[PATCH 3.10 05/21] libata: support the ata host which implements a queue depth less than 32

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kevin Hao <haokexin@gmail.com>

commit 1871ee134b73fb4cadab75752a7152ed2813c751 upstream.

The sata on fsl mpc8315e is broken after the commit 8a4aeec8d2d6
("libata/ahci: accommodate tag ordered controllers"). The reason is
that the ata controller on this SoC only implement a queue depth of
16. When issuing the commands in tag order, all the commands in tag
16 ~ 31 are mapped to tag 0 unconditionally and then causes the sata
malfunction. It makes no senses to use a 32 queue in software while
the hardware has less queue depth. So consider the queue depth
implemented by the hardware when requesting a command tag.

Fixes: 8a4aeec8d2d6 ("libata/ahci: accommodate tag ordered controllers")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |   22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4758,6 +4758,10 @@ void swap_buf_le16(u16 *buf, unsigned in
  *	ata_qc_new - Request an available ATA command, for queueing
  *	@ap: target port
  *
+ *	Some ATA host controllers may implement a queue depth which is less
+ *	than ATA_MAX_QUEUE. So we shouldn't allocate a tag which is beyond
+ *	the hardware limitation.
+ *
  *	LOCKING:
  *	None.
  */
@@ -4765,14 +4769,16 @@ void swap_buf_le16(u16 *buf, unsigned in
 static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
 {
 	struct ata_queued_cmd *qc = NULL;
-	unsigned int i, tag;
+	unsigned int i, tag, max_queue;
+
+	max_queue = ap->scsi_host->can_queue;
 
 	/* no command while frozen */
 	if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
 		return NULL;
 
-	for (i = 0; i < ATA_MAX_QUEUE; i++) {
-		tag = (i + ap->last_tag + 1) % ATA_MAX_QUEUE;
+	for (i = 0, tag = ap->last_tag + 1; i < max_queue; i++, tag++) {
+		tag = tag < max_queue ? tag : 0;
 
 		/* the last tag is reserved for internal command. */
 		if (tag == ATA_TAG_INTERNAL)
@@ -6154,6 +6160,16 @@ int ata_host_register(struct ata_host *h
 {
 	int i, rc;
 
+	/*
+	 * The max queue supported by hardware must not be greater than
+	 * ATA_MAX_QUEUE.
+	 */
+	if (sht->can_queue > ATA_MAX_QUEUE) {
+		dev_err(host->dev, "BUG: the hardware max queue is too large\n");
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
 	/* host must have been started */
 	if (!(host->flags & ATA_HOST_STARTED)) {
 		dev_err(host->dev, "BUG: trying to register unstarted host\n");