From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Nicolas Ferre , Bo Shen , Felipe Balbi Subject: [PATCH 3.18 149/183] usb: gadget: udc: atmel: fix possible IN hang issue Date: Sun, 25 Jan 2015 10:07:51 -0800 Message-Id: <20150125180816.654070676@linuxfoundation.org> In-Reply-To: <20150125180810.160428929@linuxfoundation.org> References: <20150125180810.160428929@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15 Sender: linux-kernel-owner@vger.kernel.org List-ID: 3.18-stable review patch. If anyone has any objections, please let me know. ------------------ From: Bo Shen commit 6785a1034461c2d2c205215f63a50a740896e55b upstream. When receive data, the RXRDY in status register set by hardware after a new packet has been stored in the endpoint FIFO. When it is copied from FIFO, this bit is cleared which make the FIFO can be accessed again. In the receive_data() function, this bit RXRDY has been cleared. So, after the receive_data() function return, this bit should not be cleared again, or else it may cause the accessing FIFO corrupt, which will make the data loss. Fixes: 914a3f3b3754 (USB: add atmel_usba_udc driver) Acked-by: Nicolas Ferre Signed-off-by: Bo Shen Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/atmel_usba_udc.c | 1 - 1 file changed, 1 deletion(-) --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1572,7 +1572,6 @@ static void usba_ep_irq(struct usba_udc if ((epstatus & epctrl) & USBA_RX_BK_RDY) { DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name); receive_data(ep); - usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); } }