From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH 3.10 17/89] pinctrl: mvebu: armada-xp: remove non-existing VDD cpu_pd functions
Date: Fri, 31 Jul 2015 12:40:59 -0700 [thread overview]
Message-ID: <20150731194031.160294379@linuxfoundation.org> (raw)
In-Reply-To: <20150731194030.516335023@linuxfoundation.org>
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
commit 80b3d04feab5e69d51cb2375eb989a7165e43e3b upstream.
The latest version of the Armada XP datasheet no longer documents the
VDD cpu_pd functions, which might indicate they are not working and/or
not supported. This commit ensures the pinctrl driver matches the
datasheet.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes: 463e270f766a ("pinctrl: mvebu: add pinctrl driver for Armada XP")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt | 26 +++----
drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 33 +++-------
2 files changed, 20 insertions(+), 39 deletions(-)
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
@@ -43,13 +43,13 @@ mpp22 22 gpio, ge0(rxd6),
mpp23 23 gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
mpp24 24 gpio, lcd(hsync), sata1(prsnt), tdm(rst)
mpp25 25 gpio, lcd(vsync), sata0(prsnt), tdm(pclk)
-mpp26 26 gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd)
+mpp26 26 gpio, lcd(clk), tdm(fsync)
mpp27 27 gpio, lcd(e), tdm(dtx), ptp(trig)
mpp28 28 gpio, lcd(pwm), tdm(drx), ptp(evreq)
-mpp29 29 gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd)
+mpp29 29 gpio, lcd(ref-clk), tdm(int0), ptp(clk)
mpp30 30 gpio, tdm(int1), sd0(clk)
-mpp31 31 gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd)
-mpp32 32 gpio, tdm(int3), sd0(d0), vdd(cpu1-pd)
+mpp31 31 gpio, tdm(int2), sd0(cmd)
+mpp32 32 gpio, tdm(int3), sd0(d0)
mpp33 33 gpio, tdm(int4), sd0(d1), mem(bat)
mpp34 34 gpio, tdm(int5), sd0(d2), sata0(prsnt)
mpp35 35 gpio, tdm(int6), sd0(d3), sata1(prsnt)
@@ -57,14 +57,11 @@ mpp36 36 gpio, spi(mosi)
mpp37 37 gpio, spi(miso)
mpp38 38 gpio, spi(sck)
mpp39 39 gpio, spi(cs0)
-mpp40 40 gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd),
- pcie(clkreq0)
+mpp40 40 gpio, spi(cs1), uart2(cts), lcd(vga-hsync), pcie(clkreq0)
mpp41 41 gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
pcie(clkreq1)
-mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer),
- vdd(cpu0-pd)
-mpp43 43 gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout),
- vdd(cpu2-3-pd){1}
+mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer)
+mpp43 43 gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout)
mpp44 44 gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2),
mem(bat)
mpp45 45 gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt)
@@ -83,9 +80,9 @@ mpp51 51 gpio, dev(ad16)
mpp52 52 gpio, dev(ad17)
mpp53 53 gpio, dev(ad18)
mpp54 54 gpio, dev(ad19)
-mpp55 55 gpio, dev(ad20), vdd(cpu0-pd)
-mpp56 56 gpio, dev(ad21), vdd(cpu1-pd)
-mpp57 57 gpio, dev(ad22), vdd(cpu2-3-pd){1}
+mpp55 55 gpio, dev(ad20)
+mpp56 56 gpio, dev(ad21)
+mpp57 57 gpio, dev(ad22)
mpp58 58 gpio, dev(ad23)
mpp59 59 gpio, dev(ad24)
mpp60 60 gpio, dev(ad25)
@@ -95,6 +92,3 @@ mpp63 63 gpio, dev(ad28)
mpp64 64 gpio, dev(ad29)
mpp65 65 gpio, dev(ad30)
mpp66 66 gpio, dev(ad31)
-
-Notes:
-* {1} vdd(cpu2-3-pd) only available on mv78460.
--- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
@@ -14,10 +14,7 @@
* available: mv78230, mv78260 and mv78460. From a pin muxing
* perspective, the mv78230 has 49 MPP pins. The mv78260 and mv78460
* both have 67 MPP pins (more GPIOs and address lines for the memory
- * bus mainly). The only difference between the mv78260 and the
- * mv78460 in terms of pin muxing is the addition of two functions on
- * pins 43 and 56 to access the VDD of the CPU2 and 3 (mv78260 has two
- * cores, mv78460 has four cores).
+ * bus mainly).
*/
#include <linux/err.h>
@@ -169,8 +166,7 @@ static struct mvebu_mpp_mode armada_xp_m
MPP_MODE(26,
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x3, "tdm", "fsync", V_MV78230_PLUS),
- MPP_VAR_FUNCTION(0x4, "lcd", "clk", V_MV78230_PLUS),
- MPP_VAR_FUNCTION(0x5, "vdd", "cpu1-pd", V_MV78230_PLUS)),
+ MPP_VAR_FUNCTION(0x4, "lcd", "clk", V_MV78230_PLUS)),
MPP_MODE(27,
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x1, "ptp", "trig", V_MV78230_PLUS),
@@ -185,8 +181,7 @@ static struct mvebu_mpp_mode armada_xp_m
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x1, "ptp", "clk", V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x3, "tdm", "int0", V_MV78230_PLUS),
- MPP_VAR_FUNCTION(0x4, "lcd", "ref-clk", V_MV78230_PLUS),
- MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd", V_MV78230_PLUS)),
+ MPP_VAR_FUNCTION(0x4, "lcd", "ref-clk", V_MV78230_PLUS)),
MPP_MODE(30,
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x1, "sd0", "clk", V_MV78230_PLUS),
@@ -194,13 +189,11 @@ static struct mvebu_mpp_mode armada_xp_m
MPP_MODE(31,
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x1, "sd0", "cmd", V_MV78230_PLUS),
- MPP_VAR_FUNCTION(0x3, "tdm", "int2", V_MV78230_PLUS),
- MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd", V_MV78230_PLUS)),
+ MPP_VAR_FUNCTION(0x3, "tdm", "int2", V_MV78230_PLUS)),
MPP_MODE(32,
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x1, "sd0", "d0", V_MV78230_PLUS),
- MPP_VAR_FUNCTION(0x3, "tdm", "int3", V_MV78230_PLUS),
- MPP_VAR_FUNCTION(0x5, "vdd", "cpu1-pd", V_MV78230_PLUS)),
+ MPP_VAR_FUNCTION(0x3, "tdm", "int3", V_MV78230_PLUS)),
MPP_MODE(33,
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x1, "sd0", "d1", V_MV78230_PLUS),
@@ -232,7 +225,6 @@ static struct mvebu_mpp_mode armada_xp_m
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x1, "spi", "cs1", V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x2, "uart2", "cts", V_MV78230_PLUS),
- MPP_VAR_FUNCTION(0x3, "vdd", "cpu1-pd", V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x4, "lcd", "vga-hsync", V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x5, "pcie", "clkreq0", V_MV78230_PLUS)),
MPP_MODE(41,
@@ -247,15 +239,13 @@ static struct mvebu_mpp_mode armada_xp_m
MPP_VAR_FUNCTION(0x1, "uart2", "rxd", V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x2, "uart0", "cts", V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x3, "tdm", "int7", V_MV78230_PLUS),
- MPP_VAR_FUNCTION(0x4, "tdm-1", "timer", V_MV78230_PLUS),
- MPP_VAR_FUNCTION(0x5, "vdd", "cpu0-pd", V_MV78230_PLUS)),
+ MPP_VAR_FUNCTION(0x4, "tdm-1", "timer", V_MV78230_PLUS)),
MPP_MODE(43,
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x1, "uart2", "txd", V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x2, "uart0", "rts", V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x3, "spi", "cs3", V_MV78230_PLUS),
- MPP_VAR_FUNCTION(0x4, "pcie", "rstout", V_MV78230_PLUS),
- MPP_VAR_FUNCTION(0x5, "vdd", "cpu2-3-pd", V_MV78460)),
+ MPP_VAR_FUNCTION(0x4, "pcie", "rstout", V_MV78230_PLUS)),
MPP_MODE(44,
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78230_PLUS),
MPP_VAR_FUNCTION(0x1, "uart2", "cts", V_MV78230_PLUS),
@@ -306,16 +296,13 @@ static struct mvebu_mpp_mode armada_xp_m
MPP_VAR_FUNCTION(0x1, "dev", "ad19", V_MV78260_PLUS)),
MPP_MODE(55,
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
- MPP_VAR_FUNCTION(0x1, "dev", "ad20", V_MV78260_PLUS),
- MPP_VAR_FUNCTION(0x2, "vdd", "cpu0-pd", V_MV78260_PLUS)),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad20", V_MV78260_PLUS)),
MPP_MODE(56,
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
- MPP_VAR_FUNCTION(0x1, "dev", "ad21", V_MV78260_PLUS),
- MPP_VAR_FUNCTION(0x2, "vdd", "cpu1-pd", V_MV78260_PLUS)),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad21", V_MV78260_PLUS)),
MPP_MODE(57,
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
- MPP_VAR_FUNCTION(0x1, "dev", "ad22", V_MV78260_PLUS),
- MPP_VAR_FUNCTION(0x2, "vdd", "cpu2-3-pd", V_MV78460)),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad22", V_MV78260_PLUS)),
MPP_MODE(58,
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_MV78260_PLUS),
MPP_VAR_FUNCTION(0x1, "dev", "ad23", V_MV78260_PLUS)),
next prev parent reply other threads:[~2015-07-31 20:19 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-31 19:40 [PATCH 3.10 00/89] 3.10.85-stable review Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 01/89] ipr: Increase default adapter init stage change timeout Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 02/89] Disable write buffering on Toshiba ToPIC95 Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 03/89] ALSA: hda - Add headset support to Acer Aspire V5 Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 04/89] ALSA: hda - Fix the dock headphone output on Fujitsu Lifebook E780 Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 05/89] ARC: add compiler barrier to LLSC based cmpxchg Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 06/89] arm64: Do not attempt to use init_mm in reset_context() Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 07/89] arm64: mm: Fix freeing of the wrong memmap entries with !SPARSEMEM_VMEMMAP Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 08/89] arm64: vdso: work-around broken ELF toolchains in Makefile Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 09/89] cpuidle / menu: Return (-1) if there are no suitable states Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 10/89] regmap: Fix regmap_bulk_read in BE mode Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 11/89] regulator: core: fix constraints output buffer Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 12/89] spi: pl022: Specify num-cs property as required in devicetree binding Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 13/89] mtd: fix: avoid race condition when accessing mtd->usecount Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 15/89] pinctrl: mvebu: armada-370: fix spi0 pin description Greg Kroah-Hartman
2015-07-31 19:40 ` [PATCH 3.10 16/89] pinctrl: mvebu: armada-xp: remove non-existing NAND pins Greg Kroah-Hartman
2015-07-31 19:40 ` Greg Kroah-Hartman [this message]
2015-07-31 19:41 ` [PATCH 3.10 18/89] pinctrl: mvebu: armada-xp: fix functions of MPP48 Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 19/89] Bluetooth: btusb: Fix memory leak in Intel setup routine Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 20/89] ath9k: fix DMA stop sequence for AR9003+ Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 21/89] staging: rtl8712: prevent buffer overrun in recvbuf2recvframe Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 22/89] ext4: fix race between truncate and __ext4_journalled_writepage() Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 23/89] ext4: call sync_blockdev() before invalidate_bdev() in put_super() Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 24/89] ext4: dont retry file block mapping on bigalloc fs with non-extent file Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 25/89] ext4: fix reservation release on invalidatepage for delalloc fs Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 26/89] ext4: be more strict when migrating to non-extent based file Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 27/89] ext4: correctly migrate a file with a hole at the beginning Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 28/89] ext4: replace open coded nofail allocation in ext4_free_blocks() Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 29/89] jbd2: use GFP_NOFS in jbd2_cleanup_journal_tail() Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 30/89] jbd2: fix ocfs2 corrupt when updating journal superblock fails Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 31/89] i2c: at91: fix a race condition when using the DMA controller Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 32/89] iio: DAC: ad5624r_spi: fix bit shift of output data value Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 33/89] [media] af9013: Dont accept invalid bandwidth Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 34/89] [media] s5h1420: fix a buffer overflow when checking userspace params Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 35/89] [media] cx24116: " Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 37/89] ASoC: wm8955: Fix setting wrong register for WM8955_K_8_0_MASK bits Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 39/89] ASoC: wm8960: the enum of "DAC Polarity" should be wm8960_enum[1] Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 40/89] libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 41/89] libata: increase the timeout when setting transfer mode Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 42/89] usb: dwc3: gadget: return error if command sent to DGCMD register fails Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 43/89] usb: dwc3: gadget: return error if command sent to DEPCMD " Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 44/89] usb: dwc3: Reset the transfer resource index on SET_INTERFACE Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 45/89] USB: devio: fix a condition in async_completed() Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 46/89] USB: cp210x: add ID for Aruba Networks controllers Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 47/89] USB: option: add 2020:4000 ID Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 48/89] usb: xhci: Bugfix for NULL pointer deference in xhci_endpoint_init() function Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 49/89] dm btree remove: fix bug in redistribute3 Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 50/89] dm btree: silence lockdep lock inversion in dm_btree_del() Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 51/89] mmc: block: Add missing mmc_blk_put() in power_ro_lock_show() Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 52/89] drm/qxl: Do not cause spice-server to clean our objects Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 53/89] drm/radeon: take the mode_config mutex when dealing with hpds (v2) Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 55/89] drm: add a check for x/y in drm_mode_setcrtc Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 56/89] xfs: fix remote symlinks on V5/CRC filesystems Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 57/89] vTPM: set virtual device before passing to ibmvtpm_reset_crq Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 58/89] libata: add ATA_HORKAGE_NOTRIM Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 59/89] libata: force disable trim for SuperSSpeed S238 Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 60/89] tracing/filter: Do not WARN on operand count going below zero Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 61/89] tracing/filter: Do not allow infix to exceed end of string Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 62/89] tracing: Have branch tracer use recursive field of task struct Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 63/89] dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 64/89] hwmon: (mcp3021) Fix broken output scaling Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 65/89] md: fix a build warning Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 66/89] Btrfs: use kmem_cache_free when freeing entry in inode cache Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 67/89] fuse: initialize fc->release before calling it Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 68/89] crush: fix a bug in tree bucket decode Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 69/89] ACPICA: Tables: Fix an issue that FACS initialization is performed twice Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 70/89] iscsi-target: Convert iscsi_thread_set usage to kthread.h Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 71/89] iser-target: Fix possible deadlock in RDMA_CM connection error Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 72/89] iser-target: release stale iser connections Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 73/89] mmc: card: Fixup request missing in mmc_blk_issue_rw_rq Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 74/89] __bitmap_parselist: fix bug in empty string handling Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 75/89] mac80211: prevent possible crypto tx tailroom corruption Greg Kroah-Hartman
2015-07-31 19:41 ` [PATCH 3.10 76/89] USB: usbfs: allow URBs to be reaped after disconnection Greg Kroah-Hartman
2015-07-31 19:42 ` [PATCH 3.10 78/89] NFS: Fix size of NFSACL SETACL operations Greg Kroah-Hartman
2015-07-31 19:42 ` [PATCH 3.10 79/89] fixing infinite OPEN loop in 4.0 stateid recovery Greg Kroah-Hartman
2015-07-31 19:42 ` [PATCH 3.10 80/89] nfs: increase size of EXCHANGE_ID name string buffer Greg Kroah-Hartman
2015-07-31 19:42 ` [PATCH 3.10 81/89] SUNRPC: Fix a memory leak in the backchannel code Greg Kroah-Hartman
2015-07-31 19:42 ` [PATCH 3.10 82/89] 9p: forgetting to cancel request on interrupted zero-copy RPC Greg Kroah-Hartman
2015-07-31 19:42 ` [PATCH 3.10 83/89] 9p: dont leave a half-initialized inode sitting around Greg Kroah-Hartman
2015-07-31 19:42 ` [PATCH 3.10 84/89] rbd: use GFP_NOIO in rbd_obj_request_create() Greg Kroah-Hartman
2015-07-31 19:42 ` [PATCH 3.10 85/89] agp/intel: Fix typo in needs_ilk_vtd_wa() Greg Kroah-Hartman
2015-07-31 19:42 ` [PATCH 3.10 86/89] hpfs: hpfs_error: Remove static buffer, use vsprintf extension %pV instead Greg Kroah-Hartman
2015-07-31 19:42 ` [PATCH 3.10 87/89] Fix firmware loader uevent buffer NULL pointer dereference Greg Kroah-Hartman
2015-07-31 19:42 ` [PATCH 3.10 88/89] qla2xxx: Mark port lost when we receive an RSCN for it Greg Kroah-Hartman
2015-07-31 19:42 ` [PATCH 3.10 89/89] MIPS: KVM: Do not sign extend on unsigned MMIO load Greg Kroah-Hartman
2015-08-01 2:06 ` [PATCH 3.10 00/89] 3.10.85-stable review Guenter Roeck
2015-08-01 8:27 ` Sudip Mukherjee
2015-08-03 18:26 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150731194031.160294379@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).