public inbox for stable@vger.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org,
	Hannes Frederic Sowa <hannes@stressinduktion.org>,
	Dave Jones <davej@redhat.com>,
	YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>,
	"David S. Miller" <davem@davemloft.net>
Subject: [ 30/59] ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data
Date: Fri, 26 Jul 2013 13:52:54 -0700	[thread overview]
Message-ID: <20130726205017.034802570@linuxfoundation.org> (raw)
In-Reply-To: <20130726205013.795696531@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <hannes@stressinduktion.org>

[ Upstream commit 8822b64a0fa64a5dd1dfcf837c5b0be83f8c05d1 ]

We accidentally call down to ip6_push_pending_frames when uncorking
pending AF_INET data on a ipv6 socket. This results in the following
splat (from Dave Jones):

skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:126!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth
+netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c
CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37
task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000
RIP: 0010:[<ffffffff816e759c>]  [<ffffffff816e759c>] skb_panic+0x63/0x65
RSP: 0018:ffff8801e6431de8  EFLAGS: 00010282
RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006
RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520
RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800
R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800
FS:  00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Stack:
 ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4
 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6
 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0
Call Trace:
 [<ffffffff8159a9aa>] skb_push+0x3a/0x40
 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0
 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140
 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0
 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20
 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0
 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0
 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40
 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20
 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0
 [<ffffffff816f5d54>] tracesys+0xdd/0xe2
Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55
RIP  [<ffffffff816e759c>] skb_panic+0x63/0x65
 RSP <ffff8801e6431de8>

This patch adds a check if the pending data is of address family AF_INET
and directly calls udp_push_ending_frames from udp_v6_push_pending_frames
if that is the case.

This bug was found by Dave Jones with trinity.

(Also move the initialization of fl6 below the AF_INET check, even if
not strictly necessary.)

Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Dave Jones <davej@redhat.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/udp.h |    1 +
 net/ipv4/udp.c    |    3 ++-
 net/ipv6/udp.c    |    7 ++++++-
 3 files changed, 9 insertions(+), 2 deletions(-)

--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -181,6 +181,7 @@ extern int udp_get_port(struct sock *sk,
 extern void udp_err(struct sk_buff *, u32);
 extern int udp_sendmsg(struct kiocb *iocb, struct sock *sk,
 			    struct msghdr *msg, size_t len);
+extern int udp_push_pending_frames(struct sock *sk);
 extern void udp_flush_pending_frames(struct sock *sk);
 extern int udp_rcv(struct sk_buff *skb);
 extern int udp_ioctl(struct sock *sk, int cmd, unsigned long arg);
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -768,7 +768,7 @@ send:
 /*
  * Push out all pending data as one UDP datagram. Socket is locked.
  */
-static int udp_push_pending_frames(struct sock *sk)
+int udp_push_pending_frames(struct sock *sk)
 {
 	struct udp_sock  *up = udp_sk(sk);
 	struct inet_sock *inet = inet_sk(sk);
@@ -787,6 +787,7 @@ out:
 	up->pending = 0;
 	return err;
 }
+EXPORT_SYMBOL(udp_push_pending_frames);
 
 int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 		size_t len)
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -895,11 +895,16 @@ static int udp_v6_push_pending_frames(st
 	struct udphdr *uh;
 	struct udp_sock  *up = udp_sk(sk);
 	struct inet_sock *inet = inet_sk(sk);
-	struct flowi6 *fl6 = &inet->cork.fl.u.ip6;
+	struct flowi6 *fl6;
 	int err = 0;
 	int is_udplite = IS_UDPLITE(sk);
 	__wsum csum = 0;
 
+	if (up->pending == AF_INET)
+		return udp_push_pending_frames(sk);
+
+	fl6 = &inet->cork.fl.u.ip6;
+
 	/* Grab the skbuff where UDP header space exists. */
 	if ((skb = skb_peek(&sk->sk_write_queue)) == NULL)
 		goto out;



  parent reply	other threads:[~2013-07-26 20:52 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-26 20:52 [ 00/59] 3.4.55-stable review Greg Kroah-Hartman
2013-07-26 20:52 ` [ 01/59] ext3: fix data=journal fast mount/umount hang Greg Kroah-Hartman
2013-07-26 20:52 ` [ 02/59] libata: skip SRST for all SIMG [34]7x port-multipliers Greg Kroah-Hartman
2013-07-26 20:52 ` [ 03/59] ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs Greg Kroah-Hartman
2013-07-26 20:52 ` [ 04/59] ASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASK Greg Kroah-Hartman
2013-07-26 20:52 ` [ 05/59] tick: Prevent uncontrolled switch to oneshot mode Greg Kroah-Hartman
2013-07-26 20:52 ` [ 06/59] rt2x00: read 5GHz TX power values from the correct offset Greg Kroah-Hartman
2013-07-26 20:52 ` [ 07/59] ath9k: Do not assign noise for NULL caldata Greg Kroah-Hartman
2013-07-26 20:52 ` [ 08/59] SCSI: zfcp: fix adapter (re)open recovery while link to SAN is down Greg Kroah-Hartman
2013-07-26 20:52 ` [ 09/59] SCSI: mpt2sas: fix firmware failure with wrong task attribute Greg Kroah-Hartman
2013-07-26 20:52 ` [ 10/59] tracing: Use current_uid() for critical time tracing Greg Kroah-Hartman
2013-07-26 20:52 ` [ 11/59] iommu/amd: Only unmap large pages from the first pte Greg Kroah-Hartman
2013-07-26 20:52 ` [ 12/59] perf: Clone child context from parent context pmu Greg Kroah-Hartman
2013-07-26 20:52 ` [ 13/59] perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario Greg Kroah-Hartman
2013-07-26 20:52 ` [ 14/59] perf: Fix perf_lock_task_context() vs RCU Greg Kroah-Hartman
2013-07-26 20:52 ` [ 15/59] sparc32: vm_area_struct access for old Sun SPARCs Greg Kroah-Hartman
2013-07-27 21:45   ` Ben Hutchings
2013-07-28  2:27     ` David Miller
2013-07-28 18:37       ` Greg KH
2013-07-26 20:52 ` [ 16/59] sparc64 address-congruence property Greg Kroah-Hartman
2013-07-26 20:52 ` [ 17/59] sparc: tsb must be flushed before tlb Greg Kroah-Hartman
2013-07-26 20:52 ` [ 18/59] bridge: fix switched interval for MLD Query types Greg Kroah-Hartman
2013-07-26 20:52 ` [ 19/59] ipv4: Fixed MD5 key lookups when adding/ removing MD5 to/ from TCP sockets Greg Kroah-Hartman
2013-07-26 20:52 ` [ 20/59] ipv6: dont call addrconf_dst_alloc again when enable lo Greg Kroah-Hartman
2013-07-26 20:52 ` [ 21/59] macvtap: fix recovery from gup errors Greg Kroah-Hartman
2013-07-26 20:52 ` [ 22/59] ipv6: ip6_sk_dst_check() must not assume ipv6 dst Greg Kroah-Hartman
2013-07-26 20:52 ` [ 23/59] af_key: fix info leaks in notify messages Greg Kroah-Hartman
2013-07-26 20:52 ` [ 24/59] sh_eth: fix unhandled RFE interrupt Greg Kroah-Hartman
2013-07-26 20:52 ` [ 25/59] neighbour: fix a race in neigh_destroy() Greg Kroah-Hartman
2013-07-26 20:52 ` [ 26/59] x25: Fix broken locking in ioctl error paths Greg Kroah-Hartman
2013-07-26 20:52 ` [ 27/59] net: Swap ver and type in pppoe_hdr Greg Kroah-Hartman
2013-07-26 20:52 ` [ 28/59] ipv6,mcast: always hold idev->lock before mca_lock Greg Kroah-Hartman
2013-07-26 20:52 ` [ 29/59] l2tp: add missing .owner to struct pppox_proto Greg Kroah-Hartman
2013-07-26 20:52 ` Greg Kroah-Hartman [this message]
2013-07-26 20:52 ` [ 31/59] ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size Greg Kroah-Hartman
2013-07-26 20:52 ` [ 32/59] sunvnet: vnet_port_remove must call unregister_netdev Greg Kroah-Hartman
2013-07-26 20:52 ` [ 33/59] ifb: fix rcu_sched self-detected stalls Greg Kroah-Hartman
2013-07-26 20:52 ` [ 34/59] macvtap: correctly linearize skb when zerocopy is used Greg Kroah-Hartman
2013-07-26 20:52 ` [ 35/59] ipv6: in case of link failure remove route directly instead of letting it expire Greg Kroah-Hartman
2013-07-26 20:53 ` [ 36/59] 9p: fix off by one causing access violations and memory corruption Greg Kroah-Hartman
2013-07-26 20:53 ` [ 37/59] dummy: fix oops when loading the dummy failed Greg Kroah-Hartman
2013-07-26 20:53 ` [ 38/59] ifb: fix oops when loading the ifb failed Greg Kroah-Hartman
2013-07-26 20:53 ` [ 39/59] atl1e: fix dma mapping warnings Greg Kroah-Hartman
2013-07-26 20:53 ` [ 40/59] atl1e: unmap partially mapped skb on dma error and free skb Greg Kroah-Hartman
2013-07-26 20:53 ` [ 41/59] vlan: fix a race in egress prio management Greg Kroah-Hartman
2013-07-26 20:53 ` [ 42/59] writeback: Fix periodic writeback after fs mount Greg Kroah-Hartman
2013-07-26 20:53 ` [ 43/59] SCSI: megaraid_sas: fix memory leak if SGL has zero length entries Greg Kroah-Hartman
2013-07-26 20:53 ` [ 44/59] SCSI: Fix incorrect memset in bnx2fc_parse_fcp_rsp Greg Kroah-Hartman
2013-07-26 20:53 ` [ 45/59] [SCSI] zfcp: block queue limits with data router Greg Kroah-Hartman
2013-07-26 20:53 ` [ 46/59] usb: serial: option: blacklist ONDA MT689DC QMI interface Greg Kroah-Hartman
2013-07-26 20:53 ` [ 47/59] usb: option: add TP-LINK MA260 Greg Kroah-Hartman
2013-07-26 20:53 ` [ 48/59] usb: serial: option: add Olivetti Olicard 200 Greg Kroah-Hartman
2013-07-26 20:53 ` [ 49/59] usb: serial: option.c: remove ONDA MT825UP product ID fromdriver Greg Kroah-Hartman
2013-07-26 20:53 ` [ 50/59] USB: option: append Petatel NP10T device to GSM modems list Greg Kroah-Hartman
2013-07-26 20:53 ` [ 51/59] USB: option: add D-Link DWM-152/C1 and DWM-156/C1 Greg Kroah-Hartman
2013-07-26 20:53 ` [ 52/59] usb: serial: option: Add ONYX 3G device support Greg Kroah-Hartman
2013-07-26 20:53 ` [ 53/59] usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapter Greg Kroah-Hartman
2013-07-26 20:53 ` [ 54/59] USB: cp210x: add MMB and PI ZigBee USB Device Support Greg Kroah-Hartman
2013-07-26 20:53 ` [ 55/59] usb: cp210x support SEL C662 Vendor/Device Greg Kroah-Hartman
2013-07-26 20:53 ` [ 56/59] lockd: protect nlm_blocked access in nlmsvc_retry_blocked Greg Kroah-Hartman
2013-07-26 20:53 ` [ 57/59] tracing: Fix irqs-off tag display in syscall tracing Greg Kroah-Hartman
2013-07-26 20:53 ` [ 58/59] hrtimers: Move SMP function call to thread context Greg Kroah-Hartman
2013-07-26 20:53 ` [ 59/59] ALSA: usb-audio: 6fire: return correct XRUN indication Greg Kroah-Hartman
2013-07-27 21:28 ` [ 00/59] 3.4.55-stable review linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130726205017.034802570@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=davej@redhat.com \
    --cc=davem@davemloft.net \
    --cc=hannes@stressinduktion.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox