[ 00/49] 3.0.71-stable review

[ 00/49] 3.0.71-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.0.71 release.
There are 49 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Mar 28 22:57:54 UTC 2013.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.0.71-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.0.71-rc1

Ben Hutchings <ben@decadent.org.uk>
    asus-laptop: Do not call HWRS on init

Felix Fietkau <nbd@openwrt.org>
    rt2x00: error in configurations with mesh support disabled

Kees Cook <keescook@chromium.org>
    exec: use -ELOOP for max recursion depth

Lekensteyn <lekensteyn@gmail.com>
    i915: initialize CADL in opregion

Mathias Krause <minipli@googlemail.com>
    udf: avoid info leak on export

Mathias Krause <minipli@googlemail.com>
    isofs: avoid info leak on export

Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
    Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and security keys

Alan Cox <alan@linux.intel.com>
    key: Fix resource leak

Johan Hovold <jhovold@gmail.com>
    USB: io_ti: fix get_icount for two port adapters

Johan Hovold <jhovold@gmail.com>
    USB: garmin_gps: fix memory leak on disconnect

Jan Kara <jack@suse.cz>
    udf: Fix bitmap overflow on large filesystems with small block size

Johan Hovold <jhovold@gmail.com>
    USB: serial: fix interface refcounting

Dmitry Torokhov <dtor@vmware.com>
    USB: xhci - fix bit definitions for IMAN register

CQ Tang <cq.tang@intel.com>
    x86-64: Fix the failure case in copy_user_handle_tail()

Mark Rutland <mark.rutland@arm.com>
    clockevents: Don't allow dummy broadcast timers

Mike Marciniszyn <mike.marciniszyn@intel.com>
    IPoIB: Fix send lockup due to missed TX completion

Dmitry Artamonow <mad_soft@inbox.ru>
    usb-storage: add unusual_devs entry for Samsung YP-Z3 mp3 player

Zheng Liu <wenqing.lz@taobao.com>
    ext4: fix the wrong number of the allocated blocks in ext4_split_extent()

Jeff Layton <jlayton@redhat.com>
    cifs: ignore everything in SPNEGO blob after mechTypes

Wanpeng Li <liwanp@linux.vnet.ibm.com>
    mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting

Torsten Duwe <torsten@lst.de>
    KMS: fix EDID detailed timing vsync parsing

Kees Cook <keescook@chromium.org>
    drm/i915: bounds check execbuffer relocation count

Bing Zhao <bzhao@marvell.com>
    mwifiex: fix potential out-of-boundary access to ibss rate table

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    tracing: Fix free of probe entry by calling call_rcu_sched()

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    tracing: Fix race in snapshot swapping

Kees Cook <keescook@chromium.org>
    drm/i915: restrict kernel address leak in debugfs

Daniel Mack <zonque@gmail.com>
    ALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls()

Daniel Mack <zonque@gmail.com>
    ALSA: snd-usb: mixer: propagate errors up the call chain

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Fix typo in checking IEC958 emphasis bit

Ben Hutchings <bhutchings@solarflare.com>
    sfc: Only use TX push if a single descriptor is to be written

Ben Hutchings <bhutchings@solarflare.com>
    sfc: Disable soft interrupt handling during efx_device_detach_sync()

Ben Hutchings <bhutchings@solarflare.com>
    sfc: Detach net device when stopping queues for reconfiguration

Ben Hutchings <bhutchings@solarflare.com>
    sfc: Fix efx_rx_buf_offset() in the presence of swiotlb

Ben Hutchings <bhutchings@solarflare.com>
    sfc: Properly sync RX DMA buffer when it is not the last in the page

Ben Hutchings <bhutchings@solarflare.com>
    sfc: Fix timekeeping in efx_mcdi_poll()

Daniel Pieczko <dpieczko@solarflare.com>
    sfc: lock TX queues when calling netif_device_detach()

Ben Hutchings <bhutchings@solarflare.com>
    sfc: Fix two causes of flush failure

Ben Hutchings <bhutchings@solarflare.com>
    sfc: Convert firmware subtypes to native byte order in efx_mcdi_get_board_cfg()

Stuart Hodgson <smhodgson@solarflare.com>
    sfc: Do not attempt to flush queues if DMA is disabled

Steve Hodgson <shodgson@solarflare.com>
    sfc: Fix Siena mac statistics on big endian platforms

Ben Hutchings <bhutchings@solarflare.com>
    sfc: Fix loop condition for efx_filter_search() when !for_insert

Hannes Frederic Sowa <hannes@stressinduktion.org>
    inet: limit length of fragment queue hash table bucket lists

Vlad Yasevich <vyasevic@redhat.com>
    rtnetlink: Mask the rta_type when range checking

Denis V. Lunev <den@openvz.org>
    ipv4: fix definition of FIB_TABLE_HASHSZ

Xufeng Zhang <xufeng.zhang@windriver.com>
    sctp: don't break the loop while meeting the active_path so as to find the matched transport

Veaceslav Falico <vfalico@redhat.com>
    netconsole: don't call __netpoll_cleanup() while atomic

David Ward <david.ward@ll.mit.edu>
    net/ipv4: Ensure that location of timestamp option is stored

Tkhai Kirill <tkhai@yandex.ru>
    sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline option

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "USB: EHCI: don't check DMA values in QH overlays"


-------------

Diffstat:

 Makefile                                   |  4 +--
 arch/x86/lib/usercopy_64.c                 |  4 +--
 drivers/gpu/drm/drm_edid.c                 |  2 +-
 drivers/gpu/drm/i915/i915_debugfs.c        |  2 +-
 drivers/gpu/drm/i915/i915_gem_execbuffer.c | 11 +++++--
 drivers/gpu/drm/i915/intel_opregion.c      | 23 ++++++++++++-
 drivers/infiniband/ulp/ipoib/ipoib_cm.c    |  8 +++--
 drivers/net/netconsole.c                   | 20 +++++------
 drivers/net/sfc/efx.c                      | 53 +++++++++++++++++++-----------
 drivers/net/sfc/efx.h                      | 13 ++++++++
 drivers/net/sfc/falcon.c                   |  2 ++
 drivers/net/sfc/filter.c                   | 41 +++++++++++++----------
 drivers/net/sfc/mcdi.c                     | 29 +++++++++-------
 drivers/net/sfc/mcdi.h                     |  1 +
 drivers/net/sfc/mcdi_mac.c                 |  4 ++-
 drivers/net/sfc/net_driver.h               | 10 +++++-
 drivers/net/sfc/nic.c                      | 24 +++++++++++---
 drivers/net/sfc/nic.h                      |  2 ++
 drivers/net/sfc/rx.c                       | 25 ++++++++------
 drivers/net/sfc/selftest.c                 |  2 +-
 drivers/net/sfc/siena.c                    | 29 +++++++++++-----
 drivers/net/wireless/mwifiex/join.c        |  7 ++--
 drivers/net/wireless/rt2x00/rt2x00dev.c    |  2 ++
 drivers/platform/x86/asus-laptop.c         | 17 +++-------
 drivers/tty/serial/sunsu.c                 | 21 +++++-------
 drivers/usb/host/ehci-q.c                  | 18 +++-------
 drivers/usb/host/xhci.h                    |  4 +--
 drivers/usb/serial/garmin_gps.c            |  7 +---
 drivers/usb/serial/io_ti.c                 |  1 +
 drivers/usb/serial/usb-serial.c            |  3 +-
 drivers/usb/storage/unusual_devs.h         |  7 ++++
 fs/binfmt_em86.c                           |  1 -
 fs/binfmt_misc.c                           |  6 ----
 fs/binfmt_script.c                         |  4 +--
 fs/cifs/asn1.c                             | 53 +++---------------------------
 fs/compat.c                                | 15 ++++-----
 fs/exec.c                                  | 10 +++---
 fs/ext4/extents.c                          |  6 +++-
 fs/isofs/export.c                          |  1 +
 fs/udf/namei.c                             |  1 +
 fs/udf/udf_sb.h                            |  2 +-
 include/linux/binfmts.h                    |  2 --
 include/net/inet_frag.h                    |  9 +++++
 include/net/ip_fib.h                       | 12 +++----
 kernel/time/tick-broadcast.c               |  3 +-
 kernel/trace/ftrace.c                      |  4 +--
 kernel/trace/trace.c                       |  3 +-
 mm/hugetlb.c                               |  8 +++--
 net/core/rtnetlink.c                       |  2 +-
 net/ipv4/inet_fragment.c                   | 20 ++++++++++-
 net/ipv4/ip_fragment.c                     | 12 +++----
 net/ipv4/ip_options.c                      |  5 +--
 net/ipv6/netfilter/nf_conntrack_reasm.c    | 12 +++----
 net/ipv6/reassembly.c                      |  8 +++--
 net/sctp/associola.c                       |  2 +-
 security/keys/compat.c                     |  4 +--
 security/keys/keyctl.c                     |  4 +--
 sound/pci/hda/hda_codec.c                  |  2 +-
 sound/usb/mixer.c                          | 16 +++++----
 59 files changed, 354 insertions(+), 269 deletions(-)

[ 01/49] Revert "USB: EHCI: dont check DMA values in QH overlays"

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

This reverts commit 0319f9909ce68a7516dfc8d53400e07168d281a8, which is commit
feca7746d5d9e84b105a613b7f3b6ad00d327372 upstream.

It shouldn't have gone into this stable release.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Joseph Salisbury <joseph.salisbury@canonical.com>
Cc: Stephen Thirlwall <sdt@dr.com>

---
 drivers/usb/host/ehci-q.c |   18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)

--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -137,7 +137,7 @@ qh_refresh (struct ehci_hcd *ehci, struc
 		 * qtd is updated in qh_completions(). Update the QH
 		 * overlay here.
 		 */
-		if (qh->hw->hw_token & ACTIVE_BIT(ehci)) {
+		if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
 			qh->hw->hw_qtd_next = qtd->hw_next;
 			qtd = NULL;
 		}
@@ -450,19 +450,11 @@ qh_completions (struct ehci_hcd *ehci, s
 			else if (last_status == -EINPROGRESS && !urb->unlinked)
 				continue;
 
-			/*
-			 * If this was the active qtd when the qh was unlinked
-			 * and the overlay's token is active, then the overlay
-			 * hasn't been written back to the qtd yet so use its
-			 * token instead of the qtd's.  After the qtd is
-			 * processed and removed, the overlay won't be valid
-			 * any more.
-			 */
-			if (state == QH_STATE_IDLE &&
-					qh->qtd_list.next == &qtd->qtd_list &&
-					(hw->hw_token & ACTIVE_BIT(ehci))) {
+			/* qh unlinked; token in overlay may be most current */
+			if (state == QH_STATE_IDLE
+					&& cpu_to_hc32(ehci, qtd->qtd_dma)
+						== hw->hw_current) {
 				token = hc32_to_cpu(ehci, hw->hw_token);
-				hw->hw_token &= ~ACTIVE_BIT(ehci);
 
 				/* An unlink may leave an incomplete
 				 * async transaction in the TT buffer.

[ 02/49] sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline option

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Tkhai Kirill <tkhai@yandex.ru>

[ Upstream commit cb29529ea0030e60ef1bbbf8399a43d397a51526 ]

If a machine has X (X < 4) sunsu ports and cmdline
option "console=ttySY" is passed, where X < Y <= 4,
than the following panic happens:

Unable to handle kernel NULL pointer dereference
TPC: <sunsu_console_setup+0x78/0xe0>
RPC: <sunsu_console_setup+0x74/0xe0>
I7: <register_console+0x378/0x3e0>
Call Trace:
 [0000000000453a38] register_console+0x378/0x3e0
 [0000000000576fa0] uart_add_one_port+0x2e0/0x340
 [000000000057af40] su_probe+0x160/0x2e0
 [00000000005b8a4c] platform_drv_probe+0xc/0x20
 [00000000005b6c2c] driver_probe_device+0x12c/0x220
 [00000000005b6da8] __driver_attach+0x88/0xa0
 [00000000005b4df4] bus_for_each_dev+0x54/0xa0
 [00000000005b5a54] bus_add_driver+0x154/0x260
 [00000000005b7190] driver_register+0x50/0x180
 [00000000006d250c] sunsu_init+0x18c/0x1e0
 [00000000006c2668] do_one_initcall+0xe8/0x160
 [00000000006c282c] kernel_init_freeable+0x12c/0x1e0
 [0000000000603764] kernel_init+0x4/0x100
 [0000000000405f64] ret_from_syscall+0x1c/0x2c
 [0000000000000000]           (null)

1)Fix the panic;
2)Increment registered port number every successful
probe.

Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/sunsu.c |   21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -968,6 +968,7 @@ static struct uart_ops sunsu_pops = {
 #define UART_NR	4
 
 static struct uart_sunsu_port sunsu_ports[UART_NR];
+static int nr_inst; /* Number of already registered ports */
 
 #ifdef CONFIG_SERIO
 
@@ -1337,13 +1338,8 @@ static int __init sunsu_console_setup(st
 	printk("Console: ttyS%d (SU)\n",
 	       (sunsu_reg.minor - 64) + co->index);
 
-	/*
-	 * Check whether an invalid uart number has been specified, and
-	 * if so, search for the first available port that does have
-	 * console support.
-	 */
-	if (co->index >= UART_NR)
-		co->index = 0;
+	if (co->index > nr_inst)
+		return -ENODEV;
 	port = &sunsu_ports[co->index].port;
 
 	/*
@@ -1408,7 +1404,6 @@ static enum su_type __devinit su_get_typ
 
 static int __devinit su_probe(struct platform_device *op)
 {
-	static int inst;
 	struct device_node *dp = op->dev.of_node;
 	struct uart_sunsu_port *up;
 	struct resource *rp;
@@ -1418,16 +1413,16 @@ static int __devinit su_probe(struct pla
 
 	type = su_get_type(dp);
 	if (type == SU_PORT_PORT) {
-		if (inst >= UART_NR)
+		if (nr_inst >= UART_NR)
 			return -EINVAL;
-		up = &sunsu_ports[inst];
+		up = &sunsu_ports[nr_inst];
 	} else {
 		up = kzalloc(sizeof(*up), GFP_KERNEL);
 		if (!up)
 			return -ENOMEM;
 	}
 
-	up->port.line = inst;
+	up->port.line = nr_inst;
 
 	spin_lock_init(&up->port.lock);
 
@@ -1461,6 +1456,8 @@ static int __devinit su_probe(struct pla
 		}
 		dev_set_drvdata(&op->dev, up);
 
+		nr_inst++;
+
 		return 0;
 	}
 
@@ -1488,7 +1485,7 @@ static int __devinit su_probe(struct pla
 
 	dev_set_drvdata(&op->dev, up);
 
-	inst++;
+	nr_inst++;
 
 	return 0;
 

[ 03/49] net/ipv4: Ensure that location of timestamp option is stored

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: David Ward <david.ward@ll.mit.edu>

[ Upstream commit 4660c7f498c07c43173142ea95145e9dac5a6d14 ]

This is needed in order to detect if the timestamp option appears
more than once in a packet, to remove the option if the packet is
fragmented, etc. My previous change neglected to store the option
location when the router addresses were prespecified and Pointer >
Length. But now the option location is also stored when Flag is an
unrecognized value, to ensure these option handling behaviors are
still performed.

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_options.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/net/ipv4/ip_options.c
+++ b/net/ipv4/ip_options.c
@@ -358,7 +358,6 @@ int ip_options_compile(struct net *net,
 				}
 				switch (optptr[3]&0xF) {
 				      case IPOPT_TS_TSONLY:
-					opt->ts = optptr - iph;
 					if (skb)
 						timeptr = &optptr[optptr[2]-1];
 					opt->ts_needtime = 1;
@@ -369,7 +368,6 @@ int ip_options_compile(struct net *net,
 						pp_ptr = optptr + 2;
 						goto error;
 					}
-					opt->ts = optptr - iph;
 					if (rt)  {
 						memcpy(&optptr[optptr[2]-1], &rt->rt_spec_dst, 4);
 						timeptr = &optptr[optptr[2]+3];
@@ -383,7 +381,6 @@ int ip_options_compile(struct net *net,
 						pp_ptr = optptr + 2;
 						goto error;
 					}
-					opt->ts = optptr - iph;
 					{
 						__be32 addr;
 						memcpy(&addr, &optptr[optptr[2]-1], 4);
@@ -416,12 +413,12 @@ int ip_options_compile(struct net *net,
 					pp_ptr = optptr + 3;
 					goto error;
 				}
-				opt->ts = optptr - iph;
 				if (skb) {
 					optptr[3] = (optptr[3]&0xF)|((overflow+1)<<4);
 					opt->is_changed = 1;
 				}
 			}
+			opt->ts = optptr - iph;
 			break;
 		      case IPOPT_RA:
 			if (optlen < 4) {

[ 04/49] netconsole: dont call __netpoll_cleanup() while atomic

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Veaceslav Falico <vfalico@redhat.com>

[ Upstream commit 3f315bef23075ea8a98a6fe4221a83b83456d970 ]

__netpoll_cleanup() is called in netconsole_netdev_event() while holding a
spinlock. Release/acquire the spinlock before/after it and restart the
loop. Also, disable the netconsole completely, because we won't have chance
after the restart of the loop, and might end up in a situation where
nt->enabled == 1 and nt->np.dev == NULL.

Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/netconsole.c |   20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -630,6 +630,7 @@ static int netconsole_netdev_event(struc
 		goto done;
 
 	spin_lock_irqsave(&target_list_lock, flags);
+restart:
 	list_for_each_entry(nt, &target_list, list) {
 		netconsole_target_get(nt);
 		if (nt->np.dev == dev) {
@@ -642,20 +643,17 @@ static int netconsole_netdev_event(struc
 			case NETDEV_UNREGISTER:
 				/*
 				 * rtnl_lock already held
+				 * we might sleep in __netpoll_cleanup()
 				 */
-				if (nt->np.dev) {
-					spin_unlock_irqrestore(
-							      &target_list_lock,
-							      flags);
-					__netpoll_cleanup(&nt->np);
-					spin_lock_irqsave(&target_list_lock,
-							  flags);
-					dev_put(nt->np.dev);
-					nt->np.dev = NULL;
-				}
+				spin_unlock_irqrestore(&target_list_lock, flags);
+				__netpoll_cleanup(&nt->np);
+				spin_lock_irqsave(&target_list_lock, flags);
+				dev_put(nt->np.dev);
+				nt->np.dev = NULL;
 				nt->enabled = 0;
 				stopped = true;
-				break;
+				netconsole_target_put(nt);
+				goto restart;
 			}
 		}
 		netconsole_target_put(nt);

[ 05/49] sctp: dont break the loop while meeting the active_path so as to find the matched transport

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Xufeng Zhang <xufeng.zhang@windriver.com>

[ Upstream commit 2317f449af30073cfa6ec8352e4a65a89e357bdd ]

sctp_assoc_lookup_tsn() function searchs which transport a certain TSN
was sent on, if not found in the active_path transport, then go search
all the other transports in the peer's transport_addr_list, however, we
should continue to the next entry rather than break the loop when meet
the active_path transport.

Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/associola.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1043,7 +1043,7 @@ struct sctp_transport *sctp_assoc_lookup
 			transports) {
 
 		if (transport == active)
-			break;
+			continue;
 		list_for_each_entry(chunk, &transport->transmitted,
 				transmitted_list) {
 			if (key == chunk->subh.data_hdr->tsn) {

[ 06/49] ipv4: fix definition of FIB_TABLE_HASHSZ

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: "Denis V. Lunev" <den@openvz.org>

[ Upstream commit 5b9e12dbf92b441b37136ea71dac59f05f2673a9 ]

a long time ago by the commit

  commit 93456b6d7753def8760b423ac6b986eb9d5a4a95
  Author: Denis V. Lunev <den@openvz.org>
  Date:   Thu Jan 10 03:23:38 2008 -0800

    [IPV4]: Unify access to the routing tables.

the defenition of FIB_HASH_TABLE size has obtained wrong dependency:
it should depend upon CONFIG_IP_MULTIPLE_TABLES (as was in the original
code) but it was depended from CONFIG_IP_ROUTE_MULTIPATH

This patch returns the situation to the original state.

The problem was spotted by Tingwei Liu.

Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Tingwei Liu <tingw.liu@gmail.com>
CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ip_fib.h |   12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -129,18 +129,16 @@ struct fib_result_nl {
 };
 
 #ifdef CONFIG_IP_ROUTE_MULTIPATH
-
 #define FIB_RES_NH(res)		((res).fi->fib_nh[(res).nh_sel])
-
-#define FIB_TABLE_HASHSZ 2
-
 #else /* CONFIG_IP_ROUTE_MULTIPATH */
-
 #define FIB_RES_NH(res)		((res).fi->fib_nh[0])
+#endif /* CONFIG_IP_ROUTE_MULTIPATH */
 
+#ifdef CONFIG_IP_MULTIPLE_TABLES
 #define FIB_TABLE_HASHSZ 256
-
-#endif /* CONFIG_IP_ROUTE_MULTIPATH */
+#else
+#define FIB_TABLE_HASHSZ 2
+#endif
 
 extern __be32 fib_info_update_nh_saddr(struct net *net, struct fib_nh *nh);
 

[ 07/49] rtnetlink: Mask the rta_type when range checking

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Vlad Yasevich <vyasevic@redhat.com>

[ Upstream commit a5b8db91442fce9c9713fcd656c3698f1adde1d6 ]

Range/validity checks on rta_type in rtnetlink_rcv_msg() do
not account for flags that may be set.  This causes the function
to return -EINVAL when flags are set on the type (for example
NLA_F_NESTED).

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/rtnetlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2011,7 +2011,7 @@ static int rtnetlink_rcv_msg(struct sk_b
 		struct rtattr *attr = (void *)nlh + NLMSG_ALIGN(min_len);
 
 		while (RTA_OK(attr, attrlen)) {
-			unsigned flavor = attr->rta_type;
+			unsigned int flavor = attr->rta_type & NLA_TYPE_MASK;
 			if (flavor) {
 				if (flavor > rta_max[sz_idx])
 					return -EINVAL;

[ 08/49] inet: limit length of fragment queue hash table bucket lists

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Hannes Frederic Sowa <hannes@stressinduktion.org>

[ Upstream commit 5a3da1fe9561828d0ca7eca664b16ec2b9bf0055 ]

This patch introduces a constant limit of the fragment queue hash
table bucket list lengths. Currently the limit 128 is choosen somewhat
arbitrary and just ensures that we can fill up the fragment cache with
empty packets up to the default ip_frag_high_thresh limits. It should
just protect from list iteration eating considerable amounts of cpu.

If we reach the maximum length in one hash bucket a warning is printed.
This is implemented on the caller side of inet_frag_find to distinguish
between the different users of inet_fragment.c.

I dropped the out of memory warning in the ipv4 fragment lookup path,
because we already get a warning by the slab allocator.

Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jesper Dangaard Brouer <jbrouer@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/inet_frag.h                 |    9 +++++++++
 net/ipv4/inet_fragment.c                |   20 +++++++++++++++++++-
 net/ipv4/ip_fragment.c                  |   12 ++++++------
 net/ipv6/netfilter/nf_conntrack_reasm.c |   12 ++++++------
 net/ipv6/reassembly.c                   |    8 ++++++--
 5 files changed, 46 insertions(+), 15 deletions(-)

--- a/include/net/inet_frag.h
+++ b/include/net/inet_frag.h
@@ -33,6 +33,13 @@ struct inet_frag_queue {
 
 #define INETFRAGS_HASHSZ		64
 
+/* averaged:
+ * max_depth = default ipfrag_high_thresh / INETFRAGS_HASHSZ /
+ *	       rounded up (SKB_TRUELEN(0) + sizeof(struct ipq or
+ *	       struct frag_queue))
+ */
+#define INETFRAGS_MAXDEPTH		128
+
 struct inet_frags {
 	struct hlist_head	hash[INETFRAGS_HASHSZ];
 	rwlock_t		lock;
@@ -64,6 +71,8 @@ int inet_frag_evictor(struct netns_frags
 struct inet_frag_queue *inet_frag_find(struct netns_frags *nf,
 		struct inet_frags *f, void *key, unsigned int hash)
 	__releases(&f->lock);
+void inet_frag_maybe_warn_overflow(struct inet_frag_queue *q,
+				   const char *prefix);
 
 static inline void inet_frag_put(struct inet_frag_queue *q, struct inet_frags *f)
 {
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -21,6 +21,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/slab.h>
 
+#include <net/sock.h>
 #include <net/inet_frag.h>
 
 static void inet_frag_secret_rebuild(unsigned long dummy)
@@ -271,6 +272,7 @@ struct inet_frag_queue *inet_frag_find(s
 {
 	struct inet_frag_queue *q;
 	struct hlist_node *n;
+	int depth = 0;
 
 	hlist_for_each_entry(q, n, &f->hash[hash], list) {
 		if (q->net == nf && f->match(q, key)) {
@@ -278,9 +280,25 @@ struct inet_frag_queue *inet_frag_find(s
 			read_unlock(&f->lock);
 			return q;
 		}
+		depth++;
 	}
 	read_unlock(&f->lock);
 
-	return inet_frag_create(nf, f, key);
+	if (depth <= INETFRAGS_MAXDEPTH)
+		return inet_frag_create(nf, f, key);
+	else
+		return ERR_PTR(-ENOBUFS);
 }
 EXPORT_SYMBOL(inet_frag_find);
+
+void inet_frag_maybe_warn_overflow(struct inet_frag_queue *q,
+				   const char *prefix)
+{
+	static const char msg[] = "inet_frag_find: Fragment hash bucket"
+		" list length grew over limit " __stringify(INETFRAGS_MAXDEPTH)
+		". Dropping fragment.\n";
+
+	if (PTR_ERR(q) == -ENOBUFS)
+		LIMIT_NETDEBUG(KERN_WARNING "%s%s", prefix, msg);
+}
+EXPORT_SYMBOL(inet_frag_maybe_warn_overflow);
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -20,6 +20,8 @@
  *		Patrick McHardy :	LRU queue of frag heads for evictor.
  */
 
+#define pr_fmt(fmt) "IPv4: " fmt
+
 #include <linux/compiler.h>
 #include <linux/module.h>
 #include <linux/types.h>
@@ -292,14 +294,12 @@ static inline struct ipq *ip_find(struct
 	hash = ipqhashfn(iph->id, iph->saddr, iph->daddr, iph->protocol);
 
 	q = inet_frag_find(&net->ipv4.frags, &ip4_frags, &arg, hash);
-	if (q == NULL)
-		goto out_nomem;
+	if (IS_ERR_OR_NULL(q)) {
+		inet_frag_maybe_warn_overflow(q, pr_fmt());
+		return NULL;
+	}
 
 	return container_of(q, struct ipq, q);
-
-out_nomem:
-	LIMIT_NETDEBUG(KERN_ERR "ip_frag_create: no memory left !\n");
-	return NULL;
 }
 
 /* Is the fragment too far ahead to be part of ipq? */
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -14,6 +14,8 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#define pr_fmt(fmt) "IPv6-nf: " fmt
+
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/string.h>
@@ -176,14 +178,12 @@ fq_find(__be32 id, u32 user, struct in6_
 
 	q = inet_frag_find(&nf_init_frags, &nf_frags, &arg, hash);
 	local_bh_enable();
-	if (q == NULL)
-		goto oom;
+	if (IS_ERR_OR_NULL(q)) {
+		inet_frag_maybe_warn_overflow(q, pr_fmt());
+		return NULL;
+	}
 
 	return container_of(q, struct nf_ct_frag6_queue, q);
-
-oom:
-	pr_debug("Can't alloc new queue\n");
-	return NULL;
 }
 
 
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -26,6 +26,9 @@
  *	YOSHIFUJI,H. @USAGI	Always remove fragment header to
  *				calculate ICV correctly.
  */
+
+#define pr_fmt(fmt) "IPv6: " fmt
+
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/string.h>
@@ -239,9 +242,10 @@ fq_find(struct net *net, __be32 id, cons
 	hash = inet6_hash_frag(id, src, dst, ip6_frags.rnd);
 
 	q = inet_frag_find(&net->ipv6.frags, &ip6_frags, &arg, hash);
-	if (q == NULL)
+	if (IS_ERR_OR_NULL(q)) {
+		inet_frag_maybe_warn_overflow(q, pr_fmt());
 		return NULL;
-
+	}
 	return container_of(q, struct frag_queue, q);
 }
 

[ 09/49] sfc: Fix loop condition for efx_filter_search() when !for_insert

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commit 4017dbdc14af1903dc9fcba4d08b89c02325069d ]

efx_filter_remove_filter() fails to remove inserted filters in some cases.

For example:

  1. Two filters A and B have specifications that result in an initial
     hash collision.
  2. A is inserted first, followed by B.
  3. An attempt to remove B first succeeds, but if A is removed first
     a subsequent attempt to remove B fails.

When searching for an existing filter (!for_insert),
efx_filter_search() must always continue to the maximum search depth
for the given type rather than stopping at the first unused entry.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/sfc/filter.c |   39 +++++++++++++++++++++++----------------
 1 file changed, 23 insertions(+), 16 deletions(-)

--- a/drivers/net/sfc/filter.c
+++ b/drivers/net/sfc/filter.c
@@ -335,28 +335,35 @@ static int efx_filter_search(struct efx_
 			     bool for_insert, int *depth_required)
 {
 	unsigned hash, incr, filter_idx, depth, depth_max;
-	struct efx_filter_spec *cmp;
 
 	hash = efx_filter_hash(key);
 	incr = efx_filter_increment(key);
-	depth_max = (spec->priority <= EFX_FILTER_PRI_HINT ?
-		     FILTER_CTL_SRCH_HINT_MAX : FILTER_CTL_SRCH_MAX);
 
-	for (depth = 1, filter_idx = hash & (table->size - 1);
-	     depth <= depth_max && test_bit(filter_idx, table->used_bitmap);
-	     ++depth) {
-		cmp = &table->spec[filter_idx];
-		if (efx_filter_equal(spec, cmp))
-			goto found;
+	filter_idx = hash & (table->size - 1);
+	depth = 1;
+	depth_max = (for_insert ?
+		     (spec->priority <= EFX_FILTER_PRI_HINT ?
+		      FILTER_CTL_SRCH_HINT_MAX : FILTER_CTL_SRCH_MAX) :
+		     table->search_depth[spec->type]);
+
+	for (;;) {
+		/* Return success if entry is used and matches this spec
+		 * or entry is unused and we are trying to insert.
+		 */
+		if (test_bit(filter_idx, table->used_bitmap) ?
+		    efx_filter_equal(spec, &table->spec[filter_idx]) :
+		    for_insert) {
+			*depth_required = depth;
+			return filter_idx;
+		}
+
+		/* Return failure if we reached the maximum search depth */
+		if (depth == depth_max)
+			return for_insert ? -EBUSY : -ENOENT;
+
 		filter_idx = (filter_idx + incr) & (table->size - 1);
+		++depth;
 	}
-	if (!for_insert)
-		return -ENOENT;
-	if (depth > depth_max)
-		return -EBUSY;
-found:
-	*depth_required = depth;
-	return filter_idx;
 }
 
 /* Construct/deconstruct external filter IDs */

[ 10/49] sfc: Fix Siena mac statistics on big endian platforms

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Steve Hodgson <shodgson@solarflare.com>

[ Upstream commit a659b2a94d87add999229ecd9f2f56817d5d737b ]

[bwh: Use __force in the one place it's needed]
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/sfc/siena.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -372,14 +372,13 @@ static void siena_remove_nic(struct efx_
 	efx->nic_data = NULL;
 }
 
-#define STATS_GENERATION_INVALID ((u64)(-1))
+#define STATS_GENERATION_INVALID ((__force __le64)(-1))
 
 static int siena_try_update_nic_stats(struct efx_nic *efx)
 {
-	u64 *dma_stats;
+	__le64 *dma_stats;
 	struct efx_mac_stats *mac_stats;
-	u64 generation_start;
-	u64 generation_end;
+	__le64 generation_start, generation_end;
 
 	mac_stats = &efx->mac_stats;
 	dma_stats = (u64 *)efx->stats_buffer.addr;
@@ -390,7 +389,7 @@ static int siena_try_update_nic_stats(st
 	rmb();
 
 #define MAC_STAT(M, D) \
-	mac_stats->M = dma_stats[MC_CMD_MAC_ ## D]
+	mac_stats->M = le64_to_cpu(dma_stats[MC_CMD_MAC_ ## D])
 
 	MAC_STAT(tx_bytes, TX_BYTES);
 	MAC_STAT(tx_bad_bytes, TX_BAD_BYTES);
@@ -460,7 +459,8 @@ static int siena_try_update_nic_stats(st
 	MAC_STAT(rx_internal_error, RX_INTERNAL_ERROR_PKTS);
 	mac_stats->rx_good_lt64 = 0;
 
-	efx->n_rx_nodesc_drop_cnt = dma_stats[MC_CMD_MAC_RX_NODESC_DROPS];
+	efx->n_rx_nodesc_drop_cnt =
+		le64_to_cpu(dma_stats[MC_CMD_MAC_RX_NODESC_DROPS]);
 
 #undef MAC_STAT
 
@@ -489,7 +489,7 @@ static void siena_update_nic_stats(struc
 
 static void siena_start_nic_stats(struct efx_nic *efx)
 {
-	u64 *dma_stats = (u64 *)efx->stats_buffer.addr;
+	__le64 *dma_stats = efx->stats_buffer.addr;
 
 	dma_stats[MC_CMD_MAC_GENERATION_END] = STATS_GENERATION_INVALID;
 

[ 11/49] sfc: Do not attempt to flush queues if DMA is disabled

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Stuart Hodgson <smhodgson@solarflare.com>

[ Upstream commit 3dca9d2dc285faf1910d405b65df845cab061356 ]

efx_nic_fatal_interrupt() disables DMA before scheduling a reset.
After this, we need not and *cannot* flush queues.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/sfc/efx.c |   33 +++++++++++++++++++--------------
 1 file changed, 19 insertions(+), 14 deletions(-)

--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -651,25 +651,30 @@ static void efx_fini_channels(struct efx
 	struct efx_channel *channel;
 	struct efx_tx_queue *tx_queue;
 	struct efx_rx_queue *rx_queue;
+	struct pci_dev *dev = efx->pci_dev;
 	int rc;
 
 	EFX_ASSERT_RESET_SERIALISED(efx);
 	BUG_ON(efx->port_enabled);
 
-	rc = efx_nic_flush_queues(efx);
-	if (rc && EFX_WORKAROUND_7803(efx)) {
-		/* Schedule a reset to recover from the flush failure. The
-		 * descriptor caches reference memory we're about to free,
-		 * but falcon_reconfigure_mac_wrapper() won't reconnect
-		 * the MACs because of the pending reset. */
-		netif_err(efx, drv, efx->net_dev,
-			  "Resetting to recover from flush failure\n");
-		efx_schedule_reset(efx, RESET_TYPE_ALL);
-	} else if (rc) {
-		netif_err(efx, drv, efx->net_dev, "failed to flush queues\n");
-	} else {
-		netif_dbg(efx, drv, efx->net_dev,
-			  "successfully flushed all queues\n");
+	/* Only perform flush if dma is enabled */
+	if (dev->is_busmaster) {
+		rc = efx_nic_flush_queues(efx);
+
+		if (rc && EFX_WORKAROUND_7803(efx)) {
+			/* Schedule a reset to recover from the flush failure. The
+			 * descriptor caches reference memory we're about to free,
+			 * but falcon_reconfigure_mac_wrapper() won't reconnect
+			 * the MACs because of the pending reset. */
+			netif_err(efx, drv, efx->net_dev,
+				  "Resetting to recover from flush failure\n");
+			efx_schedule_reset(efx, RESET_TYPE_ALL);
+		} else if (rc) {
+			netif_err(efx, drv, efx->net_dev, "failed to flush queues\n");
+		} else {
+			netif_dbg(efx, drv, efx->net_dev,
+				  "successfully flushed all queues\n");
+		}
 	}
 
 	efx_for_each_channel(channel, efx) {

[ 12/49] sfc: Convert firmware subtypes to native byte order in efx_mcdi_get_board_cfg()

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commit bfeed902946a31692e7a24ed355b6d13ac37d014 ]

On big-endian systems the MTD partition names currently have mangled
subtype numbers and are not recognised by the firmware update tool
(sfupdate).

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
[bwh: Backported to 3.0: use old macros for length of firmware subtype array]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/sfc/mcdi.c |   17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -666,9 +666,8 @@ int efx_mcdi_get_board_cfg(struct efx_ni
 			   u16 *fw_subtype_list)
 {
 	uint8_t outbuf[MC_CMD_GET_BOARD_CFG_OUT_LEN];
-	size_t outlen;
+	size_t outlen, offset, i;
 	int port_num = efx_port_num(efx);
-	int offset;
 	int rc;
 
 	BUILD_BUG_ON(MC_CMD_GET_BOARD_CFG_IN_LEN != 0);
@@ -688,10 +687,16 @@ int efx_mcdi_get_board_cfg(struct efx_ni
 		: MC_CMD_GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT0_OFST;
 	if (mac_address)
 		memcpy(mac_address, outbuf + offset, ETH_ALEN);
-	if (fw_subtype_list)
-		memcpy(fw_subtype_list,
-		       outbuf + MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_OFST,
-		       MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_LEN);
+	if (fw_subtype_list) {
+		offset = MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_OFST;
+		for (i = 0;
+		     i < MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_LEN / 2;
+		     i++) {
+			fw_subtype_list[i] =
+				le16_to_cpup((__le16 *)(outbuf + offset));
+			offset += 2;
+		}
+	}
 
 	return 0;
 

[ 13/49] sfc: Fix two causes of flush failure

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commits a606f4325dca6950996abbae452d33f2af095f39,
  d5e8cc6c946e0857826dcfbb3585068858445bfe,
  525d9e824018cd7cc8d8d44832ddcd363abfe6e1 ]

The TX DMA engine issues upstream read requests when there is room in
the TX FIFO for the completion. However, the fetches for the rest of
the packet might be delayed by any back pressure.  Since a flush must
wait for an EOP, the entire flush may be delayed by back pressure.

Mitigate this by disabling flow control before the flushes are
started.  Since PF and VF flushes run in parallel introduce
fc_disable, a reference count of the number of flushes outstanding.

The same principle could be applied to Falcon, but that
would bring with it its own testing.

We sometimes hit a "failed to flush" timeout on some TX queues, but the
flushes have completed and the flush completion events seem to go missing.
In this case, we can check the TX_DESC_PTR_TBL register and drain the
queues if the flushes had finished.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
[bwh: Backported to 3.0:
 - Call efx_nic_type::finish_flush() on both success and failure paths
 - Check the TX_DESC_PTR_TBL registers in the polling loop
 - Declare efx_mcdi_set_mac() extern]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/sfc/falcon.c     |    2 ++
 drivers/net/sfc/mcdi.h       |    1 +
 drivers/net/sfc/mcdi_mac.c   |    4 +++-
 drivers/net/sfc/net_driver.h |    6 ++++++
 drivers/net/sfc/nic.c        |   21 ++++++++++++++++++---
 drivers/net/sfc/nic.h        |    2 ++
 drivers/net/sfc/siena.c      |   15 ++++++++++++++-
 7 files changed, 46 insertions(+), 5 deletions(-)

--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -1714,6 +1714,7 @@ const struct efx_nic_type falcon_a1_nic_
 	.remove_port = falcon_remove_port,
 	.handle_global_event = falcon_handle_global_event,
 	.prepare_flush = falcon_prepare_flush,
+	.finish_flush = efx_port_dummy_op_void,
 	.update_stats = falcon_update_nic_stats,
 	.start_stats = falcon_start_nic_stats,
 	.stop_stats = falcon_stop_nic_stats,
@@ -1755,6 +1756,7 @@ const struct efx_nic_type falcon_b0_nic_
 	.remove_port = falcon_remove_port,
 	.handle_global_event = falcon_handle_global_event,
 	.prepare_flush = falcon_prepare_flush,
+	.finish_flush = efx_port_dummy_op_void,
 	.update_stats = falcon_update_nic_stats,
 	.start_stats = falcon_start_nic_stats,
 	.stop_stats = falcon_stop_nic_stats,
--- a/drivers/net/sfc/mcdi.h
+++ b/drivers/net/sfc/mcdi.h
@@ -126,5 +126,6 @@ extern int efx_mcdi_wol_filter_set_magic
 extern int efx_mcdi_wol_filter_get_magic(struct efx_nic *efx, int *id_out);
 extern int efx_mcdi_wol_filter_remove(struct efx_nic *efx, int id);
 extern int efx_mcdi_wol_filter_reset(struct efx_nic *efx);
+extern int efx_mcdi_set_mac(struct efx_nic *efx);
 
 #endif /* EFX_MCDI_H */
--- a/drivers/net/sfc/mcdi_mac.c
+++ b/drivers/net/sfc/mcdi_mac.c
@@ -13,7 +13,7 @@
 #include "mcdi.h"
 #include "mcdi_pcol.h"
 
-static int efx_mcdi_set_mac(struct efx_nic *efx)
+int efx_mcdi_set_mac(struct efx_nic *efx)
 {
 	u32 reject, fcntl;
 	u8 cmdbytes[MC_CMD_SET_MAC_IN_LEN];
@@ -45,6 +45,8 @@ static int efx_mcdi_set_mac(struct efx_n
 	}
 	if (efx->wanted_fc & EFX_FC_AUTO)
 		fcntl = MC_CMD_FCNTL_AUTO;
+	if (efx->fc_disable)
+		fcntl = MC_CMD_FCNTL_OFF;
 
 	MCDI_SET_DWORD(cmdbytes, SET_MAC_IN_FCNTL, fcntl);
 
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -690,6 +690,9 @@ struct efx_filter_state;
  * @promiscuous: Promiscuous flag. Protected by netif_tx_lock.
  * @multicast_hash: Multicast hash table
  * @wanted_fc: Wanted flow control flags
+ * @fc_disable: When non-zero flow control is disabled. Typically used to
+ *	ensure that network back pressure doesn't delay dma queue flushes.
+ *	Serialised by the rtnl lock.
  * @mac_work: Work item for changing MAC promiscuity and multicast hash
  * @loopback_mode: Loopback status
  * @loopback_modes: Supported loopback mode bitmask
@@ -783,6 +786,7 @@ struct efx_nic {
 	bool promiscuous;
 	union efx_multicast_hash multicast_hash;
 	u8 wanted_fc;
+	unsigned fc_disable;
 
 	atomic_t rx_reset;
 	enum efx_loopback_mode loopback_mode;
@@ -834,6 +838,7 @@ static inline unsigned int efx_port_num(
  * @remove_port: Free resources allocated by probe_port()
  * @handle_global_event: Handle a "global" event (may be %NULL)
  * @prepare_flush: Prepare the hardware for flushing the DMA queues
+ * @finish_flush: Clean up after flushing the DMA queues
  * @update_stats: Update statistics not provided by event handling
  * @start_stats: Start the regular fetching of statistics
  * @stop_stats: Stop the regular fetching of statistics
@@ -879,6 +884,7 @@ struct efx_nic_type {
 	void (*remove_port)(struct efx_nic *efx);
 	bool (*handle_global_event)(struct efx_channel *channel, efx_qword_t *);
 	void (*prepare_flush)(struct efx_nic *efx);
+	void (*finish_flush)(struct efx_nic *efx);
 	void (*update_stats)(struct efx_nic *efx);
 	void (*start_stats)(struct efx_nic *efx);
 	void (*stop_stats)(struct efx_nic *efx);
--- a/drivers/net/sfc/nic.c
+++ b/drivers/net/sfc/nic.c
@@ -1260,13 +1260,27 @@ int efx_nic_flush_queues(struct efx_nic
 			}
 			efx_for_each_possible_channel_tx_queue(tx_queue, channel) {
 				if (tx_queue->initialised &&
-				    tx_queue->flushed != FLUSH_DONE)
-					++tx_pending;
+				    tx_queue->flushed != FLUSH_DONE) {
+					efx_oword_t txd_ptr_tbl;
+
+					efx_reado_table(efx, &txd_ptr_tbl,
+							FR_BZ_TX_DESC_PTR_TBL,
+							tx_queue->queue);
+					if (EFX_OWORD_FIELD(txd_ptr_tbl,
+							    FRF_AZ_TX_DESCQ_FLUSH) ||
+					    EFX_OWORD_FIELD(txd_ptr_tbl,
+							    FRF_AZ_TX_DESCQ_EN))
+						++tx_pending;
+					else
+						tx_queue->flushed = FLUSH_DONE;
+				}
 			}
 		}
 
-		if (rx_pending == 0 && tx_pending == 0)
+		if (rx_pending == 0 && tx_pending == 0) {
+			efx->type->finish_flush(efx);
 			return 0;
+		}
 
 		msleep(EFX_FLUSH_INTERVAL);
 		efx_poll_flush_events(efx);
@@ -1292,6 +1306,7 @@ int efx_nic_flush_queues(struct efx_nic
 		}
 	}
 
+	efx->type->finish_flush(efx);
 	return -ETIMEDOUT;
 }
 
--- a/drivers/net/sfc/nic.h
+++ b/drivers/net/sfc/nic.h
@@ -211,6 +211,8 @@ extern void falcon_irq_ack_a1(struct efx
 
 /* Global Resources */
 extern int efx_nic_flush_queues(struct efx_nic *efx);
+extern void siena_prepare_flush(struct efx_nic *efx);
+extern void siena_finish_flush(struct efx_nic *efx);
 extern void falcon_start_nic_stats(struct efx_nic *efx);
 extern void falcon_stop_nic_stats(struct efx_nic *efx);
 extern void falcon_setup_xaui(struct efx_nic *efx);
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -135,6 +135,18 @@ static void siena_remove_port(struct efx
 	efx_nic_free_buffer(efx, &efx->stats_buffer);
 }
 
+void siena_prepare_flush(struct efx_nic *efx)
+{
+	if (efx->fc_disable++ == 0)
+		efx_mcdi_set_mac(efx);
+}
+
+void siena_finish_flush(struct efx_nic *efx)
+{
+	if (--efx->fc_disable == 0)
+		efx_mcdi_set_mac(efx);
+}
+
 static const struct efx_nic_register_test siena_register_tests[] = {
 	{ FR_AZ_ADR_REGION,
 	  EFX_OWORD32(0x0003FFFF, 0x0003FFFF, 0x0003FFFF, 0x0003FFFF) },
@@ -590,7 +602,8 @@ const struct efx_nic_type siena_a0_nic_t
 	.reset = siena_reset_hw,
 	.probe_port = siena_probe_port,
 	.remove_port = siena_remove_port,
-	.prepare_flush = efx_port_dummy_op_void,
+	.prepare_flush = siena_prepare_flush,
+	.finish_flush = siena_finish_flush,
 	.update_stats = siena_update_nic_stats,
 	.start_stats = siena_start_nic_stats,
 	.stop_stats = siena_stop_nic_stats,

[ 14/49] sfc: lock TX queues when calling netif_device_detach()

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Daniel Pieczko <dpieczko@solarflare.com>

[ Upstream commit c2f3b8e3a44b6fe9e36704e30157ebe1a88c08b1 ]

The assertion of netif_device_present() at the top of
efx_hard_start_xmit() may fail if we don't do this.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
[bwh: Backported to 3.0: adjust context]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/sfc/efx.c      |    4 ++--
 drivers/net/sfc/efx.h      |   13 +++++++++++++
 drivers/net/sfc/selftest.c |    2 +-
 3 files changed, 16 insertions(+), 3 deletions(-)

--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -2106,7 +2106,7 @@ int efx_reset(struct efx_nic *efx, enum
 	netif_info(efx, drv, efx->net_dev, "resetting (%s)\n",
 		   RESET_TYPE(method));
 
-	netif_device_detach(efx->net_dev);
+	efx_device_detach_sync(efx);
 	efx_reset_down(efx, method);
 
 	rc = efx->type->reset(efx, method);
@@ -2565,7 +2565,7 @@ static int efx_pm_freeze(struct device *
 
 	efx->state = STATE_FINI;
 
-	netif_device_detach(efx->net_dev);
+	efx_device_detach_sync(efx);
 
 	efx_stop_all(efx);
 	efx_fini_channels(efx);
--- a/drivers/net/sfc/efx.h
+++ b/drivers/net/sfc/efx.h
@@ -150,4 +150,17 @@ extern void efx_link_status_changed(stru
 extern void efx_link_set_advertising(struct efx_nic *efx, u32);
 extern void efx_link_set_wanted_fc(struct efx_nic *efx, u8);
 
+static inline void efx_device_detach_sync(struct efx_nic *efx)
+{
+	struct net_device *dev = efx->net_dev;
+
+	/* Lock/freeze all TX queues so that we can be sure the
+	 * TX scheduler is stopped when we're done and before
+	 * netif_device_present() becomes false.
+	 */
+	netif_tx_lock(dev);
+	netif_device_detach(dev);
+	netif_tx_unlock(dev);
+}
+
 #endif /* EFX_EFX_H */
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -698,7 +698,7 @@ int efx_selftest(struct efx_nic *efx, st
 	/* Detach the device so the kernel doesn't transmit during the
 	 * loopback test and the watchdog timeout doesn't fire.
 	 */
-	netif_device_detach(efx->net_dev);
+	efx_device_detach_sync(efx);
 
 	mutex_lock(&efx->mac_lock);
 	if (efx->loopback_modes) {

[ 15/49] sfc: Fix timekeeping in efx_mcdi_poll()

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commit ebf98e797b4e26ad52ace1511a0b503ee60a6cd4 ]

efx_mcdi_poll() uses get_seconds() to read the current time and to
implement a polling timeout.  The use of this function was chosen
partly because it could easily be replaced in a co-sim environment
with a macro that read the simulated time.

Unfortunately the real get_seconds() returns the system time (real
time) which is subject to adjustment by e.g. ntpd.  If the system time
is adjusted forward during a polled MCDI operation, the effective
timeout can be shorter than the intended 10 seconds, resulting in a
spurious failure.  It is also possible for a backward adjustment to
delay detection of a areal failure.

Use jiffies instead, and change MCDI_RPC_TIMEOUT to be denominated in
jiffies.  Also correct rounding of the timeout: check time > finish
(or rather time_after(time, finish)) and not time >= finish.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
[bwh: Backported to 3.0: adjust context]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/sfc/mcdi.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -30,7 +30,7 @@
 #define REBOOT_FLAG_PORT0 0x3f8
 #define REBOOT_FLAG_PORT1 0x3fc
 
-#define MCDI_RPC_TIMEOUT       10 /*seconds */
+#define MCDI_RPC_TIMEOUT       (10 * HZ)
 
 #define MCDI_PDU(efx)							\
 	(efx_port_num(efx) ? CMD_PDU_PORT1 : CMD_PDU_PORT0)
@@ -120,7 +120,7 @@ static void efx_mcdi_copyout(struct efx_
 static int efx_mcdi_poll(struct efx_nic *efx)
 {
 	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
-	unsigned int time, finish;
+	unsigned long time, finish;
 	unsigned int respseq, respcmd, error;
 	unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
 	unsigned int rc, spins;
@@ -136,7 +136,7 @@ static int efx_mcdi_poll(struct efx_nic
 	 * and poll once a jiffy (approximately)
 	 */
 	spins = TICK_USEC;
-	finish = get_seconds() + MCDI_RPC_TIMEOUT;
+	finish = jiffies + MCDI_RPC_TIMEOUT;
 
 	while (1) {
 		if (spins != 0) {
@@ -146,7 +146,7 @@ static int efx_mcdi_poll(struct efx_nic
 			schedule_timeout_uninterruptible(1);
 		}
 
-		time = get_seconds();
+		time = jiffies;
 
 		rmb();
 		efx_readd(efx, &reg, pdu);
@@ -158,7 +158,7 @@ static int efx_mcdi_poll(struct efx_nic
 		    EFX_DWORD_FIELD(reg, MCDI_HEADER_RESPONSE))
 			break;
 
-		if (time >= finish)
+		if (time_after(time, finish))
 			return -ETIMEDOUT;
 	}
 
@@ -250,7 +250,7 @@ static int efx_mcdi_await_completion(str
 	if (wait_event_timeout(
 		    mcdi->wq,
 		    atomic_read(&mcdi->state) == MCDI_STATE_COMPLETED,
-		    msecs_to_jiffies(MCDI_RPC_TIMEOUT * 1000)) == 0)
+		    MCDI_RPC_TIMEOUT) == 0)
 		return -ETIMEDOUT;
 
 	/* Check if efx_mcdi_set_mode() switched us back to polled completions.

[ 16/49] sfc: Properly sync RX DMA buffer when it is not the last in the page

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commit 3a68f19d7afb80f548d016effbc6ed52643a8085 ]

We may currently allocate two RX DMA buffers to a page, and only unmap
the page when the second is completed.  We do not sync the first RX
buffer to be completed; this can result in packet loss or corruption
if the last RX buffer completed in a NAPI poll is the first in a page
and is not DMA-coherent.  (In the middle of a NAPI poll, we will
handle the following RX completion and unmap the page *before* looking
at the content of the first buffer.)

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
[bwh: Backported to 3.0: adjust context]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/sfc/rx.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -245,7 +245,8 @@ static int efx_init_rx_buffers_page(stru
 }
 
 static void efx_unmap_rx_buffer(struct efx_nic *efx,
-				struct efx_rx_buffer *rx_buf)
+				struct efx_rx_buffer *rx_buf,
+				unsigned int used_len)
 {
 	if (rx_buf->is_page && rx_buf->u.page) {
 		struct efx_rx_page_state *state;
@@ -256,6 +257,10 @@ static void efx_unmap_rx_buffer(struct e
 				       state->dma_addr,
 				       efx_rx_buf_size(efx),
 				       PCI_DMA_FROMDEVICE);
+		} else if (used_len) {
+			dma_sync_single_for_cpu(&efx->pci_dev->dev,
+						rx_buf->dma_addr, used_len,
+						DMA_FROM_DEVICE);
 		}
 	} else if (!rx_buf->is_page && rx_buf->u.skb) {
 		pci_unmap_single(efx->pci_dev, rx_buf->dma_addr,
@@ -278,7 +283,7 @@ static void efx_free_rx_buffer(struct ef
 static void efx_fini_rx_buffer(struct efx_rx_queue *rx_queue,
 			       struct efx_rx_buffer *rx_buf)
 {
-	efx_unmap_rx_buffer(rx_queue->efx, rx_buf);
+	efx_unmap_rx_buffer(rx_queue->efx, rx_buf, 0);
 	efx_free_rx_buffer(rx_queue->efx, rx_buf);
 }
 
@@ -549,10 +554,10 @@ void efx_rx_packet(struct efx_rx_queue *
 		goto out;
 	}
 
-	/* Release card resources - assumes all RX buffers consumed in-order
-	 * per RX queue
+	/* Release and/or sync DMA mapping - assumes all RX buffers
+	 * consumed in-order per RX queue
 	 */
-	efx_unmap_rx_buffer(efx, rx_buf);
+	efx_unmap_rx_buffer(efx, rx_buf, len);
 
 	/* Prefetch nice and early so data will (hopefully) be in cache by
 	 * the time we look at it.

[ 17/49] sfc: Fix efx_rx_buf_offset() in the presence of swiotlb

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commits 06e63c57acbb1df7c35ebe846ae416a8b88dfafa,
  b590ace09d51cd39744e0f7662c5e4a0d1b5d952 and
  c73e787a8db9117d59b5180baf83203a42ecadca ]

We assume that the mapping between DMA and virtual addresses is done
on whole pages, so we can find the page offset of an RX buffer using
the lower bits of the DMA address.  However, swiotlb maps in units of
2K, breaking this assumption.

Add an explicit page_offset field to struct efx_rx_buffer.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
[bwh: Backported to 3.0: adjust context]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/sfc/net_driver.h |    4 +++-
 drivers/net/sfc/rx.c         |   10 +++++-----
 2 files changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -214,6 +214,7 @@ struct efx_tx_queue {
  *	If both this and page are %NULL, the buffer slot is currently free.
  * @page: The associated page buffer, if any.
  *	If both this and skb are %NULL, the buffer slot is currently free.
+ * @page_offset: Offset within page. Valid iff @flags & %EFX_RX_BUF_PAGE.
  * @len: Buffer length, in bytes.
  * @is_page: Indicates if @page is valid. If false, @skb is valid.
  */
@@ -223,7 +224,8 @@ struct efx_rx_buffer {
 		struct sk_buff *skb;
 		struct page *page;
 	} u;
-	unsigned int len;
+	u16 page_offset;
+	u16 len;
 	bool is_page;
 };
 
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -94,11 +94,7 @@ static unsigned int rx_refill_limit = 95
 static inline unsigned int efx_rx_buf_offset(struct efx_nic *efx,
 					     struct efx_rx_buffer *buf)
 {
-	/* Offset is always within one page, so we don't need to consider
-	 * the page order.
-	 */
-	return (((__force unsigned long) buf->dma_addr & (PAGE_SIZE - 1)) +
-		efx->type->rx_buffer_hash_size);
+	return buf->page_offset + efx->type->rx_buffer_hash_size;
 }
 static inline unsigned int efx_rx_buf_size(struct efx_nic *efx)
 {
@@ -193,6 +189,7 @@ static int efx_init_rx_buffers_page(stru
 	struct efx_rx_buffer *rx_buf;
 	struct page *page;
 	void *page_addr;
+	unsigned int page_offset;
 	struct efx_rx_page_state *state;
 	dma_addr_t dma_addr;
 	unsigned index, count;
@@ -219,12 +216,14 @@ static int efx_init_rx_buffers_page(stru
 
 		page_addr += sizeof(struct efx_rx_page_state);
 		dma_addr += sizeof(struct efx_rx_page_state);
+		page_offset = sizeof(struct efx_rx_page_state);
 
 	split:
 		index = rx_queue->added_count & rx_queue->ptr_mask;
 		rx_buf = efx_rx_buffer(rx_queue, index);
 		rx_buf->dma_addr = dma_addr + EFX_PAGE_IP_ALIGN;
 		rx_buf->u.page = page;
+		rx_buf->page_offset = page_offset + EFX_PAGE_IP_ALIGN;
 		rx_buf->len = efx->rx_buffer_len - EFX_PAGE_IP_ALIGN;
 		rx_buf->is_page = true;
 		++rx_queue->added_count;
@@ -236,6 +235,7 @@ static int efx_init_rx_buffers_page(stru
 			get_page(page);
 			dma_addr += (PAGE_SIZE >> 1);
 			page_addr += (PAGE_SIZE >> 1);
+			page_offset += (PAGE_SIZE >> 1);
 			++count;
 			goto split;
 		}

[ 18/49] sfc: Detach net device when stopping queues for reconfiguration

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commit 29c69a4882641285a854d6d03ca5adbba68c0034 ]

We must only ever stop TX queues when they are full or the net device
is not 'ready' so far as the net core, and specifically the watchdog,
is concerned.  Otherwise, the watchdog may fire *immediately* if no
packets have been added to the queue in the last 5 seconds.

The device is ready if all the following are true:

(a) It has a qdisc
(b) It is marked present
(c) It is running
(d) The link is reported up

(a) and (c) are normally true, and must not be changed by a driver.
(d) is under our control, but fake link changes may disturb userland.
This leaves (b).  We already mark the device absent during reset
and self-test, but we need to do the same during MTU changes and ring
reallocation.  We don't need to do this when the device is brought
down because then (c) is already false.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
[bwh: Backported to 3.0: adjust context]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/sfc/efx.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -720,6 +720,7 @@ efx_realloc_channels(struct efx_nic *efx
 	unsigned i;
 	int rc;
 
+	efx_device_detach_sync(efx);
 	efx_stop_all(efx);
 	efx_fini_channels(efx);
 
@@ -763,6 +764,7 @@ out:
 
 	efx_init_channels(efx);
 	efx_start_all(efx);
+	netif_device_attach(efx->net_dev);
 	return rc;
 
 rollback:
@@ -1530,8 +1532,12 @@ static void efx_stop_all(struct efx_nic
 	/* Flush efx_mac_work(), refill_workqueue, monitor_work */
 	efx_flush_all(efx);
 
-	/* Stop the kernel transmit interface late, so the watchdog
-	 * timer isn't ticking over the flush */
+	/* Stop the kernel transmit interface.  This is only valid if
+	 * the device is stopped or detached; otherwise the watchdog
+	 * may fire immediately.
+	 */
+	WARN_ON(netif_running(efx->net_dev) &&
+		netif_device_present(efx->net_dev));
 	if (efx_dev_registered(efx)) {
 		netif_tx_stop_all_queues(efx->net_dev);
 		netif_tx_lock_bh(efx->net_dev);
@@ -1801,10 +1807,11 @@ static int efx_change_mtu(struct net_dev
 	if (new_mtu > EFX_MAX_MTU)
 		return -EINVAL;
 
-	efx_stop_all(efx);
-
 	netif_dbg(efx, drv, efx->net_dev, "changing MTU to %d\n", new_mtu);
 
+	efx_device_detach_sync(efx);
+	efx_stop_all(efx);
+
 	efx_fini_channels(efx);
 
 	mutex_lock(&efx->mac_lock);
@@ -1817,6 +1824,7 @@ static int efx_change_mtu(struct net_dev
 	efx_init_channels(efx);
 
 	efx_start_all(efx);
+	netif_device_attach(efx->net_dev);
 	return rc;
 }
 

[ 19/49] sfc: Disable soft interrupt handling during efx_device_detach_sync()

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commit 35205b211c8d17a8a0b5e8926cb7c73e9a7ef1ad ]

efx_device_detach_sync() locks all TX queues before marking the device
detached and thus disabling further TX scheduling.  But it can still
be interrupted by TX completions which then result in TX scheduling in
soft interrupt context.  This will deadlock when it tries to acquire
a TX queue lock that efx_device_detach_sync() already acquired.

To avoid deadlock, we must use netif_tx_{,un}lock_bh().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/sfc/efx.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/sfc/efx.h
+++ b/drivers/net/sfc/efx.h
@@ -158,9 +158,9 @@ static inline void efx_device_detach_syn
 	 * TX scheduler is stopped when we're done and before
 	 * netif_device_present() becomes false.
 	 */
-	netif_tx_lock(dev);
+	netif_tx_lock_bh(dev);
 	netif_device_detach(dev);
-	netif_tx_unlock(dev);
+	netif_tx_unlock_bh(dev);
 }
 
 #endif /* EFX_EFX_H */

[ 20/49] sfc: Only use TX push if a single descriptor is to be written

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Ben Hutchings <bhutchings@solarflare.com>

[ Upstream commit fae8563b25f73dc584a07bcda7a82750ff4f7672 ]

Using TX push when notifying the NIC of multiple new descriptors in
the ring will very occasionally cause the TX DMA engine to re-use an
old descriptor.  This can result in a duplicated or partly duplicated
packet (new headers with old data), or an IOMMU page fault.  This does
not happen when the pushed descriptor is the only one written.

TX push also provides little latency benefit when a packet requires
more than one descriptor.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/sfc/nic.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/sfc/nic.c
+++ b/drivers/net/sfc/nic.c
@@ -370,7 +370,8 @@ efx_may_push_tx_desc(struct efx_tx_queue
 		return false;
 
 	tx_queue->empty_read_count = 0;
-	return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0;
+	return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0
+		&& tx_queue->write_count - write_count == 1;
 }
 
 /* For each entry inserted into the software descriptor ring, create a

[ 21/49] ALSA: hda - Fix typo in checking IEC958 emphasis bit

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit a686fd141e20244ad75f80ad54706da07d7bb90a upstream.

There is a typo in convert_to_spdif_status() about checking the
emphasis IEC958 status bit.  It should check the given value instead
of the resultant value.

Reported-by: Martin Weishart <martin.weishart@telosalliance.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_codec.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -2625,7 +2625,7 @@ static unsigned int convert_to_spdif_sta
 	if (val & AC_DIG1_PROFESSIONAL)
 		sbits |= IEC958_AES0_PROFESSIONAL;
 	if (sbits & IEC958_AES0_PROFESSIONAL) {
-		if (sbits & AC_DIG1_EMPHASIS)
+		if (val & AC_DIG1_EMPHASIS)
 			sbits |= IEC958_AES0_PRO_EMPHASIS_5015;
 	} else {
 		if (val & AC_DIG1_EMPHASIS)

[ 22/49] ALSA: snd-usb: mixer: propagate errors up the call chain

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Mack <zonque@gmail.com>

commit 4d7b86c98e445b075c2c4c3757eb6d3d6efbe72e upstream.

In check_input_term() and parse_audio_feature_unit(), propagate the
error value that has been returned by a failing function instead of
-EINVAL. That helps cleaning up the error pathes in the mixer.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/mixer.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -711,8 +711,9 @@ static int check_input_term(struct mixer
 		case UAC2_CLOCK_SELECTOR: {
 			struct uac_selector_unit_descriptor *d = p1;
 			/* call recursively to retrieve the channel info */
-			if (check_input_term(state, d->baSourceID[0], term) < 0)
-				return -ENODEV;
+			err = check_input_term(state, d->baSourceID[0], term);
+			if (err < 0)
+				return err;
 			term->type = d->bDescriptorSubtype << 16; /* virtual type */
 			term->id = id;
 			term->name = uac_selector_unit_iSelector(d);
@@ -1262,8 +1263,9 @@ static int parse_audio_feature_unit(stru
 		return err;
 
 	/* determine the input source type and name */
-	if (check_input_term(state, hdr->bSourceID, &iterm) < 0)
-		return -EINVAL;
+	err = check_input_term(state, hdr->bSourceID, &iterm);
+	if (err < 0)
+		return err;
 
 	master_bits = snd_usb_combine_bytes(bmaControls, csize);
 	/* master configuration quirks */

[ 23/49] ALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls()

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Mack <zonque@gmail.com>

commit 83ea5d18d74f032a760fecde78c0210f66f7f70c upstream.

Creation of individual mixer controls may fail, but that shouldn't cause
the entire mixer creation to fail. Even worse, if the mixer creation
fails, that will error out the entire device probing.

All the functions called by parse_audio_unit() should return -EINVAL if
they find descriptors that are unsupported or believed to be malformed,
so we can safely handle this error code as a non-fatal condition in
snd_usb_mixer_controls().

That fixes a long standing bug which is commonly worked around by
adding quirks which make the driver ignore entire interfaces. Some of
them might now be unnecessary.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-and-tested-by: Rodolfo Thomazelli <pe.soberbo@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/mixer.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -2026,7 +2026,7 @@ static int snd_usb_mixer_controls(struct
 			state.oterm.type = le16_to_cpu(desc->wTerminalType);
 			state.oterm.name = desc->iTerminal;
 			err = parse_audio_unit(&state, desc->bSourceID);
-			if (err < 0)
+			if (err < 0 && err != -EINVAL)
 				return err;
 		} else { /* UAC_VERSION_2 */
 			struct uac2_output_terminal_descriptor *desc = p;
@@ -2038,12 +2038,12 @@ static int snd_usb_mixer_controls(struct
 			state.oterm.type = le16_to_cpu(desc->wTerminalType);
 			state.oterm.name = desc->iTerminal;
 			err = parse_audio_unit(&state, desc->bSourceID);
-			if (err < 0)
+			if (err < 0 && err != -EINVAL)
 				return err;
 
 			/* for UAC2, use the same approach to also add the clock selectors */
 			err = parse_audio_unit(&state, desc->bCSourceID);
-			if (err < 0)
+			if (err < 0 && err != -EINVAL)
 				return err;
 		}
 	}

[ 24/49] drm/i915: restrict kernel address leak in debugfs

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 2563a4524febe8f4a98e717e02436d1aaf672aa2 upstream.

Masks kernel address info-leak in object dumps with the %pK suffix,
so they cannot be used to target kernel memory corruption attacks if
the kptr_restrict sysctl is set.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_debugfs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -119,7 +119,7 @@ static const char *cache_level_str(int t
 static void
 describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
 {
-	seq_printf(m, "%p: %s%s %8zd %04x %04x %d %d%s%s%s",
+	seq_printf(m, "%pK: %s%s %8zd %04x %04x %d %d%s%s%s",
 		   &obj->base,
 		   get_pin_flag(obj),
 		   get_tiling_flag(obj),

[ 25/49] tracing: Fix race in snapshot swapping

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

commit 2721e72dd10f71a3ba90f59781becf02638aa0d9 upstream.

Although the swap is wrapped with a spin_lock, the assignment
of the temp buffer used to swap is not within that lock.
It needs to be moved into that lock, otherwise two swaps
happening on two different CPUs, can end up using the wrong
temp buffer to assign in the swap.

Luckily, all current callers of the swap function appear to have
their own locks. But in case something is added that allows two
different callers to call the swap, then there's a chance that
this race can trigger and corrupt the buffers.

New code is coming soon that will allow for this race to trigger.

I've Cc'd stable, so this bug will not show up if someone backports
one of the changes that can trigger this bug.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -649,7 +649,7 @@ __update_max_tr(struct trace_array *tr,
 void
 update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu)
 {
-	struct ring_buffer *buf = tr->buffer;
+	struct ring_buffer *buf;
 
 	if (trace_stop_count)
 		return;
@@ -661,6 +661,7 @@ update_max_tr(struct trace_array *tr, st
 	}
 	arch_spin_lock(&ftrace_max_lock);
 
+	buf = tr->buffer;
 	tr->buffer = max_tr.buffer;
 	max_tr.buffer = buf;
 

[ 26/49] tracing: Fix free of probe entry by calling call_rcu_sched()

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

commit 740466bc89ad8bd5afcc8de220f715f62b21e365 upstream.

Because function tracing is very invasive, and can even trace
calls to rcu_read_lock(), RCU access in function tracing is done
with preempt_disable_notrace(). This requires a synchronize_sched()
for updates and not a synchronize_rcu().

Function probes (traceon, traceoff, etc) must be freed after
a synchronize_sched() after its entry has been removed from the
hash. But call_rcu() is used. Fix this by using call_rcu_sched().

Also fix the usage to use hlist_del_rcu() instead of hlist_del().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ftrace.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -2709,8 +2709,8 @@ __unregister_ftrace_function_probe(char
 					continue;
 			}
 
-			hlist_del(&entry->node);
-			call_rcu(&entry->rcu, ftrace_free_entry_rcu);
+			hlist_del_rcu(&entry->node);
+			call_rcu_sched(&entry->rcu, ftrace_free_entry_rcu);
 		}
 	}
 	__disable_ftrace_function_probe();

[ 27/49] mwifiex: fix potential out-of-boundary access to ibss rate table

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bing Zhao <bzhao@marvell.com>

commit 5f0fabf84d7b52f979dcbafa3d3c530c60d9a92c upstream.

smatch found this error:

CHECK   drivers/net/wireless/mwifiex/join.c
  drivers/net/wireless/mwifiex/join.c:1121
  mwifiex_cmd_802_11_ad_hoc_join()
  error: testing array offset 'i' after use.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/mwifiex/join.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -1102,10 +1102,9 @@ mwifiex_cmd_802_11_ad_hoc_join(struct mw
 				adhoc_join->bss_descriptor.bssid,
 				adhoc_join->bss_descriptor.ssid);
 
-	for (i = 0; bss_desc->supported_rates[i] &&
-			i < MWIFIEX_SUPPORTED_RATES;
-			i++)
-			;
+	for (i = 0; i < MWIFIEX_SUPPORTED_RATES &&
+		    bss_desc->supported_rates[i]; i++)
+		;
 	rates_size = i;
 
 	/* Copy Data Rates from the Rates recorded in scan response */

[ 28/49] drm/i915: bounds check execbuffer relocation count

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 3118a4f652c7b12c752f3222af0447008f9b2368 upstream.

It is possible to wrap the counter used to allocate the buffer for
relocation copies. This could lead to heap writing overflows.

CVE-2013-0913

v3: collapse test, improve comment
v2: move check into validate_exec_list

Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Pinkie Pie
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_gem_execbuffer.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -888,15 +888,20 @@ validate_exec_list(struct drm_i915_gem_e
 		   int count)
 {
 	int i;
+	int relocs_total = 0;
+	int relocs_max = INT_MAX / sizeof(struct drm_i915_gem_relocation_entry);
 
 	for (i = 0; i < count; i++) {
 		char __user *ptr = (char __user *)(uintptr_t)exec[i].relocs_ptr;
 		int length; /* limited by fault_in_pages_readable() */
 
-		/* First check for malicious input causing overflow */
-		if (exec[i].relocation_count >
-		    INT_MAX / sizeof(struct drm_i915_gem_relocation_entry))
+		/* First check for malicious input causing overflow in
+		 * the worst case where we need to allocate the entire
+		 * relocation tree as a single array.
+		 */
+		if (exec[i].relocation_count > relocs_max - relocs_total)
 			return -EINVAL;
+		relocs_total += exec[i].relocation_count;
 
 		length = exec[i].relocation_count *
 			sizeof(struct drm_i915_gem_relocation_entry);

[ 29/49] KMS: fix EDID detailed timing vsync parsing

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Torsten Duwe <torsten@lst.de>

commit 16dad1d743d31a104a849c8944e6b9eb479f6cd7 upstream.

EDID spreads some values across multiple bytes; bit-fiddling is needed
to retrieve these.  The current code to parse "detailed timings" has a
cut&paste error that results in a vsync offset of at most 15 lines
instead of 63.

See

   http://en.wikipedia.org/wiki/EDID

and in the "EDID Detailed Timing Descriptor" see bytes 10+11 show why
that needs to be a left shift.

Signed-off-by: Torsten Duwe <duwe@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/drm_edid.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -841,7 +841,7 @@ static struct drm_display_mode *drm_mode
 	unsigned vblank = (pt->vactive_vblank_hi & 0xf) << 8 | pt->vblank_lo;
 	unsigned hsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc0) << 2 | pt->hsync_offset_lo;
 	unsigned hsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x30) << 4 | pt->hsync_pulse_width_lo;
-	unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) >> 2 | pt->vsync_offset_pulse_width_lo >> 4;
+	unsigned vsync_offset = (pt->hsync_vsync_offset_pulse_width_hi & 0xc) << 2 | pt->vsync_offset_pulse_width_lo >> 4;
 	unsigned vsync_pulse_width = (pt->hsync_vsync_offset_pulse_width_hi & 0x3) << 4 | (pt->vsync_offset_pulse_width_lo & 0xf);
 
 	/* ignore tiny modes */

[ 30/49] mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wanpeng Li <liwanp@linux.vnet.ibm.com>

commit d00285884c0892bb1310df96bce6056e9ce9b9d9 upstream.

hugetlb_total_pages is used for overcommit calculations but the current
implementation considers only the default hugetlb page size (which is
either the first defined hugepage size or the one specified by
default_hugepagesz kernel boot parameter).

If the system is configured for more than one hugepage size, which is
possible since commit a137e1cc6d6e ("hugetlbfs: per mount huge page
sizes") then the overcommit estimation done by __vm_enough_memory()
(resp.  shown by meminfo_proc_show) is not precise - there is an
impression of more available/allowed memory.  This can lead to an
unexpected ENOMEM/EFAULT resp.  SIGSEGV when memory is accounted.

Testcase:
  boot: hugepagesz=1G hugepages=1
  the default overcommit ratio is 50
  before patch:

    egrep 'CommitLimit' /proc/meminfo
    CommitLimit:     55434168 kB

  after patch:

    egrep 'CommitLimit' /proc/meminfo
    CommitLimit:     54909880 kB

[akpm@linux-foundation.org: coding-style tweak]
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/hugetlb.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2006,8 +2006,12 @@ int hugetlb_report_node_meminfo(int nid,
 /* Return the number pages of memory we physically have, in PAGE_SIZE units. */
 unsigned long hugetlb_total_pages(void)
 {
-	struct hstate *h = &default_hstate;
-	return h->nr_huge_pages * pages_per_huge_page(h);
+	struct hstate *h;
+	unsigned long nr_total_pages = 0;
+
+	for_each_hstate(h)
+		nr_total_pages += h->nr_huge_pages * pages_per_huge_page(h);
+	return nr_total_pages;
 }
 
 static int hugetlb_acct_memory(struct hstate *h, long delta)

[ 31/49] cifs: ignore everything in SPNEGO blob after mechTypes

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@redhat.com>

commit f853c616883a8de966873a1dab283f1369e275a1 upstream.

We've had several reports of people attempting to mount Windows 8 shares
and getting failures with a return code of -EINVAL. The default sec=
mode changed recently to sec=ntlmssp. With that, we expect and parse a
SPNEGO blob from the server in the NEGOTIATE reply.

The current decode_negTokenInit function first parses all of the
mechTypes and then tries to parse the rest of the negTokenInit reply.
The parser however currently expects a mechListMIC or nothing to follow the
mechTypes, but Windows 8 puts a mechToken field there instead to carry
some info for the new NegoEx stuff.

In practice, we don't do anything with the fields after the mechTypes
anyway so I don't see any real benefit in continuing to parse them.
This patch just has the kernel ignore the fields after the mechTypes.
We'll probably need to reinstate some of this if we ever want to support
NegoEx.

Reported-by: Jason Burgess <jason@jacknife2.dns2go.com>
Reported-by: Yan Li <elliot.li.tech@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/asn1.c |   53 +++++------------------------------------------------
 1 file changed, 5 insertions(+), 48 deletions(-)

--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -614,53 +614,10 @@ decode_negTokenInit(unsigned char *secur
 		}
 	}
 
-	/* mechlistMIC */
-	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-		/* Check if we have reached the end of the blob, but with
-		   no mechListMic (e.g. NTLMSSP instead of KRB5) */
-		if (ctx.error == ASN1_ERR_DEC_EMPTY)
-			goto decode_negtoken_exit;
-		cFYI(1, "Error decoding last part negTokenInit exit3");
-		return 0;
-	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
-		/* tag = 3 indicating mechListMIC */
-		cFYI(1, "Exit 4 cls = %d con = %d tag = %d end = %p (%d)",
-			cls, con, tag, end, *end);
-		return 0;
-	}
-
-	/* sequence */
-	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-		cFYI(1, "Error decoding last part negTokenInit exit5");
-		return 0;
-	} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
-		   || (tag != ASN1_SEQ)) {
-		cFYI(1, "cls = %d con = %d tag = %d end = %p (%d)",
-			cls, con, tag, end, *end);
-	}
-
-	/* sequence of */
-	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-		cFYI(1, "Error decoding last part negTokenInit exit 7");
-		return 0;
-	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)) {
-		cFYI(1, "Exit 8 cls = %d con = %d tag = %d end = %p (%d)",
-			cls, con, tag, end, *end);
-		return 0;
-	}
-
-	/* general string */
-	if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) {
-		cFYI(1, "Error decoding last part negTokenInit exit9");
-		return 0;
-	} else if ((cls != ASN1_UNI) || (con != ASN1_PRI)
-		   || (tag != ASN1_GENSTR)) {
-		cFYI(1, "Exit10 cls = %d con = %d tag = %d end = %p (%d)",
-			cls, con, tag, end, *end);
-		return 0;
-	}
-	cFYI(1, "Need to call asn1_octets_decode() function for %s",
-		ctx.pointer);	/* is this UTF-8 or ASCII? */
-decode_negtoken_exit:
+	/*
+	 * We currently ignore anything at the end of the SPNEGO blob after
+	 * the mechTypes have been parsed, since none of that info is
+	 * used at the moment.
+	 */
 	return 1;
 }

[ 32/49] ext4: fix the wrong number of the allocated blocks in ext4_split_extent()

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zheng Liu <wenqing.lz@taobao.com>

commit 3a2256702e47f68f921dfad41b1764d05c572329 upstream.

This commit fixes a wrong return value of the number of the allocated
blocks in ext4_split_extent.  When the length of blocks we want to
allocate is greater than the length of the current extent, we return a
wrong number.  Let's see what happens in the following case when we
call ext4_split_extent().

  map: [48, 72]
  ex:  [32, 64, u]

'ex' will be split into two parts:
  ex1: [32, 47, u]
  ex2: [48, 64, w]

'map->m_len' is returned from this function, and the value is 24.  But
the real length is 16.  So it should be fixed.

Meanwhile in this commit we use right length of the allocated blocks
when get_reserved_cluster_alloc in ext4_ext_handle_uninitialized_extents
is called.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/extents.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2901,6 +2901,7 @@ static int ext4_split_extent(handle_t *h
 	int err = 0;
 	int uninitialized;
 	int split_flag1, flags1;
+	int allocated = map->m_len;
 
 	depth = ext_depth(inode);
 	ex = path[depth].p_ext;
@@ -2919,6 +2920,8 @@ static int ext4_split_extent(handle_t *h
 				map->m_lblk + map->m_len, split_flag1, flags1);
 		if (err)
 			goto out;
+	} else {
+		allocated = ee_len - (map->m_lblk - ee_block);
 	}
 
 	ext4_ext_drop_refs(path);
@@ -2941,7 +2944,7 @@ static int ext4_split_extent(handle_t *h
 
 	ext4_ext_show_leaf(inode, path);
 out:
-	return err ? err : map->m_len;
+	return err ? err : allocated;
 }
 
 #define EXT4_EXT_ZERO_LEN 7
@@ -3309,6 +3312,7 @@ out:
 					allocated - map->m_len);
 		allocated = map->m_len;
 	}
+	map->m_len = allocated;
 
 	/*
 	 * If we have done fallocate with the offset that is already

[ 33/49] usb-storage: add unusual_devs entry for Samsung YP-Z3 mp3 player

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Artamonow <mad_soft@inbox.ru>

commit 29f86e66428ee083aec106cca1748dc63d98ce23 upstream.

Device stucks on filesystem writes, unless following quirk is passed:
  echo 04e8:5136:m > /sys/module/usb_storage/parameters/quirks

Add corresponding entry to unusual_devs.h

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/storage/unusual_devs.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -488,6 +488,13 @@ UNUSUAL_DEV(  0x04e8, 0x5122, 0x0000, 0x
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG),
 
+/* Added by Dmitry Artamonow <mad_soft@inbox.ru> */
+UNUSUAL_DEV(  0x04e8, 0x5136, 0x0000, 0x9999,
+		"Samsung",
+		"YP-Z3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64),
+
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
  * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.

[ 34/49] IPoIB: Fix send lockup due to missed TX completion

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Marciniszyn <mike.marciniszyn@intel.com>

commit 1ee9e2aa7b31427303466776f455d43e5e3c9275 upstream.

Commit f0dc117abdfa ("IPoIB: Fix TX queue lockup with mixed UD/CM
traffic") attempts to solve an issue where unprocessed UD send
completions can deadlock the netdev.

The patch doesn't fully resolve the issue because if more than half
the tx_outstanding's were UD and all of the destinations are RC
reachable, arming the CQ doesn't solve the issue.

This patch uses the IB_CQ_REPORT_MISSED_EVENTS on the
ib_req_notify_cq().  If the rc is above 0, the UD send cq completion
callback is called directly to re-arm the send completion timer.

This issue is seen in very large parallel filesystem deployments
and the patch has been shown to correct the issue.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/ulp/ipoib/ipoib_cm.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -753,9 +753,13 @@ void ipoib_cm_send(struct net_device *de
 		if (++priv->tx_outstanding == ipoib_sendq_size) {
 			ipoib_dbg(priv, "TX ring 0x%x full, stopping kernel net queue\n",
 				  tx->qp->qp_num);
-			if (ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP))
-				ipoib_warn(priv, "request notify on send CQ failed\n");
 			netif_stop_queue(dev);
+			rc = ib_req_notify_cq(priv->send_cq,
+				IB_CQ_NEXT_COMP | IB_CQ_REPORT_MISSED_EVENTS);
+			if (rc < 0)
+				ipoib_warn(priv, "request notify on send CQ failed\n");
+			else if (rc)
+				ipoib_send_comp_handler(priv->send_cq, dev);
 		}
 	}
 }

[ 35/49] clockevents: Dont allow dummy broadcast timers

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Rutland <mark.rutland@arm.com>

commit a7dc19b8652c862d5b7c4d2339bd3c428bd29c4a upstream.

Currently tick_check_broadcast_device doesn't reject clock_event_devices
with CLOCK_EVT_FEAT_DUMMY, and may select them in preference to real
hardware if they have a higher rating value. In this situation, the
dummy timer is responsible for broadcasting to itself, and the core
clockevents code may attempt to call non-existent callbacks for
programming the dummy, eventually leading to a panic.

This patch makes tick_check_broadcast_device always reject dummy timers,
preventing this problem.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jon Medhurst (Tixy) <tixy@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/tick-broadcast.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -66,7 +66,8 @@ static void tick_broadcast_start_periodi
  */
 int tick_check_broadcast_device(struct clock_event_device *dev)
 {
-	if ((tick_broadcast_device.evtdev &&
+	if ((dev->features & CLOCK_EVT_FEAT_DUMMY) ||
+	    (tick_broadcast_device.evtdev &&
 	     tick_broadcast_device.evtdev->rating >= dev->rating) ||
 	     (dev->features & CLOCK_EVT_FEAT_C3STOP))
 		return 0;

[ 36/49] x86-64: Fix the failure case in copy_user_handle_tail()

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: CQ Tang <cq.tang@intel.com>

commit 66db3feb486c01349f767b98ebb10b0c3d2d021b upstream.

The increment of "to" in copy_user_handle_tail() will have incremented
before a failure has been noted.  This causes us to skip a byte in the
failure case.

Only do the increment when assured there is no failure.

Signed-off-by: CQ Tang <cq.tang@intel.com>
Link: http://lkml.kernel.org/r/20130318150221.8439.993.stgit@phlsvslse11.ph.intel.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/lib/usercopy_64.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -169,10 +169,10 @@ copy_user_handle_tail(char *to, char *fr
 	char c;
 	unsigned zero_len;
 
-	for (; len; --len) {
+	for (; len; --len, to++) {
 		if (__get_user_nocheck(c, from++, sizeof(char)))
 			break;
-		if (__put_user_nocheck(c, to++, sizeof(char)))
+		if (__put_user_nocheck(c, to, sizeof(char)))
 			break;
 	}
 

[ 37/49] USB: xhci - fix bit definitions for IMAN register

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <dtor@vmware.com>

commit f8264340e694604863255cc0276491d17c402390 upstream.

According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1
of IMAN register. Previously their definitions were reversed.

Even though there are no ill effects being observed from the swapped
definitions (because IMAN_IP is RW1C and in legacy PCI case we come in
with it already set to 1 so it was clearing itself even though we were
setting IMAN_IE instead of IMAN_IP), we should still correct the values.

This patch should be backported to kernels as old as 2.6.36, that
contain the commit 4e833c0b87a30798e67f06120cecebef6ee9644c "xhci: don't
re-enable IE constantly".

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -206,8 +206,8 @@ struct xhci_op_regs {
 /* bits 12:31 are reserved (and should be preserved on writes). */
 
 /* IMAN - Interrupt Management Register */
-#define IMAN_IP		(1 << 1)
-#define IMAN_IE		(1 << 0)
+#define IMAN_IE		(1 << 1)
+#define IMAN_IP		(1 << 0)
 
 /* USBSTS - USB status - status bitmasks */
 /* HC not running - set to 1 when run/stop bit is cleared. */

[ 38/49] USB: serial: fix interface refcounting

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit d7971051e4df825e0bc11b995e87bfe86355b8e5 upstream.

Make sure the interface is not released before our serial device.

Note that drivers are still not allowed to access the interface in
any way that may interfere with another driver that may have gotten
bound to the same interface after disconnect returns.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/usb-serial.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -168,6 +168,7 @@ static void destroy_serial(struct kref *
 		}
 	}
 
+	usb_put_intf(serial->interface);
 	usb_put_dev(serial->dev);
 	kfree(serial);
 }
@@ -624,7 +625,7 @@ static struct usb_serial *create_serial(
 	}
 	serial->dev = usb_get_dev(dev);
 	serial->type = driver;
-	serial->interface = interface;
+	serial->interface = usb_get_intf(interface);
 	kref_init(&serial->kref);
 	mutex_init(&serial->disc_mutex);
 	serial->minor = SERIAL_TTY_NO_MINOR;

[ 39/49] udf: Fix bitmap overflow on large filesystems with small block size

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 89b1f39eb4189de745fae554b0d614d87c8d5c63 upstream.

For large UDF filesystems with 512-byte blocks the number of necessary
bitmap blocks is larger than 2^16 so s_nr_groups in udf_bitmap overflows
(the number will overflow for filesystems larger than 128 GB with
512-byte blocks). That results in ENOSPC errors despite the filesystem
has plenty of free space.

Fix the problem by changing s_nr_groups' type to 'int'. That is enough
even for filesystems 2^32 blocks (UDF maximum) and 512-byte blocksize.

Reported-and-tested-by: v10lator@myway.de
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Jim Trigg <jtrigg@spamcop.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/udf/udf_sb.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/udf/udf_sb.h
+++ b/fs/udf/udf_sb.h
@@ -79,7 +79,7 @@ struct udf_virtual_data {
 struct udf_bitmap {
 	__u32			s_extLength;
 	__u32			s_extPosition;
-	__u16			s_nr_groups;
+	int			s_nr_groups;
 	struct buffer_head 	**s_block_bitmap;
 };
 

[ 40/49] USB: garmin_gps: fix memory leak on disconnect

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 618aa1068df29c37a58045fe940f9106664153fd upstream.

Remove bogus disconnect test introduced by 95bef012e ("USB: more serial
drivers writing after disconnect") which prevented queued data from
being freed on disconnect.

The possible IO it was supposed to prevent is long gone.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/garmin_gps.c |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -973,10 +973,7 @@ static void garmin_close(struct usb_seri
 	if (!serial)
 		return;
 
-	mutex_lock(&port->serial->disc_mutex);
-
-	if (!port->serial->disconnected)
-		garmin_clear(garmin_data_p);
+	garmin_clear(garmin_data_p);
 
 	/* shutdown our urbs */
 	usb_kill_urb(port->read_urb);
@@ -985,8 +982,6 @@ static void garmin_close(struct usb_seri
 	/* keep reset state so we know that we must start a new session */
 	if (garmin_data_p->state != STATE_RESET)
 		garmin_data_p->state = STATE_DISCONNECTED;
-
-	mutex_unlock(&port->serial->disc_mutex);
 }
 
 

[ 41/49] USB: io_ti: fix get_icount for two port adapters

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 5492bf3d5655b4954164f69c02955a7fca267611 upstream.

Add missing get_icount field to two-port driver.

The two-port driver was not updated when switching to the new icount
interface in commit 0bca1b913aff ("tty: Convert the USB drivers to the
new icount interface").

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/io_ti.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2793,6 +2793,7 @@ static struct usb_serial_driver edgeport
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
 	.tiocmset		= edge_tiocmset,
+	.get_icount		= edge_get_icount,
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,

[ 42/49] key: Fix resource leak

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Cox <alan@linux.intel.com>

commit a84a921978b7d56e0e4b87ffaca6367429b4d8ff upstream.

On an error iov may still have been reallocated and need freeing

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/keys/keyctl.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -1067,12 +1067,12 @@ long keyctl_instantiate_key_iov(key_seri
 	ret = rw_copy_check_uvector(WRITE, _payload_iov, ioc,
 				    ARRAY_SIZE(iovstack), iovstack, &iov);
 	if (ret < 0)
-		return ret;
+		goto err;
 	if (ret == 0)
 		goto no_payload_free;
 
 	ret = keyctl_instantiate_key_common(id, iov, ioc, ret, ringid);
-
+err:
 	if (iov != iovstack)
 		kfree(iov);
 	return ret;

[ 43/49] Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and security keys

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

commit 8aec0f5d4137532de14e6554fd5dd201ff3a3c49 upstream.

Looking at mm/process_vm_access.c:process_vm_rw() and comparing it to
compat_process_vm_rw() shows that the compatibility code requires an
explicit "access_ok()" check before calling
compat_rw_copy_check_uvector(). The same difference seems to appear when
we compare fs/read_write.c:do_readv_writev() to
fs/compat.c:compat_do_readv_writev().

This subtle difference between the compat and non-compat requirements
should probably be debated, as it seems to be error-prone. In fact,
there are two others sites that use this function in the Linux kernel,
and they both seem to get it wrong:

Now shifting our attention to fs/aio.c, we see that aio_setup_iocb()
also ends up calling compat_rw_copy_check_uvector() through
aio_setup_vectored_rw(). Unfortunately, the access_ok() check appears to
be missing. Same situation for
security/keys/compat.c:compat_keyctl_instantiate_key_iov().

I propose that we add the access_ok() check directly into
compat_rw_copy_check_uvector(), so callers don't have to worry about it,
and it therefore makes the compat call code similar to its non-compat
counterpart. Place the access_ok() check in the same location where
copy_from_user() can trigger a -EFAULT error in the non-compat code, so
the ABI behaviors are alike on both compat and non-compat.

While we are here, fix compat_do_readv_writev() so it checks for
compat_rw_copy_check_uvector() negative return values.

And also, fix a memory leak in compat_keyctl_instantiate_key_iov() error
handling.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/compat.c            |   15 +++++++--------
 security/keys/compat.c |    4 ++--
 2 files changed, 9 insertions(+), 10 deletions(-)

--- a/fs/compat.c
+++ b/fs/compat.c
@@ -576,6 +576,10 @@ ssize_t compat_rw_copy_check_uvector(int
 	}
 	*ret_pointer = iov;
 
+	ret = -EFAULT;
+	if (!access_ok(VERIFY_READ, uvector, nr_segs*sizeof(*uvector)))
+		goto out;
+
 	/*
 	 * Single unix specification:
 	 * We should -EINVAL if an element length is not >= 0 and fitting an
@@ -1106,17 +1110,12 @@ static ssize_t compat_do_readv_writev(in
 	if (!file->f_op)
 		goto out;
 
-	ret = -EFAULT;
-	if (!access_ok(VERIFY_READ, uvector, nr_segs*sizeof(*uvector)))
-		goto out;
-
-	tot_len = compat_rw_copy_check_uvector(type, uvector, nr_segs,
+	ret = compat_rw_copy_check_uvector(type, uvector, nr_segs,
 					       UIO_FASTIOV, iovstack, &iov);
-	if (tot_len == 0) {
-		ret = 0;
+	if (ret <= 0)
 		goto out;
-	}
 
+	tot_len = ret;
 	ret = rw_verify_area(type, file, pos, tot_len);
 	if (ret < 0)
 		goto out;
--- a/security/keys/compat.c
+++ b/security/keys/compat.c
@@ -40,12 +40,12 @@ long compat_keyctl_instantiate_key_iov(
 					   ARRAY_SIZE(iovstack),
 					   iovstack, &iov);
 	if (ret < 0)
-		return ret;
+		goto err;
 	if (ret == 0)
 		goto no_payload_free;
 
 	ret = keyctl_instantiate_key_common(id, iov, ioc, ret, ringid);
-
+err:
 	if (iov != iovstack)
 		kfree(iov);
 	return ret;

[ 44/49] isofs: avoid info leak on export

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

commit fe685aabf7c8c9f138e5ea900954d295bf229175 upstream.

For type 1 the parent_offset member in struct isofs_fid gets copied
uninitialized to userland. Fix this by initializing it to 0.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/isofs/export.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/isofs/export.c
+++ b/fs/isofs/export.c
@@ -135,6 +135,7 @@ isofs_export_encode_fh(struct dentry *de
 	len = 3;
 	fh32[0] = ei->i_iget5_block;
  	fh16[2] = (__u16)ei->i_iget5_offset;  /* fh16 [sic] */
+	fh16[3] = 0;  /* avoid leaking uninitialized data */
 	fh32[2] = inode->i_generation;
 	if (connectable && !S_ISDIR(inode->i_mode)) {
 		struct inode *parent;

[ 45/49] udf: avoid info leak on export

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

commit 0143fc5e9f6f5aad4764801015bc8d4b4a278200 upstream.

For type 0x51 the udf.parent_partref member in struct fid gets copied
uninitialized to userland. Fix this by initializing it to 0.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/udf/namei.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -1297,6 +1297,7 @@ static int udf_encode_fh(struct dentry *
 	*lenp = 3;
 	fid->udf.block = location.logicalBlockNum;
 	fid->udf.partref = location.partitionReferenceNum;
+	fid->udf.parent_partref = 0;
 	fid->udf.generation = inode->i_generation;
 
 	if (connectable && !S_ISDIR(inode->i_mode)) {

[ 46/49] i915: initialize CADL in opregion

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lekensteyn <lekensteyn@gmail.com>

commit d627b62ff8d4d36761adbcd90ff143d79c94ab22 upstream.

This is rather a hack to fix brightness hotkeys on a Clevo laptop. CADL is not
used anywhere in the driver code at the moment, but it could be used in BIOS as
is the case with the Clevo laptop.

The Clevo B7130 requires the CADL field to contain at least the ID of
the LCD device. If this field is empty, the ACPI methods that are called
on pressing brightness / display switching hotkeys will not trigger a
notification. As a result, it appears as no hotkey has been pressed.

Reference: https://bugs.freedesktop.org/show_bug.cgi?id=45452
Tested-by: Peter Wu <lekensteyn@gmail.com>
Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_opregion.c |   23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/i915/intel_opregion.c
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -413,6 +413,25 @@ blind_set:
 	goto end;
 }
 
+static void intel_setup_cadls(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+	int i = 0;
+	u32 disp_id;
+
+	/* Initialize the CADL field by duplicating the DIDL values.
+	 * Technically, this is not always correct as display outputs may exist,
+	 * but not active. This initialization is necessary for some Clevo
+	 * laptops that check this field before processing the brightness and
+	 * display switching hotkeys. Just like DIDL, CADL is NULL-terminated if
+	 * there are less than eight devices. */
+	do {
+		disp_id = ioread32(&opregion->acpi->didl[i]);
+		iowrite32(disp_id, &opregion->acpi->cadl[i]);
+	} while (++i < 8 && disp_id != 0);
+}
+
 void intel_opregion_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -422,8 +441,10 @@ void intel_opregion_init(struct drm_devi
 		return;
 
 	if (opregion->acpi) {
-		if (drm_core_check_feature(dev, DRIVER_MODESET))
+		if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 			intel_didl_outputs(dev);
+			intel_setup_cadls(dev);
+		}
 
 		/* Notify BIOS we are ready to handle ACPI video ext notifs.
 		 * Right now, all the events are handled by the ACPI video module.

[ 47/49] exec: use -ELOOP for max recursion depth

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit d740269867021faf4ce38a449353d2b986c34a67 upstream.

To avoid an explosion of request_module calls on a chain of abusive
scripts, fail maximum recursion with -ELOOP instead of -ENOEXEC. As soon
as maximum recursion depth is hit, the error will fail all the way back
up the chain, aborting immediately.

This also has the side-effect of stopping the user's shell from attempting
to reexecute the top-level file as a shell script. As seen in the
dash source:

        if (cmd != path_bshell && errno == ENOEXEC) {
                *argv-- = cmd;
                *argv = cmd = path_bshell;
                goto repeat;
        }

The above logic was designed for running scripts automatically that lacked
the "#!" header, not to re-try failed recursion. On a legitimate -ENOEXEC,
things continue to behave as the shell expects.

Additionally, when tracking recursion, the binfmt handlers should not be
involved. The recursion being tracked is the depth of calls through
search_binary_handler(), so that function should be exclusively responsible
for tracking the depth.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: halfdog <me@halfdog.net>
Cc: P J P <ppandit@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/binfmt_em86.c        |    1 -
 fs/binfmt_misc.c        |    6 ------
 fs/binfmt_script.c      |    4 +---
 fs/exec.c               |   10 +++++-----
 include/linux/binfmts.h |    2 --
 5 files changed, 6 insertions(+), 17 deletions(-)

--- a/fs/binfmt_em86.c
+++ b/fs/binfmt_em86.c
@@ -42,7 +42,6 @@ static int load_em86(struct linux_binprm
 			return -ENOEXEC;
 	}
 
-	bprm->recursion_depth++; /* Well, the bang-shell is implicit... */
 	allow_write_access(bprm->file);
 	fput(bprm->file);
 	bprm->file = NULL;
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -116,10 +116,6 @@ static int load_misc_binary(struct linux
 	if (!enabled)
 		goto _ret;
 
-	retval = -ENOEXEC;
-	if (bprm->recursion_depth > BINPRM_MAX_RECURSION)
-		goto _ret;
-
 	/* to keep locking time low, we copy the interpreter string */
 	read_lock(&entries_lock);
 	fmt = check_file(bprm);
@@ -200,8 +196,6 @@ static int load_misc_binary(struct linux
 	if (retval < 0)
 		goto _error;
 
-	bprm->recursion_depth++;
-
 	retval = search_binary_handler (bprm, regs);
 	if (retval < 0)
 		goto _error;
--- a/fs/binfmt_script.c
+++ b/fs/binfmt_script.c
@@ -22,15 +22,13 @@ static int load_script(struct linux_binp
 	char interp[BINPRM_BUF_SIZE];
 	int retval;
 
-	if ((bprm->buf[0] != '#') || (bprm->buf[1] != '!') ||
-	    (bprm->recursion_depth > BINPRM_MAX_RECURSION))
+	if ((bprm->buf[0] != '#') || (bprm->buf[1] != '!'))
 		return -ENOEXEC;
 	/*
 	 * This section does the #! interpretation.
 	 * Sorta complicated, but hopefully it will work.  -TYT
 	 */
 
-	bprm->recursion_depth++;
 	allow_write_access(bprm->file);
 	fput(bprm->file);
 	bprm->file = NULL;
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1369,6 +1369,10 @@ int search_binary_handler(struct linux_b
 	int try,retval;
 	struct linux_binfmt *fmt;
 
+	/* This allows 4 levels of binfmt rewrites before failing hard. */
+	if (depth > 5)
+		return -ELOOP;
+
 	retval = security_bprm_check(bprm);
 	if (retval)
 		return retval;
@@ -1387,12 +1391,8 @@ int search_binary_handler(struct linux_b
 			if (!try_module_get(fmt->module))
 				continue;
 			read_unlock(&binfmt_lock);
+			bprm->recursion_depth = depth + 1;
 			retval = fn(bprm, regs);
-			/*
-			 * Restore the depth counter to its starting value
-			 * in this call, so we don't have to rely on every
-			 * load_binary function to restore it on return.
-			 */
 			bprm->recursion_depth = depth;
 			if (retval >= 0) {
 				if (depth == 0)
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -67,8 +67,6 @@ struct linux_binprm {
 #define BINPRM_FLAGS_EXECFD_BIT 1
 #define BINPRM_FLAGS_EXECFD (1 << BINPRM_FLAGS_EXECFD_BIT)
 
-#define BINPRM_MAX_RECURSION 4
-
 /* Function parameter for binfmt->coredump */
 struct coredump_params {
 	long signr;

[ 48/49] rt2x00: error in configurations with mesh support disabled

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit 6ef9e2f6d12ce9e2120916804d2ddd46b954a70b upstream.

If CONFIG_MAC80211_MESH is not set, cfg80211 will now allow advertising
interface combinations with NL80211_IFTYPE_MESH_POINT present.
Add appropriate ifdefs to avoid running into errors.

[Backported for 3.8-stable. Removed code of simultaneous AP and mesh
mode added in 4a5fc6d 3.9-rc1.]

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Lingzhu Xiang <lxiang@redhat.com>
Reviewed-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rt2x00/rt2x00dev.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1113,7 +1113,9 @@ int rt2x00lib_probe_dev(struct rt2x00_de
 		rt2x00dev->hw->wiphy->interface_modes |=
 		    BIT(NL80211_IFTYPE_ADHOC) |
 		    BIT(NL80211_IFTYPE_AP) |
+#ifdef CONFIG_MAC80211_MESH
 		    BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
 		    BIT(NL80211_IFTYPE_WDS);
 
 	/*

[ 49/49] asus-laptop: Do not call HWRS on init

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

commit cb7da022450cdaaebd33078b6b32fb7dd2aaf6db upstream.

Since commit 8871e99f89b7 ('asus-laptop: HRWS/HWRS typo'), module
initialisation is very slow on the Asus UL30A.  The HWRS method takes
about 12 seconds to run, and subsequent initialisation also seems to
be delayed.  Since we don't really need the result, don't bother
calling it on init.  Those who are curious can still get the result
through the 'infos' device attribute.

Update the comment about HWRS in show_infos().

Reported-by: ryan <draziw+deb@gmail.com>
References: http://bugs.debian.org/692436
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/x86/asus-laptop.c |   17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -643,8 +643,10 @@ static ssize_t show_infos(struct device
 	/*
 	 * The HWRS method return informations about the hardware.
 	 * 0x80 bit is for WLAN, 0x100 for Bluetooth.
+	 * 0x40 for WWAN, 0x10 for WIMAX.
 	 * The significance of others is yet to be found.
-	 * If we don't find the method, we assume the device are present.
+	 * We don't currently use this for device detection, and it
+	 * takes several seconds to run on some systems.
 	 */
 	rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp);
 	if (!ACPI_FAILURE(rv))
@@ -1271,7 +1273,7 @@ static int asus_laptop_get_info(struct a
 {
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *model = NULL;
-	unsigned long long bsts_result, hwrs_result;
+	unsigned long long bsts_result;
 	char *string = NULL;
 	acpi_status status;
 
@@ -1333,17 +1335,6 @@ static int asus_laptop_get_info(struct a
 	if (*string)
 		pr_notice("  %s model detected\n", string);
 
-	/*
-	 * The HWRS method return informations about the hardware.
-	 * 0x80 bit is for WLAN, 0x100 for Bluetooth,
-	 * 0x40 for WWAN, 0x10 for WIMAX.
-	 * The significance of others is yet to be found.
-	 */
-	status =
-	    acpi_evaluate_integer(asus->handle, "HWRS", NULL, &hwrs_result);
-	if (!ACPI_FAILURE(status))
-		pr_notice("  HWRS returned %x", (int)hwrs_result);
-
 	if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL))
 		asus->have_rsts = true;
 

Re: [ 00/49] 3.0.71-stable review

[Shuah Khan]

On Tue, Mar 26, 2013 at 5:00 PM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 3.0.71 release.
> There are 49 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Mar 28 22:57:54 UTC 2013.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.0.71-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Patches applied cleanly to 3.0.70, 3.4.37, and 3.8.4

Compiled and booted on the following systems:

HP EliteBook 6930p Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz
HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics

dmesgs for all releases look good. No regressions compared to the previous
dmesgs for each of these releases.

Cross-compile tests results:

alpha: defconfig passed on all
arm: defconfig passed on all
arm64: not applicable to 3.0.y, 3.4.y. defconfig passed on 3.8.y
c6x: not applicable to 3.0.y, defconfig passed on 3.4.y, and 3.8.y.
powerpc: wii_defconfig passed on all
sh: defconfig passed on all
sparc: defconfig passed on all
tile: tilegx_defconfig passed on all

Known issue since 3.0.70, 3.4.37 and 3.8.4

kernel/signal.c: In function �flush_signal_handlers�:
kernel/signal.c:441:9: error: �struct sigaction� has no member named
�sa_restorer�
make[1]: *** [kernel/signal.o] Error 1
make: *** [kernel] Error 2

mips: defconfig failed
mipsel: defconfig failed

-- Shuah

Re: [ 00/49] 3.0.71-stable review

[Satoru Takeuchi]

At Tue, 26 Mar 2013 16:00:57 -0700,
Greg Kroah-Hartman wrote:
> 
> This is the start of the stable review cycle for the 3.0.71 release.
> There are 49 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Mar 28 22:57:54 UTC 2013.
> Anything received after that time might be too late.

This kernel can be built and boot without any problem.
Building a kernel with this kernel also works fine.

 - Build Machine: debian wheezy x86_64
   CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz x 4
   memory: 8GB

 - Test machine: debian wheezy x86_64(KVM guest on the Build Machine)
   vCPU: x2
   memory: 2GB

I reviewed the following patches and it looks good to me.

> CQ Tang <cq.tang@intel.com>
>     x86-64: Fix the failure case in copy_user_handle_tail()
> 
> Mark Rutland <mark.rutland@arm.com>
>     clockevents: Don't allow dummy broadcast timers

Thanks,
Satoru