From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Ivan <athlon_@mail.ru>,
Peter Hurley <peter@hurleysoftware.com>
Subject: [PATCH 3.14 80/94] serial: Fix IGNBRK handling
Date: Mon, 7 Jul 2014 16:58:10 -0700 [thread overview]
Message-ID: <20140707235759.136530525@linuxfoundation.org> (raw)
In-Reply-To: <20140707235756.780319003@linuxfoundation.org>
3.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Hurley <peter@hurleysoftware.com>
commit ef8b9ddcb45fa3b1e11acd72be2398001e807d14 upstream.
If IGNBRK is set without either BRKINT or PARMRK set, some uart
drivers send a 0x00 byte for BREAK without the TTYBREAK flag to the
line discipline, when it should send either nothing or the TTYBREAK flag
set. This happens because the read_status_mask masks out the BI
condition, which uart_insert_char() then interprets as a normal 0x00 byte.
SUS v3 is clear regarding the meaning of IGNBRK; Section 11.2.2, General
Terminal Interface - Input Modes, states:
"If IGNBRK is set, a break condition detected on input shall be ignored;
that is, not put on the input queue and therefore not read by any
process."
Fix read_status_mask to include the BI bit if IGNBRK is set; the
lsr status retains the BI bit if a BREAK is recv'd, which is
subsequently ignored in uart_insert_char() when masked with the
ignore_status_mask.
Affected drivers:
8250 - all
serial_txx9
mfd
amba-pl010
amba-pl011
atmel_serial
bfin_uart
dz
ip22zilog
max310x
mxs-auart
netx-serial
pnx8xxx_uart
pxa
sb1250-duart
sccnxp
serial_ks8695
sirfsoc_uart
st-asc
vr41xx_siu
zs
sunzilog
fsl_lpuart
sunsab
ucc_uart
bcm63xx_uart
sunsu
efm32-uart
pmac_zilog
mpsc
msm_serial
m32r_sio
Unaffected drivers:
omap-serial
rp2
sa1100
imx
icom
Annotated for fixes:
altera_uart
mcf
Drivers without break detection:
21285
xilinx-uartps
altera_jtaguart
apbuart
arc-uart
clps711x
max3100
uartlite
msm_serial_hs
nwpserial
lantiq
vt8500_serial
Unknown:
samsung
mpc52xx_uart
bfin_sport_uart
cpm_uart/core
Fixes: Bugzilla #71651, '8250_core.c incorrectly handles IGNBRK flag'
Reported-by: Ivan <athlon_@mail.ru>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/8250/8250_core.c | 2 +-
drivers/tty/serial/altera_uart.c | 6 ++++++
drivers/tty/serial/amba-pl010.c | 2 +-
drivers/tty/serial/amba-pl011.c | 2 +-
drivers/tty/serial/atmel_serial.c | 2 +-
drivers/tty/serial/bcm63xx_uart.c | 2 +-
drivers/tty/serial/bfin_uart.c | 2 +-
drivers/tty/serial/dz.c | 2 +-
drivers/tty/serial/efm32-uart.c | 2 +-
drivers/tty/serial/fsl_lpuart.c | 2 +-
drivers/tty/serial/ip22zilog.c | 2 +-
drivers/tty/serial/m32r_sio.c | 2 +-
drivers/tty/serial/max310x.c | 2 +-
drivers/tty/serial/mcf.c | 6 ++++++
drivers/tty/serial/mfd.c | 2 +-
drivers/tty/serial/mpsc.c | 2 +-
drivers/tty/serial/msm_serial.c | 2 +-
drivers/tty/serial/mxs-auart.c | 2 +-
drivers/tty/serial/netx-serial.c | 2 +-
drivers/tty/serial/pmac_zilog.c | 2 +-
drivers/tty/serial/pnx8xxx_uart.c | 2 +-
drivers/tty/serial/pxa.c | 2 +-
drivers/tty/serial/sb1250-duart.c | 2 +-
drivers/tty/serial/sccnxp.c | 2 +-
drivers/tty/serial/serial_ks8695.c | 2 +-
drivers/tty/serial/serial_txx9.c | 2 +-
drivers/tty/serial/sirfsoc_uart.c | 2 +-
drivers/tty/serial/st-asc.c | 2 +-
drivers/tty/serial/sunsab.c | 2 +-
drivers/tty/serial/sunsu.c | 2 +-
drivers/tty/serial/sunzilog.c | 2 +-
drivers/tty/serial/ucc_uart.c | 2 +-
drivers/tty/serial/vr41xx_siu.c | 2 +-
drivers/tty/serial/zs.c | 2 +-
34 files changed, 44 insertions(+), 32 deletions(-)
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2356,7 +2356,7 @@ serial8250_do_set_termios(struct uart_po
port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
if (termios->c_iflag & INPCK)
port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= UART_LSR_BI;
/*
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -185,6 +185,12 @@ static void altera_uart_set_termios(stru
uart_update_timeout(port, termios->c_cflag, baud);
altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG);
spin_unlock_irqrestore(&port->lock, flags);
+
+ /*
+ * FIXME: port->read_status_mask and port->ignore_status_mask
+ * need to be initialized based on termios settings for
+ * INPCK, IGNBRK, IGNPAR, PARMRK, BRKINT
+ */
}
static void altera_uart_rx_chars(struct altera_uart *pp)
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -420,7 +420,7 @@ pl010_set_termios(struct uart_port *port
uap->port.read_status_mask = UART01x_RSR_OE;
if (termios->c_iflag & INPCK)
uap->port.read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
uap->port.read_status_mask |= UART01x_RSR_BE;
/*
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1744,7 +1744,7 @@ pl011_set_termios(struct uart_port *port
port->read_status_mask = UART011_DR_OE | 255;
if (termios->c_iflag & INPCK)
port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= UART011_DR_BE;
/*
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1811,7 +1811,7 @@ static void atmel_set_termios(struct uar
port->read_status_mask = ATMEL_US_OVRE;
if (termios->c_iflag & INPCK)
port->read_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE);
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= ATMEL_US_RXBRK;
if (atmel_use_pdc_rx(port))
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -565,7 +565,7 @@ static void bcm_uart_set_termios(struct
port->read_status_mask |= UART_FIFO_FRAMEERR_MASK;
port->read_status_mask |= UART_FIFO_PARERR_MASK;
}
- if (new->c_iflag & (BRKINT))
+ if (new->c_iflag & (IGNBRK | BRKINT))
port->read_status_mask |= UART_FIFO_BRKDET_MASK;
port->ignore_status_mask = 0;
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -833,7 +833,7 @@ bfin_serial_set_termios(struct uart_port
port->read_status_mask = OE;
if (termios->c_iflag & INPCK)
port->read_status_mask |= (FE | PE);
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= BI;
/*
--- a/drivers/tty/serial/dz.c
+++ b/drivers/tty/serial/dz.c
@@ -625,7 +625,7 @@ static void dz_set_termios(struct uart_p
dport->port.read_status_mask = DZ_OERR;
if (termios->c_iflag & INPCK)
dport->port.read_status_mask |= DZ_FERR | DZ_PERR;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
dport->port.read_status_mask |= DZ_BREAK;
/* characters to ignore */
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -407,7 +407,7 @@ static void efm32_uart_set_termios(struc
if (new->c_iflag & INPCK)
port->read_status_mask |=
UARTn_RXDATAX_FERR | UARTn_RXDATAX_PERR;
- if (new->c_iflag & (BRKINT | PARMRK))
+ if (new->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= SW_UARTn_RXDATAX_BERR;
port->ignore_status_mask = 0;
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -496,7 +496,7 @@ lpuart_set_termios(struct uart_port *por
sport->port.read_status_mask = 0;
if (termios->c_iflag & INPCK)
sport->port.read_status_mask |= (UARTSR1_FE | UARTSR1_PE);
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
sport->port.read_status_mask |= UARTSR1_FE;
/* characters to ignore */
--- a/drivers/tty/serial/ip22zilog.c
+++ b/drivers/tty/serial/ip22zilog.c
@@ -850,7 +850,7 @@ ip22zilog_convert_to_zs(struct uart_ip22
up->port.read_status_mask = Rx_OVR;
if (iflag & INPCK)
up->port.read_status_mask |= CRC_ERR | PAR_ERR;
- if (iflag & (BRKINT | PARMRK))
+ if (iflag & (IGNBRK | BRKINT | PARMRK))
up->port.read_status_mask |= BRK_ABRT;
up->port.ignore_status_mask = 0;
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -737,7 +737,7 @@ static void m32r_sio_set_termios(struct
up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
if (termios->c_iflag & INPCK)
up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
up->port.read_status_mask |= UART_LSR_BI;
/*
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -842,7 +842,7 @@ static void max310x_set_termios(struct u
if (termios->c_iflag & INPCK)
port->read_status_mask |= MAX310X_LSR_RXPAR_BIT |
MAX310X_LSR_FRERR_BIT;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= MAX310X_LSR_RXBRK_BIT;
/* Set status ignore mask */
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -248,6 +248,12 @@ static void mcf_set_termios(struct uart_
mr1 |= MCFUART_MR1_PARITYNONE;
}
+ /*
+ * FIXME: port->read_status_mask and port->ignore_status_mask
+ * need to be initialized based on termios settings for
+ * INPCK, IGNBRK, IGNPAR, PARMRK, BRKINT
+ */
+
if (termios->c_cflag & CSTOPB)
mr2 |= MCFUART_MR2_STOP2;
else
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -977,7 +977,7 @@ serial_hsu_set_termios(struct uart_port
up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
if (termios->c_iflag & INPCK)
up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
up->port.read_status_mask |= UART_LSR_BI;
/* Characters to ignore */
--- a/drivers/tty/serial/mpsc.c
+++ b/drivers/tty/serial/mpsc.c
@@ -1458,7 +1458,7 @@ static void mpsc_set_termios(struct uart
pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE
| SDMA_DESC_CMDSTAT_FR;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR;
/* Characters/events to ignore */
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -570,7 +570,7 @@ static void msm_set_termios(struct uart_
port->read_status_mask = 0;
if (termios->c_iflag & INPCK)
port->read_status_mask |= UART_SR_PAR_FRAME_ERR;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= UART_SR_RX_BREAK;
uart_update_timeout(port, termios->c_cflag, baud);
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -604,7 +604,7 @@ static void mxs_auart_settermios(struct
if (termios->c_iflag & INPCK)
u->read_status_mask |= AUART_STAT_PERR;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
u->read_status_mask |= AUART_STAT_BERR;
/*
--- a/drivers/tty/serial/netx-serial.c
+++ b/drivers/tty/serial/netx-serial.c
@@ -419,7 +419,7 @@ netx_set_termios(struct uart_port *port,
}
port->read_status_mask = 0;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= SR_BE;
if (termios->c_iflag & INPCK)
port->read_status_mask |= SR_PE | SR_FE;
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -1092,7 +1092,7 @@ static void pmz_convert_to_zs(struct uar
uap->port.read_status_mask = Rx_OVR;
if (iflag & INPCK)
uap->port.read_status_mask |= CRC_ERR | PAR_ERR;
- if (iflag & (BRKINT | PARMRK))
+ if (iflag & (IGNBRK | BRKINT | PARMRK))
uap->port.read_status_mask |= BRK_ABRT;
uap->port.ignore_status_mask = 0;
--- a/drivers/tty/serial/pnx8xxx_uart.c
+++ b/drivers/tty/serial/pnx8xxx_uart.c
@@ -477,7 +477,7 @@ pnx8xxx_set_termios(struct uart_port *po
sport->port.read_status_mask |=
FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR);
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
sport->port.read_status_mask |=
ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK);
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -492,7 +492,7 @@ serial_pxa_set_termios(struct uart_port
up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
if (termios->c_iflag & INPCK)
up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
up->port.read_status_mask |= UART_LSR_BI;
/*
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -596,7 +596,7 @@ static void sbd_set_termios(struct uart_
if (termios->c_iflag & INPCK)
uport->read_status_mask |= M_DUART_FRM_ERR |
M_DUART_PARITY_ERR;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
uport->read_status_mask |= M_DUART_RCVD_BRK;
uport->ignore_status_mask = 0;
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -667,7 +667,7 @@ static void sccnxp_set_termios(struct ua
port->read_status_mask = SR_OVR;
if (termios->c_iflag & INPCK)
port->read_status_mask |= SR_PE | SR_FE;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= SR_BRK;
/* Set status ignore mask */
--- a/drivers/tty/serial/serial_ks8695.c
+++ b/drivers/tty/serial/serial_ks8695.c
@@ -437,7 +437,7 @@ static void ks8695uart_set_termios(struc
port->read_status_mask = URLS_URROE;
if (termios->c_iflag & INPCK)
port->read_status_mask |= (URLS_URFE | URLS_URPE);
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= URLS_URBI;
/*
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -702,7 +702,7 @@ serial_txx9_set_termios(struct uart_port
TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS;
if (termios->c_iflag & INPCK)
up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
up->port.read_status_mask |= TXX9_SIDISR_UBRK;
/*
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -908,7 +908,7 @@ static void sirfsoc_uart_set_termios(str
if (termios->c_iflag & INPCK)
port->read_status_mask |= uint_en->sirfsoc_frm_err_en;
}
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= uint_en->sirfsoc_rxd_brk_en;
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
if (termios->c_iflag & IGNPAR)
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -547,7 +547,7 @@ static void asc_set_termios(struct uart_
ascport->port.read_status_mask = ASC_RXBUF_DUMMY_OE;
if (termios->c_iflag & INPCK)
ascport->port.read_status_mask |= ASC_RXBUF_FE | ASC_RXBUF_PE;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
ascport->port.read_status_mask |= ASC_RXBUF_DUMMY_BE;
/*
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -719,7 +719,7 @@ static void sunsab_convert_to_sab(struct
if (iflag & INPCK)
up->port.read_status_mask |= (SAB82532_ISR0_PERR |
SAB82532_ISR0_FERR);
- if (iflag & (BRKINT | PARMRK))
+ if (iflag & (IGNBRK | BRKINT | PARMRK))
up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8);
/*
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -834,7 +834,7 @@ sunsu_change_speed(struct uart_port *por
up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
if (iflag & INPCK)
up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (iflag & (BRKINT | PARMRK))
+ if (iflag & (IGNBRK | BRKINT | PARMRK))
up->port.read_status_mask |= UART_LSR_BI;
/*
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -915,7 +915,7 @@ sunzilog_convert_to_zs(struct uart_sunzi
up->port.read_status_mask = Rx_OVR;
if (iflag & INPCK)
up->port.read_status_mask |= CRC_ERR | PAR_ERR;
- if (iflag & (BRKINT | PARMRK))
+ if (iflag & (IGNBRK | BRKINT | PARMRK))
up->port.read_status_mask |= BRK_ABRT;
up->port.ignore_status_mask = 0;
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -936,7 +936,7 @@ static void qe_uart_set_termios(struct u
port->read_status_mask = BD_SC_EMPTY | BD_SC_OV;
if (termios->c_iflag & INPCK)
port->read_status_mask |= BD_SC_FR | BD_SC_PR;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= BD_SC_BR;
/*
--- a/drivers/tty/serial/vr41xx_siu.c
+++ b/drivers/tty/serial/vr41xx_siu.c
@@ -559,7 +559,7 @@ static void siu_set_termios(struct uart_
port->read_status_mask = UART_LSR_THRE | UART_LSR_OE | UART_LSR_DR;
if (c_iflag & INPCK)
port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (c_iflag & (BRKINT | PARMRK))
+ if (c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= UART_LSR_BI;
port->ignore_status_mask = 0;
--- a/drivers/tty/serial/zs.c
+++ b/drivers/tty/serial/zs.c
@@ -923,7 +923,7 @@ static void zs_set_termios(struct uart_p
uport->read_status_mask = Rx_OVR;
if (termios->c_iflag & INPCK)
uport->read_status_mask |= FRM_ERR | PAR_ERR;
- if (termios->c_iflag & (BRKINT | PARMRK))
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
uport->read_status_mask |= Rx_BRK;
uport->ignore_status_mask = 0;
next prev parent reply other threads:[~2014-07-07 23:58 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-07 23:56 [PATCH 3.14 00/94] 3.14.12-stable review Greg Kroah-Hartman
2014-07-07 23:56 ` [PATCH 3.14 01/94] ibmvscsi: Abort init sequence during error recovery Greg Kroah-Hartman
2014-07-07 23:56 ` [PATCH 3.14 02/94] ibmvscsi: Add memory barriers for send / receive Greg Kroah-Hartman
2014-07-07 23:56 ` [PATCH 3.14 03/94] virtio-scsi: avoid cancelling uninitialized work items Greg Kroah-Hartman
2014-07-07 23:56 ` [PATCH 3.14 04/94] scsi_error: fix invalid setting of host byte Greg Kroah-Hartman
2014-07-07 23:56 ` [PATCH 3.14 05/94] virtio-scsi: fix various bad behavior on aborted requests Greg Kroah-Hartman
2014-07-07 23:56 ` [PATCH 3.14 06/94] xhci: Use correct SLOT ID when handling a reset device command Greg Kroah-Hartman
2014-07-07 23:56 ` [PATCH 3.14 07/94] xhci: correct burst count field for isoc transfers on 1.0 xhci hosts Greg Kroah-Hartman
2014-07-07 23:56 ` [PATCH 3.14 08/94] xhci: Fix runtime suspended xhci from blocking system suspend Greg Kroah-Hartman
2014-07-07 23:56 ` [PATCH 3.14 09/94] USB: option: add device ID for SpeedUp SU9800 usb 3g modem Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 11/94] usb: musb: ux500: dont propagate the OF node Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 12/94] usb: musb: Ensure that cppi41 timer gets armed on premature DMA TX irq Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 13/94] usb: musb: Fix panic upon musb_am335x module removal Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 14/94] usb: chipidea: udc: delete td from reqs td list at ep_dequeue Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 15/94] USB: ftdi_sio: fix null deref at port probe Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 18/94] rt2x00: disable TKIP on USB Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 19/94] rt2x00: fix rfkill regression on rt2500pci Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 20/94] mtd: eLBC NAND: fix subpage write support Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 21/94] mtd: nand: omap: fix BCHx ecc.correct to return detected bit-flips in erased-page Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 22/94] mtd: pxa3xx_nand: make the driver work on big-endian systems Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 23/94] vgaswitcheroo: switch the mux to the igp on power down when runpm is enabled Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 24/94] drm/nouveau/kms/nv04-nv40: fix pageflip events via special case Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 25/94] drm/nouveau/disp/nv04-nv40: abort scanoutpos query on vga analog Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 26/94] drm/nouveau/kms: reference vblank for crtc during pageflip Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 27/94] drm/radeon: only apply hdmi bpc pll flags when encoder mode is hdmi Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 28/94] drm/radeon: fix typo in radeon_connector_is_dp12_capable() Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 29/94] drm/radeon/dp: fix lane/clock setup for dp 1.2 capable devices Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 30/94] drm/radeon/atom: fix dithering on certain panels Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 32/94] drm/radeon/dpm: fix typo in vddci setup for eg/btc Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 34/94] drm/radeon/cik: fix typo in EOP packet Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 35/94] drm/nv50-/mc: fix kms pageflip events by reordering irq handling order Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 36/94] drm/gk208/gr: add missing registers to grctx init Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 38/94] drm/i915: set backlight duty cycle after backlight enable for gen4 Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 39/94] drm/vmwgfx: Fix incorrect write to read-only register v2: Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 40/94] Bluetooth: Fix SSP acceptor just-works confirmation without MITM Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 41/94] Bluetooth: Fix check for connection encryption Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 42/94] Bluetooth: Fix indicating discovery state when canceling inquiry Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 43/94] Bluetooth: Fix locking of hdev when calling into SMP code Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 44/94] Bluetooth: Allow change security level on ATT_CID in slave role Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 45/94] dm thin: update discard_granularity to reflect the thin-pool blocksize Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 46/94] rbd: use reference counts for image requests Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 47/94] rbd: handle parent_overlap on writes correctly Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 48/94] hwmon: (ina2xx) Cast to s16 on shunt and current regs Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 49/94] intel_pstate: Correct rounding in busy calculation Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 51/94] mac80211: dont check netdev state for debugfs read/write Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 53/94] iwlwifi: pcie: try to get ownership several times Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 54/94] hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entry Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 55/94] mm, pcp: allow restoring percpu_pagelist_fraction default Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 56/94] arm64: mm: Make icache synchronisation logic huge page aware Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 57/94] ARM: OMAP2+: Fix parser-bug in platform muxing code Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 59/94] net: allwinner: emac: Add missing free_irq Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 62/94] CIFS: fix mount failure with broken pathnames when smb3 mount with mapchars option Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 63/94] blkcg: fix use-after-free in __blkg_release_rcu() by making blkcg_gq refcnt an atomic_t Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 64/94] ext4: Fix buffer double free in ext4_alloc_branch() Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 65/94] ext4: Fix hole punching for files with indirect blocks Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 66/94] KVM: x86: Increase the number of fixed MTRR regs to 10 Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 67/94] KVM: x86: preserve the high 32-bits of the PAT register Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 68/94] kvm: fix wrong address when writing Hyper-V tsc page Greg Kroah-Hartman
2014-07-07 23:57 ` [PATCH 3.14 69/94] iio: of_iio_channel_get_by_name() returns non-null pointers for error legs Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 70/94] staging: iio/ad7291: fix error code in ad7291_probe() Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 71/94] nfsd: fix rare symlink decoding bug Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 72/94] tools: ffs-test: fix header values endianess Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 73/94] tracing: Remove ftrace_stop/start() from reading the trace file Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 74/94] md: flush writes before starting a recovery Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 75/94] irqchip: spear_shirq: Fix interrupt offset Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 77/94] mlx4_core: Fix incorrect FLAGS1 bitmap test in mlx4_QUERY_FUNC_CAP Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 78/94] clk: qcom: Fix clk_rcg2_is_enabled() check Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 79/94] clk: qcom: Fix mmcc-8974s PLL configurations Greg Kroah-Hartman
2014-07-07 23:58 ` Greg Kroah-Hartman [this message]
2014-07-07 23:58 ` [PATCH 3.14 81/94] tty: Correct INPCK handling Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 82/94] netfilter: nf_nat: fix oops on netns removal Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 83/94] brcmfmac: Fix brcmf_chip_ai_coredisable not applying reset bits to BCMA_IOCTL Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 84/94] mmc: rtsx: add R1-no-CRC mmc command type handle Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 85/94] drm/i915: fix display power sw state reporting Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 86/94] aio: block io_destroy() until all context requests are completed Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 87/94] audit: remove superfluous new- prefix in AUDIT_LOGIN messages Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 88/94] ALSA: usb-audio: Suppress repetitive debug messages from retire_playback_urb() Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 89/94] ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while DEBUG not defined Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 90/94] arch/unicore32/mm/alignment.c: include "asm/pgtable.h" to avoid compiling error Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 91/94] drivers/video/fbdev/fb-puv3.c: Add header files for function unifb_mmap Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 92/94] mm/numa: Remove BUG_ON() in __handle_mm_fault() Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 93/94] slab: fix oops when reading /proc/slab_allocators Greg Kroah-Hartman
2014-07-07 23:58 ` [PATCH 3.14 94/94] sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue Greg Kroah-Hartman
2014-07-08 13:24 ` [PATCH 3.14 00/94] 3.14.12-stable review Guenter Roeck
2014-07-08 22:15 ` Greg Kroah-Hartman
2014-07-15 1:00 ` Greg Kroah-Hartman
2014-07-08 19:31 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140707235759.136530525@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=athlon_@mail.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=peter@hurleysoftware.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).