* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks [not found] ` <20130818184848.GA2398@pompeji.miese-zwerge.org> @ 2013-09-09 21:58 ` Jochen Striepe 2013-09-09 22:27 ` Paul E. McKenney 0 siblings, 1 reply; 17+ messages in thread From: Jochen Striepe @ 2013-09-09 21:58 UTC (permalink / raw) To: Paul E. McKenney; +Cc: linux-kernel, stable [-- Attachment #1: Type: text/plain, Size: 238 bytes --] Hi again, On Sun, Aug 18, 2013 at 08:48:49PM +0200, Jochen Striepe wrote: > Unfortunately, I was not able to reproduce that behaviour since. I just got this on 3.10.11 on the same machine. Could that be related? Just curious, Jochen. [-- Attachment #2: dmesg --] [-- Type: text/plain, Size: 41294 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.11 (root@sodom) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Sun Sep 8 19:42:24 CEST 2013 [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f64ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f650000-0x000000007f65ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f660000-0x000000007f66dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f66e000-0x000000007f6affff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f6b0000-0x000000007f6bffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f6c8000-0x000000007f7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: ASUSTeK Computer INC. 1201HA/1201HA, BIOS 0210 11/25/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7f650 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 080000000 write-back [ 0.000000] 1 base 07F700000 mask 0FFF00000 uncachable [ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x017fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff] [ 0.000000] [mem 0x37000000-0x373fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff] [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff] [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] BRK [0x0153e000, 0x0153efff] PGTABLE [ 0.000000] RAMDISK: [mem 0x37526000-0x37a8afff] [ 0.000000] Allocated new RAMDISK: [mem 0x36fc1000-0x375252df] [ 0.000000] Move RAMDISK from [mem 0x37526000-0x37a8a2df] to [mem 0x36fc1000-0x375252df] [ 0.000000] ACPI: RSDP 000fbfd0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 7f660100 00064 (v01 _ASUS_ Notebook 20091125 MSFT 00000097) [ 0.000000] ACPI: FACP 7f660290 000F4 (v04 112509 FACP1046 20091125 MSFT 00000097) [ 0.000000] ACPI: DSDT 7f660430 095E0 (v02 A1451 A1451000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 7f66e000 00040 [ 0.000000] ACPI: APIC 7f660390 0005C (v02 112509 APIC1046 20091125 MSFT 00000097) [ 0.000000] ACPI: MCFG 7f6603f0 0003C (v01 112509 OEMMCFG 20091125 MSFT 00000097) [ 0.000000] ACPI: OEMB 7f66e040 0012C (v01 112509 OEMB1046 20091125 MSFT 00000097) [ 0.000000] ACPI: HPET 7f669a10 00038 (v01 112509 OEMHPET 20091125 MSFT 00000097) [ 0.000000] ACPI: GSCI 7f66e170 02024 (v01 112509 GMCHSCI 20091125 MSFT 00000097) [ 0.000000] ACPI: SSDT 7f670b60 004F0 (v01 PmRef CpuPm 00003000 INTL 20060113) [ 0.000000] ACPI: SLIC 7f669a50 00176 (v01 _ASUS_ Notebook 20091125 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x0153f000, 0x0153ffff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0x7f64ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x7f64ffff] [ 0.000000] On node 0 totalpages: 521710 [ 0.000000] free_area_init_node: node 0, pgdat c147f000, node_mem_map f5fd1020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 294482 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 [ 0.000000] e820: [mem 0x7f800000-0xfedfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f77da000 s27456 r0 d21696 u49152 [ 0.000000] pcpu-alloc: s27456 r0 d21696 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519934 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.11 root=/dev/mapper/sodom-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f650) [ 0.000000] Memory: 2058604k/2087232k available (3401k kernel code, 28236k reserved, 1232k data, 368k init, 1177928k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff8e000 - 0xfffff000 ( 452 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1487000 - 0xc14e3000 ( 368 kB) [ 0.000000] .data : 0xc13524cf - 0xc1486580 (1232 kB) [ 0.000000] .text : 0xc1000000 - 0xc13524cf (3401 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1331.243 MHz processor [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2662.48 BogoMIPS (lpj=5324972) [ 0.004013] pid_max: default: 32768 minimum: 301 [ 0.008063] Mount-cache hash table entries: 512 [ 0.008499] Initializing cgroup subsys devices [ 0.008509] Initializing cgroup subsys freezer [ 0.008515] Initializing cgroup subsys net_cls [ 0.008520] Initializing cgroup subsys blkio [ 0.008525] Initializing cgroup subsys perf_event [ 0.008583] Disabled fast string operations [ 0.008593] CPU: Physical Processor ID: 0 [ 0.008597] CPU: Processor Core ID: 0 [ 0.008603] mce: CPU supports 5 MCE banks [ 0.008618] CPU0: Thermal monitoring enabled (TM2) [ 0.008648] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0 [ 0.008648] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8 [ 0.008648] tlb_flushall_shift: 6 [ 0.008759] Freeing SMP alternatives: 16k freed [ 0.008790] ACPI: Core revision 20130328 [ 0.021348] ACPI: All ACPI Tables successfully acquired [ 0.024198] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.024579] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066972] smpboot: CPU0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz (fam: 06, model: 1c, stepping: 02) [ 0.068000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver. [ 0.068000] ... version: 3 [ 0.068000] ... bit width: 40 [ 0.068000] ... generic registers: 2 [ 0.068000] ... value mask: 000000ffffffffff [ 0.068000] ... max period: 000000007fffffff [ 0.068000] ... fixed-purpose events: 3 [ 0.068000] ... event mask: 0000000700000003 [ 0.068000] CPU 1 irqstacks, hard=f58e8000 soft=f58ea000 [ 0.068000] smpboot: Booting Node 0, Processors #1 OK [ 0.008000] Initializing CPU#1 [ 0.008000] Disabled fast string operations [ 0.076118] Brought up 2 CPUs [ 0.076134] smpboot: Total of 2 processors activated (5324.97 BogoMIPS) [ 0.076666] devtmpfs: initialized [ 0.076666] PM: Registering ACPI NVS region [mem 0x7f66e000-0x7f6affff] (270336 bytes) [ 0.076666] regulator-dummy: no parameters [ 0.076666] NET: Registered protocol family 16 [ 0.076864] ACPI: bus type PCI registered [ 0.076871] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.077031] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.077039] PCI: not using MMCONFIG [ 0.077322] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.077326] PCI: Using configuration type 1 for base access [ 0.080464] bio: create slab <bio-0> at 0 [ 0.080464] ACPI: Added _OSI(Module Device) [ 0.080464] ACPI: Added _OSI(Processor Device) [ 0.080464] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.080464] ACPI: Added _OSI(Processor Aggregator Device) [ 0.086397] ACPI: EC: Look up EC in DSDT [ 0.089992] ACPI: Executed 1 blocks of module-level executable AML code [ 0.100318] ACPI BIOS Bug: Warning: Incorrect checksum in table [OEMB] - 0xC1, should be 0x11 (20130328/tbutils-324) [ 0.101057] ACPI: SSDT 7f670270 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20060113) [ 0.101956] ACPI: Dynamic OEM Table Load: [ 0.101964] ACPI: SSDT (null) 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20060113) [ 0.104142] ACPI: SSDT 7f670500 0065D (v01 PmRef Cpu0Cst 00003001 INTL 20060113) [ 0.104984] ACPI: Dynamic OEM Table Load: [ 0.104991] ACPI: SSDT (null) 0065D (v01 PmRef Cpu0Cst 00003001 INTL 20060113) [ 0.105648] ACPI: SSDT 7f6701a0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20060113) [ 0.106520] ACPI: Dynamic OEM Table Load: [ 0.106528] ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20060113) [ 0.106758] ACPI: SSDT 7f670470 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113) [ 0.107600] ACPI: Dynamic OEM Table Load: [ 0.107607] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113) [ 0.108493] ACPI: Interpreter enabled [ 0.108527] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.108541] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.108585] ACPI: (supports S0 S3 S4 S5) [ 0.108591] ACPI: Using IOAPIC for interrupt routing [ 0.108670] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.112140] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.112146] PCI: Using MMCONFIG for extended config space [ 0.112194] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.112472] ACPI: No dock devices found. [ 0.130138] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.134529] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.135171] PCI host bridge to bus 0000:00 [ 0.135183] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.135192] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.135199] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.135206] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.135214] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.135221] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xdfffffff] [ 0.135228] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff] [ 0.135255] pci 0000:00:00.0: [8086:8100] type 00 class 0x060000 [ 0.135493] pci 0000:00:02.0: [8086:8108] type 00 class 0x030000 [ 0.135524] pci 0000:00:02.0: reg 10: [mem 0xf3f80000-0xf3ffffff] [ 0.135540] pci 0000:00:02.0: reg 14: [io 0xc880-0xc887] [ 0.135555] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff] [ 0.135571] pci 0000:00:02.0: reg 1c: [mem 0xf3f40000-0xf3f7ffff] [ 0.135848] pci 0000:00:1b.0: [8086:811b] type 00 class 0x040300 [ 0.135876] pci 0000:00:1b.0: reg 10: [mem 0xf3f38000-0xf3f3bfff 64bit] [ 0.135960] pci 0000:00:1b.0: PME# supported from D0 D3hot [ 0.136169] pci 0000:00:1c.0: [8086:8110] type 01 class 0x060400 [ 0.136257] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.136364] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.136464] pci 0000:00:1c.1: [8086:8112] type 01 class 0x060400 [ 0.136551] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.136656] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.136766] pci 0000:00:1d.0: [8086:8114] type 00 class 0x0c0300 [ 0.136816] pci 0000:00:1d.0: reg 20: [io 0xb880-0xb89f] [ 0.136978] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.137080] pci 0000:00:1d.1: [8086:8115] type 00 class 0x0c0300 [ 0.137131] pci 0000:00:1d.1: reg 20: [io 0xc080-0xc09f] [ 0.137292] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.137391] pci 0000:00:1d.2: [8086:8116] type 00 class 0x0c0300 [ 0.137442] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f] [ 0.137603] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.137722] pci 0000:00:1d.7: [8086:8117] type 00 class 0x0c0320 [ 0.137759] pci 0000:00:1d.7: reg 10: [mem 0xf3f37c00-0xf3f37fff] [ 0.137893] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.138007] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.138110] pci 0000:00:1f.0: [8086:8119] type 00 class 0x060100 [ 0.138347] pci 0000:00:1f.1: [8086:811a] type 00 class 0x010180 [ 0.138399] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.138706] pci 0000:03:00.0: [1969:1062] type 00 class 0x020000 [ 0.138743] pci 0000:03:00.0: reg 10: [mem 0xfbfc0000-0xfbffffff 64bit] [ 0.138764] pci 0000:03:00.0: reg 18: [io 0xe880-0xe8ff] [ 0.138893] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.148036] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.148047] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.148057] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.148198] pci 0000:01:00.0: [168c:002b] type 00 class 0x028000 [ 0.148234] pci 0000:01:00.0: reg 10: [mem 0xfbef0000-0xfbefffff 64bit] [ 0.148367] pci 0000:01:00.0: supports D1 [ 0.148374] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.156028] pci 0000:00:1c.1: PCI bridge to [bus 01-02] [ 0.156039] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.156049] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xfbefffff] [ 0.156059] pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff pref] [ 0.156078] pci_bus 0000:00: on NUMA node 0 [ 0.156089] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.156096] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.157467] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.157672] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.157871] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.158071] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.158279] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.158481] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.158681] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.158881] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.159362] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.159382] acpi root: \_SB_.PCI0 notify handler is installed [ 0.159510] Found 1 acpi root devices [ 0.159694] ACPI: EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62 [ 0.160054] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.160065] vgaarb: loaded [ 0.160069] vgaarb: bridge control possible 0000:00:02.0 [ 0.160122] PCI: Using ACPI for IRQ routing [ 0.160183] PCI: pci_cache_line_size set to 64 bytes [ 0.160249] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.160256] e820: reserve RAM buffer [mem 0x7f650000-0x7fffffff] [ 0.160595] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.160606] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.160618] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.164053] Switching to clocksource hpet [ 0.164190] pnp: PnP ACPI init [ 0.164222] ACPI: bus type PNP registered [ 0.164612] system 00:00: [mem 0x7f800000-0x7fffffff] has been reserved [ 0.164625] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.164748] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.164909] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.164993] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.165086] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.165585] system 00:05: [io 0x0374-0x0375] has been reserved [ 0.165596] system 00:05: [io 0x03f4-0x03f5] has been reserved [ 0.165604] system 00:05: [io 0x0380-0x0387] has been reserved [ 0.165612] system 00:05: [io 0x09f4-0x09ff] has been reserved [ 0.165620] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.165628] system 00:05: [io 0x0900-0x09f3] has been reserved [ 0.165636] system 00:05: [io 0x0400-0x043f] has been reserved [ 0.165644] system 00:05: [io 0x0480-0x04bf] has been reserved [ 0.165653] system 00:05: [mem 0xf0000000-0xf0003fff] has been reserved [ 0.165661] system 00:05: [mem 0x00000384-0x00000387] could not be reserved [ 0.165671] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.165792] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.166003] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active) [ 0.166209] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.166550] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.166561] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.166570] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.166791] pnp 00:0a: Plug and Play ACPI device, IDs SYN0a13 SYN0a01 SYN0a04 SYN0002 PNP0f13 (active) [ 0.166971] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.166982] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.167609] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.167620] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.167629] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.167637] system 00:0c: [mem 0x00100000-0x7f7fffff] could not be reserved [ 0.167647] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.168212] pnp: PnP ACPI: found 13 devices [ 0.168218] ACPI: bus type PNP unregistered [ 0.209229] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff pref] to [bus 03] add_size 200000 [ 0.209254] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000 [ 0.209270] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff pref] [ 0.209279] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.209288] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.209300] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.209309] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff pref] [ 0.209322] pci 0000:00:1c.1: PCI bridge to [bus 01-02] [ 0.209330] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.209340] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xfbefffff] [ 0.209350] pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff pref] [ 0.209644] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.209653] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.209661] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.209668] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.209675] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xdfffffff] [ 0.209682] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff] [ 0.209690] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.209697] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.209704] pci_bus 0000:03: resource 2 [mem 0x80000000-0x801fffff pref] [ 0.209712] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.209719] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xfbefffff] [ 0.209727] pci_bus 0000:01: resource 2 [mem 0xcc000000-0xcfffffff pref] [ 0.209856] NET: Registered protocol family 2 [ 0.210306] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.210381] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.210451] TCP: Hash tables configured (established 8192 bind 8192) [ 0.210561] TCP: reno registered [ 0.210570] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.210591] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.210777] NET: Registered protocol family 1 [ 0.210824] pci 0000:00:02.0: Boot video device [ 0.211827] PCI: CLS 32 bytes, default 64 [ 0.211962] Unpacking initramfs... [ 0.515794] Freeing initrd memory: 5524k freed [ 0.525190] audit: initializing netlink socket (disabled) [ 0.525228] type=2000 audit(1378762092.524:1): initialized [ 0.525848] bounce pool size: 64 pages [ 0.525884] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.526514] VFS: Disk quotas dquot_6.5.2 [ 0.526587] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.526826] msgmni has been set to 1730 [ 0.527529] alg: No test for stdrng (krng) [ 0.527608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.527616] io scheduler noop registered [ 0.527621] io scheduler deadline registered [ 0.527654] io scheduler cfq registered (default) [ 0.527993] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.528100] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.528272] intel_idle: MWAIT substates: 0x3020220 [ 0.528288] intel_idle: v0.4 model 0x1C [ 0.528293] intel_idle: lapic_timer_reliable_states 0x2 [ 0.528299] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2 [ 0.528390] GHES: HEST is not enabled! [ 0.528532] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.529801] Linux agpgart interface v0.103 [ 0.529997] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.552901] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.552922] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.553300] mousedev: PS/2 mouse device common for all mice [ 0.554403] rtc_cmos 00:01: RTC can wake from S4 [ 0.554625] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.554665] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.554830] cpuidle: using governor ladder [ 0.554999] cpuidle: using governor menu [ 0.555223] TCP: cubic registered [ 0.555310] NET: Registered protocol family 10 [ 0.555794] mip6: Mobile IPv6 [ 0.555803] NET: Registered protocol family 17 [ 0.555842] Key type dns_resolver registered [ 0.556270] Using IPI No-Shortcut mode [ 0.556585] registered taskstats version 1 [ 0.557429] rtc_cmos 00:01: setting system clock to 2013-09-09 21:28:13 UTC (1378762093) [ 0.557706] Freeing unused kernel memory: 368k freed [ 0.578422] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.700477] udevd[56]: starting version 175 [ 0.776723] ACPI: bus type USB registered [ 0.776853] usbcore: registered new interface driver usbfs [ 0.776921] usbcore: registered new interface driver hub [ 0.790793] usbcore: registered new device driver usb [ 0.792152] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.793070] uhci_hcd: USB Universal Host Controller Interface driver [ 0.793351] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.793368] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.793395] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.793510] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b880 [ 0.793675] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.793688] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.793699] usb usb1: Product: UHCI Host Controller [ 0.793708] usb usb1: Manufacturer: Linux 3.10.11 uhci_hcd [ 0.793716] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.796642] ehci-pci: EHCI PCI platform driver [ 0.799957] hub 1-0:1.0: USB hub found [ 0.799983] hub 1-0:1.0: 2 ports detected [ 0.800809] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 0.801105] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.801135] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.801180] ehci-pci 0000:00:1d.7: debug port 1 [ 0.805178] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 0.816797] ehci-pci 0000:00:1d.7: irq 19, io mem 0xf3f37c00 [ 0.828088] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.828174] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.828186] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.828195] usb usb2: Product: EHCI Host Controller [ 0.828203] usb usb2: Manufacturer: Linux 3.10.11 ehci_hcd [ 0.828211] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.828624] hub 2-0:1.0: USB hub found [ 0.828642] hub 2-0:1.0: 8 ports detected [ 0.838091] SCSI subsystem initialized [ 0.844946] atl1c 0000:03:00.0: version 1.0.1.1-NAPI [ 0.852262] hub 1-0:1.0: USB hub found [ 0.852290] hub 1-0:1.0: 2 ports detected [ 0.853430] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.853447] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.853479] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.853588] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000c080 [ 0.853753] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.853766] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.853774] usb usb3: Product: UHCI Host Controller [ 0.853783] usb usb3: Manufacturer: Linux 3.10.11 uhci_hcd [ 0.853792] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.854657] hub 3-0:1.0: USB hub found [ 0.854683] hub 3-0:1.0: 2 ports detected [ 0.855396] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.855413] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.855439] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.855554] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480 [ 0.855732] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.855744] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.855753] usb usb4: Product: UHCI Host Controller [ 0.855762] usb usb4: Manufacturer: Linux 3.10.11 uhci_hcd [ 0.855771] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.856301] hub 4-0:1.0: USB hub found [ 0.856322] hub 4-0:1.0: 2 ports detected [ 0.877837] ACPI: bus type ATA registered [ 0.893395] libata version 3.00 loaded. [ 0.894097] pata_sch 0000:00:1f.1: version 0.2 [ 0.894262] pata_sch 0000:00:1f.1: setting latency timer to 64 [ 0.901142] scsi0 : pata_sch [ 0.917197] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.917211] ACPI: Thermal Zone [TZ00] (41 C) [ 0.917743] scsi1 : pata_sch [ 0.918034] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.918045] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.134186] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133 [ 1.134217] ata1.00: 488397168 sectors, multi 16: LBA48 [ 1.140313] usb 2-5: new high-speed USB device number 2 using ehci-pci [ 1.149284] ata1.00: configured for UDMA/100 [ 1.149805] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5 [ 1.285566] usb 2-5: New USB device found, idVendor=13d3, idProduct=5111 [ 1.285585] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=2 [ 1.285598] usb 2-5: Product: USB2.0 UVC VGA WebCam [ 1.285620] usb 2-5: Manufacturer: Image Processor [ 1.285628] usb 2-5: SerialNumber: USB2.0 UVC VGA WebCam [ 1.325794] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.326109] sd 0:0:0:0: [sda] Write Protect is off [ 1.326123] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.326258] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.346979] sda: sda1 sda2 < sda5 > [ 1.348548] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.353614] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.702274] device-mapper: uevent: version 1.0.3 [ 1.702465] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 13.831981] bio: create slab <bio-1> at 1 [ 14.105068] bio: create slab <bio-1> at 1 [ 15.022966] PM: Starting manual resume from disk [ 15.077941] kjournald starting. Commit interval 5 seconds [ 15.078010] EXT3-fs (dm-1): mounted filesystem with ordered data mode [ 17.384930] udevd[401]: starting version 175 [ 177.627057] INFO: rcu_sched self-detected stall on CPU { 0} (t=39983 jiffies g=13 c=12 q=11) [ 177.627087] sending NMI to all CPUs: [ 177.627104] NMI backtrace for cpu 0 [ 177.627121] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.11 #1 [ 177.627209] Hardware name: ASUSTeK Computer INC. 1201HA/1201HA, BIOS 0210 11/25/2009 [ 177.627338] task: c144e1a0 ti: f5806000 task.ti: c1442000 [ 177.627458] EIP: 0060:[<c1021b8d>] EFLAGS: 00200006 CPU: 0 [ 177.627479] EIP is at arch_trigger_all_cpu_backtrace+0x4d/0x70 [ 177.627487] EAX: 00418958 EBX: 00002710 ECX: c1455ba0 EDX: fffff000 [ 177.627494] ESI: c145a300 EDI: 0000000b EBP: c145a300 ESP: f5807ea4 [ 177.627502] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 177.627509] CR0: 8005003b CR2: b760d7c0 CR3: 014ea000 CR4: 000007d0 [ 177.627516] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 177.627522] DR6: ffff0ff0 DR7: 00000400 [ 177.627527] Stack: [ 177.627635] c13da377 f77dcdc0 c109c514 c13e7e94 00009c2f 0000000d 0000000c 0000000b [ 177.627652] c105912c 00000001 00000000 f77dcdc0 c14827f0 c144e1a0 c144e1a0 00000000 [ 177.627667] 00000000 c1443ebc c103ca66 f77dcc00 5b6595ac 00000029 c10749dc f77dca50 [ 177.627683] Call Trace: [ 177.627806] [<c109c514>] ? rcu_check_callbacks+0x294/0x4d0 [ 177.627820] [<c105912c>] ? account_system_time+0xac/0x170 [ 177.627832] [<c103ca66>] ? update_process_times+0x36/0x70 [ 177.627845] [<c10749dc>] ? tick_sched_timer+0x3c/0x80 [ 177.627857] [<c104f397>] ? __remove_hrtimer+0x47/0xa0 [ 177.627867] [<c104f481>] ? __run_hrtimer.isra.29+0x41/0xc0 [ 177.627879] [<c10500c5>] ? hrtimer_interrupt+0x205/0x290 [ 177.627892] [<c1073ab3>] ? tick_do_broadcast.constprop.8+0x63/0x70 [ 177.627903] [<c1073c48>] ? tick_handle_oneshot_broadcast+0x108/0x150 [ 177.627915] [<c1003aea>] ? timer_interrupt+0xa/0x10 [ 177.627926] [<c10946be>] ? handle_irq_event_percpu+0x2e/0x140 [ 177.627937] [<c102227a>] ? io_apic_modify_irq.isra.13+0x4a/0x60 [ 177.627948] [<c10947fe>] ? handle_irq_event+0x2e/0x50 [ 177.627958] [<c10968e0>] ? handle_simple_irq+0x60/0x60 [ 177.627968] [<c109693a>] ? handle_edge_irq+0x5a/0xe0 [ 177.627974] <IRQ> [ 177.628025] [<c10032ae>] ? do_IRQ+0x3e/0xc0 [ 177.628221] [<f80b46d2>] ? scsi_io_completion+0x1d2/0x650 [scsi_mod] [ 177.628234] [<c13518b3>] ? common_interrupt+0x33/0x38 [ 177.628249] [<c10375c1>] ? __do_softirq+0x71/0x160 [ 177.628260] [<c107491a>] ? tick_do_update_jiffies64+0xda/0x130 [ 177.628271] [<c10377d5>] ? irq_exit+0x85/0x90 [ 177.628281] [<c10032b7>] ? do_IRQ+0x47/0xc0 [ 177.628292] [<c10513e4>] ? notifier_call_chain+0x44/0x60 [ 177.628303] [<c13518b3>] ? common_interrupt+0x33/0x38 [ 177.628315] [<c106007b>] ? unregister_fair_sched_group+0xb/0xa0 [ 177.628328] [<c125ec48>] ? cpuidle_enter_state+0x48/0xd0 [ 177.628339] [<c125ed51>] ? cpuidle_idle_call+0x81/0x110 [ 177.628351] [<c10091f5>] ? arch_cpu_idle+0x5/0x20 [ 177.628361] [<c106b839>] ? cpu_startup_entry+0x89/0x160 [ 177.628372] [<c1487a04>] ? start_kernel+0x332/0x338 [ 177.628383] [<c1487513>] ? repair_env_string+0x4d/0x4d [ 177.628388] Code: 24 77 a3 3d c1 a3 e0 26 48 c1 e8 12 9e 32 00 8b 15 80 5b 45 c1 b8 02 00 00 00 ff 52 7c eb 16 8d b4 26 00 00 00 00 b8 58 89 41 00 <e8> 1e a6 16 00 83 eb 01 74 09 f6 05 e0 26 48 c1 03 75 e8 f0 80 [ 17.699240] NMI backtrace for cpu 1 [ 17.699240] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.10.11 #1 [ 17.699240] Hardware name: ASUSTeK Computer INC. 1201HA/1201HA, BIOS 0210 11/25/2009 [ 17.699240] task: f58d5100 ti: f58da000 task.ti: f58da000 [ 17.699240] EIP: 0060:[<c106b8b2>] EFLAGS: 00200246 CPU: 1 [ 17.699240] EIP is at cpu_startup_entry+0x102/0x160 [ 17.699240] EAX: 00000000 EBX: c14827ec ECX: 00000000 EDX: f58da000 [ 17.699240] ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: f58dbf8c [ 17.699240] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 17.699240] CR0: 8005003b CR2: b7751000 CR3: 014ea000 CR4: 000007d0 [ 17.699240] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 17.699240] DR6: ffff0ff0 DR7: 00000400 [ 17.699240] Stack: [ 17.699240] a4feb007 28177815 3bab36a1 c13477c6 dbd7ffff ff7fffe3 00000000 00000000 [ 17.699240] 1c2768e2 3bab36a1 01020800 00000000 00000000 00000000 00000000 00000000 [ 17.699240] 00000000 0000007b 0000007b 000000d8 000000e0 ffffffff 00000000 00000060 [ 17.699240] Call Trace: [ 17.699240] [<c13477c6>] ? start_secondary+0x1e6/0x1ec [ 17.699240] Code: c1 85 c0 74 84 e8 ef fb 02 00 fb 89 e0 25 00 e0 ff ff 8b 40 08 a8 08 75 19 89 e2 81 e2 00 e0 ff ff 90 8d b4 26 00 00 00 00 f3 90 <8b> 42 08 a8 08 74 f7 e8 32 fb 02 00 eb 96 e8 1b d9 f9 ff eb b6 [ 178.738590] microcode: CPU0 sig=0x106c2, pf=0x1, revision=0x211 [ 178.786066] ACPI Warning: 0x00000400-0x0000043f SystemIO conflicts with Region \SMRG 1 (20130328/utaddress-251) [ 178.786091] ACPI Warning: 0x00000400-0x0000043f SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMRG 2 (20130328/utaddress-251) [ 178.786108] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 178.786130] lpc_sch: probe of 0000:00:1f.0 failed with error -16 [ 178.792648] microcode: CPU1 sig=0x106c2, pf=0x1, revision=0x211 [ 178.792862] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 179.002143] ACPI: Battery Slot [BAT0] (battery absent) [ 179.062017] ACPI: Requesting acpi_cpufreq [ 179.062650] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 179.087572] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 179.105330] ACPI: Lid Switch [LID] [ 179.105526] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 179.105709] ACPI: Sleep Button [SLPB] [ 179.105920] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 179.106095] ACPI: Power Button [PWRB] [ 179.113736] ACPI: AC Adapter [AC0] (on-line) [ 179.405177] wmi: Mapper loaded [ 179.443781] cfg80211: Calling CRDA to update world regulatory domain [ 179.613012] asus_wmi: ASUS WMI generic driver loaded [ 179.643415] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.5 [ 179.643788] asus_wmi: SFUN value: 0x0<6>[ 179.653935] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5 [ 179.762825] asus_wmi: Backlight controlled by ACPI video driver [ 179.906238] [drm] Initialized drm 1.1.0 20060810 [ 180.124494] gma500 0000:00:02.0: setting latency timer to 64 [ 180.167181] acpi device:0c: registered as cooling_device2 [ 180.167272] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 180.169680] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 180.170790] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 180.170802] [drm] No driver support for vblank timestamp query. [ 180.181349] ath: phy0: ASPM enabled: 0x42 [ 180.181354] ath: EEPROM regdomain: 0x60 [ 180.181356] ath: EEPROM indicates we should expect a direct regpair map [ 180.181362] ath: Country alpha2 being used: 00 [ 180.181364] ath: Regpair used: 0x60 [ 180.425211] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 180.426038] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8420000, irq=17 [ 180.909990] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 600854 [ 181.000052] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 181.628426] fbcon: psbdrmfb (fb0) is primary device [ 181.937701] Console: switching to colour frame buffer device 170x48 [ 181.953015] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device [ 181.953024] gma500 0000:00:02.0: registered panic notifier [ 181.955397] gma500 0000:00:02.0: Backlight lvds set brightness 7a127a12 [ 181.955446] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0 [ 182.052251] gma500 0000:00:02.0: Backlight lvds set brightness 7a127a12 [ 182.141387] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 182.146276] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 182.146594] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 182.147652] EXT3-fs (dm-1): using internal journal [ 183.484476] loop: module loaded [ 184.105577] Adding 4030460k swap on /dev/mapper/sodom-swap_1. Priority:-1 extents:1 across:4030460k FS [ 185.215110] kjournald starting. Commit interval 5 seconds [ 185.221099] EXT3-fs (dm-3): using internal journal [ 185.221112] EXT3-fs (dm-3): mounted filesystem with ordered data mode [ 187.906409] atl1c 0000:03:00.0: irq 40 for MSI/MSI-X [ 187.906558] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 188.134693] RPC: Registered named UNIX socket transport module. [ 188.134707] RPC: Registered udp transport module. [ 188.134714] RPC: Registered tcp transport module. [ 188.134720] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 188.202985] FS-Cache: Loaded [ 188.257220] FS-Cache: Netfs 'nfs' registered for caching [ 188.329476] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [-- Attachment #3: config-3.10.11 --] [-- Type: text/plain, Size: 97498 bytes --] # # Automatically generated file; DO NOT EDIT. # Linux/i386 3.10.11 Kernel Configuration # # CONFIG_64BIT is not set CONFIG_X86_32=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_ARCH_HAS_CPU_AUTOPROBE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_ZONE_DMA32 is not set # CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_X86_32_SMP=y CONFIG_X86_HT=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" CONFIG_ARCH_CPU_PROBE_RELEASE=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_FHANDLE=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_WATCH=y CONFIG_AUDIT_TREE=y CONFIG_AUDIT_LOGINUID_IMMUTABLE=y CONFIG_HAVE_GENERIC_HARDIRQS=y # # IRQ subsystem # CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_IRQ_DOMAIN=y # CONFIG_IRQ_DOMAIN_DEBUG is not set CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_KTIME_SCALAR=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y CONFIG_GENERIC_CMOS_UPDATE=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ_COMMON=y # CONFIG_HZ_PERIODIC is not set CONFIG_NO_HZ_IDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_IRQ_TIME_ACCOUNTING is not set CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_PREEMPT_RCU is not set CONFIG_RCU_STALL_COMMON=y CONFIG_RCU_FANOUT=32 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_FANOUT_EXACT is not set CONFIG_RCU_FAST_NO_HZ=y # CONFIG_TREE_RCU_TRACE is not set # CONFIG_RCU_NOCB_CPU is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y # CONFIG_MEMCG is not set # CONFIG_CGROUP_HUGETLB is not set CONFIG_CGROUP_PERF=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_CFS_BANDWIDTH is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_BLK_CGROUP=y # CONFIG_DEBUG_BLK_CGROUP is not set # CONFIG_CHECKPOINT_RESTORE is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y # CONFIG_USER_NS is not set CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_UIDGID_CONVERTED=y # CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set CONFIG_SCHED_AUTOGROUP=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_HAVE_UID16=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HOTPLUG=y CONFIG_HAVE_PCSPKR_PLATFORM=y # CONFIG_EXPERT is not set CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_PCI_QUIRKS=y # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y CONFIG_VM_EVENT_COUNTERS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y CONFIG_OPROFILE_NMI_TIMER=y # CONFIG_KPROBES is not set CONFIG_JUMP_LABEL=y # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP_FILTER=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_MODULES_USE_ELF_REL=y CONFIG_CLONE_BACKWARDS=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_OLD_SIGACTION=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBDAF=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_BLK_DEV_THROTTLING is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set CONFIG_KARMA_PARTITION=y # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_CFQ_GROUP_IOSCHED=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PADATA=y CONFIG_INLINE_SPIN_UNLOCK_IRQ=y CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_FREEZER=y # # Processor type and features # CONFIG_ZONE_DMA=y CONFIG_SMP=y CONFIG_X86_MPPARSE=y # CONFIG_X86_BIGSMP is not set # CONFIG_X86_EXTENDED_PLATFORM is not set # CONFIG_X86_GOLDFISH is not set # CONFIG_X86_INTEL_LPSS is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y # CONFIG_X86_32_IRIS is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_HYPERVISOR_GUEST is not set CONFIG_NO_BOOTMEM=y CONFIG_MEMTEST=y # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MELAN is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MCORE2 is not set CONFIG_MATOM=y # CONFIG_X86_GENERIC is not set CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=5 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_NR_CPUS=2 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y # CONFIG_X86_MCE_AMD is not set # CONFIG_X86_ANCIENT_MCE is not set CONFIG_X86_MCE_THRESHOLD=y # CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=y CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set CONFIG_X86_REBOOTFIXUPS=y CONFIG_MICROCODE=m CONFIG_MICROCODE_INTEL=y # CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_MICROCODE_INTEL_LIB=y CONFIG_MICROCODE_INTEL_EARLY=y CONFIG_MICROCODE_EARLY=y CONFIG_X86_MSR=m CONFIG_X86_CPUID=m # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ILLEGAL_POINTER_VALUE=0 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_MEMORY_ISOLATION=y # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_COMPACTION=y CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_NEED_BOUNCE_POOL=y CONFIG_VIRT_TO_BUS=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y CONFIG_MEMORY_FAILURE=y CONFIG_TRANSPARENT_HUGEPAGE=y # CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y # CONFIG_CROSS_MEMORY_ATTACH is not set # CONFIG_CLEANCACHE is not set CONFIG_FRONTSWAP=y CONFIG_HIGHPTE=y # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW=64 # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y CONFIG_X86_SMAP=y # CONFIG_EFI is not set CONFIG_SECCOMP=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y # CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y # CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set # CONFIG_DEBUG_HOTPLUG_CPU0 is not set # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATE_CALLBACKS=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y # CONFIG_PM_AUTOSLEEP is not set CONFIG_PM_WAKELOCKS=y CONFIG_PM_WAKELOCKS_LIMIT=100 CONFIG_PM_WAKELOCKS_GC=y CONFIG_PM_RUNTIME=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y # CONFIG_ACPI_PROCFS is not set # CONFIG_ACPI_PROCFS_POWER is not set # CONFIG_ACPI_EC_DEBUGFS is not set # CONFIG_ACPI_PROC_EVENT is not set CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_DOCK=y CONFIG_ACPI_I2C=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_IPMI=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_PROCESSOR_AGGREGATOR=m CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y CONFIG_ACPI_SBS=m CONFIG_ACPI_HED=y # CONFIG_ACPI_CUSTOM_METHOD is not set CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=y CONFIG_ACPI_APEI_PCIEAER=y CONFIG_ACPI_APEI_MEMORY_FAILURE=y # CONFIG_ACPI_APEI_EINJ is not set # CONFIG_ACPI_APEI_ERST_DEBUG is not set CONFIG_SFI=y CONFIG_X86_APM_BOOT=y CONFIG_APM=m # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_ALLOW_INTS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=m # CONFIG_CPU_FREQ_STAT_DETAILS is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m # # x86 CPU frequency scaling drivers # # CONFIG_X86_INTEL_PSTATE is not set CONFIG_X86_PCC_CPUFREQ=m CONFIG_X86_ACPI_CPUFREQ=m CONFIG_X86_ACPI_CPUFREQ_CPB=y CONFIG_X86_POWERNOW_K6=m CONFIG_X86_POWERNOW_K7=m CONFIG_X86_POWERNOW_K7_ACPI=y CONFIG_X86_POWERNOW_K8=m # CONFIG_X86_AMD_FREQ_SENSITIVITY is not set CONFIG_X86_GX_SUSPMOD=m CONFIG_X86_SPEEDSTEP_CENTRINO=m CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y CONFIG_X86_SPEEDSTEP_ICH=m CONFIG_X86_SPEEDSTEP_SMI=m CONFIG_X86_P4_CLOCKMOD=m CONFIG_X86_CPUFREQ_NFORCE2=m CONFIG_X86_LONGRUN=m CONFIG_X86_LONGHAUL=m # CONFIG_X86_E_POWERSAVER is not set # # shared options # CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y CONFIG_CPU_IDLE=y # CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set CONFIG_INTEL_IDLE=y # # Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=y CONFIG_PCIEAER=y # CONFIG_PCIE_ECRC is not set # CONFIG_PCIEAER_INJECT is not set CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set # CONFIG_PCIEASPM_DEFAULT is not set CONFIG_PCIEASPM_POWERSAVE=y # CONFIG_PCIEASPM_PERFORMANCE is not set CONFIG_PCIE_PME=y CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set CONFIG_PCI_STUB=m CONFIG_HT_IRQ=y CONFIG_PCI_ATS=y CONFIG_PCI_IOV=y # CONFIG_PCI_PRI is not set # CONFIG_PCI_PASID is not set CONFIG_PCI_IOAPIC=y CONFIG_PCI_LABEL=y CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_SCx200 is not set # CONFIG_OLPC is not set # CONFIG_ALIX is not set # CONFIG_NET5501 is not set # CONFIG_GEOS is not set CONFIG_AMD_NB=y CONFIG_PCCARD=m CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=m CONFIG_YENTA_O2=y CONFIG_YENTA_RICOH=y CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y CONFIG_PD6729=m CONFIG_I82092=m CONFIG_PCCARD_NONSTATIC=y CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_COMPAQ is not set # CONFIG_HOTPLUG_PCI_IBM is not set CONFIG_HOTPLUG_PCI_ACPI=y CONFIG_HOTPLUG_PCI_ACPI_IBM=m # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # CONFIG_RAPIDIO is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_BINFMT_SCRIPT=y CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_COREDUMP=y CONFIG_HAVE_ATOMIC_IOMAP=y CONFIG_HAVE_TEXT_POKE_SMP=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_DIAG=y CONFIG_UNIX=y CONFIG_UNIX_DIAG=y CONFIG_XFRM=y CONFIG_XFRM_ALGO=m CONFIG_XFRM_USER=m CONFIG_XFRM_SUB_POLICY=y CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_IP_FIB_TRIE_STATS=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_ROUTE_CLASSID=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IP_TUNNEL=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_MROUTE_MULTIPLE_TABLES=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_LRO=m CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m CONFIG_INET_UDP_DIAG=m CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y CONFIG_IPV6_OPTIMISTIC_DAD=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=y CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m CONFIG_IPV6_SIT_6RD=y CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_GRE=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y CONFIG_IPV6_MROUTE=y CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y CONFIG_IPV6_PIMSM_V2=y CONFIG_NETWORK_SECMARK=y # CONFIG_NETWORK_PHY_TIMESTAMPING is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=y # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=m # CONFIG_NETFILTER_NETLINK_ACCT is not set CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_ZONES=y # CONFIG_NF_CONNTRACK_PROCFS is not set CONFIG_NF_CONNTRACK_EVENTS=y # CONFIG_NF_CONNTRACK_TIMEOUT is not set CONFIG_NF_CONNTRACK_TIMESTAMP=y CONFIG_NF_CONNTRACK_LABELS=y CONFIG_NF_CT_PROTO_DCCP=m CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_BROADCAST=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m # CONFIG_NF_CT_NETLINK_TIMEOUT is not set # CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_NF_NAT_PROTO_DCCP=m CONFIG_NF_NAT_PROTO_UDPLITE=m CONFIG_NF_NAT_PROTO_SCTP=m CONFIG_NF_NAT_AMANDA=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_SIP=m CONFIG_NF_NAT_TFTP=m CONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=m # # Xtables combined modules # CONFIG_NETFILTER_XT_MARK=m CONFIG_NETFILTER_XT_CONNMARK=m CONFIG_NETFILTER_XT_SET=m # # Xtables targets # CONFIG_NETFILTER_XT_TARGET_AUDIT=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_CT=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_HL=m # CONFIG_NETFILTER_XT_TARGET_HMARK is not set CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m CONFIG_NETFILTER_XT_TARGET_LED=m CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NETMAP=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_REDIRECT=m CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m # # Xtables matches # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_CPU=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ECN=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_IPVS=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m # CONFIG_NETFILTER_XT_MATCH_NFACCT is not set CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_RECENT=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_IP_SET=m CONFIG_IP_SET_MAX=256 CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m CONFIG_IP_SET_HASH_NET=m CONFIG_IP_SET_HASH_NETPORT=m CONFIG_IP_SET_HASH_NETIFACE=m CONFIG_IP_SET_LIST_SET=m CONFIG_IP_VS=m CONFIG_IP_VS_IPV6=y # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 # # IPVS transport protocol load balancing support # CONFIG_IP_VS_PROTO_TCP=y CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_AH_ESP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y CONFIG_IP_VS_PROTO_SCTP=y # # IPVS scheduler # CONFIG_IP_VS_RR=m CONFIG_IP_VS_WRR=m CONFIG_IP_VS_LC=m CONFIG_IP_VS_WLC=m CONFIG_IP_VS_LBLC=m CONFIG_IP_VS_LBLCR=m CONFIG_IP_VS_DH=m CONFIG_IP_VS_SH=m CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m # # IPVS SH scheduler # CONFIG_IP_VS_SH_TAB_BITS=8 # # IPVS application helper # CONFIG_IP_VS_FTP=m CONFIG_IP_VS_NFCT=y CONFIG_IP_VS_PE_SIP=m # # IP: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV6=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m CONFIG_NF_NAT_IPV6=m CONFIG_IP6_NF_TARGET_MASQUERADE=m CONFIG_IP6_NF_TARGET_NPT=m # # DECnet: Netfilter Configuration # CONFIG_DECNET_NF_GRABULATOR=m CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m CONFIG_BRIDGE_EBT_T_NAT=m CONFIG_BRIDGE_EBT_802_3=m CONFIG_BRIDGE_EBT_AMONG=m CONFIG_BRIDGE_EBT_ARP=m CONFIG_BRIDGE_EBT_IP=m CONFIG_BRIDGE_EBT_IP6=m CONFIG_BRIDGE_EBT_LIMIT=m CONFIG_BRIDGE_EBT_MARK=m CONFIG_BRIDGE_EBT_PKTTYPE=m CONFIG_BRIDGE_EBT_STP=m CONFIG_BRIDGE_EBT_VLAN=m CONFIG_BRIDGE_EBT_ARPREPLY=m CONFIG_BRIDGE_EBT_DNAT=m CONFIG_BRIDGE_EBT_MARK_T=m CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE_EBT_ULOG=m CONFIG_BRIDGE_EBT_NFLOG=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m # # DCCP CCIDs Configuration # # CONFIG_IP_DCCP_CCID2_DEBUG is not set CONFIG_IP_DCCP_CCID3=y # CONFIG_IP_DCCP_CCID3_DEBUG is not set CONFIG_IP_DCCP_TFRC_LIB=y CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set CONFIG_SCTP_COOKIE_HMAC_MD5=y CONFIG_SCTP_COOKIE_HMAC_SHA1=y CONFIG_RDS=m CONFIG_RDS_TCP=m # CONFIG_RDS_DEBUG is not set CONFIG_TIPC=m CONFIG_TIPC_PORTS=8191 CONFIG_ATM=m CONFIG_ATM_CLIP=m # CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_L2TP=m CONFIG_L2TP_DEBUGFS=m CONFIG_L2TP_V3=y CONFIG_L2TP_IP=m CONFIG_L2TP_ETH=m CONFIG_STP=m CONFIG_GARP=m CONFIG_BRIDGE=m CONFIG_BRIDGE_IGMP_SNOOPING=y # CONFIG_BRIDGE_VLAN_FILTERING is not set CONFIG_HAVE_NET_DSA=y CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y # CONFIG_VLAN_8021Q_MVRP is not set CONFIG_DECNET=m # CONFIG_DECNET_ROUTER is not set CONFIG_LLC=m CONFIG_LLC2=m CONFIG_IPX=m # CONFIG_IPX_INTERN is not set CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y # CONFIG_X25 is not set CONFIG_LAPB=m CONFIG_PHONET=m CONFIG_IEEE802154=m CONFIG_IEEE802154_6LOWPAN=m CONFIG_MAC802154=m CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_MULTIQ=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFB=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_DRR=m CONFIG_NET_SCH_MQPRIO=m CONFIG_NET_SCH_CHOKE=m CONFIG_NET_SCH_QFQ=m CONFIG_NET_SCH_CODEL=m CONFIG_NET_SCH_FQ_CODEL=m CONFIG_NET_SCH_INGRESS=m # CONFIG_NET_SCH_PLUG is not set # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_FLOW=m CONFIG_NET_CLS_CGROUP=y CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=m CONFIG_NET_EMATCH_NBYTE=m CONFIG_NET_EMATCH_U32=m CONFIG_NET_EMATCH_META=m CONFIG_NET_EMATCH_TEXT=m # CONFIG_NET_EMATCH_IPSET is not set CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=m CONFIG_NET_ACT_GACT=m CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=m CONFIG_NET_ACT_IPT=m CONFIG_NET_ACT_NAT=m CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_ACT_CSUM=m CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y CONFIG_DCB=y CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m # CONFIG_BATMAN_ADV_BLA is not set # CONFIG_BATMAN_ADV_DAT is not set # CONFIG_BATMAN_ADV_NC is not set # CONFIG_BATMAN_ADV_DEBUG is not set CONFIG_OPENVSWITCH=m # CONFIG_VSOCKETS is not set # CONFIG_NETLINK_MMAP is not set # CONFIG_NETLINK_DIAG is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y CONFIG_NETPRIO_CGROUP=m CONFIG_BQL=y # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set CONFIG_AF_RXRPC=m # CONFIG_AF_RXRPC_DEBUG is not set CONFIG_RXKAD=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_WEXT_CORE=y CONFIG_WEXT_PROC=y CONFIG_CFG80211=m # CONFIG_NL80211_TESTMODE is not set # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_DEBUGFS is not set # CONFIG_CFG80211_INTERNAL_REGDB is not set CONFIG_CFG80211_WEXT=y # CONFIG_LIB80211 is not set CONFIG_MAC80211=m CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_MINSTREL_HT=y CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_MESSAGE_TRACING is not set # CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_WIMAX is not set CONFIG_RFKILL=m CONFIG_RFKILL_LEDS=y CONFIG_RFKILL_INPUT=y # CONFIG_RFKILL_REGULATOR is not set CONFIG_NET_9P=m # CONFIG_NET_9P_DEBUG is not set # CONFIG_CAIF is not set CONFIG_CEPH_LIB=m # CONFIG_CEPH_LIB_PRETTYDEBUG is not set # CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set # CONFIG_NFC is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y # CONFIG_DEVTMPFS_MOUNT is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" # CONFIG_FW_LOADER_USER_HELPER is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_DMA_SHARED_BUFFER=y # CONFIG_CMA is not set # # Bus devices # CONFIG_CONNECTOR=m # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y # CONFIG_PNP_DEBUG_MESSAGES is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_DRBD=m # CONFIG_DRBD_FAULT_INJECTION is not set CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_NVME is not set # CONFIG_BLK_DEV_OSD is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_RBD=m # CONFIG_BLK_DEV_RSXX is not set # # Misc devices # # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_AD525X_DPOT is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_INTEL_MID_PTI is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ATMEL_SSC is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_APDS9802ALS is not set # CONFIG_ISL29003 is not set # CONFIG_ISL29020 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_SENSORS_BH1780 is not set # CONFIG_SENSORS_BH1770 is not set # CONFIG_SENSORS_APDS990X is not set # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_BMP085_I2C is not set # CONFIG_BMP085_SPI is not set # CONFIG_PCH_PHUB is not set # CONFIG_USB_SWITCH_FSA9480 is not set # CONFIG_LATTICE_ECP3_CONFIG is not set # CONFIG_SRAM is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_EEPROM_93XX46 is not set # CONFIG_CB710_CORE is not set # # Texas Instruments shared transport line discipline # # CONFIG_TI_ST is not set # CONFIG_SENSORS_LIS3_I2C is not set # # Altera FPGA firmware download module # # CONFIG_ALTERA_STAPL is not set # CONFIG_INTEL_MEI is not set # CONFIG_INTEL_MEI_ME is not set # CONFIG_VMWARE_VMCI is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=m CONFIG_RAID_ATTRS=m CONFIG_SCSI=m CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_FC_TGT_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_ISCSI_BOOT_SYSFS=m # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_CXGB4_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_SCSI_BNX2X_FCOE is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_MVUMI is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_MPT3SAS is not set # CONFIG_SCSI_UFSHCD is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_VMWARE_PVSCSI is not set CONFIG_LIBFC=m # CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_FCOE_FNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_ISCI is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_CHELSIO_FCOE is not set CONFIG_SCSI_LOWLEVEL_PCMCIA=y # CONFIG_PCMCIA_AHA152X is not set # CONFIG_PCMCIA_FDOMAIN is not set # CONFIG_PCMCIA_NINJA_SCSI is not set # CONFIG_PCMCIA_QLOGIC is not set # CONFIG_PCMCIA_SYM53C500 is not set CONFIG_SCSI_DH=m CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m CONFIG_SCSI_OSD_INITIATOR=m CONFIG_SCSI_OSD_ULD=m CONFIG_SCSI_OSD_DPRINT_SENSE=1 # CONFIG_SCSI_OSD_DEBUG is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y # CONFIG_SATA_ZPODD is not set CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # # CONFIG_SATA_AHCI is not set # CONFIG_SATA_AHCI_PLATFORM is not set # CONFIG_SATA_INIC162X is not set # CONFIG_SATA_ACARD_AHCI is not set # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_SX4 is not set CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=m # CONFIG_SATA_HIGHBANK is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_SVW is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # # PATA SFF controllers with BMDMA # # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARASAN_CF is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_ATP867X is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5535 is not set # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_SC1200 is not set CONFIG_PATA_SCH=m # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # # PIO-only SFF controllers # # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # # CONFIG_PATA_ACPI is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_LEGACY is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m # CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set CONFIG_DM_BUFIO=m CONFIG_DM_BIO_PRISON=m CONFIG_DM_PERSISTENT_DATA=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m # CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set # CONFIG_DM_CACHE is not set CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_QL=m CONFIG_DM_MULTIPATH_ST=m CONFIG_DM_DELAY=m CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m CONFIG_DM_VERITY=m CONFIG_TARGET_CORE=m CONFIG_TCM_IBLOCK=m CONFIG_TCM_FILEIO=m CONFIG_TCM_PSCSI=m CONFIG_LOOPBACK_TARGET=m CONFIG_TCM_FC=m CONFIG_ISCSI_TARGET=m # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_FIREWIRE_NOSY is not set CONFIG_I2O=m CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y CONFIG_I2O_EXT_ADAPTEC=y CONFIG_I2O_CONFIG=m CONFIG_I2O_CONFIG_OLD_IOCTL=y CONFIG_I2O_BUS=m CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_NET_CORE=y CONFIG_BONDING=m CONFIG_DUMMY=m CONFIG_EQUALIZER=m # CONFIG_NET_FC is not set CONFIG_MII=m CONFIG_IFB=m CONFIG_NET_TEAM=m CONFIG_NET_TEAM_MODE_BROADCAST=m CONFIG_NET_TEAM_MODE_ROUNDROBIN=m # CONFIG_NET_TEAM_MODE_RANDOM is not set CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m CONFIG_NET_TEAM_MODE_LOADBALANCE=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m # CONFIG_VXLAN is not set CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y CONFIG_TUN=m CONFIG_VETH=m # CONFIG_ARCNET is not set # CONFIG_ATM_DRIVERS is not set # # CAIF transport drivers # # # Distributed Switch Architecture drivers # # CONFIG_NET_DSA_MV88E6XXX is not set # CONFIG_NET_DSA_MV88E6060 is not set # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set # CONFIG_NET_DSA_MV88E6131 is not set # CONFIG_NET_DSA_MV88E6123_61_65 is not set CONFIG_ETHERNET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set # CONFIG_NET_VENDOR_ALTEON is not set # CONFIG_NET_VENDOR_AMD is not set CONFIG_NET_VENDOR_ATHEROS=y # CONFIG_ATL2 is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set CONFIG_ATL1C=m # CONFIG_ALX is not set # CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_BROCADE is not set # CONFIG_NET_CALXEDA_XGMAC is not set # CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_CISCO is not set # CONFIG_DNET is not set # CONFIG_NET_VENDOR_DEC is not set # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set # CONFIG_NET_VENDOR_EXAR is not set # CONFIG_NET_VENDOR_FUJITSU is not set # CONFIG_NET_VENDOR_HP is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_IP1000 is not set # CONFIG_JME is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MELLANOX is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_MICROCHIP is not set # CONFIG_NET_VENDOR_MYRI is not set # CONFIG_FEALNX is not set # CONFIG_NET_VENDOR_NATSEMI is not set # CONFIG_NET_VENDOR_NVIDIA is not set # CONFIG_NET_VENDOR_OKI is not set # CONFIG_ETHOC is not set # CONFIG_NET_PACKET_ENGINE is not set # CONFIG_NET_VENDOR_QLOGIC is not set # CONFIG_NET_VENDOR_REALTEK is not set # CONFIG_NET_VENDOR_RDC is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SILAN is not set # CONFIG_NET_VENDOR_SIS is not set # CONFIG_SFC is not set # CONFIG_NET_VENDOR_SMSC is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_SUN is not set # CONFIG_NET_VENDOR_TEHUTI is not set # CONFIG_NET_VENDOR_TI is not set # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_NET_VENDOR_XIRCOM is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_NET_SB1000 is not set CONFIG_PHYLIB=m # # MII PHY device drivers # CONFIG_AT803X_PHY=m # CONFIG_AMD_PHY is not set # CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_BCM87XX_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_MICREL_PHY is not set CONFIG_MDIO_BITBANG=m # CONFIG_MDIO_GPIO is not set # CONFIG_MICREL_KS8995MA is not set CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPP_MULTILINK=y CONFIG_PPPOATM=m CONFIG_PPPOE=m CONFIG_PPTP=m CONFIG_PPPOL2TP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m # CONFIG_SLIP is not set CONFIG_SLHC=m # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_RTL8152 is not set CONFIG_USB_USBNET=m # CONFIG_USB_NET_AX8817X is not set # CONFIG_USB_NET_AX88179_178A is not set CONFIG_USB_NET_CDCETHER=m # CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_CDC_NCM is not set # CONFIG_USB_NET_CDC_MBIM is not set # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SMSC75XX is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_PLUSB is not set # CONFIG_USB_NET_MCS7830 is not set CONFIG_USB_NET_RNDIS_HOST=m # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set # CONFIG_USB_NET_CX82310_ETH is not set # CONFIG_USB_NET_KALMIA is not set # CONFIG_USB_NET_QMI_WWAN is not set # CONFIG_USB_HSO is not set # CONFIG_USB_NET_INT51X1 is not set # CONFIG_USB_CDC_PHONET is not set CONFIG_USB_IPHETH=m # CONFIG_USB_SIERRA_NET is not set # CONFIG_USB_VL600 is not set CONFIG_WLAN=y # CONFIG_PCMCIA_RAYCS is not set # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AIRO is not set # CONFIG_ATMEL is not set # CONFIG_AT76C50X_USB is not set # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8180 is not set # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set # CONFIG_MWL8K is not set CONFIG_ATH_COMMON=m CONFIG_ATH_CARDS=m # CONFIG_ATH_DEBUG is not set # CONFIG_ATH5K is not set # CONFIG_ATH5K_PCI is not set CONFIG_ATH9K_HW=m CONFIG_ATH9K_COMMON=m # CONFIG_ATH9K_BTCOEX_SUPPORT is not set CONFIG_ATH9K=m CONFIG_ATH9K_PCI=y # CONFIG_ATH9K_AHB is not set # CONFIG_ATH9K_DEBUGFS is not set # CONFIG_ATH9K_LEGACY_RATE_CONTROL is not set # CONFIG_ATH9K_HTC is not set # CONFIG_CARL9170 is not set # CONFIG_ATH6KL is not set # CONFIG_AR5523 is not set # CONFIG_WIL6210 is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_BRCMFMAC is not set # CONFIG_HOSTAP is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_IWLWIFI is not set # CONFIG_IWL4965 is not set # CONFIG_IWL3945 is not set # CONFIG_LIBERTAS is not set # CONFIG_HERMES is not set # CONFIG_P54_COMMON is not set # CONFIG_RT2X00 is not set # CONFIG_RTLWIFI is not set # CONFIG_WL_TI is not set # CONFIG_ZD1211RW is not set # CONFIG_MWIFIEX is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set CONFIG_IEEE802154_DRIVERS=m CONFIG_IEEE802154_FAKEHARD=m CONFIG_IEEE802154_FAKELB=m # CONFIG_IEEE802154_AT86RF230 is not set # CONFIG_IEEE802154_MRF24J40 is not set # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=m CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_SPARSEKMAP=m CONFIG_INPUT_MATRIXKMAP=m # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1366 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ADP5588=m # CONFIG_KEYBOARD_ADP5589 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set CONFIG_KEYBOARD_QT2160=m CONFIG_KEYBOARD_LKKBD=m # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_GPIO_POLLED is not set # CONFIG_KEYBOARD_TCA6416 is not set CONFIG_KEYBOARD_TCA8418=m # CONFIG_KEYBOARD_MATRIX is not set CONFIG_KEYBOARD_LM8323=m CONFIG_KEYBOARD_LM8333=m CONFIG_KEYBOARD_MAX7359=m # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_MPR121 is not set CONFIG_KEYBOARD_NEWTON=m CONFIG_KEYBOARD_OPENCORES=m CONFIG_KEYBOARD_STOWAWAY=m CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_XTKBD=m CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_CYPRESS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_PS2_SENTELIC=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_CYAPA is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set CONFIG_MOUSE_SYNAPTICS_I2C=m CONFIG_MOUSE_SYNAPTICS_USB=m # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m CONFIG_TOUCHSCREEN_AD7877=m CONFIG_TOUCHSCREEN_AD7879=m CONFIG_TOUCHSCREEN_AD7879_I2C=m # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_ATMEL_MXT is not set # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set # CONFIG_TOUCHSCREEN_BU21013 is not set # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set # CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set CONFIG_TOUCHSCREEN_DYNAPRO=m CONFIG_TOUCHSCREEN_HAMPSHIRE=m CONFIG_TOUCHSCREEN_EETI=m CONFIG_TOUCHSCREEN_FUJITSU=m # CONFIG_TOUCHSCREEN_ILI210X is not set CONFIG_TOUCHSCREEN_GUNZE=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_WACOM_W8001=m # CONFIG_TOUCHSCREEN_WACOM_I2C is not set # CONFIG_TOUCHSCREEN_MAX11801 is not set CONFIG_TOUCHSCREEN_MCS5000=m # CONFIG_TOUCHSCREEN_MMS114 is not set CONFIG_TOUCHSCREEN_MTOUCH=m CONFIG_TOUCHSCREEN_INEXIO=m CONFIG_TOUCHSCREEN_MK712=m CONFIG_TOUCHSCREEN_PENMOUNT=m # CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set CONFIG_TOUCHSCREEN_TOUCHRIGHT=m CONFIG_TOUCHSCREEN_TOUCHWIN=m # CONFIG_TOUCHSCREEN_PIXCIR is not set CONFIG_TOUCHSCREEN_USB_COMPOSITE=m CONFIG_TOUCHSCREEN_USB_EGALAX=y CONFIG_TOUCHSCREEN_USB_PANJIT=y CONFIG_TOUCHSCREEN_USB_3M=y CONFIG_TOUCHSCREEN_USB_ITM=y CONFIG_TOUCHSCREEN_USB_ETURBO=y CONFIG_TOUCHSCREEN_USB_GUNZE=y CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y CONFIG_TOUCHSCREEN_USB_IRTOUCH=y CONFIG_TOUCHSCREEN_USB_IDEALTEK=y CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y CONFIG_TOUCHSCREEN_USB_GOTOP=y CONFIG_TOUCHSCREEN_USB_JASTEC=y CONFIG_TOUCHSCREEN_USB_ELO=y CONFIG_TOUCHSCREEN_USB_E2I=y CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y CONFIG_TOUCHSCREEN_USB_NEXIO=y CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y CONFIG_TOUCHSCREEN_TOUCHIT213=m # CONFIG_TOUCHSCREEN_TSC_SERIO is not set # CONFIG_TOUCHSCREEN_TSC2005 is not set CONFIG_TOUCHSCREEN_TSC2007=m # CONFIG_TOUCHSCREEN_ST1232 is not set CONFIG_TOUCHSCREEN_TPS6507X=m CONFIG_INPUT_MISC=y # CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_BMA150 is not set CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_MMA8450 is not set # CONFIG_INPUT_MPU3050 is not set # CONFIG_INPUT_APANEL is not set # CONFIG_INPUT_GP2A is not set CONFIG_INPUT_GPIO_TILT_POLLED=m # CONFIG_INPUT_WISTRON_BTNS is not set # CONFIG_INPUT_ATLAS_BTNS is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_KXTJ9 is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m # CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # CONFIG_INPUT_ADXL34X is not set # CONFIG_INPUT_IMS_PCU is not set # CONFIG_INPUT_CMA3000 is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=m # CONFIG_SERIO_CT82C710 is not set CONFIG_SERIO_PCIPS2=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_SERIO_PS2MULT is not set # CONFIG_SERIO_ARC_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_TTY=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y # CONFIG_LEGACY_PTYS is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set CONFIG_N_GSM=m # CONFIG_TRACE_SINK is not set # CONFIG_DEVKMEM is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_8250_DW is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_MAX310X is not set # CONFIG_SERIAL_MFD_HSU is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_IFX6X60 is not set CONFIG_SERIAL_PCH_UART=m # CONFIG_SERIAL_ARC is not set # CONFIG_SERIAL_RP2 is not set CONFIG_IPMI_HANDLER=m # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=m CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_GEODE is not set # CONFIG_HW_RANDOM_VIA is not set CONFIG_HW_RANDOM_TPM=m CONFIG_NVRAM=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_IPWIRELESS is not set # CONFIG_MWAVE is not set CONFIG_PC8736x_GPIO=m CONFIG_NSC_GPIO=m CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=m CONFIG_TCG_TPM=m CONFIG_TCG_TIS=m CONFIG_TCG_TIS_I2C_INFINEON=m CONFIG_TCG_NSC=m CONFIG_TCG_ATMEL=m CONFIG_TCG_INFINEON=m # CONFIG_TCG_ST33_I2C is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m # CONFIG_I2C_MUX is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set CONFIG_I2C_I801=m CONFIG_I2C_ISCH=m # CONFIG_I2C_ISMT is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # # ACPI drivers # CONFIG_I2C_SCMI=m # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CBUS_GPIO is not set # CONFIG_I2C_DESIGNWARE_PCI is not set CONFIG_I2C_EG20T=m # CONFIG_I2C_GPIO is not set # CONFIG_I2C_INTEL_MID is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PXA_PCI is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # CONFIG_I2C_DIOLAN_U2C=m CONFIG_I2C_PARPORT_LIGHT=m CONFIG_I2C_TAOS_EVM=m CONFIG_I2C_TINY_USB=m # # Other I2C/SMBus bus drivers # # CONFIG_SCx200_ACB is not set CONFIG_I2C_STUB=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set CONFIG_SPI=y CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # # CONFIG_SPI_ALTERA is not set CONFIG_SPI_BITBANG=m # CONFIG_SPI_GPIO is not set # CONFIG_SPI_OC_TINY is not set # CONFIG_SPI_PXA2XX is not set # CONFIG_SPI_PXA2XX_PCI is not set # CONFIG_SPI_SC18IS602 is not set CONFIG_SPI_TOPCLIFF_PCH=m # CONFIG_SPI_XCOMM is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set CONFIG_SPI_TLE62X0=m # # Qualcomm MSM SSBI bus support # # CONFIG_SSBI is not set # CONFIG_HSI is not set # # PPS support # # CONFIG_PPS is not set # # PPS generators support # # # PTP clock support # # CONFIG_PTP_1588_CLOCK is not set # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # # CONFIG_PTP_1588_CLOCK_PCH is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIO_DEVRES=y CONFIG_GPIOLIB=y CONFIG_GPIO_ACPI=y # CONFIG_GPIO_SYSFS is not set # # Memory mapped GPIO drivers: # # CONFIG_GPIO_GENERIC_PLATFORM is not set # CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_TS5500 is not set CONFIG_GPIO_SCH=m # CONFIG_GPIO_ICH is not set # CONFIG_GPIO_VX855 is not set # CONFIG_GPIO_LYNXPOINT is not set # # I2C GPIO expanders: # # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_AMD8111 is not set # CONFIG_GPIO_LANGWELL is not set CONFIG_GPIO_PCH=m # CONFIG_GPIO_ML_IOH is not set # CONFIG_GPIO_RDC321X is not set # # SPI GPIO expanders: # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_74X164 is not set # # AC97 GPIO expanders: # # # MODULbus GPIO expanders: # # # USB GPIO expanders: # # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_DS2780 is not set # CONFIG_BATTERY_DS2781 is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_SBS is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_BATTERY_MAX17042 is not set # CONFIG_CHARGER_MAX8903 is not set # CONFIG_CHARGER_LP8727 is not set CONFIG_CHARGER_GPIO=m # CONFIG_CHARGER_MANAGER is not set # CONFIG_CHARGER_BQ2415X is not set # CONFIG_CHARGER_SMB347 is not set # CONFIG_BATTERY_GOLDFISH is not set # CONFIG_POWER_RESET is not set # CONFIG_POWER_AVS is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7314 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7310 is not set # CONFIG_SENSORS_ADT7410 is not set # CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_K8TEMP is not set # CONFIG_SENSORS_K10TEMP is not set # CONFIG_SENSORS_FAM15H_POWER is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS620 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set CONFIG_SENSORS_GPIO_FAN=m # CONFIG_SENSORS_HIH6130 is not set CONFIG_SENSORS_CORETEMP=m # CONFIG_SENSORS_IBMAEM is not set # CONFIG_SENSORS_IBMPEX is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_JC42 is not set # CONFIG_SENSORS_LINEAGE is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LTC4151 is not set # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LTC4261 is not set # CONFIG_SENSORS_LM95234 is not set # CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_LM95245 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX16065 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX1668 is not set # CONFIG_SENSORS_MAX197 is not set # CONFIG_SENSORS_MAX6639 is not set # CONFIG_SENSORS_MAX6642 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_MAX6697 is not set # CONFIG_SENSORS_MCP3021 is not set # CONFIG_SENSORS_NCT6775 is not set # CONFIG_SENSORS_NTC_THERMISTOR is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_PMBUS is not set # CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SHT21 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMM665 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_EMC1403 is not set # CONFIG_SENSORS_EMC2103 is not set # CONFIG_SENSORS_EMC6W201 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SCH56XX_COMMON is not set # CONFIG_SENSORS_SCH5627 is not set # CONFIG_SENSORS_SCH5636 is not set # CONFIG_SENSORS_ADS1015 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_ADS7871 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_INA209 is not set # CONFIG_SENSORS_INA2XX is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP102 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA_CPUTEMP is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83795 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_APPLESMC is not set # # ACPI drivers # CONFIG_SENSORS_ACPI_POWER=m # CONFIG_SENSORS_ATK0110 is not set CONFIG_THERMAL=m CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_USER_SPACE=y # CONFIG_CPU_THERMAL is not set # CONFIG_THERMAL_EMULATION is not set # CONFIG_INTEL_POWERCLAMP is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set # CONFIG_ALIM1535_WDT is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_F71808E_WDT is not set # CONFIG_SP5100_TCO is not set # CONFIG_SC520_WDT is not set # CONFIG_SBC_FITPC2_WATCHDOG is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set # CONFIG_IBMASR is not set # CONFIG_WAFER_WDT is not set CONFIG_I6300ESB_WDT=m CONFIG_IE6XX_WDT=m CONFIG_ITCO_WDT=m CONFIG_ITCO_VENDOR_SUPPORT=y # CONFIG_IT8712F_WDT is not set # CONFIG_IT87_WDT is not set # CONFIG_HP_WATCHDOG is not set # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set # CONFIG_NV_TCO is not set # CONFIG_60XX_WDT is not set # CONFIG_SBC8360_WDT is not set # CONFIG_SBC7240_WDT is not set # CONFIG_CPU5_WDT is not set # CONFIG_SMSC_SCH311X_WDT is not set # CONFIG_SMSC37B787_WDT is not set # CONFIG_VIA_WDT is not set # CONFIG_W83627HF_WDT is not set # CONFIG_W83697HF_WDT is not set # CONFIG_W83697UG_WDT is not set # CONFIG_W83877F_WDT is not set # CONFIG_W83977F_WDT is not set # CONFIG_MACHZ_WDT is not set # CONFIG_SBC_EPX_C3_WATCHDOG is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # # Broadcom specific AMBA # # CONFIG_BCMA is not set # # Multifunction device drivers # CONFIG_MFD_CORE=m # CONFIG_MFD_CS5535 is not set # CONFIG_MFD_CROS_EC is not set # CONFIG_MFD_DA9052_SPI is not set # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_HTC_PASIC3 is not set CONFIG_LPC_ICH=m CONFIG_LPC_SCH=m # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_EZX_PCAP is not set # CONFIG_MFD_VIPERBOARD is not set # CONFIG_MFD_RETU is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_RTSX_PCI is not set # CONFIG_MFD_SI476X_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_SYSCON is not set # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_TPS6105X is not set # CONFIG_TPS65010 is not set # CONFIG_TPS6507X is not set # CONFIG_MFD_TPS65217 is not set # CONFIG_MFD_TPS65912 is not set # CONFIG_MFD_TPS65912_SPI is not set # CONFIG_MFD_WL1273_CORE is not set # CONFIG_MFD_LM3533 is not set # CONFIG_MFD_TIMBERDALE is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_VX855 is not set # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_ARIZONA_SPI is not set # CONFIG_MFD_WM831X_SPI is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_DUMMY is not set CONFIG_REGULATOR_FIXED_VOLTAGE=m # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set CONFIG_REGULATOR_USERSPACE_CONSUMER=m CONFIG_REGULATOR_GPIO=m # CONFIG_REGULATOR_AD5398 is not set # CONFIG_REGULATOR_FAN53555 is not set # CONFIG_REGULATOR_ISL6271A is not set # CONFIG_REGULATOR_MAX1586 is not set # CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set # CONFIG_REGULATOR_MAX8952 is not set # CONFIG_REGULATOR_MAX8973 is not set # CONFIG_REGULATOR_LP3971 is not set # CONFIG_REGULATOR_LP3972 is not set # CONFIG_REGULATOR_LP8755 is not set # CONFIG_REGULATOR_TPS51632 is not set # CONFIG_REGULATOR_TPS62360 is not set # CONFIG_REGULATOR_TPS65023 is not set # CONFIG_REGULATOR_TPS6507X is not set # CONFIG_REGULATOR_TPS6524X is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set # CONFIG_AGP_EFFICEON is not set CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_VGA_SWITCHEROO=y CONFIG_DRM=m CONFIG_DRM_KMS_HELPER=m # CONFIG_DRM_LOAD_EDID_FIRMWARE is not set CONFIG_DRM_TTM=m # # I2C encoder or helper chips # # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set # CONFIG_DRM_I2C_NXP_TDA998X is not set # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_NOUVEAU is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_I915 is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # CONFIG_DRM_VMWGFX is not set CONFIG_DRM_GMA500=m # CONFIG_DRM_GMA600 is not set # CONFIG_DRM_GMA3600 is not set # CONFIG_DRM_UDL is not set # CONFIG_DRM_AST is not set # CONFIG_DRM_MGAG200 is not set # CONFIG_DRM_CIRRUS_QEMU is not set # CONFIG_DRM_QXL is not set CONFIG_VGASTATE=m CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_HDMI=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_VGA16=m CONFIG_FB_UVESA=m CONFIG_FB_VESA=y # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I740 is not set # CONFIG_FB_I810 is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_TMIO is not set # CONFIG_FB_SMSCUFX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_GOLDFISH is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_FB_AUO_K190X is not set # CONFIG_EXYNOS_VIDEO is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_L4F00242T03 is not set # CONFIG_LCD_LMS283GF05 is not set # CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI922X is not set # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_TDO24M is not set # CONFIG_LCD_VGG2432A4 is not set CONFIG_LCD_PLATFORM=m # CONFIG_LCD_S6E63M0 is not set # CONFIG_LCD_LD9040 is not set # CONFIG_LCD_AMS369FG06 is not set # CONFIG_LCD_LMS501KF03 is not set # CONFIG_LCD_HX8357 is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=m # CONFIG_BACKLIGHT_APPLE is not set # CONFIG_BACKLIGHT_SAHARA is not set # CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # CONFIG_BACKLIGHT_LM3630 is not set # CONFIG_BACKLIGHT_LM3639 is not set # CONFIG_BACKLIGHT_LP855X is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y # CONFIG_SOUND_OSS_CORE_PRECLAIM is not set CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_JACK=y CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_HRTIMER=m CONFIG_SND_SEQ_HRTIMER_DEFAULT=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_KCTL_JACK=y CONFIG_SND_DMA_SGBUF=y CONFIG_SND_RAWMIDI_SEQ=m # CONFIG_SND_OPL3_LIB_SEQ is not set # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_MPU401_UART=m CONFIG_SND_DRIVERS=y CONFIG_SND_PCSP=m CONFIG_SND_DUMMY=m CONFIG_SND_ALOOP=m CONFIG_SND_VIRMIDI=m # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set CONFIG_SND_MPU401=m CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ASIHPI is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_INDIGOIOX is not set # CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_PREALLOC_SIZE=64 CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_INPUT_BEEP_MODE=1 CONFIG_SND_HDA_INPUT_JACK=y CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_HDMI=y CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CA0132=y # CONFIG_SND_HDA_CODEC_CA0132_DSP is not set CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_LOLA is not set # CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SIS7019 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_SPI is not set # CONFIG_SND_USB is not set # CONFIG_SND_PCMCIA is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set # # HID support # CONFIG_HID=m CONFIG_HIDRAW=y # CONFIG_UHID is not set CONFIG_HID_GENERIC=m # # Special HID drivers # CONFIG_HID_A4TECH=m # CONFIG_HID_ACRUX is not set CONFIG_HID_APPLE=m # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set CONFIG_HID_BELKIN=m CONFIG_HID_CHERRY=m CONFIG_HID_CHICONY=m # CONFIG_HID_PRODIKEYS is not set CONFIG_HID_CYPRESS=m # CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EMS_FF is not set # CONFIG_HID_ELECOM is not set CONFIG_HID_EZKEY=m # CONFIG_HID_HOLTEK is not set # CONFIG_HID_KEYTOUCH is not set # CONFIG_HID_KYE is not set # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_ICADE is not set # CONFIG_HID_TWINHAN is not set CONFIG_HID_KENSINGTON=m # CONFIG_HID_LCPOWER is not set # CONFIG_HID_LENOVO_TPKBD is not set CONFIG_HID_LOGITECH=m # CONFIG_HID_LOGITECH_DJ is not set # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set # CONFIG_LOGIWHEELS_FF is not set # CONFIG_HID_MAGICMOUSE is not set CONFIG_HID_MICROSOFT=m CONFIG_HID_MONTEREY=m # CONFIG_HID_MULTITOUCH is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_PICOLCD is not set # CONFIG_HID_PRIMAX is not set # CONFIG_HID_PS3REMOTE is not set # CONFIG_HID_ROCCAT is not set # CONFIG_HID_SAITEK is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SPEEDLINK is not set # CONFIG_HID_STEELSERIES is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TIVO is not set # CONFIG_HID_TOPSEED is not set # CONFIG_HID_THINGM is not set # CONFIG_HID_THRUSTMASTER is not set # CONFIG_HID_WACOM is not set # CONFIG_HID_WIIMOTE is not set # CONFIG_HID_ZEROPLUS is not set # CONFIG_HID_ZYDACRON is not set # CONFIG_HID_SENSOR_HUB is not set # # USB HID support # CONFIG_USB_HID=m # CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set # # I2C HID support # # CONFIG_I2C_HID is not set CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB_ARCH_HAS_XHCI=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=m CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y CONFIG_USB_DYNAMIC_MINORS=y # CONFIG_USB_OTG is not set CONFIG_USB_MON=m CONFIG_USB_WUSB_CBAF=m # CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=m # CONFIG_USB_XHCI_HCD_DEBUGGING is not set CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_PCI=m # CONFIG_USB_EHCI_HCD_PLATFORM is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_PLATFORM is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set CONFIG_USB_TMC=m # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set # CONFIG_USB_STORAGE_DATAFAB is not set CONFIG_USB_STORAGE_FREECOM=m CONFIG_USB_STORAGE_ISD200=m CONFIG_USB_STORAGE_USBAT=m CONFIG_USB_STORAGE_SDDR09=m CONFIG_USB_STORAGE_SDDR55=m # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set CONFIG_USB_STORAGE_ONETOUCH=m CONFIG_USB_STORAGE_KARMA=m # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_DWC3 is not set # CONFIG_USB_CHIPIDEA is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set CONFIG_USB_SEVSEG=m CONFIG_USB_RIO500=m # CONFIG_USB_LEGOTOWER is not set CONFIG_USB_LCD=m CONFIG_USB_LED=m # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set CONFIG_USB_LD=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set CONFIG_USB_TEST=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set CONFIG_USB_EZUSB_FX2=m # CONFIG_USB_HSIC_USB3503 is not set CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m CONFIG_USB_CXACRU=m CONFIG_USB_UEAGLEATM=m CONFIG_USB_XUSBATM=m # CONFIG_USB_PHY is not set # CONFIG_USB_GADGET is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # # CONFIG_LEDS_LM3530 is not set # CONFIG_LEDS_LM3642 is not set # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=m # CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_LP5523 is not set # CONFIG_LEDS_LP5562 is not set # CONFIG_LEDS_CLEVO_MAIL is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_PCA9633 is not set # CONFIG_LEDS_DAC124S085 is not set CONFIG_LEDS_REGULATOR=m # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_INTEL_SS4200 is not set # CONFIG_LEDS_LT3593 is not set # CONFIG_LEDS_DELL_NETBOOKS is not set # CONFIG_LEDS_TCA6507 is not set # CONFIG_LEDS_LM355x is not set # CONFIG_LEDS_OT200 is not set # CONFIG_LEDS_BLINKM is not set # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m # CONFIG_LEDS_TRIGGER_CPU is not set # CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # # iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=y # CONFIG_LEDS_TRIGGER_CAMERA is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y CONFIG_EDAC_LEGACY_SYSFS=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=m # CONFIG_EDAC_AMD76X is not set # CONFIG_EDAC_E7XXX is not set # CONFIG_EDAC_E752X is not set # CONFIG_EDAC_I82875P is not set # CONFIG_EDAC_I82975X is not set # CONFIG_EDAC_I3000 is not set # CONFIG_EDAC_I3200 is not set # CONFIG_EDAC_X38 is not set # CONFIG_EDAC_I5400 is not set # CONFIG_EDAC_I7CORE is not set # CONFIG_EDAC_I82860 is not set # CONFIG_EDAC_R82600 is not set # CONFIG_EDAC_I5000 is not set # CONFIG_EDAC_I5100 is not set # CONFIG_EDAC_I7300 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_SYSTOHC=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8523 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # CONFIG_RTC_DRV_EM3027 is not set # CONFIG_RTC_DRV_RV3029C2 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T93 is not set # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set # CONFIG_RTC_DRV_PCF2123 is not set # CONFIG_RTC_DRV_RX4581 is not set # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # CONFIG_RTC_DRV_DS2404 is not set # # on-CPU RTC drivers # # # HID Sensor RTC drivers # # CONFIG_RTC_DRV_HID_SENSOR_TIME is not set CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # # CONFIG_INTEL_MID_DMAC is not set # CONFIG_INTEL_IOATDMA is not set # CONFIG_DW_DMAC is not set # CONFIG_TIMB_DMA is not set CONFIG_PCH_DMA=m CONFIG_DMA_ENGINE=y CONFIG_DMA_ACPI=y # # DMA Clients # CONFIG_NET_DMA=y CONFIG_ASYNC_TX_DMA=y # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set CONFIG_UIO=m # CONFIG_UIO_CIF is not set CONFIG_UIO_PDRV=m CONFIG_UIO_PDRV_GENIRQ=m # CONFIG_UIO_DMEM_GENIRQ is not set # CONFIG_UIO_AEC is not set # CONFIG_UIO_SERCOS3 is not set CONFIG_UIO_PCI_GENERIC=m # CONFIG_UIO_NETX is not set # CONFIG_VIRT_DRIVERS is not set # # Virtio drivers # # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_MMIO is not set # # Microsoft Hyper-V guest support # # CONFIG_STAGING is not set CONFIG_X86_PLATFORM_DEVICES=y # CONFIG_ACER_WMI is not set # CONFIG_ACERHDF is not set CONFIG_ASUS_LAPTOP=m # CONFIG_CHROMEOS_LAPTOP is not set # CONFIG_DELL_WMI is not set # CONFIG_DELL_WMI_AIO is not set # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_FUJITSU_TABLET is not set # CONFIG_AMILO_RFKILL is not set # CONFIG_TC1100_WMI is not set # CONFIG_HP_ACCEL is not set # CONFIG_HP_WMI is not set # CONFIG_MSI_LAPTOP is not set # CONFIG_PANASONIC_LAPTOP is not set # CONFIG_COMPAL_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_IDEAPAD_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_INTEL_MENLOW is not set CONFIG_EEEPC_LAPTOP=m CONFIG_ASUS_WMI=m CONFIG_ASUS_NB_WMI=m CONFIG_EEEPC_WMI=m CONFIG_ACPI_WMI=m CONFIG_MSI_WMI=m # CONFIG_TOPSTAR_LAPTOP is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_TOSHIBA_BT_RFKILL is not set CONFIG_ACPI_CMPC=m CONFIG_INTEL_IPS=m # CONFIG_IBM_RTL is not set # CONFIG_XO15_EBOOK is not set # CONFIG_SAMSUNG_LAPTOP is not set # CONFIG_MXM_WMI is not set CONFIG_INTEL_OAKTRAIL=m # CONFIG_SAMSUNG_Q10 is not set # CONFIG_APPLE_GMUX is not set # CONFIG_PVPANIC is not set # # Hardware Spinlock drivers # CONFIG_CLKSRC_I8253=y CONFIG_CLKEVT_I8253=y CONFIG_I8253_LOCK=y CONFIG_CLKBLD_I8253=y # CONFIG_MAILBOX is not set CONFIG_IOMMU_SUPPORT=y # CONFIG_INTEL_IOMMU is not set # # Remoteproc drivers # # CONFIG_STE_MODEM_RPROC is not set # # Rpmsg drivers # # CONFIG_PM_DEVFREQ is not set # CONFIG_EXTCON is not set # CONFIG_MEMORY is not set # CONFIG_IIO is not set # CONFIG_VME_BUS is not set # CONFIG_PWM is not set # CONFIG_IPACK_BUS is not set # CONFIG_RESET_CONTROLLER is not set # # Firmware Drivers # CONFIG_EDD=m # CONFIG_EDD_OFF is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # CONFIG_DMI_SYSFS is not set CONFIG_ISCSI_IBFT_FIND=y CONFIG_ISCSI_IBFT=m # CONFIG_GOOGLE_FIRMWARE is not set # # File systems # CONFIG_DCACHE_WORD_ACCESS=y CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=m CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y # CONFIG_EXT4_DEBUG is not set CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=m # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y CONFIG_PRINT_QUOTA_WARNING=y # CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y # # Caches # CONFIG_FSCACHE=m CONFIG_FSCACHE_STATS=y # CONFIG_FSCACHE_HISTOGRAM is not set # CONFIG_FSCACHE_DEBUG is not set # CONFIG_FSCACHE_OBJECT_LIST is not set CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_HISTOGRAM is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="utf8" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=m CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_LOGFS is not set CONFIG_CRAMFS=m CONFIG_SQUASHFS=m CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX6FS_FS is not set CONFIG_ROMFS_FS=m CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y CONFIG_PSTORE=y # CONFIG_PSTORE_CONSOLE is not set # CONFIG_PSTORE_RAM is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set # CONFIG_EXOFS_FS is not set # CONFIG_F2FS_FS is not set CONFIG_ORE=m CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V2=m CONFIG_NFS_V3=m CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=m # CONFIG_NFS_SWAP is not set CONFIG_NFS_V4_1=y CONFIG_PNFS_FILE_LAYOUT=m CONFIG_PNFS_BLOCK=m CONFIG_PNFS_OBJLAYOUT=m CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" CONFIG_NFS_FSCACHE=y # CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y CONFIG_NFS_DEBUG=y CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_BACKCHANNEL=y CONFIG_RPCSEC_GSS_KRB5=m CONFIG_SUNRPC_DEBUG=y CONFIG_CEPH_FS=m CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y CONFIG_CIFS_ACL=y # CONFIG_CIFS_DEBUG is not set CONFIG_CIFS_DFS_UPCALL=y # CONFIG_CIFS_SMB2 is not set CONFIG_CIFS_FSCACHE=y # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m CONFIG_AFS_FS=m # CONFIG_AFS_DEBUG is not set CONFIG_AFS_FSCACHE=y CONFIG_9P_FS=m CONFIG_9P_FSCACHE=y CONFIG_9P_FS_POSIX_ACL=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m # CONFIG_NLS_MAC_ROMAN is not set # CONFIG_NLS_MAC_CELTIC is not set # CONFIG_NLS_MAC_CENTEURO is not set # CONFIG_NLS_MAC_CROATIAN is not set # CONFIG_NLS_MAC_CYRILLIC is not set # CONFIG_NLS_MAC_GAELIC is not set # CONFIG_NLS_MAC_GREEK is not set # CONFIG_NLS_MAC_ICELAND is not set # CONFIG_NLS_MAC_INUIT is not set # CONFIG_NLS_MAC_ROMANIAN is not set # CONFIG_NLS_MAC_TURKISH is not set CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_DLM_DEBUG=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y CONFIG_STRIP_ASM_SYMS=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 CONFIG_HAVE_DEBUG_KMEMLEAK=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_ARCH_WANT_FRAME_POINTERS=y # CONFIG_FRAME_POINTER is not set # # RCU Debugging # # CONFIG_SPARSE_RCU_POINTER is not set CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_LKDTM is not set CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_KMEMCHECK=y # CONFIG_TEST_STRING_HELPERS is not set # CONFIG_TEST_KSTRTOX is not set CONFIG_STRICT_DEVMEM=y CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set CONFIG_DEBUG_SET_MODULE_RONX=y CONFIG_DOUBLEFAULT=y # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_OPTIMIZE_INLINING=y # # Security options # CONFIG_KEYS=y # CONFIG_TRUSTED_KEYS is not set # CONFIG_ENCRYPTED_KEYS is not set # CONFIG_KEYS_DEBUG_PROC_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set CONFIG_SECURITYFS=y CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m CONFIG_ASYNC_PQ=m CONFIG_ASYNC_RAID6_RECOV=m CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_USER is not set # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_PCRYPT=m CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_ABLK_HELPER_X86=m CONFIG_CRYPTO_GLUE_HELPER_X86=m # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_SEQIV=m # # Block modes # CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m # # Hash modes # # CONFIG_CRYPTO_CMAC is not set CONFIG_CRYPTO_HMAC=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m # # Digest # CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CRC32C_INTEL=m CONFIG_CRYPTO_CRC32=m # CONFIG_CRYPTO_CRC32_PCLMUL is not set CONFIG_CRYPTO_GHASH=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m # # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_586=m CONFIG_CRYPTO_AES_NI_INTEL=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_BLOWFISH_COMMON=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST_COMMON=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SALSA20_586=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SERPENT_SSE2_586=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_TWOFISH_586=m # # Compression # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=y # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_USER_API=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=m CONFIG_CRYPTO_DEV_PADLOCK_AES=m CONFIG_CRYPTO_DEV_PADLOCK_SHA=m CONFIG_CRYPTO_DEV_GEODE=m # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_ASYMMETRIC_KEY_TYPE is not set CONFIG_HAVE_KVM=y # CONFIG_VIRTUALIZATION is not set # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_RAID6_PQ=m CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IO=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set CONFIG_CRC7=m CONFIG_LIBCRC32C=m CONFIG_CRC8=m CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_XZ_DEC=y CONFIG_XZ_DEC_X86=y CONFIG_XZ_DEC_POWERPC=y CONFIG_XZ_DEC_IA64=y CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_SPARC=y CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_XZ=y CONFIG_DECOMPRESS_LZO=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_NLATTR=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y CONFIG_LRU_CACHE=m CONFIG_AVERAGE=y CONFIG_CORDIC=m # CONFIG_DDR is not set CONFIG_OID_REGISTRY=m ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-09-09 21:58 ` 3.10.5: rcu_sched detected stalls on CPUs/tasks Jochen Striepe @ 2013-09-09 22:27 ` Paul E. McKenney 2013-09-10 7:45 ` Jochen Striepe 2013-09-14 11:28 ` Jochen Striepe 0 siblings, 2 replies; 17+ messages in thread From: Paul E. McKenney @ 2013-09-09 22:27 UTC (permalink / raw) To: Jochen Striepe; +Cc: linux-kernel, stable On Mon, Sep 09, 2013 at 11:58:36PM +0200, Jochen Striepe wrote: > Hi again, > > On Sun, Aug 18, 2013 at 08:48:49PM +0200, Jochen Striepe wrote: > > Unfortunately, I was not able to reproduce that behaviour since. > > I just got this on 3.10.11 on the same machine. Could that be > related? > > Just curious, > Jochen. Several people helped track down another source of spurious stall warnings on large systems, please see below for the patch. Thanx, Paul ------------------------------------------------------------------------ rcu: Reject memory-order-induced stall-warning false positives If a system is idle from an RCU perspective for longer than specified by CONFIG_RCU_CPU_STALL_TIMEOUT, and if one CPU starts a grace period just as a second checks for CPU stalls, and if this second CPU happens to see the old value of rsp->jiffies_stall, it will incorrectly report a CPU stall. This is quite rare, but apparently occurs deterministically on systems with about 6TB of memory. This commit therefore orders accesses to the data used to determine whether or not a CPU stall is in progress. Grace-period initialization and cleanup first increments rsp->completed to mark the end of the previous grace period, then records the current jiffies in rsp->gp_start, then records the jiffies at which a stall can be expected to occur in rsp->jiffies_stall, and finally increments rsp->gpnum to mark the start of the new grace period. Now, this ordering by itself does not prevent false positives. For example, if grace-period initialization was delayed between recording rsp->gp_start and rsp->jiffies_stall, the CPU stall warning code might still see an old value of rsp->jiffies_stall. Therefore, this commit also orders the CPU stall warning accesses as well, loading rsp->gpnum and jiffies, then rsp->jiffies_stall, then rsp->gp_start, and finally rsp->completed. This ordering means that the false-positive scenario in the previous paragraph would result in rsp->completed being greater than or equal to rsp->gpnum, which is never valid for a CPU stall, allowing the false positive to be rejected. Furthermore, any fetch that gets an old value of rsp->jiffies_stall must also get an old value of rsp->gpnum, which will again be rejected by the comparison of rsp->gpnum and rsp->completed. Situations where rsp->gp_start is later than rsp->jiffies_stall are also rejected, as are situations where jiffies is less than rsp->jiffies_stall. Although use of unsynchronized accesses means that there are likely still some false-positive scenarios (synchronization has proven to be a very bad idea on large systems), this should get rid of a large class of these scenarios. Reported-by: Fabian Herschel <fabian.herschel@suse.com> Reported-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 5f0bddf..a06d172 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -797,8 +797,11 @@ static int rcu_implicit_dynticks_qs(struct rcu_data *rdp, static void record_gp_stall_check_time(struct rcu_state *rsp) { - rsp->gp_start = jiffies; - rsp->jiffies_stall = jiffies + rcu_jiffies_till_stall_check(); + unsigned long j = ACCESS_ONCE(jiffies); + + rsp->gp_start = j; + smp_wmb(); /* Record start time before stall time. */ + rsp->jiffies_stall = j + rcu_jiffies_till_stall_check(); } /* @@ -927,17 +930,48 @@ static void print_cpu_stall(struct rcu_state *rsp) static void check_cpu_stall(struct rcu_state *rsp, struct rcu_data *rdp) { + unsigned long completed; + unsigned long gpnum; + unsigned long gps; unsigned long j; unsigned long js; struct rcu_node *rnp; - if (rcu_cpu_stall_suppress) + if (rcu_cpu_stall_suppress || !rcu_gp_in_progress(rsp)) return; j = ACCESS_ONCE(jiffies); + + /* + * Lots of memory barriers to reject false positives. + * + * The idea is to pick up rsp->gpnum, then rsp->jiffies_stall, + * then rsp->gp_start, and finally rsp->completed. These values + * are updated in the opposite order with memory barriers (or + * equivalent) during grace-period initialization and cleanup. + * Now, a false positive can occur if we get an new value of + * rsp->gp_start and a old value of rsp->jiffies_stall. But given + * the memory barriers, the only way that this can happen is if one + * grace period ends and another starts between these two fetches. + * Detect this by comparing rsp->completed with the previous fetch + * from rsp->gpnum. + * + * Given this check, comparisons of jiffies, rsp->jiffies_stall, + * and rsp->gp_start suffice to forestall false positives. + */ + gpnum = ACCESS_ONCE(rsp->gpnum); + smp_rmb(); /* Pick up ->gpnum first... */ js = ACCESS_ONCE(rsp->jiffies_stall); + smp_rmb(); /* ...then ->jiffies_stall before the rest... */ + gps = ACCESS_ONCE(rsp->gp_start); + smp_rmb(); /* ...and finally ->gp_start before ->completed. */ + completed = ACCESS_ONCE(rsp->completed); + if (ULONG_CMP_GE(completed, gpnum) || + ULONG_CMP_LT(j, js) || + ULONG_CMP_GE(gps, js)) + return; /* No stall or GP completed since entering function. */ rnp = rdp->mynode; if (rcu_gp_in_progress(rsp) && - (ACCESS_ONCE(rnp->qsmask) & rdp->grpmask) && ULONG_CMP_GE(j, js)) { + (ACCESS_ONCE(rnp->qsmask) & rdp->grpmask)) { /* We haven't checked in, so go dump stack. */ print_cpu_stall(rsp); @@ -1318,9 +1352,10 @@ static int rcu_gp_init(struct rcu_state *rsp) } /* Advance to a new grace period and initialize state. */ + record_gp_stall_check_time(rsp); + smp_wmb(); /* Record GP times before starting GP. */ rsp->gpnum++; trace_rcu_grace_period(rsp->name, rsp->gpnum, TPS("start")); - record_gp_stall_check_time(rsp); raw_spin_unlock_irq(&rnp->lock); /* Exclude any concurrent CPU-hotplug operations. */ ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-09-09 22:27 ` Paul E. McKenney @ 2013-09-10 7:45 ` Jochen Striepe 2013-09-10 17:54 ` Paul E. McKenney 2013-09-14 11:28 ` Jochen Striepe 1 sibling, 1 reply; 17+ messages in thread From: Jochen Striepe @ 2013-09-10 7:45 UTC (permalink / raw) To: Paul E. McKenney; +Cc: linux-kernel, stable Hello, On Mon, Sep 09, 2013 at 03:27:51PM -0700, Paul E. McKenney wrote: > On Mon, Sep 09, 2013 at 11:58:36PM +0200, Jochen Striepe wrote: > > I just got this on 3.10.11 on the same machine. Could that be > > related? > > Several people helped track down another source of spurious stall > warnings on large systems, please see below for the patch. [...] > This is quite rare, but apparently occurs deterministically > on systems with about 6TB of memory. Hmm. My system is an ASUS Eee PC netbook with a total of 2G memory. The latest stall was just when booting, while /dev was to be filled by udev (and taking a really long time on that). So I think this patch should not help at my machine, right? I tried to reproduce the stall, but without success. Is there anything that could help reproducing? Best greetings, Jochen. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-09-10 7:45 ` Jochen Striepe @ 2013-09-10 17:54 ` Paul E. McKenney 2013-09-11 10:34 ` Jochen Striepe 0 siblings, 1 reply; 17+ messages in thread From: Paul E. McKenney @ 2013-09-10 17:54 UTC (permalink / raw) To: Jochen Striepe; +Cc: linux-kernel, stable On Tue, Sep 10, 2013 at 09:45:50AM +0200, Jochen Striepe wrote: > Hello, > > On Mon, Sep 09, 2013 at 03:27:51PM -0700, Paul E. McKenney wrote: > > On Mon, Sep 09, 2013 at 11:58:36PM +0200, Jochen Striepe wrote: > > > I just got this on 3.10.11 on the same machine. Could that be > > > related? > > > > Several people helped track down another source of spurious stall > > warnings on large systems, please see below for the patch. > [...] > > This is quite rare, but apparently occurs deterministically > > on systems with about 6TB of memory. > > Hmm. My system is an ASUS Eee PC netbook with a total of 2G memory. > The latest stall was just when booting, while /dev was to be filled > by udev (and taking a really long time on that). So I think this > patch should not help at my machine, right? > > I tried to reproduce the stall, but without success. Is there anything > that could help reproducing? Their stall was due to old-style creation of sysfs entries for memory. Yours might be having a similar issue with the creation of /dev entries, so it would be worth trying it. One thing to try would be to insert delays into the code involved in creating the /dev entries. These delays will need to be busy-waits rather than sleeps. Thanx, Paul ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-09-10 17:54 ` Paul E. McKenney @ 2013-09-11 10:34 ` Jochen Striepe 0 siblings, 0 replies; 17+ messages in thread From: Jochen Striepe @ 2013-09-11 10:34 UTC (permalink / raw) To: Paul E. McKenney; +Cc: linux-kernel, stable Hello, On Tue, Sep 10, 2013 at 10:54:53AM -0700, Paul E. McKenney wrote: > Their stall was due to old-style creation of sysfs entries for memory. > Yours might be having a similar issue with the creation of /dev entries, > so it would be worth trying it. OK, compiling 3.10.11 with your patch right now. > One thing to try would be to insert delays into the code involved in > creating the /dev entries. These delays will need to be busy-waits > rather than sleeps. Uh, I will have a look. But I'm no kernel developer. :) Best greetings, Jochen. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-09-09 22:27 ` Paul E. McKenney 2013-09-10 7:45 ` Jochen Striepe @ 2013-09-14 11:28 ` Jochen Striepe 2013-09-14 18:36 ` Paul E. McKenney 2013-09-23 16:49 ` Jochen Striepe 1 sibling, 2 replies; 17+ messages in thread From: Jochen Striepe @ 2013-09-14 11:28 UTC (permalink / raw) To: Paul E. McKenney; +Cc: linux-kernel, stable Hello again, On Mon, Sep 09, 2013 at 03:27:51PM -0700, Paul E. McKenney wrote: > Several people helped track down another source of spurious stall > warnings on large systems, please see below for the patch. [...] > ------------------------------------------------------------------------ > > rcu: Reject memory-order-induced stall-warning false positives I run this patch on top of 3.10.11 vanilla since Wednesday, so far without any further stalls, on light to heavy loads. Works smooth as pie. Tested-by: Jochen Striepe <jochen@tolot.escape.de> Have a nice weekend and a big thank you, Jochen. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-09-14 11:28 ` Jochen Striepe @ 2013-09-14 18:36 ` Paul E. McKenney 2013-09-23 16:49 ` Jochen Striepe 1 sibling, 0 replies; 17+ messages in thread From: Paul E. McKenney @ 2013-09-14 18:36 UTC (permalink / raw) To: Jochen Striepe; +Cc: linux-kernel, stable On Sat, Sep 14, 2013 at 01:28:34PM +0200, Jochen Striepe wrote: > Hello again, > > On Mon, Sep 09, 2013 at 03:27:51PM -0700, Paul E. McKenney wrote: > > Several people helped track down another source of spurious stall > > warnings on large systems, please see below for the patch. > [...] > > ------------------------------------------------------------------------ > > > > rcu: Reject memory-order-induced stall-warning false positives > > I run this patch on top of 3.10.11 vanilla since Wednesday, so far > without any further stalls, on light to heavy loads. Works smooth > as pie. > > Tested-by: Jochen Striepe <jochen@tolot.escape.de> Very good! I have added your Tested-by. > Have a nice weekend and a big thank you, And thank you for your testing efforts! Thanx, Paul ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-09-14 11:28 ` Jochen Striepe 2013-09-14 18:36 ` Paul E. McKenney @ 2013-09-23 16:49 ` Jochen Striepe 2013-12-06 0:26 ` Paul E. McKenney 1 sibling, 1 reply; 17+ messages in thread From: Jochen Striepe @ 2013-09-23 16:49 UTC (permalink / raw) To: Paul E. McKenney; +Cc: linux-kernel, stable [-- Attachment #1: Type: text/plain, Size: 827 bytes --] Hello again, On Sat, Sep 14, 2013 at 01:28:34PM +0200, Jochen Striepe wrote: > On Mon, Sep 09, 2013 at 03:27:51PM -0700, Paul E. McKenney wrote: > > rcu: Reject memory-order-induced stall-warning false positives > > I run this patch on top of 3.10.11 vanilla since Wednesday, so far > without any further stalls, on light to heavy loads. Works smooth > as pie. Hmm, perhaps it is not as easy as I thought. On exactly this machine with exactly this kernel (3.10.11 vanilla with your patch from this thread), some minutes ago another one came up. The system should have been mostly idle at that moment. Dmesg appended ... do you need anything else to have an educated guess? I waited 10 minutes after the stall message (following your earlier advise), but no further dmesg lines appeared after that. Best greetings, Jochen. [-- Attachment #2: bar --] [-- Type: text/plain, Size: 41278 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.11pm1 (root@sodom) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Wed Sep 11 13:05:02 CEST 2013 [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f64ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f650000-0x000000007f65ffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f660000-0x000000007f66dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f66e000-0x000000007f6affff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f6b0000-0x000000007f6bffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f6c8000-0x000000007f7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: ASUSTeK Computer INC. 1201HA/1201HA, BIOS 0210 11/25/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7f650 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 080000000 write-back [ 0.000000] 1 base 07F700000 mask 0FFF00000 uncachable [ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780] [ 0.000000] initial memory mapped: [mem 0x00000000-0x017fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff] [ 0.000000] [mem 0x37000000-0x373fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff] [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff] [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] BRK [0x0153e000, 0x0153efff] PGTABLE [ 0.000000] RAMDISK: [mem 0x37526000-0x37a8afff] [ 0.000000] Allocated new RAMDISK: [mem 0x36fc1000-0x3752564e] [ 0.000000] Move RAMDISK from [mem 0x37526000-0x37a8a64e] to [mem 0x36fc1000-0x3752564e] [ 0.000000] ACPI: RSDP 000fbfd0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 7f660100 00064 (v01 _ASUS_ Notebook 20091125 MSFT 00000097) [ 0.000000] ACPI: FACP 7f660290 000F4 (v04 112509 FACP1046 20091125 MSFT 00000097) [ 0.000000] ACPI: DSDT 7f660430 095E0 (v02 A1451 A1451000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 7f66e000 00040 [ 0.000000] ACPI: APIC 7f660390 0005C (v02 112509 APIC1046 20091125 MSFT 00000097) [ 0.000000] ACPI: MCFG 7f6603f0 0003C (v01 112509 OEMMCFG 20091125 MSFT 00000097) [ 0.000000] ACPI: OEMB 7f66e040 0012C (v01 112509 OEMB1046 20091125 MSFT 00000097) [ 0.000000] ACPI: HPET 7f669a10 00038 (v01 112509 OEMHPET 20091125 MSFT 00000097) [ 0.000000] ACPI: GSCI 7f66e170 02024 (v01 112509 GMCHSCI 20091125 MSFT 00000097) [ 0.000000] ACPI: SSDT 7f670b60 004F0 (v01 PmRef CpuPm 00003000 INTL 20060113) [ 0.000000] ACPI: SLIC 7f669a50 00176 (v01 _ASUS_ Notebook 20091125 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x0153f000, 0x0153ffff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0x7f64ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x7f64ffff] [ 0.000000] On node 0 totalpages: 521710 [ 0.000000] free_area_init_node: node 0, pgdat c147f000, node_mem_map f5fd1020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 294482 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 [ 0.000000] e820: [mem 0x7f800000-0xfedfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f77da000 s27456 r0 d21696 u49152 [ 0.000000] pcpu-alloc: s27456 r0 d21696 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519934 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.11pm1 root=/dev/mapper/sodom-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f650) [ 0.000000] Memory: 2058604k/2087232k available (3401k kernel code, 28236k reserved, 1232k data, 368k init, 1177928k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff8e000 - 0xfffff000 ( 452 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1487000 - 0xc14e3000 ( 368 kB) [ 0.000000] .data : 0xc135254f - 0xc1486580 (1232 kB) [ 0.000000] .text : 0xc1000000 - 0xc135254f (3401 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1331.273 MHz processor [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2662.54 BogoMIPS (lpj=5325092) [ 0.004014] pid_max: default: 32768 minimum: 301 [ 0.008062] Mount-cache hash table entries: 512 [ 0.008499] Initializing cgroup subsys devices [ 0.008509] Initializing cgroup subsys freezer [ 0.008515] Initializing cgroup subsys net_cls [ 0.008521] Initializing cgroup subsys blkio [ 0.008526] Initializing cgroup subsys perf_event [ 0.008583] Disabled fast string operations [ 0.008593] CPU: Physical Processor ID: 0 [ 0.008597] CPU: Processor Core ID: 0 [ 0.008602] mce: CPU supports 5 MCE banks [ 0.008618] CPU0: Thermal monitoring enabled (TM2) [ 0.008648] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0 [ 0.008648] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8 [ 0.008648] tlb_flushall_shift: 6 [ 0.008759] Freeing SMP alternatives: 16k freed [ 0.008789] ACPI: Core revision 20130328 [ 0.021274] ACPI: All ACPI Tables successfully acquired [ 0.024197] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.024579] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.066744] smpboot: CPU0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz (fam: 06, model: 1c, stepping: 02) [ 0.068000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver. [ 0.068000] ... version: 3 [ 0.068000] ... bit width: 40 [ 0.068000] ... generic registers: 2 [ 0.068000] ... value mask: 000000ffffffffff [ 0.068000] ... max period: 000000007fffffff [ 0.068000] ... fixed-purpose events: 3 [ 0.068000] ... event mask: 0000000700000003 [ 0.068000] CPU 1 irqstacks, hard=f58e8000 soft=f58ea000 [ 0.068000] smpboot: Booting Node 0, Processors #1 OK [ 0.008000] Initializing CPU#1 [ 0.008000] Disabled fast string operations [ 0.076117] Brought up 2 CPUs [ 0.076134] smpboot: Total of 2 processors activated (5325.09 BogoMIPS) [ 0.076667] devtmpfs: initialized [ 0.076667] PM: Registering ACPI NVS region [mem 0x7f66e000-0x7f6affff] (270336 bytes) [ 0.076667] regulator-dummy: no parameters [ 0.076667] NET: Registered protocol family 16 [ 0.076867] ACPI: bus type PCI registered [ 0.076874] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.077033] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.077042] PCI: not using MMCONFIG [ 0.077325] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.077329] PCI: Using configuration type 1 for base access [ 0.080461] bio: create slab <bio-0> at 0 [ 0.080461] ACPI: Added _OSI(Module Device) [ 0.080461] ACPI: Added _OSI(Processor Device) [ 0.080461] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.080461] ACPI: Added _OSI(Processor Aggregator Device) [ 0.086388] ACPI: EC: Look up EC in DSDT [ 0.089974] ACPI: Executed 1 blocks of module-level executable AML code [ 0.100321] ACPI BIOS Bug: Warning: Incorrect checksum in table [OEMB] - 0xC1, should be 0x11 (20130328/tbutils-324) [ 0.101057] ACPI: SSDT 7f670270 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20060113) [ 0.101953] ACPI: Dynamic OEM Table Load: [ 0.101961] ACPI: SSDT (null) 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20060113) [ 0.104065] ACPI: SSDT 7f670500 0065D (v01 PmRef Cpu0Cst 00003001 INTL 20060113) [ 0.104904] ACPI: Dynamic OEM Table Load: [ 0.104911] ACPI: SSDT (null) 0065D (v01 PmRef Cpu0Cst 00003001 INTL 20060113) [ 0.105560] ACPI: SSDT 7f6701a0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20060113) [ 0.106430] ACPI: Dynamic OEM Table Load: [ 0.106438] ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20060113) [ 0.106664] ACPI: SSDT 7f670470 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113) [ 0.107504] ACPI: Dynamic OEM Table Load: [ 0.107511] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113) [ 0.108396] ACPI: Interpreter enabled [ 0.108431] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.108444] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.108489] ACPI: (supports S0 S3 S4 S5) [ 0.108495] ACPI: Using IOAPIC for interrupt routing [ 0.108575] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.112036] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.112043] PCI: Using MMCONFIG for extended config space [ 0.112091] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.112366] ACPI: No dock devices found. [ 0.130130] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.134505] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.135145] PCI host bridge to bus 0000:00 [ 0.135157] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.135166] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.135173] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.135180] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.135188] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.135195] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xdfffffff] [ 0.135202] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff] [ 0.135229] pci 0000:00:00.0: [8086:8100] type 00 class 0x060000 [ 0.135466] pci 0000:00:02.0: [8086:8108] type 00 class 0x030000 [ 0.135496] pci 0000:00:02.0: reg 10: [mem 0xf3f80000-0xf3ffffff] [ 0.135512] pci 0000:00:02.0: reg 14: [io 0xc880-0xc887] [ 0.135527] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff] [ 0.135543] pci 0000:00:02.0: reg 1c: [mem 0xf3f40000-0xf3f7ffff] [ 0.135820] pci 0000:00:1b.0: [8086:811b] type 00 class 0x040300 [ 0.135848] pci 0000:00:1b.0: reg 10: [mem 0xf3f38000-0xf3f3bfff 64bit] [ 0.135931] pci 0000:00:1b.0: PME# supported from D0 D3hot [ 0.136141] pci 0000:00:1c.0: [8086:8110] type 01 class 0x060400 [ 0.136229] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.136336] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.136437] pci 0000:00:1c.1: [8086:8112] type 01 class 0x060400 [ 0.136523] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.136628] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.136738] pci 0000:00:1d.0: [8086:8114] type 00 class 0x0c0300 [ 0.136788] pci 0000:00:1d.0: reg 20: [io 0xb880-0xb89f] [ 0.136951] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.137052] pci 0000:00:1d.1: [8086:8115] type 00 class 0x0c0300 [ 0.137103] pci 0000:00:1d.1: reg 20: [io 0xc080-0xc09f] [ 0.137263] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.137363] pci 0000:00:1d.2: [8086:8116] type 00 class 0x0c0300 [ 0.137414] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f] [ 0.137573] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.137692] pci 0000:00:1d.7: [8086:8117] type 00 class 0x0c0320 [ 0.137728] pci 0000:00:1d.7: reg 10: [mem 0xf3f37c00-0xf3f37fff] [ 0.137864] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.137976] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.138080] pci 0000:00:1f.0: [8086:8119] type 00 class 0x060100 [ 0.138315] pci 0000:00:1f.1: [8086:811a] type 00 class 0x010180 [ 0.138368] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.138675] pci 0000:03:00.0: [1969:1062] type 00 class 0x020000 [ 0.138711] pci 0000:03:00.0: reg 10: [mem 0xfbfc0000-0xfbffffff 64bit] [ 0.138732] pci 0000:03:00.0: reg 18: [io 0xe880-0xe8ff] [ 0.138861] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.148036] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.148047] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.148057] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.148198] pci 0000:01:00.0: [168c:002b] type 00 class 0x028000 [ 0.148233] pci 0000:01:00.0: reg 10: [mem 0xfbef0000-0xfbefffff 64bit] [ 0.148366] pci 0000:01:00.0: supports D1 [ 0.148373] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.156028] pci 0000:00:1c.1: PCI bridge to [bus 01-02] [ 0.156039] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.156049] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xfbefffff] [ 0.156059] pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff pref] [ 0.156078] pci_bus 0000:00: on NUMA node 0 [ 0.156089] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.156096] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.157451] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.157655] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.157855] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.158055] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.158262] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.158463] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.158663] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.158862] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.159336] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.159357] acpi root: \_SB_.PCI0 notify handler is installed [ 0.159483] Found 1 acpi root devices [ 0.159663] ACPI: EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62 [ 0.160053] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.160064] vgaarb: loaded [ 0.160069] vgaarb: bridge control possible 0000:00:02.0 [ 0.160091] PCI: Using ACPI for IRQ routing [ 0.160152] PCI: pci_cache_line_size set to 64 bytes [ 0.160218] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.160225] e820: reserve RAM buffer [mem 0x7f650000-0x7fffffff] [ 0.160567] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.160577] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.160589] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.164053] Switching to clocksource hpet [ 0.164191] pnp: PnP ACPI init [ 0.164222] ACPI: bus type PNP registered [ 0.164606] system 00:00: [mem 0x7f800000-0x7fffffff] has been reserved [ 0.164619] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.164742] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.164903] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.164987] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.165081] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.165582] system 00:05: [io 0x0374-0x0375] has been reserved [ 0.165592] system 00:05: [io 0x03f4-0x03f5] has been reserved [ 0.165601] system 00:05: [io 0x0380-0x0387] has been reserved [ 0.165608] system 00:05: [io 0x09f4-0x09ff] has been reserved [ 0.165617] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.165624] system 00:05: [io 0x0900-0x09f3] has been reserved [ 0.165632] system 00:05: [io 0x0400-0x043f] has been reserved [ 0.165640] system 00:05: [io 0x0480-0x04bf] has been reserved [ 0.165649] system 00:05: [mem 0xf0000000-0xf0003fff] has been reserved [ 0.165658] system 00:05: [mem 0x00000384-0x00000387] could not be reserved [ 0.165667] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.165789] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.165998] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active) [ 0.166204] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.166543] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.166553] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.166563] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.166782] pnp 00:0a: Plug and Play ACPI device, IDs SYN0a13 SYN0a01 SYN0a04 SYN0002 PNP0f13 (active) [ 0.166961] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.166972] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.167594] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.167605] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.167613] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.167621] system 00:0c: [mem 0x00100000-0x7f7fffff] could not be reserved [ 0.167631] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.168194] pnp: PnP ACPI: found 13 devices [ 0.168200] ACPI: bus type PNP unregistered [ 0.209203] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff pref] to [bus 03] add_size 200000 [ 0.209228] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000 [ 0.209244] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff pref] [ 0.209252] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.209262] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.209273] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.209283] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff pref] [ 0.209296] pci 0000:00:1c.1: PCI bridge to [bus 01-02] [ 0.209304] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.209314] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xfbefffff] [ 0.209324] pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff pref] [ 0.209619] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.209629] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.209636] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.209643] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.209650] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xdfffffff] [ 0.209658] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff] [ 0.209666] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.209673] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.209680] pci_bus 0000:03: resource 2 [mem 0x80000000-0x801fffff pref] [ 0.209688] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.209695] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xfbefffff] [ 0.209702] pci_bus 0000:01: resource 2 [mem 0xcc000000-0xcfffffff pref] [ 0.209834] NET: Registered protocol family 2 [ 0.210284] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.210358] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.210429] TCP: Hash tables configured (established 8192 bind 8192) [ 0.210538] TCP: reno registered [ 0.210546] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.210567] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.210753] NET: Registered protocol family 1 [ 0.210802] pci 0000:00:02.0: Boot video device [ 0.211811] PCI: CLS 32 bytes, default 64 [ 0.211944] Unpacking initramfs... [ 0.512610] Freeing initrd memory: 5524k freed [ 0.521954] audit: initializing netlink socket (disabled) [ 0.521991] type=2000 audit(1379952906.520:1): initialized [ 0.522609] bounce pool size: 64 pages [ 0.522645] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.523275] VFS: Disk quotas dquot_6.5.2 [ 0.523347] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.523583] msgmni has been set to 1730 [ 0.524361] alg: No test for stdrng (krng) [ 0.524445] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.524453] io scheduler noop registered [ 0.524458] io scheduler deadline registered [ 0.524491] io scheduler cfq registered (default) [ 0.524832] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.524888] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.525061] intel_idle: MWAIT substates: 0x3020220 [ 0.525078] intel_idle: v0.4 model 0x1C [ 0.525083] intel_idle: lapic_timer_reliable_states 0x2 [ 0.525089] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2 [ 0.525180] GHES: HEST is not enabled! [ 0.525325] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.526592] Linux agpgart interface v0.103 [ 0.526789] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.551083] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.551104] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.551481] mousedev: PS/2 mouse device common for all mice [ 0.552889] rtc_cmos 00:01: RTC can wake from S4 [ 0.553118] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.553162] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.553330] cpuidle: using governor ladder [ 0.553498] cpuidle: using governor menu [ 0.553721] TCP: cubic registered [ 0.553808] NET: Registered protocol family 10 [ 0.554292] mip6: Mobile IPv6 [ 0.554300] NET: Registered protocol family 17 [ 0.554343] Key type dns_resolver registered [ 0.554733] Using IPI No-Shortcut mode [ 0.555058] registered taskstats version 1 [ 0.555914] rtc_cmos 00:01: setting system clock to 2013-09-23 16:15:06 UTC (1379952906) [ 0.556194] Freeing unused kernel memory: 368k freed [ 0.576991] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.699928] udevd[56]: starting version 175 [ 0.806771] ACPI: bus type USB registered [ 0.806905] usbcore: registered new interface driver usbfs [ 0.806966] usbcore: registered new interface driver hub [ 0.815016] usbcore: registered new device driver usb [ 0.816467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.817417] uhci_hcd: USB Universal Host Controller Interface driver [ 0.817716] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.817732] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.817764] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.817874] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b880 [ 0.818048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.818061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.818071] usb usb1: Product: UHCI Host Controller [ 0.818081] usb usb1: Manufacturer: Linux 3.10.11pm1 uhci_hcd [ 0.818090] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.819031] ehci-pci: EHCI PCI platform driver [ 0.820901] atl1c 0000:03:00.0: version 1.0.1.1-NAPI [ 0.834650] hub 1-0:1.0: USB hub found [ 0.834675] hub 1-0:1.0: 2 ports detected [ 0.851744] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 0.852139] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.852169] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.852210] ehci-pci 0000:00:1d.7: debug port 1 [ 0.856204] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 0.866276] ehci-pci 0000:00:1d.7: irq 19, io mem 0xf3f37c00 [ 0.876082] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.876168] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.876180] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.876190] usb usb2: Product: EHCI Host Controller [ 0.876200] usb usb2: Manufacturer: Linux 3.10.11pm1 ehci_hcd [ 0.876209] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.876676] hub 2-0:1.0: USB hub found [ 0.876697] hub 2-0:1.0: 8 ports detected [ 0.899811] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.899826] ACPI: Thermal Zone [TZ00] (40 C) [ 0.900224] hub 1-0:1.0: USB hub found [ 0.900244] hub 1-0:1.0: 2 ports detected [ 0.901813] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.901830] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.901858] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.901981] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000c080 [ 0.902143] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.902155] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.902164] usb usb3: Product: UHCI Host Controller [ 0.902173] usb usb3: Manufacturer: Linux 3.10.11pm1 uhci_hcd [ 0.902181] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.902752] hub 3-0:1.0: USB hub found [ 0.902778] hub 3-0:1.0: 2 ports detected [ 0.903514] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.903535] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.903563] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.903682] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480 [ 0.903867] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.903881] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.903892] usb usb4: Product: UHCI Host Controller [ 0.903902] usb usb4: Manufacturer: Linux 3.10.11pm1 uhci_hcd [ 0.903911] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.904503] hub 4-0:1.0: USB hub found [ 0.904526] hub 4-0:1.0: 2 ports detected [ 0.914737] SCSI subsystem initialized [ 0.936542] ACPI: bus type ATA registered [ 0.937588] libata version 3.00 loaded. [ 0.938244] pata_sch 0000:00:1f.1: version 0.2 [ 0.938408] pata_sch 0000:00:1f.1: setting latency timer to 64 [ 0.939546] scsi0 : pata_sch [ 0.940608] scsi1 : pata_sch [ 0.940867] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.940880] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.150250] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133 [ 1.150266] ata1.00: 488397168 sectors, multi 16: LBA48 [ 1.165208] ata1.00: configured for UDMA/100 [ 1.165724] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5 [ 1.188311] usb 2-5: new high-speed USB device number 2 using ehci-pci [ 1.335231] usb 2-5: New USB device found, idVendor=13d3, idProduct=5111 [ 1.335248] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=2 [ 1.335259] usb 2-5: Product: USB2.0 UVC VGA WebCam [ 1.335269] usb 2-5: Manufacturer: Image Processor [ 1.335278] usb 2-5: SerialNumber: USB2.0 UVC VGA WebCam [ 1.348402] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.348717] sd 0:0:0:0: [sda] Write Protect is off [ 1.348732] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.348864] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.364441] sda: sda1 sda2 < sda5 > [ 1.365932] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.370600] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.719512] device-mapper: uevent: version 1.0.3 [ 1.719736] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 22.850525] bio: create slab <bio-1> at 1 [ 23.123895] bio: create slab <bio-1> at 1 [ 23.991776] PM: Starting manual resume from disk [ 24.046947] kjournald starting. Commit interval 5 seconds [ 24.047018] EXT3-fs (dm-1): mounted filesystem with ordered data mode [ 26.375409] udevd[400]: starting version 175 [ 27.478951] ACPI: Battery Slot [BAT0] (battery absent) [ 27.495197] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 27.590161] ACPI Warning: 0x00000400-0x0000043f SystemIO conflicts with Region \SMRG 1 (20130328/utaddress-251) [ 27.590185] ACPI Warning: 0x00000400-0x0000043f SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMRG 2 (20130328/utaddress-251) [ 27.590201] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.590222] lpc_sch: probe of 0000:00:1f.0 failed with error -16 [ 27.638465] microcode: CPU0 sig=0x106c2, pf=0x1, revision=0x211 [ 27.639576] ACPI: AC Adapter [AC0] (on-line) [ 27.640309] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 27.645628] ACPI: Lid Switch [LID] [ 27.645871] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 27.646054] ACPI: Sleep Button [SLPB] [ 27.646256] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 27.646399] ACPI: Power Button [PWRB] [ 27.665928] cfg80211: Calling CRDA to update world regulatory domain [ 27.669092] microcode: CPU1 sig=0x106c2, pf=0x1, revision=0x211 [ 27.669786] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 27.878347] wmi: Mapper loaded [ 27.895475] ACPI: Requesting acpi_cpufreq [ 28.014754] [drm] Initialized drm 1.1.0 20060810 [ 28.075868] gma500 0000:00:02.0: setting latency timer to 64 [ 27.947510] asus_wmi: ASUS WMI generic driver loaded [ 28.080311] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.5 [ 28.082289] asus_wmi: SFUN value: 0x0<6>[ 28.091896] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5 [ 28.116952] ath: phy0: ASPM enabled: 0x42 [ 28.116986] ath: EEPROM regdomain: 0x60 [ 28.116993] ath: EEPROM indicates we should expect a direct regpair map [ 28.117004] ath: Country alpha2 being used: 00 [ 28.117009] ath: Regpair used: 0x60 [ 28.124646] acpi device:0c: registered as cooling_device2 [ 28.124733] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 28.124920] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 28.127317] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 28.127331] [drm] No driver support for vblank timestamp query. [ 28.203103] asus_wmi: Backlight controlled by ACPI video driver [ 28.289781] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 28.290622] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf83c0000, irq=17 [ 29.230001] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 600854 [ 29.312093] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 29.529197] fbcon: psbdrmfb (fb0) is primary device [ 29.800819] Console: switching to colour frame buffer device 170x48 [ 29.815308] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device [ 29.815315] gma500 0000:00:02.0: registered panic notifier [ 29.815476] gma500 0000:00:02.0: Backlight lvds set brightness 7a127a12 [ 29.815501] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0 [ 29.843254] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 29.848157] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 29.848517] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 29.912158] gma500 0000:00:02.0: Backlight lvds set brightness 7a127a12 [ 31.952960] EXT3-fs (dm-1): using internal journal [ 33.149211] loop: module loaded [ 33.801621] Adding 4030460k swap on /dev/mapper/sodom-swap_1. Priority:-1 extents:1 across:4030460k FS [ 34.932831] kjournald starting. Commit interval 5 seconds [ 34.934073] EXT3-fs (dm-3): using internal journal [ 34.934087] EXT3-fs (dm-3): mounted filesystem with ordered data mode [ 37.506624] atl1c 0000:03:00.0: irq 40 for MSI/MSI-X [ 37.506783] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 37.815624] RPC: Registered named UNIX socket transport module. [ 37.815637] RPC: Registered udp transport module. [ 37.815644] RPC: Registered tcp transport module. [ 37.815650] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 37.853765] FS-Cache: Loaded [ 37.898674] FS-Cache: Netfs 'nfs' registered for caching [ 38.050597] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 608.014667] INFO: rcu_sched detected stalls on CPUs/tasks: { 1} (detected by 0, t=19848 jiffies, g=1717, c=1716, q=1) [ 608.014701] sending NMI to all CPUs: [ 528.633016] NMI backtrace for cpu 1 [ 528.633035] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.10.11pm1 #1 [ 528.633326] Hardware name: ASUSTeK Computer INC. 1201HA/1201HA, BIOS 0210 11/25/2009 [ 528.633669] task: f58d5100 ti: f58da000 task.ti: f58da000 [ 528.633907] EIP: 0060:[<c106b8b5>] EFLAGS: 00200246 CPU: 1 [ 528.633927] EIP is at cpu_startup_entry+0x105/0x160 [ 528.633939] EAX: 00000000 EBX: c14827ec ECX: 00000000 EDX: f58da000 [ 528.633951] ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: f58dbf8c [ 528.633963] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 528.633975] CR0: 8005003b CR2: b7604000 CR3: 014ea000 CR4: 000007d0 [ 528.633987] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 528.633997] DR6: ffff0ff0 DR7: 00000400 [ 528.634005] Stack: [ 528.634105] b0d11cf8 6dcc549c 26cf2573 c1347856 dfd7ffff ff7fffe3 00000000 00000000 [ 528.634132] 4248d9c1 26cf2573 01020800 00000000 00000000 00000000 00000000 00000000 [ 528.634158] 00000000 0000007b 0000007b 000000d8 000000e0 ffffffff 00000000 00000060 [ 528.634185] Call Trace: [ 528.634320] [<c1347856>] ? start_secondary+0x1e6/0x1ec [ 528.634330] Code: 74 84 e8 ef fb 02 00 fb 89 e0 25 00 e0 ff ff 8b 40 08 a8 08 75 19 89 e2 81 e2 00 e0 ff ff 90 8d b4 26 00 00 00 00 f3 90 8b 42 08 <a8> 08 74 f7 e8 32 fb 02 00 eb 96 e8 1b d9 f9 ff eb b6 e8 34 98 [ 608.018015] NMI backtrace for cpu 0 [ 608.018031] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.11pm1 #1 [ 608.018345] Hardware name: ASUSTeK Computer INC. 1201HA/1201HA, BIOS 0210 11/25/2009 [ 608.018561] task: c144e1a0 ti: f5806000 task.ti: c1442000 [ 608.018561] EIP: 0060:[<c1021b88>] EFLAGS: 00200006 CPU: 0 [ 608.018561] EIP is at arch_trigger_all_cpu_backtrace+0x48/0x70 [ 608.018561] EAX: 00000c00 EBX: 00002710 ECX: c1455ba0 EDX: fffff000 [ 608.018561] ESI: c145a300 EDI: 00000000 EBP: c145a300 ESP: f5807ea4 [ 608.018561] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 608.018561] CR0: 8005003b CR2: b7743000 CR3: 014ea000 CR4: 000007d0 [ 608.018561] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 608.018561] DR6: ffff0ff0 DR7: 00000400 [ 608.018561] Stack: [ 608.018561] c13da377 f77dcdc0 c109c7b8 c13e7ee4 00000000 00004d88 000006b5 000006b4 [ 608.018561] 00000001 00000001 00000001 00000001 c14827f0 f77dcdc0 c144e1a0 00000000 [ 608.018561] 00000000 c1443ebc c103ca66 f77dcc00 907f219e 0000008d c10749dc f77dca50 [ 608.018561] Call Trace: [ 608.018561] [<c109c7b8>] ? rcu_check_callbacks+0x548/0x570 [ 608.018561] [<c103ca66>] ? update_process_times+0x36/0x70 [ 608.018561] [<c10749dc>] ? tick_sched_timer+0x3c/0x80 [ 608.018561] [<c104f397>] ? __remove_hrtimer+0x47/0xa0 [ 608.018561] [<c104f481>] ? __run_hrtimer.isra.29+0x41/0xc0 [ 608.018561] [<c10500c5>] ? hrtimer_interrupt+0x205/0x290 [ 608.018561] [<c1073ab3>] ? tick_do_broadcast.constprop.8+0x63/0x70 [ 608.018561] [<c1073c48>] ? tick_handle_oneshot_broadcast+0x108/0x150 [ 608.018561] [<c122d9d3>] ? credit_entropy_bits.part.10+0xa3/0x140 [ 608.018561] [<c1003aea>] ? timer_interrupt+0xa/0x10 [ 608.018561] [<c10946be>] ? handle_irq_event_percpu+0x2e/0x140 [ 608.018561] [<c102227a>] ? io_apic_modify_irq.isra.13+0x4a/0x60 [ 608.018561] [<c10947fe>] ? handle_irq_event+0x2e/0x50 [ 608.018561] [<c10968e0>] ? handle_simple_irq+0x60/0x60 [ 608.018561] [<c109693a>] ? handle_edge_irq+0x5a/0xe0 [ 608.018561] <IRQ> [ 608.018561] [<c10032ae>] ? do_IRQ+0x3e/0xc0 [ 608.018561] [<c1351933>] ? common_interrupt+0x33/0x38 [ 608.018561] [<c10375c1>] ? __do_softirq+0x71/0x160 [ 608.018561] [<c107491a>] ? tick_do_update_jiffies64+0xda/0x130 [ 608.018561] [<c10377d5>] ? irq_exit+0x85/0x90 [ 608.018561] [<c10032b7>] ? do_IRQ+0x47/0xc0 [ 608.018561] [<c10513e4>] ? notifier_call_chain+0x44/0x60 [ 608.018561] [<c1351933>] ? common_interrupt+0x33/0x38 [ 608.018561] [<c106007b>] ? unregister_fair_sched_group+0xb/0xa0 [ 608.018561] [<c125ecd8>] ? cpuidle_enter_state+0x48/0xd0 [ 608.018561] [<c125ede1>] ? cpuidle_idle_call+0x81/0x110 [ 608.018561] [<c10091f5>] ? arch_cpu_idle+0x5/0x20 [ 608.018561] [<c106b839>] ? cpu_startup_entry+0x89/0x160 [ 608.018561] [<c1487a04>] ? start_kernel+0x332/0x338 [ 608.018561] [<c1487513>] ? repair_env_string+0x4d/0x4d [ 608.018561] Code: c1 8b 00 c7 04 24 77 a3 3d c1 a3 e0 26 48 c1 e8 a2 9e 32 00 8b 15 80 5b 45 c1 b8 02 00 00 00 ff 52 7c eb 16 8d b4 26 00 00 00 00 <b8> 58 89 41 00 e8 ae a6 16 00 83 eb 01 74 09 f6 05 e0 26 48 c1 ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-09-23 16:49 ` Jochen Striepe @ 2013-12-06 0:26 ` Paul E. McKenney 2013-12-06 13:58 ` Jochen Striepe 0 siblings, 1 reply; 17+ messages in thread From: Paul E. McKenney @ 2013-12-06 0:26 UTC (permalink / raw) To: Jochen Striepe; +Cc: linux-kernel, stable On Mon, Sep 23, 2013 at 06:49:31PM +0200, Jochen Striepe wrote: > Hello again, > > On Sat, Sep 14, 2013 at 01:28:34PM +0200, Jochen Striepe wrote: > > On Mon, Sep 09, 2013 at 03:27:51PM -0700, Paul E. McKenney wrote: > > > rcu: Reject memory-order-induced stall-warning false positives > > > > I run this patch on top of 3.10.11 vanilla since Wednesday, so far > > without any further stalls, on light to heavy loads. Works smooth > > as pie. > > Hmm, perhaps it is not as easy as I thought. On exactly this machine > with exactly this kernel (3.10.11 vanilla with your patch from this > thread), some minutes ago another one came up. The system should have > been mostly idle at that moment. Dmesg appended ... do you need > anything else to have an educated guess? I waited 10 minutes after > the stall message (following your earlier advise), but no further > dmesg lines appeared after that. Hmmm... Does the following patch help? Thanx, Paul ------------------------------------------------------------------------ rcu: Kick CPU halfway to RCU CPU stall warning When an RCU CPU stall warning occurs, the CPU invokes resched_cpu() on itself. This can help move the grace period forward in some situations, but it would be even better to do this -before- the RCU CPU stall warning. This commit therefore causes resched_cpu() to be called every five jiffies once the system is halfway to an RCU CPU stall warning. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c index dd081987a8ec..5243ebea0fc1 100644 --- a/kernel/rcu/tree.c +++ b/kernel/rcu/tree.c @@ -755,6 +755,12 @@ static int dyntick_save_progress_counter(struct rcu_data *rdp, } /* + * This function really isn't for public consumption, but RCU is special in + * that context switches can allow the state machine to make progress. + */ +extern void resched_cpu(int cpu); + +/* * Return true if the specified CPU has passed through a quiescent * state by virtue of being in or having passed through an dynticks * idle state since the last call to dyntick_save_progress_counter() @@ -812,16 +818,34 @@ static int rcu_implicit_dynticks_qs(struct rcu_data *rdp, */ rcu_kick_nohz_cpu(rdp->cpu); + /* + * Alternatively, the CPU might be running in the kernel + * for an extended period of time without a quiescent state. + * Attempt to force the CPU through the scheduler to gain the + * needed quiescent state, but only if the grace period has gone + * on for an uncommonly long time. If there are many stuck CPUs, + * we will beat on the first one until it gets unstuck, then move + * to the next. Only do this for the primary flavor of RCU. + */ + if (rdp->rsp == rcu_state && + ULONG_CMP_GE(ACCESS_ONCE(jiffies), rdp->rsp->jiffies_resched)) { + rdp->rsp->jiffies_resched += 5; + resched_cpu(rdp->cpu); + } + return 0; } static void record_gp_stall_check_time(struct rcu_state *rsp) { unsigned long j = ACCESS_ONCE(jiffies); + unsigned long j1; rsp->gp_start = j; smp_wmb(); /* Record start time before stall time. */ - rsp->jiffies_stall = j + rcu_jiffies_till_stall_check(); + j1 = rcu_jiffies_till_stall_check(); + rsp->jiffies_stall = j + j1; + rsp->jiffies_resched = j + j1 / 2; } /* diff --git a/kernel/rcu/tree.h b/kernel/rcu/tree.h index 52be957c9fe2..8e34d8674a4e 100644 --- a/kernel/rcu/tree.h +++ b/kernel/rcu/tree.h @@ -453,6 +453,8 @@ struct rcu_state { /* but in jiffies. */ unsigned long jiffies_stall; /* Time at which to check */ /* for CPU stalls. */ + unsigned long jiffies_resched; /* Time at which to resched */ + /* a reluctant CPU. */ unsigned long gp_max; /* Maximum GP duration in */ /* jiffies. */ const char *name; /* Name of structure. */ ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-12-06 0:26 ` Paul E. McKenney @ 2013-12-06 13:58 ` Jochen Striepe 2013-12-06 14:54 ` Paul E. McKenney 0 siblings, 1 reply; 17+ messages in thread From: Jochen Striepe @ 2013-12-06 13:58 UTC (permalink / raw) To: Paul E. McKenney; +Cc: linux-kernel, stable Hi again, On Thu, Dec 05, 2013 at 04:26:14PM -0800, Paul E. McKenney wrote: > Hmmm... Does the following patch help? [...] > rcu: Kick CPU halfway to RCU CPU stall warning The stall didn't appear at all since my last email, running 3.12.x kernels since release. But I will test your patch later today. I assume applying on top of 3.12.3 is correct? Best greetings, Jochen. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-12-06 13:58 ` Jochen Striepe @ 2013-12-06 14:54 ` Paul E. McKenney 2013-12-10 11:22 ` Jochen Striepe 0 siblings, 1 reply; 17+ messages in thread From: Paul E. McKenney @ 2013-12-06 14:54 UTC (permalink / raw) To: Jochen Striepe; +Cc: linux-kernel, stable On Fri, Dec 06, 2013 at 02:58:04PM +0100, Jochen Striepe wrote: > Hi again, > > On Thu, Dec 05, 2013 at 04:26:14PM -0800, Paul E. McKenney wrote: > > Hmmm... Does the following patch help? > [...] > > rcu: Kick CPU halfway to RCU CPU stall warning > > The stall didn't appear at all since my last email, running 3.12.x > kernels since release. But I will test your patch later today. I assume > applying on top of 3.12.3 is correct? 3.12.3 should take that patch just fine. Thanx, Paul ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-12-06 14:54 ` Paul E. McKenney @ 2013-12-10 11:22 ` Jochen Striepe 2013-12-16 22:40 ` Paul E. McKenney 0 siblings, 1 reply; 17+ messages in thread From: Jochen Striepe @ 2013-12-10 11:22 UTC (permalink / raw) To: Paul E. McKenney; +Cc: linux-kernel, stable Hi again, On Fri, Dec 06, 2013 at 06:54:41AM -0800, Paul E. McKenney wrote: > On Fri, Dec 06, 2013 at 02:58:04PM +0100, Jochen Striepe wrote: > > On Thu, Dec 05, 2013 at 04:26:14PM -0800, Paul E. McKenney wrote: > > > Hmmm... Does the following patch help? > > [...] > > > rcu: Kick CPU halfway to RCU CPU stall warning > > > > The stall didn't appear at all since my last email, running 3.12.x > > kernels since release. But I will test your patch later today. I assume > > applying on top of 3.12.3 is correct? > > 3.12.3 should take that patch just fine. Sorry for the delay. On my copy of 3.12.3, the patch does not apply. kernel/rcu/ does not exist, and the patch did not apply cleanly on kernel/rcutree.c: record_gp_stall_check_time() is a little different from what your patch expects, and I'm not that much into rcu work as to understand the implications. :) If you want me to go back to 3.12.0 I can do so, but as the issue does not reproduce very well I doubt that would help very much. Ideas? Is there a version of the patch for -stable, or does the patch conflict with the work done there? Best greetings, Jochen. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-12-10 11:22 ` Jochen Striepe @ 2013-12-16 22:40 ` Paul E. McKenney 2013-12-22 2:25 ` Jochen Striepe 0 siblings, 1 reply; 17+ messages in thread From: Paul E. McKenney @ 2013-12-16 22:40 UTC (permalink / raw) To: Jochen Striepe; +Cc: linux-kernel, stable [-- Attachment #1: Type: text/plain, Size: 1650 bytes --] On Tue, Dec 10, 2013 at 12:22:57PM +0100, Jochen Striepe wrote: > Hi again, > > On Fri, Dec 06, 2013 at 06:54:41AM -0800, Paul E. McKenney wrote: > > On Fri, Dec 06, 2013 at 02:58:04PM +0100, Jochen Striepe wrote: > > > On Thu, Dec 05, 2013 at 04:26:14PM -0800, Paul E. McKenney wrote: > > > > Hmmm... Does the following patch help? > > > [...] > > > > rcu: Kick CPU halfway to RCU CPU stall warning > > > > > > The stall didn't appear at all since my last email, running 3.12.x > > > kernels since release. But I will test your patch later today. I assume > > > applying on top of 3.12.3 is correct? > > > > 3.12.3 should take that patch just fine. > > Sorry for the delay. On my copy of 3.12.3, the patch does not apply. > kernel/rcu/ does not exist, and the patch did not apply cleanly on > kernel/rcutree.c: record_gp_stall_check_time() is a little different > from what your patch expects, and I'm not that much into rcu work as > to understand the implications. :) > > If you want me to go back to 3.12.0 I can do so, but as the issue > does not reproduce very well I doubt that would help very much. > Ideas? Is there a version of the patch for -stable, or does the > patch conflict with the work done there? And you are quite right, there is a prerequisite commit. I have attached both, please apply in numeric order. The subdirectory causes problems for patches, but git cherry-pick actually deals with this sort of thing. Because patch.2 has not yet made it to mainline, it is not yet eligible for -stable. I expect it to hit mainline in the 3.14 merge window, which will likely be coming up in a few weeks. Thanx, Paul [-- Attachment #2: stall.1 --] [-- Type: text/plain, Size: 5701 bytes --] commit 23d8cc5442afcd86cd0fcd116512e85c6cb6ecc8 Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Date: Wed Sep 4 10:51:13 2013 -0700 rcu: Reject memory-order-induced stall-warning false positives If a system is idle from an RCU perspective for longer than specified by CONFIG_RCU_CPU_STALL_TIMEOUT, and if one CPU starts a grace period just as a second checks for CPU stalls, and if this second CPU happens to see the old value of rsp->jiffies_stall, it will incorrectly report a CPU stall. This is quite rare, but apparently occurs deterministically on systems with about 6TB of memory. This commit therefore orders accesses to the data used to determine whether or not a CPU stall is in progress. Grace-period initialization and cleanup first increments rsp->completed to mark the end of the previous grace period, then records the current jiffies in rsp->gp_start, then records the jiffies at which a stall can be expected to occur in rsp->jiffies_stall, and finally increments rsp->gpnum to mark the start of the new grace period. Now, this ordering by itself does not prevent false positives. For example, if grace-period initialization was delayed between recording rsp->gp_start and rsp->jiffies_stall, the CPU stall warning code might still see an old value of rsp->jiffies_stall. Therefore, this commit also orders the CPU stall warning accesses as well, loading rsp->gpnum and jiffies, then rsp->jiffies_stall, then rsp->gp_start, and finally rsp->completed. This ordering means that the false-positive scenario in the previous paragraph would result in rsp->completed being greater than or equal to rsp->gpnum, which is never valid for a CPU stall, allowing the false positive to be rejected. Furthermore, any fetch that gets an old value of rsp->jiffies_stall must also get an old value of rsp->gpnum, which will again be rejected by the comparison of rsp->gpnum and rsp->completed. Situations where rsp->gp_start is later than rsp->jiffies_stall are also rejected, as are situations where jiffies is less than rsp->jiffies_stall. Although use of unsynchronized accesses means that there are likely still some false-positive scenarios (synchronization has proven to be a very bad idea on large systems), this should get rid of a large class of these scenarios. Reported-by: Fabian Herschel <fabian.herschel@suse.com> Reported-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jochen Striepe <jochen@tolot.escape.de> diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 32618b3fe4e6..44c50950a47f 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -802,8 +802,11 @@ static int rcu_implicit_dynticks_qs(struct rcu_data *rdp, static void record_gp_stall_check_time(struct rcu_state *rsp) { - rsp->gp_start = jiffies; - rsp->jiffies_stall = jiffies + rcu_jiffies_till_stall_check(); + unsigned long j = ACCESS_ONCE(jiffies); + + rsp->gp_start = j; + smp_wmb(); /* Record start time before stall time. */ + rsp->jiffies_stall = j + rcu_jiffies_till_stall_check(); } /* @@ -932,17 +935,48 @@ static void print_cpu_stall(struct rcu_state *rsp) static void check_cpu_stall(struct rcu_state *rsp, struct rcu_data *rdp) { + unsigned long completed; + unsigned long gpnum; + unsigned long gps; unsigned long j; unsigned long js; struct rcu_node *rnp; - if (rcu_cpu_stall_suppress) + if (rcu_cpu_stall_suppress || !rcu_gp_in_progress(rsp)) return; j = ACCESS_ONCE(jiffies); + + /* + * Lots of memory barriers to reject false positives. + * + * The idea is to pick up rsp->gpnum, then rsp->jiffies_stall, + * then rsp->gp_start, and finally rsp->completed. These values + * are updated in the opposite order with memory barriers (or + * equivalent) during grace-period initialization and cleanup. + * Now, a false positive can occur if we get an new value of + * rsp->gp_start and a old value of rsp->jiffies_stall. But given + * the memory barriers, the only way that this can happen is if one + * grace period ends and another starts between these two fetches. + * Detect this by comparing rsp->completed with the previous fetch + * from rsp->gpnum. + * + * Given this check, comparisons of jiffies, rsp->jiffies_stall, + * and rsp->gp_start suffice to forestall false positives. + */ + gpnum = ACCESS_ONCE(rsp->gpnum); + smp_rmb(); /* Pick up ->gpnum first... */ js = ACCESS_ONCE(rsp->jiffies_stall); + smp_rmb(); /* ...then ->jiffies_stall before the rest... */ + gps = ACCESS_ONCE(rsp->gp_start); + smp_rmb(); /* ...and finally ->gp_start before ->completed. */ + completed = ACCESS_ONCE(rsp->completed); + if (ULONG_CMP_GE(completed, gpnum) || + ULONG_CMP_LT(j, js) || + ULONG_CMP_GE(gps, js)) + return; /* No stall or GP completed since entering function. */ rnp = rdp->mynode; if (rcu_gp_in_progress(rsp) && - (ACCESS_ONCE(rnp->qsmask) & rdp->grpmask) && ULONG_CMP_GE(j, js)) { + (ACCESS_ONCE(rnp->qsmask) & rdp->grpmask)) { /* We haven't checked in, so go dump stack. */ print_cpu_stall(rsp); @@ -1315,9 +1349,10 @@ static int rcu_gp_init(struct rcu_state *rsp) } /* Advance to a new grace period and initialize state. */ + record_gp_stall_check_time(rsp); + smp_wmb(); /* Record GP times before starting GP. */ rsp->gpnum++; trace_rcu_grace_period(rsp->name, rsp->gpnum, TPS("start")); - record_gp_stall_check_time(rsp); raw_spin_unlock_irq(&rnp->lock); /* Exclude any concurrent CPU-hotplug operations. */ [-- Attachment #3: stall.2 --] [-- Type: text/plain, Size: 2935 bytes --] commit 3e640672638442e5df4d2d89687562bec37a8ef3 Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Date: Mon Sep 23 13:57:18 2013 -0700 rcu: Kick CPU halfway to RCU CPU stall warning When an RCU CPU stall warning occurs, the CPU invokes resched_cpu() on itself. This can help move the grace period forward in some situations, but it would be even better to do this -before- the RCU CPU stall warning. This commit therefore causes resched_cpu() to be called every five jiffies once the system is halfway to an RCU CPU stall warning. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 44c50950a47f..e6fd0f2ca2c6 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -740,6 +740,12 @@ static int dyntick_save_progress_counter(struct rcu_data *rdp, } /* + * This function really isn't for public consumption, but RCU is special in + * that context switches can allow the state machine to make progress. + */ +extern void resched_cpu(int cpu); + +/* * Return true if the specified CPU has passed through a quiescent * state by virtue of being in or having passed through an dynticks * idle state since the last call to dyntick_save_progress_counter() @@ -797,16 +803,34 @@ static int rcu_implicit_dynticks_qs(struct rcu_data *rdp, */ rcu_kick_nohz_cpu(rdp->cpu); + /* + * Alternatively, the CPU might be running in the kernel + * for an extended period of time without a quiescent state. + * Attempt to force the CPU through the scheduler to gain the + * needed quiescent state, but only if the grace period has gone + * on for an uncommonly long time. If there are many stuck CPUs, + * we will beat on the first one until it gets unstuck, then move + * to the next. Only do this for the primary flavor of RCU. + */ + if (rdp->rsp == rcu_state && + ULONG_CMP_GE(ACCESS_ONCE(jiffies), rdp->rsp->jiffies_resched)) { + rdp->rsp->jiffies_resched += 5; + resched_cpu(rdp->cpu); + } + return 0; } static void record_gp_stall_check_time(struct rcu_state *rsp) { unsigned long j = ACCESS_ONCE(jiffies); + unsigned long j1; rsp->gp_start = j; smp_wmb(); /* Record start time before stall time. */ - rsp->jiffies_stall = j + rcu_jiffies_till_stall_check(); + j1 = rcu_jiffies_till_stall_check(); + rsp->jiffies_stall = j + j1; + rsp->jiffies_resched = j + j1 / 2; } /* diff --git a/kernel/rcutree.h b/kernel/rcutree.h index 5f97eab602cd..9515222fdf88 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -451,6 +451,8 @@ struct rcu_state { /* but in jiffies. */ unsigned long jiffies_stall; /* Time at which to check */ /* for CPU stalls. */ + unsigned long jiffies_resched; /* Time at which to resched */ + /* a reluctant CPU. */ unsigned long gp_max; /* Maximum GP duration in */ /* jiffies. */ const char *name; /* Name of structure. */ ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-12-16 22:40 ` Paul E. McKenney @ 2013-12-22 2:25 ` Jochen Striepe 2013-12-22 4:58 ` Paul E. McKenney 2013-12-27 17:15 ` Jochen Striepe 0 siblings, 2 replies; 17+ messages in thread From: Jochen Striepe @ 2013-12-22 2:25 UTC (permalink / raw) To: Paul E. McKenney; +Cc: linux-kernel, stable Hi! On Mon, Dec 16, 2013 at 02:40:06PM -0800, Paul E. McKenney wrote: > > > > > rcu: Kick CPU halfway to RCU CPU stall warning [...] > And you are quite right, there is a prerequisite commit. I have attached > both, please apply in numeric order. Applies, compiles, and runs smoothly on top of 3.12.6. I'll send word if anything odd shows up. > Because patch.2 has not yet made it to mainline, it is not yet eligible > for -stable. I expect it to hit mainline in the 3.14 merge window, > which will likely be coming up in a few weeks. Ah, ok. Thanks for helping and informing! Have a nice Christmas holiday, Jochen. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-12-22 2:25 ` Jochen Striepe @ 2013-12-22 4:58 ` Paul E. McKenney 2013-12-27 17:15 ` Jochen Striepe 1 sibling, 0 replies; 17+ messages in thread From: Paul E. McKenney @ 2013-12-22 4:58 UTC (permalink / raw) To: Jochen Striepe; +Cc: linux-kernel, stable On Sun, Dec 22, 2013 at 03:25:23AM +0100, Jochen Striepe wrote: > Hi! > > On Mon, Dec 16, 2013 at 02:40:06PM -0800, Paul E. McKenney wrote: > > > > > > rcu: Kick CPU halfway to RCU CPU stall warning > [...] > > And you are quite right, there is a prerequisite commit. I have attached > > both, please apply in numeric order. > > Applies, compiles, and runs smoothly on top of 3.12.6. I'll send word > if anything odd shows up. Thank you for your testing! > > Because patch.2 has not yet made it to mainline, it is not yet eligible > > for -stable. I expect it to hit mainline in the 3.14 merge window, > > which will likely be coming up in a few weeks. > > Ah, ok. Thanks for helping and informing! > > > Have a nice Christmas holiday, And you and yours! Thanx, Paul ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-12-22 2:25 ` Jochen Striepe 2013-12-22 4:58 ` Paul E. McKenney @ 2013-12-27 17:15 ` Jochen Striepe 2013-12-27 18:08 ` Paul E. McKenney 1 sibling, 1 reply; 17+ messages in thread From: Jochen Striepe @ 2013-12-27 17:15 UTC (permalink / raw) To: Paul E. McKenney; +Cc: linux-kernel, stable Hi, On Sun, Dec 22, 2013 at 03:25:23AM +0100, Jochen Striepe wrote: > Applies, compiles, and runs smoothly on top of 3.12.6. I'll send word > if anything odd shows up. Tested with various loads, everything nice and working so far. Have a nice weekend, Jochen. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: 3.10.5: rcu_sched detected stalls on CPUs/tasks 2013-12-27 17:15 ` Jochen Striepe @ 2013-12-27 18:08 ` Paul E. McKenney 0 siblings, 0 replies; 17+ messages in thread From: Paul E. McKenney @ 2013-12-27 18:08 UTC (permalink / raw) To: Jochen Striepe; +Cc: linux-kernel, stable On Fri, Dec 27, 2013 at 06:15:07PM +0100, Jochen Striepe wrote: > Hi, > > On Sun, Dec 22, 2013 at 03:25:23AM +0100, Jochen Striepe wrote: > > Applies, compiles, and runs smoothly on top of 3.12.6. I'll send word > > if anything odd shows up. > > Tested with various loads, everything nice and working so far. Thank you for your testing efforts! Thanx, Paul ^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2013-12-27 18:08 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20130813103202.GB2338@pompeji.miese-zwerge.org>
[not found] ` <20130818180232.GL29406@linux.vnet.ibm.com>
[not found] ` <20130818184848.GA2398@pompeji.miese-zwerge.org>
2013-09-09 21:58 ` 3.10.5: rcu_sched detected stalls on CPUs/tasks Jochen Striepe
2013-09-09 22:27 ` Paul E. McKenney
2013-09-10 7:45 ` Jochen Striepe
2013-09-10 17:54 ` Paul E. McKenney
2013-09-11 10:34 ` Jochen Striepe
2013-09-14 11:28 ` Jochen Striepe
2013-09-14 18:36 ` Paul E. McKenney
2013-09-23 16:49 ` Jochen Striepe
2013-12-06 0:26 ` Paul E. McKenney
2013-12-06 13:58 ` Jochen Striepe
2013-12-06 14:54 ` Paul E. McKenney
2013-12-10 11:22 ` Jochen Striepe
2013-12-16 22:40 ` Paul E. McKenney
2013-12-22 2:25 ` Jochen Striepe
2013-12-22 4:58 ` Paul E. McKenney
2013-12-27 17:15 ` Jochen Striepe
2013-12-27 18:08 ` Paul E. McKenney
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).