From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Ming Lei <ming.lei@canonical.com>,
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Subject: [ 05/56] Bluetooth: Add support for Dell[QCA 0cf3:0036]
Date: Tue, 2 Apr 2013 15:49:32 -0700 [thread overview]
Message-ID: <20130402224712.465445368@linuxfoundation.org> (raw)
In-Reply-To: <20130402224711.840825715@linuxfoundation.org>
3.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Lei <ming.lei@canonical.com>
commit d66629c1325399cf080ba8b2fb086c10e5439cdd upstream.
Add support for the AR9462 chip
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=0036 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -71,6 +71,7 @@ static struct usb_device_id ath3k_table[
{ USB_DEVICE(0x03F0, 0x311D) },
/* Atheros AR3012 with sflash firmware*/
+ { USB_DEVICE(0x0CF3, 0x0036) },
{ USB_DEVICE(0x0CF3, 0x3004) },
{ USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x13d3, 0x3375) },
@@ -93,6 +94,7 @@ MODULE_DEVICE_TABLE(usb, ath3k_table);
static struct usb_device_id ath3k_blist_tbl[] = {
/* Atheros AR3012 with sflash firmware*/
+ { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -136,6 +136,7 @@ static struct usb_device_id blacklist_ta
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
/* Atheros 3012 with sflash firmware */
+ { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
next prev parent reply other threads:[~2013-04-02 22:49 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-02 22:49 [ 00/56] 3.0.72-stable review Greg Kroah-Hartman
2013-04-02 22:49 ` [ 01/56] signal: Define __ARCH_HAS_SA_RESTORER so we know whether to clear sa_restorer Greg Kroah-Hartman
2013-04-02 22:49 ` [ 02/56] kernel/signal.c: use __ARCH_HAS_SA_RESTORER instead of SA_RESTORER Greg Kroah-Hartman
2013-04-02 22:49 ` [ 03/56] SUNRPC: Add barriers to ensure read ordering in rpc_wake_up_task_queue_locked Greg Kroah-Hartman
2013-04-02 22:49 ` [ 04/56] Bluetooth: Fix not closing SCO sockets in the BT_CONNECT2 state Greg Kroah-Hartman
2013-04-02 22:49 ` Greg Kroah-Hartman [this message]
2013-04-02 22:49 ` [ 06/56] Bluetooth: Add support for Dell[QCA 0cf3:817a] Greg Kroah-Hartman
2013-04-02 22:49 ` [ 07/56] staging: comedi: s626: fix continuous acquisition Greg Kroah-Hartman
2013-04-02 22:49 ` [ 08/56] sysfs: fix race between readdir and lseek Greg Kroah-Hartman
2013-04-02 22:49 ` [ 09/56] sysfs: handle failure path correctly for readdir() Greg Kroah-Hartman
2013-04-02 22:49 ` [ 10/56] b43: A fix for DMA transmission sequence errors Greg Kroah-Hartman
2013-04-02 22:49 ` [ 11/56] xen-blkback: fix dispatch_rw_block_io() error path Greg Kroah-Hartman
2013-04-02 22:49 ` [ 12/56] usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BD Greg Kroah-Hartman
2013-04-02 22:49 ` [ 13/56] vt: synchronize_rcu() under spinlock is not nice Greg Kroah-Hartman
2013-04-02 22:49 ` [ 14/56] mwifiex: cancel cmd timer and free curr_cmd in shutdown process Greg Kroah-Hartman
2013-04-06 19:55 ` Ben Hutchings
2013-04-08 17:58 ` Bing Zhao
2013-04-02 22:49 ` [ 15/56] net/irda: add missing error path release_sock call Greg Kroah-Hartman
2013-04-02 22:49 ` [ 16/56] usb: xhci: Fix TRB transfer length macro used for Event TRB Greg Kroah-Hartman
2013-04-02 22:49 ` [ 17/56] Btrfs: limit the global reserve to 512mb Greg Kroah-Hartman
2013-04-02 22:49 ` [ 18/56] KVM: Clean up error handling during VCPU creation Greg Kroah-Hartman
2013-04-02 22:49 ` [ 19/56] x25: Validate incoming call user data lengths Greg Kroah-Hartman
2013-04-02 22:49 ` [ 20/56] x25: Handle undersized/fragmented skbs Greg Kroah-Hartman
2013-04-02 22:49 ` [ 21/56] batman-adv: bat_socket_read missing checks Greg Kroah-Hartman
2013-04-02 22:49 ` [ 22/56] batman-adv: Only write requested number of byte to user buffer Greg Kroah-Hartman
2013-04-02 22:49 ` [ 23/56] KVM: x86: Prevent starting PIT timers in the absence of irqchip support Greg Kroah-Hartman
2013-04-02 22:49 ` [ 24/56] NFSv4: include bitmap in nfsv4 get acl data Greg Kroah-Hartman
2013-04-02 22:49 ` [ 25/56] NFSv4: Fix an Oops in the NFSv4 getacl code Greg Kroah-Hartman
2013-04-02 22:49 ` [ 26/56] NFS: nfs_getaclargs.acl_len is a size_t Greg Kroah-Hartman
2013-04-02 22:49 ` [ 27/56] KVM: Ensure all vcpus are consistent with in-kernel irqchip settings Greg Kroah-Hartman
2013-04-02 22:49 ` [ 28/56] macvtap: zerocopy: validate vectors before building skb Greg Kroah-Hartman
2013-04-02 22:49 ` [ 29/56] KVM: Fix buffer overflow in kvm_set_irq() Greg Kroah-Hartman
2013-04-02 22:49 ` [ 30/56] mm/hotplug: correctly add new zone to all other nodes zone lists Greg Kroah-Hartman
2013-04-02 22:49 ` [ 31/56] KVM: x86: invalid opcode oops on SET_SREGS with OSXSAVE bit set (CVE-2012-4461) Greg Kroah-Hartman
2013-04-02 22:49 ` [ 32/56] loop: prevent bdev freeing while device in use Greg Kroah-Hartman
2013-04-02 22:50 ` [ 33/56] nfsd4: reject "negative" acl lengths Greg Kroah-Hartman
2013-04-02 22:50 ` [ 34/56] drm/i915: dont set unpin_work if vblank_get fails Greg Kroah-Hartman
2013-04-02 22:50 ` [ 35/56] drm/i915: Dont clobber crtc->fb when queue_flip fails Greg Kroah-Hartman
2013-04-02 22:50 ` [ 36/56] efivars: explicitly calculate length of VariableName Greg Kroah-Hartman
2013-04-02 22:50 ` [ 37/56] efivars: Handle duplicate names from get_next_variable() Greg Kroah-Hartman
2013-04-02 22:50 ` [ 38/56] ext4: use atomic64_t for the per-flexbg free_clusters count Greg Kroah-Hartman
2013-04-02 22:50 ` [ 39/56] tracing: Protect tracer flags with trace_types_lock Greg Kroah-Hartman
2013-04-02 22:50 ` [ 40/56] tracing: Prevent buffer overwrite disabled for latency tracers Greg Kroah-Hartman
2013-04-02 22:50 ` [ 41/56] sky2: Receive Overflows not counted Greg Kroah-Hartman
2013-04-02 22:50 ` [ 42/56] sky2: Threshold for Pause Packet is set wrong Greg Kroah-Hartman
2013-04-02 22:50 ` [ 43/56] tcp: preserve ACK clocking in TSO Greg Kroah-Hartman
2013-04-02 22:50 ` [ 44/56] tcp: undo spurious timeout after SACK reneging Greg Kroah-Hartman
2013-04-02 22:50 ` [ 45/56] 8021q: fix a potential use-after-free Greg Kroah-Hartman
2013-04-02 22:50 ` [ 46/56] thermal: shorten too long mcast group name Greg Kroah-Hartman
2013-04-02 22:50 ` [ 47/56] unix: fix a race condition in unix_release() Greg Kroah-Hartman
2013-04-02 22:50 ` [ 48/56] aoe: reserve enough headroom on skbs Greg Kroah-Hartman
2013-04-02 22:50 ` [ 49/56] drivers: net: ethernet: davinci_emac: use netif_wake_queue() while restarting tx queue Greg Kroah-Hartman
2013-04-02 22:50 ` [ 50/56] atl1e: drop pci-msi support because of packet corruption Greg Kroah-Hartman
2013-04-02 22:50 ` [ 51/56] ipv6: fix bad free of addrconf_init_net Greg Kroah-Hartman
2013-04-02 22:50 ` [ 52/56] ks8851: Fix interpretation of rxlen field Greg Kroah-Hartman
2013-04-02 22:50 ` [ 53/56] net: add a synchronize_net() in netdev_rx_handler_unregister() Greg Kroah-Hartman
2013-04-02 22:50 ` [ 54/56] pch_gbe: fix ip_summed checksum reporting on rx Greg Kroah-Hartman
2013-04-02 22:50 ` [ 55/56] smsc75xx: fix jumbo frame support Greg Kroah-Hartman
2013-04-02 22:50 ` [ 56/56] iommu/amd: Make sure dma_ops are set for hotplug devices Greg Kroah-Hartman
2013-04-03 15:19 ` [ 00/56] 3.0.72-stable review Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130402224712.465445368@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=gustavo.padovan@collabora.co.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=ming.lei@canonical.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).