From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Heikki Krogerus , Felipe Balbi Subject: [PATCH 3.13 016/140] usb: dwc3: fix the glue drivers using the nop phy Date: Tue, 4 Feb 2014 13:10:03 -0800 Message-Id: <20140204211037.430296131@linuxfoundation.org> In-Reply-To: <20140204211036.967663852@linuxfoundation.org> References: <20140204211036.967663852@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: 3.13-stable review patch. If anyone has any objections, please let me know. ------------------ From: Heikki Krogerus commit 13518673f1419f2667985a6fca4543e44143408b upstream. The reset_gpio member of the usb_phy_gen_xceiv_platform_data structure needs the have negative value or phy-generic's probe will fail unless DT is used. 0 is a valid gpio number. This fixes an issue where phy-generic fails to probe with message: "usb_phy_gen_xceiv.0: Error requesting RESET GPIO 0". Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-exynos.c | 1 + drivers/usb/dwc3/dwc3-pci.c | 1 + 2 files changed, 2 insertions(+) --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -50,6 +50,7 @@ static int dwc3_exynos_register_phys(str exynos->usb2_phy = pdev; pdata.type = USB_PHY_TYPE_USB2; + pdata.gpio_reset = -1; ret = platform_device_add_data(exynos->usb2_phy, &pdata, sizeof(pdata)); if (ret) --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -52,6 +52,7 @@ static int dwc3_pci_register_phys(struct glue->usb2_phy = pdev; pdata.type = USB_PHY_TYPE_USB2; + pdata.gpio_reset = -1; ret = platform_device_add_data(glue->usb2_phy, &pdata, sizeof(pdata)); if (ret)