From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, David Chang , Hayes Wang , "David S. Miller" Subject: [PATCH 3.10 34/58] r8169: check ALDPS bit and disable it if enabled for the 8168g Date: Fri, 6 Dec 2013 13:52:05 -0800 Message-Id: <20131206214848.064183413@linuxfoundation.org> In-Reply-To: <20131206214844.906193530@linuxfoundation.org> References: <20131206214844.906193530@linuxfoundation.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: 3.10-stable review patch. If anyone has any objections, please let me know. ------------------ From: David Chang [ Upstream commit 1bac1072425c86f1ac85bd5967910706677ef8b3 ] Windows driver will enable ALDPS function, but linux driver and firmware do not have any configuration related to ALDPS function for 8168g. So restart system to linux and remove the NIC cable, LAN enter ALDPS, then LAN RX will be disabled. This issue can be easily reproduced on dual boot windows and linux system with RTL_GIGA_MAC_VER_40 chip. Realtek said, ALDPS function can be disabled by configuring to PHY, switch to page 0x0A43, reg0x10 bit2=0. Signed-off-by: David Chang Acked-by: Hayes Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/realtek/r8169.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3456,6 +3456,11 @@ static void rtl8168g_1_hw_phy_config(str rtl_writephy(tp, 0x14, 0x9065); rtl_writephy(tp, 0x14, 0x1065); + /* Check ALDPS bit, disable it if enabled */ + rtl_writephy(tp, 0x1f, 0x0a43); + if (rtl_readphy(tp, 0x10) & 0x0004) + rtl_w1w0_phy(tp, 0x10, 0x0000, 0x0004); + rtl_writephy(tp, 0x1f, 0x0000); }