[PATCH 3.18 00/20] 3.18.8-stable review

[PATCH 3.18 00/20] 3.18.8-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.18.8 release.
There are 20 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri Feb 27 02:08:41 UTC 2015.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.18.8-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.18.8-rc1

Austin Lund <austin.lund@gmail.com>
    media/rc: Send sync space information on the lirc device

Eric Sandeen <sandeen@redhat.com>
    ext4: ignore journal checksum on remount; don't fail

Eric Dumazet <edumazet@google.com>
    net: sched: fix panic in rate estimators

Haiyang Zhang <haiyangz@microsoft.com>
    hyperv: Fix the error processing in netvsc_send()

Saran Maruti Ramanara <saran.neti@telus.com>
    net: sctp: fix passing wrong parameter header to param_type2af in sctp_process_param

Florian Westphal <fw@strlen.de>
    ppp: deflate: never return len larger than output buffer

Eric Dumazet <edumazet@google.com>
    ipv4: tcp: get rid of ugly unicast_sock

Eric Dumazet <edumazet@google.com>
    tcp: ipv4: initialize unicast_sock sk_pacing_rate

Roopa Prabhu <roopa@cumulusnetworks.com>
    bridge: dont send notification when skb->len == 0 in rtnl_bridge_notify

Christoph Hellwig <hch@lst.de>
    net: don't OOPS on socket aio

Govindarajulu Varadarajan <_govind@gmx.com>
    bnx2x: fix napi poll return value for repoll

Hannes Frederic Sowa <hannes@stressinduktion.org>
    ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too

subashab@codeaurora.org <subashab@codeaurora.org>
    ping: Fix race in free in receive path

Herbert Xu <herbert@gondor.apana.org.au>
    udp_diag: Fix socket skipping within chain

Hannes Frederic Sowa <hannes@stressinduktion.org>
    ipv4: try to cache dst_entries which would cause a redirect

Daniel Borkmann <dborkman@redhat.com>
    net: sctp: fix slab corruption from use after free on INIT collisions

Eric Dumazet <edumazet@google.com>
    netxen: fix netxen_nic_poll() logic

Hagen Paul Pfeifer <hagen@jauu.net>
    ipv6: stop sending PTB packets for MTU < 1280

Eric Dumazet <edumazet@google.com>
    net: rps: fix cpu unplug

Willem de Bruijn <willemb@google.com>
    ip: zero sockaddr returned on error queue


-------------

Diffstat:

 Makefile                                           |  4 +-
 drivers/media/rc/ir-lirc-codec.c                   | 12 ++++--
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c    |  2 +-
 .../net/ethernet/qlogic/netxen/netxen_nic_main.c   |  5 ++-
 drivers/net/hyperv/netvsc.c                        | 11 ++++--
 drivers/net/ppp/ppp_deflate.c                      |  2 +-
 fs/ext4/super.c                                    |  5 +--
 include/net/ip.h                                   | 13 ++++---
 include/net/netns/ipv4.h                           |  1 +
 include/net/sch_generic.h                          | 13 +++----
 net/core/dev.c                                     | 20 +++++++---
 net/core/rtnetlink.c                               |  6 ++-
 net/ipv4/ip_forward.c                              |  3 +-
 net/ipv4/ip_output.c                               | 29 ++------------
 net/ipv4/ip_sockglue.c                             |  8 +---
 net/ipv4/ping.c                                    |  5 ++-
 net/ipv4/route.c                                   |  9 +++--
 net/ipv4/tcp_ipv4.c                                | 37 +++++++++++++++---
 net/ipv4/udp_diag.c                                |  4 +-
 net/ipv6/datagram.c                                | 10 ++---
 net/ipv6/ip6_fib.c                                 | 45 +++++++++++++---------
 net/ipv6/route.c                                   |  7 +---
 net/sctp/associola.c                               |  1 -
 net/sctp/sm_make_chunk.c                           |  2 +-
 net/socket.c                                       |  3 --
 25 files changed, 143 insertions(+), 114 deletions(-)

[PATCH 3.18 01/20] ip: zero sockaddr returned on error queue

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Willem de Bruijn <willemb@google.com>

[ Upstream commit f812116b174e59a350acc8e4856213a166a91222 ]

The sockaddr is returned in IP(V6)_RECVERR as part of errhdr. That
structure is defined and allocated on the stack as

    struct {
            struct sock_extended_err ee;
            struct sockaddr_in(6)    offender;
    } errhdr;

The second part is only initialized for certain SO_EE_ORIGIN values.
Always initialize it completely.

An MTU exceeded error on a SOCK_RAW/IPPROTO_RAW is one example that
would return uninitialized bytes.

Signed-off-by: Willem de Bruijn <willemb@google.com>

----

Also verified that there is no padding between errhdr.ee and
errhdr.offender that could leak additional kernel data.
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_sockglue.c |    8 ++------
 net/ipv6/datagram.c    |   10 +++-------
 2 files changed, 5 insertions(+), 13 deletions(-)

--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -443,15 +443,11 @@ int ip_recv_error(struct sock *sk, struc
 
 	memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err));
 	sin = &errhdr.offender;
-	sin->sin_family = AF_UNSPEC;
+	memset(sin, 0, sizeof(*sin));
 	if (serr->ee.ee_origin == SO_EE_ORIGIN_ICMP) {
-		struct inet_sock *inet = inet_sk(sk);
-
 		sin->sin_family = AF_INET;
 		sin->sin_addr.s_addr = ip_hdr(skb)->saddr;
-		sin->sin_port = 0;
-		memset(&sin->sin_zero, 0, sizeof(sin->sin_zero));
-		if (inet->cmsg_flags)
+		if (inet_sk(sk)->cmsg_flags)
 			ip_cmsg_recv(msg, skb);
 	}
 
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -383,11 +383,10 @@ int ipv6_recv_error(struct sock *sk, str
 
 	memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err));
 	sin = &errhdr.offender;
-	sin->sin6_family = AF_UNSPEC;
+	memset(sin, 0, sizeof(*sin));
+
 	if (serr->ee.ee_origin != SO_EE_ORIGIN_LOCAL) {
 		sin->sin6_family = AF_INET6;
-		sin->sin6_flowinfo = 0;
-		sin->sin6_port = 0;
 		if (np->rxopt.all)
 			ip6_datagram_recv_common_ctl(sk, msg, skb);
 		if (skb->protocol == htons(ETH_P_IPV6)) {
@@ -398,12 +397,9 @@ int ipv6_recv_error(struct sock *sk, str
 				ipv6_iface_scope_id(&sin->sin6_addr,
 						    IP6CB(skb)->iif);
 		} else {
-			struct inet_sock *inet = inet_sk(sk);
-
 			ipv6_addr_set_v4mapped(ip_hdr(skb)->saddr,
 					       &sin->sin6_addr);
-			sin->sin6_scope_id = 0;
-			if (inet->cmsg_flags)
+			if (inet_sk(sk)->cmsg_flags)
 				ip_cmsg_recv(msg, skb);
 		}
 	}

[PATCH 3.18 02/20] net: rps: fix cpu unplug

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit ac64da0b83d82abe62f78b3d0e21cca31aea24fa ]

softnet_data.input_pkt_queue is protected by a spinlock that
we must hold when transferring packets from victim queue to an active
one. This is because other cpus could still be trying to enqueue packets
into victim queue.

A second problem is that when we transfert the NAPI poll_list from
victim to current cpu, we absolutely need to special case the percpu
backlog, because we do not want to add complex locking to protect
process_queue : Only owner cpu is allowed to manipulate it, unless cpu
is offline.

Based on initial patch from Prasad Sodagudi & Subash Abhinov
Kasiviswanathan.

This version is better because we do not slow down packet processing,
only make migration safer.

Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Reported-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |   20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6990,10 +6990,20 @@ static int dev_cpu_callback(struct notif
 		oldsd->output_queue = NULL;
 		oldsd->output_queue_tailp = &oldsd->output_queue;
 	}
-	/* Append NAPI poll list from offline CPU. */
-	if (!list_empty(&oldsd->poll_list)) {
-		list_splice_init(&oldsd->poll_list, &sd->poll_list);
-		raise_softirq_irqoff(NET_RX_SOFTIRQ);
+	/* Append NAPI poll list from offline CPU, with one exception :
+	 * process_backlog() must be called by cpu owning percpu backlog.
+	 * We properly handle process_queue & input_pkt_queue later.
+	 */
+	while (!list_empty(&oldsd->poll_list)) {
+		struct napi_struct *napi = list_first_entry(&oldsd->poll_list,
+							    struct napi_struct,
+							    poll_list);
+
+		list_del_init(&napi->poll_list);
+		if (napi->poll == process_backlog)
+			napi->state = 0;
+		else
+			____napi_schedule(sd, napi);
 	}
 
 	raise_softirq_irqoff(NET_TX_SOFTIRQ);
@@ -7004,7 +7014,7 @@ static int dev_cpu_callback(struct notif
 		netif_rx_internal(skb);
 		input_queue_head_incr(oldsd);
 	}
-	while ((skb = __skb_dequeue(&oldsd->input_pkt_queue))) {
+	while ((skb = skb_dequeue(&oldsd->input_pkt_queue))) {
 		netif_rx_internal(skb);
 		input_queue_head_incr(oldsd);
 	}

[PATCH 3.18 03/20] ipv6: stop sending PTB packets for MTU < 1280

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hagen Paul Pfeifer <hagen@jauu.net>

[ Upstream commit 9d289715eb5c252ae15bd547cb252ca547a3c4f2 ]

Reduce the attack vector and stop generating IPv6 Fragment Header for
paths with an MTU smaller than the minimum required IPv6 MTU
size (1280 byte) - called atomic fragments.

See IETF I-D "Deprecating the Generation of IPv6 Atomic Fragments" [1]
for more information and how this "feature" can be misused.

[1] https://tools.ietf.org/html/draft-ietf-6man-deprecate-atomfrag-generation-00

Signed-off-by: Fernando Gont <fgont@si6networks.com>
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/route.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1150,12 +1150,9 @@ static void ip6_rt_update_pmtu(struct ds
 		struct net *net = dev_net(dst->dev);
 
 		rt6->rt6i_flags |= RTF_MODIFIED;
-		if (mtu < IPV6_MIN_MTU) {
-			u32 features = dst_metric(dst, RTAX_FEATURES);
+		if (mtu < IPV6_MIN_MTU)
 			mtu = IPV6_MIN_MTU;
-			features |= RTAX_FEATURE_ALLFRAG;
-			dst_metric_set(dst, RTAX_FEATURES, features);
-		}
+
 		dst_metric_set(dst, RTAX_MTU, mtu);
 		rt6_update_expires(rt6, net->ipv6.sysctl.ip6_rt_mtu_expires);
 	}

[PATCH 3.18 04/20] netxen: fix netxen_nic_poll() logic

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 6088beef3f7517717bd21d90b379714dd0837079 ]

NAPI poll logic now enforces that a poller returns exactly the budget
when it wants to be called again.

If a driver limits TX completion, it has to return budget as well when
the limit is hit, not the number of received packets.

Reported-and-tested-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: d75b1ade567f ("net: less interrupt masking in NAPI")
Cc: Manish Chopra <manish.chopra@qlogic.com>
Acked-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
@@ -2388,7 +2388,10 @@ static int netxen_nic_poll(struct napi_s
 
 	work_done = netxen_process_rcv_ring(sds_ring, budget);
 
-	if ((work_done < budget) && tx_complete) {
+	if (!tx_complete)
+		work_done = budget;
+
+	if (work_done < budget) {
 		napi_complete(&sds_ring->napi);
 		if (test_bit(__NX_DEV_UP, &adapter->state))
 			netxen_nic_enable_int(sds_ring);

[PATCH 3.18 05/20] net: sctp: fix slab corruption from use after free on INIT collisions

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <dborkman@redhat.com>

[ Upstream commit 600ddd6825543962fb807884169e57b580dba208 ]

When hitting an INIT collision case during the 4WHS with AUTH enabled, as
already described in detail in commit 1be9a950c646 ("net: sctp: inherit
auth_capable on INIT collisions"), it can happen that we occasionally
still remotely trigger the following panic on server side which seems to
have been uncovered after the fix from commit 1be9a950c646 ...

[  533.876389] BUG: unable to handle kernel paging request at 00000000ffffffff
[  533.913657] IP: [<ffffffff811ac385>] __kmalloc+0x95/0x230
[  533.940559] PGD 5030f2067 PUD 0
[  533.957104] Oops: 0000 [#1] SMP
[  533.974283] Modules linked in: sctp mlx4_en [...]
[  534.939704] Call Trace:
[  534.951833]  [<ffffffff81294e30>] ? crypto_init_shash_ops+0x60/0xf0
[  534.984213]  [<ffffffff81294e30>] crypto_init_shash_ops+0x60/0xf0
[  535.015025]  [<ffffffff8128c8ed>] __crypto_alloc_tfm+0x6d/0x170
[  535.045661]  [<ffffffff8128d12c>] crypto_alloc_base+0x4c/0xb0
[  535.074593]  [<ffffffff8160bd42>] ? _raw_spin_lock_bh+0x12/0x50
[  535.105239]  [<ffffffffa0418c11>] sctp_inet_listen+0x161/0x1e0 [sctp]
[  535.138606]  [<ffffffff814e43bd>] SyS_listen+0x9d/0xb0
[  535.166848]  [<ffffffff816149a9>] system_call_fastpath+0x16/0x1b

... or depending on the the application, for example this one:

[ 1370.026490] BUG: unable to handle kernel paging request at 00000000ffffffff
[ 1370.026506] IP: [<ffffffff811ab455>] kmem_cache_alloc+0x75/0x1d0
[ 1370.054568] PGD 633c94067 PUD 0
[ 1370.070446] Oops: 0000 [#1] SMP
[ 1370.085010] Modules linked in: sctp kvm_amd kvm [...]
[ 1370.963431] Call Trace:
[ 1370.974632]  [<ffffffff8120f7cf>] ? SyS_epoll_ctl+0x53f/0x960
[ 1371.000863]  [<ffffffff8120f7cf>] SyS_epoll_ctl+0x53f/0x960
[ 1371.027154]  [<ffffffff812100d3>] ? anon_inode_getfile+0xd3/0x170
[ 1371.054679]  [<ffffffff811e3d67>] ? __alloc_fd+0xa7/0x130
[ 1371.080183]  [<ffffffff816149a9>] system_call_fastpath+0x16/0x1b

With slab debugging enabled, we can see that the poison has been overwritten:

[  669.826368] BUG kmalloc-128 (Tainted: G        W     ): Poison overwritten
[  669.826385] INFO: 0xffff880228b32e50-0xffff880228b32e50. First byte 0x6a instead of 0x6b
[  669.826414] INFO: Allocated in sctp_auth_create_key+0x23/0x50 [sctp] age=3 cpu=0 pid=18494
[  669.826424]  __slab_alloc+0x4bf/0x566
[  669.826433]  __kmalloc+0x280/0x310
[  669.826453]  sctp_auth_create_key+0x23/0x50 [sctp]
[  669.826471]  sctp_auth_asoc_create_secret+0xcb/0x1e0 [sctp]
[  669.826488]  sctp_auth_asoc_init_active_key+0x68/0xa0 [sctp]
[  669.826505]  sctp_do_sm+0x29d/0x17c0 [sctp] [...]
[  669.826629] INFO: Freed in kzfree+0x31/0x40 age=1 cpu=0 pid=18494
[  669.826635]  __slab_free+0x39/0x2a8
[  669.826643]  kfree+0x1d6/0x230
[  669.826650]  kzfree+0x31/0x40
[  669.826666]  sctp_auth_key_put+0x19/0x20 [sctp]
[  669.826681]  sctp_assoc_update+0x1ee/0x2d0 [sctp]
[  669.826695]  sctp_do_sm+0x674/0x17c0 [sctp]

Since this only triggers in some collision-cases with AUTH, the problem at
heart is that sctp_auth_key_put() on asoc->asoc_shared_key is called twice
when having refcnt 1, once directly in sctp_assoc_update() and yet again
from within sctp_auth_asoc_init_active_key() via sctp_assoc_update() on
the already kzfree'd memory, which is also consistent with the observation
of the poison decrease from 0x6b to 0x6a (note: the overwrite is detected
at a later point in time when poison is checked on new allocation).

Reference counting of auth keys revisited:

Shared keys for AUTH chunks are being stored in endpoints and associations
in endpoint_shared_keys list. On endpoint creation, a null key is being
added; on association creation, all endpoint shared keys are being cached
and thus cloned over to the association. struct sctp_shared_key only holds
a pointer to the actual key bytes, that is, struct sctp_auth_bytes which
keeps track of users internally through refcounting. Naturally, on assoc
or enpoint destruction, sctp_shared_key are being destroyed directly and
the reference on sctp_auth_bytes dropped.

User space can add keys to either list via setsockopt(2) through struct
sctp_authkey and by passing that to sctp_auth_set_key() which replaces or
adds a new auth key. There, sctp_auth_create_key() creates a new sctp_auth_bytes
with refcount 1 and in case of replacement drops the reference on the old
sctp_auth_bytes. A key can be set active from user space through setsockopt()
on the id via sctp_auth_set_active_key(), which iterates through either
endpoint_shared_keys and in case of an assoc, invokes (one of various places)
sctp_auth_asoc_init_active_key().

sctp_auth_asoc_init_active_key() computes the actual secret from local's
and peer's random, hmac and shared key parameters and returns a new key
directly as sctp_auth_bytes, that is asoc->asoc_shared_key, plus drops
the reference if there was a previous one. The secret, which where we
eventually double drop the ref comes from sctp_auth_asoc_set_secret() with
intitial refcount of 1, which also stays unchanged eventually in
sctp_assoc_update(). This key is later being used for crypto layer to
set the key for the hash in crypto_hash_setkey() from sctp_auth_calculate_hmac().

To close the loop: asoc->asoc_shared_key is freshly allocated secret
material and independant of the sctp_shared_key management keeping track
of only shared keys in endpoints and assocs. Hence, also commit 4184b2a79a76
("net: sctp: fix memory leak in auth key management") is independant of
this bug here since it concerns a different layer (though same structures
being used eventually). asoc->asoc_shared_key is reference dropped correctly
on assoc destruction in sctp_association_free() and when active keys are
being replaced in sctp_auth_asoc_init_active_key(), it always has a refcount
of 1. Hence, it's freed prematurely in sctp_assoc_update(). Simple fix is
to remove that sctp_auth_key_put() from there which fixes these panics.

Fixes: 730fc3d05cd4 ("[SCTP]: Implete SCTP-AUTH parameter processing")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/associola.c |    1 -
 1 file changed, 1 deletion(-)

--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1182,7 +1182,6 @@ void sctp_assoc_update(struct sctp_assoc
 	asoc->peer.peer_hmacs = new->peer.peer_hmacs;
 	new->peer.peer_hmacs = NULL;
 
-	sctp_auth_key_put(asoc->asoc_shared_key);
 	sctp_auth_asoc_init_active_key(asoc, GFP_ATOMIC);
 }
 

[PATCH 3.18 06/20] ipv4: try to cache dst_entries which would cause a redirect

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <hannes@stressinduktion.org>

[ Upstream commit df4d92549f23e1c037e83323aff58a21b3de7fe0 ]

Not caching dst_entries which cause redirects could be exploited by hosts
on the same subnet, causing a severe DoS attack. This effect aggravated
since commit f88649721268999 ("ipv4: fix dst race in sk_dst_get()").

Lookups causing redirects will be allocated with DST_NOCACHE set which
will force dst_release to free them via RCU.  Unfortunately waiting for
RCU grace period just takes too long, we can end up with >1M dst_entries
waiting to be released and the system will run OOM. rcuos threads cannot
catch up under high softirq load.

Attaching the flag to emit a redirect later on to the specific skb allows
us to cache those dst_entries thus reducing the pressure on allocation
and deallocation.

This issue was discovered by Marcelo Leitner.

Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Marcelo Leitner <mleitner@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ip.h      |   11 ++++++-----
 net/ipv4/ip_forward.c |    3 ++-
 net/ipv4/route.c      |    9 +++++----
 3 files changed, 13 insertions(+), 10 deletions(-)

--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -39,11 +39,12 @@ struct inet_skb_parm {
 	struct ip_options	opt;		/* Compiled IP options		*/
 	unsigned char		flags;
 
-#define IPSKB_FORWARDED		1
-#define IPSKB_XFRM_TUNNEL_SIZE	2
-#define IPSKB_XFRM_TRANSFORMED	4
-#define IPSKB_FRAG_COMPLETE	8
-#define IPSKB_REROUTED		16
+#define IPSKB_FORWARDED		BIT(0)
+#define IPSKB_XFRM_TUNNEL_SIZE	BIT(1)
+#define IPSKB_XFRM_TRANSFORMED	BIT(2)
+#define IPSKB_FRAG_COMPLETE	BIT(3)
+#define IPSKB_REROUTED		BIT(4)
+#define IPSKB_DOREDIRECT	BIT(5)
 
 	u16			frag_max_size;
 };
--- a/net/ipv4/ip_forward.c
+++ b/net/ipv4/ip_forward.c
@@ -129,7 +129,8 @@ int ip_forward(struct sk_buff *skb)
 	 *	We now generate an ICMP HOST REDIRECT giving the route
 	 *	we calculated.
 	 */
-	if (rt->rt_flags&RTCF_DOREDIRECT && !opt->srr && !skb_sec_path(skb))
+	if (IPCB(skb)->flags & IPSKB_DOREDIRECT && !opt->srr &&
+	    !skb_sec_path(skb))
 		ip_rt_send_redirect(skb);
 
 	skb->priority = rt_tos2priority(iph->tos);
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1554,11 +1554,10 @@ static int __mkroute_input(struct sk_buf
 
 	do_cache = res->fi && !itag;
 	if (out_dev == in_dev && err && IN_DEV_TX_REDIRECTS(out_dev) &&
+	    skb->protocol == htons(ETH_P_IP) &&
 	    (IN_DEV_SHARED_MEDIA(out_dev) ||
-	     inet_addr_onlink(out_dev, saddr, FIB_RES_GW(*res)))) {
-		flags |= RTCF_DOREDIRECT;
-		do_cache = false;
-	}
+	     inet_addr_onlink(out_dev, saddr, FIB_RES_GW(*res))))
+		IPCB(skb)->flags |= IPSKB_DOREDIRECT;
 
 	if (skb->protocol != htons(ETH_P_IP)) {
 		/* Not IP (i.e. ARP). Do not create route, if it is
@@ -2303,6 +2302,8 @@ static int rt_fill_info(struct net *net,
 	r->rtm_flags	= (rt->rt_flags & ~0xFFFF) | RTM_F_CLONED;
 	if (rt->rt_flags & RTCF_NOTIFY)
 		r->rtm_flags |= RTM_F_NOTIFY;
+	if (IPCB(skb)->flags & IPSKB_DOREDIRECT)
+		r->rtm_flags |= RTCF_DOREDIRECT;
 
 	if (nla_put_be32(skb, RTA_DST, dst))
 		goto nla_put_failure;

[PATCH 3.18 07/20] udp_diag: Fix socket skipping within chain

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit 86f3cddbc3037882414c7308973530167906b7e9 ]

While working on rhashtable walking I noticed that the UDP diag
dumping code is buggy.  In particular, the socket skipping within
a chain never happens, even though we record the number of sockets
that should be skipped.

As this code was supposedly copied from TCP, this patch does what
TCP does and resets num before we walk a chain.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/udp_diag.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/ipv4/udp_diag.c
+++ b/net/ipv4/udp_diag.c
@@ -99,11 +99,13 @@ static void udp_dump(struct udp_table *t
 	s_slot = cb->args[0];
 	num = s_num = cb->args[1];
 
-	for (slot = s_slot; slot <= table->mask; num = s_num = 0, slot++) {
+	for (slot = s_slot; slot <= table->mask; s_num = 0, slot++) {
 		struct sock *sk;
 		struct hlist_nulls_node *node;
 		struct udp_hslot *hslot = &table->hash[slot];
 
+		num = 0;
+
 		if (hlist_nulls_empty(&hslot->head))
 			continue;
 

[PATCH 3.18 08/20] ping: Fix race in free in receive path

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "subashab@codeaurora.org" <subashab@codeaurora.org>

[ Upstream commit fc752f1f43c1c038a2c6ae58cc739ebb5953ccb0 ]

An exception is seen in ICMP ping receive path where the skb
destructor sock_rfree() tries to access a freed socket. This happens
because ping_rcv() releases socket reference with sock_put() and this
internally frees up the socket. Later icmp_rcv() will try to free the
skb and as part of this, skb destructor is called and which leads
to a kernel panic as the socket is freed already in ping_rcv().

-->|exception
-007|sk_mem_uncharge
-007|sock_rfree
-008|skb_release_head_state
-009|skb_release_all
-009|__kfree_skb
-010|kfree_skb
-011|icmp_rcv
-012|ip_local_deliver_finish

Fix this incorrect free by cloning this skb and processing this cloned
skb instead.

This patch was suggested by Eric Dumazet

Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ping.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -965,8 +965,11 @@ void ping_rcv(struct sk_buff *skb)
 
 	sk = ping_lookup(net, skb, ntohs(icmph->un.echo.id));
 	if (sk != NULL) {
+		struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
+
 		pr_debug("rcv on socket %p\n", sk);
-		ping_queue_rcv_skb(sk, skb_get(skb));
+		if (skb2)
+			ping_queue_rcv_skb(sk, skb2);
 		sock_put(sk);
 		return;
 	}

[PATCH 3.18 09/20] ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <hannes@stressinduktion.org>

[ Upstream commit 6e9e16e6143b725662e47026a1d0f270721cdd24 ]

Lubomir Rintel reported that during replacing a route the interface
reference counter isn't correctly decremented.

To quote bug <https://bugzilla.kernel.org/show_bug.cgi?id=91941>:
| [root@rhel7-5 lkundrak]# sh -x lal
| + ip link add dev0 type dummy
| + ip link set dev0 up
| + ip link add dev1 type dummy
| + ip link set dev1 up
| + ip addr add 2001:db8:8086::2/64 dev dev0
| + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20
| + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10
| + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20
| + ip link del dev0 type dummy
| Message from syslogd@rhel7-5 at Jan 23 10:54:41 ...
|  kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2
|
| Message from syslogd@rhel7-5 at Jan 23 10:54:51 ...
|  kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2

During replacement of a rt6_info we must walk all parent nodes and check
if the to be replaced rt6_info got propagated. If so, replace it with
an alive one.

Fixes: 4a287eba2de3957 ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag")
Reported-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Tested-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_fib.c |   45 ++++++++++++++++++++++++++-------------------
 1 file changed, 26 insertions(+), 19 deletions(-)

--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -659,6 +659,29 @@ static int fib6_commit_metrics(struct ds
 	return 0;
 }
 
+static void fib6_purge_rt(struct rt6_info *rt, struct fib6_node *fn,
+			  struct net *net)
+{
+	if (atomic_read(&rt->rt6i_ref) != 1) {
+		/* This route is used as dummy address holder in some split
+		 * nodes. It is not leaked, but it still holds other resources,
+		 * which must be released in time. So, scan ascendant nodes
+		 * and replace dummy references to this route with references
+		 * to still alive ones.
+		 */
+		while (fn) {
+			if (!(fn->fn_flags & RTN_RTINFO) && fn->leaf == rt) {
+				fn->leaf = fib6_find_prefix(net, fn);
+				atomic_inc(&fn->leaf->rt6i_ref);
+				rt6_release(rt);
+			}
+			fn = fn->parent;
+		}
+		/* No more references are possible at this point. */
+		BUG_ON(atomic_read(&rt->rt6i_ref) != 1);
+	}
+}
+
 /*
  *	Insert routing information in a node.
  */
@@ -807,11 +830,12 @@ add:
 		rt->dst.rt6_next = iter->dst.rt6_next;
 		atomic_inc(&rt->rt6i_ref);
 		inet6_rt_notify(RTM_NEWROUTE, rt, info);
-		rt6_release(iter);
 		if (!(fn->fn_flags & RTN_RTINFO)) {
 			info->nl_net->ipv6.rt6_stats->fib_route_nodes++;
 			fn->fn_flags |= RTN_RTINFO;
 		}
+		fib6_purge_rt(iter, fn, info->nl_net);
+		rt6_release(iter);
 	}
 
 	return 0;
@@ -1322,24 +1346,7 @@ static void fib6_del_route(struct fib6_n
 		fn = fib6_repair_tree(net, fn);
 	}
 
-	if (atomic_read(&rt->rt6i_ref) != 1) {
-		/* This route is used as dummy address holder in some split
-		 * nodes. It is not leaked, but it still holds other resources,
-		 * which must be released in time. So, scan ascendant nodes
-		 * and replace dummy references to this route with references
-		 * to still alive ones.
-		 */
-		while (fn) {
-			if (!(fn->fn_flags & RTN_RTINFO) && fn->leaf == rt) {
-				fn->leaf = fib6_find_prefix(net, fn);
-				atomic_inc(&fn->leaf->rt6i_ref);
-				rt6_release(rt);
-			}
-			fn = fn->parent;
-		}
-		/* No more references are possible at this point. */
-		BUG_ON(atomic_read(&rt->rt6i_ref) != 1);
-	}
+	fib6_purge_rt(rt, fn, net);
 
 	inet6_rt_notify(RTM_DELROUTE, rt, info);
 	rt6_release(rt);

[PATCH 3.18 10/20] bnx2x: fix napi poll return value for repoll

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Govindarajulu Varadarajan <_govind@gmx.com>

[ Upstream commit 24e579c8898aa641ede3149234906982290934e5 ]

With the commit d75b1ade567ffab ("net: less interrupt masking in NAPI") napi
repoll is done only when work_done == budget. When in busy_poll is we return 0
in napi_poll. We should return budget.

Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -3175,7 +3175,7 @@ static int bnx2x_poll(struct napi_struct
 		}
 #endif
 		if (!bnx2x_fp_lock_napi(fp))
-			return work_done;
+			return budget;
 
 		for_each_cos_in_tx_queue(fp, cos)
 			if (bnx2x_tx_queue_has_work(fp->txdata_ptr[cos]))

[PATCH 3.18 11/20] net: dont OOPS on socket aio

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 06539d3071067ff146a9bffd1c801fa56d290909 ]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/socket.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/net/socket.c
+++ b/net/socket.c
@@ -892,9 +892,6 @@ static ssize_t sock_splice_read(struct f
 static struct sock_iocb *alloc_sock_iocb(struct kiocb *iocb,
 					 struct sock_iocb *siocb)
 {
-	if (!is_sync_kiocb(iocb))
-		BUG();
-
 	siocb->kiocb = iocb;
 	iocb->private = siocb;
 	return siocb;

[PATCH 3.18 12/20] bridge: dont send notification when skb->len == 0 in rtnl_bridge_notify

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roopa Prabhu <roopa@cumulusnetworks.com>

[ Upstream commit 59ccaaaa49b5b096cdc1f16706a9f931416b2332 ]

Reported in: https://bugzilla.kernel.org/show_bug.cgi?id=92081

This patch avoids calling rtnl_notify if the device ndo_bridge_getlink
handler does not return any bytes in the skb.

Alternately, the skb->len check can be moved inside rtnl_notify.

For the bridge vlan case described in 92081, there is also a fix needed
in bridge driver to generate a proper notification. Will fix that in
subsequent patch.

v2: rebase patch on net tree

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/rtnetlink.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2770,12 +2770,16 @@ static int rtnl_bridge_notify(struct net
 			goto errout;
 	}
 
+	if (!skb->len)
+		goto errout;
+
 	rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL, GFP_ATOMIC);
 	return 0;
 errout:
 	WARN_ON(err == -EMSGSIZE);
 	kfree_skb(skb);
-	rtnl_set_sk_err(net, RTNLGRP_LINK, err);
+	if (err)
+		rtnl_set_sk_err(net, RTNLGRP_LINK, err);
 	return err;
 }
 

[PATCH 3.18 13/20] tcp: ipv4: initialize unicast_sock sk_pacing_rate

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 811230cd853d62f09ed0addd0ce9a1b9b0e13fb5 ]

When I added sk_pacing_rate field, I forgot to initialize its value
in the per cpu unicast_sock used in ip_send_unicast_reply()

This means that for sch_fq users, RST packets, or ACK packets sent
on behalf of TIME_WAIT sockets might be sent to slowly or even dropped
once we reach the per flow limit.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 95bd09eb2750 ("tcp: TSO packets automatic sizing")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_output.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -1517,6 +1517,7 @@ static DEFINE_PER_CPU(struct inet_sock,
 		.sk_wmem_alloc	= ATOMIC_INIT(1),
 		.sk_allocation	= GFP_ATOMIC,
 		.sk_flags	= (1UL << SOCK_USE_WRITE_QUEUE),
+		.sk_pacing_rate = ~0U,
 	},
 	.pmtudisc	= IP_PMTUDISC_WANT,
 	.uc_ttl		= -1,

[PATCH 3.18 14/20] ipv4: tcp: get rid of ugly unicast_sock

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit bdbbb8527b6f6a358dbcb70dac247034d665b8e4 ]

In commit be9f4a44e7d41 ("ipv4: tcp: remove per net tcp_sock")
I tried to address contention on a socket lock, but the solution
I chose was horrible :

commit 3a7c384ffd57e ("ipv4: tcp: unicast_sock should not land outside
of TCP stack") addressed a selinux regression.

commit 0980e56e506b ("ipv4: tcp: set unicast_sock uc_ttl to -1")
took care of another regression.

commit b5ec8eeac46 ("ipv4: fix ip_send_skb()") fixed another regression.

commit 811230cd85 ("tcp: ipv4: initialize unicast_sock sk_pacing_rate")
was another shot in the dark.

Really, just use a proper socket per cpu, and remove the skb_orphan()
call, to re-enable flow control.

This solves a serious problem with FQ packet scheduler when used in
hostile environments, as we do not want to allocate a flow structure
for every RST packet sent in response to a spoofed packet.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ip.h         |    2 +-
 include/net/netns/ipv4.h |    1 +
 net/ipv4/ip_output.c     |   30 +++---------------------------
 net/ipv4/tcp_ipv4.c      |   37 ++++++++++++++++++++++++++++++++-----
 4 files changed, 37 insertions(+), 33 deletions(-)

--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -181,7 +181,7 @@ static inline __u8 ip_reply_arg_flowi_fl
 	return (arg->flags & IP_REPLY_ARG_NOSRCCHECK) ? FLOWI_FLAG_ANYSRC : 0;
 }
 
-void ip_send_unicast_reply(struct net *net, struct sk_buff *skb,
+void ip_send_unicast_reply(struct sock *sk, struct sk_buff *skb,
 			   const struct ip_options *sopt,
 			   __be32 daddr, __be32 saddr,
 			   const struct ip_reply_arg *arg,
--- a/include/net/netns/ipv4.h
+++ b/include/net/netns/ipv4.h
@@ -52,6 +52,7 @@ struct netns_ipv4 {
 	struct inet_peer_base	*peers;
 	struct tcpm_hash_bucket	*tcp_metrics_hash;
 	unsigned int		tcp_metrics_hash_log;
+	struct sock  * __percpu	*tcp_sk;
 	struct netns_frags	frags;
 #ifdef CONFIG_NETFILTER
 	struct xt_table		*iptable_filter;
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -1506,24 +1506,8 @@ static int ip_reply_glue_bits(void *dptr
 /*
  *	Generic function to send a packet as reply to another packet.
  *	Used to send some TCP resets/acks so far.
- *
- *	Use a fake percpu inet socket to avoid false sharing and contention.
  */
-static DEFINE_PER_CPU(struct inet_sock, unicast_sock) = {
-	.sk = {
-		.__sk_common = {
-			.skc_refcnt = ATOMIC_INIT(1),
-		},
-		.sk_wmem_alloc	= ATOMIC_INIT(1),
-		.sk_allocation	= GFP_ATOMIC,
-		.sk_flags	= (1UL << SOCK_USE_WRITE_QUEUE),
-		.sk_pacing_rate = ~0U,
-	},
-	.pmtudisc	= IP_PMTUDISC_WANT,
-	.uc_ttl		= -1,
-};
-
-void ip_send_unicast_reply(struct net *net, struct sk_buff *skb,
+void ip_send_unicast_reply(struct sock *sk, struct sk_buff *skb,
 			   const struct ip_options *sopt,
 			   __be32 daddr, __be32 saddr,
 			   const struct ip_reply_arg *arg,
@@ -1533,9 +1517,8 @@ void ip_send_unicast_reply(struct net *n
 	struct ipcm_cookie ipc;
 	struct flowi4 fl4;
 	struct rtable *rt = skb_rtable(skb);
+	struct net *net = sock_net(sk);
 	struct sk_buff *nskb;
-	struct sock *sk;
-	struct inet_sock *inet;
 	int err;
 
 	if (__ip_options_echo(&replyopts.opt.opt, skb, sopt))
@@ -1566,15 +1549,11 @@ void ip_send_unicast_reply(struct net *n
 	if (IS_ERR(rt))
 		return;
 
-	inet = &get_cpu_var(unicast_sock);
+	inet_sk(sk)->tos = arg->tos;
 
-	inet->tos = arg->tos;
-	sk = &inet->sk;
 	sk->sk_priority = skb->priority;
 	sk->sk_protocol = ip_hdr(skb)->protocol;
 	sk->sk_bound_dev_if = arg->bound_dev_if;
-	sock_net_set(sk, net);
-	__skb_queue_head_init(&sk->sk_write_queue);
 	sk->sk_sndbuf = sysctl_wmem_default;
 	err = ip_append_data(sk, &fl4, ip_reply_glue_bits, arg->iov->iov_base,
 			     len, 0, &ipc, &rt, MSG_DONTWAIT);
@@ -1590,13 +1569,10 @@ void ip_send_unicast_reply(struct net *n
 			  arg->csumoffset) = csum_fold(csum_add(nskb->csum,
 								arg->csum));
 		nskb->ip_summed = CHECKSUM_NONE;
-		skb_orphan(nskb);
 		skb_set_queue_mapping(nskb, skb_get_queue_mapping(skb));
 		ip_push_pending_frames(sk, &fl4);
 	}
 out:
-	put_cpu_var(unicast_sock);
-
 	ip_rt_put(rt);
 }
 
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -683,7 +683,8 @@ static void tcp_v4_send_reset(struct soc
 		arg.bound_dev_if = sk->sk_bound_dev_if;
 
 	arg.tos = ip_hdr(skb)->tos;
-	ip_send_unicast_reply(net, skb, &TCP_SKB_CB(skb)->header.h4.opt,
+	ip_send_unicast_reply(*this_cpu_ptr(net->ipv4.tcp_sk),
+			      skb, &TCP_SKB_CB(skb)->header.h4.opt,
 			      ip_hdr(skb)->saddr, ip_hdr(skb)->daddr,
 			      &arg, arg.iov[0].iov_len);
 
@@ -767,7 +768,8 @@ static void tcp_v4_send_ack(struct sk_bu
 	if (oif)
 		arg.bound_dev_if = oif;
 	arg.tos = tos;
-	ip_send_unicast_reply(net, skb, &TCP_SKB_CB(skb)->header.h4.opt,
+	ip_send_unicast_reply(*this_cpu_ptr(net->ipv4.tcp_sk),
+			      skb, &TCP_SKB_CB(skb)->header.h4.opt,
 			      ip_hdr(skb)->saddr, ip_hdr(skb)->daddr,
 			      &arg, arg.iov[0].iov_len);
 
@@ -2426,14 +2428,39 @@ struct proto tcp_prot = {
 };
 EXPORT_SYMBOL(tcp_prot);
 
+static void __net_exit tcp_sk_exit(struct net *net)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu)
+		inet_ctl_sock_destroy(*per_cpu_ptr(net->ipv4.tcp_sk, cpu));
+	free_percpu(net->ipv4.tcp_sk);
+}
+
 static int __net_init tcp_sk_init(struct net *net)
 {
+	int res, cpu;
+
+	net->ipv4.tcp_sk = alloc_percpu(struct sock *);
+	if (!net->ipv4.tcp_sk)
+		return -ENOMEM;
+
+	for_each_possible_cpu(cpu) {
+		struct sock *sk;
+
+		res = inet_ctl_sock_create(&sk, PF_INET, SOCK_RAW,
+					   IPPROTO_TCP, net);
+		if (res)
+			goto fail;
+		*per_cpu_ptr(net->ipv4.tcp_sk, cpu) = sk;
+	}
 	net->ipv4.sysctl_tcp_ecn = 2;
 	return 0;
-}
 
-static void __net_exit tcp_sk_exit(struct net *net)
-{
+fail:
+	tcp_sk_exit(net);
+
+	return res;
 }
 
 static void __net_exit tcp_sk_exit_batch(struct list_head *net_exit_list)

[PATCH 3.18 15/20] ppp: deflate: never return len larger than output buffer

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

[ Upstream commit e2a4800e75780ccf4e6c2487f82b688ba736eb18 ]

When we've run out of space in the output buffer to store more data, we
will call zlib_deflate with a NULL output buffer until we've consumed
remaining input.

When this happens, olen contains the size the output buffer would have
consumed iff we'd have had enough room.

This can later cause skb_over_panic when ppp_generic skb_put()s
the returned length.

Reported-by: Iain Douglas <centos@1n6.org.uk>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ppp/ppp_deflate.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ppp/ppp_deflate.c
+++ b/drivers/net/ppp/ppp_deflate.c
@@ -246,7 +246,7 @@ static int z_compress(void *arg, unsigne
 	/*
 	 * See if we managed to reduce the size of the packet.
 	 */
-	if (olen < isize) {
+	if (olen < isize && olen <= osize) {
 		state->stats.comp_bytes += olen;
 		state->stats.comp_packets++;
 	} else {

[PATCH 3.18 16/20] net: sctp: fix passing wrong parameter header to param_type2af in sctp_process_param

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Saran Maruti Ramanara <saran.neti@telus.com>

[ Upstream commit cfbf654efc6d78dc9812e030673b86f235bf677d ]

When making use of RFC5061, section 4.2.4. for setting the primary IP
address, we're passing a wrong parameter header to param_type2af(),
resulting always in NULL being returned.

At this point, param.p points to a sctp_addip_param struct, containing
a sctp_paramhdr (type = 0xc004, length = var), and crr_id as a correlation
id. Followed by that, as also presented in RFC5061 section 4.2.4., comes
the actual sctp_addr_param, which also contains a sctp_paramhdr, but
this time with the correct type SCTP_PARAM_IPV{4,6}_ADDRESS that
param_type2af() can make use of. Since we already hold a pointer to
addr_param from previous line, just reuse it for param_type2af().

Fixes: d6de3097592b ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT")
Signed-off-by: Saran Maruti Ramanara <saran.neti@telus.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/sm_make_chunk.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2608,7 +2608,7 @@ do_addr_param:
 
 		addr_param = param.v + sizeof(sctp_addip_param_t);
 
-		af = sctp_get_af_specific(param_type2af(param.p->type));
+		af = sctp_get_af_specific(param_type2af(addr_param->p.type));
 		if (af == NULL)
 			break;
 

[PATCH 3.18 17/20] hyperv: Fix the error processing in netvsc_send()

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Upstream commit d953ca4ddf71aa91a4596b2ff7ff1598f6ad4708 ]

The existing code frees the skb in EAGAIN case, in which the skb will be
retried from upper layer and used again.
Also, the existing code doesn't free send buffer slot in error case, because
there is no completion message for unsent packets.
This patch fixes these problems.

(Please also include this patch for stable trees. Thanks!)

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -716,7 +716,7 @@ int netvsc_send(struct hv_device *device
 	u64 req_id;
 	unsigned int section_index = NETVSC_INVALID_INDEX;
 	u32 msg_size = 0;
-	struct sk_buff *skb;
+	struct sk_buff *skb = NULL;
 	u16 q_idx = packet->q_idx;
 
 
@@ -743,8 +743,6 @@ int netvsc_send(struct hv_device *device
 							   packet);
 			skb = (struct sk_buff *)
 			      (unsigned long)packet->send_completion_tid;
-			if (skb)
-				dev_kfree_skb_any(skb);
 			packet->page_buf_cnt = 0;
 		}
 	}
@@ -807,6 +805,13 @@ int netvsc_send(struct hv_device *device
 			   packet, ret);
 	}
 
+	if (ret != 0) {
+		if (section_index != NETVSC_INVALID_INDEX)
+			netvsc_free_send_slot(net_device, section_index);
+	} else if (skb) {
+		dev_kfree_skb_any(skb);
+	}
+
 	return ret;
 }
 

[PATCH 3.18 18/20] net: sched: fix panic in rate estimators

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 0d32ef8cef9aa8f375e128f78b77caceaa7e8da0 ]

Doing the following commands on a non idle network device
panics the box instantly, because cpu_bstats gets overwritten
by stats.

tc qdisc add dev eth0 root <your_favorite_qdisc>
... some traffic (one packet is enough) ...
tc qdisc replace dev eth0 root est 1sec 4sec <your_favorite_qdisc>

[  325.355596] BUG: unable to handle kernel paging request at ffff8841dc5a074c
[  325.362609] IP: [<ffffffff81541c9e>] __gnet_stats_copy_basic+0x3e/0x90
[  325.369158] PGD 1fa7067 PUD 0
[  325.372254] Oops: 0000 [#1] SMP
[  325.375514] Modules linked in: ...
[  325.398346] CPU: 13 PID: 14313 Comm: tc Not tainted 3.19.0-smp-DEV #1163
[  325.412042] task: ffff8800793ab5d0 ti: ffff881ff2fa4000 task.ti: ffff881ff2fa4000
[  325.419518] RIP: 0010:[<ffffffff81541c9e>]  [<ffffffff81541c9e>] __gnet_stats_copy_basic+0x3e/0x90
[  325.428506] RSP: 0018:ffff881ff2fa7928  EFLAGS: 00010286
[  325.433824] RAX: 000000000000000c RBX: ffff881ff2fa796c RCX: 000000000000000c
[  325.440988] RDX: ffff8841dc5a0744 RSI: 0000000000000060 RDI: 0000000000000060
[  325.448120] RBP: ffff881ff2fa7948 R08: ffffffff81cd4f80 R09: 0000000000000000
[  325.455268] R10: ffff883ff223e400 R11: 0000000000000000 R12: 000000015cba0744
[  325.462405] R13: ffffffff81cd4f80 R14: ffff883ff223e460 R15: ffff883feea0722c
[  325.469536] FS:  00007f2ee30fa700(0000) GS:ffff88407fa20000(0000) knlGS:0000000000000000
[  325.477630] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  325.483380] CR2: ffff8841dc5a074c CR3: 0000003feeae9000 CR4: 00000000001407e0
[  325.490510] Stack:
[  325.492524]  ffff883feea0722c ffff883fef719dc0 ffff883feea0722c ffff883ff223e4a0
[  325.499990]  ffff881ff2fa79a8 ffffffff815424ee ffff883ff223e49c 000000015cba0744
[  325.507460]  00000000f2fa7978 0000000000000000 ffff881ff2fa79a8 ffff883ff223e4a0
[  325.514956] Call Trace:
[  325.517412]  [<ffffffff815424ee>] gen_new_estimator+0x8e/0x230
[  325.523250]  [<ffffffff815427aa>] gen_replace_estimator+0x4a/0x60
[  325.529349]  [<ffffffff815718ab>] tc_modify_qdisc+0x52b/0x590
[  325.535117]  [<ffffffff8155edd0>] rtnetlink_rcv_msg+0xa0/0x240
[  325.540963]  [<ffffffff8155ed30>] ? __rtnl_unlock+0x20/0x20
[  325.546532]  [<ffffffff8157f811>] netlink_rcv_skb+0xb1/0xc0
[  325.552145]  [<ffffffff8155b355>] rtnetlink_rcv+0x25/0x40
[  325.557558]  [<ffffffff8157f0d8>] netlink_unicast+0x168/0x220
[  325.563317]  [<ffffffff8157f47c>] netlink_sendmsg+0x2ec/0x3e0

Lets play safe and not use an union : percpu 'pointers' are mostly read
anyway, and we have typically few qdiscs per host.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Fixes: 22e0f8b9322c ("net: sched: make bstats per cpu and estimator RCU safe")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/sch_generic.h |   13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -79,6 +79,9 @@ struct Qdisc {
 	struct netdev_queue	*dev_queue;
 
 	struct gnet_stats_rate_est64	rate_est;
+	struct gnet_stats_basic_cpu __percpu *cpu_bstats;
+	struct gnet_stats_queue	__percpu *cpu_qstats;
+
 	struct Qdisc		*next_sched;
 	struct sk_buff		*gso_skb;
 	/*
@@ -86,15 +89,9 @@ struct Qdisc {
 	 */
 	unsigned long		state;
 	struct sk_buff_head	q;
-	union {
-		struct gnet_stats_basic_packed bstats;
-		struct gnet_stats_basic_cpu __percpu *cpu_bstats;
-	} __packed;
+	struct gnet_stats_basic_packed bstats;
 	unsigned int		__state;
-	union {
-		struct gnet_stats_queue	qstats;
-		struct gnet_stats_queue	__percpu *cpu_qstats;
-	} __packed;
+	struct gnet_stats_queue	qstats;
 	struct rcu_head		rcu_head;
 	int			padded;
 	atomic_t		refcnt;

[PATCH 3.18 20/20] [media] media/rc: Send sync space information on the lirc device

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Austin Lund <austin.lund@gmail.com>

commit a8f29e89f2b54fbf2c52be341f149bc195b63a8b upstream.

Userspace expects to see a long space before the first pulse is sent on
the lirc device.  Currently, if a long time has passed and a new packet
is started, the lirc codec just returns and doesn't send anything.  This
makes lircd ignore many perfectly valid signals unless they are sent in
quick sucession.  When a reset event is delivered, we cannot know
anything about the duration of the space.  But it should be safe to
assume it has been a long time and we just set the duration to maximum.

Signed-off-by: Austin Lund <austin.lund@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/rc/ir-lirc-codec.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -42,11 +42,17 @@ static int ir_lirc_decode(struct rc_dev
 		return -EINVAL;
 
 	/* Packet start */
-	if (ev.reset)
-		return 0;
+	if (ev.reset) {
+		/* Userspace expects a long space event before the start of
+		 * the signal to use as a sync.  This may be done with repeat
+		 * packets and normal samples.  But if a reset has been sent
+		 * then we assume that a long time has passed, so we send a
+		 * space with the maximum time value. */
+		sample = LIRC_SPACE(LIRC_VALUE_MASK);
+		IR_dprintk(2, "delivering reset sync space to lirc_dev\n");
 
 	/* Carrier reports */
-	if (ev.carrier_report) {
+	} else if (ev.carrier_report) {
 		sample = LIRC_FREQUENCY(ev.carrier);
 		IR_dprintk(2, "carrier report (freq: %d)\n", sample);
 

Re: [PATCH 3.18 00/20] 3.18.8-stable review

[Guenter Roeck]

On Tue, Feb 24, 2015 at 06:10:15PM -0800, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.8 release.
> There are 20 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri Feb 27 02:08:41 UTC 2015.
> Anything received after that time might be too late.
> 
Build results:
	total: 121 pass: 121 fail: 0
Qemu tests:
	total: 30 pass: 30 fail: 0

Details are available at http://server.roeck-us.net:8010/builders.

Guenter

Re: [PATCH 3.18 00/20] 3.18.8-stable review

[Greg Kroah-Hartman]

On Wed, Feb 25, 2015 at 08:46:29AM -0800, Guenter Roeck wrote:
> On Tue, Feb 24, 2015 at 06:10:15PM -0800, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.18.8 release.
> > There are 20 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Fri Feb 27 02:08:41 UTC 2015.
> > Anything received after that time might be too late.
> > 
> Build results:
> 	total: 121 pass: 121 fail: 0
> Qemu tests:
> 	total: 30 pass: 30 fail: 0
> 
> Details are available at http://server.roeck-us.net:8010/builders.
> 
> Guenter

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 3.18 00/20] 3.18.8-stable review

[Shuah Khan]

On 02/24/2015 07:10 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.8 release.
> There are 20 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri Feb 27 02:08:41 UTC 2015.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.18.8-rc1.gz
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

-- 
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978

Re: [PATCH 3.18 00/20] 3.18.8-stable review

[Greg Kroah-Hartman]

On Wed, Feb 25, 2015 at 01:56:08PM -0700, Shuah Khan wrote:
> On 02/24/2015 07:10 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.18.8 release.
> > There are 20 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Fri Feb 27 02:08:41 UTC 2015.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.18.8-rc1.gz
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Compiled and booted on my test system. No dmesg regressions.

Thanks for testing these and letting me know.

greg k-h