[PATCH 4.0 18/22] ARM: EXYNOS: Fix failed second suspend on Exynos4

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

4.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <k.kozlowski@samsung.com>

commit 6f024978e74bda616b27183adee029b65eb27032 upstream.

On Exynos4412 boards (Trats2, Odroid U3) after enabling L2 cache in
56b60b8bce4a ("ARM: 8265/1: dts: exynos4: Add nodes for L2 cache
controller") the second suspend to RAM failed. First suspend worked fine
but the next one hang just after powering down of secondary CPUs (system
consumed energy as it would be running but was not responsive).

The issue was caused by enabling delayed reset assertion for CPU0 just
after issuing power down of cores. This was introduced for Exynos4 in
13cfa6c4f7fa ("ARM: EXYNOS: Fix CPU idle clock down after CPU off").

The whole behavior is not well documented but after checking with vendor
code this should be done like this (on Exynos4):
1. Enable delayed reset assertion when system is running (for all CPUs).
2. Disable delayed reset assertion before suspending the system.
   This can be done after powering off secondary CPUs.
3. Re-enable the delayed reset assertion when system is resumed.

Fixes: 13cfa6c4f7fa ("ARM: EXYNOS: Fix CPU idle clock down after CPU off")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-exynos/common.h  |    2 ++
 arch/arm/mach-exynos/exynos.c  |   27 +++++++++++++++++++++++++++
 arch/arm/mach-exynos/platsmp.c |   39 ++-------------------------------------
 arch/arm/mach-exynos/suspend.c |    3 +++
 4 files changed, 34 insertions(+), 37 deletions(-)

--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -153,6 +153,8 @@ extern void exynos_enter_aftr(void);
 
 extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
 
+extern void exynos_set_delayed_reset_assertion(bool enable);
+
 extern void s5p_init_cpu(void __iomem *cpuid_addr);
 extern unsigned int samsung_rev(void);
 extern void __iomem *cpu_boot_reg_base(void);
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -166,6 +166,33 @@ static void __init exynos_init_io(void)
 	exynos_map_io();
 }
 
+/*
+ * Set or clear the USE_DELAYED_RESET_ASSERTION option. Used by smp code
+ * and suspend.
+ *
+ * This is necessary only on Exynos4 SoCs. When system is running
+ * USE_DELAYED_RESET_ASSERTION should be set so the ARM CLK clock down
+ * feature could properly detect global idle state when secondary CPU is
+ * powered down.
+ *
+ * However this should not be set when such system is going into suspend.
+ */
+void exynos_set_delayed_reset_assertion(bool enable)
+{
+	if (soc_is_exynos4()) {
+		unsigned int tmp, core_id;
+
+		for (core_id = 0; core_id < num_possible_cpus(); core_id++) {
+			tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
+			if (enable)
+				tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
+			else
+				tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
+			pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
+		}
+	}
+}
+
 static const struct of_device_id exynos_dt_pmu_match[] = {
 	{ .compatible = "samsung,exynos3250-pmu" },
 	{ .compatible = "samsung,exynos4210-pmu" },
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -34,30 +34,6 @@
 
 extern void exynos4_secondary_startup(void);
 
-/*
- * Set or clear the USE_DELAYED_RESET_ASSERTION option, set on Exynos4 SoCs
- * during hot-(un)plugging CPUx.
- *
- * The feature can be cleared safely during first boot of secondary CPU.
- *
- * Exynos4 SoCs require setting USE_DELAYED_RESET_ASSERTION during powering
- * down a CPU so the CPU idle clock down feature could properly detect global
- * idle state when CPUx is off.
- */
-static void exynos_set_delayed_reset_assertion(u32 core_id, bool enable)
-{
-	if (soc_is_exynos4()) {
-		unsigned int tmp;
-
-		tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
-		if (enable)
-			tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
-		else
-			tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
-		pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
-	}
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
 static inline void cpu_leave_lowpower(u32 core_id)
 {
@@ -73,8 +49,6 @@ static inline void cpu_leave_lowpower(u3
 	  : "=&r" (v)
 	  : "Ir" (CR_C), "Ir" (0x40)
 	  : "cc");
-
-	 exynos_set_delayed_reset_assertion(core_id, false);
 }
 
 static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
@@ -87,14 +61,6 @@ static inline void platform_do_lowpower(
 		/* Turn the CPU off on next WFI instruction. */
 		exynos_cpu_power_down(core_id);
 
-		/*
-		 * Exynos4 SoCs require setting
-		 * USE_DELAYED_RESET_ASSERTION so the CPU idle
-		 * clock down feature could properly detect
-		 * global idle state when CPUx is off.
-		 */
-		exynos_set_delayed_reset_assertion(core_id, true);
-
 		wfi();
 
 		if (pen_release == core_id) {
@@ -354,9 +320,6 @@ static int exynos_boot_secondary(unsigne
 		udelay(10);
 	}
 
-	/* No harm if this is called during first boot of secondary CPU */
-	exynos_set_delayed_reset_assertion(core_id, false);
-
 	/*
 	 * now the secondary core is starting up let it run its
 	 * calibrations, then wait for it to finish
@@ -403,6 +366,8 @@ static void __init exynos_smp_prepare_cp
 
 	exynos_sysram_init();
 
+	exynos_set_delayed_reset_assertion(true);
+
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
 		scu_enable(scu_base_addr());
 
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -235,6 +235,8 @@ static void exynos_pm_enter_sleep_mode(v
 
 static void exynos_pm_prepare(void)
 {
+	exynos_set_delayed_reset_assertion(false);
+
 	/* Set wake-up mask registers */
 	exynos_pm_set_wakeup_mask();
 
@@ -383,6 +385,7 @@ early_wakeup:
 
 	/* Clear SLEEP mode set in INFORM1 */
 	pmu_raw_writel(0x0, S5P_INFORM1);
+	exynos_set_delayed_reset_assertion(true);
 }
 
 static void exynos3250_pm_resume(void)