From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Peter Korsgaard <jacmet@sunsite.dk>,
Johan Hovold <jhovold@gmail.com>,
Nicolas Ferre <nicolas.ferre@atmel.com>
Subject: [ 30/48] atmel_lcdfb: fix 16-bpp modes on older SOCs
Date: Mon, 18 Mar 2013 14:08:38 -0700 [thread overview]
Message-ID: <20130318210812.387223270@linuxfoundation.org> (raw)
In-Reply-To: <20130318210810.247845918@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <jhovold@gmail.com>
commit a79eac7165ed62114e6ca197195aa5060a54f137 upstream.
Fix regression introduced by commit 787f9fd23283 ("atmel_lcdfb: support
16bit BGR:565 mode, remove unsupported 15bit modes") which broke 16-bpp
modes for older SOCs which use IBGR:555 (msb is intensity) rather
than BGR:565.
Use SOC-type to determine the pixel layout.
Tested on at91sam9263 and at91sam9g45.
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/video/atmel_lcdfb.c | 22 +++++++++++++++-------
include/video/atmel_lcdc.h | 1 +
2 files changed, 16 insertions(+), 7 deletions(-)
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -422,17 +422,22 @@ static int atmel_lcdfb_check_var(struct
= var->bits_per_pixel;
break;
case 16:
+ /* Older SOCs use IBGR:555 rather than BGR:565. */
+ if (sinfo->have_intensity_bit)
+ var->green.length = 5;
+ else
+ var->green.length = 6;
+
if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
- /* RGB:565 mode */
- var->red.offset = 11;
+ /* RGB:5X5 mode */
+ var->red.offset = var->green.length + 5;
var->blue.offset = 0;
} else {
- /* BGR:565 mode */
+ /* BGR:5X5 mode */
var->red.offset = 0;
- var->blue.offset = 11;
+ var->blue.offset = var->green.length + 5;
}
var->green.offset = 5;
- var->green.length = 6;
var->red.length = var->blue.length = 5;
break;
case 32:
@@ -679,8 +684,7 @@ static int atmel_lcdfb_setcolreg(unsigne
case FB_VISUAL_PSEUDOCOLOR:
if (regno < 256) {
- if (cpu_is_at91sam9261() || cpu_is_at91sam9263()
- || cpu_is_at91sam9rl()) {
+ if (sinfo->have_intensity_bit) {
/* old style I+BGR:555 */
val = ((red >> 11) & 0x001f);
val |= ((green >> 6) & 0x03e0);
@@ -870,6 +874,10 @@ static int __init atmel_lcdfb_probe(stru
}
sinfo->info = info;
sinfo->pdev = pdev;
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9263() ||
+ cpu_is_at91sam9rl()) {
+ sinfo->have_intensity_bit = true;
+ }
strcpy(info->fix.id, sinfo->pdev->name);
info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -62,6 +62,7 @@ struct atmel_lcdfb_info {
void (*atmel_lcdfb_power_control)(int on);
struct fb_monspecs *default_monspecs;
u32 pseudo_palette[16];
+ bool have_intensity_bit;
};
#define ATMEL_LCDC_DMABADDR1 0x00
next prev parent reply other threads:[~2013-03-18 21:08 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-18 21:08 [ 00/48] 3.4.37-stable review Greg Kroah-Hartman
2013-03-18 21:08 ` [ 01/48] qcaux: add Franklin U600 Greg Kroah-Hartman
2013-03-18 21:08 ` [ 02/48] xen/pciback: Dont disable a PCI device that is already disabled Greg Kroah-Hartman
2013-03-18 21:08 ` [ 03/48] virtio: rng: disallow multiple device registrations, fixes crashes Greg Kroah-Hartman
2013-03-18 21:08 ` [ 04/48] USB: option: add Huawei E5331 Greg Kroah-Hartman
2013-03-18 21:08 ` [ 05/48] USB: cdc-wdm: fix buffer overflow Greg Kroah-Hartman
2013-03-18 21:08 ` [ 06/48] usb: cp210x new Vendor/Device IDs Greg Kroah-Hartman
2013-03-18 21:08 ` [ 07/48] USB: added support for Cinterions products AH6 and PLS8 Greg Kroah-Hartman
2013-03-18 21:08 ` [ 08/48] usb: serial: Add Rigblaster Advantage to device table Greg Kroah-Hartman
2013-03-18 21:08 ` [ 09/48] USB: storage: fix Huawei mode switching regression Greg Kroah-Hartman
2013-03-18 21:08 ` [ 10/48] USB: EHCI: dont check DMA values in QH overlays Greg Kroah-Hartman
2013-03-18 21:08 ` [ 11/48] staging: vt6656: Fix oops on resume from suspend Greg Kroah-Hartman
2013-03-18 21:08 ` [ 12/48] signal: always clear sa_restorer on execve Greg Kroah-Hartman
2013-03-18 21:08 ` [ 13/48] ext3: Fix format string issues Greg Kroah-Hartman
2013-03-18 21:08 ` [ 14/48] serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller Greg Kroah-Hartman
2013-03-18 21:08 ` [ 15/48] tty: serial: fix typo "ARCH_S5P6450" Greg Kroah-Hartman
2013-03-18 21:08 ` [ 16/48] TTY: do not reset masters packet mode Greg Kroah-Hartman
2013-03-18 21:08 ` [ 17/48] perf,x86: fix kernel crash with PEBS/BTS after suspend/resume Greg Kroah-Hartman
2013-03-18 21:08 ` [ 18/48] ALSA: seq: Fix missing error handling in snd_seq_timer_open() Greg Kroah-Hartman
2013-03-18 21:08 ` [ 19/48] hwmon: (pmbus/ltc2978) Fix temperature reporting Greg Kroah-Hartman
2013-03-18 21:08 ` [ 20/48] hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes Greg Kroah-Hartman
2013-03-18 21:08 ` [ 21/48] w1: fix oops when w1_search is called from netlink connector Greg Kroah-Hartman
2013-03-18 21:08 ` [ 22/48] powerpc: Fix STAB initialization Greg Kroah-Hartman
2013-03-18 21:08 ` [ 23/48] powerpc: Fix cputable entry for 970MP rev 1.0 Greg Kroah-Hartman
2013-03-18 21:08 ` [ 24/48] selinux: use GFP_ATOMIC under spin_lock Greg Kroah-Hartman
2013-03-18 21:08 ` [ 25/48] perf,x86: fix wrmsr_on_cpu() warning on suspend/resume Greg Kroah-Hartman
2013-03-18 21:08 ` [ 26/48] perf,x86: fix link failure for non-Intel configs Greg Kroah-Hartman
2013-03-18 21:08 ` [ 27/48] s390: critical section cleanup vs. machine checks Greg Kroah-Hartman
2013-03-18 21:08 ` [ 28/48] s390/mm: fix flush_tlb_kernel_range() Greg Kroah-Hartman
2013-03-18 21:08 ` [ 29/48] btrfs: use rcu_barrier() to wait for bdev puts at unmount Greg Kroah-Hartman
2013-03-18 21:08 ` Greg Kroah-Hartman [this message]
2013-03-18 21:08 ` [ 31/48] drm/i915: EBUSY status handling added to i915_gem_fault() Greg Kroah-Hartman
2013-03-18 21:08 ` [ 32/48] hwmon: (sht15) Fix memory leak if regulator_enable() fails Greg Kroah-Hartman
2013-03-18 21:08 ` [ 33/48] block: use i_size_write() in bd_set_size() Greg Kroah-Hartman
2013-03-18 21:08 ` [ 34/48] loopdev: fix a deadlock Greg Kroah-Hartman
2013-03-18 21:08 ` [ 35/48] loopdev: remove an user triggerable oops Greg Kroah-Hartman
2013-03-18 21:08 ` [ 36/48] drm/i915: Increase the RC6p threshold Greg Kroah-Hartman
2013-03-18 21:08 ` [ 37/48] l2tp: Restore socket refcount when sendmsg succeeds Greg Kroah-Hartman
2013-03-18 21:08 ` [ 38/48] rds: limit the size allocated by rds_message_alloc() Greg Kroah-Hartman
2013-03-18 21:08 ` [ 39/48] net: ipv6: Dont purge default router if accept_ra=2 Greg Kroah-Hartman
2013-03-18 21:08 ` [ 40/48] tcp: fix double-counted receiver RTT when leaving receiver fast path Greg Kroah-Hartman
2013-03-18 21:08 ` [ 41/48] tun: add a missing nf_reset() in tun_net_xmit() Greg Kroah-Hartman
2013-03-18 21:08 ` [ 42/48] macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode Greg Kroah-Hartman
2013-03-18 21:08 ` [ 43/48] netlabel: correctly list all the static label mappings Greg Kroah-Hartman
2013-03-18 21:08 ` [ 44/48] bridging: fix rx_handlers return code Greg Kroah-Hartman
2013-03-18 21:08 ` [ 45/48] ipv6: stop multicast forwarding to process interface scoped addresses Greg Kroah-Hartman
2013-03-18 21:08 ` [ 46/48] rtnl: fix info leak on RTM_GETLINK request for VF devices Greg Kroah-Hartman
2013-03-18 21:08 ` [ 47/48] dcbnl: fix various netlink info leaks Greg Kroah-Hartman
2013-03-18 21:08 ` [ 48/48] 6lowpan: Fix endianness issue in is_addr_link_local() Greg Kroah-Hartman
2013-03-19 0:50 ` [ 00/48] 3.4.37-stable review Shuah Khan
2013-03-19 0:57 ` Parag Warudkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130318210812.387223270@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=jacmet@sunsite.dk \
--cc=jhovold@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).