From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
"H. Peter Anvin" <hpa@linux.intel.com>,
Herbert Xu <herbert@gondor.apana.org.au>
Subject: [PATCH 3.10 39/41] crypto: ghash-clmulni-intel - use C implementation for setkey()
Date: Fri, 11 Apr 2014 09:10:10 -0700 [thread overview]
Message-ID: <20140411160935.713476714@linuxfoundation.org> (raw)
In-Reply-To: <20140411160932.865173041@linuxfoundation.org>
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
commit 8ceee72808d1ae3fb191284afc2257a2be964725 upstream.
The GHASH setkey() function uses SSE registers but fails to call
kernel_fpu_begin()/kernel_fpu_end(). Instead of adding these calls, and
then having to deal with the restriction that they cannot be called from
interrupt context, move the setkey() implementation to the C domain.
Note that setkey() does not use any particular SSE features and is not
expected to become a performance bottleneck.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Fixes: 0e1227d356e9b (crypto: ghash - Add PCLMULQDQ accelerated implementation)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/crypto/ghash-clmulni-intel_asm.S | 29 -----------------------------
arch/x86/crypto/ghash-clmulni-intel_glue.c | 14 +++++++++++---
2 files changed, 11 insertions(+), 32 deletions(-)
--- a/arch/x86/crypto/ghash-clmulni-intel_asm.S
+++ b/arch/x86/crypto/ghash-clmulni-intel_asm.S
@@ -24,10 +24,6 @@
.align 16
.Lbswap_mask:
.octa 0x000102030405060708090a0b0c0d0e0f
-.Lpoly:
- .octa 0xc2000000000000000000000000000001
-.Ltwo_one:
- .octa 0x00000001000000000000000000000001
#define DATA %xmm0
#define SHASH %xmm1
@@ -134,28 +130,3 @@ ENTRY(clmul_ghash_update)
.Lupdate_just_ret:
ret
ENDPROC(clmul_ghash_update)
-
-/*
- * void clmul_ghash_setkey(be128 *shash, const u8 *key);
- *
- * Calculate hash_key << 1 mod poly
- */
-ENTRY(clmul_ghash_setkey)
- movaps .Lbswap_mask, BSWAP
- movups (%rsi), %xmm0
- PSHUFB_XMM BSWAP %xmm0
- movaps %xmm0, %xmm1
- psllq $1, %xmm0
- psrlq $63, %xmm1
- movaps %xmm1, %xmm2
- pslldq $8, %xmm1
- psrldq $8, %xmm2
- por %xmm1, %xmm0
- # reduction
- pshufd $0b00100100, %xmm2, %xmm1
- pcmpeqd .Ltwo_one, %xmm1
- pand .Lpoly, %xmm1
- pxor %xmm1, %xmm0
- movups %xmm0, (%rdi)
- ret
-ENDPROC(clmul_ghash_setkey)
--- a/arch/x86/crypto/ghash-clmulni-intel_glue.c
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -30,8 +30,6 @@ void clmul_ghash_mul(char *dst, const be
void clmul_ghash_update(char *dst, const char *src, unsigned int srclen,
const be128 *shash);
-void clmul_ghash_setkey(be128 *shash, const u8 *key);
-
struct ghash_async_ctx {
struct cryptd_ahash *cryptd_tfm;
};
@@ -58,13 +56,23 @@ static int ghash_setkey(struct crypto_sh
const u8 *key, unsigned int keylen)
{
struct ghash_ctx *ctx = crypto_shash_ctx(tfm);
+ be128 *x = (be128 *)key;
+ u64 a, b;
if (keylen != GHASH_BLOCK_SIZE) {
crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
return -EINVAL;
}
- clmul_ghash_setkey(&ctx->shash, key);
+ /* perform multiplication by 'x' in GF(2^128) */
+ a = be64_to_cpu(x->a);
+ b = be64_to_cpu(x->b);
+
+ ctx->shash.a = (__be64)((b << 1) | (a >> 63));
+ ctx->shash.b = (__be64)((a << 1) | (b >> 63));
+
+ if (a >> 63)
+ ctx->shash.b ^= cpu_to_be64(0xc2);
return 0;
}
next prev parent reply other threads:[~2014-04-11 16:10 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-11 16:09 [PATCH 3.10 00/41] 3.10.37-stable review Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 01/41] selinux: correctly label /proc inodes in use before the policy is loaded Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 02/41] powernow-k6: disable cache when changing frequency Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 03/41] powernow-k6: correctly initialize default parameters Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 04/41] powernow-k6: reorder frequencies Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 05/41] kbuild: fix make headers_install when path is too long Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 06/41] cpuidle: Check the result of cpuidle_get_driver() against NULL Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 07/41] net: fix for a race condition in the inet frag code Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 08/41] net: sctp: fix skb leakage in COOKIE ECHO path of chunk->auth_chunk Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 09/41] bridge: multicast: add sanity check for query source addresses Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 10/41] inet: frag: make sure forced eviction removes all frags Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 11/41] net: unix: non blocking recvmsg() should not return -EINTR Greg Kroah-Hartman
2014-04-11 16:21 ` Rainer Weikusat
2014-04-11 16:09 ` [PATCH 3.10 12/41] ipv6: Fix exthdrs offload registration Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 13/41] ipv6: dont set DST_NOCOUNT for remotely added routes Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 14/41] vlan: Set correct source MAC address with TX VLAN offload enabled Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 15/41] tcp: tcp_release_cb() should release socket ownership Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 16/41] net: socket: error on a negative msg_namelen Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 17/41] ipv6: Avoid unnecessary temporary addresses being generated Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 18/41] ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properly Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 19/41] vxlan: fix potential NULL dereference in arp_reduce() Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 20/41] rtnetlink: fix fdb notification flags Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 21/41] ipmr: fix mfc " Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 22/41] ip6mr: " Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 23/41] netpoll: fix the skb check in pkt_is_ns Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 24/41] tg3: Do not include vlan acceleration features in vlan_features Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 25/41] usbnet: include wait queue head in device structure Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 26/41] vlan: Set hard_header_len according to available acceleration Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 27/41] vhost: fix total length when packets are too short Greg Kroah-Hartman
2014-04-11 16:09 ` [PATCH 3.10 28/41] vhost: validate vhost_get_vq_desc return value Greg Kroah-Hartman
2014-04-11 16:10 ` [PATCH 3.10 29/41] xen-netback: remove pointless clause from if statement Greg Kroah-Hartman
2014-04-11 16:10 ` [PATCH 3.10 30/41] ipv6: some ipv6 statistic counters failed to disable bh Greg Kroah-Hartman
2014-04-11 16:10 ` [PATCH 3.10 31/41] netlink: dont compare the nul-termination in nla_strcmp Greg Kroah-Hartman
2014-04-11 16:10 ` [PATCH 3.10 32/41] isdnloop: Validate NUL-terminated strings from user Greg Kroah-Hartman
2014-04-11 16:10 ` [PATCH 3.10 33/41] isdnloop: several buffer overflows Greg Kroah-Hartman
2014-04-11 16:10 ` [PATCH 3.10 34/41] rds: prevent dereference of a NULL device in rds_iw_laddr_check Greg Kroah-Hartman
2014-04-11 16:10 ` [PATCH 3.10 35/41] ARC: [nsimosci] Change .dts to use generic 8250 UART Greg Kroah-Hartman
2014-04-11 16:10 ` [PATCH 3.10 36/41] ARC: [nsimosci] Unbork console Greg Kroah-Hartman
2014-04-11 16:10 ` [PATCH 3.10 37/41] futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test Greg Kroah-Hartman
2014-04-11 16:10 ` [PATCH 3.10 38/41] m68k: Skip " Greg Kroah-Hartman
2014-04-11 16:10 ` Greg Kroah-Hartman [this message]
2014-04-11 16:10 ` [PATCH 3.10 40/41] cpufreq: Fix governor start/stop race condition Greg Kroah-Hartman
2014-04-11 16:10 ` [PATCH 3.10 41/41] cpufreq: Fix timer/workqueue corruption due to double queueing Greg Kroah-Hartman
2014-04-11 21:44 ` [PATCH 3.10 00/41] 3.10.37-stable review Guenter Roeck
2014-04-11 23:45 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140411160935.713476714@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=ard.biesheuvel@linaro.org \
--cc=herbert@gondor.apana.org.au \
--cc=hpa@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).