From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Bjorn Helgaas , Sarah Sharp Subject: [PATCH 3.13 117/149] PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled Date: Thu, 20 Mar 2014 17:04:40 -0700 Message-Id: <20140321000441.011786716@linuxfoundation.org> In-Reply-To: <20140321000436.377902063@linuxfoundation.org> References: <20140321000436.377902063@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: 3.13-stable review patch. If anyone has any objections, please let me know. ------------------ From: Bjorn Helgaas commit 3cdeb713dc66057b50682048c151eae07b186c42 upstream. Andreas reported that after 1f42db786b14 ("PCI: Enable INTx if BIOS left them disabled"), pciehp surprise removal stopped working. This happens because pci_reenable_device() on the hotplug bridge (used in the pciehp_configure_device() path) clears the Interrupt Disable bit, which apparently breaks the bridge's MSI hotplug event reporting. Previously we cleared the Interrupt Disable bit in do_pci_enable_device(), which is used by both pci_enable_device() and pci_reenable_device(). But we use pci_reenable_device() after the driver may have enabled MSI or MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X. This patch clears Interrupt Disable only when MSI/MSI-X has not been enabled. Fixes: 1f42db786b14 PCI: Enable INTx if BIOS left them disabled Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691 Reported-and-tested-by: Andreas Noever Signed-off-by: Bjorn Helgaas CC: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/pci/pci.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1131,6 +1131,9 @@ static int do_pci_enable_device(struct p return err; pci_fixup_device(pci_fixup_enable, dev); + if (dev->msi_enabled || dev->msix_enabled) + return 0; + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); if (pin) { pci_read_config_word(dev, PCI_COMMAND, &cmd);