From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Paul Taysom <taysom@chromium.org>,
Tyler Hicks <tyhicks@canonical.com>
Subject: [ 50/79] ecryptfs: fixed msync to flush data
Date: Tue, 11 Jun 2013 13:03:16 -0700 [thread overview]
Message-ID: <20130611195322.669669204@linuxfoundation.org> (raw)
In-Reply-To: <20130611195312.352656079@linuxfoundation.org>
3.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Taysom <taysom@chromium.org>
commit c15cddd900e867c5adfb3c79596479dc5975f743 upstream.
When msync is called on a memory mapped file, that
data is not flushed to the disk.
In Linux, msync calls fsync for the file. For ecryptfs,
fsync just calls the lower level file system's fsync.
Changed the ecryptfs fsync code to call filemap_write_and_wait
before calling the lower level fsync.
Addresses the problem described in http://crbug.com/239536
Signed-off-by: Paul Taysom <taysom@chromium.org>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ecryptfs/file.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -294,6 +294,7 @@ static int ecryptfs_release(struct inode
static int
ecryptfs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
{
+ filemap_write_and_wait(file->f_mapping);
return vfs_fsync(ecryptfs_file_to_lower(file), datasync);
}
next prev parent reply other threads:[~2013-06-11 20:03 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-11 20:02 [ 00/79] 3.9.6-stable review Greg Kroah-Hartman
2013-06-11 20:02 ` [ 01/79] USB: serial: Add Option GTM681W to qcserial device table Greg Kroah-Hartman
2013-06-11 20:02 ` [ 02/79] USB: option: blacklist network interface on Huawei E1820 Greg Kroah-Hartman
2013-06-11 20:02 ` [ 03/79] USB: option,zte_ev: move most ZTE CDMA devices to zte_ev Greg Kroah-Hartman
2013-06-11 20:02 ` [ 04/79] usb: dwc3: pci: PHY should be deleted later than dwc3 core Greg Kroah-Hartman
2013-06-11 20:02 ` [ 05/79] xhci - correct comp_mode_recovery_timer on return from hibernate Greg Kroah-Hartman
2013-06-11 20:02 ` [ 06/79] xhci-mem: init list heads at the beginning of init Greg Kroah-Hartman
2013-06-11 20:02 ` [ 07/79] xhci: fix list access before init Greg Kroah-Hartman
2013-06-11 20:02 ` [ 08/79] xhci: Disable D3cold for buggy TI redrivers Greg Kroah-Hartman
2013-06-11 20:02 ` [ 09/79] x86/PCI: Map PCI setup data with ioremap() so it can be in highmem Greg Kroah-Hartman
2013-06-11 20:02 ` [ 10/79] usb: musb: make use_sg flag URB specific Greg Kroah-Hartman
2013-06-11 20:02 ` [ 11/79] ALSA: usb-audio: fix Roland/Cakewalk UM-3G support Greg Kroah-Hartman
2013-06-11 20:02 ` [ 12/79] ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface Greg Kroah-Hartman
2013-06-11 20:02 ` [ 13/79] ALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270 Greg Kroah-Hartman
2013-06-11 20:02 ` [ 14/79] USB: iuu_phoenix: fix bulk-message timeout Greg Kroah-Hartman
2013-06-11 20:02 ` [ 15/79] USB: keyspan: fix bogus array index Greg Kroah-Hartman
2013-06-11 20:02 ` [ 16/79] USB: ark3116: fix control-message timeout Greg Kroah-Hartman
2013-06-11 20:02 ` [ 17/79] USB: visor: fix initialisation of Treo/Kyocera devices Greg Kroah-Hartman
2013-06-11 20:02 ` [ 18/79] USB: zte_ev: fix control-message timeouts Greg Kroah-Hartman
2013-06-11 20:02 ` [ 19/79] USB: zte_ev: fix broken open Greg Kroah-Hartman
2013-06-11 20:02 ` [ 20/79] USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device Greg Kroah-Hartman
2013-06-11 20:02 ` [ 21/79] USB: whiteheat: fix broken port configuration Greg Kroah-Hartman
2013-06-11 20:02 ` [ 22/79] USB: serial: fix Treo/Kyocera interrrupt-in urb context Greg Kroah-Hartman
2013-06-11 20:02 ` [ 23/79] USB: revert periodic scheduling bugfix Greg Kroah-Hartman
2013-06-11 20:02 ` [ 24/79] USB: mos7840: fix DMA to stack Greg Kroah-Hartman
2013-06-11 20:02 ` [ 25/79] USB: mos7720: " Greg Kroah-Hartman
2013-06-11 20:02 ` [ 26/79] USB: mos7720: fix message timeouts Greg Kroah-Hartman
2013-06-11 20:02 ` [ 27/79] USB: mos7720: fix hardware flow control Greg Kroah-Hartman
2013-06-11 20:02 ` [ 28/79] acpi-cpufreq: set current frequency based on target P-State Greg Kroah-Hartman
2013-06-11 20:02 ` [ 29/79] ACPI / video: ignore BIOS initial backlight value for HP m4 Greg Kroah-Hartman
2013-06-11 20:02 ` [ 30/79] ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6 Greg Kroah-Hartman
2013-06-11 20:02 ` [ 31/79] ACPI / scan: do not match drivers against objects having scan handlers Greg Kroah-Hartman
2013-06-11 20:02 ` [ 32/79] ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization Greg Kroah-Hartman
2013-06-11 20:02 ` [ 33/79] x86 / platform / hp_wmi: Fix bluetooth_rfkill misuse in hp_wmi_rfkill_setup() Greg Kroah-Hartman
2013-06-11 20:03 ` [ 34/79] ALSA: hda/via - Disable broken dynamic power control Greg Kroah-Hartman
2013-06-11 20:03 ` [ 35/79] ALSA: hda/via - Fix wrongly cleared pins after suspend on VT1802 Greg Kroah-Hartman
2013-06-11 20:03 ` [ 36/79] ALSA: hda - Allow setting automute/automic hooks after parsing Greg Kroah-Hartman
2013-06-11 20:03 ` [ 37/79] ALSA: hda - Add keep_eapd_on flag to generic parser Greg Kroah-Hartman
2013-06-11 20:03 ` [ 38/79] ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation Greg Kroah-Hartman
2013-06-11 20:03 ` [ 39/79] ARM: 7742/1: topology: export cpu_topology Greg Kroah-Hartman
2013-06-11 20:03 ` [ 40/79] ARM: 7743/1: compressed/head.S: work around new binutils warning Greg Kroah-Hartman
2013-06-11 20:03 ` [ 41/79] ARM: 7747/1: pcpu: ensure __my_cpu_offset cannot be re-ordered across barrier() Greg Kroah-Hartman
2013-06-11 20:03 ` [ 42/79] powerpc/eeh: Dont check RTAS token to get PE addr Greg Kroah-Hartman
2013-06-11 20:03 ` [ 43/79] powerpc/hw_breakpoints: Add DABRX cpu feature to fix 32-bit regression Greg Kroah-Hartman
2013-06-11 20:03 ` [ 44/79] powerpc/perf: Fix deadlock caused by calling printk() in PMU exception Greg Kroah-Hartman
2013-06-11 20:03 ` [ 45/79] dmaengine: ste_dma40: fix pm runtime ref counting Greg Kroah-Hartman
2013-06-11 20:03 ` [ 46/79] radeon: Fix system hang issue when using KMS with older cards Greg Kroah-Hartman
2013-06-11 20:03 ` [ 47/79] drm/radeon: dont allow audio on DCE6 Greg Kroah-Hartman
2013-06-11 20:03 ` [ 48/79] hpfs: fix warnings when the filesystem fills up Greg Kroah-Hartman
2013-06-11 20:03 ` [ 49/79] cifs: fix off-by-one bug in build_unc_path_to_root Greg Kroah-Hartman
2013-06-11 20:03 ` Greg Kroah-Hartman [this message]
2013-06-11 20:03 ` [ 51/79] eCryptfs: Check return of filemap_write_and_wait during fsync Greg Kroah-Hartman
2013-06-11 20:03 ` [ 52/79] hwmon: (adm1021) Strengthen chip detection for ADM1021, LM84 and MAX1617 Greg Kroah-Hartman
2013-06-11 20:03 ` [ 53/79] drm/mgag200: Add missing write to index before accessing data register Greg Kroah-Hartman
2013-06-11 20:03 ` [ 54/79] drm: fix a use-after-free when GPU acceleration disabled Greg Kroah-Hartman
2013-06-11 20:03 ` [ 55/79] drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC Greg Kroah-Hartman
2013-06-11 20:03 ` [ 56/79] drm/i915: no lvds quirk for hp t5740 Greg Kroah-Hartman
2013-06-11 20:03 ` [ 57/79] drm/i915: Fix spurious -EIO/SIGBUS on wedged gpus Greg Kroah-Hartman
2013-06-11 20:03 ` [ 58/79] Revert "ACPI / scan: do not match drivers against objects having scan handlers" Greg Kroah-Hartman
2013-06-11 20:03 ` [ 59/79] powerpc: Fix build error in stable/3.9 Greg Kroah-Hartman
2013-06-11 20:03 ` [ 60/79] usb: dwc3: gadget: free trb pool only from epnum 2 Greg Kroah-Hartman
2013-06-11 20:03 ` [ 61/79] drm/gma500: Increase max resolution for mode setting Greg Kroah-Hartman
2013-06-11 20:03 ` [ 62/79] pci: Set dev->dev.type in alloc_pci_dev Greg Kroah-Hartman
2013-06-11 20:03 ` [ 63/79] powerpc: Set default VGA device Greg Kroah-Hartman
2013-06-11 20:03 ` [ 64/79] powerpc/pseries: Force 32 bit MSIs for devices that require it Greg Kroah-Hartman
2013-06-11 20:03 ` [ 65/79] powerpc/pseries: Make 32-bit MSI quirk work on systems lacking firmware support Greg Kroah-Hartman
2013-06-12 17:19 ` Kleber Sacilotto de Souza
2013-06-11 20:03 ` [ 66/79] powerpc/pseries: Perform proper max_bus_speed detection Greg Kroah-Hartman
2013-06-11 20:03 ` [ 67/79] radeon: use max_bus_speed to activate gen2 speeds Greg Kroah-Hartman
2013-06-11 20:03 ` [ 68/79] iio:inkern: Fix typo/bug in convert raw to processed Greg Kroah-Hartman
2013-06-11 20:03 ` [ 69/79] iio: frequency: ad4350: Fix bug / typo in mask Greg Kroah-Hartman
2013-06-11 20:03 ` [ 70/79] drm/i915: force full modeset if the connector is in DPMS OFF mode Greg Kroah-Hartman
2013-06-11 20:03 ` [ 71/79] USB: serial: add wait_until_sent operation Greg Kroah-Hartman
2013-06-11 20:03 ` [ 72/79] USB: serial: add generic wait_until_sent implementation Greg Kroah-Hartman
2013-06-11 20:03 ` [ 73/79] USB: ftdi_sio: clean up get_modem_status Greg Kroah-Hartman
2013-06-11 20:03 ` [ 74/79] USB: ftdi_sio: fix chars_in_buffer overhead Greg Kroah-Hartman
2013-06-11 20:03 ` [ 75/79] USB: io_ti: " Greg Kroah-Hartman
2013-06-11 20:03 ` [ 76/79] Fix lockup related to stop_machine being stuck in __do_softirq Greg Kroah-Hartman
2013-06-11 20:03 ` [ 77/79] xen/smp: Fixup NOHZ per cpu data when onlining an offline CPU Greg Kroah-Hartman
2013-06-11 20:03 ` [ 78/79] timekeeping: Correct run-time detection of persistent_clock Greg Kroah-Hartman
2013-06-11 20:03 ` [ 79/79] s390: Add pgste to ptep_modify_prot_start() Greg Kroah-Hartman
2013-06-12 14:06 ` [ 00/79] 3.9.6-stable review Guenter Roeck
2013-06-12 14:15 ` Josh Boyer
2013-06-12 14:21 ` Guenter Roeck
2013-06-12 15:49 ` Shuah Khan
2013-06-12 16:58 ` Greg Kroah-Hartman
2013-06-12 20:29 ` Guenter Roeck
2013-06-12 20:34 ` Guenter Roeck
2013-06-12 20:53 ` Kleber Sacilotto de Souza
2013-06-13 17:41 ` Greg Kroah-Hartman
2013-06-13 17:45 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130611195322.669669204@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=taysom@chromium.org \
--cc=tyhicks@canonical.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).