From: Greg Kroah-Hartman <greg@kroah.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: linux-kernel@vger.kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, stable@vger.kernel.org
Subject: Re: [ 00/48] 3.9.7-stable review
Date: Tue, 18 Jun 2013 16:26:59 -0700 [thread overview]
Message-ID: <20130618232659.GA7716@kroah.com> (raw)
In-Reply-To: <20130618225837.GA30881@roeck-us.net>
On Tue, Jun 18, 2013 at 03:58:37PM -0700, Guenter Roeck wrote:
> On Tue, Jun 18, 2013 at 09:17:26AM -0700, Greg Kroah-Hartman wrote:
> > From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >
> > This is the start of the stable review cycle for the 3.9.7 release.
> > There are 48 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu Jun 20 16:15:42 UTC 2013.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.9.7-rc1.gz
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
> Test build results:
>
> Build reference: v3.9.6-48-g72559a8
>
> Build x86_64:defconfig passed
> Build x86_64:allyesconfig passed
> Build x86_64:allmodconfig passed
> Build x86_64:allnoconfig passed
> Build x86_64:alldefconfig passed
> Build i386:defconfig passed
> Build i386:allyesconfig passed
> Build i386:allmodconfig passed
> Build i386:allnoconfig passed
> Build i386:alldefconfig passed
> Build mips:defconfig passed
> Build mips:bcm47xx_defconfig passed
> Build mips:bcm63xx_defconfig passed
> Build mips:nlm_xlp_defconfig passed
> Build mips:ath79_defconfig passed
> Build mips:ar7_defconfig passed
> Build mips:fuloong2e_defconfig passed
> Build mips:e55_defconfig passed
> Build mips:cavium_octeon_defconfig passed
> Build powerpc:defconfig passed
> Build powerpc:allyesconfig failed
> Build powerpc:allmodconfig passed
> Build powerpc:mpc85xx_defconfig passed
> Build powerpc:mpc85xx_smp_defconfig passed
> Build powerpc:tqm8xx_defconfig passed
> Build powerpc:85xx/sbc8548_defconfig passed
> Build powerpc:83xx/mpc834x_mds_defconfig passed
> Build powerpc:86xx/sbc8641d_defconfig passed
> Build arm:defconfig passed
> Build arm:allyesconfig failed
> Build arm:allmodconfig failed
> Build arm:exynos4_defconfig passed
> Build arm:kirkwood_defconfig passed
> Build arm:omap2plus_defconfig passed
> Build arm:tegra_defconfig passed
> Build arm:u8500_defconfig passed
> Build m68k:defconfig passed
> Build m68k:apollo_defconfig passed
> Build m68k:m5272c3_defconfig failed
> Build m68k:m5307c3_defconfig passed
> Build m68k:mac_defconfig passed
> Build m68k:multi_defconfig passed
> Build m68k:sun3_defconfig passed
> Build m68k:sun3x_defconfig passed
> Build m68k:mvme16x_defconfig passed
> Build m68k:hp300_defconfig passed
>
> -----------------------
> Total builds: 46 Total build errors: 4
>
> Results match the results for v3.9.6.
Thanks for testing and letting me know.
greg k-h
next prev parent reply other threads:[~2013-06-18 23:26 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-18 16:17 [ 00/48] 3.9.7-stable review Greg Kroah-Hartman
2013-06-18 16:17 ` [ 01/48] audit: wait_for_auditd() should use TASK_UNINTERRUPTIBLE Greg Kroah-Hartman
2013-06-18 16:17 ` [ 02/48] b43: stop format string leaking into error msgs Greg Kroah-Hartman
2013-06-18 16:17 ` [ 03/48] ACPI / video: Do not bind to device objects with a scan handler Greg Kroah-Hartman
2013-06-18 16:17 ` [ 04/48] libceph: must hold mutex for reset_changed_osds() Greg Kroah-Hartman
2013-06-18 16:17 ` [ 05/48] ceph: add cpu_to_le32() calls when encoding a reconnect capability Greg Kroah-Hartman
2013-06-18 16:17 ` [ 06/48] ceph: ceph_pagelist_append might sleep while atomic Greg Kroah-Hartman
2013-06-18 16:17 ` [ 07/48] rbd: dont destroy ceph_opts in rbd_add() Greg Kroah-Hartman
2013-06-18 16:17 ` [ 08/48] drivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with device tree Greg Kroah-Hartman
2013-06-18 16:17 ` [ 09/48] drm/gma500/psb: Unpin framebuffer on crtc disable Greg Kroah-Hartman
2013-06-18 16:17 ` [ 10/48] drm/gma500/cdv: " Greg Kroah-Hartman
2013-06-18 16:17 ` [ 11/48] Bluetooth: Fix missing length checks for L2CAP signalling PDUs Greg Kroah-Hartman
2013-06-18 16:17 ` [ 12/48] Bluetooth: Fix mgmt handling of power on failures Greg Kroah-Hartman
2013-06-18 16:17 ` [ 13/48] s390/pci: Implement IRQ functions if !PCI Greg Kroah-Hartman
2013-06-18 17:35 ` Ben Hutchings
2013-06-18 17:42 ` Greg Kroah-Hartman
2013-06-18 21:35 ` Ben Hutchings
2013-06-19 7:09 ` Martin Schwidefsky
2013-06-20 19:21 ` Greg Kroah-Hartman
2013-06-18 16:17 ` [ 14/48] ath9k: Disable PowerSave by default Greg Kroah-Hartman
2013-06-18 16:17 ` [ 15/48] Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity" Greg Kroah-Hartman
2013-06-18 16:17 ` [ 16/48] ath9k: Use minstrel rate control by default Greg Kroah-Hartman
2013-06-18 16:17 ` [ 17/48] CPU hotplug: provide a generic helper to disable/enable CPU hotplug Greg Kroah-Hartman
2013-06-18 16:17 ` [ 18/48] reboot: rigrate shutdown/reboot to boot cpu Greg Kroah-Hartman
2013-06-18 16:17 ` [ 19/48] kmsg: honor dmesg_restrict sysctl on /dev/kmsg Greg Kroah-Hartman
2013-06-18 16:17 ` [ 20/48] cciss: fix broken mutex usage in ioctl Greg Kroah-Hartman
2013-06-18 16:17 ` [ 21/48] memcg: dont initialize kmem-cache destroying work for root caches Greg Kroah-Hartman
2013-06-18 16:17 ` [ 22/48] wl12xx: fix minimum required firmware version for wl127x multirole Greg Kroah-Hartman
2013-06-18 16:17 ` [ 23/48] drm/i915: prefer VBT modes for SVDO-LVDS over EDID Greg Kroah-Hartman
2013-06-18 16:17 ` [ 24/48] swap: avoid read_swap_cache_async() race to deadlock while waiting on discard I/O completion Greg Kroah-Hartman
2013-06-18 16:17 ` [ 25/48] md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it Greg Kroah-Hartman
2013-06-18 16:17 ` [ 26/48] md/raid1,5,10: Disable WRITE SAME until a recovery strategy is in place Greg Kroah-Hartman
2013-06-18 16:17 ` [ 27/48] md/raid1,raid10: use freeze_array in place of raise_barrier in various places Greg Kroah-Hartman
2013-06-18 16:17 ` [ 28/48] mm/page_alloc.c: fix watermark check in __zone_watermark_ok() Greg Kroah-Hartman
2013-06-18 16:17 ` [ 29/48] mm: migration: add migrate_entry_wait_huge() Greg Kroah-Hartman
2013-06-20 9:52 ` Satoru Takeuchi
2013-06-20 17:02 ` Greg Kroah-Hartman
2013-06-21 11:42 ` Satoru Takeuchi
2013-06-21 12:47 ` Michal Hocko
2013-06-21 22:56 ` Satoru Takeuchi
2013-06-22 12:28 ` Satoru Takeuchi
2013-06-27 18:48 ` Naoya Horiguchi
2013-06-18 16:17 ` [ 30/48] x86: Fix adjust_range_size_mask calling position Greg Kroah-Hartman
2013-06-18 16:17 ` [ 31/48] x86: Fix typo in kexec register clearing Greg Kroah-Hartman
2013-06-18 16:17 ` [ 32/48] drm/nv50/disp: force dac power state during load detect Greg Kroah-Hartman
2013-06-18 16:17 ` [ 33/48] drm/nv50/kms: use dac loadval from vbios, where its available Greg Kroah-Hartman
2013-06-18 16:18 ` [ 34/48] libceph: clear messenger auth_retry flag when we authenticate Greg Kroah-Hartman
2013-06-18 16:18 ` [ 35/48] libceph: fix authorizer invalidation Greg Kroah-Hartman
2013-06-18 16:18 ` [ 36/48] libceph: add update_authorizer auth method Greg Kroah-Hartman
2013-06-18 16:18 ` [ 37/48] libceph: wrap auth ops in wrapper functions Greg Kroah-Hartman
2013-06-18 16:18 ` [ 38/48] libceph: wrap auth methods in a mutex Greg Kroah-Hartman
2013-06-18 16:18 ` [ 39/48] Modify UEFI anti-bricking code Greg Kroah-Hartman
2013-06-18 16:18 ` [ 40/48] powerpc: Fix stack overflow crash in resume_kernel when ftracing Greg Kroah-Hartman
2013-06-18 16:18 ` [ 41/48] powerpc: Fix emulation of illegal instructions on PowerNV platform Greg Kroah-Hartman
2013-06-18 16:18 ` [ 42/48] powerpc: Fix missing/delayed calls to irq_work Greg Kroah-Hartman
2013-06-18 16:18 ` [ 43/48] usb: chipidea: fix id change handling Greg Kroah-Hartman
2013-06-18 16:18 ` [ 44/48] USB: pl2303: fix device initialisation at open Greg Kroah-Hartman
2013-06-18 16:18 ` [ 45/48] USB: f81232: " Greg Kroah-Hartman
2013-06-18 16:18 ` [ 46/48] USB: spcp8x5: " Greg Kroah-Hartman
2013-06-18 16:18 ` [ 47/48] tg3: Wait for boot code to finish after power on Greg Kroah-Hartman
2013-06-18 16:18 ` [ 48/48] ARM: Kirkwood: handle mv88f6282 cpu in __kirkwood_variant() Greg Kroah-Hartman
2013-06-18 21:55 ` [ 00/48] 3.9.7-stable review Shuah Khan
2013-06-18 22:11 ` Greg Kroah-Hartman
2013-06-18 22:58 ` Guenter Roeck
2013-06-18 23:26 ` Greg Kroah-Hartman [this message]
2013-06-20 10:02 ` Satoru Takeuchi
2013-06-20 17:01 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130618232659.GA7716@kroah.com \
--to=greg@kroah.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).