* [PATCH 3.16 - 3.18] staging: comedi: usbduxsigma: don't clobber ai_timer in command test
@ 2015-09-16 13:17 Ian Abbott
2015-09-22 21:55 ` Luis Henriques
0 siblings, 1 reply; 2+ messages in thread
From: Ian Abbott @ 2015-09-16 13:17 UTC (permalink / raw)
To: stable; +Cc: Ian Abbott
commit 423b24c37dd5794a674c74b0ed56392003a69891 upstream
`devpriv->ai_timer` is used while an asynchronous command is running on
the AI subdevice. It also gets modified by the subdevice's `cmdtest`
handler for checking new asynchronous commands
(`usbduxsigma_ai_cmdtest()`), which is not correct as it's allowed to
check new commands while an old command is still running. Fix it by
moving the code which sets up `devpriv->ai_timer` and
`devpriv->ai_interval` into the subdevice's `cmd` handler,
`usbduxsigma_ai_cmd()`.
** This backported patch also moves the code that sets up
`devpriv->ai_sample_count` from `usbduxsigma_ai_cmdtest()` to
`usbduxsigma_ai_cmd()` for the same reason as above. (This was not
needed in the upstream commit.) **
Note that the removed code in `usbduxsigma_ai_cmdtest()` checked that
`devpriv->ai_timer` did not end up less than than 1, but that could not
happen because `cmd->scan_begin_arg` had already been checked to be at
least the minimum required value (at least when `cmd->scan_begin_src ==
TRIG_TIMER`, which had also been checked to be the case).
Fixes: b986be8527c7 ("staging: comedi: usbduxsigma: tidy up analog input command support)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/usbduxsigma.c | 53 +++++++++++++---------------
1 file changed, 24 insertions(+), 29 deletions(-)
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index ebd68e3..a6f87f0 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -566,35 +566,6 @@ static int usbduxsigma_ai_cmdtest(struct comedi_device *dev,
if (err)
return 3;
- /* Step 4: fix up any arguments */
-
- if (high_speed) {
- /*
- * every 2 channels get a time window of 125us. Thus, if we
- * sample all 16 channels we need 1ms. If we sample only one
- * channel we need only 125us
- */
- devpriv->ai_interval = interval;
- devpriv->ai_timer = cmd->scan_begin_arg / (125000 * interval);
- } else {
- /* interval always 1ms */
- devpriv->ai_interval = 1;
- devpriv->ai_timer = cmd->scan_begin_arg / 1000000;
- }
- if (devpriv->ai_timer < 1)
- err |= -EINVAL;
-
- if (cmd->stop_src == TRIG_COUNT) {
- /* data arrives as one packet */
- devpriv->ai_sample_count = cmd->stop_arg;
- } else {
- /* continuous acquisition */
- devpriv->ai_sample_count = 0;
- }
-
- if (err)
- return 4;
-
return 0;
}
@@ -694,6 +665,30 @@ static int usbduxsigma_ai_cmd(struct comedi_device *dev,
/* set current channel of the running acquisition to zero */
s->async->cur_chan = 0;
+
+ if (devpriv->high_speed) {
+ /*
+ * every 2 channels get a time window of 125us. Thus, if we
+ * sample all 16 channels we need 1ms. If we sample only one
+ * channel we need only 125us
+ */
+ unsigned int interval = usbduxsigma_chans_to_interval(len);
+
+ devpriv->ai_interval = interval;
+ devpriv->ai_timer = cmd->scan_begin_arg / (125000 * interval);
+ } else {
+ /* interval always 1ms */
+ devpriv->ai_interval = 1;
+ devpriv->ai_timer = cmd->scan_begin_arg / 1000000;
+ }
+ if (cmd->stop_src == TRIG_COUNT) {
+ /* data arrives as one packet */
+ devpriv->ai_sample_count = cmd->stop_arg;
+ } else {
+ /* continuous acquisition */
+ devpriv->ai_sample_count = 0;
+ }
+
for (i = 0; i < len; i++) {
unsigned int chan = CR_CHAN(cmd->chanlist[i]);
--
2.5.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 3.16 - 3.18] staging: comedi: usbduxsigma: don't clobber ai_timer in command test
2015-09-16 13:17 [PATCH 3.16 - 3.18] staging: comedi: usbduxsigma: don't clobber ai_timer in command test Ian Abbott
@ 2015-09-22 21:55 ` Luis Henriques
0 siblings, 0 replies; 2+ messages in thread
From: Luis Henriques @ 2015-09-22 21:55 UTC (permalink / raw)
To: Ian Abbott; +Cc: stable
On Wed, Sep 16, 2015 at 02:17:14PM +0100, Ian Abbott wrote:
> commit 423b24c37dd5794a674c74b0ed56392003a69891 upstream
>
Thank you, Ian. I'll queue these 2 backports for the 3.16 kernel.
Cheers,
--
Lu�s
> `devpriv->ai_timer` is used while an asynchronous command is running on
> the AI subdevice. It also gets modified by the subdevice's `cmdtest`
> handler for checking new asynchronous commands
> (`usbduxsigma_ai_cmdtest()`), which is not correct as it's allowed to
> check new commands while an old command is still running. Fix it by
> moving the code which sets up `devpriv->ai_timer` and
> `devpriv->ai_interval` into the subdevice's `cmd` handler,
> `usbduxsigma_ai_cmd()`.
>
> ** This backported patch also moves the code that sets up
> `devpriv->ai_sample_count` from `usbduxsigma_ai_cmdtest()` to
> `usbduxsigma_ai_cmd()` for the same reason as above. (This was not
> needed in the upstream commit.) **
>
> Note that the removed code in `usbduxsigma_ai_cmdtest()` checked that
> `devpriv->ai_timer` did not end up less than than 1, but that could not
> happen because `cmd->scan_begin_arg` had already been checked to be at
> least the minimum required value (at least when `cmd->scan_begin_src ==
> TRIG_TIMER`, which had also been checked to be the case).
>
> Fixes: b986be8527c7 ("staging: comedi: usbduxsigma: tidy up analog input command support)
> Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
> ---
> drivers/staging/comedi/drivers/usbduxsigma.c | 53 +++++++++++++---------------
> 1 file changed, 24 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
> index ebd68e3..a6f87f0 100644
> --- a/drivers/staging/comedi/drivers/usbduxsigma.c
> +++ b/drivers/staging/comedi/drivers/usbduxsigma.c
> @@ -566,35 +566,6 @@ static int usbduxsigma_ai_cmdtest(struct comedi_device *dev,
> if (err)
> return 3;
>
> - /* Step 4: fix up any arguments */
> -
> - if (high_speed) {
> - /*
> - * every 2 channels get a time window of 125us. Thus, if we
> - * sample all 16 channels we need 1ms. If we sample only one
> - * channel we need only 125us
> - */
> - devpriv->ai_interval = interval;
> - devpriv->ai_timer = cmd->scan_begin_arg / (125000 * interval);
> - } else {
> - /* interval always 1ms */
> - devpriv->ai_interval = 1;
> - devpriv->ai_timer = cmd->scan_begin_arg / 1000000;
> - }
> - if (devpriv->ai_timer < 1)
> - err |= -EINVAL;
> -
> - if (cmd->stop_src == TRIG_COUNT) {
> - /* data arrives as one packet */
> - devpriv->ai_sample_count = cmd->stop_arg;
> - } else {
> - /* continuous acquisition */
> - devpriv->ai_sample_count = 0;
> - }
> -
> - if (err)
> - return 4;
> -
> return 0;
> }
>
> @@ -694,6 +665,30 @@ static int usbduxsigma_ai_cmd(struct comedi_device *dev,
>
> /* set current channel of the running acquisition to zero */
> s->async->cur_chan = 0;
> +
> + if (devpriv->high_speed) {
> + /*
> + * every 2 channels get a time window of 125us. Thus, if we
> + * sample all 16 channels we need 1ms. If we sample only one
> + * channel we need only 125us
> + */
> + unsigned int interval = usbduxsigma_chans_to_interval(len);
> +
> + devpriv->ai_interval = interval;
> + devpriv->ai_timer = cmd->scan_begin_arg / (125000 * interval);
> + } else {
> + /* interval always 1ms */
> + devpriv->ai_interval = 1;
> + devpriv->ai_timer = cmd->scan_begin_arg / 1000000;
> + }
> + if (cmd->stop_src == TRIG_COUNT) {
> + /* data arrives as one packet */
> + devpriv->ai_sample_count = cmd->stop_arg;
> + } else {
> + /* continuous acquisition */
> + devpriv->ai_sample_count = 0;
> + }
> +
> for (i = 0; i < len; i++) {
> unsigned int chan = CR_CHAN(cmd->chanlist[i]);
>
> --
> 2.5.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-09-22 21:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-09-16 13:17 [PATCH 3.16 - 3.18] staging: comedi: usbduxsigma: don't clobber ai_timer in command test Ian Abbott
2015-09-22 21:55 ` Luis Henriques
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).