From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Simon Baatz <gmbnomis@gmail.com>,
Andrew Lunn <andrew@lunn.ch>, Jason Cooper <jason@lakedaemon.net>
Subject: [ 33/40] rtc: rtc-mv: Add support for clk to avoid lockups
Date: Tue, 12 Mar 2013 15:43:54 -0700 [thread overview]
Message-ID: <20130312223214.995095830@linuxfoundation.org> (raw)
In-Reply-To: <20130312223211.492954675@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Lunn <andrew@lunn.ch>
commit 89c58c198b252f2bc20657fdd72a2aea788c435c upstream.
The Marvell RTC on Kirkwood makes use of the runit clock. Ensure the
driver clk_prepare_enable() this clock, otherwise there is a danger
the SoC will lockup when accessing RTC registers with the clock
disabled.
Reported-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/kirkwood.dtsi | 1 +
drivers/rtc/rtc-mv.c | 28 ++++++++++++++++++++++++----
2 files changed, 25 insertions(+), 4 deletions(-)
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -31,6 +31,7 @@
compatible = "mrvl,kirkwood-rtc", "mrvl,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
+ clocks = <&gate_clk 7>;
};
};
};
--- a/drivers/rtc/rtc-mv.c
+++ b/drivers/rtc/rtc-mv.c
@@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <linux/gfp.h>
#include <linux/module.h>
@@ -41,6 +42,7 @@ struct rtc_plat_data {
struct rtc_device *rtc;
void __iomem *ioaddr;
int irq;
+ struct clk *clk;
};
static int mv_rtc_set_time(struct device *dev, struct rtc_time *tm)
@@ -221,6 +223,7 @@ static int __devinit mv_rtc_probe(struct
struct rtc_plat_data *pdata;
resource_size_t size;
u32 rtc_time;
+ int ret = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -239,11 +242,17 @@ static int __devinit mv_rtc_probe(struct
if (!pdata->ioaddr)
return -ENOMEM;
+ pdata->clk = devm_clk_get(&pdev->dev, NULL);
+ /* Not all SoCs require a clock.*/
+ if (!IS_ERR(pdata->clk))
+ clk_prepare_enable(pdata->clk);
+
/* make sure the 24 hours mode is enabled */
rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
if (rtc_time & RTC_HOURS_12H_MODE) {
dev_err(&pdev->dev, "24 Hours mode not supported.\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
/* make sure it is actually functional */
@@ -252,7 +261,8 @@ static int __devinit mv_rtc_probe(struct
rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
if (rtc_time == 0x01000000) {
dev_err(&pdev->dev, "internal RTC not ticking\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto out;
}
}
@@ -268,8 +278,10 @@ static int __devinit mv_rtc_probe(struct
} else
pdata->rtc = rtc_device_register(pdev->name, &pdev->dev,
&mv_rtc_ops, THIS_MODULE);
- if (IS_ERR(pdata->rtc))
- return PTR_ERR(pdata->rtc);
+ if (IS_ERR(pdata->rtc)) {
+ ret = PTR_ERR(pdata->rtc);
+ goto out;
+ }
if (pdata->irq >= 0) {
writel(0, pdata->ioaddr + RTC_ALARM_INTERRUPT_MASK_REG_OFFS);
@@ -282,6 +294,11 @@ static int __devinit mv_rtc_probe(struct
}
return 0;
+out:
+ if (!IS_ERR(pdata->clk))
+ clk_disable_unprepare(pdata->clk);
+
+ return ret;
}
static int __exit mv_rtc_remove(struct platform_device *pdev)
@@ -292,6 +309,9 @@ static int __exit mv_rtc_remove(struct p
device_init_wakeup(&pdev->dev, 0);
rtc_device_unregister(pdata->rtc);
+ if (!IS_ERR(pdata->clk))
+ clk_disable_unprepare(pdata->clk);
+
return 0;
}
next prev parent reply other threads:[~2013-03-12 22:43 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-12 22:43 [ 00/40] 3.4.36-stable review Greg Kroah-Hartman
2013-03-12 22:43 ` [ 01/40] ARM: VFP: fix emulation of second VFP instruction Greg Kroah-Hartman
2013-03-12 22:43 ` [ 02/40] ARM: fix scheduling while atomic warning in alignment handling code Greg Kroah-Hartman
2013-03-12 22:43 ` [ 03/40] xen/pci: We dont do multiple MSIs Greg Kroah-Hartman
2013-03-12 22:43 ` [ 04/40] SCSI: dc395x: uninitialized variable in device_alloc() Greg Kroah-Hartman
2013-03-12 22:43 ` [ 05/40] SCSI: storvsc: Initialize the sglist Greg Kroah-Hartman
2013-03-12 22:43 ` [ 06/40] target/pscsi: Fix page increment Greg Kroah-Hartman
2013-03-12 22:43 ` [ 07/40] btrfs: Init io_lock after cloning btrfs device struct Greg Kroah-Hartman
2013-03-12 22:43 ` [ 08/40] cifs: ensure that cifs_get_root() only traverses directories Greg Kroah-Hartman
2013-03-12 22:43 ` [ 09/40] NFS: Dont allow NFS silly-renamed files to be deleted, no signal Greg Kroah-Hartman
2013-03-12 22:43 ` [ 10/40] SUNRPC: Dont start the retransmission timer when out of socket space Greg Kroah-Hartman
2013-03-12 22:43 ` [ 11/40] ata_piix: reenable MS Virtual PC guests Greg Kroah-Hartman
2013-03-12 22:43 ` [ 12/40] hw_random: make buffer usable in scatterlist Greg Kroah-Hartman
2013-03-13 22:54 ` Satoru Takeuchi
2013-03-14 6:41 ` Rusty Russell
2013-03-14 13:24 ` [PATCH] hw_random: free rng_buffer at module exit Satoru Takeuchi
2013-03-15 5:05 ` Rusty Russell
2013-03-17 2:14 ` Ben Hutchings
2013-03-18 2:40 ` Rusty Russell
2013-03-20 0:29 ` Satoru Takeuchi
2013-03-12 22:43 ` [ 13/40] mwifiex: correct sleep delay counter Greg Kroah-Hartman
2013-03-12 22:43 ` [ 14/40] ath9k: fix RSSI dummy marker value Greg Kroah-Hartman
2013-03-12 22:43 ` [ 15/40] ath9k_hw: improve reset reliability after errors Greg Kroah-Hartman
2013-03-12 22:43 ` [ 16/40] md: protect against crash upon fsync on ro array Greg Kroah-Hartman
2013-03-12 22:43 ` [ 17/40] md: fix two bugs when attempting to resize RAID0 array Greg Kroah-Hartman
2013-03-12 22:43 ` [ 18/40] md: raid0: fix error return from create_stripe_zones Greg Kroah-Hartman
2013-03-12 22:43 ` [ 19/40] hwmon: (sht15) Check return value of regulator_enable() Greg Kroah-Hartman
2013-03-12 22:43 ` [ 20/40] hwmon: (pmbus/ltc2978) Fix peak attribute handling Greg Kroah-Hartman
2013-03-12 22:43 ` [ 21/40] hwmon: (pmbus/ltc2978) Use detected chip ID to select supported functionality Greg Kroah-Hartman
2013-03-12 22:43 ` [ 22/40] drm/radeon: add primary dac adj quirk for R200 board Greg Kroah-Hartman
2013-03-12 22:43 ` [ 23/40] ARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK to include NSH bit Greg Kroah-Hartman
2013-03-12 22:43 ` [ 24/40] ALSA: ice1712: Initialize card->private_data properly Greg Kroah-Hartman
2013-03-12 22:43 ` [ 25/40] ALSA: vmaster: Fix slave change notification Greg Kroah-Hartman
2013-03-12 22:43 ` [ 26/40] e1000e: fix pci-device enable-counter balance Greg Kroah-Hartman
2013-03-12 22:43 ` [ 27/40] HID: logitech-dj: do not directly call hid_output_raw_report() during probe Greg Kroah-Hartman
2013-03-12 22:43 ` [ 28/40] xen/pat: Disable PAT using pat_enabled value Greg Kroah-Hartman
2013-03-12 22:43 ` [ 29/40] crypto: user - fix info leaks in report API Greg Kroah-Hartman
2013-03-12 22:43 ` [ 30/40] keys: fix race with concurrent install_user_keyrings() Greg Kroah-Hartman
2013-03-12 22:43 ` [ 31/40] Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and security keys Greg Kroah-Hartman
2013-03-12 22:43 ` [ 32/40] vfs: fix pipe counter breakage Greg Kroah-Hartman
2013-03-12 22:43 ` Greg Kroah-Hartman [this message]
2013-03-12 23:08 ` [ 33/40] rtc: rtc-mv: Add support for clk to avoid lockups Jason Cooper
2013-03-12 23:15 ` Greg Kroah-Hartman
2013-03-12 22:43 ` [ 34/40] Fix memory leak in cpufreq stats Greg Kroah-Hartman
2013-03-12 22:43 ` [ 35/40] ftrace: Update the kconfig for DYNAMIC_FTRACE Greg Kroah-Hartman
2013-03-12 22:43 ` [ 36/40] dmi_scan: fix missing check for _DMI_ signature in smbios_present() Greg Kroah-Hartman
2013-03-12 22:43 ` [ 37/40] USB: Dont use EHCI port sempahore for USB 3.0 hubs Greg Kroah-Hartman
2013-03-12 22:43 ` [ 38/40] USB: Prepare for refactoring by adding extra udev checks Greg Kroah-Hartman
2013-03-12 22:44 ` [ 39/40] USB: Rip out recursive call on warm port reset Greg Kroah-Hartman
2013-03-12 22:44 ` [ 40/40] Revert "ALSA: hda - hdmi: Make jacks phantom, if theyre not detectable" Greg Kroah-Hartman
2013-03-13 3:57 ` [ 00/40] 3.4.36-stable review Shuah Khan
2013-03-14 13:39 ` Satoru Takeuchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130312223214.995095830@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=andrew@lunn.ch \
--cc=gmbnomis@gmail.com \
--cc=jason@lakedaemon.net \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).