From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Michael Neuling <mikey@neuling.org>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: [ 06/60] powerpc: Rework setting up H/FSCR bit definitions
Date: Mon, 12 Aug 2013 23:33:33 -0700 [thread overview]
Message-ID: <20130813063332.659677725@linuxfoundation.org> (raw)
In-Reply-To: <20130813063331.950321483@linuxfoundation.org>
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Neuling <mikey@neuling.org>
commit 74e400cee6c0266ba2d940ed78d981f1e24a8167 upstream.
This reworks the Facility Status and Control Regsiter (FSCR) config bit
definitions so that we can access the bit numbers. This is needed for a
subsequent patch to fix the userspace DSCR handling.
HFSCR and FSCR bit definitions are the same, so reuse them.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/include/asm/reg.h | 31 ++++++++++++++++++++-----------
1 file changed, 20 insertions(+), 11 deletions(-)
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -254,19 +254,28 @@
#define SPRN_HRMOR 0x139 /* Real mode offset register */
#define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */
#define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */
+/* HFSCR and FSCR bit numbers are the same */
+#define FSCR_TAR_LG 8 /* Enable Target Address Register */
+#define FSCR_EBB_LG 7 /* Enable Event Based Branching */
+#define FSCR_TM_LG 5 /* Enable Transactional Memory */
+#define FSCR_PM_LG 4 /* Enable prob/priv access to PMU SPRs */
+#define FSCR_BHRB_LG 3 /* Enable Branch History Rolling Buffer*/
+#define FSCR_DSCR_LG 2 /* Enable Data Stream Control Register */
+#define FSCR_VECVSX_LG 1 /* Enable VMX/VSX */
+#define FSCR_FP_LG 0 /* Enable Floating Point */
#define SPRN_FSCR 0x099 /* Facility Status & Control Register */
-#define FSCR_TAR (1 << (63-55)) /* Enable Target Address Register */
-#define FSCR_EBB (1 << (63-56)) /* Enable Event Based Branching */
-#define FSCR_DSCR (1 << (63-61)) /* Enable Data Stream Control Register */
+#define FSCR_TAR __MASK(FSCR_TAR_LG)
+#define FSCR_EBB __MASK(FSCR_EBB_LG)
+#define FSCR_DSCR __MASK(FSCR_DSCR_LG)
#define SPRN_HFSCR 0xbe /* HV=1 Facility Status & Control Register */
-#define HFSCR_TAR (1 << (63-55)) /* Enable Target Address Register */
-#define HFSCR_EBB (1 << (63-56)) /* Enable Event Based Branching */
-#define HFSCR_TM (1 << (63-58)) /* Enable Transactional Memory */
-#define HFSCR_PM (1 << (63-60)) /* Enable prob/priv access to PMU SPRs */
-#define HFSCR_BHRB (1 << (63-59)) /* Enable Branch History Rolling Buffer*/
-#define HFSCR_DSCR (1 << (63-61)) /* Enable Data Stream Control Register */
-#define HFSCR_VECVSX (1 << (63-62)) /* Enable VMX/VSX */
-#define HFSCR_FP (1 << (63-63)) /* Enable Floating Point */
+#define HFSCR_TAR __MASK(FSCR_TAR_LG)
+#define HFSCR_EBB __MASK(FSCR_EBB_LG)
+#define HFSCR_TM __MASK(FSCR_TM_LG)
+#define HFSCR_PM __MASK(FSCR_PM_LG)
+#define HFSCR_BHRB __MASK(FSCR_BHRB_LG)
+#define HFSCR_DSCR __MASK(FSCR_DSCR_LG)
+#define HFSCR_VECVSX __MASK(FSCR_VECVSX_LG)
+#define HFSCR_FP __MASK(FSCR_FP_LG)
#define SPRN_TAR 0x32f /* Target Address Register */
#define SPRN_LPCR 0x13E /* LPAR Control Register */
#define LPCR_VPM0 (1ul << (63-0))
next prev parent reply other threads:[~2013-08-13 6:33 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-13 6:33 [ 00/60] 3.10.7-stable review Greg Kroah-Hartman
2013-08-13 6:33 ` [ 01/60] SCSI: Dont attempt to send extended INQUIRY command if skip_vpd_pages is set Greg Kroah-Hartman
2013-08-13 6:33 ` [ 02/60] SCSI: megaraid_sas: megaraid_sas driver init fails in kdump kernel Greg Kroah-Hartman
2013-08-13 6:33 ` [ 03/60] virtio-scsi: Fix virtqueue affinity setup Greg Kroah-Hartman
2013-08-13 6:33 ` [ 04/60] powerpc: On POWERNV enable PPC_DENORMALISATION by default Greg Kroah-Hartman
2013-08-13 6:33 ` [ 05/60] powerpc: Fix hypervisor facility unavaliable vector number Greg Kroah-Hartman
2013-08-13 6:33 ` Greg Kroah-Hartman [this message]
2013-08-13 6:33 ` [ 07/60] powerpc: Fix context switch DSCR on POWER8 Greg Kroah-Hartman
2013-08-13 6:33 ` [ 08/60] powerpc: Save the TAR register earlier Greg Kroah-Hartman
2013-08-13 6:33 ` [ 09/60] powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs Greg Kroah-Hartman
2013-08-13 6:33 ` [ 10/60] ext4: destroy ext4_es_cachep on module unload Greg Kroah-Hartman
2013-08-13 6:33 ` [ 11/60] ext4: make sure group number is bumped after a inode allocation race Greg Kroah-Hartman
2013-08-13 6:33 ` [ 12/60] ext4: fix retry handling in ext4_ext_truncate() Greg Kroah-Hartman
2013-08-13 6:33 ` [ 13/60] regmap: cache: Make sure to sync the last register in a block Greg Kroah-Hartman
2013-08-13 6:33 ` [ 14/60] regmap: Add missing header for !CONFIG_REGMAP stubs Greg Kroah-Hartman
2013-08-13 6:33 ` [ 15/60] hwmon: (adt7470) Fix incorrect return code check Greg Kroah-Hartman
2013-08-13 6:33 ` [ 16/60] staging: zcache: fix "zcache=" kernel parameter Greg Kroah-Hartman
2013-08-13 6:33 ` [ 17/60] media: em28xx: fix assignment of the eeprom data Greg Kroah-Hartman
2013-08-13 6:33 ` [ 18/60] i2c: i2c-mxs: Use DMA mode even for small transfers Greg Kroah-Hartman
2013-08-13 6:33 ` [ 19/60] cpufreq: loongson2: fix regression related to clock management Greg Kroah-Hartman
2013-08-13 6:33 ` [ 20/60] cpufreq: rename ignore_nice as ignore_nice_load Greg Kroah-Hartman
2013-08-13 6:33 ` [ 21/60] ACPI / PM: Walk physical_node_list under physical_node_lock Greg Kroah-Hartman
2013-08-13 6:33 ` [ 22/60] tracing: Fix fields of struct trace_iterator that are zeroed by mistake Greg Kroah-Hartman
2013-08-13 6:33 ` [ 23/60] tracing: Make TRACE_ITER_STOP_ON_FREE stop the correct buffer Greg Kroah-Hartman
2013-08-13 6:33 ` [ 24/60] tracing: Use flag buffer_disabled for irqsoff tracer Greg Kroah-Hartman
2013-08-13 6:33 ` [ 25/60] tracing: Fix reset of time stamps during trace_clock changes Greg Kroah-Hartman
2013-08-13 6:33 ` [ 26/60] ALSA: usb-audio: do not trust too-big wMaxPacketSize values Greg Kroah-Hartman
2013-08-13 6:33 ` [ 27/60] ALSA: 6fire: fix DMA issues with URB transfer_buffer usage Greg Kroah-Hartman
2013-08-13 6:33 ` [ 28/60] Btrfs: release both paths before logging dir/changed extents Greg Kroah-Hartman
2013-08-13 6:33 ` [ 29/60] LOCKD: Dont call utsname()->nodename from nlmclnt_setlockargs Greg Kroah-Hartman
2013-08-13 6:33 ` [ 30/60] SUNRPC: Dont auto-disconnect from the local rpcbind socket Greg Kroah-Hartman
2013-08-13 6:33 ` [ 31/60] SUNRPC: If the rpcbind channel is disconnected, fail the call to unregister Greg Kroah-Hartman
2013-08-13 6:33 ` [ 32/60] virtio/console: Quit from splice_write if pipe->nrbufs is 0 Greg Kroah-Hartman
2013-08-13 6:34 ` [ 33/60] virtio/console: Add pipe_lock/unlock for splice_write Greg Kroah-Hartman
2013-08-13 6:34 ` [ 34/60] virtio: console: fix race with port unplug and open/close Greg Kroah-Hartman
2013-08-13 6:34 ` [ 35/60] virtio: console: fix race in port_fops_open() and port unplug Greg Kroah-Hartman
2013-08-13 6:34 ` [ 36/60] virtio: console: clean up port data immediately at time of unplug Greg Kroah-Hartman
2013-08-13 6:34 ` [ 37/60] virtio: console: fix raising SIGIO after port unplug Greg Kroah-Hartman
2013-08-13 6:34 ` [ 38/60] virtio: console: return -ENODEV on all read operations after unplug Greg Kroah-Hartman
2013-08-13 6:34 ` [ 39/60] drm/cirrus: Invalidate page tables when pinning a BO Greg Kroah-Hartman
2013-08-13 6:34 ` [ 40/60] drm/mgag200: " Greg Kroah-Hartman
2013-08-13 6:34 ` [ 41/60] drm/ast: invalidate " Greg Kroah-Hartman
2013-08-13 6:34 ` [ 42/60] drm: Dont pass negative delta to ktime_sub_ns() Greg Kroah-Hartman
2013-08-13 6:34 ` [ 43/60] drm/radeon: select audio dto based on encoder id for DCE3 Greg Kroah-Hartman
2013-08-13 6:34 ` [ 44/60] drm/radeon: stop sending invalid UVD destroy msg Greg Kroah-Hartman
2013-08-13 6:34 ` [ 45/60] ext4: allow the mount options nodelalloc and data=journal Greg Kroah-Hartman
2013-08-13 6:34 ` [ 46/60] ext4: fix mount/remount error messages for incompatible mount options Greg Kroah-Hartman
2013-08-13 6:34 ` [ 47/60] ext4: flush the extent status cache during EXT4_IOC_SWAP_BOOT Greg Kroah-Hartman
2013-08-13 6:34 ` [ 48/60] cifs: extend the buffer length enought for sprintf() using Greg Kroah-Hartman
2013-08-13 6:34 ` [ 49/60] cifs: dont instantiate new dentries in readdir for inodes that need to be revalidated immediately Greg Kroah-Hartman
2013-08-13 6:34 ` [ 50/60] zram: allow request end to coincide with disksize Greg Kroah-Hartman
2013-08-13 6:34 ` [ 51/60] usb: core: dont try to reset_device() a port that got just disconnected Greg Kroah-Hartman
2013-08-13 6:34 ` [ 52/60] debugfs: debugfs_remove_recursive() must not rely on list_empty(d_subdirs) Greg Kroah-Hartman
2013-08-13 6:34 ` [ 53/60] reiserfs: fix deadlock in umount Greg Kroah-Hartman
2013-08-13 6:34 ` [ 54/60] drm/i915: initialize gt_lock early with other spin locks Greg Kroah-Hartman
2013-08-13 6:34 ` [ 55/60] drm/radeon: fix halting UVD Greg Kroah-Hartman
2013-08-13 6:34 ` [ 56/60] drm/radeon: only save UVD bo when we have open handles Greg Kroah-Hartman
2013-08-13 6:34 ` [ 57/60] drm/radeon: always program the MC on startup Greg Kroah-Hartman
2013-08-13 6:34 ` [ 58/60] SCSI: nsp32: use mdelay instead of large udelay constants Greg Kroah-Hartman
2013-08-13 6:34 ` [ 59/60] mtd: omap2: allow bulding as a module Greg Kroah-Hartman
2013-08-13 6:34 ` [ 60/60] MIPS: Expose missing pci_io{map,unmap} declarations Greg Kroah-Hartman
2013-08-13 11:57 ` [ 00/60] 3.10.7-stable review Guenter Roeck
2013-08-13 17:57 ` Greg Kroah-Hartman
2013-08-13 17:18 ` Shuah Khan
2013-08-13 17:57 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130813063332.659677725@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikey@neuling.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).