From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Somnath Kotur <somnath.kotur@emulex.com>,
"David S. Miller" <davem@davemloft.net>,
Jacek Luczak <difrost.kernel@gmail.com>
Subject: [ 36/36] be2net: Fix to trim skb for padded vlan packets to workaround an ASIC Bug
Date: Tue, 12 Feb 2013 12:41:30 -0800 [thread overview]
Message-ID: <20130212203901.474654300@linuxfoundation.org> (raw)
In-Reply-To: <20130212203857.305594226@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Somnath Kotur <somnath.kotur@emulex.com>
commit 93040ae5cc8dcc893eca4a4366dc8415af278edf upstream.
Fixed spelling error in a comment as pointed out by DaveM.
Also refactored existing code a bit to provide placeholders for another ASIC
Bug workaround that will be checked-in soon after this.
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Jacek Luczak <difrost.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/emulex/benet/be.h | 5 ++
drivers/net/ethernet/emulex/benet/be_main.c | 56 +++++++++++++++++++++-------
2 files changed, 47 insertions(+), 14 deletions(-)
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -536,6 +536,11 @@ static inline void be_check_sriov_fn_typ
adapter->is_virtfn = (sli_intf & SLI_INTF_FT_MASK) ? 1 : 0;
}
+static inline bool is_ipv4_pkt(struct sk_buff *skb)
+{
+ return skb->protocol == ntohs(ETH_P_IP) && ip_hdr(skb)->version == 4;
+}
+
static inline void be_vf_eth_addr_generate(struct be_adapter *adapter, u8 *mac)
{
u32 addr;
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -571,6 +571,11 @@ static inline u16 be_get_tx_vlan_tag(str
return vlan_tag;
}
+static int be_vlan_tag_chk(struct be_adapter *adapter, struct sk_buff *skb)
+{
+ return vlan_tx_tag_present(skb) || adapter->pvid;
+}
+
static void wrb_fill_hdr(struct be_adapter *adapter, struct be_eth_hdr_wrb *hdr,
struct sk_buff *skb, u32 wrb_cnt, u32 len)
{
@@ -698,33 +703,56 @@ dma_err:
return 0;
}
+static struct sk_buff *be_insert_vlan_in_pkt(struct be_adapter *adapter,
+ struct sk_buff *skb)
+{
+ u16 vlan_tag = 0;
+
+ skb = skb_share_check(skb, GFP_ATOMIC);
+ if (unlikely(!skb))
+ return skb;
+
+ if (vlan_tx_tag_present(skb)) {
+ vlan_tag = be_get_tx_vlan_tag(adapter, skb);
+ __vlan_put_tag(skb, vlan_tag);
+ skb->vlan_tci = 0;
+ }
+
+ return skb;
+}
+
static netdev_tx_t be_xmit(struct sk_buff *skb,
struct net_device *netdev)
{
struct be_adapter *adapter = netdev_priv(netdev);
struct be_tx_obj *txo = &adapter->tx_obj[skb_get_queue_mapping(skb)];
struct be_queue_info *txq = &txo->q;
+ struct iphdr *ip = NULL;
u32 wrb_cnt = 0, copied = 0;
- u32 start = txq->head;
+ u32 start = txq->head, eth_hdr_len;
bool dummy_wrb, stopped = false;
- /* For vlan tagged pkts, BE
- * 1) calculates checksum even when CSO is not requested
- * 2) calculates checksum wrongly for padded pkt less than
- * 60 bytes long.
- * As a workaround disable TX vlan offloading in such cases.
+ eth_hdr_len = ntohs(skb->protocol) == ETH_P_8021Q ?
+ VLAN_ETH_HLEN : ETH_HLEN;
+
+ /* HW has a bug which considers padding bytes as legal
+ * and modifies the IPv4 hdr's 'tot_len' field
*/
- if (unlikely(vlan_tx_tag_present(skb) &&
- (skb->ip_summed != CHECKSUM_PARTIAL || skb->len <= 60))) {
- skb = skb_share_check(skb, GFP_ATOMIC);
- if (unlikely(!skb))
- goto tx_drop;
+ if (skb->len <= 60 && be_vlan_tag_chk(adapter, skb) &&
+ is_ipv4_pkt(skb)) {
+ ip = (struct iphdr *)ip_hdr(skb);
+ pskb_trim(skb, eth_hdr_len + ntohs(ip->tot_len));
+ }
- skb = __vlan_put_tag(skb, be_get_tx_vlan_tag(adapter, skb));
+ /* HW has a bug wherein it will calculate CSUM for VLAN
+ * pkts even though it is disabled.
+ * Manually insert VLAN in pkt.
+ */
+ if (skb->ip_summed != CHECKSUM_PARTIAL &&
+ be_vlan_tag_chk(adapter, skb)) {
+ skb = be_insert_vlan_in_pkt(adapter, skb);
if (unlikely(!skb))
goto tx_drop;
-
- skb->vlan_tci = 0;
}
wrb_cnt = wrb_cnt_for_skb(adapter, skb, &dummy_wrb);
next prev parent reply other threads:[~2013-02-12 20:41 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-12 20:40 [ 00/36] 3.4.31-stable review Greg Kroah-Hartman
2013-02-12 20:40 ` [ 01/36] rtlwifi: Fix the usage of the wrong variable in usb.c Greg Kroah-Hartman
2013-02-12 20:40 ` [ 02/36] rtlwifi: Fix scheduling while atomic bug Greg Kroah-Hartman
2013-02-12 20:40 ` [ 03/36] virtio_console: Dont access uninitialized data Greg Kroah-Hartman
2013-02-12 20:40 ` [ 04/36] kernel/resource.c: fix stack overflow in __reserve_region_with_split() Greg Kroah-Hartman
2013-02-12 20:40 ` [ 05/36] Bluetooth: Fix handling of unexpected SMP PDUs Greg Kroah-Hartman
2013-02-12 20:41 ` [ 06/36] efi: Make efi_enabled a function to query EFI facilities Greg Kroah-Hartman
2013-02-12 20:41 ` [ 07/36] samsung-laptop: Disable on EFI hardware Greg Kroah-Hartman
2013-02-12 20:41 ` [ 08/36] net: prevent setting ttl=0 via IP_TTL Greg Kroah-Hartman
2013-02-12 20:41 ` [ 09/36] ipv6: fix the noflags test in addrconf_get_prefix_route Greg Kroah-Hartman
2013-02-12 20:41 ` [ 10/36] MAINTAINERS: Stephen Hemminger email change Greg Kroah-Hartman
2013-02-12 20:41 ` [ 11/36] ipv6: fix header length calculation in ip6_append_data() Greg Kroah-Hartman
2013-02-12 20:41 ` [ 12/36] net: calxedaxgmac: throw away overrun frames Greg Kroah-Hartman
2013-02-12 20:41 ` [ 13/36] net/mlx4_en: Fix bridged vSwitch configuration for non SRIOV mode Greg Kroah-Hartman
2013-02-12 20:41 ` [ 14/36] net/mlx4_core: Set number of msix vectors under SRIOV mode to firmware defaults Greg Kroah-Hartman
2013-02-12 20:41 ` [ 15/36] isdn/gigaset: fix zero size border case in debug dump Greg Kroah-Hartman
2013-02-12 20:41 ` [ 16/36] netxen: fix off by one bug in netxen_release_tx_buffer() Greg Kroah-Hartman
2013-02-12 20:41 ` [ 17/36] r8169: remove the obsolete and incorrect AMD workaround Greg Kroah-Hartman
2013-02-12 20:41 ` [ 18/36] net: loopback: fix a dst refcounting issue Greg Kroah-Hartman
2013-02-12 20:41 ` [ 19/36] pktgen: correctly handle failures when adding a device Greg Kroah-Hartman
2013-02-12 20:41 ` [ 20/36] ipv6: do not create neighbor entries for local delivery Greg Kroah-Hartman
2013-02-12 20:41 ` [ 21/36] via-rhine: Fix bugs in NAPI support Greg Kroah-Hartman
2013-02-12 20:41 ` [ 22/36] packet: fix leakage of tx_ring memory Greg Kroah-Hartman
2013-02-12 20:41 ` [ 23/36] atm/iphase: rename fregt_t -> ffreg_t Greg Kroah-Hartman
2013-02-12 20:41 ` [ 24/36] sctp: refactor sctp_outq_teardown to insure proper re-initalization Greg Kroah-Hartman
2013-02-12 20:41 ` [ 25/36] net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree Greg Kroah-Hartman
2013-02-12 20:41 ` [ 26/36] net: sctp: sctp_endpoint_free: zero out secret key data Greg Kroah-Hartman
2013-02-12 20:41 ` [ 27/36] xen/netback: shutdown the ring if it contains garbage Greg Kroah-Hartman
2013-02-12 20:41 ` [ 28/36] xen/netback: dont leak pages on failure in xen_netbk_tx_check_gop Greg Kroah-Hartman
2013-02-12 20:41 ` [ 29/36] xen/netback: free already allocated memory on failure in xen_netbk_get_requests Greg Kroah-Hartman
2013-02-12 20:41 ` [ 30/36] netback: correct netbk_tx_err to handle wrap around Greg Kroah-Hartman
2013-02-12 20:41 ` [ 31/36] tcp: frto should not set snd_cwnd to 0 Greg Kroah-Hartman
2013-02-12 20:41 ` [ 32/36] tcp: fix for zero packets_in_flight was too broad Greg Kroah-Hartman
2013-02-12 20:41 ` [ 33/36] bridge: Pull ip header into skb->data before looking into ip header Greg Kroah-Hartman
2013-02-12 20:41 ` [ 34/36] tg3: Avoid null pointer dereference in tg3_interrupt in netconsole mode Greg Kroah-Hartman
2013-02-12 20:41 ` [ 35/36] tg3: Fix crc errors on jumbo frame receive Greg Kroah-Hartman
2013-02-12 20:41 ` Greg Kroah-Hartman [this message]
2013-02-13 9:23 ` [ 00/36] 3.4.31-stable review Satoru Takeuchi
2013-02-13 15:52 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130212203901.474654300@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=difrost.kernel@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=somnath.kotur@emulex.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).