From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, "BjÞrn Mork" <bjorn@mork.no>,
fangxiaozhi@huawei.com
Subject: [ 08/40] USB: storage: fix Huawei mode switching regression
Date: Mon, 18 Mar 2013 14:10:46 -0700 [thread overview]
Message-ID: <20130318211016.868166650@linuxfoundation.org> (raw)
In-Reply-To: <20130318211016.254453918@linuxfoundation.org>
3.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjørn Mork <bjorn@mork.no>
commit ab4b71644a26d1ab92b987b2fd30e17c25e89f85 upstream.
This reverts commit 200e0d99 ("USB: storage: optimize to match the
Huawei USB storage devices and support new switch command" and the
followup bugfix commit cd060956 ("USB: storage: properly handle
the endian issues of idProduct").
The commit effectively added a large number of Huawei devices to
the deprecated usb-storage mode switching logic. Many of these
devices have been in use and supported by the userspace
usb_modeswitch utility for years. Forcing the switching inside
the kernel causes a number of regressions as a result of ignoring
existing onfigurations, and also completely takes away the ability
to configure mode switching per device/system/user.
Known regressions caused by this:
- Some of the devices support multiple modes, using different
switching commands. There are existing configurations taking
advantage of this.
- There is a real use case for disabling mode switching and
instead mounting the exposed storage device. This becomes
impossible with switching logic inside the usb-storage driver.
- At least on device fail as a result of the usb-storage switching
command, becoming completely unswitchable. This is possibly a
firmware bug, but still a regression because the device work as
expected using usb_modeswitch defaults.
In-kernel mode switching was deprecated years ago with the
development of the more user friendly userspace alternatives. The
existing list of devices in usb-storage was only kept to prevent
breaking already working systems. The long term plan is to remove
the list, not to add to it. Ref:
http://permalink.gmane.org/gmane.linux.usb.general/28543
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: <fangxiaozhi@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/storage/initializers.c | 76 --------
drivers/usb/storage/initializers.h | 4
drivers/usb/storage/unusual_devs.h | 329 ++++++++++++++++++++++++++++++++++++-
3 files changed, 331 insertions(+), 78 deletions(-)
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -92,8 +92,8 @@ int usb_stor_ucr61s2b_init(struct us_dat
return 0;
}
-/* This places the HUAWEI usb dongles in multi-port mode */
-static int usb_stor_huawei_feature_init(struct us_data *us)
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
{
int result;
@@ -104,75 +104,3 @@ static int usb_stor_huawei_feature_init(
US_DEBUGP("Huawei mode set result is %d\n", result);
return 0;
}
-
-/*
- * It will send a scsi switch command called rewind' to huawei dongle.
- * When the dongle receives this command at the first time,
- * it will reboot immediately. After rebooted, it will ignore this command.
- * So it is unnecessary to read its response.
- */
-static int usb_stor_huawei_scsi_init(struct us_data *us)
-{
- int result = 0;
- int act_len = 0;
- struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
- char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
- 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
- bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
- bcbw->Tag = 0;
- bcbw->DataTransferLength = 0;
- bcbw->Flags = bcbw->Lun = 0;
- bcbw->Length = sizeof(rewind_cmd);
- memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
- memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
-
- result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
- US_BULK_CB_WRAP_LEN, &act_len);
- US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
- return result;
-}
-
-/*
- * It tries to find the supported Huawei USB dongles.
- * In Huawei, they assign the following product IDs
- * for all of their mobile broadband dongles,
- * including the new dongles in the future.
- * So if the product ID is not included in this list,
- * it means it is not Huawei's mobile broadband dongles.
- */
-static int usb_stor_huawei_dongles_pid(struct us_data *us)
-{
- struct usb_interface_descriptor *idesc;
- int idProduct;
-
- idesc = &us->pusb_intf->cur_altsetting->desc;
- idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
- /* The first port is CDROM,
- * means the dongle in the single port mode,
- * and a switch command is required to be sent. */
- if (idesc && idesc->bInterfaceNumber == 0) {
- if ((idProduct == 0x1001)
- || (idProduct == 0x1003)
- || (idProduct == 0x1004)
- || (idProduct >= 0x1401 && idProduct <= 0x1500)
- || (idProduct >= 0x1505 && idProduct <= 0x1600)
- || (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
- return 1;
- }
- }
- return 0;
-}
-
-int usb_stor_huawei_init(struct us_data *us)
-{
- int result = 0;
-
- if (usb_stor_huawei_dongles_pid(us)) {
- if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
- result = usb_stor_huawei_scsi_init(us);
- else
- result = usb_stor_huawei_feature_init(us);
- }
- return result;
-}
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -46,5 +46,5 @@ int usb_stor_euscsi_init(struct us_data
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
-/* This places the HUAWEI usb dongles in multi-port mode */
-int usb_stor_huawei_init(struct us_data *us);
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1515,10 +1515,335 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x
/* Reported by fangxiaozhi <huananhu@huawei.com>
* This brings the HUAWEI data card devices into multi-port mode
*/
-UNUSUAL_VENDOR_INTF(0x12d1, 0x08, 0x06, 0x50,
+UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
next prev parent reply other threads:[~2013-03-18 21:10 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-18 21:10 [ 00/40] 3.0.70-stable review Greg Kroah-Hartman
2013-03-18 21:10 ` [ 01/40] qcaux: add Franklin U600 Greg Kroah-Hartman
2013-03-18 21:10 ` [ 02/40] virtio: rng: disallow multiple device registrations, fixes crashes Greg Kroah-Hartman
2013-03-18 21:10 ` [ 03/40] USB: option: add Huawei E5331 Greg Kroah-Hartman
2013-03-18 21:10 ` [ 04/40] USB: cdc-wdm: fix buffer overflow Greg Kroah-Hartman
2013-03-18 21:10 ` [ 05/40] usb: cp210x new Vendor/Device IDs Greg Kroah-Hartman
2013-03-18 21:10 ` [ 06/40] USB: added support for Cinterions products AH6 and PLS8 Greg Kroah-Hartman
2013-03-18 21:10 ` [ 07/40] usb: serial: Add Rigblaster Advantage to device table Greg Kroah-Hartman
2013-03-18 21:10 ` Greg Kroah-Hartman [this message]
2013-03-18 21:10 ` [ 09/40] USB: EHCI: dont check DMA values in QH overlays Greg Kroah-Hartman
2013-03-18 21:10 ` [ 10/40] staging: vt6656: Fix oops on resume from suspend Greg Kroah-Hartman
2013-03-18 21:10 ` [ 11/40] signal: always clear sa_restorer on execve Greg Kroah-Hartman
2013-03-18 21:10 ` [ 12/40] ext3: Fix format string issues Greg Kroah-Hartman
2013-03-18 21:10 ` [ 13/40] tty: serial: fix typo "ARCH_S5P6450" Greg Kroah-Hartman
2013-03-18 21:10 ` [ 14/40] TTY: do not reset masters packet mode Greg Kroah-Hartman
2013-03-18 21:10 ` [ 15/40] md: protect against crash upon fsync on ro array Greg Kroah-Hartman
2013-03-18 21:10 ` [ 16/40] Revert duplicated perf commit Greg Kroah-Hartman
2013-03-21 3:31 ` Ben Hutchings
2013-03-18 21:10 ` [ 17/40] ALSA: seq: Fix missing error handling in snd_seq_timer_open() Greg Kroah-Hartman
2013-03-18 21:10 ` [ 18/40] hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes Greg Kroah-Hartman
2013-03-18 21:10 ` [ 19/40] w1: fix oops when w1_search is called from netlink connector Greg Kroah-Hartman
2013-03-18 21:10 ` [ 20/40] powerpc: Fix cputable entry for 970MP rev 1.0 Greg Kroah-Hartman
2013-03-18 21:10 ` [ 21/40] selinux: use GFP_ATOMIC under spin_lock Greg Kroah-Hartman
2013-03-18 21:11 ` [ 22/40] perf,x86: fix kernel crash with PEBS/BTS after suspend/resume Greg Kroah-Hartman
2013-03-18 21:11 ` [ 23/40] perf,x86: fix wrmsr_on_cpu() warning on suspend/resume Greg Kroah-Hartman
2013-03-18 21:11 ` [ 24/40] perf,x86: fix link failure for non-Intel configs Greg Kroah-Hartman
2013-03-18 21:11 ` [ 25/40] s390/mm: fix flush_tlb_kernel_range() Greg Kroah-Hartman
2013-03-18 21:11 ` [ 26/40] btrfs: use rcu_barrier() to wait for bdev puts at unmount Greg Kroah-Hartman
2013-03-18 21:11 ` [ 27/40] drm/i915: EBUSY status handling added to i915_gem_fault() Greg Kroah-Hartman
2013-03-18 21:11 ` [ 28/40] hwmon: (sht15) Fix memory leak if regulator_enable() fails Greg Kroah-Hartman
2013-03-18 21:11 ` [ 29/40] block: use i_size_write() in bd_set_size() Greg Kroah-Hartman
2013-03-18 21:11 ` [ 30/40] loopdev: fix a deadlock Greg Kroah-Hartman
2013-03-18 21:11 ` [ 31/40] l2tp: Restore socket refcount when sendmsg succeeds Greg Kroah-Hartman
2013-03-18 21:11 ` [ 32/40] rds: limit the size allocated by rds_message_alloc() Greg Kroah-Hartman
2013-03-18 21:11 ` [ 33/40] net: ipv6: Dont purge default router if accept_ra=2 Greg Kroah-Hartman
2013-03-18 21:11 ` [ 34/40] tcp: fix double-counted receiver RTT when leaving receiver fast path Greg Kroah-Hartman
2013-03-18 21:11 ` [ 35/40] tun: add a missing nf_reset() in tun_net_xmit() Greg Kroah-Hartman
2013-03-18 21:11 ` [ 36/40] netlabel: correctly list all the static label mappings Greg Kroah-Hartman
2013-03-18 21:11 ` [ 37/40] bridging: fix rx_handlers return code Greg Kroah-Hartman
2013-03-18 21:11 ` [ 38/40] ipv6: stop multicast forwarding to process interface scoped addresses Greg Kroah-Hartman
2013-03-18 21:11 ` [ 39/40] rtnl: fix info leak on RTM_GETLINK request for VF devices Greg Kroah-Hartman
2013-03-18 21:11 ` [ 40/40] dcbnl: fix various netlink info leaks Greg Kroah-Hartman
2013-03-19 0:47 ` [ 00/40] 3.0.70-stable review Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130318211016.868166650@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=bjorn@mork.no \
--cc=fangxiaozhi@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).