From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Marc Kleine-Budde Subject: [PATCH 3.12 28/62] can: flexcan: use correct clock as base for bit rate calculation Date: Tue, 10 Dec 2013 00:00:59 -0800 Message-Id: <20131210080059.417469585@linuxfoundation.org> In-Reply-To: <20131210080057.415644748@linuxfoundation.org> References: <20131210080057.415644748@linuxfoundation.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: 3.12-stable review patch. If anyone has any objections, please let me know. ------------------ From: Marc Kleine-Budde commit 1a3e5173f5e72cbf7f0c8927b33082e361c16d72 upstream. The flexcan IP core uses the peripheral clock ("per") as basic clock for the bit timing calculation. However the driver uses the the wrong clock ("ipg"). This leads to wrong bit rates if the rates on both clock are different. This patch fixes the problem by using the correct clock for the bit rate calculation. Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/flexcan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1020,13 +1020,13 @@ static int flexcan_probe(struct platform dev_err(&pdev->dev, "no ipg clock defined\n"); return PTR_ERR(clk_ipg); } - clock_freq = clk_get_rate(clk_ipg); clk_per = devm_clk_get(&pdev->dev, "per"); if (IS_ERR(clk_per)) { dev_err(&pdev->dev, "no per clock defined\n"); return PTR_ERR(clk_per); } + clock_freq = clk_get_rate(clk_per); } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);