[PATCH 3.4 00/25] 3.4.74-stable review

[PATCH 3.4 00/25] 3.4.74-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.4.74 release.
There are 25 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Dec 12 07:59:15 UTC 2013.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.74-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.4.74-rc1

Alan Cox <alan@linux.intel.com>
    drivers/char/i8k.c: add Dell XPLS L421X

David Cluytens <david.cluytens@gmail.com>
    USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem

Colin Leitner <colin.leitner@googlemail.com>
    USB: spcp8x5: correct handling of CS5 setting

Colin Leitner <colin.leitner@googlemail.com>
    USB: mos7840: correct handling of CS5 setting

Colin Leitner <colin.leitner@googlemail.com>
    USB: pl2303: fixed handling of CS5 setting

Seth Heasley <seth.heasley@intel.com>
    i2c: i801: SMBus patch for Intel Avoton DeviceIDs

Seth Heasley <seth.heasley@intel.com>
    ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs

James Ralston <james.d.ralston@intel.com>
    ahci: Add Device IDs for Intel Lynx Point-LP PCH

Sergei Trofimovich <slyfox@gentoo.org>
    um: add missing declaration of 'getrlimit()' and friends

Tom Gundersen <teg@jklm.no>
    Input: mousedev - allow disabling even without CONFIG_EXPERT

Tom Gundersen <teg@jklm.no>
    Input: allow deselecting serio drivers even without CONFIG_EXPERT

Shawn Landden <shawn@churchofgit.com>
    net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST

Laxman Dewangan <ldewangan@nvidia.com>
    irq: Enable all irqs unconditionally in irq_resume

Liu Gang <Gang.Liu@freescale.com>
    powerpc/gpio: Fix the wrong GPIO input data on MPC8572/MPC8536

Trond Myklebust <Trond.Myklebust@netapp.com>
    NFSv4: Update list of irrecoverable errors on DELEGRETURN

Linus Walleij <linus.walleij@linaro.org>
    net: smc91: fix crash regression on the versatile

Stephen M. Cameron <scameron@beardog.cce.hp.com>
    SCSI: hpsa: return 0 from driver probe function on success, not 1

Stephen M. Cameron <scameron@beardog.cce.hp.com>
    SCSI: hpsa: do not discard scsi status on aborted commands

Dan Williams <dan.j.williams@intel.com>
    SCSI: libsas: fix usage of ata_tf_to_fis

James Bottomley <JBottomley@Parallels.com>
    SCSI: enclosure: fix WARN_ON in dual path device removing

Bo Shen <voice.shen@atmel.com>
    ASoC: wm8731: fix dsp mode configuration

Mark Brown <broonie@linaro.org>
    ASoC: wm8990: Mark the register map as dirty when powering down

Tom Lendacky <thomas.lendacky@amd.com>
    crypto: authenc - Find proper IV address in ablkcipher callback

Horia Geanta <horia.geanta@freescale.com>
    crypto: ccm - Fix handling of zero plaintext when computing mac

Tom Lendacky <thomas.lendacky@amd.com>
    crypto: scatterwalk - Set the chain pointer indication bit


-------------

Diffstat:

 Documentation/i2c/busses/i2c-i801  |  1 +
 Makefile                           |  4 ++--
 arch/um/os-Linux/start_up.c        |  2 ++
 crypto/algif_hash.c                |  3 +++
 crypto/algif_skcipher.c            |  3 +++
 crypto/authenc.c                   |  7 ++++---
 crypto/ccm.c                       |  3 ++-
 drivers/ata/ahci.c                 | 24 ++++++++++++++++++++++++
 drivers/char/i8k.c                 |  7 +++++++
 drivers/gpio/gpio-mpc8xxx.c        |  8 ++++++--
 drivers/i2c/busses/Kconfig         |  1 +
 drivers/i2c/busses/i2c-i801.c      |  3 +++
 drivers/input/Kconfig              |  2 +-
 drivers/input/keyboard/Kconfig     |  4 ++--
 drivers/input/serio/Kconfig        |  6 +++---
 drivers/misc/enclosure.c           |  7 +++++++
 drivers/net/ethernet/smsc/smc91x.h | 22 ++++------------------
 drivers/scsi/hpsa.c                |  4 ++--
 drivers/scsi/libsas/sas_ata.c      |  2 +-
 drivers/usb/class/cdc-acm.c        |  2 ++
 drivers/usb/serial/mos7840.c       | 32 ++++++++++++++++----------------
 drivers/usb/serial/pl2303.c        | 32 +++++++++++++++-----------------
 drivers/usb/serial/spcp8x5.c       | 30 ++++++++++++++----------------
 fs/nfs/nfs4proc.c                  | 10 ++++++++--
 include/crypto/scatterwalk.h       |  1 +
 kernel/irq/pm.c                    |  2 +-
 net/ipv4/udp.c                     |  3 +++
 sound/soc/codecs/wm8731.c          |  4 ++--
 sound/soc/codecs/wm8990.c          |  2 ++
 29 files changed, 142 insertions(+), 89 deletions(-)

[PATCH 3.4 01/25] crypto: scatterwalk - Set the chain pointer indication bit

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tom Lendacky <thomas.lendacky@amd.com>

commit 41da8b5adba77e22584f8b45f9641504fa885308 upstream.

The scatterwalk_crypto_chain function invokes the scatterwalk_sg_chain
function to chain two scatterlists, but the chain pointer indication
bit is not set.  When the resulting scatterlist is used, for example,
by sg_nents to count the number of scatterlist entries, a segfault occurs
because sg_nents does not follow the chain pointer to the chained scatterlist.

Update scatterwalk_sg_chain to set the chain pointer indication bit as is
done by the sg_chain function.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/crypto/scatterwalk.h |    1 +
 1 file changed, 1 insertion(+)

--- a/include/crypto/scatterwalk.h
+++ b/include/crypto/scatterwalk.h
@@ -36,6 +36,7 @@ static inline void scatterwalk_sg_chain(
 {
 	sg_set_page(&sg1[num - 1], (void *)sg2, 0, 0);
 	sg1[num - 1].page_link &= ~0x02;
+	sg1[num - 1].page_link |= 0x01;
 }
 
 static inline struct scatterlist *scatterwalk_sg_next(struct scatterlist *sg)

RE: [PATCH 3.4 01/25] crypto: scatterwalk - Set the chain pointer indication bit

[Lendacky, Thomas]

Hi Greg,

This patch is probably not needed in any of the stable branches, but if
you do add it you'll need to also include a patch that changes the use
of an sg_page to an sg_chain_ptr to prevent a BUG_ON when CONFIG_DEBUG_SG
is enabled (http://marc.info/?l=linux-crypto-vger&m=138627061905651&w=2).

Thanks,
Tom


-----Original Message-----
From: Greg Kroah-Hartman [mailto:gregkh@linuxfoundation.org] 
Sent: Tuesday, December 10, 2013 2:00 AM
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman; stable@vger.kernel.org; Lendacky, Thomas; Herbert Xu
Subject: [PATCH 3.4 01/25] crypto: scatterwalk - Set the chain pointer indication bit

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tom Lendacky <thomas.lendacky@amd.com>

commit 41da8b5adba77e22584f8b45f9641504fa885308 upstream.

The scatterwalk_crypto_chain function invokes the scatterwalk_sg_chain function to chain two scatterlists, but the chain pointer indication bit is not set.  When the resulting scatterlist is used, for example, by sg_nents to count the number of scatterlist entries, a segfault occurs because sg_nents does not follow the chain pointer to the chained scatterlist.

Update scatterwalk_sg_chain to set the chain pointer indication bit as is done by the sg_chain function.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/crypto/scatterwalk.h |    1 +
 1 file changed, 1 insertion(+)

--- a/include/crypto/scatterwalk.h
+++ b/include/crypto/scatterwalk.h
@@ -36,6 +36,7 @@ static inline void scatterwalk_sg_chain(  {
 	sg_set_page(&sg1[num - 1], (void *)sg2, 0, 0);
 	sg1[num - 1].page_link &= ~0x02;
+	sg1[num - 1].page_link |= 0x01;
 }
 
 static inline struct scatterlist *scatterwalk_sg_next(struct scatterlist *sg)

Re: [PATCH 3.4 01/25] crypto: scatterwalk - Set the chain pointer indication bit

[Greg Kroah-Hartman]

On Tue, Dec 10, 2013 at 02:46:46PM +0000, Lendacky, Thomas wrote:
> Hi Greg,
> 
> This patch is probably not needed in any of the stable branches, but if
> you do add it you'll need to also include a patch that changes the use
> of an sg_page to an sg_chain_ptr to prevent a BUG_ON when CONFIG_DEBUG_SG
> is enabled (http://marc.info/?l=linux-crypto-vger&m=138627061905651&w=2).

You are referring to commit 389a5390583a18e45bc4abd4439291abec5e7a63 in
Linus's tree, right?  It's in my queue to apply after 3.13-rc4 comes
out, but I guess it's good to add it now as it is known that this is an
issue to be resolved.

I'll go do that right now, thanks for letting me know.

greg k-h

Re: [PATCH 3.4 01/25] crypto: scatterwalk - Set the chain pointer indication bit

[Tom Lendacky]

On Tuesday, December 10, 2013 06:02:29 PM Greg Kroah-Hartman wrote:
> On Tue, Dec 10, 2013 at 02:46:46PM +0000, Lendacky, Thomas wrote:
> > Hi Greg,
> > 
> > This patch is probably not needed in any of the stable branches, but if
> > you do add it you'll need to also include a patch that changes the use
> > of an sg_page to an sg_chain_ptr to prevent a BUG_ON when CONFIG_DEBUG_SG
> > is enabled (http://marc.info/?l=linux-crypto-vger&m=138627061905651&w=2).
> 
> You are referring to commit 389a5390583a18e45bc4abd4439291abec5e7a63 in
> Linus's tree, right?  It's in my queue to apply after 3.13-rc4 comes

Yes, that's the one.

Thanks,
Tom

> out, but I guess it's good to add it now as it is known that this is an
> issue to be resolved.
> 
> I'll go do that right now, thanks for letting me know.
> 
> greg k-h

[PATCH 3.4 02/25] crypto: ccm - Fix handling of zero plaintext when computing mac

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Horia Geanta <horia.geanta@freescale.com>

commit 5638cabf3e4883f38dfb246c30980cebf694fbda upstream.

There are cases when cryptlen can be zero in crypto_ccm_auth():
-encryptiom: input scatterlist length is zero (no plaintext)
-decryption: input scatterlist contains only the mac
plus the condition of having different source and destination buffers
(or else scatterlist length = max(plaintext_len, ciphertext_len)).

These are not handled correctly, leading to crashes like:

root@p4080ds:~/crypto# insmod tcrypt.ko mode=45
------------[ cut here ]------------
kernel BUG at crypto/scatterwalk.c:37!
Oops: Exception in kernel mode, sig: 5 [#1]
SMP NR_CPUS=8 P4080 DS
Modules linked in: tcrypt(+) crc32c xts xcbc vmac pcbc ecb gcm ghash_generic gf128mul ccm ctr seqiv
CPU: 3 PID: 1082 Comm: cryptomgr_test Not tainted 3.11.0 #14
task: ee12c5b0 ti: eecd0000 task.ti: eecd0000
NIP: c0204d98 LR: f9225848 CTR: c0204d80
REGS: eecd1b70 TRAP: 0700   Not tainted  (3.11.0)
MSR: 00029002 <CE,EE,ME>  CR: 22044022  XER: 20000000

GPR00: f9225c94 eecd1c20 ee12c5b0 eecd1c28 ee879400 ee879400 00000000 ee607464
GPR08: 00000001 00000001 00000000 006b0000 c0204d80 00000000 00000002 c0698e20
GPR16: ee987000 ee895000 fffffff4 ee879500 00000100 eecd1d58 00000001 00000000
GPR24: ee879400 00000020 00000000 00000000 ee5b2800 ee607430 00000004 ee607460
NIP [c0204d98] scatterwalk_start+0x18/0x30
LR [f9225848] get_data_to_compute+0x28/0x2f0 [ccm]
Call Trace:
[eecd1c20] [f9225974] get_data_to_compute+0x154/0x2f0 [ccm] (unreliable)
[eecd1c70] [f9225c94] crypto_ccm_auth+0x184/0x1d0 [ccm]
[eecd1cb0] [f9225d40] crypto_ccm_encrypt+0x60/0x2d0 [ccm]
[eecd1cf0] [c020d77c] __test_aead+0x3ec/0xe20
[eecd1e20] [c020f35c] test_aead+0x6c/0xe0
[eecd1e40] [c020f420] alg_test_aead+0x50/0xd0
[eecd1e60] [c020e5e4] alg_test+0x114/0x2e0
[eecd1ee0] [c020bd1c] cryptomgr_test+0x4c/0x60
[eecd1ef0] [c0047058] kthread+0xa8/0xb0
[eecd1f40] [c000eb0c] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
0f080000 81290024 552807fe 0f080000 5529003a 4bffffb4 90830000 39400000
39000001 8124000c 2f890000 7d28579e <0f090000> 81240008 91230004 4e800020
---[ end trace 6d652dfcd1be37bd ]---

Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/ccm.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/crypto/ccm.c
+++ b/crypto/ccm.c
@@ -271,7 +271,8 @@ static int crypto_ccm_auth(struct aead_r
 	}
 
 	/* compute plaintext into mac */
-	get_data_to_compute(cipher, pctx, plain, cryptlen);
+	if (cryptlen)
+		get_data_to_compute(cipher, pctx, plain, cryptlen);
 
 out:
 	return err;

[PATCH 3.4 03/25] crypto: authenc - Find proper IV address in ablkcipher callback

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tom Lendacky <thomas.lendacky@amd.com>

commit fc019c7122dfcd69c50142b57a735539aec5da95 upstream.

When performing an asynchronous ablkcipher operation the authenc
completion callback routine is invoked, but it does not locate and use
the proper IV.

The callback routine, crypto_authenc_encrypt_done, is updated to use
the same method of calculating the address of the IV as is done in
crypto_authenc_encrypt function which sets up the callback.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/authenc.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -368,9 +368,10 @@ static void crypto_authenc_encrypt_done(
 	if (!err) {
 		struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
 		struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
-		struct ablkcipher_request *abreq = aead_request_ctx(areq);
-		u8 *iv = (u8 *)(abreq + 1) +
-			 crypto_ablkcipher_reqsize(ctx->enc);
+		struct authenc_request_ctx *areq_ctx = aead_request_ctx(areq);
+		struct ablkcipher_request *abreq = (void *)(areq_ctx->tail
+							    + ctx->reqoff);
+		u8 *iv = (u8 *)abreq - crypto_ablkcipher_ivsize(ctx->enc);
 
 		err = crypto_authenc_genicv(areq, iv, 0);
 	}

[PATCH 3.4 04/25] ASoC: wm8990: Mark the register map as dirty when powering down

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@linaro.org>

commit 2ab2b74277a86afe0dd92976db695a2bb8b93366 upstream.

Otherwise we'll skip sync on resume.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/wm8990.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -1265,6 +1265,8 @@ static int wm8990_set_bias_level(struct
 
 		/* disable POBCTRL, SOFT_ST and BUFDCOPEN */
 		snd_soc_write(codec, WM8990_ANTIPOP2, 0x0);
+
+		codec->cache_sync = 1;
 		break;
 	}
 

[PATCH 3.4 05/25] ASoC: wm8731: fix dsp mode configuration

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bo Shen <voice.shen@atmel.com>

commit b4af6ef99a60c5b56df137d7accd81ba1ee1254e upstream.

According to WM8731 "PD, Rev 4.9 October 2012" datasheet, when it
works in DSP mode A, LRP = 1, while works in DSP mode B, LRP = 0.
So, fix LRP for DSP mode as the datesheet specification.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/wm8731.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -406,10 +406,10 @@ static int wm8731_set_dai_fmt(struct snd
 		iface |= 0x0001;
 		break;
 	case SND_SOC_DAIFMT_DSP_A:
-		iface |= 0x0003;
+		iface |= 0x0013;
 		break;
 	case SND_SOC_DAIFMT_DSP_B:
-		iface |= 0x0013;
+		iface |= 0x0003;
 		break;
 	default:
 		return -EINVAL;

[PATCH 3.4 06/25] SCSI: enclosure: fix WARN_ON in dual path device removing

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Bottomley <JBottomley@Parallels.com>

commit a1470c7bf3a4676e62e4c0fb204e339399eb5c59 upstream.

Bug report from: wenxiong@linux.vnet.ibm.com

The issue is happened in dual controller configuration. We got the
sysfs warnings when rmmod the ipr module.

enclosure_unregister() in drivers/msic/enclosure.c, call device_unregister()
for each componment deivce, device_unregister() ->device_del()->kobject_del()
->sysfs_remove_dir(). In sysfs_remove_dir(), set kobj->sd = NULL.

For each componment device,
enclosure_component_release()->enclosure_remove_links()->sysfs_remove_link()
in which checking kobj->sd again, it has been set as NULL when doing
device_unregister. So we saw all these sysfs WARNING.

Tested-by: wenxiong@linux.vnet.ibm.com
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/enclosure.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -198,6 +198,13 @@ static void enclosure_remove_links(struc
 {
 	char name[ENCLOSURE_NAME_SIZE];
 
+	/*
+	 * In odd circumstances, like multipath devices, something else may
+	 * already have removed the links, so check for this condition first.
+	 */
+	if (!cdev->dev->kobj.sd)
+		return;
+
 	enclosure_link_name(cdev, name);
 	sysfs_remove_link(&cdev->dev->kobj, name);
 	sysfs_remove_link(&cdev->cdev.kobj, "device");

[PATCH 3.4 07/25] SCSI: libsas: fix usage of ata_tf_to_fis

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit ae5fbae0ccd982dfca0ce363036ed92f5b13f150 upstream.

Since commit 110dd8f19df5 "[SCSI] libsas: fix scr_read/write users and
update the libata documentation" we have been passing pmp=1 and is_cmd=0
to ata_tf_to_fis().  Praveen reports that eSATA attached drives do not
discover correctly.  His investigation found that the BIOS was passing
pmp=0 while Linux was passing pmp=1 and failing to discover the drives.
Update libsas to follow the libata example of pulling the pmp setting
from the ata_link and correct is_cmd to be 1 since all tf's submitted
through ->qc_issue are commands.  Presumably libsas lldds do not care
about is_cmd as they have sideband mechanisms to perform link
management.

http://marc.info/?l=linux-scsi&m=138179681726990

[jejb: checkpatch fix]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Praveen Murali <pmurali@logicube.com>
Tested-by: Praveen Murali <pmurali@logicube.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/libsas/sas_ata.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -211,7 +211,7 @@ static unsigned int sas_ata_qc_issue(str
 		qc->tf.nsect = 0;
 	}
 
-	ata_tf_to_fis(&qc->tf, 1, 0, (u8*)&task->ata_task.fis);
+	ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis);
 	task->uldd_task = qc;
 	if (ata_is_atapi(qc->tf.protocol)) {
 		memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);

[PATCH 3.4 08/25] SCSI: hpsa: do not discard scsi status on aborted commands

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>

commit 2e311fbabdc23b7eaec77313dc3b9a151a5407b5 upstream.

We inadvertantly discarded the scsi status for aborted commands.
For some commands (e.g. reads from tape drives) these can't be retried,
and if we discarded the scsi status, the scsi mid layer couldn't notice
anything was wrong and the error was not reported.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/hpsa.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1219,7 +1219,7 @@ static void complete_scsi_command(struct
 					"has check condition: aborted command: "
 					"ASC: 0x%x, ASCQ: 0x%x\n",
 					cp, asc, ascq);
-				cmd->result = DID_SOFT_ERROR << 16;
+				cmd->result |= DID_SOFT_ERROR << 16;
 				break;
 			}
 			/* Must be some other type of check condition */

[PATCH 3.4 09/25] SCSI: hpsa: return 0 from driver probe function on success, not 1

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>

commit 88bf6d62db4393fa03a58bada9d746312d5b496f upstream.

A return value of 1 is interpreted as an error.  See pci_driver.
in local_pci_probe().  If you're wondering how this ever could
have worked, it's because it used to be the case that only return
values less than zero were interpreted as failure.  But even in
the current kernel if the driver registers its various entry
points with the kernel, and then returns a value which is
interpreted as failure, those registrations aren't undone, so
the driver still mostly works.  However, the driver's remove
function wouldn't be called on rmmod, and pci power management
functions wouldn't work.  In the case of Smart Array, since it
has a battery backed cache (or else no cache) even if the driver
is not shut down properly as long as there is no outstanding
i/o, nothing too bad happens, which is why it took so long to
notice.

Requesting backport to stable because the change to pci-driver.c
which requires driver probe functions to return 0 occurred between
2.6.35 and 2.6.36 (the pci power management breakage) and again
between 3.7 and 3.8 (pci_dev->driver getting set to NULL in
local_pci_probe() preventing driver remove function from being
called on rmmod.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/hpsa.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4466,7 +4466,7 @@ reinit_after_soft_reset:
 	hpsa_hba_inquiry(h);
 	hpsa_register_scsi(h);	/* hook ourselves into SCSI subsystem */
 	start_controller_lockup_detector(h);
-	return 1;
+	return 0;
 
 clean4:
 	hpsa_free_sg_chain_blocks(h);

[PATCH 3.4 10/25] net: smc91: fix crash regression on the versatile

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Walleij <linus.walleij@linaro.org>

commit a0c20fb02592d372e744d1d739cda3e1b3defaae upstream.

After commit e9e4ea74f06635f2ffc1dffe5ef40c854faa0a90
"net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data"
The Versatile SMSC LAN91C111 is crashing like this:

------------[ cut here ]------------
kernel BUG at /home/linus/linux/drivers/net/ethernet/smsc/smc91x.c:599!
Internal error: Oops - BUG: 0 [#1] ARM
Modules linked in:
CPU: 0 PID: 43 Comm: udhcpc Not tainted 3.13.0-rc1+ #24
task: c6ccfaa0 ti: c6cd0000 task.ti: c6cd0000
PC is at smc_hardware_send_pkt+0x198/0x22c
LR is at smc_hardware_send_pkt+0x24/0x22c
pc : [<c01be324>]    lr : [<c01be1b0>]    psr: 20000013
sp : c6cd1d08  ip : 00000001  fp : 00000000
r10: c02adb08  r9 : 00000000  r8 : c6ced802
r7 : c786fba0  r6 : 00000146  r5 : c8800000  r4 : c78d6000
r3 : 0000000f  r2 : 00000146  r1 : 00000000  r0 : 00000031
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0005317f  Table: 06cf4000  DAC: 00000015
Process udhcpc (pid: 43, stack limit = 0xc6cd01c0)
Stack: (0xc6cd1d08 to 0xc6cd2000)
1d00:                   00000010 c8800000 c78d6000 c786fba0 c78d6000 c01be868
1d20: c01be7a4 00004000 00000000 c786fba0 c6c12b80 c0208554 000004d0 c780fc60
1d40: 00000220 c01fb734 00000000 00000000 00000000 c6c9a440 c6c12b80 c78d6000
1d60: c786fba0 c6c9a440 00000000 c021d1d8 00000000 00000000 c6c12b80 c78d6000
1d80: c786fba0 00000001 c6c9a440 c02087f8 c6c9a4a0 00080008 00000000 00000000
1da0: c78d6000 c786fba0 c78d6000 00000138 00000000 00000000 00000000 00000000
1dc0: 00000000 c027ba74 00000138 00000138 00000001 00000010 c6cedc00 00000000
1de0: 00000008 c7404400 c6cd1eec c6cd1f14 c067a73c c065c0b8 00000000 c067a740
1e00: 01ffffff 002040d0 00000000 00000000 00000000 00000000 00000000 ffffffff
1e20: 43004400 00110022 c6cdef20 c027ae8c c6ccfaa0 be82d65c 00000014 be82d3cc
1e40: 00000000 00000000 00000000 c01f2870 00000000 00000000 00000000 c6cd1e88
1e60: c6ccfaa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1e80: 00000000 00000000 00000031 c7802310 c7802300 00000138 c7404400 c0771da0
1ea0: 00000000 c6cd1eec c7800340 00000138 be82d65c 00000014 be82d3cc c6cd1f08
1ec0: 00000014 00000000 c7404400 c7404400 00000138 c01f4628 c78d6000 00000000
1ee0: 00000000 be82d3cc 00000138 c6cd1f08 00000014 c6cd1ee4 00000001 00000000
1f00: 00000000 00000000 00080011 00000002 06000000 ffffffff 0000ffff 00000002
1f20: 06000000 ffffffff 0000ffff c00928c8 c065c520 c6cd1f58 00000003 c009299c
1f40: 00000003 c065c520 c7404400 00000000 c7404400 c01f2218 c78106b0 c7441cb0
1f60: 00000000 00000006 c06799fc 00000000 00000000 00000006 00000000 c01f3ee0
1f80: 00000000 00000000 be82d678 be82d65c 00000014 00000001 00000122 c00139c8
1fa0: c6cd0000 c0013840 be82d65c 00000014 00000006 be82d3cc 00000138 00000000
1fc0: be82d65c 00000014 00000001 00000122 00000000 00000000 00018cb1 00000000
1fe0: 00003801 be82d3a8 0003a0c7 b6e9af08 60000010 00000006 00000000 00000000
[<c01be324>] (smc_hardware_send_pkt+0x198/0x22c) from [<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8)
[<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8) from [<c0208554>] (dev_hard_start_xmit+0x460/0x4cc)
[<c0208554>] (dev_hard_start_xmit+0x460/0x4cc) from [<c021d1d8>] (sch_direct_xmit+0x94/0x18c)
[<c021d1d8>] (sch_direct_xmit+0x94/0x18c) from [<c02087f8>] (dev_queue_xmit+0x238/0x42c)
[<c02087f8>] (dev_queue_xmit+0x238/0x42c) from [<c027ba74>] (packet_sendmsg+0xbe8/0xd28)
[<c027ba74>] (packet_sendmsg+0xbe8/0xd28) from [<c01f2870>] (sock_sendmsg+0x84/0xa8)
[<c01f2870>] (sock_sendmsg+0x84/0xa8) from [<c01f4628>] (SyS_sendto+0xb8/0xdc)
[<c01f4628>] (SyS_sendto+0xb8/0xdc) from [<c0013840>] (ret_fast_syscall+0x0/0x2c)
Code: e3130002 1a000001 e3130001 0affffcd (e7f001f2)
---[ end trace 81104fe70e8da7fe ]---
Kernel panic - not syncing: Fatal exception in interrupt

This is because the macro operations in smc91x.h defined
for Versatile are missing SMC_outsw() as used in this
commit.

The Versatile needs and uses the same accessors as the other
platforms in the first if(...) clause, just switch it to using
that and we have one problem less to worry about.

This includes a hunk of a patch from Will Deacon fixin
the other 32bit platforms as well: Innokom, Ramses, PXA,
PCM027.

Checkpatch complains about spacing, but I have opted to
follow the style of this .h-file.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/smsc/smc91x.h |   22 ++++------------------
 1 file changed, 4 insertions(+), 18 deletions(-)

--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -46,7 +46,8 @@
     defined(CONFIG_MACH_LITTLETON) ||\
     defined(CONFIG_MACH_ZYLONITE2) ||\
     defined(CONFIG_ARCH_VIPER) ||\
-    defined(CONFIG_MACH_STARGATE2)
+    defined(CONFIG_MACH_STARGATE2) ||\
+    defined(CONFIG_ARCH_VERSATILE)
 
 #include <asm/mach-types.h>
 
@@ -154,6 +155,8 @@ static inline void SMC_outw(u16 val, voi
 #define SMC_outl(v, a, r)	writel(v, (a) + (r))
 #define SMC_insl(a, r, p, l)	readsl((a) + (r), p, l)
 #define SMC_outsl(a, r, p, l)	writesl((a) + (r), p, l)
+#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
+#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
 #define SMC_IRQ_FLAGS		(-1)	/* from resource */
 
 /* We actually can't write halfwords properly if not word aligned */
@@ -206,23 +209,6 @@ SMC_outw(u16 val, void __iomem *ioaddr,
 #define RPC_LSA_DEFAULT		RPC_LED_TX_RX
 #define RPC_LSB_DEFAULT		RPC_LED_100_10
 
-#elif	defined(CONFIG_ARCH_VERSATILE)
-
-#define SMC_CAN_USE_8BIT	1
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	1
-#define SMC_NOWAIT		1
-
-#define SMC_inb(a, r)		readb((a) + (r))
-#define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_inl(a, r)		readl((a) + (r))
-#define SMC_outb(v, a, r)	writeb(v, (a) + (r))
-#define SMC_outw(v, a, r)	writew(v, (a) + (r))
-#define SMC_outl(v, a, r)	writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l)	readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l)	writesl((a) + (r), p, l)
-#define SMC_IRQ_FLAGS		(-1)	/* from resource */
-
 #elif defined(CONFIG_MN10300)
 
 /*

[PATCH 3.4 11/25] NFSv4: Update list of irrecoverable errors on DELEGRETURN

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit c97cf606e43b85a6cf158b810375dd77312024db upstream.

If the DELEGRETURN errors out with something like NFS4ERR_BAD_STATEID
then there is no recovery possible. Just quit without returning an error.

Also, note that the client must not assume that the NFSv4 lease has been
renewed when it sees an error on DELEGRETURN.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -4041,11 +4041,17 @@ static void nfs4_delegreturn_done(struct
 		return;
 
 	switch (task->tk_status) {
-	case -NFS4ERR_STALE_STATEID:
-	case -NFS4ERR_EXPIRED:
 	case 0:
 		renew_lease(data->res.server, data->timestamp);
 		break;
+	case -NFS4ERR_ADMIN_REVOKED:
+	case -NFS4ERR_DELEG_REVOKED:
+	case -NFS4ERR_BAD_STATEID:
+	case -NFS4ERR_OLD_STATEID:
+	case -NFS4ERR_STALE_STATEID:
+	case -NFS4ERR_EXPIRED:
+		task->tk_status = 0;
+		break;
 	default:
 		if (nfs4_async_handle_error(task, data->res.server, NULL) ==
 				-EAGAIN) {

[PATCH 3.4 12/25] powerpc/gpio: Fix the wrong GPIO input data on MPC8572/MPC8536

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Gang <Gang.Liu@freescale.com>

commit 1aeef303b5d9e243c41d5b80f8bb059366514a10 upstream.

For MPC8572/MPC8536, the status of GPIOs defined as output
cannot be determined by reading GPDAT register, so the code
use shadow data register instead. But the code may give the
wrong status of GPIOs defined as input under some scenarios:

1. If some pins were configured as inputs and were asserted
high before booting the kernel, the shadow data has been
initialized with those pin values.
2. Some pins have been configured as output first and have
been set to the high value, then reconfigured as input.

The above cases will make the shadow data for those input
pins to be set to high. Then reading the pin status will
always return high even if the actual pin status is low.

The code should eliminate the effects of the shadow data to
the input pins, and the status of those pins should be
read directly from GPDAT.

Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpio-mpc8xxx.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -69,10 +69,14 @@ static int mpc8572_gpio_get(struct gpio_
 	u32 val;
 	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
 	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	u32 out_mask, out_shadow;
 
-	val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR);
+	out_mask = in_be32(mm->regs + GPIO_DIR);
 
-	return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio);
+	val = in_be32(mm->regs + GPIO_DAT) & ~out_mask;
+	out_shadow = mpc8xxx_gc->data & out_mask;
+
+	return (val | out_shadow) & mpc8xxx_gpio2mask(gpio);
 }
 
 static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)

[PATCH 3.4 13/25] irq: Enable all irqs unconditionally in irq_resume

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Laxman Dewangan <ldewangan@nvidia.com>

commit ac01810c9d2814238f08a227062e66a35a0e1ea2 upstream.

When the system enters suspend, it disables all interrupts in
suspend_device_irqs(), including the interrupts marked EARLY_RESUME.

On the resume side things are different. The EARLY_RESUME interrupts
are reenabled in sys_core_ops->resume and the non EARLY_RESUME
interrupts are reenabled in the normal system resume path.

When suspend_noirq() failed or suspend is aborted for any other
reason, we might omit the resume side call to sys_core_ops->resume()
and therefor the interrupts marked EARLY_RESUME are not reenabled and
stay disabled forever.

To solve this, enable all irqs unconditionally in irq_resume()
regardless whether interrupts marked EARLY_RESUMEhave been already
enabled or not.

This might try to reenable already enabled interrupts in the non
failure case, but the only affected platform is XEN and it has been
confirmed that it does not cause any side effects.

[ tglx: Massaged changelog. ]

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Cc: <ian.campbell@citrix.com>
Cc: <rjw@rjwysocki.net>
Cc: <len.brown@intel.com>
Cc: <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/1385388587-16442-1-git-send-email-ldewangan@nvidia.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/irq/pm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/irq/pm.c
+++ b/kernel/irq/pm.c
@@ -50,7 +50,7 @@ static void resume_irqs(bool want_early)
 		bool is_early = desc->action &&
 			desc->action->flags & IRQF_EARLY_RESUME;
 
-		if (is_early != want_early)
+		if (!is_early && want_early)
 			continue;
 
 		raw_spin_lock_irqsave(&desc->lock, flags);

[PATCH 3.4 14/25] net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shawn Landden <shawn@churchofgit.com>

commit d3f7d56a7a4671d395e8af87071068a195257bf6 upstream.

Commit 35f9c09fe (tcp: tcp_sendpages() should call tcp_push() once)
added an internal flag MSG_SENDPAGE_NOTLAST, similar to
MSG_MORE.

algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages()
and need to see the new flag as identical to MSG_MORE.

This fixes sendfile() on AF_ALG.

v3: also fix udp

Cc: Tom Herbert <therbert@google.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Reported-and-tested-by: Shawn Landden <shawnlandden@gmail.com>
Original-patch: Richard Weinberger <richard@nod.at>
Signed-off-by: Shawn Landden <shawn@churchofgit.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/algif_hash.c     |    3 +++
 crypto/algif_skcipher.c |    3 +++
 net/ipv4/udp.c          |    3 +++
 3 files changed, 9 insertions(+)

--- a/crypto/algif_hash.c
+++ b/crypto/algif_hash.c
@@ -117,6 +117,9 @@ static ssize_t hash_sendpage(struct sock
 	if (flags & MSG_SENDPAGE_NOTLAST)
 		flags |= MSG_MORE;
 
+	if (flags & MSG_SENDPAGE_NOTLAST)
+		flags |= MSG_MORE;
+
 	lock_sock(sk);
 	sg_init_table(ctx->sgl.sg, 1);
 	sg_set_page(ctx->sgl.sg, page, size, offset);
--- a/crypto/algif_skcipher.c
+++ b/crypto/algif_skcipher.c
@@ -381,6 +381,9 @@ static ssize_t skcipher_sendpage(struct
 	if (flags & MSG_SENDPAGE_NOTLAST)
 		flags |= MSG_MORE;
 
+	if (flags & MSG_SENDPAGE_NOTLAST)
+		flags |= MSG_MORE;
+
 	lock_sock(sk);
 	if (!ctx->more && ctx->used)
 		goto unlock;
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1042,6 +1042,9 @@ int udp_sendpage(struct sock *sk, struct
 	if (flags & MSG_SENDPAGE_NOTLAST)
 		flags |= MSG_MORE;
 
+	if (flags & MSG_SENDPAGE_NOTLAST)
+		flags |= MSG_MORE;
+
 	if (!up->pending) {
 		struct msghdr msg = {	.msg_flags = flags|MSG_MORE };
 

[PATCH 3.4 15/25] Input: allow deselecting serio drivers even without CONFIG_EXPERT

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tom Gundersen <teg@jklm.no>

commit bcd2623073e98f69f84720308db0b142c4da0bd6 upstream.

There is plenty of consumer hardware (e.g., mac books) that does not use AT
keyboards or PS/2 mice. It therefore makes sense for distro kernels to
build the related drivers as modules to avoid loading them on hardware that
does not need them. As such, these options should no longer be protected by
EXPERT.

Moreover, building these drivers as modules gets rid of the following ugly
error during boot:

[    2.337745] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.439537] i8042: No controller found

Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/keyboard/Kconfig |    4 ++--
 drivers/input/serio/Kconfig    |    6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -2,7 +2,7 @@
 # Input core configuration
 #
 menuconfig INPUT_KEYBOARD
-	bool "Keyboards" if EXPERT || !X86
+	bool "Keyboards"
 	default y
 	help
 	  Say Y here, and a list of supported keyboards will be displayed.
@@ -67,7 +67,7 @@ config KEYBOARD_ATARI
 	  module will be called atakbd.
 
 config KEYBOARD_ATKBD
-	tristate "AT keyboard" if EXPERT || !X86
+	tristate "AT keyboard"
 	default y
 	select SERIO
 	select SERIO_LIBPS2
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -2,7 +2,7 @@
 # Input core configuration
 #
 config SERIO
-	tristate "Serial I/O support" if EXPERT || !X86
+	tristate "Serial I/O support"
 	default y
 	help
 	  Say Yes here if you have any input device that uses serial I/O to
@@ -19,7 +19,7 @@ config SERIO
 if SERIO
 
 config SERIO_I8042
-	tristate "i8042 PC Keyboard controller" if EXPERT || !X86
+	tristate "i8042 PC Keyboard controller"
 	default y
 	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
 		   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN
@@ -168,7 +168,7 @@ config SERIO_MACEPS2
 	  module will be called maceps2.
 
 config SERIO_LIBPS2
-	tristate "PS/2 driver library" if EXPERT
+	tristate "PS/2 driver library"
 	depends on SERIO_I8042 || SERIO_I8042=n
 	help
 	  Say Y here if you are using a driver for device connected

[PATCH 3.4 16/25] Input: mousedev - allow disabling even without CONFIG_EXPERT

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tom Gundersen <teg@jklm.no>

commit dfaaed08ecc01bd513248ba7999daf50ce028352 upstream.

Moust (if not all) modern software, including X, uses /dev/eventX rather than
the legacy /dev/mouseX devices. It therefore makes sense for general-purpose
(distro) kernels to use MOUSEDV=m (or even n), so let's drop the EXPERT=y
requirement.

Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -71,7 +71,7 @@ config INPUT_SPARSEKMAP
 comment "Userland interfaces"
 
 config INPUT_MOUSEDEV
-	tristate "Mouse interface" if EXPERT
+	tristate "Mouse interface"
 	default y
 	help
 	  Say Y here if you want your mouse to be accessible as char devices

[PATCH 3.4 17/25] um: add missing declaration of getrlimit() and friends

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergei Trofimovich <slyfox@gentoo.org>

commit fdfa4c952844fce881df8c76de9c7180cbe913ab upstream.

arch/um/os-Linux/start_up.c: In function 'check_coredump_limit':
arch/um/os-Linux/start_up.c:338:16: error: storage size of 'lim' isn't known
arch/um/os-Linux/start_up.c:339:2: error: implicit declaration of function 'getrlimit' [-Werror=implicit-function-declaration]

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: Jeff Dike <jdike@addtoit.com>
CC: Richard Weinberger <richard@nod.at>
CC: Al Viro <viro@zeniv.linux.org.uk>
CC: user-mode-linux-devel@lists.sourceforge.net
CC: user-mode-linux-user@lists.sourceforge.net
CC: linux-kernel@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/um/os-Linux/start_up.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -15,6 +15,8 @@
 #include <sys/mman.h>
 #include <sys/stat.h>
 #include <sys/wait.h>
+#include <sys/time.h>
+#include <sys/resource.h>
 #include <asm/unistd.h>
 #include "init.h"
 #include "os.h"

[PATCH 3.4 18/25] ahci: Add Device IDs for Intel Lynx Point-LP PCH

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Ralston <james.d.ralston@intel.com>

commit 77b12bc9cf7b10c7c1a04ca45272fbb4287902d0 upstream.

This patch adds the AHCI-mode SATA Device IDs for the Intel Lynx Point-LP PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/ahci.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -268,6 +268,14 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0x8c07), board_ahci }, /* Lynx Point RAID */
 	{ PCI_VDEVICE(INTEL, 0x8c0e), board_ahci }, /* Lynx Point RAID */
 	{ PCI_VDEVICE(INTEL, 0x8c0f), board_ahci }, /* Lynx Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x9c02), board_ahci }, /* Lynx Point-LP AHCI */
+	{ PCI_VDEVICE(INTEL, 0x9c03), board_ahci }, /* Lynx Point-LP AHCI */
+	{ PCI_VDEVICE(INTEL, 0x9c04), board_ahci }, /* Lynx Point-LP RAID */
+	{ PCI_VDEVICE(INTEL, 0x9c05), board_ahci }, /* Lynx Point-LP RAID */
+	{ PCI_VDEVICE(INTEL, 0x9c06), board_ahci }, /* Lynx Point-LP RAID */
+	{ PCI_VDEVICE(INTEL, 0x9c07), board_ahci }, /* Lynx Point-LP RAID */
+	{ PCI_VDEVICE(INTEL, 0x9c0e), board_ahci }, /* Lynx Point-LP RAID */
+	{ PCI_VDEVICE(INTEL, 0x9c0f), board_ahci }, /* Lynx Point-LP RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,

[PATCH 3.4 19/25] ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seth Heasley <seth.heasley@intel.com>

commit 29e674dd5c8e781589f09c3ee139c80f6da274e4 upstream.

This patch adds the AHCI and RAID-mode SATA DeviceIDs for the Intel Avoton SOC.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/ahci.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -276,6 +276,22 @@ static const struct pci_device_id ahci_p
 	{ PCI_VDEVICE(INTEL, 0x9c07), board_ahci }, /* Lynx Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0x9c0e), board_ahci }, /* Lynx Point-LP RAID */
 	{ PCI_VDEVICE(INTEL, 0x9c0f), board_ahci }, /* Lynx Point-LP RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f22), board_ahci }, /* Avoton AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1f23), board_ahci }, /* Avoton AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1f24), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f25), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f26), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f27), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f2e), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f2f), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f32), board_ahci }, /* Avoton AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1f33), board_ahci }, /* Avoton AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1f34), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f35), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f36), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f37), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f3e), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x1f3f), board_ahci }, /* Avoton RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,

[PATCH 3.4 20/25] i2c: i801: SMBus patch for Intel Avoton DeviceIDs

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seth Heasley <seth.heasley@intel.com>

commit c2db409cbc8751ccc7e6d2cc2e41af0d12ea637f upstream.

This patch adds the PCU SMBus DeviceID for the Intel Avoton SOC.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: "Ong, Boon Leong" <boon.leong.ong@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/i2c/busses/i2c-i801 |    1 +
 drivers/i2c/busses/Kconfig        |    1 +
 drivers/i2c/busses/i2c-i801.c     |    3 +++
 3 files changed, 5 insertions(+)

--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -22,6 +22,7 @@ Supported adapters:
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
   * Intel Lynx Point-LP (PCH)
+  * Intel Avoton (SOC)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -105,6 +105,7 @@ config I2C_I801
 	    Panther Point (PCH)
 	    Lynx Point (PCH)
 	    Lynx Point-LP (PCH)
+	    Avoton (SOC)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -53,6 +53,7 @@
   Panther Point (PCH)   0x1e22     32     hard     yes     yes     yes
   Lynx Point (PCH)      0x8c22     32     hard     yes     yes     yes
   Lynx Point-LP (PCH)   0x9c22     32     hard     yes     yes     yes
+  Avoton (SOC)          0x1f3c     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -145,6 +146,7 @@
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1	0x1d71
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2	0x1d72
 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS	0x1e22
+#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS	0x1f3c
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
@@ -639,6 +641,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids)
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) },
 	{ 0, }
 };
 

[PATCH 3.4 21/25] USB: pl2303: fixed handling of CS5 setting

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Leitner <colin.leitner@googlemail.com>

commit a313249937820f8b1996133fc285efbd6aad2c5b upstream.

This patch fixes the CS5 setting on the PL2303 USB-to-serial devices. CS5 has a
value of 0 and the CSIZE setting has been skipped altogether by the enclosing
if. Tested on 3.11.6 and the scope shows the correct output after the fix has
been applied.

Tagged to be added to stable, because it fixes a user visible driver bug and is
simple enough to backport easily.

Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/pl2303.c |   32 +++++++++++++++-----------------
 1 file changed, 15 insertions(+), 17 deletions(-)

--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -290,24 +290,22 @@ static void pl2303_set_termios(struct tt
 	dbg("0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x", i,
 	    buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
 
-	if (cflag & CSIZE) {
-		switch (cflag & CSIZE) {
-		case CS5:
-			buf[6] = 5;
-			break;
-		case CS6:
-			buf[6] = 6;
-			break;
-		case CS7:
-			buf[6] = 7;
-			break;
-		default:
-		case CS8:
-			buf[6] = 8;
-			break;
-		}
-		dbg("%s - data bits = %d", __func__, buf[6]);
+	switch (cflag & CSIZE) {
+	case CS5:
+		buf[6] = 5;
+		break;
+	case CS6:
+		buf[6] = 6;
+		break;
+	case CS7:
+		buf[6] = 7;
+		break;
+	default:
+	case CS8:
+		buf[6] = 8;
+		break;
 	}
+	dbg("%s - data bits = %d", __func__, buf[6]);
 
 	/* For reference buf[0]:buf[3] baud rate value */
 	/* NOTE: Only the values defined in baud_sup are supported !

[PATCH 3.4 22/25] USB: mos7840: correct handling of CS5 setting

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Leitner <colin.leitner@googlemail.com>

commit 78692cc3382e0603a47e1f2aaeffe0d99891994d upstream.

This patch removes an erroneous check of CSIZE, which made it impossible to set
CS5.

Compiles clean, but couldn't test against hardware.

Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/mos7840.c |   32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1962,25 +1962,25 @@ static void mos7840_change_port_settings
 	iflag = tty->termios->c_iflag;
 
 	/* Change the number of bits */
-	if (cflag & CSIZE) {
-		switch (cflag & CSIZE) {
-		case CS5:
-			lData = LCR_BITS_5;
-			break;
+	switch (cflag & CSIZE) {
+	case CS5:
+		lData = LCR_BITS_5;
+		break;
 
-		case CS6:
-			lData = LCR_BITS_6;
-			break;
+	case CS6:
+		lData = LCR_BITS_6;
+		break;
 
-		case CS7:
-			lData = LCR_BITS_7;
-			break;
-		default:
-		case CS8:
-			lData = LCR_BITS_8;
-			break;
-		}
+	case CS7:
+		lData = LCR_BITS_7;
+		break;
+
+	default:
+	case CS8:
+		lData = LCR_BITS_8;
+		break;
 	}
+
 	/* Change the Parity bit */
 	if (cflag & PARENB) {
 		if (cflag & PARODD) {

[PATCH 3.4 23/25] USB: spcp8x5: correct handling of CS5 setting

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Leitner <colin.leitner@googlemail.com>

commit 711fbdfbf2bc4827214a650afe3f64767a1aba16 upstream.

This patch removes an erroneous check of CSIZE, which made it impossible to set
CS5.

Compiles clean, but couldn't test against hardware.

Signed-off-by: Colin Leitner <colin.leitner@gmail.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/spcp8x5.c |   30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -396,22 +396,20 @@ static void spcp8x5_set_termios(struct t
 	}
 
 	/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
-	if (cflag & CSIZE) {
-		switch (cflag & CSIZE) {
-		case CS5:
-			buf[1] |= SET_UART_FORMAT_SIZE_5;
-			break;
-		case CS6:
-			buf[1] |= SET_UART_FORMAT_SIZE_6;
-			break;
-		case CS7:
-			buf[1] |= SET_UART_FORMAT_SIZE_7;
-			break;
-		default:
-		case CS8:
-			buf[1] |= SET_UART_FORMAT_SIZE_8;
-			break;
-		}
+	switch (cflag & CSIZE) {
+	case CS5:
+		buf[1] |= SET_UART_FORMAT_SIZE_5;
+		break;
+	case CS6:
+		buf[1] |= SET_UART_FORMAT_SIZE_6;
+		break;
+	case CS7:
+		buf[1] |= SET_UART_FORMAT_SIZE_7;
+		break;
+	default:
+	case CS8:
+		buf[1] |= SET_UART_FORMAT_SIZE_8;
+		break;
 	}
 
 	/* Set Stop bit2 : 0:1bit 1:2bit */

[PATCH 3.4 24/25] USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Cluytens <david.cluytens@gmail.com>

commit 3b59d16c513da258ec8f6a0b4db85f257a0380d6 upstream.

Signed-off-by: David Cluytens <david.cluytens@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1542,6 +1542,8 @@ static int acm_reset_resume(struct usb_i
 
 static const struct usb_device_id acm_ids[] = {
 	/* quirky and broken devices */
+	{ USB_DEVICE(0x17ef, 0x7000), /* Lenovo USB modem */
+	.driver_info = NO_UNION_NORMAL, },/* has no union descriptor */
 	{ USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},

[PATCH 3.4 25/25] drivers/char/i8k.c: add Dell XPLS L421X

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Cox <alan@linux.intel.com>

commit 9aa5b0181bdf335f0b731d8502e128a862884bcd upstream.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=60772

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Leho Kraav <leho@kraav.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/i8k.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -664,6 +664,13 @@ static struct dmi_system_id __initdata i
 			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro"),
 		},
 	},
+	{
+		.ident = "Dell XPS421",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS L421X"),
+		},
+	},
         { }
 };
 

Re: [PATCH 3.4 00/25] 3.4.74-stable review

[Guenter Roeck]

On Tue, Dec 10, 2013 at 12:00:08AM -0800, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.4.74 release.
> There are 25 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Dec 12 07:59:15 UTC 2013.
> Anything received after that time might be too late.
> 
Build results:
	total: 103 pass: 89 skipped: 10 fail: 4

qemu tests all passed.

Results are as expected.
Details are available as usual at http://server.roeck-us.net:8010/builders.

Guenter

Re: [PATCH 3.4 00/25] 3.4.74-stable review

[Greg Kroah-Hartman]

On Tue, Dec 10, 2013 at 09:01:09AM -0800, Guenter Roeck wrote:
> On Tue, Dec 10, 2013 at 12:00:08AM -0800, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.4.74 release.
> > There are 25 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Thu Dec 12 07:59:15 UTC 2013.
> > Anything received after that time might be too late.
> > 
> Build results:
> 	total: 103 pass: 89 skipped: 10 fail: 4
> 
> qemu tests all passed.
> 
> Results are as expected.
> Details are available as usual at http://server.roeck-us.net:8010/builders.

Thanks for the results,

greg k-h

Re: [PATCH 3.4 00/25] 3.4.74-stable review

[Shuah Khan]

On 12/10/2013 01:00 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.4.74 release.
> There are 25 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Dec 12 07:59:15 UTC 2013.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.74-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Patch applied cleanly
Compile testing - passed
Boot testing - passed
dmesg regression testing - passed

dmesgs look good. No regressions compared to the previous dmesgs for 
this release. dmesg emerg, crit, alert, err are clean. No regressions in 
warn.

Test systems

     Samsung Series 9 900X4C Intel Corei5 (3.4 and later)
     HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics
     Dell OptiPlex 790 Intel(R) Core(TM) i5-2400

-- Shuah

-- 
Shuah Khan
Senior Linux Kernel Developer - Open Source Group
Samsung Research America(Silicon Valley)
shuah.kh@samsung.com | (970) 672-0658

Re: [PATCH 3.4 00/25] 3.4.74-stable review

[Satoru Takeuchi]

At Tue, 10 Dec 2013 00:00:08 -0800,
Greg Kroah-Hartman wrote:
> 
> This is the start of the stable review cycle for the 3.4.74 release.
> There are 25 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Dec 12 07:59:15 UTC 2013.
> Anything received after that time might be too late.

This kernel can be built and boot without any problem.
Building a kernel with this kernel also works fine.

 - test tool:
   https://github.com/satoru-takeuchi/test-linux-stable

 - test results(kernel .config, ktest config and test log):
   http://satoru-takeuchi.org/test-linux-stable/results/3.4.74-rc1-2013-12-11_23:52:06+09:00

 - Build Machine: debian jessy x86_64
   CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz x 4
   memory: 8GB

 - Test machine: debian jessy x86_64(KVM guest on the Build Machine)
   vCPU: x2
   memory: 2GB

I reviewed the following patches and it looks good to me.

> Tom Gundersen <teg@jklm.no>
>     Input: mousedev - allow disabling even without CONFIG_EXPERT
> 
> Tom Gundersen <teg@jklm.no>
>     Input: allow deselecting serio drivers even without CONFIG_EXPERT

Thanks,
Satoru