbda29f7be2884efb63771dc24bd815 upstream.

SNB graphics devices have a bug that prevent them from accessing certain
memory ranges, namely anything below 1M and in the pages listed in the
table.  So reserve those at boot if set detect a SNB gfx device on the
CPU to avoid GPU hangs.

Stephane Marchesin had a similar patch to the page allocator awhile
back, but rather than reserving pages up front, it leaked them at
allocation time.

[ hpa: made a number of stylistic changes, marked arrays as static
  const, and made less verbose; use "memblock=debug" for full
  verbosity. ]

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/setup.c |   78 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -614,6 +614,81 @@ static __init void reserve_ibft_region(v
 
 static unsigned reserve_low = CONFIG_X86_RESERVE_LOW << 10;
 
+static bool __init snb_gfx_workaround_needed(void)
+{
+	int i;
+	u16 vendor, devid;
+	static const u16 snb_ids[] = {
+		0x0102,
+		0x0112,
+		0x0122,
+		0x0106,
+		0x0116,
+		0x0126,
+		0x010a,
+	};
+
+	/* Assume no if something weird is going on with PCI */
+	if (!early_pci_allowed())
+		return false;
+
+	vendor = read_pci_config_16(0, 2, 0, PCI_VENDOR_ID);
+	if (vendor != 0x8086)
+		return false;
+
+	devid = read_pci_config_16(0, 2, 0, PCI_DEVICE_ID);
+	for (i = 0; i < ARRAY_SIZE(snb_ids); i++)
+		if (devid == snb_ids[i])
+			return true;
+
+	return false;
+}
+
+/*
+ * Sandy Bridge graphics has trouble with certain ranges, exclude
+ * them from allocation.
+ */
+static void __init trim_snb_memory(void)
+{
+	static const unsigned long bad_pages[] = {
+		0x20050000,
+		0x20110000,
+		0x20130000,
+		0x20138000,
+		0x40004000,
+	};
+	int i;
+
+	if (!snb_gfx_workaround_needed())
+		return;
+
+	printk(KERN_DEBUG "reserving inaccessible SNB gfx pages\n");
+
+	/*
+	 * Reserve all memory below the 1 MB mark that has not
+	 * already been reserved.
+	 */
+	memblock_reserve(0, 1<<20);
+
+	for (i = 0; i < ARRAY_SIZE(bad_pages); i++) {
+		if (memblock_reserve(bad_pages[i], PAGE_SIZE))
+			printk(KERN_WARNING "failed to reserve 0x%08lx\n",
+			       bad_pages[i]);
+	}
+}
+
+/*
+ * Here we put platform-specific memory range workarounds, i.e.
+ * memory known to be corrupt or otherwise in need to be reserved on
+ * specific platforms.
+ *
+ * If this gets used more widely it could use a real dispatch mechanism.
+ */
+static void __init trim_platform_memory_ranges(void)
+{
+	trim_snb_memory();
+}
+
 static void __init trim_bios_range(void)
 {
 	/*
@@ -634,6 +709,7 @@ static void __init trim_bios_range(void)
 	 * take them out.
 	 */
 	e820_remove_range(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_RAM, 1);
+
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 }
 
@@ -912,6 +988,8 @@ void __init setup_arch(char **cmdline_p)
 
 	setup_real_mode();
 
+	trim_platform_memory_ranges();
+
 	init_gbpages();
 
 	/* max_pfn_mapped is updated here */

[ 13/33] ALSA: usb - fix race in creation of M-Audio Fast track pro driver

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Henningsson <david.henningsson@canonical.com>

commit b98ae2729dea161edc96c9d177459b6c28bcbba5 upstream.

A patch in the 3.2 kernel caused regression with hotplugging the
M-Audio Fast track pro, or sound after suspend. I don't have the
device so I haven't done a full analysis, but it seems userspace
(both udev and pulseaudio) got confused when a card was created,
immediately destroyed, and then created again.

However, at least one person in the bug report (martin djfun)
reports that this patch resolves the issue for him. It also leaves
a message in the log:
"snd-usb-audio: probe of 1-1.1:1.1 failed with error -5" which is
a bit misleading. It is better than non-working audio, but maybe
there's a more elegant solution?

BugLink: https://bugs.launchpad.net/bugs/1095315
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/quirks.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -387,11 +387,13 @@ static int snd_usb_fasttrackpro_boot_qui
 		 * rules
 		 */
 		err = usb_driver_set_configuration(dev, 2);
-		if (err < 0) {
+		if (err < 0)
 			snd_printdd("error usb_driver_set_configuration: %d\n",
 				    err);
-			return -ENODEV;
-		}
+		/* Always return an error, so that we stop creating a device
+		   that will just be destroyed and recreated with a new
+		   configuration */
+		return -ENODEV;
 	} else
 		snd_printk(KERN_INFO "usb-audio: Fast Track Pro config OK\n");
 

[ 14/33] ext4: init pagevec in ext4_da_block_invalidatepages

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Sandeen <sandeen@redhat.com>

commit 66bea92c69477a75a5d37b9bfed5773c92a3c4b4 upstream.

ext4_da_block_invalidatepages is missing a pagevec_init(),
which means that pvec->cold contains random garbage.

This affects whether the page goes to the front or
back of the LRU when ->cold makes it to
free_hot_cold_page()

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/inode.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1503,6 +1503,8 @@ static void ext4_da_block_invalidatepage
 
 	index = mpd->first_page;
 	end   = mpd->next_page - 1;
+
+	pagevec_init(&pvec, 0);
 	while (index <= end) {
 		nr_pages = pagevec_lookup(&pvec, mapping, index, PAGEVEC_SIZE);
 		if (nr_pages == 0)

[ 15/33] usb: chipidea: Allow disabling streaming not only in udc mode

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <fabio.estevam@freescale.com>

commit 929473ea05db455ad88cdc081f2adc556b8dc48f upstream.

When running a scp transfer using a USB/Ethernet adapter the following crash
happens:

$ scp test.tar.gz fabio@192.168.1.100:/home/fabio
fabio@192.168.1.100's password:
test.tar.gz                                      0%    0     0.0KB/s   --:-- ETA
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x2cc/0x2f0()
NETDEV WATCHDOG: eth0 (asix): transmit queue 0 timed out
Modules linked in:
Backtrace:
[<80011c94>] (dump_backtrace+0x0/0x10c) from [<804d3a5c>] (dump_stack+0x18/0x1c)
 r6:000000ff r5:80412388 r4:80685dc0 r3:80696cc0
[<804d3a44>] (dump_stack+0x0/0x1c) from [<80021868>]
(warn_slowpath_common+0x54/0x6c)
[<80021814>] (warn_slowpath_common+0x0/0x6c) from [<80021924>]
(warn_slowpath_fmt+0x38/0x40)
...

Setting SDIS (Stream Disable Mode- bit 4 of USBMODE register) fixes the problem.

However, in current code CI13XXX_DISABLE_STREAMING flag is only set in udc mode,
so allow disabling streaming also in host mode.

Tested on a mx6qsabrelite board.

Suggested-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/chipidea/host.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -129,6 +129,9 @@ static int host_start(struct ci13xxx *ci
 	else
 		ci->hcd = hcd;
 
+	if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING)
+		hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
+
 	return ret;
 }
 

[ 16/33] drm/radeon: fix NULL pointer dereference in UMS mode

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilija Hadzic <ihadzic@research.bell-labs.com>

commit ff4bd0827764e10a428a9d39e6814c5478863f94 upstream.

In UMS mode parser->rdev is NULL, so dereferencing
will cause an oops.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_cs.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -266,7 +266,7 @@ int radeon_cs_parser_init(struct radeon_
 				  p->chunks[p->chunk_ib_idx].length_dw);
 			return -EINVAL;
 		}
-		if ((p->rdev->flags & RADEON_IS_AGP)) {
+		if (p->rdev && (p->rdev->flags & RADEON_IS_AGP)) {
 			p->chunks[p->chunk_ib_idx].kpage[0] = kmalloc(PAGE_SIZE, GFP_KERNEL);
 			p->chunks[p->chunk_ib_idx].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL);
 			if (p->chunks[p->chunk_ib_idx].kpage[0] == NULL ||
@@ -570,7 +570,8 @@ static int radeon_cs_update_pages(struct
 	struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
 	int i;
 	int size = PAGE_SIZE;
-	bool copy1 = (p->rdev->flags & RADEON_IS_AGP) ? false : true;
+	bool copy1 = (p->rdev && (p->rdev->flags & RADEON_IS_AGP)) ?
+		false : true;
 
 	for (i = ibc->last_copied_page + 1; i < pg_idx; i++) {
 		if (DRM_COPY_FROM_USER(p->ib.ptr + (i * (PAGE_SIZE/4)),

[ 17/33] drm/radeon: fix a bogus kfree

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilija Hadzic <ihadzic@research.bell-labs.com>

commit a6b7e1a02b77ab8fe8775d20a88c53d8ba55482e upstream.

parser->chunks[.].kpage[.] is not always kmalloc-ed
by the parser initialization, so parser_fini should
not try to kfree it if it didn't allocate it.

This patch fixes a kernel oops that can be provoked
in UMS mode.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Cc: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/r600_cs.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -2429,8 +2429,10 @@ static void r600_cs_parser_fini(struct r
 	kfree(parser->relocs);
 	for (i = 0; i < parser->nchunks; i++) {
 		kfree(parser->chunks[i].kdata);
-		kfree(parser->chunks[i].kpage[0]);
-		kfree(parser->chunks[i].kpage[1]);
+		if (parser->rdev && (parser->rdev->flags & RADEON_IS_AGP)) {
+			kfree(parser->chunks[i].kpage[0]);
+			kfree(parser->chunks[i].kpage[1]);
+		}
 	}
 	kfree(parser->chunks);
 	kfree(parser->chunks_array);

[ 18/33] target: Add link_magic for fabric allow_link destination target_items

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 0ff8754981261a80f4b77db2536dfea92c2d4539 upstream.

This patch adds [dev,lun]_link_magic value assignment + checks within generic
target_fabric_port_link() and target_fabric_mappedlun_link() code to ensure
destination config_item *target_item sent from configfs_symlink() ->
config_item_operations->allow_link() is the underlying se_device->dev_group
and se_lun->lun_group that we expect to symlink.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_device.c          |    1 +
 drivers/target/target_core_fabric_configfs.c |   12 ++++++++++++
 drivers/target/target_core_tpg.c             |    1 +
 drivers/target/target_core_transport.c       |    1 +
 include/target/target_core_base.h            |    4 ++++
 5 files changed, 19 insertions(+)

--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -1624,6 +1624,7 @@ int core_dev_setup_virtual_lun0(void)
 		ret = PTR_ERR(dev);
 		goto out;
 	}
+	dev->dev_link_magic = SE_DEV_LINK_MAGIC;
 	se_dev->se_dev_ptr = dev;
 	g_lun0_dev = dev;
 
--- a/drivers/target/target_core_fabric_configfs.c
+++ b/drivers/target/target_core_fabric_configfs.c
@@ -71,6 +71,12 @@ static int target_fabric_mappedlun_link(
 	struct se_portal_group *se_tpg;
 	struct config_item *nacl_ci, *tpg_ci, *tpg_ci_s, *wwn_ci, *wwn_ci_s;
 	int ret = 0, lun_access;
+
+	if (lun->lun_link_magic != SE_LUN_LINK_MAGIC) {
+		pr_err("Bad lun->lun_link_magic, not a valid lun_ci pointer:"
+			" %p to struct lun: %p\n", lun_ci, lun);
+		return -EFAULT;
+	}
 	/*
 	 * Ensure that the source port exists
 	 */
@@ -745,6 +751,12 @@ static int target_fabric_port_link(
 	struct target_fabric_configfs *tf;
 	int ret;
 
+	if (dev->dev_link_magic != SE_DEV_LINK_MAGIC) {
+		pr_err("Bad dev->dev_link_magic, not a valid se_dev_ci pointer:"
+			" %p to struct se_device: %p\n", se_dev_ci, dev);
+		return -EFAULT;
+	}
+
 	tpg_ci = &lun_ci->ci_parent->ci_group->cg_item;
 	se_tpg = container_of(to_config_group(tpg_ci),
 				struct se_portal_group, tpg_group);
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -672,6 +672,7 @@ int core_tpg_register(
 	for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) {
 		lun = se_tpg->tpg_lun_list[i];
 		lun->unpacked_lun = i;
+		lun->lun_link_magic = SE_LUN_LINK_MAGIC;
 		lun->lun_status = TRANSPORT_LUN_STATUS_FREE;
 		atomic_set(&lun->lun_acl_count, 0);
 		init_completion(&lun->lun_shutdown_comp);
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1071,6 +1071,7 @@ struct se_device *transport_add_device_t
 	dev->se_hba		= hba;
 	dev->se_sub_dev		= se_dev;
 	dev->transport		= transport;
+	dev->dev_link_magic	= SE_DEV_LINK_MAGIC;
 	INIT_LIST_HEAD(&dev->dev_list);
 	INIT_LIST_HEAD(&dev->dev_sep_list);
 	INIT_LIST_HEAD(&dev->dev_tmr_list);
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -734,6 +734,8 @@ struct se_subsystem_dev {
 };
 
 struct se_device {
+#define SE_DEV_LINK_MAGIC			0xfeeddeef
+	u32			dev_link_magic;
 	/* RELATIVE TARGET PORT IDENTIFER Counter */
 	u16			dev_rpti_counter;
 	/* Used for SAM Task Attribute ordering */
@@ -820,6 +822,8 @@ struct se_port_stat_grps {
 };
 
 struct se_lun {
+#define SE_LUN_LINK_MAGIC			0xffff7771
+	u32			lun_link_magic;
 	/* See transport_lun_status_table */
 	enum transport_lun_status_table lun_status;
 	u32			lun_access;

[ 19/33] intel-iommu: Prevent devices with RMRRs from being placed into SI Domain

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tom Mingarelli <thomas.mingarelli@hp.com>

commit ea2447f700cab264019b52e2b417d689e052dcfd upstream.

This patch is to prevent non-USB devices that have RMRRs associated with them from
being placed into the SI Domain during init. This fixes the issue where the RMRR info
for devices being placed in and out of the SI Domain gets lost.

Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Tested-by: Shuah Khan <shuah.khan@hp.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Cc: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/intel-iommu.c |   31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -2327,8 +2327,39 @@ static int domain_add_dev_info(struct dm
 	return 0;
 }
 
+static bool device_has_rmrr(struct pci_dev *dev)
+{
+	struct dmar_rmrr_unit *rmrr;
+	int i;
+
+	for_each_rmrr_units(rmrr) {
+		for (i = 0; i < rmrr->devices_cnt; i++) {
+			/*
+			 * Return TRUE if this RMRR contains the device that
+			 * is passed in.
+			 */
+			if (rmrr->devices[i] == dev)
+				return true;
+		}
+	}
+	return false;
+}
+
 static int iommu_should_identity_map(struct pci_dev *pdev, int startup)
 {
+
+	/*
+	 * We want to prevent any device associated with an RMRR from
+	 * getting placed into the SI Domain. This is done because
+	 * problems exist when devices are moved in and out of domains
+	 * and their respective RMRR info is lost. We exempt USB devices
+	 * from this process due to their usage of RMRRs that are known
+	 * to not be needed after BIOS hand-off to OS.
+	 */
+	if (device_has_rmrr(pdev) &&
+	    (pdev->class >> 8) != PCI_CLASS_SERIAL_USB)
+		return 0;
+
 	if ((iommu_identity_mapping & IDENTMAP_AZALIA) && IS_AZALIA(pdev))
 		return 1;
 

[ 20/33] igb: release already assigned MSI-X interrupts if setup fails

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Assmann <sassmann@kpanic.de>

commit 52285b762b3681669215bf1d17ca6143448ab7d3 upstream.

During MSI-X setup the system might run out of vectors. If this happens the
already assigned vectors for this NIC should be freed before trying the
disable MSI-X. Failing to do so results in the following oops.

kernel BUG at drivers/pci/msi.c:341!
[...]
Call Trace:
 [<ffffffff8128f39d>] pci_disable_msix+0x3d/0x60
 [<ffffffffa037d1ce>] igb_reset_interrupt_capability+0x27/0x5c [igb]
 [<ffffffffa037d229>] igb_clear_interrupt_scheme+0x26/0x2d [igb]
 [<ffffffffa0384268>] igb_request_irq+0x73/0x297 [igb]
 [<ffffffffa0384554>] __igb_open+0xc8/0x223 [igb]
 [<ffffffffa0384815>] igb_open+0x13/0x15 [igb]
 [<ffffffff8144592f>] __dev_open+0xbf/0x120
 [<ffffffff81443e51>] __dev_change_flags+0xa1/0x180
 [<ffffffff81445828>] dev_change_flags+0x28/0x70
 [<ffffffff814af537>] devinet_ioctl+0x5b7/0x620
 [<ffffffff814b01c8>] inet_ioctl+0x88/0xa0
 [<ffffffff8142e8a0>] sock_do_ioctl+0x30/0x70
 [<ffffffff8142ecf2>] sock_ioctl+0x72/0x270
 [<ffffffff8118062c>] do_vfs_ioctl+0x8c/0x340
 [<ffffffff81180981>] sys_ioctl+0xa1/0xb0
 [<ffffffff815161a9>] system_call_fastpath+0x16/0x1b
Code: 48 89 df e8 1f 40 ed ff 4d 39 e6 49 8b 45 10 75 b6 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f c9 c3 48 8b 7b 20 e8 3e 91 db ff eb ae <0f> 0b eb fe 0f 1f 84 00 00 00 00 00 55 48 89 e5 0f 1f 44 00 00
RIP  [<ffffffff8128e144>] free_msi_irqs+0x124/0x130
 RSP <ffff880037503bd8>

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Abdallah Chatila <abdallah.chatila@ericsson.com>

---
 drivers/net/ethernet/intel/igb/igb_main.c |   22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -909,17 +909,18 @@ static int igb_request_msix(struct igb_a
 {
 	struct net_device *netdev = adapter->netdev;
 	struct e1000_hw *hw = &adapter->hw;
-	int i, err = 0, vector = 0;
+	int i, err = 0, vector = 0, free_vector = 0;
 
 	err = request_irq(adapter->msix_entries[vector].vector,
 	                  igb_msix_other, 0, netdev->name, adapter);
 	if (err)
-		goto out;
-	vector++;
+		goto err_out;
 
 	for (i = 0; i < adapter->num_q_vectors; i++) {
 		struct igb_q_vector *q_vector = adapter->q_vector[i];
 
+		vector++;
+
 		q_vector->itr_register = hw->hw_addr + E1000_EITR(vector);
 
 		if (q_vector->rx.ring && q_vector->tx.ring)
@@ -938,13 +939,22 @@ static int igb_request_msix(struct igb_a
 		                  igb_msix_ring, 0, q_vector->name,
 		                  q_vector);
 		if (err)
-			goto out;
-		vector++;
+			goto err_free;
 	}
 
 	igb_configure_msix(adapter);
 	return 0;
-out:
+
+err_free:
+	/* free already assigned IRQs */
+	free_irq(adapter->msix_entries[free_vector++].vector, adapter);
+
+	vector--;
+	for (i = 0; i < vector; i++) {
+		free_irq(adapter->msix_entries[free_vector++].vector,
+			 adapter->q_vector[i]);
+	}
+err_out:
 	return err;
 }
 

[ 21/33] xen/grant-table: correctly initialize grant table version 1

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matt Wilson <msw@amazon.com>

commit d0b4d64aadb9f4a90669848de9ef3819050a98cd upstream.

Commit 85ff6acb075a484780b3d763fdf41596d8fc0970 (xen/granttable: Grant
tables V2 implementation) changed the GREFS_PER_GRANT_FRAME macro from
a constant to a conditional expression. The expression depends on
grant_table_version being appropriately set. Unfortunately, at init
time grant_table_version will be 0. The GREFS_PER_GRANT_FRAME
conditional expression checks for "grant_table_version == 1", and
therefore returns the number of grant references per frame for v2.

This causes gnttab_init() to allocate fewer pages for gnttab_list, as
a frame can old half the number of v2 entries than v1 entries. After
gnttab_resume() is called, grant_table_version is appropriately
set. nr_init_grefs will then be miscalculated and gnttab_free_count
will hold a value larger than the actual number of free gref entries.

If a guest is heavily utilizing improperly initialized v1 grant
tables, memory corruption can occur. One common manifestation is
corruption of the vmalloc list, resulting in a poisoned pointer
derefrence when accessing /proc/meminfo or /proc/vmallocinfo:

[   40.770064] BUG: unable to handle kernel paging request at 0000200200001407
[   40.770083] IP: [<ffffffff811a6fb0>] get_vmalloc_info+0x70/0x110
[   40.770102] PGD 0
[   40.770107] Oops: 0000 [#1] SMP
[   40.770114] CPU 10

This patch introduces a static variable, grefs_per_grant_frame, to
cache the calculated value. gnttab_init() now calls
gnttab_request_version() early so that grant_table_version and
grefs_per_grant_frame can be appropriately set. A few BUG_ON()s have
been added to prevent this type of bug from reoccurring in the future.

Signed-off-by: Matt Wilson <msw@amazon.com>
Reviewed-and-Tested-by: Steven Noonan <snoonan@amazon.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Annie Li <annie.li@oracle.com>
Cc: xen-devel@lists.xen.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/grant-table.c |   48 +++++++++++++++++++++++++++-------------------
 1 file changed, 29 insertions(+), 19 deletions(-)

--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -56,10 +56,6 @@
 /* External tools reserve first few grant table entries. */
 #define NR_RESERVED_ENTRIES 8
 #define GNTTAB_LIST_END 0xffffffff
-#define GREFS_PER_GRANT_FRAME \
-(grant_table_version == 1 ?                      \
-(PAGE_SIZE / sizeof(struct grant_entry_v1)) :   \
-(PAGE_SIZE / sizeof(union grant_entry_v2)))
 
 static grant_ref_t **gnttab_list;
 static unsigned int nr_grant_frames;
@@ -154,6 +150,7 @@ static struct gnttab_ops *gnttab_interfa
 static grant_status_t *grstatus;
 
 static int grant_table_version;
+static int grefs_per_grant_frame;
 
 static struct gnttab_free_callback *gnttab_free_callback_list;
 
@@ -767,12 +764,14 @@ static int grow_gnttab_list(unsigned int
 	unsigned int new_nr_grant_frames, extra_entries, i;
 	unsigned int nr_glist_frames, new_nr_glist_frames;
 
+	BUG_ON(grefs_per_grant_frame == 0);
+
 	new_nr_grant_frames = nr_grant_frames + more_frames;
-	extra_entries       = more_frames * GREFS_PER_GRANT_FRAME;
+	extra_entries       = more_frames * grefs_per_grant_frame;
 
-	nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+	nr_glist_frames = (nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP;
 	new_nr_glist_frames =
-		(new_nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+		(new_nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP;
 	for (i = nr_glist_frames; i < new_nr_glist_frames; i++) {
 		gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_ATOMIC);
 		if (!gnttab_list[i])
@@ -780,12 +779,12 @@ static int grow_gnttab_list(unsigned int
 	}
 
 
-	for (i = GREFS_PER_GRANT_FRAME * nr_grant_frames;
-	     i < GREFS_PER_GRANT_FRAME * new_nr_grant_frames - 1; i++)
+	for (i = grefs_per_grant_frame * nr_grant_frames;
+	     i < grefs_per_grant_frame * new_nr_grant_frames - 1; i++)
 		gnttab_entry(i) = i + 1;
 
 	gnttab_entry(i) = gnttab_free_head;
-	gnttab_free_head = GREFS_PER_GRANT_FRAME * nr_grant_frames;
+	gnttab_free_head = grefs_per_grant_frame * nr_grant_frames;
 	gnttab_free_count += extra_entries;
 
 	nr_grant_frames = new_nr_grant_frames;
@@ -957,7 +956,8 @@ EXPORT_SYMBOL_GPL(gnttab_unmap_refs);
 
 static unsigned nr_status_frames(unsigned nr_grant_frames)
 {
-	return (nr_grant_frames * GREFS_PER_GRANT_FRAME + SPP - 1) / SPP;
+	BUG_ON(grefs_per_grant_frame == 0);
+	return (nr_grant_frames * grefs_per_grant_frame + SPP - 1) / SPP;
 }
 
 static int gnttab_map_frames_v1(xen_pfn_t *frames, unsigned int nr_gframes)
@@ -1115,6 +1115,7 @@ static void gnttab_request_version(void)
 	rc = HYPERVISOR_grant_table_op(GNTTABOP_set_version, &gsv, 1);
 	if (rc == 0 && gsv.version == 2) {
 		grant_table_version = 2;
+		grefs_per_grant_frame = PAGE_SIZE / sizeof(union grant_entry_v2);
 		gnttab_interface = &gnttab_v2_ops;
 	} else if (grant_table_version == 2) {
 		/*
@@ -1127,17 +1128,17 @@ static void gnttab_request_version(void)
 		panic("we need grant tables version 2, but only version 1 is available");
 	} else {
 		grant_table_version = 1;
+		grefs_per_grant_frame = PAGE_SIZE / sizeof(struct grant_entry_v1);
 		gnttab_interface = &gnttab_v1_ops;
 	}
 	printk(KERN_INFO "Grant tables using version %d layout.\n",
 		grant_table_version);
 }
 
-int gnttab_resume(void)
+static int gnttab_setup(void)
 {
 	unsigned int max_nr_gframes;
 
-	gnttab_request_version();
 	max_nr_gframes = gnttab_max_grant_frames();
 	if (max_nr_gframes < nr_grant_frames)
 		return -ENOSYS;
@@ -1160,6 +1161,12 @@ int gnttab_resume(void)
 	return 0;
 }
 
+int gnttab_resume(void)
+{
+	gnttab_request_version();
+	return gnttab_setup();
+}
+
 int gnttab_suspend(void)
 {
 	gnttab_interface->unmap_frames();
@@ -1171,9 +1178,10 @@ static int gnttab_expand(unsigned int re
 	int rc;
 	unsigned int cur, extra;
 
+	BUG_ON(grefs_per_grant_frame == 0);
 	cur = nr_grant_frames;
-	extra = ((req_entries + (GREFS_PER_GRANT_FRAME-1)) /
-		 GREFS_PER_GRANT_FRAME);
+	extra = ((req_entries + (grefs_per_grant_frame-1)) /
+		 grefs_per_grant_frame);
 	if (cur + extra > gnttab_max_grant_frames())
 		return -ENOSPC;
 
@@ -1191,21 +1199,23 @@ int gnttab_init(void)
 	unsigned int nr_init_grefs;
 	int ret;
 
+	gnttab_request_version();
 	nr_grant_frames = 1;
 	boot_max_nr_grant_frames = __max_nr_grant_frames();
 
 	/* Determine the maximum number of frames required for the
 	 * grant reference free list on the current hypervisor.
 	 */
+	BUG_ON(grefs_per_grant_frame == 0);
 	max_nr_glist_frames = (boot_max_nr_grant_frames *
-			       GREFS_PER_GRANT_FRAME / RPP);
+			       grefs_per_grant_frame / RPP);
 
 	gnttab_list = kmalloc(max_nr_glist_frames * sizeof(grant_ref_t *),
 			      GFP_KERNEL);
 	if (gnttab_list == NULL)
 		return -ENOMEM;
 
-	nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+	nr_glist_frames = (nr_grant_frames * grefs_per_grant_frame + RPP - 1) / RPP;
 	for (i = 0; i < nr_glist_frames; i++) {
 		gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_KERNEL);
 		if (gnttab_list[i] == NULL) {
@@ -1214,12 +1224,12 @@ int gnttab_init(void)
 		}
 	}
 
-	if (gnttab_resume() < 0) {
+	if (gnttab_setup() < 0) {
 		ret = -ENODEV;
 		goto ini_nomem;
 	}
 
-	nr_init_grefs = nr_grant_frames * GREFS_PER_GRANT_FRAME;
+	nr_init_grefs = nr_grant_frames * grefs_per_grant_frame;
 
 	for (i = NR_RESERVED_ENTRIES; i < nr_init_grefs - 1; i++)
 		gnttab_entry(i) = i + 1;

[ 22/33] xen: Fix stack corruption in xen_failsafe_callback for 32bit PVOPS guests.

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Cooper <andrew.cooper3@citrix.com>

commit 9174adbee4a9a49d0139f5d71969852b36720809 upstream.

This fixes CVE-2013-0190 / XSA-40

There has been an error on the xen_failsafe_callback path for failed
iret, which causes the stack pointer to be wrong when entering the
iret_exc error path.  This can result in the kernel crashing.

In the classic kernel case, the relevant code looked a little like:

        popl %eax      # Error code from hypervisor
        jz 5f
        addl $16,%esp
        jmp iret_exc   # Hypervisor said iret fault
5:      addl $16,%esp
                       # Hypervisor said segment selector fault

Here, there are two identical addls on either option of a branch which
appears to have been optimised by hoisting it above the jz, and
converting it to an lea, which leaves the flags register unaffected.

In the PVOPS case, the code looks like:

        popl_cfi %eax         # Error from the hypervisor
        lea 16(%esp),%esp     # Add $16 before choosing fault path
        CFI_ADJUST_CFA_OFFSET -16
        jz 5f
        addl $16,%esp         # Incorrectly adjust %esp again
        jmp iret_exc

It is possible unprivileged userspace applications to cause this
behaviour, for example by loading an LDT code selector, then changing
the code selector to be not-present.  At this point, there is a race
condition where it is possible for the hypervisor to return back to
userspace from an interrupt, fault on its own iret, and inject a
failsafe_callback into the kernel.

This bug has been present since the introduction of Xen PVOPS support
in commit 5ead97c84 (xen: Core Xen implementation), in 2.6.23.

Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/entry_32.S |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -1084,7 +1084,6 @@ ENTRY(xen_failsafe_callback)
 	lea 16(%esp),%esp
 	CFI_ADJUST_CFA_OFFSET -16
 	jz 5f
-	addl $16,%esp
 	jmp iret_exc
 5:	pushl_cfi $-1 /* orig_ax = -1 => not a system call */
 	SAVE_ALL

[ 23/33] USB: io_ti: Fix NULL dereference in chase_port()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wolfgang Frisch <wfpub@roembden.net>

commit 1ee0a224bc9aad1de496c795f96bc6ba2c394811 upstream.

The tty is NULL when the port is hanging up.
chase_port() needs to check for this.

This patch is intended for stable series.
The behavior was observed and tested in Linux 3.2 and 3.7.1.

Johan Hovold submitted a more elaborate patch for the mainline kernel.

[   56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84
[   56.278811] usb 1-1: USB disconnect, device number 3
[   56.278856] usb 1-1: edge_bulk_in_callback - stopping read!
[   56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8
[   56.280536] IP: [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0
[   56.282085] Oops: 0002 [#1] SMP
[   56.282744] Modules linked in:
[   56.283512] CPU 1
[   56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox
[   56.283512] RIP: 0010:[<ffffffff8144e62a>]  [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.283512] RSP: 0018:ffff88001fa99ab0  EFLAGS: 00010046
[   56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064
[   56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8
[   56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000
[   56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0
[   56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4
[   56.283512] FS:  0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000
[   56.283512] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0
[   56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80)
[   56.283512] Stack:
[   56.283512]  0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c
[   56.283512]  ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001
[   56.283512]  ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296
[   56.283512] Call Trace:
[   56.283512]  [<ffffffff810578ec>] ? add_wait_queue+0x12/0x3c
[   56.283512]  [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28
[   56.283512]  [<ffffffff812ffe81>] ? chase_port+0x84/0x2d6
[   56.283512]  [<ffffffff81063f27>] ? try_to_wake_up+0x199/0x199
[   56.283512]  [<ffffffff81263a5c>] ? tty_ldisc_hangup+0x222/0x298
[   56.283512]  [<ffffffff81300171>] ? edge_close+0x64/0x129
[   56.283512]  [<ffffffff810612f7>] ? __wake_up+0x35/0x46
[   56.283512]  [<ffffffff8106135b>] ? should_resched+0x5/0x23
[   56.283512]  [<ffffffff81264916>] ? tty_port_shutdown+0x39/0x44
[   56.283512]  [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28
[   56.283512]  [<ffffffff8125d38c>] ? __tty_hangup+0x307/0x351
[   56.283512]  [<ffffffff812e6ddc>] ? usb_hcd_flush_endpoint+0xde/0xed
[   56.283512]  [<ffffffff8144e625>] ? _raw_spin_lock_irqsave+0x14/0x35
[   56.283512]  [<ffffffff812fd361>] ? usb_serial_disconnect+0x57/0xc2
[   56.283512]  [<ffffffff812ea99b>] ? usb_unbind_interface+0x5c/0x131
[   56.283512]  [<ffffffff8128d738>] ? __device_release_driver+0x7f/0xd5
[   56.283512]  [<ffffffff8128d9cd>] ? device_release_driver+0x1a/0x25
[   56.283512]  [<ffffffff8128d393>] ? bus_remove_device+0xd2/0xe7
[   56.283512]  [<ffffffff8128b7a3>] ? device_del+0x119/0x167
[   56.283512]  [<ffffffff812e8d9d>] ? usb_disable_device+0x6a/0x180
[   56.283512]  [<ffffffff812e2ae0>] ? usb_disconnect+0x81/0xe6
[   56.283512]  [<ffffffff812e4435>] ? hub_thread+0x577/0xe82
[   56.283512]  [<ffffffff8144daa7>] ? __schedule+0x490/0x4be
[   56.283512]  [<ffffffff8105798f>] ? abort_exclusive_wait+0x79/0x79
[   56.283512]  [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f
[   56.283512]  [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f
[   56.283512]  [<ffffffff810570b4>] ? kthread+0x81/0x89
[   56.283512]  [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c
[   56.283512]  [<ffffffff8145387c>] ? ret_from_fork+0x7c/0xb0
[   56.283512]  [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c
[   56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00
<f0> 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66
[   56.283512] RIP  [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.283512]  RSP <ffff88001fa99ab0>
[   56.283512] CR2: 00000000000001c8
[   56.283512] ---[ end trace 49714df27e1679ce ]---

Signed-off-by: Wolfgang Frisch <wfpub@roembden.net>
Cc: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/io_ti.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -534,6 +534,9 @@ static void chase_port(struct edgeport_p
 	wait_queue_t wait;
 	unsigned long flags;
 
+	if (!tty)
+		return;
+
 	if (!timeout)
 		timeout = (HZ * EDGE_CLOSING_WAIT)/100;
 

[ 24/33] USB: option: add TP-LINK HSUPA Modem MA180

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit 99beb2e9687ffd61c92a9875141eabe6f57a71b9 upstream.

The driver description files gives these names to the vendor specific
functions on this modem:

 Diagnostics VID_2357&PID_0201&MI_00
 NMEA        VID_2357&PID_0201&MI_01
 Modem       VID_2357&PID_0201&MI_03
 Networkcard VID_2357&PID_0201&MI_04

Reported-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -450,6 +450,10 @@ static void option_instat_callback(struc
 #define PETATEL_VENDOR_ID			0x1ff4
 #define PETATEL_PRODUCT_NP10T			0x600e
 
+/* TP-LINK Incorporated products */
+#define TPLINK_VENDOR_ID			0x2357
+#define TPLINK_PRODUCT_MA180			0x0201
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -1312,6 +1316,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
 	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
+	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

[ 25/33] USB: option: blacklist network interface on ONDA MT8205 4G LTE

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

Signed-off-by: Bjørn Mork <bjorn@mork.no>

commit 2291dff02e5f8c708a46a7c4c888f2c467e26642 upstream.

The driver description files gives these names to the vendor specific
functions on this modem:

 Diag   VID_19D2&PID_0265&MI_00
 NMEA   VID_19D2&PID_0265&MI_01
 AT cmd VID_19D2&PID_0265&MI_02
 Modem  VID_19D2&PID_0265&MI_03
 Net    VID_19D2&PID_0265&MI_04

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -935,7 +935,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
 	  .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },

[ 26/33] serial:ifx6x60:Delete SPI timer when shut down port

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: chao bi <chao.bi@intel.com>

commit 014b9b4ce84281ccb3d723c792bed19815f3571a upstream.

When shut down SPI port, it's possible that MRDY has been asserted and a SPI
timer was activated waiting for SRDY assert, in the case, it needs to delete
this timer.

Signed-off-by: Chen Jun <jun.d.chen@intel.com>
Signed-off-by: channing <chao.bi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/ifx6x60.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -552,6 +552,7 @@ static void ifx_port_shutdown(struct tty
 		container_of(port, struct ifx_spi_device, tty_port);
 
 	mrdy_set_low(ifx_dev);
+	del_timer(&ifx_dev->spi_timer);
 	clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
 	tasklet_kill(&ifx_dev->io_work_tasklet);
 }

[ 27/33] tty: serial: vt8500: fix return value check in vt8500_serial_probe()

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>

commit a6dd114e16cbc4410049a90a8a67b967333d108d upstream.

In case of error, function of_clk_get() returns ERR_PTR()
and never returns NULL. The NULL test in the return value
check should be replaced with IS_ERR().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/vt8500_serial.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -604,7 +604,7 @@ static int __devinit vt8500_serial_probe
 	vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 
 	vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
-	if (vt8500_port->clk) {
+	if (!IS_ERR(vt8500_port->clk)) {
 		vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
 	} else {
 		/* use the default of 24Mhz if not specified and warn */

[ 28/33] tty: 8250_dw: Fix inverted arguments to serial_out in IRQ handler

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maxime Ripard <maxime.ripard@free-electrons.com>

commit 68e56cb3a068f9c30971c6117fbbd1e32918e49e upstream.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_dw.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -79,7 +79,7 @@ static int dw8250_handle_irq(struct uart
 	} else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
 		/* Clear the USR and write the LCR again. */
 		(void)p->serial_in(p, UART_USR);
-		p->serial_out(p, d->last_lcr, UART_LCR);
+		p->serial_out(p, UART_LCR, d->last_lcr);
 
 		return 1;
 	}

[ 29/33] 8250/16?50: Add support for Broadcom TruManage redirected serial port

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Hurd <shurd@broadcom.com>

commit ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 upstream.

Add support for the UART device present in Broadcom TruManage capable
NetXtreme chips (ie: 5761m 5762, and 5725).

This implementation has a hidden transmit FIFO, so running in single-byte
interrupt mode results in too many interrupts.  The UART_CAP_HFIFO
capability was added to track this.  It continues to reload the THR as long
as the THRE and TSRE bits are set in the LSR up to a specified limit (1024
is used here).

Signed-off-by: Stephen Hurd <shurd@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250.c     |   11 ++++++++++
 drivers/tty/serial/8250/8250.h     |    1 
 drivers/tty/serial/8250/8250_pci.c |   38 +++++++++++++++++++++++++++++++++++++
 include/uapi/linux/serial_core.h   |    4 ++-
 4 files changed, 53 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -290,6 +290,12 @@ static const struct serial8250_config ua
 				  UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_BRCM_TRUMANAGE] = {
+		.name		= "TruManage",
+		.fifo_size	= 1,
+		.tx_loadsz	= 1024,
+		.flags		= UART_CAP_HFIFO,
+	},
 	[PORT_8250_CIR] = {
 		.name		= "CIR port"
 	}
@@ -1441,6 +1447,11 @@ void serial8250_tx_chars(struct uart_825
 		port->icount.tx++;
 		if (uart_circ_empty(xmit))
 			break;
+		if (up->capabilities & UART_CAP_HFIFO) {
+			if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) !=
+			    BOTH_EMPTY)
+				break;
+		}
 	} while (--count > 0);
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -40,6 +40,7 @@ struct serial8250_config {
 #define UART_CAP_AFE	(1 << 11)	/* MCR-based hw flow control */
 #define UART_CAP_UUE	(1 << 12)	/* UART needs IER bit 6 set (Xscale) */
 #define UART_CAP_RTOIE	(1 << 13)	/* UART needs IER bit 4 set (Xscale, Tegra) */
+#define UART_CAP_HFIFO	(1 << 14)	/* UART has a "hidden" FIFO */
 
 #define UART_BUG_QUOT	(1 << 0)	/* UART has buggy quot LSB */
 #define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1085,6 +1085,18 @@ pci_omegapci_setup(struct serial_private
 	return setup_port(priv, port, 2, idx * 8, 0);
 }
 
+static int
+pci_brcm_trumanage_setup(struct serial_private *priv,
+			 const struct pciserial_board *board,
+			 struct uart_8250_port *port, int idx)
+{
+	int ret = pci_default_setup(priv, board, port, idx);
+
+	port->port.type = PORT_BRCM_TRUMANAGE;
+	port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+	return ret;
+}
+
 static int skip_tx_en_setup(struct serial_private *priv,
 			const struct pciserial_board *board,
 			struct uart_8250_port *port, int idx)
@@ -1213,6 +1225,7 @@ pci_wch_ch353_setup(struct serial_privat
 #define PCI_VENDOR_ID_AGESTAR		0x5372
 #define PCI_DEVICE_ID_AGESTAR_9375	0x6872
 #define PCI_VENDOR_ID_ASIX		0x9710
+#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -1788,6 +1801,17 @@ static struct pci_serial_quirk pci_seria
 		.setup		= pci_asix_setup,
 	},
 	/*
+	 * Broadcom TruManage (NetXtreme)
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_BROADCOM,
+		.device		= PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_brcm_trumanage_setup,
+	},
+
+	/*
 	 * Default "match everything" terminator entry
 	 */
 	{
@@ -1975,6 +1999,7 @@ enum pci_board_num_t {
 	pbn_ce4100_1_115200,
 	pbn_omegapci,
 	pbn_NETMOS9900_2s_115200,
+	pbn_brcm_trumanage,
 };
 
 /*
@@ -2674,6 +2699,12 @@ static struct pciserial_board pci_boards
 		.num_ports	= 2,
 		.base_baud	= 115200,
 	},
+	[pbn_brcm_trumanage] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.reg_shift	= 2,
+		.base_baud	= 115200,
+	},
 };
 
 static const struct pci_device_id blacklist[] = {
@@ -4238,6 +4269,13 @@ static struct pci_device_id serial_pci_t
 		pbn_omegapci },
 
 	/*
+	 * Broadcom TruManage
+	 */
+	{	PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_brcm_trumanage },
+
+	/*
 	 * AgeStar as-prs2-009
 	 */
 	{	PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375,
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -49,7 +49,9 @@
 #define PORT_XR17D15X	21	/* Exar XR17D15x UART */
 #define PORT_LPC3220	22	/* NXP LPC32xx SoC "Standard" UART */
 #define PORT_8250_CIR	23	/* CIR infrared port, has its own driver */
-#define PORT_MAX_8250	23	/* max port ID */
+#define PORT_XR17V35X	24	/* Exar XR17V35x UARTs */
+#define PORT_BRCM_TRUMANAGE	24
+#define PORT_MAX_8250	25	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed

[ 30/33] staging: wlan-ng: Fix clamping of returned SSID length

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tormod Volden <debian.tormod@gmail.com>

commit 811a37effdb11e54e1ff1ddaa944286c88f58487 upstream.

Commit 2e254212 broke listing of available network names, since it
clamped the length of the returned SSID to WLAN_BSSID_LEN (6) instead of
WLAN_SSID_MAXLEN (32).

https://bugzilla.kernel.org/show_bug.cgi?id=52501

Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/wlan-ng/prism2mgmt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/wlan-ng/prism2mgmt.c
+++ b/drivers/staging/wlan-ng/prism2mgmt.c
@@ -406,7 +406,7 @@ int prism2mgmt_scan_results(wlandevice_t
 	/* SSID */
 	req->ssid.status = P80211ENUM_msgitem_status_data_ok;
 	req->ssid.data.len = le16_to_cpu(item->ssid.len);
-	req->ssid.data.len = min_t(u16, req->ssid.data.len, WLAN_BSSID_LEN);
+	req->ssid.data.len = min_t(u16, req->ssid.data.len, WLAN_SSID_MAXLEN);
 	memcpy(req->ssid.data.data, item->ssid.data, req->ssid.data.len);
 
 	/* supported rates */

[ 31/33] staging: vt6656: Fix inconsistent structure packing

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

commit 1ee4c55fc9620451b2a825d793042a7e0775391b upstream.

vt6656 has several headers that use the #pragma pack(1) directive to
enable structure packing, but never disable it.  The layout of
structures defined in other headers can then depend on which order the
various headers are included in, breaking the One Definition Rule.

In practice this resulted in crashes on x86_64 until the order of header
inclusion was changed for some files in commit 11d404cb56ecd ('staging:
vt6656: fix headers and add cfg80211.').  But we need a proper fix that
won't be affected by future changes to the order of inclusion.

This removes the #pragma pack(1) directives and adds __packed to the
structure definitions for which packing appears to have been intended.

Reported-and-tested-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/vt6656/bssdb.h |    1 -
 drivers/staging/vt6656/int.h   |    1 -
 drivers/staging/vt6656/iocmd.h |   33 ++++++++++++++++-----------------
 drivers/staging/vt6656/iowpa.h |    8 +++-----
 4 files changed, 19 insertions(+), 24 deletions(-)

--- a/drivers/staging/vt6656/bssdb.h
+++ b/drivers/staging/vt6656/bssdb.h
@@ -90,7 +90,6 @@ typedef struct tagSRSNCapObject {
 } SRSNCapObject, *PSRSNCapObject;
 
 // BSS info(AP)
-#pragma pack(1)
 typedef struct tagKnownBSS {
     // BSS info
     BOOL            bActive;
--- a/drivers/staging/vt6656/int.h
+++ b/drivers/staging/vt6656/int.h
@@ -34,7 +34,6 @@
 #include "device.h"
 
 /*---------------------  Export Definitions -------------------------*/
-#pragma pack(1)
 typedef struct tagSINTData {
 	BYTE byTSR0;
 	BYTE byPkt0;
--- a/drivers/staging/vt6656/iocmd.h
+++ b/drivers/staging/vt6656/iocmd.h
@@ -95,13 +95,12 @@ typedef enum tagWZONETYPE {
 // Ioctl interface structure
 // Command structure
 //
-#pragma pack(1)
 typedef struct tagSCmdRequest {
 	u8 name[16];
 	void	*data;
 	u16	    wResult;
 	u16     wCmdCode;
-} SCmdRequest, *PSCmdRequest;
+} __packed SCmdRequest, *PSCmdRequest;
 
 //
 // Scan
@@ -111,7 +110,7 @@ typedef struct tagSCmdScan {
 
     u8	    ssid[SSID_MAXLEN + 2];
 
-} SCmdScan, *PSCmdScan;
+} __packed SCmdScan, *PSCmdScan;
 
 //
 // BSS Join
@@ -126,7 +125,7 @@ typedef struct tagSCmdBSSJoin {
     BOOL    bPSEnable;
     BOOL    bShareKeyAuth;
 
-} SCmdBSSJoin, *PSCmdBSSJoin;
+} __packed SCmdBSSJoin, *PSCmdBSSJoin;
 
 //
 // Zonetype Setting
@@ -137,7 +136,7 @@ typedef struct tagSCmdZoneTypeSet {
  BOOL       bWrite;
  WZONETYPE  ZoneType;
 
-} SCmdZoneTypeSet, *PSCmdZoneTypeSet;
+} __packed SCmdZoneTypeSet, *PSCmdZoneTypeSet;
 
 typedef struct tagSWPAResult {
          char	ifname[100];
@@ -145,7 +144,7 @@ typedef struct tagSWPAResult {
 	u8 key_mgmt;
 	u8 eap_type;
          BOOL authenticated;
-} SWPAResult, *PSWPAResult;
+} __packed SWPAResult, *PSWPAResult;
 
 typedef struct tagSCmdStartAP {
 
@@ -157,7 +156,7 @@ typedef struct tagSCmdStartAP {
     BOOL    bShareKeyAuth;
     u8      byBasicRate;
 
-} SCmdStartAP, *PSCmdStartAP;
+} __packed SCmdStartAP, *PSCmdStartAP;
 
 typedef struct tagSCmdSetWEP {
 
@@ -167,7 +166,7 @@ typedef struct tagSCmdSetWEP {
     BOOL    bWepKeyAvailable[WEP_NKEYS];
     u32     auWepKeyLength[WEP_NKEYS];
 
-} SCmdSetWEP, *PSCmdSetWEP;
+} __packed SCmdSetWEP, *PSCmdSetWEP;
 
 typedef struct tagSBSSIDItem {
 
@@ -180,14 +179,14 @@ typedef struct tagSBSSIDItem {
     BOOL    bWEPOn;
     u32     uRSSI;
 
-} SBSSIDItem;
+} __packed SBSSIDItem;
 
 
 typedef struct tagSBSSIDList {
 
 	u32		    uItem;
 	SBSSIDItem	sBSSIDList[0];
-} SBSSIDList, *PSBSSIDList;
+} __packed SBSSIDList, *PSBSSIDList;
 
 
 typedef struct tagSNodeItem {
@@ -208,7 +207,7 @@ typedef struct tagSNodeItem {
     u32            uTxAttempts;
     u16            wFailureRatio;
 
-} SNodeItem;
+} __packed SNodeItem;
 
 
 typedef struct tagSNodeList {
@@ -216,7 +215,7 @@ typedef struct tagSNodeList {
 	u32		    uItem;
 	SNodeItem	sNodeList[0];
 
-} SNodeList, *PSNodeList;
+} __packed SNodeList, *PSNodeList;
 
 
 typedef struct tagSCmdLinkStatus {
@@ -229,7 +228,7 @@ typedef struct tagSCmdLinkStatus {
     u32     uChannel;
     u32     uLinkRate;
 
-} SCmdLinkStatus, *PSCmdLinkStatus;
+} __packed SCmdLinkStatus, *PSCmdLinkStatus;
 
 //
 // 802.11 counter
@@ -247,7 +246,7 @@ typedef struct tagSDot11MIBCount {
     u32 ReceivedFragmentCount;
     u32 MulticastReceivedFrameCount;
     u32 FCSErrorCount;
-} SDot11MIBCount, *PSDot11MIBCount;
+} __packed SDot11MIBCount, *PSDot11MIBCount;
 
 
 
@@ -355,13 +354,13 @@ typedef struct tagSStatMIBCount {
     u32   ullTxBroadcastBytes[2];
     u32   ullTxMulticastBytes[2];
     u32   ullTxDirectedBytes[2];
-} SStatMIBCount, *PSStatMIBCount;
+} __packed SStatMIBCount, *PSStatMIBCount;
 
 typedef struct tagSCmdValue {
 
     u32     dwValue;
 
-} SCmdValue,  *PSCmdValue;
+} __packed SCmdValue,  *PSCmdValue;
 
 //
 // hostapd & viawget ioctl related
@@ -431,7 +430,7 @@ struct viawget_hostapd_param {
 			u8 ssid[32];
 		} scan_req;
 	} u;
-};
+} __packed;
 
 /*---------------------  Export Classes  ----------------------------*/
 
--- a/drivers/staging/vt6656/iowpa.h
+++ b/drivers/staging/vt6656/iowpa.h
@@ -67,12 +67,11 @@ enum {
 
 
 
-#pragma pack(1)
 typedef struct viawget_wpa_header {
 	u8 type;
 	u16 req_ie_len;
 	u16 resp_ie_len;
-} viawget_wpa_header;
+} __packed viawget_wpa_header;
 
 struct viawget_wpa_param {
 	u32 cmd;
@@ -113,9 +112,8 @@ struct viawget_wpa_param {
 			u8 *buf;
 		} scan_results;
 	} u;
-};
+} __packed;
 
-#pragma pack(1)
 struct viawget_scan_result {
 	u8 bssid[6];
 	u8 ssid[32];
@@ -130,7 +128,7 @@ struct viawget_scan_result {
 	int noise;
 	int level;
 	int maxrate;
-};
+} __packed;
 
 /*---------------------  Export Classes  ----------------------------*/
 

[ 32/33] mxs: uart: fix setting RTS from software

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steffen Trumtrar <s.trumtrar@pengutronix.de>

commit a6833214cfc6fa8a7c59426af77794cc190c6cfc upstream.

With the patch "serial: mxs-auart: fix the wrong RTS hardware flow control" the
mainline mxs-uart driver now sets RTSEN only when hardware flow control is
enabled via software. It is not possible any longer to set RTS manually via
software. However, the manual modification is a valid operation.
Regain the possibility to set RTS via software and only set RTSEN when hardware
flow control is explicitly enabled via settermios cflag CRTSCTS.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/mxs-auart.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -260,10 +260,12 @@ static void mxs_auart_set_mctrl(struct u
 
 	u32 ctrl = readl(u->membase + AUART_CTRL2);
 
-	ctrl &= ~AUART_CTRL2_RTSEN;
+	ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS);
 	if (mctrl & TIOCM_RTS) {
 		if (tty_port_cts_enabled(&u->state->port))
 			ctrl |= AUART_CTRL2_RTSEN;
+		else
+			ctrl |= AUART_CTRL2_RTS;
 	}
 
 	s->ctrl = mctrl;

[ 33/33] pty: return EINVAL for TIOCGPTN for BSD ptys

[Greg Kroah-Hartman]

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <jslaby@suse.cz>

commit ded2f295a36d17838fe97e80d7b6ea83381474f8 upstream.

Commit bbb63c514a3464342967237a51a21ea8f61ab951 (drivers:tty:fix up
ENOIOCTLCMD error handling) changed the default return value from tty
ioctl to be ENOTTY and not EINVAL. This is appropriate.

But in case of TIOCGPTN for the old BSD ptys glibc started failing
because it expects EINVAL to be returned. Only then it continues to
obtain the pts name the other way around.

So fix this case by explicit return of EINVAL in this case.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Florian Westphal <fw@strlen.de>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/pty.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -395,6 +395,8 @@ static int pty_bsd_ioctl(struct tty_stru
 		return pty_set_lock(tty, (int __user *) arg);
 	case TIOCSIG:    /* Send signal to other side of pty */
 		return pty_signal(tty, (int) arg);
+	case TIOCGPTN: /* TTY returns ENOTTY, but glibc expects EINVAL here */
+		return -EINVAL;
 	}
 	return -ENOIOCTLCMD;
 }

Re: [ 00/33] 3.7.4-stable review

[Shuah Khan]

On Fri, Jan 18, 2013 at 6:16 PM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 3.7.4 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Mon Jan 21 01:01:55 UTC 2013.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.7.4-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Patches applied cleanly to 3.0.y, 3.4.y, and 3.7.y.
Compiled and booted on the following systems:
HP EliteBook 6930p Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz
HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics

Cross-compile tests:
alpha: defconfig passed on all
arm: defconfig passed on all
arm64: not applicable to 3.0.y, 3.4.y. defconfig passed on 3.7.y
c6x: not applicable to 3.0.y, defconfig passed on 3.4.y, and 3.7.y.
mips: defconfig passed on all
mipsel: defconfig passed on all
powerpc: wii_defconfig passed on all
sh: defconfig passed on all
sparc: defconfig passed on all
tile: tilegx_defconfig passed on all

-- Shuah

Re: [ 00/33] 3.7.4-stable review

[Satoru Takeuchi]

At Fri, 18 Jan 2013 17:16:25 -0800,
Greg Kroah-Hartman wrote:
> 
> This is the start of the stable review cycle for the 3.7.4 release.
> There are 33 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

This kernel can be built and boot without any problem.
Building a kernel with this kernel also works fine.

 - Build Machine: debian wheezy x86_64
   CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz x 4
   memory: 8GB

 - Test machine: debian wheezy x86_64(KVM guest on the Build Machine)
   vCPU: x2
   memory: 2GB

I reviewed the following patches and it looks good to me.

> -------------
> Pseudo-Shortlog of commits:
...
> Jiri Slaby <jslaby@suse.cz>
>     pty: return EINVAL for TIOCGPTN for BSD ptys
...
> Maxime Ripard <maxime.ripard@free-electrons.com>
>     tty: 8250_dw: Fix inverted arguments to serial_out in IRQ handler
> 
> Wei Yongjun <yongjun_wei@trendmicro.com.cn>
>     tty: serial: vt8500: fix return value check in vt8500_serial_probe()
> 
> chao bi <chao.bi@intel.com>
>     serial:ifx6x60:Delete SPI timer when shut down port
...
> Eric Sandeen <sandeen@redhat.com>
>     ext4: init pagevec in ext4_da_block_invalidatepages
...
> Luciano Coelho <coelho@ti.com>
>     firmware: make sure the fw file size is not 0

Thanks,
Satoru