stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org,
	Matthias Schiffer <mschiffer@universe-factory.net>,
	Marek Lindner <mareklindner@neomailbox.ch>,
	Antonio Quartulli <antonio@meshcoding.com>,
	David Miller <davem@davemloft.net>
Subject: [PATCH 3.10 11/24] batman-adv: set up network coding packet handlers during module init
Date: Mon, 18 Nov 2013 10:42:21 -0800	[thread overview]
Message-ID: <20131118184222.837549883@linuxfoundation.org> (raw)
In-Reply-To: <20131118184222.017393843@linuxfoundation.org>

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthias Schiffer <mschiffer@universe-factory.net>

commit 6c519bad7b19a2c14a075b400edabaa630330123 upstream.

batman-adv saves its table of packet handlers as a global state, so handlers
must be set up only once (and setting them up a second time will fail).

The recently-added network coding support tries to set up its handler each time
a new softif is registered, which obviously fails when more that one softif is
used (and in consequence, the softif creation fails).

Fix this by splitting up batadv_nc_init into batadv_nc_init (which is called
only once) and batadv_nc_mesh_init (which is called for each softif); in
addition batadv_nc_free is renamed to batadv_nc_mesh_free to keep naming
consistent.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/batman-adv/main.c           |    5 +++--
 net/batman-adv/network-coding.c |   28 ++++++++++++++++++----------
 net/batman-adv/network-coding.h |   14 ++++++++++----
 3 files changed, 31 insertions(+), 16 deletions(-)

--- a/net/batman-adv/main.c
+++ b/net/batman-adv/main.c
@@ -61,6 +61,7 @@ static int __init batadv_init(void)
 	batadv_recv_handler_init();
 
 	batadv_iv_init();
+	batadv_nc_init();
 
 	batadv_event_workqueue = create_singlethread_workqueue("bat_events");
 
@@ -138,7 +139,7 @@ int batadv_mesh_init(struct net_device *
 	if (ret < 0)
 		goto err;
 
-	ret = batadv_nc_init(bat_priv);
+	ret = batadv_nc_mesh_init(bat_priv);
 	if (ret < 0)
 		goto err;
 
@@ -163,7 +164,7 @@ void batadv_mesh_free(struct net_device
 	batadv_vis_quit(bat_priv);
 
 	batadv_gw_node_purge(bat_priv);
-	batadv_nc_free(bat_priv);
+	batadv_nc_mesh_free(bat_priv);
 	batadv_dat_free(bat_priv);
 	batadv_bla_free(bat_priv);
 
--- a/net/batman-adv/network-coding.c
+++ b/net/batman-adv/network-coding.c
@@ -35,6 +35,20 @@ static int batadv_nc_recv_coded_packet(s
 				       struct batadv_hard_iface *recv_if);
 
 /**
+ * batadv_nc_init - one-time initialization for network coding
+ */
+int __init batadv_nc_init(void)
+{
+	int ret;
+
+	/* Register our packet type */
+	ret = batadv_recv_handler_register(BATADV_CODED,
+					   batadv_nc_recv_coded_packet);
+
+	return ret;
+}
+
+/**
  * batadv_nc_start_timer - initialise the nc periodic worker
  * @bat_priv: the bat priv with all the soft interface information
  */
@@ -45,10 +59,10 @@ static void batadv_nc_start_timer(struct
 }
 
 /**
- * batadv_nc_init - initialise coding hash table and start house keeping
+ * batadv_nc_mesh_init - initialise coding hash table and start house keeping
  * @bat_priv: the bat priv with all the soft interface information
  */
-int batadv_nc_init(struct batadv_priv *bat_priv)
+int batadv_nc_mesh_init(struct batadv_priv *bat_priv)
 {
 	bat_priv->nc.timestamp_fwd_flush = jiffies;
 	bat_priv->nc.timestamp_sniffed_purge = jiffies;
@@ -70,11 +84,6 @@ int batadv_nc_init(struct batadv_priv *b
 	batadv_hash_set_lock_class(bat_priv->nc.coding_hash,
 				   &batadv_nc_decoding_hash_lock_class_key);
 
-	/* Register our packet type */
-	if (batadv_recv_handler_register(BATADV_CODED,
-					 batadv_nc_recv_coded_packet) < 0)
-		goto err;
-
 	INIT_DELAYED_WORK(&bat_priv->nc.work, batadv_nc_worker);
 	batadv_nc_start_timer(bat_priv);
 
@@ -1722,12 +1731,11 @@ free_nc_packet:
 }
 
 /**
- * batadv_nc_free - clean up network coding memory
+ * batadv_nc_mesh_free - clean up network coding memory
  * @bat_priv: the bat priv with all the soft interface information
  */
-void batadv_nc_free(struct batadv_priv *bat_priv)
+void batadv_nc_mesh_free(struct batadv_priv *bat_priv)
 {
-	batadv_recv_handler_unregister(BATADV_CODED);
 	cancel_delayed_work_sync(&bat_priv->nc.work);
 
 	batadv_nc_purge_paths(bat_priv, bat_priv->nc.coding_hash, NULL);
--- a/net/batman-adv/network-coding.h
+++ b/net/batman-adv/network-coding.h
@@ -22,8 +22,9 @@
 
 #ifdef CONFIG_BATMAN_ADV_NC
 
-int batadv_nc_init(struct batadv_priv *bat_priv);
-void batadv_nc_free(struct batadv_priv *bat_priv);
+int batadv_nc_init(void);
+int batadv_nc_mesh_init(struct batadv_priv *bat_priv);
+void batadv_nc_mesh_free(struct batadv_priv *bat_priv);
 void batadv_nc_update_nc_node(struct batadv_priv *bat_priv,
 			      struct batadv_orig_node *orig_node,
 			      struct batadv_orig_node *orig_neigh_node,
@@ -47,12 +48,17 @@ int batadv_nc_init_debugfs(struct batadv
 
 #else /* ifdef CONFIG_BATMAN_ADV_NC */
 
-static inline int batadv_nc_init(struct batadv_priv *bat_priv)
+static inline int batadv_nc_init(void)
 {
 	return 0;
 }
 
-static inline void batadv_nc_free(struct batadv_priv *bat_priv)
+static inline int batadv_nc_mesh_init(struct batadv_priv *bat_priv)
+{
+	return 0;
+}
+
+static inline void batadv_nc_mesh_free(struct batadv_priv *bat_priv)
 {
 	return;
 }



  parent reply	other threads:[~2013-11-18 18:42 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-18 18:42 [PATCH 3.10 00/24] 3.10.20-stable review Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 01/24] ip_gre: Fix WCCPv2 header parsing Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 02/24] ipv6: ip6_dst_check needs to check for expired dst_entries Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 03/24] ipv6: reset dst.expires value when clearing expire flag Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 04/24] cxgb3: Fix length calculation in write_ofld_wr() on 32-bit architectures Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 05/24] xen-netback: use jiffies_64 value to calculate credit timeout Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 06/24] virtio-net: correctly handle cpu hotplug notifier during resuming Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 07/24] net: flow_dissector: fail on evil iph->ihl Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 08/24] net/mlx4_core: Fix call to __mlx4_unregister_mac Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 09/24] xen-netback: Handle backend state transitions in a more robust way Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 10/24] xen-netback: transition to CLOSED when removing a VIF Greg Kroah-Hartman
2013-11-18 18:42 ` Greg Kroah-Hartman [this message]
2013-11-18 18:42 ` [PATCH 3.10 12/24] hyperv-fb: add pci stub Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 13/24] USB: add new zte 3g-dongles pid to option.c Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 14/24] ALSA: hda - hdmi: Fix reported channel map on common default layouts Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 15/24] tracing: Fix potential out-of-bounds in trace_get_user() Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 16/24] perf: Fix perf ring buffer memory ordering Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 17/24] iwlwifi: add new 7260 and 3160 series device IDs Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 18/24] iwlwifi: pcie: add new SKUs for 7000 & 3160 NIC series Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 19/24] misc: atmel_pwm: add deferred-probing support Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 20/24] backlight: atmel-pwm-bl: fix deferred probe from __init Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 21/24] usb: fix cleanup after failure in hub_configure() Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 22/24] usb: fail on usb_hub_create_port_device() errors Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 23/24] usbcore: set lpm_capable field for LPM capable root hubs Greg Kroah-Hartman
2013-11-18 18:42 ` [PATCH 3.10 24/24] media: sh_vou: almost forever loop in sh_vou_try_fmt_vid_out() Greg Kroah-Hartman
2013-11-19  3:08 ` [PATCH 3.10 00/24] 3.10.20-stable review Guenter Roeck
2013-11-20 11:05 ` Satoru Takeuchi
2013-11-20 15:27 ` Shuah Khan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131118184222.837549883@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=antonio@meshcoding.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mareklindner@neomailbox.ch \
    --cc=mschiffer@universe-factory.net \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).