[PATCH 3.12 033/107] ore: Fix wrong math in allocation of per device BIO

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boaz Harrosh <bharrosh@panasas.com>

commit aad560b7f63b495f48a7232fd086c5913a676e6f upstream.

At IO preparation we calculate the max pages at each device and
allocate a BIO per device of that size. The calculation was wrong
on some unaligned corner cases offset/length combination and would
make prepare return with -ENOMEM. This would be bad for pnfs-objects
that would in that case IO through MDS. And fatal for exofs were it
would fail writes with EIO.

Fix it by doing the proper math, that will work in all cases. (I
ran a test with all possible offset/length combinations this time
round).

Also when reading we do not need to allocate for the parity units
since we jump over them.

Also lower the max_io_length to take into account the parity pages
so not to allocate BIOs bigger than PAGE_SIZE

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/exofs/ore.c         |   37 +++++++++++++++++++++++++------------
 include/scsi/osd_ore.h |    1 +
 2 files changed, 26 insertions(+), 12 deletions(-)

--- a/fs/exofs/ore.c
+++ b/fs/exofs/ore.c
@@ -103,7 +103,7 @@ int ore_verify_layout(unsigned total_com
 
 	layout->max_io_length =
 		(BIO_MAX_PAGES_KMALLOC * PAGE_SIZE - layout->stripe_unit) *
-							layout->group_width;
+					(layout->group_width - layout->parity);
 	if (layout->parity) {
 		unsigned stripe_length =
 				(layout->group_width - layout->parity) *
@@ -286,7 +286,8 @@ int  ore_get_rw_state(struct ore_layout
 	if (length) {
 		ore_calc_stripe_info(layout, offset, length, &ios->si);
 		ios->length = ios->si.length;
-		ios->nr_pages = (ios->length + PAGE_SIZE - 1) / PAGE_SIZE;
+		ios->nr_pages = ((ios->offset & (PAGE_SIZE - 1)) +
+				 ios->length + PAGE_SIZE - 1) / PAGE_SIZE;
 		if (layout->parity)
 			_ore_post_alloc_raid_stuff(ios);
 	}
@@ -536,6 +537,7 @@ void ore_calc_stripe_info(struct ore_lay
 	u64	H = LmodS - G * T;
 
 	u32	N = div_u64(H, U);
+	u32	Nlast;
 
 	/* "H - (N * U)" is just "H % U" so it's bound to u32 */
 	u32	C = (u32)(H - (N * U)) / stripe_unit + G * group_width;
@@ -568,6 +570,10 @@ void ore_calc_stripe_info(struct ore_lay
 	si->length = T - H;
 	if (si->length > length)
 		si->length = length;
+
+	Nlast = div_u64(H + si->length + U - 1, U);
+	si->maxdevUnits = Nlast - N;
+
 	si->M = M;
 }
 EXPORT_SYMBOL(ore_calc_stripe_info);
@@ -583,13 +589,16 @@ int _ore_add_stripe_unit(struct ore_io_s
 	int ret;
 
 	if (per_dev->bio == NULL) {
-		unsigned pages_in_stripe = ios->layout->group_width *
-					(ios->layout->stripe_unit / PAGE_SIZE);
-		unsigned nr_pages = ios->nr_pages * ios->layout->group_width /
-					(ios->layout->group_width -
-					 ios->layout->parity);
-		unsigned bio_size = (nr_pages + pages_in_stripe) /
-					ios->layout->group_width;
+		unsigned bio_size;
+
+		if (!ios->reading) {
+			bio_size = ios->si.maxdevUnits;
+		} else {
+			bio_size = (ios->si.maxdevUnits + 1) *
+			     (ios->layout->group_width - ios->layout->parity) /
+			     ios->layout->group_width;
+		}
+		bio_size *= (ios->layout->stripe_unit / PAGE_SIZE);
 
 		per_dev->bio = bio_kmalloc(GFP_KERNEL, bio_size);
 		if (unlikely(!per_dev->bio)) {
@@ -609,8 +618,12 @@ int _ore_add_stripe_unit(struct ore_io_s
 		added_len = bio_add_pc_page(q, per_dev->bio, pages[pg],
 					    pglen, pgbase);
 		if (unlikely(pglen != added_len)) {
-			ORE_DBGMSG("Failed bio_add_pc_page bi_vcnt=%u\n",
-				   per_dev->bio->bi_vcnt);
+			/* If bi_vcnt == bi_max then this is a SW BUG */
+			ORE_DBGMSG("Failed bio_add_pc_page bi_vcnt=0x%x "
+				   "bi_max=0x%x BIO_MAX=0x%x cur_len=0x%x\n",
+				   per_dev->bio->bi_vcnt,
+				   per_dev->bio->bi_max_vecs,
+				   BIO_MAX_PAGES_KMALLOC, cur_len);
 			ret = -ENOMEM;
 			goto out;
 		}
@@ -1098,7 +1111,7 @@ int ore_truncate(struct ore_layout *layo
 		size_attr->attr = g_attr_logical_length;
 		size_attr->attr.val_ptr = &size_attr->newsize;
 
-		ORE_DBGMSG("trunc(0x%llx) obj_offset=0x%llx dev=%d\n",
+		ORE_DBGMSG2("trunc(0x%llx) obj_offset=0x%llx dev=%d\n",
 			     _LLU(oc->comps->obj.id), _LLU(obj_size), i);
 		ret = _truncate_mirrors(ios, i * ios->layout->mirrors_p1,
 					&size_attr->attr);
--- a/include/scsi/osd_ore.h
+++ b/include/scsi/osd_ore.h
@@ -102,6 +102,7 @@ struct ore_striping_info {
 	unsigned unit_off;
 	unsigned cur_pg;
 	unsigned cur_comp;
+	unsigned maxdevUnits;
 };
 
 struct ore_io_state;