From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Bryan Schumaker <bjschuma@netapp.com>,
"J. Bruce Fields" <bfields@redhat.com>
Subject: [ 50/63] nfsd: Decode and send 64bit time values
Date: Mon, 6 May 2013 15:56:28 -0700 [thread overview]
Message-ID: <20130506225326.889305800@linuxfoundation.org> (raw)
In-Reply-To: <20130506225314.802167948@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bryan Schumaker <bjschuma@netapp.com>
commit bf8d909705e9d9bac31d9b8eac6734d2b51332a7 upstream.
The seconds field of an nfstime4 structure is 64bit, but we are assuming
that the first 32bits are zero-filled. So if the client tries to set
atime to a value before the epoch (touch -t 196001010101), then the
server will save the wrong value on disk.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfsd/nfs4xdr.c | 19 +++++--------------
1 file changed, 5 insertions(+), 14 deletions(-)
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -343,10 +343,7 @@ nfsd4_decode_fattr(struct nfsd4_compound
all 32 bits of 'nseconds'. */
READ_BUF(12);
len += 12;
- READ32(dummy32);
- if (dummy32)
- return nfserr_inval;
- READ32(iattr->ia_atime.tv_sec);
+ READ64(iattr->ia_atime.tv_sec);
READ32(iattr->ia_atime.tv_nsec);
if (iattr->ia_atime.tv_nsec >= (u32)1000000000)
return nfserr_inval;
@@ -369,10 +366,7 @@ nfsd4_decode_fattr(struct nfsd4_compound
all 32 bits of 'nseconds'. */
READ_BUF(12);
len += 12;
- READ32(dummy32);
- if (dummy32)
- return nfserr_inval;
- READ32(iattr->ia_mtime.tv_sec);
+ READ64(iattr->ia_mtime.tv_sec);
READ32(iattr->ia_mtime.tv_nsec);
if (iattr->ia_mtime.tv_nsec >= (u32)1000000000)
return nfserr_inval;
@@ -2371,8 +2365,7 @@ out_acl:
if (bmval1 & FATTR4_WORD1_TIME_ACCESS) {
if ((buflen -= 12) < 0)
goto out_resource;
- WRITE32(0);
- WRITE32(stat.atime.tv_sec);
+ WRITE64((s64)stat.atime.tv_sec);
WRITE32(stat.atime.tv_nsec);
}
if (bmval1 & FATTR4_WORD1_TIME_DELTA) {
@@ -2385,15 +2378,13 @@ out_acl:
if (bmval1 & FATTR4_WORD1_TIME_METADATA) {
if ((buflen -= 12) < 0)
goto out_resource;
- WRITE32(0);
- WRITE32(stat.ctime.tv_sec);
+ WRITE64((s64)stat.ctime.tv_sec);
WRITE32(stat.ctime.tv_nsec);
}
if (bmval1 & FATTR4_WORD1_TIME_MODIFY) {
if ((buflen -= 12) < 0)
goto out_resource;
- WRITE32(0);
- WRITE32(stat.mtime.tv_sec);
+ WRITE64((s64)stat.mtime.tv_sec);
WRITE32(stat.mtime.tv_nsec);
}
if (bmval1 & FATTR4_WORD1_MOUNTED_ON_FILEID) {
next prev parent reply other threads:[~2013-05-06 22:56 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-06 22:55 [ 00/63] 3.4.44-stable review Greg Kroah-Hartman
2013-05-06 22:55 ` [ 01/63] USB: serial: option: Added support Olivetti Olicard 145 Greg Kroah-Hartman
2013-05-06 22:55 ` [ 02/63] USB: option: add a D-Link DWM-156 variant Greg Kroah-Hartman
2013-05-06 22:55 ` [ 03/63] ARM: at91: Fix typo in restart code panic message Greg Kroah-Hartman
2013-05-06 22:55 ` [ 04/63] powerpc: Add isync to copy_and_flush Greg Kroah-Hartman
2013-05-06 22:55 ` [ 05/63] powerpc/spufs: Initialise inode->i_ino in spufs_new_inode() Greg Kroah-Hartman
2013-05-06 22:55 ` [ 06/63] mwifiex: Use pci_release_region() instead of a pci_release_regions() Greg Kroah-Hartman
2013-05-06 22:55 ` [ 07/63] mwifiex: Call pci_release_region after calling pci_disable_device Greg Kroah-Hartman
2013-05-06 22:55 ` [ 08/63] usb/misc/appledisplay: Add 24" LED Cinema display Greg Kroah-Hartman
2013-05-06 22:55 ` [ 09/63] USB: add ftdi_sio USB ID for GDM Boost V1.x Greg Kroah-Hartman
2013-05-06 22:55 ` [ 10/63] USB: ftdi_sio: correct ST Micro Connect Lite PIDs Greg Kroah-Hartman
2013-05-06 22:55 ` [ 11/63] usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl ep Greg Kroah-Hartman
2013-05-06 22:55 ` [ 12/63] usb-storage: CY7C68300A chips do not support Cypress ATACB Greg Kroah-Hartman
2013-05-06 22:55 ` [ 13/63] s390/memory hotplug: prevent offline of active memory increments Greg Kroah-Hartman
2013-05-06 22:55 ` [ 14/63] xen/time: Fix kasprintf splat when allocating timer%d IRQ line Greg Kroah-Hartman
2013-05-06 22:55 ` [ 15/63] serial_core.c: add put_device() after device_find_child() Greg Kroah-Hartman
2013-05-06 22:55 ` [ 16/63] arm: set the page table freeing ceiling to TASK_SIZE Greg Kroah-Hartman
2013-05-06 22:55 ` [ 17/63] gianfar: do not advertise any alarm capability Greg Kroah-Hartman
2013-05-06 22:55 ` [ 18/63] tty: fix up atime/mtime mess, take three Greg Kroah-Hartman
2013-05-06 22:55 ` [ 19/63] fbcon: when font is freed, clear also vc_font.data Greg Kroah-Hartman
2013-05-06 22:55 ` [ 20/63] tracing: Use stack of calling function for stack tracer Greg Kroah-Hartman
2013-05-06 22:55 ` [ 21/63] tracing: Fix stack tracer with fentry use Greg Kroah-Hartman
2013-05-06 22:56 ` [ 22/63] tracing: Remove most or all of stack tracer stack size from stack_max_size Greg Kroah-Hartman
2013-05-06 22:56 ` [ 23/63] tracing: Fix off-by-one on allocating stat->pages Greg Kroah-Hartman
2013-05-06 22:56 ` [ 24/63] tracing: Check return value of tracing_init_dentry() Greg Kroah-Hartman
2013-05-06 22:56 ` [ 25/63] tracing: Reset ftrace_graph_filter_enabled if count is zero Greg Kroah-Hartman
2013-05-06 22:56 ` [ 26/63] i2c: xiic: must always write 16-bit words to TX_FIFO Greg Kroah-Hartman
2013-05-06 22:56 ` [ 27/63] sysfs: fix use after free in case of concurrent read/write and readdir Greg Kroah-Hartman
2013-05-06 22:56 ` [ 28/63] Fix initialization of CMCI/CMCP interrupts Greg Kroah-Hartman
2013-05-06 22:56 ` [ 29/63] PCI / ACPI: Dont query OSC support with all possible controls Greg Kroah-Hartman
2013-05-06 22:56 ` [ 30/63] PCI/PM: Fix fallback to PCI_D0 in pci_platform_power_transition() Greg Kroah-Hartman
2013-05-06 22:56 ` [ 31/63] Wrong asm register contraints in the futex implementation Greg Kroah-Hartman
2013-05-06 22:56 ` [ 32/63] Wrong asm register contraints in the kvm implementation Greg Kroah-Hartman
2013-05-06 22:56 ` [ 33/63] fs/fscache/stats.c: fix memory leak Greg Kroah-Hartman
2013-05-06 22:56 ` [ 34/63] mm: allow arch code to control the user page table ceiling Greg Kroah-Hartman
2013-05-06 22:56 ` [ 35/63] ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINT Greg Kroah-Hartman
2013-05-06 22:56 ` [ 36/63] ALSA: usb-audio: disable autopm for MIDI devices Greg Kroah-Hartman
2013-05-06 22:56 ` [ 37/63] ALSA: usb-audio: Fix autopm error during probing Greg Kroah-Hartman
2013-05-06 22:56 ` [ 38/63] ARM: 7702/1: Set the page table freeing ceiling to TASK_SIZE Greg Kroah-Hartman
2013-05-06 22:56 ` [ 39/63] ASoC: max98088: Fix logging of hardware revision Greg Kroah-Hartman
2013-05-06 22:56 ` [ 40/63] hrtimer: Fix ktime_add_ns() overflow on 32bit architectures Greg Kroah-Hartman
2013-05-06 22:56 ` [ 41/63] hrtimer: Add expiry time overflow check in hrtimer_interrupt Greg Kroah-Hartman
2013-05-06 22:56 ` [ 42/63] drivers/rtc/rtc-cmos.c: dont disable hpet emulation on suspend Greg Kroah-Hartman
2013-05-06 22:56 ` [ 43/63] cgroup: fix an off-by-one bug which may trigger BUG_ON() Greg Kroah-Hartman
2013-05-06 22:56 ` [ 44/63] clockevents: Set dummy handler on CPU_DEAD shutdown Greg Kroah-Hartman
2013-05-06 22:56 ` [ 45/63] fs/dcache.c: add cond_resched() to shrink_dcache_parent() Greg Kroah-Hartman
2013-05-06 22:56 ` [ 46/63] LOCKD: Ensure that nlmclnt_block resets block->b_status after a server reboot Greg Kroah-Hartman
2013-05-06 22:56 ` [ 47/63] md: bad block list should default to disabled Greg Kroah-Hartman
2013-05-06 22:56 ` [ 48/63] NFSv4: Handle NFS4ERR_DELAY and NFS4ERR_GRACE in nfs4_open_delegation_recall Greg Kroah-Hartman
2013-05-06 22:56 ` [ 49/63] nfsd4: dont close read-write opens too soon Greg Kroah-Hartman
2013-05-06 22:56 ` Greg Kroah-Hartman [this message]
2013-05-06 22:56 ` [ 51/63] wireless: regulatory: fix channel disabling race condition Greg Kroah-Hartman
2013-05-06 22:56 ` [ 52/63] ipc: sysv shared memory limited to 8TiB Greg Kroah-Hartman
2013-05-06 22:56 ` [ 53/63] ixgbe: fix EICR write in ixgbe_msix_other Greg Kroah-Hartman
2013-05-06 22:56 ` [ 54/63] jbd2: fix race between jbd2_journal_remove_checkpoint and ->j_commit_callback Greg Kroah-Hartman
2013-05-06 22:56 ` [ 55/63] ext4: fix journal callback list traversal Greg Kroah-Hartman
2013-05-06 22:56 ` [ 56/63] ext4: fix online resizing for ext3-compat file systems Greg Kroah-Hartman
2013-05-06 22:56 ` [ 57/63] ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUG Greg Kroah-Hartman
2013-05-06 22:56 ` [ 58/63] mmc: at91/avr32/atmel-mci: fix DMA-channel leak on module unload Greg Kroah-Hartman
2013-05-06 22:56 ` [ 59/63] KVM: X86 emulator: fix source operand decoding for 8bit mov[zs]x instructions Greg Kroah-Hartman
2013-05-06 22:56 ` [ 60/63] x86: Eliminate irq_mis_count counted in arch_irq_stat Greg Kroah-Hartman
2013-05-06 22:56 ` [ 61/63] mmc: core: Fix bit width test failing on old eMMC cards Greg Kroah-Hartman
2013-05-06 22:56 ` [ 62/63] mmc: atmel-mci: pio hang on block errors Greg Kroah-Hartman
2013-05-06 22:56 ` [ 63/63] mfd: adp5520: Restore mode bits on resume Greg Kroah-Hartman
[not found] ` <CAKocOOOxtJMoqWVgPLcrCJZ0kJuJ-QF0vQEU6Vk70n4J=+9ttw@mail.gmail.com>
2013-05-07 19:20 ` [ 00/63] 3.4.44-stable review Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130506225326.889305800@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=bfields@redhat.com \
--cc=bjschuma@netapp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox