From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Nicholas Bellinger <nab@linux-iscsi.org>
Subject: [ 26/36] iscsi-target: Fix ImmediateData=Yes failure regression in >= v3.10
Date: Thu, 5 Sep 2013 13:27:55 -0700 [thread overview]
Message-ID: <20130905202705.360024790@linuxfoundation.org> (raw)
In-Reply-To: <20130905202702.289738686@linuxfoundation.org>
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <nab@linux-iscsi.org>
commit 9d86a2befceb06ee83c1a588915e6d6e0abef797 upstream.
This patch addresses a regression bug within ImmediateData=Yes failure
handling that ends up triggering an OOPs within >= v3.10 iscsi-target
code.
The problem occurs when iscsit_process_scsi_cmd() does the call to
target_put_sess_cmd(), and once again in iscsit_get_immediate_data()
that is triggered during two different cases:
- When iscsit_sequence_cmd() returns CMDSN_LOWER_THAN_EXP, for which
the descriptor state will already have been set to ISTATE_REMOVE
by iscsit_sequence_cmd(), and
- When iscsi_cmd->sense_reason is set, for which iscsit_execute_cmd()
will have already called transport_send_check_condition_and_sense()
to queue the exception response.
It changes iscsit_process_scsi_cmd() to drop the early call, and makes
iscsit_get_immediate_data() call target_put_sess_cmd() from a single
location after dumping the immediate data for the failed command.
The regression was initially introduced in commit:
commit 561bf15892375597ee59d473a704a3e634c4f311
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Wed Jul 3 03:58:58 2013 -0700
iscsi-target: Fix iscsit_sequence_cmd reject handling for iser
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/target/iscsi/iscsi_target.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1086,7 +1086,6 @@ int iscsit_process_scsi_cmd(struct iscsi
if (cmd->reject_reason)
return 0;
- target_put_sess_cmd(conn->sess->se_sess, &cmd->se_cmd);
return 1;
}
/*
@@ -1124,14 +1123,10 @@ after_immediate_data:
*/
cmdsn_ret = iscsit_sequence_cmd(cmd->conn, cmd,
(unsigned char *)hdr, hdr->cmdsn);
- if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER) {
+ if (cmdsn_ret == CMDSN_ERROR_CANNOT_RECOVER)
return -1;
- } else if (cmdsn_ret == CMDSN_LOWER_THAN_EXP) {
- target_put_sess_cmd(conn->sess->se_sess, &cmd->se_cmd);
- return 0;
- }
- if (cmd->sense_reason) {
+ if (cmd->sense_reason || cmdsn_ret == CMDSN_LOWER_THAN_EXP) {
int rc;
rc = iscsit_dump_data_payload(cmd->conn,
next prev parent reply other threads:[~2013-09-05 20:27 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-05 20:27 [ 00/36] 3.10.11-stable review Greg Kroah-Hartman
2013-09-05 20:27 ` [ 01/36] drm/nouveau/mc: fix race condition between constructor and request_irq() Greg Kroah-Hartman
2013-09-05 20:27 ` [ 02/36] jfs: fix readdir cookie incompatibility with NFSv4 Greg Kroah-Hartman
2013-09-05 20:27 ` [ 03/36] ALSA: hda - Fix NULL dereference with CONFIG_SND_DYNAMIC_MINORS=n Greg Kroah-Hartman
2013-09-05 20:27 ` [ 04/36] ALSA: hda - Add inverted digital mic fixup for Acer Aspire One Greg Kroah-Hartman
2013-09-05 20:27 ` [ 05/36] ALSA: opti9xx: Fix conflicting driver object name Greg Kroah-Hartman
2013-09-05 20:27 ` [ 06/36] powerpc: Work around gcc miscompilation of __pa() on 64-bit Greg Kroah-Hartman
2013-09-05 20:27 ` [ 07/36] powerpc: Dont Oops when accessing /proc/powerpc/lparcfg without hypervisor Greg Kroah-Hartman
2013-09-05 20:27 ` [ 08/36] powerpc/hvsi: Increase handshake timeout from 200ms to 400ms Greg Kroah-Hartman
2013-09-05 20:27 ` [ 09/36] SCSI: pm80xx: fix Adaptec 71605H hang Greg Kroah-Hartman
2013-09-05 20:27 ` [ 10/36] regmap: Add another missing header for !CONFIG_REGMAP stubs Greg Kroah-Hartman
2013-09-05 20:27 ` [ 11/36] timer_list: correct the iterator for timer_list Greg Kroah-Hartman
2013-09-05 20:27 ` [ 12/36] IPC: bugfix for msgrcv with msgtyp < 0 Greg Kroah-Hartman
2013-09-05 20:27 ` [ 13/36] drivers/base/memory.c: fix show_mem_removable() to handle missing sections Greg Kroah-Hartman
2013-09-05 20:27 ` [ 14/36] memcg: check that kmem_cache has memcg_params before accessing it Greg Kroah-Hartman
2013-09-05 20:27 ` [ 15/36] workqueue: cond_resched() after processing each work item Greg Kroah-Hartman
2013-09-05 20:27 ` [ 16/36] drm/vmwgfx: Split GMR2_REMAP commands if they are to large Greg Kroah-Hartman
2013-09-05 20:27 ` [ 17/36] drm/i915: ivb: fix edp voltage swing reg val Greg Kroah-Hartman
2013-09-05 20:27 ` [ 18/36] SUNRPC: Fix memory corruption issue on 32-bit highmem systems Greg Kroah-Hartman
2013-09-05 20:27 ` [ 19/36] x86/mm: Fix boot crash with DEBUG_PAGE_ALLOC=y and more than 512G RAM Greg Kroah-Hartman
2013-09-05 20:27 ` [ 20/36] ath9k_htc: Restore skb headroom when returning skb to mac80211 Greg Kroah-Hartman
2013-09-05 20:27 ` [ 21/36] ath9k: Enable PLL fix only for AR9340/AR9330 Greg Kroah-Hartman
2013-09-05 20:27 ` [ 22/36] mac80211: add missing channel context release Greg Kroah-Hartman
2013-09-05 20:27 ` [ 23/36] mac80211: add a flag to indicate CCK support for HT clients Greg Kroah-Hartman
2013-09-05 20:27 ` [ 24/36] iwl4965: fix rfkill set state regression Greg Kroah-Hartman
2013-09-05 20:27 ` [ 25/36] target: Fix trailing ASCII space usage in INQUIRY vendor+model Greg Kroah-Hartman
2013-09-05 20:27 ` Greg Kroah-Hartman [this message]
2013-09-05 20:27 ` [ 27/36] iscsi-target: Fix iscsit_transport reference leak during NP thread reset Greg Kroah-Hartman
2013-09-05 20:27 ` [ 28/36] iscsi-target: Fix potential NULL pointer in solicited NOPOUT reject Greg Kroah-Hartman
2013-09-05 20:27 ` [ 29/36] mei: me: fix hardware reset flow Greg Kroah-Hartman
2013-09-05 20:27 ` [ 30/36] usb: acm gadget: Null termintate strings table Greg Kroah-Hartman
2013-09-05 20:28 ` [ 31/36] hwmon: (k10temp) Add support for Fam16h (Kabini) Greg Kroah-Hartman
2013-09-05 20:28 ` [ 32/36] ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT Greg Kroah-Hartman
2013-09-05 20:28 ` [ 33/36] drivers/misc/hpilo: Correct panic when an AUX iLO is detected Greg Kroah-Hartman
2013-09-05 20:28 ` [ 34/36] xen/arm: missing put_cpu in xen_percpu_init Greg Kroah-Hartman
2013-09-05 20:28 ` [ 35/36] imx-drm: imx-drm-core: Export imx_drm_encoder_get_mux_id Greg Kroah-Hartman
2013-09-05 20:28 ` [ 36/36] regmap: rbtree: Fix overlapping rbnodes Greg Kroah-Hartman
2013-09-05 22:59 ` [ 00/36] 3.10.11-stable review Guenter Roeck
2013-09-06 16:40 ` Greg Kroah-Hartman
2013-09-06 17:36 ` Shuah Khan
2013-09-06 18:45 ` Greg Kroah-Hartman
2013-09-06 18:48 ` Shuah Khan
2013-09-06 22:08 ` Olof Johansson
2013-09-06 22:20 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130905202705.360024790@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nab@linux-iscsi.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).