[ 00/13] 3.4.60-stable review

[ 00/13] 3.4.60-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.4.60 release.
There are 13 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Aug 29 01:03:03 UTC 2013.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.60-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.4.60-rc1

David Vrabel <david.vrabel@citrix.com>
    x86/xen: do not identity map UNUSABLE regions in the machine E820

Martin Peschke <mpeschke@linux.vnet.ibm.com>
    SCSI: zfcp: fix schedule-inside-lock in scsi_device list loops

Martin Peschke <mpeschke@linux.vnet.ibm.com>
    SCSI: zfcp: fix lock imbalance by reworking request queue locking

Terry Suereth <terry.suereth@gmail.com>
    libata: apply behavioral quirks to sil3826 PMP

Dan Carpenter <dan.carpenter@oracle.com>
    Hostap: copying wrong data prism2_ioctl_giwaplist()

Vyacheslav Dubeyko <slava@dubeyko.com>
    nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection

Vyacheslav Dubeyko <slava@dubeyko.com>
    nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error

Wladislav Wiebe <wladislav.kw@gmail.com>
    of: fdt: fix memory initialization for expanded DT

Chris Wilson <chris@chris-wilson.co.uk>
    drm/i915: Invalidate TLBs for the rings after a reset

David Vrabel <david.vrabel@citrix.com>
    xen/events: initialize local per-cpu mask for all possible events

Jussi Kivilinna <jussi.kivilinna@iki.fi>
    zd1201: do not use stack as URB transfer_buffer

Tejun Heo <tj@kernel.org>
    workqueue: consider work function when searching for busy work items

Lai Jiangshan <laijs@cn.fujitsu.com>
    workqueue: fix possible stall on try_to_grab_pending() of a delayed work item


-------------

Diffstat:

 Makefile                                   |  4 +-
 arch/x86/xen/setup.c                       | 22 ++++++++++
 drivers/ata/libata-pmp.c                   | 12 +++---
 drivers/gpu/drm/i915/i915_reg.h            |  2 +
 drivers/gpu/drm/i915/intel_ringbuffer.c    | 12 ++++++
 drivers/net/wireless/hostap/hostap_ioctl.c |  4 +-
 drivers/net/wireless/zd1201.c              |  4 +-
 drivers/of/fdt.c                           |  2 +
 drivers/s390/scsi/zfcp_erp.c               | 29 +++++++++----
 drivers/s390/scsi/zfcp_qdio.c              |  8 +---
 drivers/xen/events.c                       |  2 +-
 fs/nilfs2/segbuf.c                         |  5 +--
 include/linux/wait.h                       | 57 +++++++++++++++++++++++++
 kernel/workqueue.c                         | 67 +++++++++++++++++++++++-------
 14 files changed, 188 insertions(+), 42 deletions(-)

[ 01/13] workqueue: fix possible stall on try_to_grab_pending() of a delayed work item

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lai Jiangshan <laijs@cn.fujitsu.com>

commit 3aa62497594430ea522050b75c033f71f2c60ee6 upstream.

Currently, when try_to_grab_pending() grabs a delayed work item, it
leaves its linked work items alone on the delayed_works.  The linked
work items are always NO_COLOR and will cause future
cwq_activate_first_delayed() increase cwq->nr_active incorrectly, and
may cause the whole cwq to stall.  For example,

state: cwq->max_active = 1, cwq->nr_active = 1
       one work in cwq->pool, many in cwq->delayed_works.

step1: try_to_grab_pending() removes a work item from delayed_works
       but leaves its NO_COLOR linked work items on it.

step2: Later on, cwq_activate_first_delayed() activates the linked
       work item increasing ->nr_active.

step3: cwq->nr_active = 1, but all activated work items of the cwq are
       NO_COLOR.  When they finish, cwq->nr_active will not be
       decreased due to NO_COLOR, and no further work items will be
       activated from cwq->delayed_works. the cwq stalls.

Fix it by ensuring the target work item is activated before stealing
PENDING in try_to_grab_pending().  This ensures that all the linked
work items are activated without incorrectly bumping cwq->nr_active.

tj: Updated comment and description.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[lizf: backported to 3.4: adjust context]
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/workqueue.c |   25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1721,10 +1721,9 @@ static void move_linked_works(struct wor
 		*nextp = n;
 }
 
-static void cwq_activate_first_delayed(struct cpu_workqueue_struct *cwq)
+static void cwq_activate_delayed_work(struct work_struct *work)
 {
-	struct work_struct *work = list_first_entry(&cwq->delayed_works,
-						    struct work_struct, entry);
+	struct cpu_workqueue_struct *cwq = get_work_cwq(work);
 	struct list_head *pos = gcwq_determine_ins_pos(cwq->gcwq, cwq);
 
 	trace_workqueue_activate_work(work);
@@ -1733,6 +1732,14 @@ static void cwq_activate_first_delayed(s
 	cwq->nr_active++;
 }
 
+static void cwq_activate_first_delayed(struct cpu_workqueue_struct *cwq)
+{
+	struct work_struct *work = list_first_entry(&cwq->delayed_works,
+						    struct work_struct, entry);
+
+	cwq_activate_delayed_work(work);
+}
+
 /**
  * cwq_dec_nr_in_flight - decrement cwq's nr_in_flight
  * @cwq: cwq of interest
@@ -2625,6 +2632,18 @@ static int try_to_grab_pending(struct wo
 		smp_rmb();
 		if (gcwq == get_work_gcwq(work)) {
 			debug_work_deactivate(work);
+
+			/*
+			 * A delayed work item cannot be grabbed directly
+			 * because it might have linked NO_COLOR work items
+			 * which, if left on the delayed_list, will confuse
+			 * cwq->nr_active management later on and cause
+			 * stall.  Make sure the work item is activated
+			 * before grabbing.
+			 */
+			if (*work_data_bits(work) & WORK_STRUCT_DELAYED)
+				cwq_activate_delayed_work(work);
+
 			list_del_init(&work->entry);
 			cwq_dec_nr_in_flight(get_work_cwq(work),
 				get_work_color(work),

[ 02/13] workqueue: consider work function when searching for busy work items

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit a2c1c57be8d9fd5b716113c8991d3d702eeacf77 upstream.

To avoid executing the same work item concurrenlty, workqueue hashes
currently busy workers according to their current work items and looks
up the the table when it wants to execute a new work item.  If there
already is a worker which is executing the new work item, the new item
is queued to the found worker so that it gets executed only after the
current execution finishes.

Unfortunately, a work item may be freed while being executed and thus
recycled for different purposes.  If it gets recycled for a different
work item and queued while the previous execution is still in
progress, workqueue may make the new work item wait for the old one
although the two aren't really related in any way.

In extreme cases, this false dependency may lead to deadlock although
it's extremely unlikely given that there aren't too many self-freeing
work item users and they usually don't wait for other work items.

To alleviate the problem, record the current work function in each
busy worker and match it together with the work item address in
find_worker_executing_work().  While this isn't complete, it ensures
that unrelated work items don't interact with each other and in the
very unlikely case where a twisted wq user triggers it, it's always
onto itself making the culprit easy to spot.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andrey Isakov <andy51@gmx.ru>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51701
[lizf: Backported to 3.4:
 - Adjust context
 - Incorporate earlier logging cleanup in process_one_work() from
   044c782ce3a9 ('workqueue: fix checkpatch issues')]
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/workqueue.c |   42 +++++++++++++++++++++++++++++++-----------
 1 file changed, 31 insertions(+), 11 deletions(-)

--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -128,6 +128,7 @@ struct worker {
 	};
 
 	struct work_struct	*current_work;	/* L: work being processed */
+	work_func_t		current_func;	/* L: current_work's fn */
 	struct cpu_workqueue_struct *current_cwq; /* L: current_work's cwq */
 	struct list_head	scheduled;	/* L: scheduled works */
 	struct task_struct	*task;		/* I: worker task */
@@ -838,7 +839,8 @@ static struct worker *__find_worker_exec
 	struct hlist_node *tmp;
 
 	hlist_for_each_entry(worker, tmp, bwh, hentry)
-		if (worker->current_work == work)
+		if (worker->current_work == work &&
+		    worker->current_func == work->func)
 			return worker;
 	return NULL;
 }
@@ -848,9 +850,27 @@ static struct worker *__find_worker_exec
  * @gcwq: gcwq of interest
  * @work: work to find worker for
  *
- * Find a worker which is executing @work on @gcwq.  This function is
- * identical to __find_worker_executing_work() except that this
- * function calculates @bwh itself.
+ * Find a worker which is executing @work on @gcwq by searching
+ * @gcwq->busy_hash which is keyed by the address of @work.  For a worker
+ * to match, its current execution should match the address of @work and
+ * its work function.  This is to avoid unwanted dependency between
+ * unrelated work executions through a work item being recycled while still
+ * being executed.
+ *
+ * This is a bit tricky.  A work item may be freed once its execution
+ * starts and nothing prevents the freed area from being recycled for
+ * another work item.  If the same work item address ends up being reused
+ * before the original execution finishes, workqueue will identify the
+ * recycled work item as currently executing and make it wait until the
+ * current execution finishes, introducing an unwanted dependency.
+ *
+ * This function checks the work item address, work function and workqueue
+ * to avoid false positives.  Note that this isn't complete as one may
+ * construct a work function which can introduce dependency onto itself
+ * through a recycled work item.  Well, if somebody wants to shoot oneself
+ * in the foot that badly, there's only so much we can do, and if such
+ * deadlock actually occurs, it should be easy to locate the culprit work
+ * function.
  *
  * CONTEXT:
  * spin_lock_irq(gcwq->lock).
@@ -1811,7 +1831,6 @@ __acquires(&gcwq->lock)
 	struct global_cwq *gcwq = cwq->gcwq;
 	struct hlist_head *bwh = busy_worker_head(gcwq, work);
 	bool cpu_intensive = cwq->wq->flags & WQ_CPU_INTENSIVE;
-	work_func_t f = work->func;
 	int work_color;
 	struct worker *collision;
 #ifdef CONFIG_LOCKDEP
@@ -1840,6 +1859,7 @@ __acquires(&gcwq->lock)
 	debug_work_deactivate(work);
 	hlist_add_head(&worker->hentry, bwh);
 	worker->current_work = work;
+	worker->current_func = work->func;
 	worker->current_cwq = cwq;
 	work_color = get_work_color(work);
 
@@ -1877,7 +1897,7 @@ __acquires(&gcwq->lock)
 	lock_map_acquire_read(&cwq->wq->lockdep_map);
 	lock_map_acquire(&lockdep_map);
 	trace_workqueue_execute_start(work);
-	f(work);
+	worker->current_func(work);
 	/*
 	 * While we must be careful to not use "work" after this, the trace
 	 * point will only record its address.
@@ -1887,11 +1907,10 @@ __acquires(&gcwq->lock)
 	lock_map_release(&cwq->wq->lockdep_map);
 
 	if (unlikely(in_atomic() || lockdep_depth(current) > 0)) {
-		printk(KERN_ERR "BUG: workqueue leaked lock or atomic: "
-		       "%s/0x%08x/%d\n",
-		       current->comm, preempt_count(), task_pid_nr(current));
-		printk(KERN_ERR "    last function: ");
-		print_symbol("%s\n", (unsigned long)f);
+		pr_err("BUG: workqueue leaked lock or atomic: %s/0x%08x/%d\n"
+		       "     last function: %pf\n",
+		       current->comm, preempt_count(), task_pid_nr(current),
+		       worker->current_func);
 		debug_show_held_locks(current);
 		dump_stack();
 	}
@@ -1905,6 +1924,7 @@ __acquires(&gcwq->lock)
 	/* we're done with it, release */
 	hlist_del_init(&worker->hentry);
 	worker->current_work = NULL;
+	worker->current_func = NULL;
 	worker->current_cwq = NULL;
 	cwq_dec_nr_in_flight(cwq, work_color, false);
 }

[ 03/13] zd1201: do not use stack as URB transfer_buffer

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jussi Kivilinna <jussi.kivilinna@iki.fi>

commit 1206ff4ff9d2ef7468a355328bc58ac6ebf5be44 upstream.

Patch fixes zd1201 not to use stack as URB transfer_buffer. URB buffers need
to be DMA-able, which stack is not.

Patch is only compile tested.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/zd1201.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -98,10 +98,12 @@ static int zd1201_fw_upload(struct usb_d
 		goto exit;
 
 	err = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 0x4,
-	    USB_DIR_IN | 0x40, 0,0, &ret, sizeof(ret), ZD1201_FW_TIMEOUT);
+	    USB_DIR_IN | 0x40, 0, 0, buf, sizeof(ret), ZD1201_FW_TIMEOUT);
 	if (err < 0)
 		goto exit;
 
+	memcpy(&ret, buf, sizeof(ret));
+
 	if (ret & 0x80) {
 		err = -EIO;
 		goto exit;

[ 04/13] xen/events: initialize local per-cpu mask for all possible events

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Vrabel <david.vrabel@citrix.com>

commit 84ca7a8e45dafb49cd5ca90a343ba033e2885c17 upstream.

The sizeof() argument in init_evtchn_cpu_bindings() is incorrect
resulting in only the first 64 (or 32 in 32-bit guests) ports having
their bindings being initialized to VCPU 0.

In most cases this does not cause a problem as request_irq() will set
the irq affinity which will set the correct local per-cpu mask.
However, if the request_irq() is called on a VCPU other than 0, there
is a window between the unmasking of the event and the affinity being
set were an event may be lost because it is not locally unmasked on
any VCPU. If request_irq() is called on VCPU 0 then local irqs are
disabled during the window and the race does not occur.

Fix this by initializing all NR_EVENT_CHANNEL bits in the local
per-cpu masks.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/events.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -324,7 +324,7 @@ static void init_evtchn_cpu_bindings(voi
 
 	for_each_possible_cpu(i)
 		memset(per_cpu(cpu_evtchn_mask, i),
-		       (i == 0) ? ~0 : 0, sizeof(*per_cpu(cpu_evtchn_mask, i)));
+		       (i == 0) ? ~0 : 0, NR_EVENT_CHANNELS/8);
 }
 
 static inline void clear_evtchn(int port)

[ 05/13] drm/i915: Invalidate TLBs for the rings after a reset

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit 884020bf3d2a3787a1cc6df902e98e0eec60330b upstream.

After any "soft gfx reset" we must manually invalidate the TLBs
associated with each ring. Empirically, it seems that a
suspend/resume or D3-D0 cycle count as a "soft reset". The symptom is
that the hardware would fail to note the new address for its status
page, and so it would continue to write the shadow registers and
breadcrumbs into the old physical address (now used by something
completely different, scary). Whereas the driver would read the new
status page and never see any progress, it would appear that the GPU
hung immediately upon resume.

Based on a patch by naresh kumar kachhi <naresh.kumar.kacchi@intel.com>

Reported-by: Thiago Macieira <thiago@kde.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64725
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Thiago Macieira <thiago@kde.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_reg.h         |    2 ++
 drivers/gpu/drm/i915/intel_ringbuffer.c |   12 ++++++++++++
 2 files changed, 14 insertions(+)

--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -502,6 +502,8 @@
 					will not assert AGPBUSY# and will only
 					be delivered when out of C3. */
 #define   INSTPM_FORCE_ORDERING				(1<<7) /* GEN6+ */
+#define   INSTPM_TLB_INVALIDATE	(1<<9)
+#define   INSTPM_SYNC_FLUSH	(1<<5)
 #define ACTHD	        0x020c8
 #define FW_BLC		0x020d8
 #define FW_BLC2		0x020dc
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -767,6 +767,18 @@ void intel_ring_setup_status_page(struct
 
 	I915_WRITE(mmio, (u32)ring->status_page.gfx_addr);
 	POSTING_READ(mmio);
+
+	/* Flush the TLB for this page */
+	if (INTEL_INFO(dev)->gen >= 6) {
+		u32 reg = RING_INSTPM(ring->mmio_base);
+		I915_WRITE(reg,
+			   _MASKED_BIT_ENABLE(INSTPM_TLB_INVALIDATE |
+					      INSTPM_SYNC_FLUSH));
+		if (wait_for((I915_READ(reg) & INSTPM_SYNC_FLUSH) == 0,
+			     1000))
+			DRM_ERROR("%s: wait for SyncFlush to complete for TLB invalidation timed out\n",
+				  ring->name);
+	}
 }
 
 static int

[ 06/13] of: fdt: fix memory initialization for expanded DT

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wladislav Wiebe <wladislav.kw@gmail.com>

commit 9e40127526e857fa3f29d51e83277204fbdfc6ba upstream.

Already existing property flags are filled wrong for properties created from
initial FDT. This could cause problems if this DYNAMIC device-tree functions
are used later, i.e. properties are attached/detached/replaced. Simply dumping
flags from the running system show, that some initial static (not allocated via
kzmalloc()) nodes are marked as dynamic.

I putted some debug extensions to property_proc_show(..) :
..
+       if (OF_IS_DYNAMIC(pp))
+               pr_err("DEBUG: xxx : OF_IS_DYNAMIC\n");
+       if (OF_IS_DETACHED(pp))
+               pr_err("DEBUG: xxx : OF_IS_DETACHED\n");

when you operate on the nodes (e.g.: ~$ cat /proc/device-tree/*some_node*) you
will see that those flags are filled wrong, basically in most cases it will dump
a DYNAMIC or DETACHED status, which is in not true.
(BTW. this OF_IS_DETACHED is a own define for debug purposes which which just
make a test_bit(OF_DETACHED, &x->_flags)

If nodes are dynamic kernel is allowed to kfree() them. But it will crash
attempting to do so on the nodes from FDT -- they are not allocated via
kzmalloc().

Signed-off-by: Wladislav Wiebe <wladislav.kw@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@nsn.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/of/fdt.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -390,6 +390,8 @@ static void __unflatten_device_tree(stru
 	mem = (unsigned long)
 		dt_alloc(size + 4, __alignof__(struct device_node));
 
+	memset((void *)mem, 0, size);
+
 	((__be32 *)mem)[size / 4] = cpu_to_be32(0xdeadbeef);
 
 	pr_debug("  unflattening %lx...\n", mem);

[ 07/13] nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vyacheslav Dubeyko <slava@dubeyko.com>

commit 2df37a19c686c2d7c4e9b4ce1505b5141e3e5552 upstream.

Remove double call of bio_put() in nilfs_end_bio_write() for the case of
BIO_EOPNOTSUPP error detection.  The issue was found by Dan Carpenter
and he suggests first version of the fix too.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nilfs2/segbuf.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/fs/nilfs2/segbuf.c
+++ b/fs/nilfs2/segbuf.c
@@ -345,8 +345,7 @@ static void nilfs_end_bio_write(struct b
 
 	if (err == -EOPNOTSUPP) {
 		set_bit(BIO_EOPNOTSUPP, &bio->bi_flags);
-		bio_put(bio);
-		/* to be detected by submit_seg_bio() */
+		/* to be detected by nilfs_segbuf_submit_bio() */
 	}
 
 	if (!uptodate)

[ 08/13] nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vyacheslav Dubeyko <slava@dubeyko.com>

commit 4bf93b50fd04118ac7f33a3c2b8a0a1f9fa80bc9 upstream.

Fix the issue with improper counting number of flying bio requests for
BIO_EOPNOTSUPP error detection case.

The sb_nbio must be incremented exactly the same number of times as
complete() function was called (or will be called) because
nilfs_segbuf_wait() will call wail_for_completion() for the number of
times set to sb_nbio:

  do {
      wait_for_completion(&segbuf->sb_bio_event);
  } while (--segbuf->sb_nbio > 0);

Two functions complete() and wait_for_completion() must be called the
same number of times for the same sb_bio_event.  Otherwise,
wait_for_completion() will hang or leak.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nilfs2/segbuf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nilfs2/segbuf.c
+++ b/fs/nilfs2/segbuf.c
@@ -376,12 +376,12 @@ static int nilfs_segbuf_submit_bio(struc
 	bio->bi_private = segbuf;
 	bio_get(bio);
 	submit_bio(mode, bio);
+	segbuf->sb_nbio++;
 	if (bio_flagged(bio, BIO_EOPNOTSUPP)) {
 		bio_put(bio);
 		err = -EOPNOTSUPP;
 		goto failed;
 	}
-	segbuf->sb_nbio++;
 	bio_put(bio);
 
 	wi->bio = NULL;

[ 09/13] Hostap: copying wrong data prism2_ioctl_giwaplist()

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 909bd5926d474e275599094acad986af79671ac9 upstream.

We want the data stored in "addr" and "qual", but the extra ampersands
mean we are copying stack data instead.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/hostap/hostap_ioctl.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -522,9 +522,9 @@ static int prism2_ioctl_giwaplist(struct
 
 	data->length = prism2_ap_get_sta_qual(local, addr, qual, IW_MAX_AP, 1);
 
-	memcpy(extra, &addr, sizeof(struct sockaddr) * data->length);
+	memcpy(extra, addr, sizeof(struct sockaddr) * data->length);
 	data->flags = 1; /* has quality information */
-	memcpy(extra + sizeof(struct sockaddr) * data->length, &qual,
+	memcpy(extra + sizeof(struct sockaddr) * data->length, qual,
 	       sizeof(struct iw_quality) * data->length);
 
 	kfree(addr);

[ 10/13] libata: apply behavioral quirks to sil3826 PMP

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Terry Suereth <terry.suereth@gmail.com>

commit 8ffff94d20b7eb446e848e0046107d51b17a20a8 upstream.

Fixing support for the Silicon Image 3826 port multiplier, by applying
to it the same quirks applied to the Silicon Image 3726.  Specifically
fixes the repeated timeout/reset process which previously afflicted
the 3726, as described from line 290.  Slightly based on notes from:

https://bugzilla.redhat.com/show_bug.cgi?id=890237

Signed-off-by: Terry Suereth <terry.suereth@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-pmp.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -289,24 +289,24 @@ static int sata_pmp_configure(struct ata
 
 	/* Disable sending Early R_OK.
 	 * With "cached read" HDD testing and multiple ports busy on a SATA
-	 * host controller, 3726 PMP will very rarely drop a deferred
+	 * host controller, 3x26 PMP will very rarely drop a deferred
 	 * R_OK that was intended for the host. Symptom will be all
 	 * 5 drives under test will timeout, get reset, and recover.
 	 */
-	if (vendor == 0x1095 && devid == 0x3726) {
+	if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
 		u32 reg;
 
 		err_mask = sata_pmp_read(&ap->link, PMP_GSCR_SII_POL, &reg);
 		if (err_mask) {
 			rc = -EIO;
-			reason = "failed to read Sil3726 Private Register";
+			reason = "failed to read Sil3x26 Private Register";
 			goto fail;
 		}
 		reg &= ~0x1;
 		err_mask = sata_pmp_write(&ap->link, PMP_GSCR_SII_POL, reg);
 		if (err_mask) {
 			rc = -EIO;
-			reason = "failed to write Sil3726 Private Register";
+			reason = "failed to write Sil3x26 Private Register";
 			goto fail;
 		}
 	}
@@ -383,8 +383,8 @@ static void sata_pmp_quirks(struct ata_p
 	u16 devid = sata_pmp_gscr_devid(gscr);
 	struct ata_link *link;
 
-	if (vendor == 0x1095 && devid == 0x3726) {
-		/* sil3726 quirks */
+	if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
+		/* sil3x26 quirks */
 		ata_for_each_link(link, ap, EDGE) {
 			/* link reports offline after LPM */
 			link->flags |= ATA_LFLAG_NO_LPM;

[ 11/13] SCSI: zfcp: fix lock imbalance by reworking request queue locking

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Peschke <mpeschke@linux.vnet.ibm.com>

commit d79ff142624e1be080ad8d09101f7004d79c36e1 upstream.

This patch adds wait_event_interruptible_lock_irq_timeout(), which is a
straight-forward descendant of wait_event_interruptible_timeout() and
wait_event_interruptible_lock_irq().

The zfcp driver used to call wait_event_interruptible_timeout()
in combination with some intricate and error-prone locking. Using
wait_event_interruptible_lock_irq_timeout() as a replacement
nicely cleans up that locking.

This rework removes a situation that resulted in a locking imbalance
in zfcp_qdio_sbal_get():

BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10
    last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp]

It was introduced by commit c2af7545aaff3495d9bf9a7608c52f0af86fb194
"[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new
code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit
without a required lock being held. The problem occured when a
special, non-SCSI I/O request was being submitted in process context,
when the adapter's queues had been torn down. In this case the bug
surfaced when the Fibre Channel port connection for a well-known address
was closed during a concurrent adapter shut-down procedure, which is a
rare constellation.

This patch also fixes these warnings from the sparse tool (make C=1):

drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in
 'zfcp_qdio_sbal_check' - wrong count at exit
drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in
 'zfcp_qdio_sbal_get' - unexpected unlock

Last but not least, we get rid of that crappy lock-unlock-lock
sequence at the beginning of the critical section.

It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/scsi/zfcp_qdio.c |    8 +----
 include/linux/wait.h          |   57 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+), 6 deletions(-)

--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -224,11 +224,9 @@ int zfcp_qdio_sbals_from_sg(struct zfcp_
 
 static int zfcp_qdio_sbal_check(struct zfcp_qdio *qdio)
 {
-	spin_lock_irq(&qdio->req_q_lock);
 	if (atomic_read(&qdio->req_q_free) ||
 	    !(atomic_read(&qdio->adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP))
 		return 1;
-	spin_unlock_irq(&qdio->req_q_lock);
 	return 0;
 }
 
@@ -246,9 +244,8 @@ int zfcp_qdio_sbal_get(struct zfcp_qdio
 {
 	long ret;
 
-	spin_unlock_irq(&qdio->req_q_lock);
-	ret = wait_event_interruptible_timeout(qdio->req_q_wq,
-			       zfcp_qdio_sbal_check(qdio), 5 * HZ);
+	ret = wait_event_interruptible_lock_irq_timeout(qdio->req_q_wq,
+		       zfcp_qdio_sbal_check(qdio), qdio->req_q_lock, 5 * HZ);
 
 	if (!(atomic_read(&qdio->adapter->status) & ZFCP_STATUS_ADAPTER_QDIOUP))
 		return -EIO;
@@ -262,7 +259,6 @@ int zfcp_qdio_sbal_get(struct zfcp_qdio
 		zfcp_erp_adapter_reopen(qdio->adapter, 0, "qdsbg_1");
 	}
 
-	spin_lock_irq(&qdio->req_q_lock);
 	return -EIO;
 }
 
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -530,6 +530,63 @@ do {									\
 	 ? 0 : __wait_event_interruptible_locked(wq, condition, 1, 1))
 
 
+#define __wait_event_interruptible_lock_irq_timeout(wq, condition,	\
+						    lock, ret)		\
+do {									\
+	DEFINE_WAIT(__wait);						\
+									\
+	for (;;) {							\
+		prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE);	\
+		if (condition)						\
+			break;						\
+		if (signal_pending(current)) {				\
+			ret = -ERESTARTSYS;				\
+			break;						\
+		}							\
+		spin_unlock_irq(&lock);					\
+		ret = schedule_timeout(ret);				\
+		spin_lock_irq(&lock);					\
+		if (!ret)						\
+			break;						\
+	}								\
+	finish_wait(&wq, &__wait);					\
+} while (0)
+
+/**
+ * wait_event_interruptible_lock_irq_timeout - sleep until a condition gets true or a timeout elapses.
+ *		The condition is checked under the lock. This is expected
+ *		to be called with the lock taken.
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ * @lock: a locked spinlock_t, which will be released before schedule()
+ *	  and reacquired afterwards.
+ * @timeout: timeout, in jiffies
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or signal is received. The @condition is
+ * checked each time the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * This is supposed to be called while holding the lock. The lock is
+ * dropped before going to sleep and is reacquired afterwards.
+ *
+ * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it
+ * was interrupted by a signal, and the remaining jiffies otherwise
+ * if the condition evaluated to true before the timeout elapsed.
+ */
+#define wait_event_interruptible_lock_irq_timeout(wq, condition, lock,	\
+						  timeout)		\
+({									\
+	int __ret = timeout;						\
+									\
+	if (!(condition))						\
+		__wait_event_interruptible_lock_irq_timeout(		\
+					wq, condition, lock, __ret);	\
+	__ret;								\
+})
+
 
 #define __wait_event_killable(wq, condition, ret)			\
 do {									\

[ 12/13] SCSI: zfcp: fix schedule-inside-lock in scsi_device list loops

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Peschke <mpeschke@linux.vnet.ibm.com>

commit 924dd584b198a58aa7cb3efefd8a03326550ce8f upstream.

BUG: sleeping function called from invalid context at kernel/workqueue.c:2752
in_atomic(): 1, irqs_disabled(): 1, pid: 360, name: zfcperp0.0.1700
CPU: 1 Not tainted 3.9.3+ #69
Process zfcperp0.0.1700 (pid: 360, task: 0000000075b7e080, ksp: 000000007476bc30)
<snip>
Call Trace:
([<00000000001165de>] show_trace+0x106/0x154)
 [<00000000001166a0>] show_stack+0x74/0xf4
 [<00000000006ff646>] dump_stack+0xc6/0xd4
 [<000000000017f3a0>] __might_sleep+0x128/0x148
 [<000000000015ece8>] flush_work+0x54/0x1f8
 [<00000000001630de>] __cancel_work_timer+0xc6/0x128
 [<00000000005067ac>] scsi_device_dev_release_usercontext+0x164/0x23c
 [<0000000000161816>] execute_in_process_context+0x96/0xa8
 [<00000000004d33d8>] device_release+0x60/0xc0
 [<000000000048af48>] kobject_release+0xa8/0x1c4
 [<00000000004f4bf2>] __scsi_iterate_devices+0xfa/0x130
 [<000003ff801b307a>] zfcp_erp_strategy+0x4da/0x1014 [zfcp]
 [<000003ff801b3caa>] zfcp_erp_thread+0xf6/0x2b0 [zfcp]
 [<000000000016b75a>] kthread+0xf2/0xfc
 [<000000000070c9de>] kernel_thread_starter+0x6/0xc
 [<000000000070c9d8>] kernel_thread_starter+0x0/0xc

Apparently, the ref_count for some scsi_device drops down to zero,
triggering device removal through execute_in_process_context(), while
the lldd error recovery thread iterates through a scsi device list.
Unfortunately, execute_in_process_context() decides to immediately
execute that device removal function, instead of scheduling asynchronous
execution, since it detects process context and thinks it is safe to do
so. But almost all calls to shost_for_each_device() in our lldd are
inside spin_lock_irq, even in thread context. Obviously, schedule()
inside spin_lock_irq sections is a bad idea.

Change the lldd to use the proper iterator function,
__shost_for_each_device(), in combination with required locking.

Occurences that need to be changed include all calls in zfcp_erp.c,
since those might be executed in zfcp error recovery thread context
with a lock held.

Other occurences of shost_for_each_device() in zfcp_fsf.c do not
need to be changed (no process context, no surrounding locking).

The problem was introduced in Linux 2.6.37 by commit
b62a8d9b45b971a67a0f8413338c230e3117dff5
"[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit".

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/scsi/zfcp_erp.c |   29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -102,10 +102,13 @@ static void zfcp_erp_action_dismiss_port
 
 	if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_ERP_INUSE)
 		zfcp_erp_action_dismiss(&port->erp_action);
-	else
-		shost_for_each_device(sdev, port->adapter->scsi_host)
+	else {
+		spin_lock(port->adapter->scsi_host->host_lock);
+		__shost_for_each_device(sdev, port->adapter->scsi_host)
 			if (sdev_to_zfcp(sdev)->port == port)
 				zfcp_erp_action_dismiss_lun(sdev);
+		spin_unlock(port->adapter->scsi_host->host_lock);
+	}
 }
 
 static void zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *adapter)
@@ -592,9 +595,11 @@ static void _zfcp_erp_lun_reopen_all(str
 {
 	struct scsi_device *sdev;
 
-	shost_for_each_device(sdev, port->adapter->scsi_host)
+	spin_lock(port->adapter->scsi_host->host_lock);
+	__shost_for_each_device(sdev, port->adapter->scsi_host)
 		if (sdev_to_zfcp(sdev)->port == port)
 			_zfcp_erp_lun_reopen(sdev, clear, id, 0);
+	spin_unlock(port->adapter->scsi_host->host_lock);
 }
 
 static void zfcp_erp_strategy_followup_failed(struct zfcp_erp_action *act)
@@ -1435,8 +1440,10 @@ void zfcp_erp_set_adapter_status(struct
 		atomic_set_mask(common_mask, &port->status);
 	read_unlock_irqrestore(&adapter->port_list_lock, flags);
 
-	shost_for_each_device(sdev, adapter->scsi_host)
+	spin_lock_irqsave(adapter->scsi_host->host_lock, flags);
+	__shost_for_each_device(sdev, adapter->scsi_host)
 		atomic_set_mask(common_mask, &sdev_to_zfcp(sdev)->status);
+	spin_unlock_irqrestore(adapter->scsi_host->host_lock, flags);
 }
 
 /**
@@ -1470,11 +1477,13 @@ void zfcp_erp_clear_adapter_status(struc
 	}
 	read_unlock_irqrestore(&adapter->port_list_lock, flags);
 
-	shost_for_each_device(sdev, adapter->scsi_host) {
+	spin_lock_irqsave(adapter->scsi_host->host_lock, flags);
+	__shost_for_each_device(sdev, adapter->scsi_host) {
 		atomic_clear_mask(common_mask, &sdev_to_zfcp(sdev)->status);
 		if (clear_counter)
 			atomic_set(&sdev_to_zfcp(sdev)->erp_counter, 0);
 	}
+	spin_unlock_irqrestore(adapter->scsi_host->host_lock, flags);
 }
 
 /**
@@ -1488,16 +1497,19 @@ void zfcp_erp_set_port_status(struct zfc
 {
 	struct scsi_device *sdev;
 	u32 common_mask = mask & ZFCP_COMMON_FLAGS;
+	unsigned long flags;
 
 	atomic_set_mask(mask, &port->status);
 
 	if (!common_mask)
 		return;
 
-	shost_for_each_device(sdev, port->adapter->scsi_host)
+	spin_lock_irqsave(port->adapter->scsi_host->host_lock, flags);
+	__shost_for_each_device(sdev, port->adapter->scsi_host)
 		if (sdev_to_zfcp(sdev)->port == port)
 			atomic_set_mask(common_mask,
 					&sdev_to_zfcp(sdev)->status);
+	spin_unlock_irqrestore(port->adapter->scsi_host->host_lock, flags);
 }
 
 /**
@@ -1512,6 +1524,7 @@ void zfcp_erp_clear_port_status(struct z
 	struct scsi_device *sdev;
 	u32 common_mask = mask & ZFCP_COMMON_FLAGS;
 	u32 clear_counter = mask & ZFCP_STATUS_COMMON_ERP_FAILED;
+	unsigned long flags;
 
 	atomic_clear_mask(mask, &port->status);
 
@@ -1521,13 +1534,15 @@ void zfcp_erp_clear_port_status(struct z
 	if (clear_counter)
 		atomic_set(&port->erp_counter, 0);
 
-	shost_for_each_device(sdev, port->adapter->scsi_host)
+	spin_lock_irqsave(port->adapter->scsi_host->host_lock, flags);
+	__shost_for_each_device(sdev, port->adapter->scsi_host)
 		if (sdev_to_zfcp(sdev)->port == port) {
 			atomic_clear_mask(common_mask,
 					  &sdev_to_zfcp(sdev)->status);
 			if (clear_counter)
 				atomic_set(&sdev_to_zfcp(sdev)->erp_counter, 0);
 		}
+	spin_unlock_irqrestore(port->adapter->scsi_host->host_lock, flags);
 }
 
 /**

[ 13/13] x86/xen: do not identity map UNUSABLE regions in the machine E820

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Vrabel <david.vrabel@citrix.com>

commit 3bc38cbceb85881a8eb789ee1aa56678038b1909 upstream.

If there are UNUSABLE regions in the machine memory map, dom0 will
attempt to map them 1:1 which is not permitted by Xen and the kernel
will crash.

There isn't anything interesting in the UNUSABLE region that the dom0
kernel needs access to so we can avoid making the 1:1 mapping and
treat it as RAM.

We only do this for dom0, as that is where tboot case shows up.
A PV domU could have an UNUSABLE region in its pseudo-physical map
and would need to be handled in another patch.

This fixes a boot failure on hosts with tboot.

tboot marks a region in the e820 map as unusable and the dom0 kernel
would attempt to map this region and Xen does not permit unusable
regions to be mapped by guests.

  (XEN)  0000000000000000 - 0000000000060000 (usable)
  (XEN)  0000000000060000 - 0000000000068000 (reserved)
  (XEN)  0000000000068000 - 000000000009e000 (usable)
  (XEN)  0000000000100000 - 0000000000800000 (usable)
  (XEN)  0000000000800000 - 0000000000972000 (unusable)

tboot marked this region as unusable.

  (XEN)  0000000000972000 - 00000000cf200000 (usable)
  (XEN)  00000000cf200000 - 00000000cf38f000 (reserved)
  (XEN)  00000000cf38f000 - 00000000cf3ce000 (ACPI data)
  (XEN)  00000000cf3ce000 - 00000000d0000000 (reserved)
  (XEN)  00000000e0000000 - 00000000f0000000 (reserved)
  (XEN)  00000000fe000000 - 0000000100000000 (reserved)
  (XEN)  0000000100000000 - 0000000630000000 (usable)

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[v1: Altered the patch and description with domU's with UNUSABLE regions]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/xen/setup.c |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -213,6 +213,17 @@ static void xen_align_and_add_e820_regio
 	e820_add_region(start, end - start, type);
 }
 
+void xen_ignore_unusable(struct e820entry *list, size_t map_size)
+{
+	struct e820entry *entry;
+	unsigned int i;
+
+	for (i = 0, entry = list; i < map_size; i++, entry++) {
+		if (entry->type == E820_UNUSABLE)
+			entry->type = E820_RAM;
+	}
+}
+
 /**
  * machine_specific_memory_setup - Hook for machine specific memory setup.
  **/
@@ -251,6 +262,17 @@ char * __init xen_memory_setup(void)
 	}
 	BUG_ON(rc);
 
+	/*
+	 * Xen won't allow a 1:1 mapping to be created to UNUSABLE
+	 * regions, so if we're using the machine memory map leave the
+	 * region as RAM as it is in the pseudo-physical map.
+	 *
+	 * UNUSABLE regions in domUs are not handled and will need
+	 * a patch in the future.
+	 */
+	if (xen_initial_domain())
+		xen_ignore_unusable(map, memmap.nr_entries);
+
 	/* Make sure the Xen-supplied memory map is well-ordered. */
 	sanitize_e820_map(map, memmap.nr_entries, &memmap.nr_entries);
 

Re: [ 00/13] 3.4.60-stable review

[Guenter Roeck]

On 08/26/2013 06:08 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.4.60 release.
> There are 13 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Aug 29 01:03:03 UTC 2013.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.60-rc1.gz
> and the diffstat can be found below.
>

Cross build results:
	total: 75 pass: 73 fail: 2
Compared to 3.4.59:
	total: 69 pass: 67 fail: 2

qemu tests:
	mips, mips64, ppc, x86, x86_64: pass (boot to login prompt)
	arm: skipped

More builds, more platforms tested, still only two failures. Results look good.

Details:
	http://server.roeck-us.net:8010/builders

Guenter

Re: [ 00/13] 3.4.60-stable review

[Greg Kroah-Hartman]

On Mon, Aug 26, 2013 at 09:22:41PM -0700, Guenter Roeck wrote:
> On 08/26/2013 06:08 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.4.60 release.
> > There are 13 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu Aug 29 01:03:03 UTC 2013.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.60-rc1.gz
> > and the diffstat can be found below.
> >
> 
> Cross build results:
> 	total: 75 pass: 73 fail: 2
> Compared to 3.4.59:
> 	total: 69 pass: 67 fail: 2
> 
> qemu tests:
> 	mips, mips64, ppc, x86, x86_64: pass (boot to login prompt)
> 	arm: skipped
> 
> More builds, more platforms tested, still only two failures. Results look good.

that's great, thanks.

greg k-h

Re: [ 00/13] 3.4.60-stable review

[Shuah Khan]

On 08/26/2013 07:08 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.4.60 release.
> There are 13 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Aug 29 01:03:03 UTC 2013.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.60-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

3.4.60
-------
3.4.60-rc1 applied cleanly to 3.4.59

Compiled and booted on the following systems:

Samsung Series 9 900X4C Intel Corei5
HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics

dmesgs look good. No regressions compared to the previous dmesgs for 
this release. dmesg emerg, crit, alert, err are clean. No regressions in 
warn.

Cross-compile testing: HP Compaq dc7700 SFF desktop: x86-64 Intel Core-i2:

Cross-compile tests results:

alpha: defconfig passed
arm: defconfig passed
arm64: not applicable
blackfin: defconfig passed
c6x: defconfig passed
mips: defconfig passed
mipsel: defconfig passed
powerpc: wii_defconfig passed
sh: defconfig passed
sparc: defconfig passed
tile: tilegx_defconfig passed

-- Shuah

-- 
Shuah Khan
Senior Linux Kernel Developer - Open Source Group
Samsung Research America(Silicon Valley)
shuah.kh@samsung.com | (970) 672-0658

Re: [ 00/13] 3.4.60-stable review

[Greg Kroah-Hartman]

On Tue, Aug 27, 2013 at 02:42:49PM -0600, Shuah Khan wrote:
> On 08/26/2013 07:08 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.4.60 release.
> > There are 13 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu Aug 29 01:03:03 UTC 2013.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.60-rc1.gz
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
> 
> 3.4.60
> -------
> 3.4.60-rc1 applied cleanly to 3.4.59
> 
> Compiled and booted on the following systems:
> 
> Samsung Series 9 900X4C Intel Corei5
> HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics
> 
> dmesgs look good. No regressions compared to the previous dmesgs for 
> this release. dmesg emerg, crit, alert, err are clean. No regressions in 
> warn.

Thanks for testing and letting me know.

greg k-h