From: Greg Kroah-Hartman <greg@kroah.com>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Jim Schutt <jaschut@sandia.gov>,
Alex Elder <elder@inktank.com>
Subject: [ 05/48] ceph: add cpu_to_le32() calls when encoding a reconnect capability
Date: Tue, 18 Jun 2013 09:17:31 -0700 [thread overview]
Message-ID: <20130618161726.669061235@linuxfoundation.org> (raw)
In-Reply-To: <20130618161725.912524266@linuxfoundation.org>
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jim Schutt <jaschut@sandia.gov>
commit c420276a532a10ef59849adc2681f45306166b89 upstream.
In his review, Alex Elder mentioned that he hadn't checked that
num_fcntl_locks and num_flock_locks were properly decoded on the
server side, from a le32 over-the-wire type to a cpu type.
I checked, and AFAICS it is done; those interested can consult
Locker::_do_cap_update()
in src/mds/Locker.cc and src/include/encoding.h in the Ceph server
code (git://github.com/ceph/ceph).
I also checked the server side for flock_len decoding, and I believe
that also happens correctly, by virtue of having been declared
__le32 in struct ceph_mds_cap_reconnect, in src/include/ceph_fs.h.
Signed-off-by: Jim Schutt <jaschut@sandia.gov>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/ceph/locks.c | 7 +++++--
fs/ceph/mds_client.c | 2 +-
2 files changed, 6 insertions(+), 3 deletions(-)
--- a/fs/ceph/locks.c
+++ b/fs/ceph/locks.c
@@ -206,10 +206,12 @@ int ceph_encode_locks(struct inode *inod
int err = 0;
int seen_fcntl = 0;
int seen_flock = 0;
+ __le32 nlocks;
dout("encoding %d flock and %d fcntl locks", num_flock_locks,
num_fcntl_locks);
- err = ceph_pagelist_append(pagelist, &num_fcntl_locks, sizeof(u32));
+ nlocks = cpu_to_le32(num_fcntl_locks);
+ err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks));
if (err)
goto fail;
for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) {
@@ -229,7 +231,8 @@ int ceph_encode_locks(struct inode *inod
goto fail;
}
- err = ceph_pagelist_append(pagelist, &num_flock_locks, sizeof(u32));
+ nlocks = cpu_to_le32(num_flock_locks);
+ err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks));
if (err)
goto fail;
for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) {
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -2481,7 +2481,7 @@ static int encode_caps_cb(struct inode *
lock_flocks();
ceph_count_locks(inode, &num_fcntl_locks,
&num_flock_locks);
- rec.v2.flock_len = (2*sizeof(u32) +
+ rec.v2.flock_len = cpu_to_le32(2*sizeof(u32) +
(num_fcntl_locks+num_flock_locks) *
sizeof(struct ceph_filelock));
unlock_flocks();
next prev parent reply other threads:[~2013-06-18 16:17 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-18 16:17 [ 00/48] 3.9.7-stable review Greg Kroah-Hartman
2013-06-18 16:17 ` [ 01/48] audit: wait_for_auditd() should use TASK_UNINTERRUPTIBLE Greg Kroah-Hartman
2013-06-18 16:17 ` [ 02/48] b43: stop format string leaking into error msgs Greg Kroah-Hartman
2013-06-18 16:17 ` [ 03/48] ACPI / video: Do not bind to device objects with a scan handler Greg Kroah-Hartman
2013-06-18 16:17 ` [ 04/48] libceph: must hold mutex for reset_changed_osds() Greg Kroah-Hartman
2013-06-18 16:17 ` Greg Kroah-Hartman [this message]
2013-06-18 16:17 ` [ 06/48] ceph: ceph_pagelist_append might sleep while atomic Greg Kroah-Hartman
2013-06-18 16:17 ` [ 07/48] rbd: dont destroy ceph_opts in rbd_add() Greg Kroah-Hartman
2013-06-18 16:17 ` [ 08/48] drivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with device tree Greg Kroah-Hartman
2013-06-18 16:17 ` [ 09/48] drm/gma500/psb: Unpin framebuffer on crtc disable Greg Kroah-Hartman
2013-06-18 16:17 ` [ 10/48] drm/gma500/cdv: " Greg Kroah-Hartman
2013-06-18 16:17 ` [ 11/48] Bluetooth: Fix missing length checks for L2CAP signalling PDUs Greg Kroah-Hartman
2013-06-18 16:17 ` [ 12/48] Bluetooth: Fix mgmt handling of power on failures Greg Kroah-Hartman
2013-06-18 16:17 ` [ 13/48] s390/pci: Implement IRQ functions if !PCI Greg Kroah-Hartman
2013-06-18 17:35 ` Ben Hutchings
2013-06-18 17:42 ` Greg Kroah-Hartman
2013-06-18 21:35 ` Ben Hutchings
2013-06-19 7:09 ` Martin Schwidefsky
2013-06-20 19:21 ` Greg Kroah-Hartman
2013-06-18 16:17 ` [ 14/48] ath9k: Disable PowerSave by default Greg Kroah-Hartman
2013-06-18 16:17 ` [ 15/48] Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity" Greg Kroah-Hartman
2013-06-18 16:17 ` [ 16/48] ath9k: Use minstrel rate control by default Greg Kroah-Hartman
2013-06-18 16:17 ` [ 17/48] CPU hotplug: provide a generic helper to disable/enable CPU hotplug Greg Kroah-Hartman
2013-06-18 16:17 ` [ 18/48] reboot: rigrate shutdown/reboot to boot cpu Greg Kroah-Hartman
2013-06-18 16:17 ` [ 19/48] kmsg: honor dmesg_restrict sysctl on /dev/kmsg Greg Kroah-Hartman
2013-06-18 16:17 ` [ 20/48] cciss: fix broken mutex usage in ioctl Greg Kroah-Hartman
2013-06-18 16:17 ` [ 21/48] memcg: dont initialize kmem-cache destroying work for root caches Greg Kroah-Hartman
2013-06-18 16:17 ` [ 22/48] wl12xx: fix minimum required firmware version for wl127x multirole Greg Kroah-Hartman
2013-06-18 16:17 ` [ 23/48] drm/i915: prefer VBT modes for SVDO-LVDS over EDID Greg Kroah-Hartman
2013-06-18 16:17 ` [ 24/48] swap: avoid read_swap_cache_async() race to deadlock while waiting on discard I/O completion Greg Kroah-Hartman
2013-06-18 16:17 ` [ 25/48] md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it Greg Kroah-Hartman
2013-06-18 16:17 ` [ 26/48] md/raid1,5,10: Disable WRITE SAME until a recovery strategy is in place Greg Kroah-Hartman
2013-06-18 16:17 ` [ 27/48] md/raid1,raid10: use freeze_array in place of raise_barrier in various places Greg Kroah-Hartman
2013-06-18 16:17 ` [ 28/48] mm/page_alloc.c: fix watermark check in __zone_watermark_ok() Greg Kroah-Hartman
2013-06-18 16:17 ` [ 29/48] mm: migration: add migrate_entry_wait_huge() Greg Kroah-Hartman
2013-06-20 9:52 ` Satoru Takeuchi
2013-06-20 17:02 ` Greg Kroah-Hartman
2013-06-21 11:42 ` Satoru Takeuchi
2013-06-21 12:47 ` Michal Hocko
2013-06-21 22:56 ` Satoru Takeuchi
2013-06-22 12:28 ` Satoru Takeuchi
2013-06-27 18:48 ` Naoya Horiguchi
2013-06-18 16:17 ` [ 30/48] x86: Fix adjust_range_size_mask calling position Greg Kroah-Hartman
2013-06-18 16:17 ` [ 31/48] x86: Fix typo in kexec register clearing Greg Kroah-Hartman
2013-06-18 16:17 ` [ 32/48] drm/nv50/disp: force dac power state during load detect Greg Kroah-Hartman
2013-06-18 16:17 ` [ 33/48] drm/nv50/kms: use dac loadval from vbios, where its available Greg Kroah-Hartman
2013-06-18 16:18 ` [ 34/48] libceph: clear messenger auth_retry flag when we authenticate Greg Kroah-Hartman
2013-06-18 16:18 ` [ 35/48] libceph: fix authorizer invalidation Greg Kroah-Hartman
2013-06-18 16:18 ` [ 36/48] libceph: add update_authorizer auth method Greg Kroah-Hartman
2013-06-18 16:18 ` [ 37/48] libceph: wrap auth ops in wrapper functions Greg Kroah-Hartman
2013-06-18 16:18 ` [ 38/48] libceph: wrap auth methods in a mutex Greg Kroah-Hartman
2013-06-18 16:18 ` [ 39/48] Modify UEFI anti-bricking code Greg Kroah-Hartman
2013-06-18 16:18 ` [ 40/48] powerpc: Fix stack overflow crash in resume_kernel when ftracing Greg Kroah-Hartman
2013-06-18 16:18 ` [ 41/48] powerpc: Fix emulation of illegal instructions on PowerNV platform Greg Kroah-Hartman
2013-06-18 16:18 ` [ 42/48] powerpc: Fix missing/delayed calls to irq_work Greg Kroah-Hartman
2013-06-18 16:18 ` [ 43/48] usb: chipidea: fix id change handling Greg Kroah-Hartman
2013-06-18 16:18 ` [ 44/48] USB: pl2303: fix device initialisation at open Greg Kroah-Hartman
2013-06-18 16:18 ` [ 45/48] USB: f81232: " Greg Kroah-Hartman
2013-06-18 16:18 ` [ 46/48] USB: spcp8x5: " Greg Kroah-Hartman
2013-06-18 16:18 ` [ 47/48] tg3: Wait for boot code to finish after power on Greg Kroah-Hartman
2013-06-18 16:18 ` [ 48/48] ARM: Kirkwood: handle mv88f6282 cpu in __kirkwood_variant() Greg Kroah-Hartman
2013-06-18 21:55 ` [ 00/48] 3.9.7-stable review Shuah Khan
2013-06-18 22:11 ` Greg Kroah-Hartman
2013-06-18 22:58 ` Guenter Roeck
2013-06-18 23:26 ` Greg Kroah-Hartman
2013-06-20 10:02 ` Satoru Takeuchi
2013-06-20 17:01 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130618161726.669061235@linuxfoundation.org \
--to=greg@kroah.com \
--cc=elder@inktank.com \
--cc=gregkh@linuxfoundation.org \
--cc=jaschut@sandia.gov \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).