stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Larry Finger <Larry.Finger@lwfinger.net>,
	Nathaniel Doherty <ntdoherty@gmail.com>,
	Stanislaw Gruszka <sgruszka@redhat.com>,
	"John W. Linville" <linville@tuxdriver.com>
Subject: [ 02/61] rtlwifi: Fix scheduling while atomic bug
Date: Tue, 12 Feb 2013 12:34:22 -0800	[thread overview]
Message-ID: <20130212203418.315530789@linuxfoundation.org> (raw)
In-Reply-To: <20130212203417.890993903@linuxfoundation.org>

3.7-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit a5ffbe0a1993a27072742ef7db6cf9839956fce9 upstream.

Kernel commits 41affd5 and 6539306 changed the locking in rtl_lps_leave()
from a spinlock to a mutex by doing the calls indirectly from a work queue
to reduce the time that interrupts were disabled. This change was fine for
most systems; however a scheduling while atomic bug was reported in
https://bugzilla.redhat.com/show_bug.cgi?id=903881. The backtrace indicates
that routine rtl_is_special(), which calls rtl_lps_leave() in three places
was entered in atomic context. These direct calls are replaced by putting a
request on the appropriate work queue.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-and-tested-by: Nathaniel Doherty <ntdoherty@gmail.com>
Cc: Nathaniel Doherty <ntdoherty@gmail.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rtlwifi/base.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -980,7 +980,8 @@ u8 rtl_is_special_data(struct ieee80211_
 					 is_tx ? "Tx" : "Rx");
 
 				if (is_tx) {
-					rtl_lps_leave(hw);
+					schedule_work(&rtlpriv->
+						      works.lps_leave_work);
 					ppsc->last_delaylps_stamp_jiffies =
 					    jiffies;
 				}
@@ -990,7 +991,7 @@ u8 rtl_is_special_data(struct ieee80211_
 		}
 	} else if (ETH_P_ARP == ether_type) {
 		if (is_tx) {
-			rtl_lps_leave(hw);
+			schedule_work(&rtlpriv->works.lps_leave_work);
 			ppsc->last_delaylps_stamp_jiffies = jiffies;
 		}
 
@@ -1000,7 +1001,7 @@ u8 rtl_is_special_data(struct ieee80211_
 			 "802.1X %s EAPOL pkt!!\n", is_tx ? "Tx" : "Rx");
 
 		if (is_tx) {
-			rtl_lps_leave(hw);
+			schedule_work(&rtlpriv->works.lps_leave_work);
 			ppsc->last_delaylps_stamp_jiffies = jiffies;
 		}
 



  parent reply	other threads:[~2013-02-12 20:34 UTC|newest]

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-12 20:34 [ 00/61] 3.7.8-stable review Greg Kroah-Hartman
2013-02-12 20:34 ` [ 01/61] rtlwifi: Fix the usage of the wrong variable in usb.c Greg Kroah-Hartman
2013-02-12 20:34 ` Greg Kroah-Hartman [this message]
2013-02-12 20:34 ` [ 03/61] regulator: max8998: fix incorrect min_uV value for ldo10 Greg Kroah-Hartman
2013-02-12 20:34 ` [ 04/61] regulator: clear state each invocation of of_regulator_match Greg Kroah-Hartman
2013-02-12 20:34 ` [ 05/61] regulator: s2mps11: fix incorrect register for buck10 Greg Kroah-Hartman
2013-02-12 20:34 ` [ 06/61] IB/qib: Fix for broken sparse warning fix Greg Kroah-Hartman
2013-02-12 20:34 ` [ 07/61] virtio_console: Dont access uninitialized data Greg Kroah-Hartman
2013-02-12 20:34 ` [ 08/61] Bluetooth: Fix handling of unexpected SMP PDUs Greg Kroah-Hartman
2013-02-12 20:34 ` [ 09/61] Revert "iwlwifi: fix the reclaimed packet tracking upon flush queue" Greg Kroah-Hartman
2013-02-12 20:34 ` [ 10/61] can: c_can: Set reserved bit in IFx_MASK2 to 1 on write Greg Kroah-Hartman
2013-02-12 20:34 ` [ 11/61] mwifiex: fix incomplete scan in case of IE parsing error Greg Kroah-Hartman
2013-02-12 20:34 ` [ 12/61] e1000e: enable ECC on I217/I218 to catch packet buffer memory errors Greg Kroah-Hartman
2013-02-12 20:34 ` [ 13/61] media: pwc-if: must check vb2_queue_init() success Greg Kroah-Hartman
2013-02-12 20:34 ` [ 14/61] ath9k_hw: fix calibration issues on chainmask that dont include chain 0 Greg Kroah-Hartman
2013-02-12 20:34 ` [ 15/61] mfd: db8500-prcmu: Fix irqdomain usage Greg Kroah-Hartman
2013-02-12 20:34 ` [ 16/61] dm thin: fix queue limits stacking Greg Kroah-Hartman
2013-02-12 20:34 ` [ 17/61] net: prevent setting ttl=0 via IP_TTL Greg Kroah-Hartman
2013-02-12 20:34 ` [ 18/61] ipv6: fix the noflags test in addrconf_get_prefix_route Greg Kroah-Hartman
2013-02-12 20:34 ` [ 19/61] net, wireless: overwrite default_ethtool_ops Greg Kroah-Hartman
2013-02-12 20:34 ` [ 20/61] tcp: fix a panic on UP machines in reqsk_fastopen_remove Greg Kroah-Hartman
2013-02-12 20:34 ` [ 21/61] MAINTAINERS: Stephen Hemminger email change Greg Kroah-Hartman
2013-02-12 20:34 ` [ 22/61] ipv6: fix header length calculation in ip6_append_data() Greg Kroah-Hartman
2013-02-12 20:34 ` [ 23/61] macvlan: fix macvlan_get_size() Greg Kroah-Hartman
2013-02-12 20:34 ` [ 24/61] net: calxedaxgmac: throw away overrun frames Greg Kroah-Hartman
2013-02-12 20:34 ` [ 25/61] net/mlx4_en: Fix bridged vSwitch configuration for non SRIOV mode Greg Kroah-Hartman
2013-02-12 20:34 ` [ 26/61] net/mlx4_core: Set number of msix vectors under SRIOV mode to firmware defaults Greg Kroah-Hartman
2013-02-12 20:34 ` [ 27/61] tcp: fix incorrect LOCKDROPPEDICMPS counter Greg Kroah-Hartman
2013-02-12 20:34 ` [ 28/61] isdn/gigaset: fix zero size border case in debug dump Greg Kroah-Hartman
2013-02-12 20:34 ` [ 29/61] netxen: fix off by one bug in netxen_release_tx_buffer() Greg Kroah-Hartman
2013-02-12 20:34 ` [ 30/61] r8169: remove the obsolete and incorrect AMD workaround Greg Kroah-Hartman
2013-02-12 20:34 ` [ 31/61] net: loopback: fix a dst refcounting issue Greg Kroah-Hartman
2013-02-12 20:34 ` [ 32/61] IP_GRE: Fix kernel panic in IP_GRE with GRE csum Greg Kroah-Hartman
2013-02-12 20:34 ` [ 33/61] pktgen: correctly handle failures when adding a device Greg Kroah-Hartman
2013-02-12 20:34 ` [ 34/61] ipv6: do not create neighbor entries for local delivery Greg Kroah-Hartman
2013-02-12 20:34 ` [ 35/61] via-rhine: Fix bugs in NAPI support Greg Kroah-Hartman
2013-02-12 20:34 ` [ 36/61] packet: fix leakage of tx_ring memory Greg Kroah-Hartman
2013-02-12 20:34 ` [ 37/61] ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit() Greg Kroah-Hartman
2013-02-12 20:34 ` [ 38/61] atm/iphase: rename fregt_t -> ffreg_t Greg Kroah-Hartman
2013-02-12 20:34 ` [ 39/61] xen/netback: shutdown the ring if it contains garbage Greg Kroah-Hartman
2013-02-12 20:35 ` [ 40/61] xen/netback: dont leak pages on failure in xen_netbk_tx_check_gop Greg Kroah-Hartman
2013-02-12 20:35 ` [ 41/61] xen/netback: free already allocated memory on failure in xen_netbk_get_requests Greg Kroah-Hartman
2013-02-12 20:35 ` [ 42/61] netback: correct netbk_tx_err to handle wrap around Greg Kroah-Hartman
2013-02-12 20:35 ` [ 43/61] ipv4: Remove output route check in ipv4_mtu Greg Kroah-Hartman
2013-02-12 20:35 ` [ 44/61] ipv4: Dont update the pmtu on mtu locked routes Greg Kroah-Hartman
2013-02-12 20:35 ` [ 45/61] ipv6: Add an error handler for icmp6 Greg Kroah-Hartman
2013-02-12 20:35 ` [ 46/61] ipv4: Invalidate the socket cached route on pmtu events if possible Greg Kroah-Hartman
2013-02-12 20:35 ` [ 47/61] ipv4: Add a socket release callback for datagram sockets Greg Kroah-Hartman
2013-02-12 20:35 ` [ 48/61] ipv4: Fix route refcount on pmtu discovery Greg Kroah-Hartman
2013-02-12 20:35 ` [ 49/61] sctp: refactor sctp_outq_teardown to insure proper re-initalization Greg Kroah-Hartman
2013-02-12 20:35 ` [ 50/61] net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree Greg Kroah-Hartman
2013-02-12 20:35 ` [ 51/61] net: sctp: sctp_endpoint_free: zero out secret key data Greg Kroah-Hartman
2013-02-12 20:35 ` [ 52/61] tcp: detect SYN/data drop when F-RTO is disabled Greg Kroah-Hartman
2013-02-12 20:35 ` [ 53/61] tcp: fix an infinite loop in tcp_slow_start() Greg Kroah-Hartman
2013-02-12 20:35 ` [ 54/61] tcp: frto should not set snd_cwnd to 0 Greg Kroah-Hartman
2013-02-12 20:35 ` [ 55/61] tcp: fix for zero packets_in_flight was too broad Greg Kroah-Hartman
2013-02-12 20:35 ` [ 56/61] tcp: dont abort splice() after small transfers Greg Kroah-Hartman
2013-02-12 20:35 ` [ 57/61] tcp: splice: fix an infinite loop in tcp_read_sock() Greg Kroah-Hartman
2013-02-12 20:35 ` [ 58/61] tcp: fix splice() and tcp collapsing interaction Greg Kroah-Hartman
2013-02-12 20:35 ` [ 59/61] net: splice: avoid high order page splitting Greg Kroah-Hartman
2013-02-12 20:35 ` [ 60/61] net: splice: fix __splice_segment() Greg Kroah-Hartman
2013-02-12 20:35 ` [ 61/61] drm/nouveau: add lockdep annotations Greg Kroah-Hartman
2013-02-13  3:35   ` Peter Hurley
2013-02-13  9:33     ` Arend van Spriel
2013-02-13  9:43       ` Ben Skeggs
2013-02-13  9:52         ` Arend van Spriel
2013-02-13 17:46         ` Marcin Slusarz
2013-02-13 18:38           ` Marcin Slusarz
2013-02-13  7:06 ` [ 00/61] 3.7.8-stable review Satoru Takeuchi
2013-02-13 15:51 ` Shuah Khan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130212203418.315530789@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=Larry.Finger@lwfinger.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=ntdoherty@gmail.com \
    --cc=sgruszka@redhat.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).