From: Robin Holt <holt@sgi.com>
To: Greg KH <gregkh@linuxfoundation.org>
Cc: Robin Holt <holt@sgi.com>,
stable@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: How should I proceed to get commit 891348c to 3.0.y?
Date: Thu, 24 Jan 2013 14:14:20 -0600 [thread overview]
Message-ID: <20130124201420.GI3438@sgi.com> (raw)
In-Reply-To: <20130124200034.GB24705@kroah.com>
On Thu, Jan 24, 2013 at 12:00:34PM -0800, Greg KH wrote:
> On Thu, Jan 24, 2013 at 12:30:10PM -0600, Robin Holt wrote:
> > On Thu, Jan 24, 2013 at 10:15:35AM -0800, Greg KH wrote:
> > > On Thu, Jan 24, 2013 at 09:28:51AM -0600, Robin Holt wrote:
> > > >
> > > > I missed the email from 12/31 indicating commit 891348c was pulled from
> > > > the 3.0.y stable tree due to a build breakage.
> > > >
> > > > That commit requires the enum defined in traps.h by commit c940826. That,
> > > > in turn depends on commit 228bdaa95f which depends upon earlier commits.
> > > >
> > > > How should I proceed? Should I give you a patch that uses the constants
> > > > in xpc_main.c? Should I add a patch which just pulls the enum portion of
> > > > commit c940826 into traps.h? Any other direction you think this should go?
> > >
> > > I think the last one makes the most sense as that makes it all
> > > self-contained and sensible, right?
> >
> > git diff c940826~..c940826 -- arch/x86/include/asm/traps.h | patch -p1
> > git commit -a -c c940826
> >
> > Then fixed it up to add a Signed-off-by: Robin Holt <holt@sgi.com>
> >
> > I then did a make x86_64_defconfig, make menuconfig to get SGI_XP
> > selected. I ran into a compile error where traps.h line 56 was failing
> > on __kprobes not being defined. I added the #include <linux/kprobes.h>
> > and now it builds.
> >
> > Here is the munged commit I currently have. With that 891348c can be
> > cherry-picked and will build. How should I proceed? Is this enough
> > for you to make progress? Should I clear out those Signed-off-by
> > lines for the submitter and HPA or should those stay?
>
> They should stay. resend this saying where the patch came from, and I
> will be glad to apply it. Also tell me what the original patch you
> wanted me to apply was as well, I forgot it :)
I changed the "Author:" line to me and added my own Signed-off-by:
line.
The original commit which needed this fixup was 891348c
Thanks,
Robin
commit b4ff8081e86ebf7bb8c1d4c93dfaaf81a4539ee6
Author: Robin Holt <holt@sgi.com>
Date: Fri Mar 9 16:07:10 2012 -0800
x86: Use enum instead of literals for trap values [PARTIAL]
The traps are referred to by their numbers and it can be difficult to
understand them while reading the code without context. This patch adds
enumeration of the trap numbers and replaces the numbers with the correct
enum for x86.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20120310000710.GA32667@www.outflux.net
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Robin Holt <holt@sgi.com>
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index 0310da6..1d44903 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -1,6 +1,7 @@
#ifndef _ASM_X86_TRAPS_H
#define _ASM_X86_TRAPS_H
+#include <linux/kprobes.h>
#include <asm/debugreg.h>
#include <asm/siginfo.h> /* TRAP_TRACE, ... */
@@ -87,4 +88,29 @@ asmlinkage void smp_thermal_interrupt(void);
asmlinkage void mce_threshold_interrupt(void);
#endif
+/* Interrupts/Exceptions */
+enum {
+ X86_TRAP_DE = 0, /* 0, Divide-by-zero */
+ X86_TRAP_DB, /* 1, Debug */
+ X86_TRAP_NMI, /* 2, Non-maskable Interrupt */
+ X86_TRAP_BP, /* 3, Breakpoint */
+ X86_TRAP_OF, /* 4, Overflow */
+ X86_TRAP_BR, /* 5, Bound Range Exceeded */
+ X86_TRAP_UD, /* 6, Invalid Opcode */
+ X86_TRAP_NM, /* 7, Device Not Available */
+ X86_TRAP_DF, /* 8, Double Fault */
+ X86_TRAP_OLD_MF, /* 9, Coprocessor Segment Overrun */
+ X86_TRAP_TS, /* 10, Invalid TSS */
+ X86_TRAP_NP, /* 11, Segment Not Present */
+ X86_TRAP_SS, /* 12, Stack Segment Fault */
+ X86_TRAP_GP, /* 13, General Protection Fault */
+ X86_TRAP_PF, /* 14, Page Fault */
+ X86_TRAP_SPURIOUS, /* 15, Spurious Interrupt */
+ X86_TRAP_MF, /* 16, x87 Floating-Point Exception */
+ X86_TRAP_AC, /* 17, Alignment Check */
+ X86_TRAP_MC, /* 18, Machine Check */
+ X86_TRAP_XF, /* 19, SIMD Floating-Point Exception */
+ X86_TRAP_IRET = 32, /* 32, IRET Exception */
+};
+
#endif /* _ASM_X86_TRAPS_H */
next prev parent reply other threads:[~2013-01-24 20:14 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-24 15:28 How should I proceed to get commit 891348c to 3.0.y? Robin Holt
2013-01-24 18:15 ` Greg KH
2013-01-24 18:30 ` Robin Holt
2013-01-24 20:00 ` Greg KH
2013-01-24 20:14 ` Robin Holt [this message]
2013-01-24 20:50 ` Greg KH
2013-01-24 20:52 ` Robin Holt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130124201420.GI3438@sgi.com \
--to=holt@sgi.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).