[PATCH 3.14 00/84] 3.14.54-stable review

[PATCH 3.14 00/84] 3.14.54-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.14.54 release.
There are 84 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Oct  1 14:52:55 UTC 2015.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.14.54-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.14.54-rc1

Keith Busch <keith.busch@intel.com>
    NVMe: Initialize device reference count earlier

Jan Kara <jack@suse.cz>
    udf: Check length of extended attributes and allocation descriptors

Andy Lutomirski <luto@kernel.org>
    x86/nmi/64: Use DF to avoid userspace RSP confusing nested NMI detection

Andy Lutomirski <luto@kernel.org>
    x86/nmi/64: Reorder nested NMI checks

Andy Lutomirski <luto@kernel.org>
    x86/nmi/64: Improve nested NMI comments

Andy Lutomirski <luto@kernel.org>
    x86/nmi/64: Switch stacks on userspace NMI entry

Andy Lutomirski <luto@kernel.org>
    x86/nmi/64: Remove asm code that saves CR2

Andy Lutomirski <luto@kernel.org>
    x86/nmi: Enable nested do_nmi() handling for 64-bit kernels

Markus Pargmann <mpa@pengutronix.de>
    Revert "iio: bmg160: IIO_BUFFER and IIO_TRIGGERED_BUFFER are required"

Florian Westphal <fw@strlen.de>
    net: gso: use feature flag argument in all protocol gso handlers

Ivan Vecera <ivecera@redhat.com>
    bna: fix interrupts storm caused by erroneous packets

Eric Dumazet <edumazet@google.com>
    udp: fix dst races with multicast early demux

Dan Carpenter <dan.carpenter@oracle.com>
    rds: fix an integer overflow test in rds_info_getsockopt()

Lars Westerhoff <lars.westerhoff@newtec.eu>
    packet: missing dev_put() in packet_do_bind()

Wilson Kok <wkok@cumulusnetworks.com>
    fib_rules: fix fib rule dumps across multiple skbs

Jesse Gross <jesse@nicira.com>
    openvswitch: Zero flows on allocation.

Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
    sctp: fix race on protocol/netns initialization

Daniel Borkmann <daniel@iogearbox.net>
    netlink, mmap: transform mmap skb into full skb on taps

Richard Laing <richard.laing@alliedtelesis.co.nz>
    net/ipv6: Correct PIM6 mrt_lock handling

Daniel Borkmann <daniel@iogearbox.net>
    ipv6: fix exthdrs offload registration in out_rt path

Eugene Shatokhin <eugene.shatokhin@rosalab.ru>
    usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared

huaibin Wang <huaibin.wang@6wind.com>
    ip6_gre: release cached dst on tunnel removal

Jack Morgenstein <jackm@dev.mellanox.co.il>
    net/mlx4_core: Fix wrong index in propagating port change event to VFs

Florian Westphal <fw@strlen.de>
    netlink: don't hold mutex in rcu callback when releasing mmapd ring

Edward Hyunkoo Jee <edjee@google.com>
    inet: frags: fix defragmented packet's IP header for af_packet

dingtianhong <dingtianhong@huawei.com>
    bonding: correct the MAC address for "follow" fail_over_mac policy

Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
    bonding: fix destruction of bond with devices different from arphrd_ether

Eric Dumazet <edumazet@google.com>
    ipv6: lock socket in ip6_datagram_connect()

Tilman Schmidt <tilman@imap.cc>
    isdn/gigaset: reset tty->receive_room when attaching ser_gigaset

Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
    bridge: mdb: fix double add notification

Herbert Xu <herbert@gondor.apana.org.au>
    net: Fix skb_set_peeked use-after-free bug

Herbert Xu <herbert@gondor.apana.org.au>
    net: Fix skb csum races when peeking

Herbert Xu <herbert@gondor.apana.org.au>
    net: Clone skb before setting peeked flag

Julian Anastasov <ja@ssi.bg>
    net: call rcu_read_lock early in process_backlog

Julian Anastasov <ja@ssi.bg>
    net: do not process device backlog during unregistration

Oleg Nesterov <oleg@redhat.com>
    net: pktgen: fix race between pktgen_thread_worker() and kthread_stop()

Nikolay Aleksandrov <razor@blackwall.org>
    bridge: mdb: zero out the local br_ip variable before use

Stephen Smalley <sds@tycho.nsa.gov>
    net/tipc: initialize security state for new connection socket

Timo Teräs <timo.teras@iki.fi>
    ip_tunnel: fix ipv4 pmtu check to honor inner ip header df

Daniel Borkmann <daniel@iogearbox.net>
    rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver

Eric Dumazet <edumazet@google.com>
    net: graceful exit from netif_alloc_netdev_queues()

Angga <Hermin.Anggawijaya@alliedtelesis.co.nz>
    ipv6: Make MLD packets to only be processed locally

Hin-Tak Leung <htl10@users.sourceforge.net>
    hfs,hfsplus: cache pages correctly between bnode_create and bnode_free

Alexey Brodkin <Alexey.Brodkin@synopsys.com>
    stmmac: troubleshoot unexpected bits in des0 & des1

Alexey Brodkin <Alexey.Brodkin@synopsys.com>
    stmmac: fix check for phydev being open

Noa Osherovich <noaos@mellanox.com>
    IB/mlx4: Use correct SL on AH query under RoCE

Jack Morgenstein <jackm@dev.mellanox.co.il>
    IB/mlx4: Forbid using sysfs to change RoCE pkeys

Yishai Hadas <yishaih@mellanox.com>
    IB/uverbs: Fix race between ib_uverbs_open and remove_one

Christoph Hellwig <hch@lst.de>
    IB/uverbs: reject invalid or unknown opcodes

Mike Marciniszyn <mike.marciniszyn@intel.com>
    IB/qib: Change lkey table allocation to support more MRs

Hin-Tak Leung <htl10@users.sourceforge.net>
    hfs: fix B-tree corruption after insertion at position 0

David Vrabel <david.vrabel@citrix.com>
    xen/gntdev: convert priv->lock to a mutex

NeilBrown <neilb@suse.com>
    md/raid10: always set reshape_safe when initializing reshape_position.

Jialing Fu <jlfu@marvell.com>
    mmc: core: fix race condition in mmc_wait_data_done

Jann Horn <jann@thejh.net>
    fs: if a coredump already exists, unlink and recreate with O_EXCL

Jaewon Kim <jaewon31.kim@samsung.com>
    vmscan: fix increasing nr_isolated incurred by putback unevictable pages

Helge Deller <deller@gmx.de>
    parisc: Filter out spurious interrupts in PA-RISC irq handler

John David Anglin <dave.anglin@bell.net>
    parisc: Use double word condition in 64bit CAS operation

Trond Myklebust <trond.myklebust@primarydata.com>
    NFS: nfs_set_pgio_error sometimes misses errors

Kinglong Mee <kinglongmee@gmail.com>
    NFS: Fix a NULL pointer dereference of migration recovery ops for v4.2 client

NeilBrown <neilb@suse.com>
    NFSv4: don't set SETATTR for O_RDONLY|O_EXCL

Filipe Manana <fdmanana@suse.com>
    Btrfs: check if previous transaction aborted to avoid fs corruption

Sakari Ailus <sakari.ailus@iki.fi>
    v4l: omap3isp: Fix sub-device power management code

David Härdeman <david@hardeman.nu>
    rc-core: fix remove uevent generation

Minfei Huang <mnfhuang@gmail.com>
    x86/mm: Initialize pmd_idx in page_table_range_init_count()

Yinghai Lu <yinghai@kernel.org>
    mm: check if section present during memory block registering

Jeffery Miller <jmiller@neverware.com>
    Add radeon suspend/resume quirk for HP Compaq dc5750.

Jann Horn <jann@thejh.net>
    CIFS: fix type confusion in copy offload ioctl

Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
    powerpc/mm: Recompute hash value after a failed update

Thomas Huth <thuth@redhat.com>
    powerpc/rtas: Introduce rtas_get_sensor_fast() for IRQ handlers

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/mm: Fix pte_pagesize_index() crash on 4K w/64K hash

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Use ALC880_FIXUP_FUJITSU for FSC Amilo M1437

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Enable headphone jack detect on old Fujitsu laptops

Takashi Iwai <tiwai@suse.de>
    Input: evdev - do not report errors form flush()

Marc Zyngier <marc.zyngier@arm.com>
    arm64: KVM: Disable virtual timer even if the guest is not using it

Will Deacon <will.deacon@arm.com>
    arm64: errata: add module build workaround for erratum #843419

Will Deacon <will.deacon@arm.com>
    arm64: head.S: initialise mdcr_el2 in el2_setup

Will Deacon <will.deacon@arm.com>
    arm64: compat: fix vfp save/restore across signal handlers in big-endian

Jeff Vander Stoep <jeffv@google.com>
    arm64: kconfig: Move LIST_POISON to a safe value

Bob Copeland <me@bobcopeland.com>
    mac80211: enable assoc check for mesh interfaces

Jean Delvare <jdelvare@suse.de>
    tg3: Fix temperature reporting

Adrien Schildknecht <adrien+dev@schischi.me>
    rtlwifi: rtl8192cu: Add new device ID

Eric W. Biederman <ebiederm@xmission.com>
    unshare: Unsharing a thread does not require unsharing a vm

Ming Lei <ming.lei@canonical.com>
    blk-mq: fix buffer overflow when reading sysfs file of 'pending'


-------------

Diffstat:

 Makefile                                          |   4 +-
 arch/arm64/Kconfig                                |  20 ++
 arch/arm64/Makefile                               |   4 +
 arch/arm64/kernel/head.S                          |   5 +
 arch/arm64/kernel/module.c                        |   2 +
 arch/arm64/kernel/signal32.c                      |  47 +++-
 arch/arm64/kvm/hyp.S                              |   5 +-
 arch/parisc/kernel/irq.c                          |   8 +-
 arch/parisc/kernel/syscall.S                      |   2 +-
 arch/powerpc/include/asm/pgtable-ppc64.h          |  14 +-
 arch/powerpc/include/asm/rtas.h                   |   1 +
 arch/powerpc/kernel/rtas.c                        |  17 ++
 arch/powerpc/mm/hugepage-hash64.c                 |   3 +-
 arch/powerpc/platforms/pseries/ras.c              |   3 +-
 arch/x86/kernel/entry_64.S                        | 296 ++++++++++++++--------
 arch/x86/kernel/nmi.c                             | 123 ++++-----
 arch/x86/mm/init_32.c                             |   1 +
 block/blk-mq-sysfs.c                              |  25 +-
 drivers/base/node.c                               |  10 +
 drivers/block/nvme-core.c                         |   2 +-
 drivers/gpu/drm/radeon/radeon_combios.c           |   8 +
 drivers/iio/gyro/Kconfig                          |   3 +-
 drivers/infiniband/core/uverbs.h                  |   3 +-
 drivers/infiniband/core/uverbs_cmd.c              |  10 +-
 drivers/infiniband/core/uverbs_main.c             |  43 +++-
 drivers/infiniband/hw/mlx4/ah.c                   |   6 +-
 drivers/infiniband/hw/mlx4/sysfs.c                |   5 +-
 drivers/infiniband/hw/qib/qib_keys.c              |   4 +
 drivers/infiniband/hw/qib/qib_verbs.c             |  14 +-
 drivers/infiniband/hw/qib/qib_verbs.h             |   2 +
 drivers/input/evdev.c                             |  13 +-
 drivers/isdn/gigaset/ser-gigaset.c                |  11 +-
 drivers/md/raid10.c                               |   5 +-
 drivers/media/platform/omap3isp/isp.c             |   4 +-
 drivers/media/rc/rc-main.c                        |   3 -
 drivers/mmc/core/core.c                           |   6 +-
 drivers/net/bonding/bond_main.c                   |  21 ++
 drivers/net/ethernet/broadcom/tg3.c               |   2 +-
 drivers/net/ethernet/brocade/bna/bnad.c           |   2 +-
 drivers/net/ethernet/mellanox/mlx4/eq.c           |   4 +-
 drivers/net/ethernet/stmicro/stmmac/descs.h       |   2 +
 drivers/net/ethernet/stmicro/stmmac/enh_desc.c    |   3 +-
 drivers/net/ethernet/stmicro/stmmac/norm_desc.c   |   3 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |  49 ++--
 drivers/net/usb/usbnet.c                          |   7 +-
 drivers/net/wireless/rtlwifi/rtl8192cu/sw.c       |   1 +
 drivers/xen/gntdev.c                              |  40 +--
 fs/btrfs/transaction.c                            |   3 +
 fs/cifs/ioctl.c                                   |   6 +
 fs/coredump.c                                     |  38 ++-
 fs/hfs/bnode.c                                    |   9 +-
 fs/hfs/brec.c                                     |  20 +-
 fs/hfsplus/bnode.c                                |   3 -
 fs/nfs/nfs4proc.c                                 |   3 +-
 fs/nfs/pagelist.c                                 |   4 +-
 fs/udf/inode.c                                    |  16 ++
 include/net/ip.h                                  |   1 +
 kernel/fork.c                                     |  28 +-
 mm/vmscan.c                                       |   2 +-
 net/bridge/br_mdb.c                               |   3 +-
 net/core/datagram.c                               |  45 +++-
 net/core/dev.c                                    |  38 +--
 net/core/fib_rules.c                              |  14 +-
 net/core/pktgen.c                                 |   4 +-
 net/core/rtnetlink.c                              | 128 +++++-----
 net/ipv4/af_inet.c                                |   2 +-
 net/ipv4/datagram.c                               |  16 +-
 net/ipv4/gre_offload.c                            |   2 +-
 net/ipv4/ip_fragment.c                            |   7 +-
 net/ipv4/ip_tunnel.c                              |   8 +-
 net/ipv4/udp.c                                    |  15 +-
 net/ipv6/datagram.c                               |  20 +-
 net/ipv6/exthdrs_offload.c                        |   2 +-
 net/ipv6/ip6_gre.c                                |   1 +
 net/ipv6/ip6_input.c                              |   6 +-
 net/ipv6/ip6_offload.c                            |   2 +-
 net/ipv6/ip6mr.c                                  |   2 +-
 net/mac80211/tx.c                                 |   3 -
 net/mpls/mpls_gso.c                               |   2 +-
 net/netlink/af_netlink.c                          | 109 +++++---
 net/netlink/af_netlink.h                          |   9 +
 net/openvswitch/datapath.c                        |   2 +-
 net/openvswitch/flow_table.c                      |  21 +-
 net/openvswitch/flow_table.h                      |   2 +-
 net/packet/af_packet.c                            |   8 +-
 net/rds/info.c                                    |   2 +-
 net/sctp/protocol.c                               |  64 +++--
 net/tipc/socket.c                                 |   1 +
 sound/pci/hda/patch_realtek.c                     |   6 +-
 89 files changed, 1010 insertions(+), 533 deletions(-)

[PATCH 3.14 01/84] blk-mq: fix buffer overflow when reading sysfs file of pending

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ming Lei <ming.lei@canonical.com>

commit 596f5aad2a704b72934e5abec1b1b4114c16f45b upstream.

There may be lots of pending requests so that the buffer of PAGE_SIZE
can't hold them at all.

One typical example is scsi-mq, the queue depth(.can_queue) of
scsi_host and blk-mq is quite big but scsi_device's queue_depth
is a bit small(.cmd_per_lun), then it is quite easy to have lots
of pending requests in hw queue.

This patch fixes the following warning and the related memory
destruction.

[  359.025101] fill_read_buffer: blk_mq_hw_sysfs_show+0x0/0x7d returned bad count^M
[  359.055595] irq event stamp: 15537^M
[  359.055606] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC ^M
[  359.055614] Dumping ftrace buffer:^M
[  359.055660]    (ftrace buffer empty)^M
[  359.055672] Modules linked in: nbd ipv6 kvm_intel kvm serio_raw^M
[  359.055678] CPU: 4 PID: 21631 Comm: stress-ng-sysfs Not tainted 4.2.0-rc5-next-20150805 #434^M
[  359.055679] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011^M
[  359.055682] task: ffff8802161cc000 ti: ffff88021b4a8000 task.ti: ffff88021b4a8000^M
[  359.055693] RIP: 0010:[<ffffffff811541c5>]  [<ffffffff811541c5>] __kmalloc+0xe8/0x152^M

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/blk-mq-sysfs.c |   21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

--- a/block/blk-mq-sysfs.c
+++ b/block/blk-mq-sysfs.c
@@ -141,15 +141,26 @@ static ssize_t blk_mq_sysfs_completed_sh
 
 static ssize_t sysfs_list_show(char *page, struct list_head *list, char *msg)
 {
-	char *start_page = page;
 	struct request *rq;
+	int len = snprintf(page, PAGE_SIZE - 1, "%s:\n", msg);
 
-	page += sprintf(page, "%s:\n", msg);
+	list_for_each_entry(rq, list, queuelist) {
+		const int rq_len = 2 * sizeof(rq) + 2;
 
-	list_for_each_entry(rq, list, queuelist)
-		page += sprintf(page, "\t%p\n", rq);
+		/* if the output will be truncated */
+		if (PAGE_SIZE - 1 < len + rq_len) {
+			/* backspacing if it can't hold '\t...\n' */
+			if (PAGE_SIZE - 1 < len + 5)
+				len -= rq_len;
+			len += snprintf(page + len, PAGE_SIZE - 1 - len,
+					"\t...\n");
+			break;
+		}
+		len += snprintf(page + len, PAGE_SIZE - 1 - len,
+				"\t%p\n", rq);
+	}
 
-	return page - start_page;
+	return len;
 }
 
 static ssize_t blk_mq_sysfs_rq_list_show(struct blk_mq_ctx *ctx, char *page)

[PATCH 3.14 02/84] unshare: Unsharing a thread does not require unsharing a vm

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Eric W. Biederman" <ebiederm@xmission.com>

commit 12c641ab8270f787dfcce08b5f20ce8b65008096 upstream.

In the logic in the initial commit of unshare made creating a new
thread group for a process, contingent upon creating a new memory
address space for that process.  That is wrong.  Two separate
processes in different thread groups can share a memory address space
and clone allows creation of such proceses.

This is significant because it was observed that mm_users > 1 does not
mean that a process is multi-threaded, as reading /proc/PID/maps
temporarily increments mm_users, which allows other processes to
(accidentally) interfere with unshare() calls.

Correct the check in check_unshare_flags() to test for
!thread_group_empty() for CLONE_THREAD, CLONE_SIGHAND, and CLONE_VM.
For sighand->count > 1 for CLONE_SIGHAND and CLONE_VM.
For !current_is_single_threaded instead of mm_users > 1 for CLONE_VM.

By using the correct checks in unshare this removes the possibility of
an accidental denial of service attack.

Additionally using the correct checks in unshare ensures that only an
explicit unshare(CLONE_VM) can possibly trigger the slow path of
current_is_single_threaded().  As an explict unshare(CLONE_VM) is
pointless it is not expected there are many applications that make
that call.

Fixes: b2e0d98705e60e45bbb3c0032c48824ad7ae0704 userns: Implement unshare of the user namespace
Reported-by: Ricky Zhou <rickyz@chromium.org>
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/fork.c |   28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1756,13 +1756,21 @@ static int check_unshare_flags(unsigned
 				CLONE_NEWUSER|CLONE_NEWPID))
 		return -EINVAL;
 	/*
-	 * Not implemented, but pretend it works if there is nothing to
-	 * unshare. Note that unsharing CLONE_THREAD or CLONE_SIGHAND
-	 * needs to unshare vm.
+	 * Not implemented, but pretend it works if there is nothing
+	 * to unshare.  Note that unsharing the address space or the
+	 * signal handlers also need to unshare the signal queues (aka
+	 * CLONE_THREAD).
 	 */
 	if (unshare_flags & (CLONE_THREAD | CLONE_SIGHAND | CLONE_VM)) {
-		/* FIXME: get_task_mm() increments ->mm_users */
-		if (atomic_read(&current->mm->mm_users) > 1)
+		if (!thread_group_empty(current))
+			return -EINVAL;
+	}
+	if (unshare_flags & (CLONE_SIGHAND | CLONE_VM)) {
+		if (atomic_read(&current->sighand->count) > 1)
+			return -EINVAL;
+	}
+	if (unshare_flags & CLONE_VM) {
+		if (!current_is_single_threaded())
 			return -EINVAL;
 	}
 
@@ -1831,16 +1839,16 @@ SYSCALL_DEFINE1(unshare, unsigned long,
 	if (unshare_flags & CLONE_NEWUSER)
 		unshare_flags |= CLONE_THREAD | CLONE_FS;
 	/*
-	 * If unsharing a thread from a thread group, must also unshare vm.
-	 */
-	if (unshare_flags & CLONE_THREAD)
-		unshare_flags |= CLONE_VM;
-	/*
 	 * If unsharing vm, must also unshare signal handlers.
 	 */
 	if (unshare_flags & CLONE_VM)
 		unshare_flags |= CLONE_SIGHAND;
 	/*
+	 * If unsharing a signal handlers, must also unshare the signal queues.
+	 */
+	if (unshare_flags & CLONE_SIGHAND)
+		unshare_flags |= CLONE_THREAD;
+	/*
 	 * If unsharing namespace, must also unshare filesystem information.
 	 */
 	if (unshare_flags & CLONE_NEWNS)

[PATCH 3.14 03/84] rtlwifi: rtl8192cu: Add new device ID

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adrien Schildknecht <adrien+dev@schischi.me>

commit 1642d09fb9b128e8e538b2a4179962a34f38dff9 upstream.

The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043

Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rtlwifi/rtl8192cu/sw.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -314,6 +314,7 @@ static struct usb_device_id rtl8192c_usb
 	{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
 	{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
 	{RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
+	{RTL_USB_DEVICE(0x0846, 0x9043, rtl92cu_hal_cfg)}, /*NG WNA1000Mv2*/
 	{RTL_USB_DEVICE(0x0b05, 0x17ba, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
 	{RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
 	{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/

[PATCH 3.14 04/84] tg3: Fix temperature reporting

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jean Delvare <jdelvare@suse.de>

commit d3d11fe08ccc9bff174fc958722b5661f0932486 upstream.

The temperature registers appear to report values in degrees Celsius
while the hwmon API mandates values to be exposed in millidegrees
Celsius. Do the conversion so that the values reported by "sensors"
are correct.

Fixes: aed93e0bf493 ("tg3: Add hwmon support for temperature")
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Prashant Sreedharan <prashant@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/broadcom/tg3.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -10737,7 +10737,7 @@ static ssize_t tg3_show_temp(struct devi
 	tg3_ape_scratchpad_read(tp, &temperature, attr->index,
 				sizeof(temperature));
 	spin_unlock_bh(&tp->lock);
-	return sprintf(buf, "%u\n", temperature);
+	return sprintf(buf, "%u\n", temperature * 1000);
 }
 
 

[PATCH 3.14 05/84] mac80211: enable assoc check for mesh interfaces

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bob Copeland <me@bobcopeland.com>

commit 3633ebebab2bbe88124388b7620442315c968e8f upstream.

We already set a station to be associated when peering completes, both
in user space and in the kernel.  Thus we should always have an
associated sta before sending data frames to that station.

Failure to check assoc state can cause crashes in the lower-level driver
due to transmitting unicast data frames before driver sta structures
(e.g. ampdu state in ath9k) are initialized.  This occurred when
forwarding in the presence of fixed mesh paths: frames were transmitted
to stations with whom we hadn't yet completed peering.

Reported-by: Alexis Green <agreen@cococorp.com>
Tested-by: Jesse Jones <jjones@cococorp.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac80211/tx.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -297,9 +297,6 @@ ieee80211_tx_h_check_assoc(struct ieee80
 	if (tx->sdata->vif.type == NL80211_IFTYPE_WDS)
 		return TX_CONTINUE;
 
-	if (tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
-		return TX_CONTINUE;
-
 	if (tx->flags & IEEE80211_TX_PS_BUFFERED)
 		return TX_CONTINUE;
 

[PATCH 3.14 06/84] arm64: kconfig: Move LIST_POISON to a safe value

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Vander Stoep <jeffv@google.com>

commit bf0c4e04732479f650ff59d1ee82de761c0071f0 upstream.

Move the poison pointer offset to 0xdead000000000000, a
recognized value that is not mappable by user-space exploits.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Thierry Strudel <tstrudel@google.com>
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/Kconfig |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -68,6 +68,10 @@ config NO_IOPORT
 config STACKTRACE_SUPPORT
 	def_bool y
 
+config ILLEGAL_POINTER_VALUE
+	hex
+	default 0xdead000000000000
+
 config LOCKDEP_SUPPORT
 	def_bool y
 

[PATCH 3.14 07/84] arm64: compat: fix vfp save/restore across signal handlers in big-endian

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit bdec97a855ef1e239f130f7a11584721c9a1bf04 upstream.

When saving/restoring the VFP registers from a compat (AArch32)
signal frame, we rely on the compat registers forming a prefix of the
native register file and therefore make use of copy_{to,from}_user to
transfer between the native fpsimd_state and the compat_vfp_sigframe.

Unfortunately, this doesn't work so well in a big-endian environment.
Our fpsimd save/restore code operates directly on 128-bit quantities
(Q registers) whereas the compat_vfp_sigframe represents the registers
as an array of 64-bit (D) registers. The architecture packs the compat D
registers into the Q registers, with the least significant bytes holding
the lower register. Consequently, we need to swap the 64-bit halves when
converting between these two representations on a big-endian machine.

This patch replaces the __copy_{to,from}_user invocations in our
compat VFP signal handling code with explicit __put_user loops that
operate on 64-bit values and swap them accordingly.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/kernel/signal32.c |   47 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 36 insertions(+), 11 deletions(-)

--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -203,14 +203,32 @@ int copy_siginfo_from_user32(siginfo_t *
 
 /*
  * VFP save/restore code.
+ *
+ * We have to be careful with endianness, since the fpsimd context-switch
+ * code operates on 128-bit (Q) register values whereas the compat ABI
+ * uses an array of 64-bit (D) registers. Consequently, we need to swap
+ * the two halves of each Q register when running on a big-endian CPU.
  */
+union __fpsimd_vreg {
+	__uint128_t	raw;
+	struct {
+#ifdef __AARCH64EB__
+		u64	hi;
+		u64	lo;
+#else
+		u64	lo;
+		u64	hi;
+#endif
+	};
+};
+
 static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame)
 {
 	struct fpsimd_state *fpsimd = &current->thread.fpsimd_state;
 	compat_ulong_t magic = VFP_MAGIC;
 	compat_ulong_t size = VFP_STORAGE_SIZE;
 	compat_ulong_t fpscr, fpexc;
-	int err = 0;
+	int i, err = 0;
 
 	/*
 	 * Save the hardware registers to the fpsimd_state structure.
@@ -226,10 +244,15 @@ static int compat_preserve_vfp_context(s
 	/*
 	 * Now copy the FP registers. Since the registers are packed,
 	 * we can copy the prefix we want (V0-V15) as it is.
-	 * FIXME: Won't work if big endian.
 	 */
-	err |= __copy_to_user(&frame->ufp.fpregs, fpsimd->vregs,
-			      sizeof(frame->ufp.fpregs));
+	for (i = 0; i < ARRAY_SIZE(frame->ufp.fpregs); i += 2) {
+		union __fpsimd_vreg vreg = {
+			.raw = fpsimd->vregs[i >> 1],
+		};
+
+		__put_user_error(vreg.lo, &frame->ufp.fpregs[i], err);
+		__put_user_error(vreg.hi, &frame->ufp.fpregs[i + 1], err);
+	}
 
 	/* Create an AArch32 fpscr from the fpsr and the fpcr. */
 	fpscr = (fpsimd->fpsr & VFP_FPSCR_STAT_MASK) |
@@ -254,7 +277,7 @@ static int compat_restore_vfp_context(st
 	compat_ulong_t magic = VFP_MAGIC;
 	compat_ulong_t size = VFP_STORAGE_SIZE;
 	compat_ulong_t fpscr;
-	int err = 0;
+	int i, err = 0;
 
 	__get_user_error(magic, &frame->magic, err);
 	__get_user_error(size, &frame->size, err);
@@ -264,12 +287,14 @@ static int compat_restore_vfp_context(st
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;
 
-	/*
-	 * Copy the FP registers into the start of the fpsimd_state.
-	 * FIXME: Won't work if big endian.
-	 */
-	err |= __copy_from_user(fpsimd.vregs, frame->ufp.fpregs,
-				sizeof(frame->ufp.fpregs));
+	/* Copy the FP registers into the start of the fpsimd_state. */
+	for (i = 0; i < ARRAY_SIZE(frame->ufp.fpregs); i += 2) {
+		union __fpsimd_vreg vreg;
+
+		__get_user_error(vreg.lo, &frame->ufp.fpregs[i], err);
+		__get_user_error(vreg.hi, &frame->ufp.fpregs[i + 1], err);
+		fpsimd.vregs[i >> 1] = vreg.raw;
+	}
 
 	/* Extract the fpsr and the fpcr from the fpscr */
 	__get_user_error(fpscr, &frame->ufp.fpscr, err);

[PATCH 3.14 08/84] arm64: head.S: initialise mdcr_el2 in el2_setup

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit d10bcd473301888f957ec4b6b12aa3621be78d59 upstream.

When entering the kernel at EL2, we fail to initialise the MDCR_EL2
register which controls debug access and PMU capabilities at EL1.

This patch ensures that the register is initialised so that all traps
are disabled and all the PMU counters are available to the host. When a
guest is scheduled, KVM takes care to configure trapping appropriately.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/kernel/head.S |    5 +++++
 1 file changed, 5 insertions(+)

--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -203,6 +203,11 @@ CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// C
 	msr	hstr_el2, xzr			// Disable CP15 traps to EL2
 #endif
 
+	/* EL2 debug */
+	mrs	x0, pmcr_el0			// Disable debug access traps
+	ubfx	x0, x0, #11, #5			// to EL2 and allow access to
+	msr	mdcr_el2, x0			// all PMU counters from EL1
+
 	/* Stage-2 translation */
 	msr	vttbr_el2, xzr
 

[PATCH 3.14 09/84] arm64: errata: add module build workaround for erratum #843419

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit df057cc7b4fa59e9b55f07ffdb6c62bf02e99a00 upstream.

Cortex-A53 processors <= r0p4 are affected by erratum #843419 which can
lead to a memory access using an incorrect address in certain sequences
headed by an ADRP instruction.

There is a linker fix to generate veneers for ADRP instructions, but
this doesn't work for kernel modules which are built as unlinked ELF
objects.

This patch adds a new config option for the erratum which, when enabled,
builds kernel modules with the mcmodel=large flag. This uses absolute
addressing for all kernel symbols, thereby removing the use of ADRP as
a PC-relative form of addressing. The ADRP relocs are removed from the
module loader so that we fail to load any potentially affected modules.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/Kconfig         |   16 ++++++++++++++++
 arch/arm64/Makefile        |    4 ++++
 arch/arm64/kernel/module.c |    2 ++
 3 files changed, 22 insertions(+)

--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -306,6 +306,22 @@ menu "CPU Power Management"
 
 source "drivers/cpuidle/Kconfig"
 
+config ARM64_ERRATUM_843419
+	bool "Cortex-A53: 843419: A load or store might access an incorrect address"
+	depends on MODULES
+	default y
+	help
+	  This option builds kernel modules using the large memory model in
+	  order to avoid the use of the ADRP instruction, which can cause
+	  a subsequent memory access to use an incorrect address on Cortex-A53
+	  parts up to r0p4.
+
+	  Note that the kernel itself must be linked with a version of ld
+	  which fixes potentially affected ADRP instructions through the
+	  use of veneers.
+
+	  If unsure, say Y.
+
 endmenu
 
 source "net/Kconfig"
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -34,6 +34,10 @@ comma = ,
 
 CHECKFLAGS	+= -D__aarch64__
 
+ifeq ($(CONFIG_ARM64_ERRATUM_843419), y)
+CFLAGS_MODULE	+= -mcmodel=large
+endif
+
 # Default value
 head-y		:= arch/arm64/kernel/head.o
 
--- a/arch/arm64/kernel/module.c
+++ b/arch/arm64/kernel/module.c
@@ -330,12 +330,14 @@ int apply_relocate_add(Elf64_Shdr *sechd
 			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 0, 21,
 					     AARCH64_INSN_IMM_ADR);
 			break;
+#ifndef CONFIG_ARM64_ERRATUM_843419
 		case R_AARCH64_ADR_PREL_PG_HI21_NC:
 			overflow_check = false;
 		case R_AARCH64_ADR_PREL_PG_HI21:
 			ovf = reloc_insn_imm(RELOC_OP_PAGE, loc, val, 12, 21,
 					     AARCH64_INSN_IMM_ADR);
 			break;
+#endif
 		case R_AARCH64_ADD_ABS_LO12_NC:
 		case R_AARCH64_LDST8_ABS_LO12_NC:
 			overflow_check = false;

[PATCH 3.14 10/84] arm64: KVM: Disable virtual timer even if the guest is not using it

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <marc.zyngier@arm.com>

commit c4cbba9fa078f55d9f6d081dbb4aec7cf969e7c7 upstream.

When running a guest with the architected timer disabled (with QEMU and
the kernel_irqchip=off option, for example), it is important to make
sure the timer gets turned off. Otherwise, the guest may try to
enable it anyway, leading to a screaming HW interrupt.

The fix is to unconditionally turn off the virtual timer on guest
exit.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/kvm/hyp.S |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/arch/arm64/kvm/hyp.S
+++ b/arch/arm64/kvm/hyp.S
@@ -485,8 +485,6 @@ CPU_BE(	rev	w5, w5 )
 	mrs	x3, cntv_ctl_el0
 	and	x3, x3, #3
 	str	w3, [x0, #VCPU_TIMER_CNTV_CTL]
-	bic	x3, x3, #1		// Clear Enable
-	msr	cntv_ctl_el0, x3
 
 	isb
 
@@ -494,6 +492,9 @@ CPU_BE(	rev	w5, w5 )
 	str	x3, [x0, #VCPU_TIMER_CNTV_CVAL]
 
 1:
+	// Disable the virtual timer
+	msr	cntv_ctl_el0, xzr
+
 	// Allow physical timer/counter access for the host
 	mrs	x2, cnthctl_el2
 	orr	x2, x2, #3

[PATCH 3.14 11/84] Input: evdev - do not report errors form flush()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit eb38f3a4f6e86f8bb10a3217ebd85ecc5d763aae upstream.

We've got bug reports showing the old systemd-logind (at least
system-210) aborting unexpectedly, and this turned out to be because
of an invalid error code from close() call to evdev devices.  close()
is supposed to return only either EINTR or EBADFD, while the device
returned ENODEV.  logind was overreacting to it and decided to kill
itself when an unexpected error code was received.  What a tragedy.

The bad error code comes from flush fops, and actually evdev_flush()
returns ENODEV when device is disconnected or client's access to it is
revoked. But in these cases the fact that flush did not actually happen is
not an error, but rather normal behavior. For non-disconnected devices
result of flush is also not that interesting as there is no potential of
data loss and even if it fails application has no way of handling the
error. Because of that we are better off always returning success from
evdev_flush().

Also returning EINTR from flush()/close() is discouraged (as it is not
clear how application should handle this error), so let's stop taking
evdev->mutex interruptibly.

Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=939834
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/evdev.c |   13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -240,19 +240,14 @@ static int evdev_flush(struct file *file
 {
 	struct evdev_client *client = file->private_data;
 	struct evdev *evdev = client->evdev;
-	int retval;
 
-	retval = mutex_lock_interruptible(&evdev->mutex);
-	if (retval)
-		return retval;
+	mutex_lock(&evdev->mutex);
 
-	if (!evdev->exist || client->revoked)
-		retval = -ENODEV;
-	else
-		retval = input_flush_device(&evdev->handle, file);
+	if (evdev->exist && !client->revoked)
+		input_flush_device(&evdev->handle, file);
 
 	mutex_unlock(&evdev->mutex);
-	return retval;
+	return 0;
 }
 
 static void evdev_free(struct device *dev)

[PATCH 3.14 12/84] ALSA: hda - Enable headphone jack detect on old Fujitsu laptops

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit bb148bdeb0ab16fc0ae8009799471e4d7180073b upstream.

According to the bug report, FSC Amilo laptops with ALC880 can detect
the headphone jack but currently the driver disables it.  It's partly
intentionally, as non-working jack detect was reported in the past.
Let's enable now.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102501
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1193,7 +1193,7 @@ static const struct hda_fixup alc880_fix
 		/* override all pins as BIOS on old Amilo is broken */
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
-			{ 0x14, 0x0121411f }, /* HP */
+			{ 0x14, 0x0121401f }, /* HP */
 			{ 0x15, 0x99030120 }, /* speaker */
 			{ 0x16, 0x99030130 }, /* bass speaker */
 			{ 0x17, 0x411111f0 }, /* N/A */
@@ -1213,7 +1213,7 @@ static const struct hda_fixup alc880_fix
 		/* almost compatible with FUJITSU, but no bass and SPDIF */
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
-			{ 0x14, 0x0121411f }, /* HP */
+			{ 0x14, 0x0121401f }, /* HP */
 			{ 0x15, 0x99030120 }, /* speaker */
 			{ 0x16, 0x411111f0 }, /* N/A */
 			{ 0x17, 0x411111f0 }, /* N/A */

[PATCH 3.14 13/84] ALSA: hda - Use ALC880_FIXUP_FUJITSU for FSC Amilo M1437

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit a161574e200ae63a5042120e0d8c36830e81bde3 upstream.

It turned out that the machine has a bass speaker, so take a correct
fixup entry.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102501
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1421,7 +1421,7 @@ static const struct snd_pci_quirk alc880
 	SND_PCI_QUIRK(0x161f, 0x203d, "W810", ALC880_FIXUP_W810),
 	SND_PCI_QUIRK(0x161f, 0x205d, "Medion Rim 2150", ALC880_FIXUP_MEDION_RIM),
 	SND_PCI_QUIRK(0x1631, 0xe011, "PB 13201056", ALC880_FIXUP_6ST_AUTOMUTE),
-	SND_PCI_QUIRK(0x1734, 0x107c, "FSC F1734", ALC880_FIXUP_F1734),
+	SND_PCI_QUIRK(0x1734, 0x107c, "FSC Amilo M1437", ALC880_FIXUP_FUJITSU),
 	SND_PCI_QUIRK(0x1734, 0x1094, "FSC Amilo M1451G", ALC880_FIXUP_FUJITSU),
 	SND_PCI_QUIRK(0x1734, 0x10ac, "FSC AMILO Xi 1526", ALC880_FIXUP_F1734),
 	SND_PCI_QUIRK(0x1734, 0x10b0, "FSC Amilo Pi1556", ALC880_FIXUP_FUJITSU),

[PATCH 3.14 14/84] powerpc/mm: Fix pte_pagesize_index() crash on 4K w/64K hash

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Ellerman <mpe@ellerman.id.au>

commit 74b5037baa2011a2799e2c43adde7d171b072f9e upstream.

The powerpc kernel can be built to have either a 4K PAGE_SIZE or a 64K
PAGE_SIZE.

However when built with a 4K PAGE_SIZE there is an additional config
option which can be enabled, PPC_HAS_HASH_64K, which means the kernel
also knows how to hash a 64K page even though the base PAGE_SIZE is 4K.

This is used in one obscure configuration, to support 64K pages for SPU
local store on the Cell processor when the rest of the kernel is using
4K pages.

In this configuration, pte_pagesize_index() is defined to just pass
through its arguments to get_slice_psize(). However pte_pagesize_index()
is called for both user and kernel addresses, whereas get_slice_psize()
only knows how to handle user addresses.

This has been broken forever, however until recently it happened to
work. That was because in get_slice_psize() the large kernel address
would cause the right shift of the slice mask to return zero.

However in commit 7aa0727f3302 ("powerpc/mm: Increase the slice range to
64TB"), the get_slice_psize() code was changed so that instead of a
right shift we do an array lookup based on the address. When passed a
kernel address this means we index way off the end of the slice array
and return random junk.

That is only fatal if we happen to hit something non-zero, but when we
do return a non-zero value we confuse the MMU code and eventually cause
a check stop.

This fix is ugly, but simple. When we're called for a kernel address we
return 4K, which is always correct in this configuration, otherwise we
use the slice mask.

Fixes: 7aa0727f3302 ("powerpc/mm: Increase the slice range to 64TB")
Reported-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/pgtable-ppc64.h |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -135,7 +135,19 @@
 #define pte_iterate_hashed_end() } while(0)
 
 #ifdef CONFIG_PPC_HAS_HASH_64K
-#define pte_pagesize_index(mm, addr, pte)	get_slice_psize(mm, addr)
+/*
+ * We expect this to be called only for user addresses or kernel virtual
+ * addresses other than the linear mapping.
+ */
+#define pte_pagesize_index(mm, addr, pte)			\
+	({							\
+		unsigned int psize;				\
+		if (is_kernel_addr(addr))			\
+			psize = MMU_PAGE_4K;			\
+		else						\
+			psize = get_slice_psize(mm, addr);	\
+		psize;						\
+	})
 #else
 #define pte_pagesize_index(mm, addr, pte)	MMU_PAGE_4K
 #endif

[PATCH 3.14 15/84] powerpc/rtas: Introduce rtas_get_sensor_fast() for IRQ handlers

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Huth <thuth@redhat.com>

commit 1c2cb594441d02815d304cccec9742ff5c707495 upstream.

The EPOW interrupt handler uses rtas_get_sensor(), which in turn
uses rtas_busy_delay() to wait for RTAS becoming ready in case it
is necessary. But rtas_busy_delay() is annotated with might_sleep()
and thus may not be used by interrupts handlers like the EPOW handler!
This leads to the following BUG when CONFIG_DEBUG_ATOMIC_SLEEP is
enabled:

 BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:496
 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.2.0-rc2-thuth #6
 Call Trace:
 [c00000007ffe7b90] [c000000000807670] dump_stack+0xa0/0xdc (unreliable)
 [c00000007ffe7bc0] [c0000000000e1f14] ___might_sleep+0x134/0x180
 [c00000007ffe7c20] [c00000000002aec0] rtas_busy_delay+0x30/0xd0
 [c00000007ffe7c50] [c00000000002bde4] rtas_get_sensor+0x74/0xe0
 [c00000007ffe7ce0] [c000000000083264] ras_epow_interrupt+0x44/0x450
 [c00000007ffe7d90] [c000000000120260] handle_irq_event_percpu+0xa0/0x300
 [c00000007ffe7e70] [c000000000120524] handle_irq_event+0x64/0xc0
 [c00000007ffe7eb0] [c000000000124dbc] handle_fasteoi_irq+0xec/0x260
 [c00000007ffe7ef0] [c00000000011f4f0] generic_handle_irq+0x50/0x80
 [c00000007ffe7f20] [c000000000010f3c] __do_irq+0x8c/0x200
 [c00000007ffe7f90] [c0000000000236cc] call_do_irq+0x14/0x24
 [c00000007e6f39e0] [c000000000011144] do_IRQ+0x94/0x110
 [c00000007e6f3a30] [c000000000002594] hardware_interrupt_common+0x114/0x180

Fix this issue by introducing a new rtas_get_sensor_fast() function
that does not use rtas_busy_delay() - and thus can only be used for
sensors that do not cause a BUSY condition - known as "fast" sensors.

The EPOW sensor is defined to be "fast" in sPAPR - mpe.

Fixes: 587f83e8dd50 ("powerpc/pseries: Use rtas_get_sensor in RAS code")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/rtas.h      |    1 +
 arch/powerpc/kernel/rtas.c           |   17 +++++++++++++++++
 arch/powerpc/platforms/pseries/ras.c |    3 ++-
 3 files changed, 20 insertions(+), 1 deletion(-)

--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -255,6 +255,7 @@ extern void rtas_power_off(void);
 extern void rtas_halt(void);
 extern void rtas_os_term(char *str);
 extern int rtas_get_sensor(int sensor, int index, int *state);
+extern int rtas_get_sensor_fast(int sensor, int index, int *state);
 extern int rtas_get_power_level(int powerdomain, int *level);
 extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
 extern bool rtas_indicator_present(int token, int *maxindex);
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -584,6 +584,23 @@ int rtas_get_sensor(int sensor, int inde
 }
 EXPORT_SYMBOL(rtas_get_sensor);
 
+int rtas_get_sensor_fast(int sensor, int index, int *state)
+{
+	int token = rtas_token("get-sensor-state");
+	int rc;
+
+	if (token == RTAS_UNKNOWN_SERVICE)
+		return -ENOENT;
+
+	rc = rtas_call(token, 2, 2, state, sensor, index);
+	WARN_ON(rc == RTAS_BUSY || (rc >= RTAS_EXTENDED_DELAY_MIN &&
+				    rc <= RTAS_EXTENDED_DELAY_MAX));
+
+	if (rc < 0)
+		return rtas_error_rc(rc);
+	return rc;
+}
+
 bool rtas_indicator_present(int token, int *maxindex)
 {
 	int proplen, count, i;
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -187,7 +187,8 @@ static irqreturn_t ras_epow_interrupt(in
 	int state;
 	int critical;
 
-	status = rtas_get_sensor(EPOW_SENSOR_TOKEN, EPOW_SENSOR_INDEX, &state);
+	status = rtas_get_sensor_fast(EPOW_SENSOR_TOKEN, EPOW_SENSOR_INDEX,
+				      &state);
 
 	if (state > 3)
 		critical = 1;		/* Time Critical */

[PATCH 3.14 16/84] powerpc/mm: Recompute hash value after a failed update

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>

commit 36b35d5d807b7e57aff7d08e63de8b17731ee211 upstream.

If we had secondary hash flag set, we ended up modifying hash value in
the updatepp code path. Hence with a failed updatepp we will be using
a wrong hash value for the following hash insert. Fix this by
recomputing hash before insert.

Without this patch we can end up with using wrong slot number in linux
pte. That can result in us missing an hash pte update or invalidate
which can cause memory corruption or even machine check.

Fixes: 6d492ecc6489 ("powerpc/THP: Add code to handle HPTE faults for hugepages")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/mm/hugepage-hash64.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/powerpc/mm/hugepage-hash64.c
+++ b/arch/powerpc/mm/hugepage-hash64.c
@@ -136,7 +136,6 @@ int __hash_page_thp(unsigned long ea, un
 	BUG_ON(index >= 4096);
 
 	vpn = hpt_vpn(ea, vsid, ssize);
-	hash = hpt_hash(vpn, shift, ssize);
 	hpte_slot_array = get_hpte_slot_array(pmdp);
 	if (psize == MMU_PAGE_4K) {
 		/*
@@ -151,6 +150,7 @@ int __hash_page_thp(unsigned long ea, un
 	valid = hpte_valid(hpte_slot_array, index);
 	if (valid) {
 		/* update the hpte bits */
+		hash = hpt_hash(vpn, shift, ssize);
 		hidx =  hpte_hash_index(hpte_slot_array, index);
 		if (hidx & _PTEIDX_SECONDARY)
 			hash = ~hash;
@@ -176,6 +176,7 @@ int __hash_page_thp(unsigned long ea, un
 	if (!valid) {
 		unsigned long hpte_group;
 
+		hash = hpt_hash(vpn, shift, ssize);
 		/* insert new entry */
 		pa = pmd_pfn(__pmd(old_pmd)) << PAGE_SHIFT;
 		new_pmd |= _PAGE_HASHPTE;

[PATCH 3.14 17/84] CIFS: fix type confusion in copy offload ioctl

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jann Horn <jann@thejh.net>

commit 4c17a6d56bb0cad3066a714e94f7185a24b40f49 upstream.

This might lead to local privilege escalation (code execution as
kernel) for systems where the following conditions are met:

 - CONFIG_CIFS_SMB2 and CONFIG_CIFS_POSIX are enabled
 - a cifs filesystem is mounted where:
  - the mount option "vers" was used and set to a value >=2.0
  - the attacker has write access to at least one file on the filesystem

To attack this, an attacker would have to guess the target_tcon
pointer (but guessing wrong doesn't cause a crash, it just returns an
error code) and win a narrow race.

Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/ioctl.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/fs/cifs/ioctl.c
+++ b/fs/cifs/ioctl.c
@@ -67,6 +67,12 @@ static long cifs_ioctl_clone(unsigned in
 		goto out_drop_write;
 	}
 
+	if (src_file.file->f_op->unlocked_ioctl != cifs_ioctl) {
+		rc = -EBADF;
+		cifs_dbg(VFS, "src file seems to be from a different filesystem type\n");
+		goto out_fput;
+	}
+
 	if ((!src_file.file->private_data) || (!dst_file->private_data)) {
 		rc = -EBADF;
 		cifs_dbg(VFS, "missing cifsFileInfo on copy range src file\n");

[PATCH 3.14 18/84] Add radeon suspend/resume quirk for HP Compaq dc5750.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeffery Miller <jmiller@neverware.com>

commit 09bfda10e6efd7b65bcc29237bee1765ed779657 upstream.

With the radeon driver loaded the HP Compaq dc5750
Small Form Factor machine fails to resume from suspend.
Adding a quirk similar to other devices avoids
the problem and the system resumes properly.

Signed-off-by: Jeffery Miller <jmiller@neverware.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_combios.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -3387,6 +3387,14 @@ void radeon_combios_asic_init(struct drm
 	    rdev->pdev->subsystem_device == 0x30ae)
 		return;
 
+	/* quirk for rs4xx HP Compaq dc5750 Small Form Factor to make it resume
+	 * - it hangs on resume inside the dynclk 1 table.
+	 */
+	if (rdev->family == CHIP_RS480 &&
+	    rdev->pdev->subsystem_vendor == 0x103c &&
+	    rdev->pdev->subsystem_device == 0x280a)
+		return;
+
 	/* DYN CLK 1 */
 	table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE);
 	if (table)

[PATCH 3.14 19/84] mm: check if section present during memory block registering

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yinghai Lu <yinghai@kernel.org>

commit 04697858d89e4bf2650364f8d6956e2554e8ef88 upstream.

Tony Luck found on his setup, if memory block size 512M will cause crash
during booting.

  BUG: unable to handle kernel paging request at ffffea0074000020
  IP: get_nid_for_pfn+0x17/0x40
  PGD 128ffcb067 PUD 128ffc9067 PMD 0
  Oops: 0000 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc8 #1
  ...
  Call Trace:
     ? register_mem_sect_under_node+0x66/0xe0
     register_one_node+0x17b/0x240
     ? pci_iommu_alloc+0x6e/0x6e
     topology_init+0x3c/0x95
     do_one_initcall+0xcd/0x1f0

The system has non continuous RAM address:
 BIOS-e820: [mem 0x0000001300000000-0x0000001cffffffff] usable
 BIOS-e820: [mem 0x0000001d70000000-0x0000001ec7ffefff] usable
 BIOS-e820: [mem 0x0000001f00000000-0x0000002bffffffff] usable
 BIOS-e820: [mem 0x0000002c18000000-0x0000002d6fffefff] usable
 BIOS-e820: [mem 0x0000002e00000000-0x00000039ffffffff] usable

So there are start sections in memory block not present.  For example:

    memory block : [0x2c18000000, 0x2c20000000) 512M

first three sections are not present.

The current register_mem_sect_under_node() assume first section is
present, but memory block section number range [start_section_nr,
end_section_nr] would include not present section.

For arch that support vmemmap, we don't setup memmap for struct page
area within not present sections area.

So skip the pfn range that belong to absent section.

[akpm@linux-foundation.org: simplification]
[rientjes@google.com: more simplification]
Fixes: bdee237c0343 ("x86: mm: Use 2GB memory block size on large memory x86-64 systems")
Fixes: 982792c782ef ("x86, mm: probe memory block size for generic x86 64bit")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/node.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -399,6 +399,16 @@ int register_mem_sect_under_node(struct
 	for (pfn = sect_start_pfn; pfn <= sect_end_pfn; pfn++) {
 		int page_nid;
 
+		/*
+		 * memory block could have several absent sections from start.
+		 * skip pfn range from absent section
+		 */
+		if (!pfn_present(pfn)) {
+			pfn = round_down(pfn + PAGES_PER_SECTION,
+					 PAGES_PER_SECTION) - 1;
+			continue;
+		}
+
 		page_nid = get_nid_for_pfn(pfn);
 		if (page_nid < 0)
 			continue;

[PATCH 3.14 20/84] x86/mm: Initialize pmd_idx in page_table_range_init_count()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Minfei Huang <mnfhuang@gmail.com>

commit 9962eea9e55f797f05f20ba6448929cab2a9f018 upstream.

The variable pmd_idx is not initialized for the first iteration of the
for loop.

Assign the proper value which indexes the start address.

Fixes: 719272c45b82 'x86, mm: only call early_ioremap_page_table_range_init() once'
Signed-off-by: Minfei Huang <mnfhuang@gmail.com>
Cc: tony.luck@intel.com
Cc: wangnan0@huawei.com
Cc: david.vrabel@citrix.com
Reviewed-by: yinghai@kernel.org
Link: http://lkml.kernel.org/r/1436703522-29552-1-git-send-email-mhuang@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/init_32.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -137,6 +137,7 @@ page_table_range_init_count(unsigned lon
 
 	vaddr = start;
 	pgd_idx = pgd_index(vaddr);
+	pmd_idx = pmd_index(vaddr);
 
 	for ( ; (pgd_idx < PTRS_PER_PGD) && (vaddr != end); pgd_idx++) {
 		for (; (pmd_idx < PTRS_PER_PMD) && (vaddr != end);

[PATCH 3.14 22/84] [media] v4l: omap3isp: Fix sub-device power management code

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sakari Ailus <sakari.ailus@iki.fi>

commit 9d39f05490115bf145e5ea03c0b7ec9d3d015b01 upstream.

Commit 813f5c0ac5cc ("media: Change media device link_notify behaviour")
modified the media controller link setup notification API and updated the
OMAP3 ISP driver accordingly. As a side effect it introduced a bug by
turning power on after setting the link instead of before. This results in
sub-devices not being powered down in some cases when they should be. Fix
it.

Fixes: 813f5c0ac5cc [media] media: Change media device link_notify behaviour

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/platform/omap3isp/isp.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -824,14 +824,14 @@ static int isp_pipeline_link_notify(stru
 	int ret;
 
 	if (notification == MEDIA_DEV_NOTIFY_POST_LINK_CH &&
-	    !(link->flags & MEDIA_LNK_FL_ENABLED)) {
+	    !(flags & MEDIA_LNK_FL_ENABLED)) {
 		/* Powering off entities is assumed to never fail. */
 		isp_pipeline_pm_power(source, -sink_use);
 		isp_pipeline_pm_power(sink, -source_use);
 		return 0;
 	}
 
-	if (notification == MEDIA_DEV_NOTIFY_POST_LINK_CH &&
+	if (notification == MEDIA_DEV_NOTIFY_PRE_LINK_CH &&
 		(flags & MEDIA_LNK_FL_ENABLED)) {
 
 		ret = isp_pipeline_pm_power(source, sink_use);

[PATCH 3.14 23/84] Btrfs: check if previous transaction aborted to avoid fs corruption

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>

commit 1f9b8c8fbc9a4d029760b16f477b9d15500e3a34 upstream.

While we are committing a transaction, it's possible the previous one is
still finishing its commit and therefore we wait for it to finish first.
However we were not checking if that previous transaction ended up getting
aborted after we waited for it to commit, so we ended up committing the
current transaction which can lead to fs corruption because the new
superblock can point to trees that have had one or more nodes/leafs that
were never durably persisted.
The following sequence diagram exemplifies how this is possible:

          CPU 0                                                        CPU 1

  transaction N starts

  (...)

  btrfs_commit_transaction(N)

    cur_trans->state = TRANS_STATE_COMMIT_START;
    (...)
    cur_trans->state = TRANS_STATE_COMMIT_DOING;
    (...)

    cur_trans->state = TRANS_STATE_UNBLOCKED;
    root->fs_info->running_transaction = NULL;

                                                              btrfs_start_transaction()
                                                                 --> starts transaction N + 1

    btrfs_write_and_wait_transaction(trans, root);
      --> starts writing all new or COWed ebs created
          at transaction N

                                                              creates some new ebs, COWs some
                                                              existing ebs but doesn't COW or
                                                              deletes eb X

                                                              btrfs_commit_transaction(N + 1)
                                                                (...)
                                                                cur_trans->state = TRANS_STATE_COMMIT_START;
                                                                (...)
                                                                wait_for_commit(root, prev_trans);
                                                                  --> prev_trans == transaction N

    btrfs_write_and_wait_transaction() continues
    writing ebs
       --> fails writing eb X, we abort transaction N
           and set bit BTRFS_FS_STATE_ERROR on
           fs_info->fs_state, so no new transactions
           can start after setting that bit

       cleanup_transaction()
         btrfs_cleanup_one_transaction()
           wakes up task at CPU 1

                                                                continues, doesn't abort because
                                                                cur_trans->aborted (transaction N + 1)
                                                                is zero, and no checks for bit
                                                                BTRFS_FS_STATE_ERROR in fs_info->fs_state
                                                                are made

                                                                btrfs_write_and_wait_transaction(trans, root);
                                                                  --> succeeds, no errors during writeback

                                                                write_ctree_super(trans, root, 0);
                                                                  --> succeeds
                                                                  --> we have now a superblock that points us
                                                                      to some root that uses eb X, which was
                                                                      never written to disk

In this scenario future attempts to read eb X from disk results in an
error message like "parent transid verify failed on X wanted Y found Z".

So fix this by aborting the current transaction if after waiting for the
previous transaction we verify that it was aborted.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/transaction.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -1710,8 +1710,11 @@ int btrfs_commit_transaction(struct btrf
 			spin_unlock(&root->fs_info->trans_lock);
 
 			wait_for_commit(root, prev_trans);
+			ret = prev_trans->aborted;
 
 			btrfs_put_transaction(prev_trans);
+			if (ret)
+				goto cleanup_transaction;
 		} else {
 			spin_unlock(&root->fs_info->trans_lock);
 		}

[PATCH 3.14 24/84] NFSv4: dont set SETATTR for O_RDONLY|O_EXCL

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.com>

commit efcbc04e16dfa95fef76309f89710dd1d99a5453 upstream.

It is unusual to combine the open flags O_RDONLY and O_EXCL, but
it appears that libre-office does just that.

[pid  3250] stat("/home/USER/.config", {st_mode=S_IFDIR|0700, st_size=8192, ...}) = 0
[pid  3250] open("/home/USER/.config/libreoffice/4-suse/user/extensions/buildid", O_RDONLY|O_EXCL <unfinished ...>

NFSv4 takes O_EXCL as a sign that a setattr command should be sent,
probably to reset the timestamps.

When it was an O_RDONLY open, the SETATTR command does not
identify any actual attributes to change.
If no delegation was provided to the open, the SETATTR uses the
all-zeros stateid and the request is accepted (at least by the
Linux NFS server - no harm, no foul).

If a read-delegation was provided, this is used in the SETATTR
request, and a Netapp filer will justifiably claim
NFS4ERR_BAD_STATEID, which the Linux client takes as a sign
to retry - indefinitely.

So only treat O_EXCL specially if O_CREAT was also given.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2275,7 +2275,7 @@ static int _nfs4_do_open(struct inode *d
 		goto err_free_label;
 	state = ctx->state;
 
-	if ((opendata->o_arg.open_flags & O_EXCL) &&
+	if ((opendata->o_arg.open_flags & (O_CREAT|O_EXCL)) == (O_CREAT|O_EXCL) &&
 	    (opendata->o_arg.createmode != NFS4_CREATE_GUARDED)) {
 		nfs4_exclusive_attrset(opendata, sattr);
 

[PATCH 3.14 25/84] NFS: Fix a NULL pointer dereference of migration recovery ops for v4.2 client

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kinglong Mee <kinglongmee@gmail.com>

commit 18e3b739fdc826481c6a1335ce0c5b19b3d415da upstream.

---Steps to Reproduce--
<nfs-server>
# cat /etc/exports
/nfs/referal  *(rw,insecure,no_subtree_check,no_root_squash,crossmnt)
/nfs/old      *(ro,insecure,subtree_check,root_squash,crossmnt)

<nfs-client>
# mount -t nfs nfs-server:/nfs/ /mnt/
# ll /mnt/*/

<nfs-server>
# cat /etc/exports
/nfs/referal   *(rw,insecure,no_subtree_check,no_root_squash,crossmnt,refer=/nfs/old/@nfs-server)
/nfs/old       *(ro,insecure,subtree_check,root_squash,crossmnt)
# service nfs restart

<nfs-client>
# ll /mnt/*/    --->>>>> oops here

[ 5123.102925] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 5123.103363] IP: [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4]
[ 5123.103752] PGD 587b9067 PUD 3cbf5067 PMD 0
[ 5123.104131] Oops: 0000 [#1]
[ 5123.104529] Modules linked in: nfsv4(OE) nfs(OE) fscache(E) nfsd(OE) xfs libcrc32c iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi coretemp crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev vmw_balloon parport_pc parport i2c_piix4 shpchp auth_rpcgss nfs_acl vmw_vmci lockd grace sunrpc vmwgfx drm_kms_helper ttm drm mptspi serio_raw scsi_transport_spi e1000 mptscsih mptbase ata_generic pata_acpi [last unloaded: nfsd]
[ 5123.105887] CPU: 0 PID: 15853 Comm: ::1-manager Tainted: G           OE   4.2.0-rc6+ #214
[ 5123.106358] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014
[ 5123.106860] task: ffff88007620f300 ti: ffff88005877c000 task.ti: ffff88005877c000
[ 5123.107363] RIP: 0010:[<ffffffffa03ed38b>]  [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4]
[ 5123.107909] RSP: 0018:ffff88005877fdb8  EFLAGS: 00010246
[ 5123.108435] RAX: ffff880053f3bc00 RBX: ffff88006ce6c908 RCX: ffff880053a0d240
[ 5123.108968] RDX: ffffea0000e6d940 RSI: ffff8800399a0000 RDI: ffff88006ce6c908
[ 5123.109503] RBP: ffff88005877fe28 R08: ffffffff81c708a0 R09: 0000000000000000
[ 5123.110045] R10: 00000000000001a2 R11: ffff88003ba7f5c8 R12: ffff880054c55800
[ 5123.110618] R13: 0000000000000000 R14: ffff880053a0d240 R15: ffff880053a0d240
[ 5123.111169] FS:  0000000000000000(0000) GS:ffffffff81c27000(0000) knlGS:0000000000000000
[ 5123.111726] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5123.112286] CR2: 0000000000000000 CR3: 0000000054cac000 CR4: 00000000001406f0
[ 5123.112888] Stack:
[ 5123.113458]  ffffea0000e6d940 ffff8800399a0000 00000000000167d0 0000000000000000
[ 5123.114049]  0000000000000000 0000000000000000 0000000000000000 00000000a7ec82c6
[ 5123.114662]  ffff88005877fe18 ffffea0000e6d940 ffff8800399a0000 ffff880054c55800
[ 5123.115264] Call Trace:
[ 5123.115868]  [<ffffffffa03fb44b>] nfs4_try_migration+0xbb/0x220 [nfsv4]
[ 5123.116487]  [<ffffffffa03fcb3b>] nfs4_run_state_manager+0x4ab/0x7b0 [nfsv4]
[ 5123.117104]  [<ffffffffa03fc690>] ? nfs4_do_reclaim+0x510/0x510 [nfsv4]
[ 5123.117813]  [<ffffffff810a4527>] kthread+0xd7/0xf0
[ 5123.118456]  [<ffffffff810a4450>] ? kthread_worker_fn+0x160/0x160
[ 5123.119108]  [<ffffffff816d9cdf>] ret_from_fork+0x3f/0x70
[ 5123.119723]  [<ffffffff810a4450>] ? kthread_worker_fn+0x160/0x160
[ 5123.120329] Code: 4c 8b 6a 58 74 17 eb 52 48 8d 55 a8 89 c6 4c 89 e7 e8 4a b5 ff ff 8b 45 b0 85 c0 74 1c 4c 89 f9 48 8b 55 90 48 8b 75 98 48 89 df <41> ff 55 00 3d e8 d8 ff ff 41 89 c6 74 cf 48 8b 4d c8 65 48 33
[ 5123.121643] RIP  [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4]
[ 5123.122308]  RSP <ffff88005877fdb8>
[ 5123.122942] CR2: 0000000000000000

Fixes: ec011fe847 ("NFS: Introduce a vector of migration recovery ops")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -8368,6 +8368,7 @@ static const struct nfs4_minor_version_o
 	.reboot_recovery_ops = &nfs41_reboot_recovery_ops,
 	.nograce_recovery_ops = &nfs41_nograce_recovery_ops,
 	.state_renewal_ops = &nfs41_state_renewal_ops,
+	.mig_recovery_ops = &nfs41_mig_recovery_ops,
 };
 #endif
 

[PATCH 3.14 26/84] NFS: nfs_set_pgio_error sometimes misses errors

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>

commit e9ae58aeee8842a50f7e199d602a5ccb2e41a95f upstream.

We should ensure that we always set the pgio_header's error field
if a READ or WRITE RPC call returns an error. The current code depends
on 'hdr->good_bytes' always being initialised to a large value, which
is not always done correctly by callers.
When this happens, applications may end up missing important errors.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/pagelist.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -60,8 +60,8 @@ EXPORT_SYMBOL_GPL(nfs_pgheader_init);
 void nfs_set_pgio_error(struct nfs_pgio_header *hdr, int error, loff_t pos)
 {
 	spin_lock(&hdr->lock);
-	if (pos < hdr->io_start + hdr->good_bytes) {
-		set_bit(NFS_IOHDR_ERROR, &hdr->flags);
+	if (!test_and_set_bit(NFS_IOHDR_ERROR, &hdr->flags)
+	    || pos < hdr->io_start + hdr->good_bytes) {
 		clear_bit(NFS_IOHDR_EOF, &hdr->flags);
 		hdr->good_bytes = pos - hdr->io_start;
 		hdr->error = error;

[PATCH 3.14 27/84] parisc: Use double word condition in 64bit CAS operation

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John David Anglin <dave.anglin@bell.net>

commit 1b59ddfcf1678de38a1f8ca9fb8ea5eebeff1843 upstream.

The attached change fixes the condition used in the "sub" instruction.
A double word comparison is needed.  This fixes the 64-bit LWS CAS
operation on 64-bit kernels.

I can now enable 64-bit atomic support in GCC.

Signed-off-by: John David Anglin <dave.anglin>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/parisc/kernel/syscall.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -821,7 +821,7 @@ cas2_action:
 	/* 64bit CAS */
 #ifdef CONFIG_64BIT
 19:	ldd,ma	0(%sr3,%r26), %r29
-	sub,=	%r29, %r25, %r0
+	sub,*=	%r29, %r25, %r0
 	b,n	cas2_end
 20:	std,ma	%r24, 0(%sr3,%r26)
 	copy	%r0, %r28

[PATCH 3.14 28/84] parisc: Filter out spurious interrupts in PA-RISC irq handler

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helge Deller <deller@gmx.de>

commit b1b4e435e4ef7de77f07bf2a42c8380b960c2d44 upstream.

When detecting a serial port on newer PA-RISC machines (with iosapic) we have a
long way to go to find the right IRQ line, registering it, then registering the
serial port and the irq handler for the serial port. During this phase spurious
interrupts for the serial port may happen which then crashes the kernel because
the action handler might not have been set up yet.

So, basically it's a race condition between the serial port hardware and the
CPU which sets up the necessary fields in the irq sructs. The main reason for
this race is, that we unmask the serial port irqs too early without having set
up everything properly before (which isn't easily possible because we need the
IRQ number to register the serial ports).

This patch is a work-around for this problem. It adds checks to the CPU irq
handler to verify if the IRQ action field has been initialized already. If not,
we just skip this interrupt (which isn't critical for a serial port at bootup).
The real fix would probably involve rewriting all PA-RISC specific IRQ code
(for CPU, IOSAPIC, GSC and EISA) to use IRQ domains with proper parenting of
the irq chips and proper irq enabling along this line.

This bug has been in the PA-RISC port since the beginning, but the crashes
happened very rarely with currently used hardware.  But on the latest machine
which I bought (a C8000 workstation), which uses the fastest CPUs (4 x PA8900,
1GHz) and which has the largest possible L1 cache size (64MB each), the kernel
crashed at every boot because of this race. So, without this patch the machine
would currently be unuseable.

For the record, here is the flow logic:
1. serial_init_chip() in 8250_gsc.c calls iosapic_serial_irq().
2. iosapic_serial_irq() calls txn_alloc_irq() to find the irq.
3. iosapic_serial_irq() calls cpu_claim_irq() to register the CPU irq
4. cpu_claim_irq() unmasks the CPU irq (which it shouldn't!)
5. serial_init_chip() then registers the 8250 port.
Problems:
- In step 4 the CPU irq shouldn't have been registered yet, but after step 5
- If serial irq happens between 4 and 5 have finished, the kernel will crash

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/parisc/kernel/irq.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -507,8 +507,8 @@ void do_cpu_irq_mask(struct pt_regs *reg
 	struct pt_regs *old_regs;
 	unsigned long eirr_val;
 	int irq, cpu = smp_processor_id();
-#ifdef CONFIG_SMP
 	struct irq_desc *desc;
+#ifdef CONFIG_SMP
 	cpumask_t dest;
 #endif
 
@@ -521,8 +521,12 @@ void do_cpu_irq_mask(struct pt_regs *reg
 		goto set_out;
 	irq = eirr_to_irq(eirr_val);
 
-#ifdef CONFIG_SMP
+	/* Filter out spurious interrupts, mostly from serial port at bootup */
 	desc = irq_to_desc(irq);
+	if (unlikely(!desc->action))
+		goto set_out;
+
+#ifdef CONFIG_SMP
 	cpumask_copy(&dest, desc->irq_data.affinity);
 	if (irqd_is_per_cpu(&desc->irq_data) &&
 	    !cpu_isset(smp_processor_id(), dest)) {

[PATCH 3.14 29/84] vmscan: fix increasing nr_isolated incurred by putback unevictable pages

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jaewon Kim <jaewon31.kim@samsung.com>

commit c54839a722a02818677bcabe57e957f0ce4f841d upstream.

reclaim_clean_pages_from_list() assumes that shrink_page_list() returns
number of pages removed from the candidate list.  But shrink_page_list()
puts back mlocked pages without passing it to caller and without
counting as nr_reclaimed.  This increases nr_isolated.

To fix this, this patch changes shrink_page_list() to pass unevictable
pages back to caller.  Caller will take care those pages.

Minchan said:

It fixes two issues.

1. With unevictable page, cma_alloc will be successful.

Exactly speaking, cma_alloc of current kernel will fail due to
unevictable pages.

2. fix leaking of NR_ISOLATED counter of vmstat

With it, too_many_isolated works.  Otherwise, it could make hang until
the process get SIGKILL.

Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/vmscan.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1087,7 +1087,7 @@ cull_mlocked:
 		if (PageSwapCache(page))
 			try_to_free_swap(page);
 		unlock_page(page);
-		putback_lru_page(page);
+		list_add(&page->lru, &ret_pages);
 		continue;
 
 activate_locked:

[PATCH 3.14 30/84] fs: if a coredump already exists, unlink and recreate with O_EXCL

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jann Horn <jann@thejh.net>

commit fbb1816942c04429e85dbf4c1a080accc534299e upstream.

It was possible for an attacking user to trick root (or another user) into
writing his coredumps into an attacker-readable, pre-existing file using
rename() or link(), causing the disclosure of secret data from the victim
process' virtual memory.  Depending on the configuration, it was also
possible to trick root into overwriting system files with coredumps.  Fix
that issue by never writing coredumps into existing files.

Requirements for the attack:
 - The attack only applies if the victim's process has a nonzero
   RLIMIT_CORE and is dumpable.
 - The attacker can trick the victim into coredumping into an
   attacker-writable directory D, either because the core_pattern is
   relative and the victim's cwd is attacker-writable or because an
   absolute core_pattern pointing to a world-writable directory is used.
 - The attacker has one of these:
  A: on a system with protected_hardlinks=0:
     execute access to a folder containing a victim-owned,
     attacker-readable file on the same partition as D, and the
     victim-owned file will be deleted before the main part of the attack
     takes place. (In practice, there are lots of files that fulfill
     this condition, e.g. entries in Debian's /var/lib/dpkg/info/.)
     This does not apply to most Linux systems because most distros set
     protected_hardlinks=1.
  B: on a system with protected_hardlinks=1:
     execute access to a folder containing a victim-owned,
     attacker-readable and attacker-writable file on the same partition
     as D, and the victim-owned file will be deleted before the main part
     of the attack takes place.
     (This seems to be uncommon.)
  C: on any system, independent of protected_hardlinks:
     write access to a non-sticky folder containing a victim-owned,
     attacker-readable file on the same partition as D
     (This seems to be uncommon.)

The basic idea is that the attacker moves the victim-owned file to where
he expects the victim process to dump its core.  The victim process dumps
its core into the existing file, and the attacker reads the coredump from
it.

If the attacker can't move the file because he does not have write access
to the containing directory, he can instead link the file to a directory
he controls, then wait for the original link to the file to be deleted
(because the kernel checks that the link count of the corefile is 1).

A less reliable variant that requires D to be non-sticky works with link()
and does not require deletion of the original link: link() the file into
D, but then unlink() it directly before the kernel performs the link count
check.

On systems with protected_hardlinks=0, this variant allows an attacker to
not only gain information from coredumps, but also clobber existing,
victim-writable files with coredumps.  (This could theoretically lead to a
privilege escalation.)

Signed-off-by: Jann Horn <jann@thejh.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/coredump.c |   38 ++++++++++++++++++++++++++++++++------
 1 file changed, 32 insertions(+), 6 deletions(-)

--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -498,10 +498,10 @@ void do_coredump(const siginfo_t *siginf
 	const struct cred *old_cred;
 	struct cred *cred;
 	int retval = 0;
-	int flag = 0;
 	int ispipe;
 	struct files_struct *displaced;
-	bool need_nonrelative = false;
+	/* require nonrelative corefile path and be extra careful */
+	bool need_suid_safe = false;
 	bool core_dumped = false;
 	static atomic_t core_dump_count = ATOMIC_INIT(0);
 	struct coredump_params cprm = {
@@ -535,9 +535,8 @@ void do_coredump(const siginfo_t *siginf
 	 */
 	if (__get_dumpable(cprm.mm_flags) == SUID_DUMP_ROOT) {
 		/* Setuid core dump mode */
-		flag = O_EXCL;		/* Stop rewrite attacks */
 		cred->fsuid = GLOBAL_ROOT_UID;	/* Dump root private */
-		need_nonrelative = true;
+		need_suid_safe = true;
 	}
 
 	retval = coredump_wait(siginfo->si_signo, &core_state);
@@ -618,7 +617,7 @@ void do_coredump(const siginfo_t *siginf
 		if (cprm.limit < binfmt->min_coredump)
 			goto fail_unlock;
 
-		if (need_nonrelative && cn.corename[0] != '/') {
+		if (need_suid_safe && cn.corename[0] != '/') {
 			printk(KERN_WARNING "Pid %d(%s) can only dump core "\
 				"to fully qualified path!\n",
 				task_tgid_vnr(current), current->comm);
@@ -626,8 +625,35 @@ void do_coredump(const siginfo_t *siginf
 			goto fail_unlock;
 		}
 
+		/*
+		 * Unlink the file if it exists unless this is a SUID
+		 * binary - in that case, we're running around with root
+		 * privs and don't want to unlink another user's coredump.
+		 */
+		if (!need_suid_safe) {
+			mm_segment_t old_fs;
+
+			old_fs = get_fs();
+			set_fs(KERNEL_DS);
+			/*
+			 * If it doesn't exist, that's fine. If there's some
+			 * other problem, we'll catch it at the filp_open().
+			 */
+			(void) sys_unlink((const char __user *)cn.corename);
+			set_fs(old_fs);
+		}
+
+		/*
+		 * There is a race between unlinking and creating the
+		 * file, but if that causes an EEXIST here, that's
+		 * fine - another process raced with us while creating
+		 * the corefile, and the other process won. To userspace,
+		 * what matters is that at least one of the two processes
+		 * writes its coredump successfully, not which one.
+		 */
 		cprm.file = filp_open(cn.corename,
-				 O_CREAT | 2 | O_NOFOLLOW | O_LARGEFILE | flag,
+				 O_CREAT | 2 | O_NOFOLLOW |
+				 O_LARGEFILE | O_EXCL,
 				 0600);
 		if (IS_ERR(cprm.file))
 			goto fail_unlock;

[PATCH 3.14 31/84] mmc: core: fix race condition in mmc_wait_data_done

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jialing Fu <jlfu@marvell.com>

commit 71f8a4b81d040b3d094424197ca2f1bf811b1245 upstream.

The following panic is captured in ker3.14, but the issue still exists
in latest kernel.
---------------------------------------------------------------------
[   20.738217] c0 3136 (Compiler) Unable to handle kernel NULL pointer dereference
at virtual address 00000578
......
[   20.738499] c0 3136 (Compiler) PC is at _raw_spin_lock_irqsave+0x24/0x60
[   20.738527] c0 3136 (Compiler) LR is at _raw_spin_lock_irqsave+0x20/0x60
[   20.740134] c0 3136 (Compiler) Call trace:
[   20.740165] c0 3136 (Compiler) [<ffffffc0008ee900>] _raw_spin_lock_irqsave+0x24/0x60
[   20.740200] c0 3136 (Compiler) [<ffffffc0000dd024>] __wake_up+0x1c/0x54
[   20.740230] c0 3136 (Compiler) [<ffffffc000639414>] mmc_wait_data_done+0x28/0x34
[   20.740262] c0 3136 (Compiler) [<ffffffc0006391a0>] mmc_request_done+0xa4/0x220
[   20.740314] c0 3136 (Compiler) [<ffffffc000656894>] sdhci_tasklet_finish+0xac/0x264
[   20.740352] c0 3136 (Compiler) [<ffffffc0000a2b58>] tasklet_action+0xa0/0x158
[   20.740382] c0 3136 (Compiler) [<ffffffc0000a2078>] __do_softirq+0x10c/0x2e4
[   20.740411] c0 3136 (Compiler) [<ffffffc0000a24bc>] irq_exit+0x8c/0xc0
[   20.740439] c0 3136 (Compiler) [<ffffffc00008489c>] handle_IRQ+0x48/0xac
[   20.740469] c0 3136 (Compiler) [<ffffffc000081428>] gic_handle_irq+0x38/0x7c
----------------------------------------------------------------------
Because in SMP, "mrq" has race condition between below two paths:
path1: CPU0: <tasklet context>
  static void mmc_wait_data_done(struct mmc_request *mrq)
  {
     mrq->host->context_info.is_done_rcv = true;
     //
     // If CPU0 has just finished "is_done_rcv = true" in path1, and at
     // this moment, IRQ or ICache line missing happens in CPU0.
     // What happens in CPU1 (path2)?
     //
     // If the mmcqd thread in CPU1(path2) hasn't entered to sleep mode:
     // path2 would have chance to break from wait_event_interruptible
     // in mmc_wait_for_data_req_done and continue to run for next
     // mmc_request (mmc_blk_rw_rq_prep).
     //
     // Within mmc_blk_rq_prep, mrq is cleared to 0.
     // If below line still gets host from "mrq" as the result of
     // compiler, the panic happens as we traced.
     wake_up_interruptible(&mrq->host->context_info.wait);
  }

path2: CPU1: <The mmcqd thread runs mmc_queue_thread>
  static int mmc_wait_for_data_req_done(...
  {
     ...
     while (1) {
           wait_event_interruptible(context_info->wait,
                   (context_info->is_done_rcv ||
                    context_info->is_new_req));
     	   static void mmc_blk_rw_rq_prep(...
           {
           ...
           memset(brq, 0, sizeof(struct mmc_blk_request));

This issue happens very coincidentally; however adding mdelay(1) in
mmc_wait_data_done as below could duplicate it easily.

   static void mmc_wait_data_done(struct mmc_request *mrq)
   {
     mrq->host->context_info.is_done_rcv = true;
+    mdelay(1);
     wake_up_interruptible(&mrq->host->context_info.wait);
    }

At runtime, IRQ or ICache line missing may just happen at the same place
of the mdelay(1).

This patch gets the mmc_context_info at the beginning of function, it can
avoid this race condition.

Signed-off-by: Jialing Fu <jlfu@marvell.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Fixes: 2220eedfd7ae ("mmc: fix async request mechanism ....")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/core/core.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -329,8 +329,10 @@ EXPORT_SYMBOL(mmc_start_bkops);
  */
 static void mmc_wait_data_done(struct mmc_request *mrq)
 {
-	mrq->host->context_info.is_done_rcv = true;
-	wake_up_interruptible(&mrq->host->context_info.wait);
+	struct mmc_context_info *context_info = &mrq->host->context_info;
+
+	context_info->is_done_rcv = true;
+	wake_up_interruptible(&context_info->wait);
 }
 
 static void mmc_wait_done(struct mmc_request *mrq)

[PATCH 3.14 32/84] md/raid10: always set reshape_safe when initializing reshape_position.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.com>

commit 299b0685e31c9f3dcc2d58ee3beca761a40b44b3 upstream.

'reshape_position' tracks where in the reshape we have reached.
'reshape_safe' tracks where in the reshape we have safely recorded
in the metadata.

These are compared to determine when to update the metadata.
So it is important that reshape_safe is initialised properly.
Currently it isn't.  When starting a reshape from the beginning
it usually has the correct value by luck.  But when reducing the
number of devices in a RAID10, it has the wrong value and this leads
to the metadata not being updated correctly.
This can lead to corruption if the reshape is not allowed to complete.

This patch is suitable for any -stable kernel which supports RAID10
reshape, which is 3.5 and later.

Fixes: 3ea7daa5d7fd ("md/raid10: add reshape support")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/raid10.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -3585,6 +3585,7 @@ static struct r10conf *setup_conf(struct
 			/* far_copies must be 1 */
 			conf->prev.stride = conf->dev_sectors;
 	}
+	conf->reshape_safe = conf->reshape_progress;
 	spin_lock_init(&conf->device_lock);
 	INIT_LIST_HEAD(&conf->retry_list);
 
@@ -3793,7 +3794,6 @@ static int run(struct mddev *mddev)
 		}
 		conf->offset_diff = min_offset_diff;
 
-		conf->reshape_safe = conf->reshape_progress;
 		clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
 		clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
 		set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
@@ -4138,6 +4138,7 @@ static int raid10_start_reshape(struct m
 		conf->reshape_progress = size;
 	} else
 		conf->reshape_progress = 0;
+	conf->reshape_safe = conf->reshape_progress;
 	spin_unlock_irq(&conf->device_lock);
 
 	if (mddev->delta_disks && mddev->bitmap) {
@@ -4204,6 +4205,7 @@ abort:
 		rdev->new_data_offset = rdev->data_offset;
 	smp_wmb();
 	conf->reshape_progress = MaxSector;
+	conf->reshape_safe = MaxSector;
 	mddev->reshape_position = MaxSector;
 	spin_unlock_irq(&conf->device_lock);
 	return ret;
@@ -4556,6 +4558,7 @@ static void end_reshape(struct r10conf *
 	md_finish_reshape(conf->mddev);
 	smp_wmb();
 	conf->reshape_progress = MaxSector;
+	conf->reshape_safe = MaxSector;
 	spin_unlock_irq(&conf->device_lock);
 
 	/* read-ahead size must cover two whole stripes, which is

[PATCH 3.14 33/84] xen/gntdev: convert priv->lock to a mutex

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Vrabel <david.vrabel@citrix.com>

commit 1401c00e59ea021c575f74612fe2dbba36d6a4ee upstream.

Unmapping may require sleeping and we unmap while holding priv->lock, so
convert it to a mutex.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/gntdev.c |   40 ++++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 20 deletions(-)

--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -67,7 +67,7 @@ struct gntdev_priv {
 	 * Only populated if populate_freeable_maps == 1 */
 	struct list_head freeable_maps;
 	/* lock protects maps and freeable_maps */
-	spinlock_t lock;
+	struct mutex lock;
 	struct mm_struct *mm;
 	struct mmu_notifier mn;
 };
@@ -216,9 +216,9 @@ static void gntdev_put_map(struct gntdev
 	}
 
 	if (populate_freeable_maps && priv) {
-		spin_lock(&priv->lock);
+		mutex_lock(&priv->lock);
 		list_del(&map->next);
-		spin_unlock(&priv->lock);
+		mutex_unlock(&priv->lock);
 	}
 
 	if (map->pages && !use_ptemod)
@@ -387,9 +387,9 @@ static void gntdev_vma_close(struct vm_a
 		 * not do any unmapping, since that has been done prior to
 		 * closing the vma, but it may still iterate the unmap_ops list.
 		 */
-		spin_lock(&priv->lock);
+		mutex_lock(&priv->lock);
 		map->vma = NULL;
-		spin_unlock(&priv->lock);
+		mutex_unlock(&priv->lock);
 	}
 	vma->vm_private_data = NULL;
 	gntdev_put_map(priv, map);
@@ -433,14 +433,14 @@ static void mn_invl_range_start(struct m
 	struct gntdev_priv *priv = container_of(mn, struct gntdev_priv, mn);
 	struct grant_map *map;
 
-	spin_lock(&priv->lock);
+	mutex_lock(&priv->lock);
 	list_for_each_entry(map, &priv->maps, next) {
 		unmap_if_in_range(map, start, end);
 	}
 	list_for_each_entry(map, &priv->freeable_maps, next) {
 		unmap_if_in_range(map, start, end);
 	}
-	spin_unlock(&priv->lock);
+	mutex_unlock(&priv->lock);
 }
 
 static void mn_invl_page(struct mmu_notifier *mn,
@@ -457,7 +457,7 @@ static void mn_release(struct mmu_notifi
 	struct grant_map *map;
 	int err;
 
-	spin_lock(&priv->lock);
+	mutex_lock(&priv->lock);
 	list_for_each_entry(map, &priv->maps, next) {
 		if (!map->vma)
 			continue;
@@ -476,7 +476,7 @@ static void mn_release(struct mmu_notifi
 		err = unmap_grant_pages(map, /* offset */ 0, map->count);
 		WARN_ON(err);
 	}
-	spin_unlock(&priv->lock);
+	mutex_unlock(&priv->lock);
 }
 
 static struct mmu_notifier_ops gntdev_mmu_ops = {
@@ -498,7 +498,7 @@ static int gntdev_open(struct inode *ino
 
 	INIT_LIST_HEAD(&priv->maps);
 	INIT_LIST_HEAD(&priv->freeable_maps);
-	spin_lock_init(&priv->lock);
+	mutex_init(&priv->lock);
 
 	if (use_ptemod) {
 		priv->mm = get_task_mm(current);
@@ -574,10 +574,10 @@ static long gntdev_ioctl_map_grant_ref(s
 		return -EFAULT;
 	}
 
-	spin_lock(&priv->lock);
+	mutex_lock(&priv->lock);
 	gntdev_add_map(priv, map);
 	op.index = map->index << PAGE_SHIFT;
-	spin_unlock(&priv->lock);
+	mutex_unlock(&priv->lock);
 
 	if (copy_to_user(u, &op, sizeof(op)) != 0)
 		return -EFAULT;
@@ -596,7 +596,7 @@ static long gntdev_ioctl_unmap_grant_ref
 		return -EFAULT;
 	pr_debug("priv %p, del %d+%d\n", priv, (int)op.index, (int)op.count);
 
-	spin_lock(&priv->lock);
+	mutex_lock(&priv->lock);
 	map = gntdev_find_map_index(priv, op.index >> PAGE_SHIFT, op.count);
 	if (map) {
 		list_del(&map->next);
@@ -604,7 +604,7 @@ static long gntdev_ioctl_unmap_grant_ref
 			list_add_tail(&map->next, &priv->freeable_maps);
 		err = 0;
 	}
-	spin_unlock(&priv->lock);
+	mutex_unlock(&priv->lock);
 	if (map)
 		gntdev_put_map(priv, map);
 	return err;
@@ -672,7 +672,7 @@ static long gntdev_ioctl_notify(struct g
 	out_flags = op.action;
 	out_event = op.event_channel_port;
 
-	spin_lock(&priv->lock);
+	mutex_lock(&priv->lock);
 
 	list_for_each_entry(map, &priv->maps, next) {
 		uint64_t begin = map->index << PAGE_SHIFT;
@@ -700,7 +700,7 @@ static long gntdev_ioctl_notify(struct g
 	rc = 0;
 
  unlock_out:
-	spin_unlock(&priv->lock);
+	mutex_unlock(&priv->lock);
 
 	/* Drop the reference to the event channel we did not save in the map */
 	if (out_flags & UNMAP_NOTIFY_SEND_EVENT)
@@ -750,7 +750,7 @@ static int gntdev_mmap(struct file *flip
 	pr_debug("map %d+%d at %lx (pgoff %lx)\n",
 			index, count, vma->vm_start, vma->vm_pgoff);
 
-	spin_lock(&priv->lock);
+	mutex_lock(&priv->lock);
 	map = gntdev_find_map_index(priv, index, count);
 	if (!map)
 		goto unlock_out;
@@ -785,7 +785,7 @@ static int gntdev_mmap(struct file *flip
 			map->flags |= GNTMAP_readonly;
 	}
 
-	spin_unlock(&priv->lock);
+	mutex_unlock(&priv->lock);
 
 	if (use_ptemod) {
 		err = apply_to_page_range(vma->vm_mm, vma->vm_start,
@@ -813,11 +813,11 @@ static int gntdev_mmap(struct file *flip
 	return 0;
 
 unlock_out:
-	spin_unlock(&priv->lock);
+	mutex_unlock(&priv->lock);
 	return err;
 
 out_unlock_put:
-	spin_unlock(&priv->lock);
+	mutex_unlock(&priv->lock);
 out_put_map:
 	if (use_ptemod)
 		map->vma = NULL;

[PATCH 3.14 34/84] hfs: fix B-tree corruption after insertion at position 0

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hin-Tak Leung <htl10@users.sourceforge.net>

commit b4cc0efea4f0bfa2477c56af406cfcf3d3e58680 upstream.

Fix B-tree corruption when a new record is inserted at position 0 in the
node in hfs_brec_insert().

This is an identical change to the corresponding hfs b-tree code to Sergei
Antonov's "hfsplus: fix B-tree corruption after insertion at position 0",
to keep similar code paths in the hfs and hfsplus drivers in sync, where
appropriate.

Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Cc: Sergei Antonov <saproj@gmail.com>
Cc: Joe Perches <joe@perches.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/hfs/brec.c |   20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

--- a/fs/hfs/brec.c
+++ b/fs/hfs/brec.c
@@ -131,13 +131,16 @@ skip:
 	hfs_bnode_write(node, entry, data_off + key_len, entry_len);
 	hfs_bnode_dump(node);
 
-	if (new_node) {
-		/* update parent key if we inserted a key
-		 * at the start of the first node
-		 */
-		if (!rec && new_node != node)
-			hfs_brec_update_parent(fd);
+	/*
+	 * update parent key if we inserted a key
+	 * at the start of the node and it is not the new node
+	 */
+	if (!rec && new_node != node) {
+		hfs_bnode_read_key(node, fd->search_key, data_off + size);
+		hfs_brec_update_parent(fd);
+	}
 
+	if (new_node) {
 		hfs_bnode_put(fd->bnode);
 		if (!new_node->parent) {
 			hfs_btree_inc_height(tree);
@@ -166,9 +169,6 @@ skip:
 		goto again;
 	}
 
-	if (!rec)
-		hfs_brec_update_parent(fd);
-
 	return 0;
 }
 
@@ -366,6 +366,8 @@ again:
 	if (IS_ERR(parent))
 		return PTR_ERR(parent);
 	__hfs_brec_find(parent, fd);
+	if (fd->record < 0)
+		return -ENOENT;
 	hfs_bnode_dump(parent);
 	rec = fd->record;
 

[PATCH 3.14 35/84] IB/qib: Change lkey table allocation to support more MRs

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Marciniszyn <mike.marciniszyn@intel.com>

commit d6f1c17e162b2a11e708f28fa93f2f79c164b442 upstream.

The lkey table is allocated with with a get_user_pages() with an
order based on a number of index bits from a module parameter.

The underlying kernel code cannot allocate that many contiguous pages.

There is no reason the underlying memory needs to be physically
contiguous.

This patch:
- switches the allocation/deallocation to vmalloc/vfree
- caps the number of bits to 23 to insure at least 1 generation bit
  o this matches the module parameter description

Reviewed-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/qib/qib_keys.c  |    4 ++++
 drivers/infiniband/hw/qib/qib_verbs.c |   14 ++++++++++----
 drivers/infiniband/hw/qib/qib_verbs.h |    2 ++
 3 files changed, 16 insertions(+), 4 deletions(-)

--- a/drivers/infiniband/hw/qib/qib_keys.c
+++ b/drivers/infiniband/hw/qib/qib_keys.c
@@ -86,6 +86,10 @@ int qib_alloc_lkey(struct qib_mregion *m
 	 * unrestricted LKEY.
 	 */
 	rkt->gen++;
+	/*
+	 * bits are capped in qib_verbs.c to insure enough bits
+	 * for generation number
+	 */
 	mr->lkey = (r << (32 - ib_qib_lkey_table_size)) |
 		((((1 << (24 - ib_qib_lkey_table_size)) - 1) & rkt->gen)
 		 << 8);
--- a/drivers/infiniband/hw/qib/qib_verbs.c
+++ b/drivers/infiniband/hw/qib/qib_verbs.c
@@ -40,6 +40,7 @@
 #include <linux/rculist.h>
 #include <linux/mm.h>
 #include <linux/random.h>
+#include <linux/vmalloc.h>
 
 #include "qib.h"
 #include "qib_common.h"
@@ -2086,10 +2087,16 @@ int qib_register_ib_device(struct qib_de
 	 * the LKEY).  The remaining bits act as a generation number or tag.
 	 */
 	spin_lock_init(&dev->lk_table.lock);
+	/* insure generation is at least 4 bits see keys.c */
+	if (ib_qib_lkey_table_size > MAX_LKEY_TABLE_BITS) {
+		qib_dev_warn(dd, "lkey bits %u too large, reduced to %u\n",
+			ib_qib_lkey_table_size, MAX_LKEY_TABLE_BITS);
+		ib_qib_lkey_table_size = MAX_LKEY_TABLE_BITS;
+	}
 	dev->lk_table.max = 1 << ib_qib_lkey_table_size;
 	lk_tab_size = dev->lk_table.max * sizeof(*dev->lk_table.table);
 	dev->lk_table.table = (struct qib_mregion __rcu **)
-		__get_free_pages(GFP_KERNEL, get_order(lk_tab_size));
+		vmalloc(lk_tab_size);
 	if (dev->lk_table.table == NULL) {
 		ret = -ENOMEM;
 		goto err_lk;
@@ -2262,7 +2269,7 @@ err_tx:
 					sizeof(struct qib_pio_header),
 				  dev->pio_hdrs, dev->pio_hdrs_phys);
 err_hdrs:
-	free_pages((unsigned long) dev->lk_table.table, get_order(lk_tab_size));
+	vfree(dev->lk_table.table);
 err_lk:
 	kfree(dev->qp_table);
 err_qpt:
@@ -2316,8 +2323,7 @@ void qib_unregister_ib_device(struct qib
 					sizeof(struct qib_pio_header),
 				  dev->pio_hdrs, dev->pio_hdrs_phys);
 	lk_tab_size = dev->lk_table.max * sizeof(*dev->lk_table.table);
-	free_pages((unsigned long) dev->lk_table.table,
-		   get_order(lk_tab_size));
+	vfree(dev->lk_table.table);
 	kfree(dev->qp_table);
 }
 
--- a/drivers/infiniband/hw/qib/qib_verbs.h
+++ b/drivers/infiniband/hw/qib/qib_verbs.h
@@ -647,6 +647,8 @@ struct qib_qpn_table {
 	struct qpn_map map[QPNMAP_ENTRIES];
 };
 
+#define MAX_LKEY_TABLE_BITS 23
+
 struct qib_lkey_table {
 	spinlock_t lock; /* protect changes in this struct */
 	u32 next;               /* next unused index (speeds search) */

[PATCH 3.14 36/84] IB/uverbs: reject invalid or unknown opcodes

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <hch@lst.de>

commit b632ffa7cee439ba5dce3b3bc4a5cbe2b3e20133 upstream.

We have many WR opcodes that are only supported in kernel space
and/or require optional information to be copied into the WR
structure.  Reject all those not explicitly handled so that we
can't pass invalid information to drivers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/core/uverbs_cmd.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -2111,6 +2111,12 @@ ssize_t ib_uverbs_post_send(struct ib_uv
 		next->send_flags = user_wr->send_flags;
 
 		if (is_ud) {
+			if (next->opcode != IB_WR_SEND &&
+			    next->opcode != IB_WR_SEND_WITH_IMM) {
+				ret = -EINVAL;
+				goto out_put;
+			}
+
 			next->wr.ud.ah = idr_read_ah(user_wr->wr.ud.ah,
 						     file->ucontext);
 			if (!next->wr.ud.ah) {
@@ -2150,9 +2156,11 @@ ssize_t ib_uverbs_post_send(struct ib_uv
 					user_wr->wr.atomic.compare_add;
 				next->wr.atomic.swap = user_wr->wr.atomic.swap;
 				next->wr.atomic.rkey = user_wr->wr.atomic.rkey;
+			case IB_WR_SEND:
 				break;
 			default:
-				break;
+				ret = -EINVAL;
+				goto out_put;
 			}
 		}
 

[PATCH 3.14 37/84] IB/uverbs: Fix race between ib_uverbs_open and remove_one

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yishai Hadas <yishaih@mellanox.com>

commit 35d4a0b63dc0c6d1177d4f532a9deae958f0662c upstream.

Fixes: 2a72f212263701b927559f6850446421d5906c41 ("IB/uverbs: Remove dev_table")

Before this commit there was a device look-up table that was protected
by a spin_lock used by ib_uverbs_open and by ib_uverbs_remove_one. When
it was dropped and container_of was used instead, it enabled the race
with remove_one as dev might be freed just after:
dev = container_of(inode->i_cdev, struct ib_uverbs_device, cdev) but
before the kref_get.

In addition, this buggy patch added some dead code as
container_of(x,y,z) can never be NULL and so dev can never be NULL.
As a result the comment above ib_uverbs_open saying "the open method
will either immediately run -ENXIO" is wrong as it can never happen.

The solution follows Jason Gunthorpe suggestion from below URL:
https://www.mail-archive.com/linux-rdma@vger.kernel.org/msg25692.html

cdev will hold a kref on the parent (the containing structure,
ib_uverbs_device) and only when that kref is released it is
guaranteed that open will never be called again.

In addition, fixes the active count scheme to use an atomic
not a kref to prevent WARN_ON as pointed by above comment
from Jason.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/core/uverbs.h      |    3 +-
 drivers/infiniband/core/uverbs_main.c |   43 +++++++++++++++++++++++-----------
 2 files changed, 32 insertions(+), 14 deletions(-)

--- a/drivers/infiniband/core/uverbs.h
+++ b/drivers/infiniband/core/uverbs.h
@@ -85,7 +85,7 @@
  */
 
 struct ib_uverbs_device {
-	struct kref				ref;
+	atomic_t				refcount;
 	int					num_comp_vectors;
 	struct completion			comp;
 	struct device			       *dev;
@@ -94,6 +94,7 @@ struct ib_uverbs_device {
 	struct cdev			        cdev;
 	struct rb_root				xrcd_tree;
 	struct mutex				xrcd_tree_mutex;
+	struct kobject				kobj;
 };
 
 struct ib_uverbs_event_file {
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -127,14 +127,18 @@ static int (*uverbs_ex_cmd_table[])(stru
 static void ib_uverbs_add_one(struct ib_device *device);
 static void ib_uverbs_remove_one(struct ib_device *device);
 
-static void ib_uverbs_release_dev(struct kref *ref)
+static void ib_uverbs_release_dev(struct kobject *kobj)
 {
 	struct ib_uverbs_device *dev =
-		container_of(ref, struct ib_uverbs_device, ref);
+		container_of(kobj, struct ib_uverbs_device, kobj);
 
-	complete(&dev->comp);
+	kfree(dev);
 }
 
+static struct kobj_type ib_uverbs_dev_ktype = {
+	.release = ib_uverbs_release_dev,
+};
+
 static void ib_uverbs_release_event_file(struct kref *ref)
 {
 	struct ib_uverbs_event_file *file =
@@ -298,13 +302,19 @@ static int ib_uverbs_cleanup_ucontext(st
 	return context->device->dealloc_ucontext(context);
 }
 
+static void ib_uverbs_comp_dev(struct ib_uverbs_device *dev)
+{
+	complete(&dev->comp);
+}
+
 static void ib_uverbs_release_file(struct kref *ref)
 {
 	struct ib_uverbs_file *file =
 		container_of(ref, struct ib_uverbs_file, ref);
 
 	module_put(file->device->ib_dev->owner);
-	kref_put(&file->device->ref, ib_uverbs_release_dev);
+	if (atomic_dec_and_test(&file->device->refcount))
+		ib_uverbs_comp_dev(file->device);
 
 	kfree(file);
 }
@@ -734,9 +744,7 @@ static int ib_uverbs_open(struct inode *
 	int ret;
 
 	dev = container_of(inode->i_cdev, struct ib_uverbs_device, cdev);
-	if (dev)
-		kref_get(&dev->ref);
-	else
+	if (!atomic_inc_not_zero(&dev->refcount))
 		return -ENXIO;
 
 	if (!try_module_get(dev->ib_dev->owner)) {
@@ -757,6 +765,7 @@ static int ib_uverbs_open(struct inode *
 	mutex_init(&file->mutex);
 
 	filp->private_data = file;
+	kobject_get(&dev->kobj);
 
 	return nonseekable_open(inode, filp);
 
@@ -764,13 +773,16 @@ err_module:
 	module_put(dev->ib_dev->owner);
 
 err:
-	kref_put(&dev->ref, ib_uverbs_release_dev);
+	if (atomic_dec_and_test(&dev->refcount))
+		ib_uverbs_comp_dev(dev);
+
 	return ret;
 }
 
 static int ib_uverbs_close(struct inode *inode, struct file *filp)
 {
 	struct ib_uverbs_file *file = filp->private_data;
+	struct ib_uverbs_device *dev = file->device;
 
 	ib_uverbs_cleanup_ucontext(file, file->ucontext);
 
@@ -778,6 +790,7 @@ static int ib_uverbs_close(struct inode
 		kref_put(&file->async_file->ref, ib_uverbs_release_event_file);
 
 	kref_put(&file->ref, ib_uverbs_release_file);
+	kobject_put(&dev->kobj);
 
 	return 0;
 }
@@ -873,10 +886,11 @@ static void ib_uverbs_add_one(struct ib_
 	if (!uverbs_dev)
 		return;
 
-	kref_init(&uverbs_dev->ref);
+	atomic_set(&uverbs_dev->refcount, 1);
 	init_completion(&uverbs_dev->comp);
 	uverbs_dev->xrcd_tree = RB_ROOT;
 	mutex_init(&uverbs_dev->xrcd_tree_mutex);
+	kobject_init(&uverbs_dev->kobj, &ib_uverbs_dev_ktype);
 
 	spin_lock(&map_lock);
 	devnum = find_first_zero_bit(dev_map, IB_UVERBS_MAX_DEVICES);
@@ -903,6 +917,7 @@ static void ib_uverbs_add_one(struct ib_
 	cdev_init(&uverbs_dev->cdev, NULL);
 	uverbs_dev->cdev.owner = THIS_MODULE;
 	uverbs_dev->cdev.ops = device->mmap ? &uverbs_mmap_fops : &uverbs_fops;
+	uverbs_dev->cdev.kobj.parent = &uverbs_dev->kobj;
 	kobject_set_name(&uverbs_dev->cdev.kobj, "uverbs%d", uverbs_dev->devnum);
 	if (cdev_add(&uverbs_dev->cdev, base, 1))
 		goto err_cdev;
@@ -933,9 +948,10 @@ err_cdev:
 		clear_bit(devnum, overflow_map);
 
 err:
-	kref_put(&uverbs_dev->ref, ib_uverbs_release_dev);
+	if (atomic_dec_and_test(&uverbs_dev->refcount))
+		ib_uverbs_comp_dev(uverbs_dev);
 	wait_for_completion(&uverbs_dev->comp);
-	kfree(uverbs_dev);
+	kobject_put(&uverbs_dev->kobj);
 	return;
 }
 
@@ -955,9 +971,10 @@ static void ib_uverbs_remove_one(struct
 	else
 		clear_bit(uverbs_dev->devnum - IB_UVERBS_MAX_DEVICES, overflow_map);
 
-	kref_put(&uverbs_dev->ref, ib_uverbs_release_dev);
+	if (atomic_dec_and_test(&uverbs_dev->refcount))
+		ib_uverbs_comp_dev(uverbs_dev);
 	wait_for_completion(&uverbs_dev->comp);
-	kfree(uverbs_dev);
+	kobject_put(&uverbs_dev->kobj);
 }
 
 static char *uverbs_devnode(struct device *dev, umode_t *mode)

[PATCH 3.14 38/84] IB/mlx4: Forbid using sysfs to change RoCE pkeys

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

commit 2b135db3e81301d0452e6aa107349abe67b097d6 upstream.

The pkey mapping for RoCE must remain the default mapping:
VFs:
  virtual index 0 = mapped to real index 0 (0xFFFF)
  All others indices: mapped to a real pkey index containing an
                      invalid pkey.
PF:
  virtual index i = real index i.

Don't allow users to change these mappings using files found in
sysfs.

Fixes: c1e7e466120b ('IB/mlx4: Add iov directory in sysfs under the ib device')
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx4/sysfs.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/hw/mlx4/sysfs.c
+++ b/drivers/infiniband/hw/mlx4/sysfs.c
@@ -563,6 +563,8 @@ static int add_port(struct mlx4_ib_dev *
 	struct mlx4_port *p;
 	int i;
 	int ret;
+	int is_eth = rdma_port_get_link_layer(&dev->ib_dev, port_num) ==
+			IB_LINK_LAYER_ETHERNET;
 
 	p = kzalloc(sizeof *p, GFP_KERNEL);
 	if (!p)
@@ -580,7 +582,8 @@ static int add_port(struct mlx4_ib_dev *
 
 	p->pkey_group.name  = "pkey_idx";
 	p->pkey_group.attrs =
-		alloc_group_attrs(show_port_pkey, store_port_pkey,
+		alloc_group_attrs(show_port_pkey,
+				  is_eth ? NULL : store_port_pkey,
 				  dev->dev->caps.pkey_table_len[port_num]);
 	if (!p->pkey_group.attrs) {
 		ret = -ENOMEM;

[PATCH 3.14 39/84] IB/mlx4: Use correct SL on AH query under RoCE

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Noa Osherovich <noaos@mellanox.com>

commit 5e99b139f1b68acd65e36515ca347b03856dfb5a upstream.

The mlx4 IB driver implementation for ib_query_ah used a wrong offset
(28 instead of 29) when link type is Ethernet. Fixed to use the correct one.

Fixes: fa417f7b520e ('IB/mlx4: Add support for IBoE')
Signed-off-by: Shani Michaeli <shanim@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx4/ah.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/hw/mlx4/ah.c
+++ b/drivers/infiniband/hw/mlx4/ah.c
@@ -147,9 +147,13 @@ int mlx4_ib_query_ah(struct ib_ah *ibah,
 	enum rdma_link_layer ll;
 
 	memset(ah_attr, 0, sizeof *ah_attr);
-	ah_attr->sl = be32_to_cpu(ah->av.ib.sl_tclass_flowlabel) >> 28;
 	ah_attr->port_num = be32_to_cpu(ah->av.ib.port_pd) >> 24;
 	ll = rdma_port_get_link_layer(ibah->device, ah_attr->port_num);
+	if (ll == IB_LINK_LAYER_ETHERNET)
+		ah_attr->sl = be32_to_cpu(ah->av.eth.sl_tclass_flowlabel) >> 29;
+	else
+		ah_attr->sl = be32_to_cpu(ah->av.ib.sl_tclass_flowlabel) >> 28;
+
 	ah_attr->dlid = ll == IB_LINK_LAYER_INFINIBAND ? be16_to_cpu(ah->av.ib.dlid) : 0;
 	if (ah->av.ib.stat_rate)
 		ah_attr->static_rate = ah->av.ib.stat_rate - MLX4_STAT_RATE_OFFSET;

[PATCH 3.14 40/84] stmmac: fix check for phydev being open

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>

commit dfc50fcaad574e5c8c85cbc83eca1426b2413fa4 upstream.

Current check of phydev with IS_ERR(phydev) may make not much sense
because of_phy_connect() returns NULL on failure instead of error value.

Still for checking result of phy_connect() IS_ERR() makes perfect sense.

So let's use combined check IS_ERR_OR_NULL() that covers both cases.

Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: linux-kernel@vger.kernel.org
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -810,8 +810,11 @@ static int stmmac_init_phy(struct net_de
 
 	phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, interface);
 
-	if (IS_ERR(phydev)) {
+	if (IS_ERR_OR_NULL(phydev)) {
 		pr_err("%s: Could not attach to PHY\n", dev->name);
+		if (!phydev)
+			return -ENODEV;
+
 		return PTR_ERR(phydev);
 	}
 

Re: [PATCH 3.14 40/84] stmmac: fix check for phydev being open

[Sergei Shtylyov]

Hello.

On 9/29/2015 6:18 PM, Greg Kroah-Hartman wrote:

> 3.14-stable review patch.  If anyone has any objections, please let me know.

    NAK on the same grounds as the 3.10 patch.

> ------------------
>
> From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
>
> commit dfc50fcaad574e5c8c85cbc83eca1426b2413fa4 upstream.
>
> Current check of phydev with IS_ERR(phydev) may make not much sense
> because of_phy_connect() returns NULL on failure instead of error value.
>
> Still for checking result of phy_connect() IS_ERR() makes perfect sense.
>
> So let's use combined check IS_ERR_OR_NULL() that covers both cases.
>
> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
> Cc: linux-kernel@vger.kernel.org
> Cc: David Miller <davem@davemloft.net>
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> ---
>   drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |    5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
>
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -810,8 +810,11 @@ static int stmmac_init_phy(struct net_de
>
>   	phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, interface);

    If you really read the change log and compare it with the code, it's 
obviousl that the patch is not needed.

>
> -	if (IS_ERR(phydev)) {
> +	if (IS_ERR_OR_NULL(phydev)) {
>   		pr_err("%s: Could not attach to PHY\n", dev->name);
> +		if (!phydev)
> +			return -ENODEV;
> +
>   		return PTR_ERR(phydev);
>   	}
>

MBR, Sergei

Re: [PATCH 3.14 40/84] stmmac: fix check for phydev being open

[Greg Kroah-Hartman]

On Wed, Sep 30, 2015 at 02:22:24PM +0300, Sergei Shtylyov wrote:
> Hello.
> 
> On 9/29/2015 6:18 PM, Greg Kroah-Hartman wrote:
> 
> >3.14-stable review patch.  If anyone has any objections, please let me know.
> 
>    NAK on the same grounds as the 3.10 patch.

Both now removed from the tree, thanks.

greg k-h

[PATCH 3.14 41/84] stmmac: troubleshoot unexpected bits in des0 & des1

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>

commit f1590670ce069eefeb93916391a67643e6ad1630 upstream.

Current implementation of descriptor init procedure only takes
care about setting/clearing ownership flag in "des0"/"des1"
fields while it is perfectly possible to get unexpected bits
set because of the following factors:

 [1] On driver probe underlying memory allocated with
     dma_alloc_coherent() might not be zeroed and so
     it will be filled with garbage.

 [2] During driver operation some bits could be set by SD/MMC
     controller (for example error flags etc).

And unexpected and/or randomly set flags in "des0"/"des1"
fields may lead to unpredictable behavior of GMAC DMA block.

This change addresses both items above with:

 [1] Use of dma_zalloc_coherent() instead of simple
     dma_alloc_coherent() to make sure allocated memory is
     zeroed. That shouldn't affect performance because
     this allocation only happens once on driver probe.

 [2] Do explicit zeroing of both "des0" and "des1" fields
     of all buffer descriptors during initialization of
     DMA transfer.

And while at it fixed identation of dma_free_coherent()
counterpart as well.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: arc-linux-dev@synopsys.com
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/stmicro/stmmac/descs.h       |    2 +
 drivers/net/ethernet/stmicro/stmmac/enh_desc.c    |    3 +
 drivers/net/ethernet/stmicro/stmmac/norm_desc.c   |    3 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |   44 +++++++++++-----------
 4 files changed, 28 insertions(+), 24 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/descs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/descs.h
@@ -158,6 +158,8 @@ struct dma_desc {
 			u32 buffer2_size:13;
 			u32 reserved4:3;
 		} etx;		/* -- enhanced -- */
+
+		u64 all_flags;
 	} des01;
 	unsigned int des2;
 	unsigned int des3;
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -240,6 +240,7 @@ static int enh_desc_get_rx_status(void *
 static void enh_desc_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
 				  int mode, int end)
 {
+	p->des01.all_flags = 0;
 	p->des01.erx.own = 1;
 	p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1;
 
@@ -254,7 +255,7 @@ static void enh_desc_init_rx_desc(struct
 
 static void enh_desc_init_tx_desc(struct dma_desc *p, int mode, int end)
 {
-	p->des01.etx.own = 0;
+	p->des01.all_flags = 0;
 	if (mode == STMMAC_CHAIN_MODE)
 		ehn_desc_tx_set_on_chain(p, end);
 	else
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -123,6 +123,7 @@ static int ndesc_get_rx_status(void *dat
 static void ndesc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, int mode,
 			       int end)
 {
+	p->des01.all_flags = 0;
 	p->des01.rx.own = 1;
 	p->des01.rx.buffer1_size = BUF_SIZE_2KiB - 1;
 
@@ -137,7 +138,7 @@ static void ndesc_init_rx_desc(struct dm
 
 static void ndesc_init_tx_desc(struct dma_desc *p, int mode, int end)
 {
-	p->des01.tx.own = 0;
+	p->des01.all_flags = 0;
 	if (mode == STMMAC_CHAIN_MODE)
 		ndesc_tx_set_on_chain(p, end);
 	else
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1145,41 +1145,41 @@ static int alloc_dma_desc_resources(stru
 		goto err_tx_skbuff;
 
 	if (priv->extend_desc) {
-		priv->dma_erx = dma_alloc_coherent(priv->device, rxsize *
-						   sizeof(struct
-							  dma_extended_desc),
-						   &priv->dma_rx_phy,
-						   GFP_KERNEL);
+		priv->dma_erx = dma_zalloc_coherent(priv->device, rxsize *
+						    sizeof(struct
+							   dma_extended_desc),
+						    &priv->dma_rx_phy,
+						    GFP_KERNEL);
 		if (!priv->dma_erx)
 			goto err_dma;
 
-		priv->dma_etx = dma_alloc_coherent(priv->device, txsize *
-						   sizeof(struct
-							  dma_extended_desc),
-						   &priv->dma_tx_phy,
-						   GFP_KERNEL);
+		priv->dma_etx = dma_zalloc_coherent(priv->device, txsize *
+						    sizeof(struct
+							   dma_extended_desc),
+						    &priv->dma_tx_phy,
+						    GFP_KERNEL);
 		if (!priv->dma_etx) {
 			dma_free_coherent(priv->device, priv->dma_rx_size *
-					sizeof(struct dma_extended_desc),
-					priv->dma_erx, priv->dma_rx_phy);
+					  sizeof(struct dma_extended_desc),
+					  priv->dma_erx, priv->dma_rx_phy);
 			goto err_dma;
 		}
 	} else {
-		priv->dma_rx = dma_alloc_coherent(priv->device, rxsize *
-						  sizeof(struct dma_desc),
-						  &priv->dma_rx_phy,
-						  GFP_KERNEL);
+		priv->dma_rx = dma_zalloc_coherent(priv->device, rxsize *
+						   sizeof(struct dma_desc),
+						   &priv->dma_rx_phy,
+						   GFP_KERNEL);
 		if (!priv->dma_rx)
 			goto err_dma;
 
-		priv->dma_tx = dma_alloc_coherent(priv->device, txsize *
-						  sizeof(struct dma_desc),
-						  &priv->dma_tx_phy,
-						  GFP_KERNEL);
+		priv->dma_tx = dma_zalloc_coherent(priv->device, txsize *
+						   sizeof(struct dma_desc),
+						   &priv->dma_tx_phy,
+						   GFP_KERNEL);
 		if (!priv->dma_tx) {
 			dma_free_coherent(priv->device, priv->dma_rx_size *
-					sizeof(struct dma_desc),
-					priv->dma_rx, priv->dma_rx_phy);
+					  sizeof(struct dma_desc),
+					  priv->dma_rx, priv->dma_rx_phy);
 			goto err_dma;
 		}
 	}

[PATCH 3.14 42/84] hfs,hfsplus: cache pages correctly between bnode_create and bnode_free

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hin-Tak Leung <htl10@users.sourceforge.net>

commit 7cb74be6fd827e314f81df3c5889b87e4c87c569 upstream.

Pages looked up by __hfs_bnode_create() (called by hfs_bnode_create() and
hfs_bnode_find() for finding or creating pages corresponding to an inode)
are immediately kmap()'ed and used (both read and write) and kunmap()'ed,
and should not be page_cache_release()'ed until hfs_bnode_free().

This patch fixes a problem I first saw in July 2012: merely running "du"
on a large hfsplus-mounted directory a few times on a reasonably loaded
system would get the hfsplus driver all confused and complaining about
B-tree inconsistencies, and generates a "BUG: Bad page state".  Most
recently, I can generate this problem on up-to-date Fedora 22 with shipped
kernel 4.0.5, by running "du /" (="/" + "/home" + "/mnt" + other smaller
mounts) and "du /mnt" simultaneously on two windows, where /mnt is a
lightly-used QEMU VM image of the full Mac OS X 10.9:

$ df -i / /home /mnt
Filesystem                  Inodes   IUsed      IFree IUse% Mounted on
/dev/mapper/fedora-root    3276800  551665    2725135   17% /
/dev/mapper/fedora-home   52879360  716221   52163139    2% /home
/dev/nbd0p2             4294967295 1387818 4293579477    1% /mnt

After applying the patch, I was able to run "du /" (60+ times) and "du
/mnt" (150+ times) continuously and simultaneously for 6+ hours.

There are many reports of the hfsplus driver getting confused under load
and generating "BUG: Bad page state" or other similar issues over the
years.  [1]

The unpatched code [2] has always been wrong since it entered the kernel
tree.  The only reason why it gets away with it is that the
kmap/memcpy/kunmap follow very quickly after the page_cache_release() so
the kernel has not had a chance to reuse the memory for something else,
most of the time.

The current RW driver appears to have followed the design and development
of the earlier read-only hfsplus driver [3], where-by version 0.1 (Dec
2001) had a B-tree node-centric approach to
read_cache_page()/page_cache_release() per bnode_get()/bnode_put(),
migrating towards version 0.2 (June 2002) of caching and releasing pages
per inode extents.  When the current RW code first entered the kernel [2]
in 2005, there was an REF_PAGES conditional (and "//" commented out code)
to switch between B-node centric paging to inode-centric paging.  There
was a mistake with the direction of one of the REF_PAGES conditionals in
__hfs_bnode_create().  In a subsequent "remove debug code" commit [4], the
read_cache_page()/page_cache_release() per bnode_get()/bnode_put() were
removed, but a page_cache_release() was mistakenly left in (propagating
the "REF_PAGES <-> !REF_PAGE" mistake), and the commented-out
page_cache_release() in bnode_release() (which should be spanned by
!REF_PAGES) was never enabled.

References:
[1]:
Michael Fox, Apr 2013
http://www.spinics.net/lists/linux-fsdevel/msg63807.html
("hfsplus volume suddenly inaccessable after 'hfs: recoff %d too large'")

Sasha Levin, Feb 2015
http://lkml.org/lkml/2015/2/20/85 ("use after free")

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/740814
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1027887
https://bugzilla.kernel.org/show_bug.cgi?id=42342
https://bugzilla.kernel.org/show_bug.cgi?id=63841
https://bugzilla.kernel.org/show_bug.cgi?id=78761

[2]:
http://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/\
fs/hfs/bnode.c?id=d1081202f1d0ee35ab0beb490da4b65d4bc763db
commit d1081202f1d0ee35ab0beb490da4b65d4bc763db
Author: Andrew Morton <akpm@osdl.org>
Date:   Wed Feb 25 16:17:36 2004 -0800

    [PATCH] HFS rewrite

http://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/\
fs/hfsplus/bnode.c?id=91556682e0bf004d98a529bf829d339abb98bbbd

commit 91556682e0bf004d98a529bf829d339abb98bbbd
Author: Andrew Morton <akpm@osdl.org>
Date:   Wed Feb 25 16:17:48 2004 -0800

    [PATCH] HFS+ support

[3]:
http://sourceforge.net/projects/linux-hfsplus/

http://sourceforge.net/projects/linux-hfsplus/files/Linux%202.4.x%20patch/hfsplus%200.1/
http://sourceforge.net/projects/linux-hfsplus/files/Linux%202.4.x%20patch/hfsplus%200.2/

http://linux-hfsplus.cvs.sourceforge.net/viewvc/linux-hfsplus/linux/\
fs/hfsplus/bnode.c?r1=1.4&r2=1.5

Date:   Thu Jun 6 09:45:14 2002 +0000
Use buffer cache instead of page cache in bnode.c. Cache inode extents.

[4]:
http://git.kernel.org/cgit/linux/kernel/git/\
stable/linux-stable.git/commit/?id=a5e3985fa014029eb6795664c704953720cc7f7d

commit a5e3985fa014029eb6795664c704953720cc7f7d
Author: Roman Zippel <zippel@linux-m68k.org>
Date:   Tue Sep 6 15:18:47 2005 -0700

[PATCH] hfs: remove debug code

Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Sougata Santra <sougata@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/hfs/bnode.c     |    9 ++++-----
 fs/hfsplus/bnode.c |    3 ---
 2 files changed, 4 insertions(+), 8 deletions(-)

--- a/fs/hfs/bnode.c
+++ b/fs/hfs/bnode.c
@@ -288,7 +288,6 @@ static struct hfs_bnode *__hfs_bnode_cre
 			page_cache_release(page);
 			goto fail;
 		}
-		page_cache_release(page);
 		node->page[i] = page;
 	}
 
@@ -398,11 +397,11 @@ node_error:
 
 void hfs_bnode_free(struct hfs_bnode *node)
 {
-	//int i;
+	int i;
 
-	//for (i = 0; i < node->tree->pages_per_bnode; i++)
-	//	if (node->page[i])
-	//		page_cache_release(node->page[i]);
+	for (i = 0; i < node->tree->pages_per_bnode; i++)
+		if (node->page[i])
+			page_cache_release(node->page[i]);
 	kfree(node);
 }
 
--- a/fs/hfsplus/bnode.c
+++ b/fs/hfsplus/bnode.c
@@ -456,7 +456,6 @@ static struct hfs_bnode *__hfs_bnode_cre
 			page_cache_release(page);
 			goto fail;
 		}
-		page_cache_release(page);
 		node->page[i] = page;
 	}
 
@@ -568,13 +567,11 @@ node_error:
 
 void hfs_bnode_free(struct hfs_bnode *node)
 {
-#if 0
 	int i;
 
 	for (i = 0; i < node->tree->pages_per_bnode; i++)
 		if (node->page[i])
 			page_cache_release(node->page[i]);
-#endif
 	kfree(node);
 }
 

[PATCH 3.14 43/84] ipv6: Make MLD packets to only be processed locally

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Angga <Hermin.Anggawijaya@alliedtelesis.co.nz>

[ Upstream commit 4c938d22c88a9ddccc8c55a85e0430e9c62b1ac5 ]

Before commit daad151263cf ("ipv6: Make ipv6_is_mld() inline and use it
from ip6_mc_input().") MLD packets were only processed locally. After the
change, a copy of MLD packet goes through ip6_mr_input, causing
MRT6MSG_NOCACHE message to be generated to user space.

Make MLD packet only processed locally.

Fixes: daad151263cf ("ipv6: Make ipv6_is_mld() inline and use it from ip6_mc_input().")
Signed-off-by: Hermin Anggawijaya <hermin.anggawijaya@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_input.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -329,10 +329,10 @@ int ip6_mc_input(struct sk_buff *skb)
 				if (offset < 0)
 					goto out;
 
-				if (!ipv6_is_mld(skb, nexthdr, offset))
-					goto out;
+				if (ipv6_is_mld(skb, nexthdr, offset))
+					deliver = true;
 
-				deliver = true;
+				goto out;
 			}
 			/* unknown RA - process it normally */
 		}

[PATCH 3.14 44/84] net: graceful exit from netif_alloc_netdev_queues()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit d339727c2b1a10f25e6636670ab6e1841170e328 ]

User space can crash kernel with

ip link add ifb10 numtxqueues 100000 type ifb

We must replace a BUG_ON() by proper test and return -EINVAL for
crazy values.

Fixes: 60877a32bce00 ("net: allow large number of tx queues")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5951,7 +5951,8 @@ static int netif_alloc_netdev_queues(str
 	struct netdev_queue *tx;
 	size_t sz = count * sizeof(*tx);
 
-	BUG_ON(count < 1 || count > 0xffff);
+	if (count < 1 || count > 0xffff)
+		return -EINVAL;
 
 	tx = kzalloc(sz, GFP_KERNEL | __GFP_NOWARN | __GFP_REPEAT);
 	if (!tx) {

[PATCH 3.14 45/84] rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <daniel@iogearbox.net>

[ Upstream commit 4f7d2cdfdde71ffe962399b7020c674050329423 ]

Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make
SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes
anymore with respect to their policy, that is, ifla_vfinfo_policy[].

Before, they were part of ifla_policy[], but they have been nested since
placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO,
which is another nested attribute for the actual VF attributes such as
IFLA_VF_MAC, IFLA_VF_VLAN, etc.

Despite the policy being split out from ifla_policy[] in this commit,
it's never applied anywhere. nla_for_each_nested() only does basic nla_ok()
testing for struct nlattr, but it doesn't know about the data context and
their requirements.

Fix, on top of Jason's initial work, does 1) parsing of the attributes
with the right policy, and 2) using the resulting parsed attribute table
from 1) instead of the nla_for_each_nested() loop (just like we used to
do when still part of ifla_policy[]).

Reference: http://thread.gmane.org/gmane.linux.network/368913
Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric")
Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Cc: Greg Rose <gregory.v.rose@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Rony Efraim <ronye@mellanox.com>
Cc: Vlad Zolotarov <vladz@cloudius-systems.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/rtnetlink.c |  128 +++++++++++++++++++++++++--------------------------
 1 file changed, 65 insertions(+), 63 deletions(-)

--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1259,10 +1259,6 @@ static const struct nla_policy ifla_info
 	[IFLA_INFO_SLAVE_DATA]	= { .type = NLA_NESTED },
 };
 
-static const struct nla_policy ifla_vfinfo_policy[IFLA_VF_INFO_MAX+1] = {
-	[IFLA_VF_INFO]		= { .type = NLA_NESTED },
-};
-
 static const struct nla_policy ifla_vf_policy[IFLA_VF_MAX+1] = {
 	[IFLA_VF_MAC]		= { .len = sizeof(struct ifla_vf_mac) },
 	[IFLA_VF_VLAN]		= { .len = sizeof(struct ifla_vf_vlan) },
@@ -1336,67 +1332,66 @@ static int validate_linkmsg(struct net_d
 	return 0;
 }
 
-static int do_setvfinfo(struct net_device *dev, struct nlattr *attr)
+static int do_setvfinfo(struct net_device *dev, struct nlattr **tb)
 {
-	int rem, err = -EINVAL;
-	struct nlattr *vf;
 	const struct net_device_ops *ops = dev->netdev_ops;
+	int err = -EINVAL;
 
-	nla_for_each_nested(vf, attr, rem) {
-		switch (nla_type(vf)) {
-		case IFLA_VF_MAC: {
-			struct ifla_vf_mac *ivm;
-			ivm = nla_data(vf);
-			err = -EOPNOTSUPP;
-			if (ops->ndo_set_vf_mac)
-				err = ops->ndo_set_vf_mac(dev, ivm->vf,
-							  ivm->mac);
-			break;
-		}
-		case IFLA_VF_VLAN: {
-			struct ifla_vf_vlan *ivv;
-			ivv = nla_data(vf);
-			err = -EOPNOTSUPP;
-			if (ops->ndo_set_vf_vlan)
-				err = ops->ndo_set_vf_vlan(dev, ivv->vf,
-							   ivv->vlan,
-							   ivv->qos);
-			break;
-		}
-		case IFLA_VF_TX_RATE: {
-			struct ifla_vf_tx_rate *ivt;
-			ivt = nla_data(vf);
-			err = -EOPNOTSUPP;
-			if (ops->ndo_set_vf_tx_rate)
-				err = ops->ndo_set_vf_tx_rate(dev, ivt->vf,
-							      ivt->rate);
-			break;
-		}
-		case IFLA_VF_SPOOFCHK: {
-			struct ifla_vf_spoofchk *ivs;
-			ivs = nla_data(vf);
-			err = -EOPNOTSUPP;
-			if (ops->ndo_set_vf_spoofchk)
-				err = ops->ndo_set_vf_spoofchk(dev, ivs->vf,
-							       ivs->setting);
-			break;
-		}
-		case IFLA_VF_LINK_STATE: {
-			struct ifla_vf_link_state *ivl;
-			ivl = nla_data(vf);
-			err = -EOPNOTSUPP;
-			if (ops->ndo_set_vf_link_state)
-				err = ops->ndo_set_vf_link_state(dev, ivl->vf,
-								 ivl->link_state);
-			break;
-		}
-		default:
-			err = -EINVAL;
-			break;
-		}
-		if (err)
-			break;
+	if (tb[IFLA_VF_MAC]) {
+		struct ifla_vf_mac *ivm = nla_data(tb[IFLA_VF_MAC]);
+
+		err = -EOPNOTSUPP;
+		if (ops->ndo_set_vf_mac)
+			err = ops->ndo_set_vf_mac(dev, ivm->vf,
+						  ivm->mac);
+		if (err < 0)
+			return err;
+	}
+
+	if (tb[IFLA_VF_VLAN]) {
+		struct ifla_vf_vlan *ivv = nla_data(tb[IFLA_VF_VLAN]);
+
+		err = -EOPNOTSUPP;
+		if (ops->ndo_set_vf_vlan)
+			err = ops->ndo_set_vf_vlan(dev, ivv->vf, ivv->vlan,
+						   ivv->qos);
+		if (err < 0)
+			return err;
+	}
+
+	if (tb[IFLA_VF_TX_RATE]) {
+		struct ifla_vf_tx_rate *ivt = nla_data(tb[IFLA_VF_TX_RATE]);
+
+		err = -EOPNOTSUPP;
+		if (ops->ndo_set_vf_tx_rate)
+			err = ops->ndo_set_vf_tx_rate(dev, ivt->vf,
+						      ivt->rate);
+		if (err < 0)
+			return err;
+	}
+
+	if (tb[IFLA_VF_SPOOFCHK]) {
+		struct ifla_vf_spoofchk *ivs = nla_data(tb[IFLA_VF_SPOOFCHK]);
+
+		err = -EOPNOTSUPP;
+		if (ops->ndo_set_vf_spoofchk)
+			err = ops->ndo_set_vf_spoofchk(dev, ivs->vf,
+						       ivs->setting);
+		if (err < 0)
+			return err;
+	}
+
+	if (tb[IFLA_VF_LINK_STATE]) {
+		struct ifla_vf_link_state *ivl = nla_data(tb[IFLA_VF_LINK_STATE]);
+
+		err = -EOPNOTSUPP;
+		if (ops->ndo_set_vf_link_state)
+			err = ops->ndo_set_vf_link_state(dev, ivl->vf,
+							 ivl->link_state);
+		if (err < 0)
+			return err;
 	}
+
 	return err;
 }
 
@@ -1579,14 +1574,21 @@ static int do_setlink(const struct sk_bu
 	}
 
 	if (tb[IFLA_VFINFO_LIST]) {
+		struct nlattr *vfinfo[IFLA_VF_MAX + 1];
 		struct nlattr *attr;
 		int rem;
+
 		nla_for_each_nested(attr, tb[IFLA_VFINFO_LIST], rem) {
-			if (nla_type(attr) != IFLA_VF_INFO) {
+			if (nla_type(attr) != IFLA_VF_INFO ||
+			    nla_len(attr) < NLA_HDRLEN) {
 				err = -EINVAL;
 				goto errout;
 			}
-			err = do_setvfinfo(dev, attr);
+			err = nla_parse_nested(vfinfo, IFLA_VF_MAX, attr,
+					       ifla_vf_policy);
+			if (err < 0)
+				goto errout;
+			err = do_setvfinfo(dev, vfinfo);
 			if (err < 0)
 				goto errout;
 			modified = 1;

[PATCH 3.14 47/84] net/tipc: initialize security state for new connection socket

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Smalley <sds@tycho.nsa.gov>

[ Upstream commit fdd75ea8df370f206a8163786e7470c1277a5064 ]

Calling connect() with an AF_TIPC socket would trigger a series
of error messages from SELinux along the lines of:
SELinux: Invalid class 0
type=AVC msg=audit(1434126658.487:34500): avc:  denied  { <unprintable> }
  for pid=292 comm="kworker/u16:5" scontext=system_u:system_r:kernel_t:s0
  tcontext=system_u:object_r:unlabeled_t:s0 tclass=<unprintable>
  permissive=0

This was due to a failure to initialize the security state of the new
connection sock by the tipc code, leaving it with junk in the security
class field and an unlabeled secid.  Add a call to security_sk_clone()
to inherit the security state from the parent socket.

Reported-by: Tim Shearer <tim.shearer@overturenetworks.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tipc/socket.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -1681,6 +1681,7 @@ static int accept(struct socket *sock, s
 	res = tipc_sk_create(sock_net(sock->sk), new_sock, 0, 1);
 	if (res)
 		goto exit;
+	security_sk_clone(sock->sk, new_sock->sk);
 
 	new_sk = new_sock->sk;
 	new_tsock = tipc_sk(new_sk);

[PATCH 3.14 48/84] bridge: mdb: zero out the local br_ip variable before use

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Aleksandrov <razor@blackwall.org>

[ Upstream commit f1158b74e54f2e2462ba5e2f45a118246d9d5b43 ]

Since commit b0e9a30dd669 ("bridge: Add vlan id to multicast groups")
there's a check in br_ip_equal() for a matching vlan id, but the mdb
functions were not modified to use (or at least zero it) so when an
entry was added it would have a garbage vlan id (from the local br_ip
variable in __br_mdb_add/del) and this would prevent it from being
matched and also deleted. So zero out the whole local ip var to protect
ourselves from future changes and also to fix the current bug, since
there's no vlan id support in the mdb uapi - use always vlan id 0.
Example before patch:
root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb
dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent
RTNETLINK answers: Invalid argument

After patch:
root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb
dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb

Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Fixes: b0e9a30dd669 ("bridge: Add vlan id to multicast groups")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_mdb.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/bridge/br_mdb.c
+++ b/net/bridge/br_mdb.c
@@ -370,6 +370,7 @@ static int __br_mdb_add(struct net *net,
 	if (!p || p->br != br || p->state == BR_STATE_DISABLED)
 		return -EINVAL;
 
+	memset(&ip, 0, sizeof(ip));
 	ip.proto = entry->addr.proto;
 	if (ip.proto == htons(ETH_P_IP))
 		ip.u.ip4 = entry->addr.u.ip4;
@@ -416,6 +417,7 @@ static int __br_mdb_del(struct net_bridg
 	if (!netif_running(br->dev) || br->multicast_disabled)
 		return -EINVAL;
 
+	memset(&ip, 0, sizeof(ip));
 	ip.proto = entry->addr.proto;
 	if (ip.proto == htons(ETH_P_IP)) {
 		if (timer_pending(&br->ip4_querier.timer))

[PATCH 3.14 49/84] net: pktgen: fix race between pktgen_thread_worker() and kthread_stop()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oleg Nesterov <oleg@redhat.com>

[ Upstream commit fecdf8be2d91e04b0a9a4f79ff06499a36f5d14f ]

pktgen_thread_worker() is obviously racy, kthread_stop() can come
between the kthread_should_stop() check and set_current_state().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Reported-by: Marcelo Leitner <mleitner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/pktgen.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -3464,8 +3464,10 @@ static int pktgen_thread_worker(void *ar
 	pktgen_rem_thread(t);
 
 	/* Wait for kthread_stop */
-	while (!kthread_should_stop()) {
+	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
+		if (kthread_should_stop())
+			break;
 		schedule();
 	}
 	__set_current_state(TASK_RUNNING);

[PATCH 3.14 50/84] net: do not process device backlog during unregistration

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Anastasov <ja@ssi.bg>

[ Upstream commit e9e4dd3267d0c5234c5c0f47440456b10875dec9 ]

commit 381c759d9916 ("ipv4: Avoid crashing in ip_error")
fixes a problem where processed packet comes from device
with destroyed inetdev (dev->ip_ptr). This is not expected
because inetdev_destroy is called in NETDEV_UNREGISTER
phase and packets should not be processed after
dev_close_many() and synchronize_net(). Above fix is still
required because inetdev_destroy can be called for other
reasons. But it shows the real problem: backlog can keep
packets for long time and they do not hold reference to
device. Such packets are then delivered to upper levels
at the same time when device is unregistered.
Calling flush_backlog after NETDEV_UNREGISTER_FINAL still
accounts all packets from backlog but before that some packets
continue to be delivered to upper levels long after the
synchronize_net call which is supposed to wait the last
ones. Also, as Eric pointed out, processed packets, mostly
from other devices, can continue to add new packets to backlog.

Fix the problem by moving flush_backlog early, after the
device driver is stopped and before the synchronize_net() call.
Then use netif_running check to make sure we do not add more
packets to backlog. We have to do it in enqueue_to_backlog
context when the local IRQ is disabled. As result, after the
flush_backlog and synchronize_net sequence all packets
should be accounted.

Thanks to Eric W. Biederman for the test script and his
valuable feedback!

Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue")
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3214,6 +3214,8 @@ static int enqueue_to_backlog(struct sk_
 	local_irq_save(flags);
 
 	rps_lock(sd);
+	if (!netif_running(skb->dev))
+		goto drop;
 	qlen = skb_queue_len(&sd->input_pkt_queue);
 	if (qlen <= netdev_max_backlog && !skb_flow_limit(skb, qlen)) {
 		if (skb_queue_len(&sd->input_pkt_queue)) {
@@ -3235,6 +3237,7 @@ enqueue:
 		goto enqueue;
 	}
 
+drop:
 	sd->dropped++;
 	rps_unlock(sd);
 
@@ -5694,6 +5697,7 @@ static void rollback_registered_many(str
 		unlist_netdevice(dev);
 
 		dev->reg_state = NETREG_UNREGISTERING;
+		on_each_cpu(flush_backlog, dev, 1);
 	}
 
 	synchronize_net();
@@ -6310,8 +6314,6 @@ void netdev_run_todo(void)
 
 		dev->reg_state = NETREG_UNREGISTERED;
 
-		on_each_cpu(flush_backlog, dev, 1);
-
 		netdev_wait_allrefs(dev);
 
 		/* paranoia */

[PATCH 3.14 51/84] net: call rcu_read_lock early in process_backlog

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Anastasov <ja@ssi.bg>

[ Upstream commit 2c17d27c36dcce2b6bf689f41a46b9e909877c21 ]

Incoming packet should be either in backlog queue or
in RCU read-side section. Otherwise, the final sequence of
flush_backlog() and synchronize_net() may miss packets
that can run without device reference:

CPU 1                  CPU 2
                       skb->dev: no reference
                       process_backlog:__skb_dequeue
                       process_backlog:local_irq_enable

on_each_cpu for
flush_backlog =>       IPI(hardirq): flush_backlog
                       - packet not found in backlog

                       CPU delayed ...
synchronize_net
- no ongoing RCU
read-side sections

netdev_run_todo,
rcu_barrier: no
ongoing callbacks
                       __netif_receive_skb_core:rcu_read_lock
                       - too late
free dev
                       process packet for freed dev

Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue")
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |   29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3554,8 +3554,6 @@ static int __netif_receive_skb_core(stru
 
 	pt_prev = NULL;
 
-	rcu_read_lock();
-
 another_round:
 	skb->skb_iif = skb->dev->ifindex;
 
@@ -3565,7 +3563,7 @@ another_round:
 	    skb->protocol == cpu_to_be16(ETH_P_8021AD)) {
 		skb = skb_vlan_untag(skb);
 		if (unlikely(!skb))
-			goto unlock;
+			goto out;
 	}
 
 #ifdef CONFIG_NET_CLS_ACT
@@ -3590,7 +3588,7 @@ skip_taps:
 #ifdef CONFIG_NET_CLS_ACT
 	skb = handle_ing(skb, &pt_prev, &ret, orig_dev);
 	if (!skb)
-		goto unlock;
+		goto out;
 ncls:
 #endif
 
@@ -3605,7 +3603,7 @@ ncls:
 		if (vlan_do_receive(&skb))
 			goto another_round;
 		else if (unlikely(!skb))
-			goto unlock;
+			goto out;
 	}
 
 	rx_handler = rcu_dereference(skb->dev->rx_handler);
@@ -3617,7 +3615,7 @@ ncls:
 		switch (rx_handler(&skb)) {
 		case RX_HANDLER_CONSUMED:
 			ret = NET_RX_SUCCESS;
-			goto unlock;
+			goto out;
 		case RX_HANDLER_ANOTHER:
 			goto another_round;
 		case RX_HANDLER_EXACT:
@@ -3669,8 +3667,6 @@ drop:
 		ret = NET_RX_DROP;
 	}
 
-unlock:
-	rcu_read_unlock();
 out:
 	return ret;
 }
@@ -3702,29 +3698,30 @@ static int __netif_receive_skb(struct sk
 
 static int netif_receive_skb_internal(struct sk_buff *skb)
 {
+	int ret;
+
 	net_timestamp_check(netdev_tstamp_prequeue, skb);
 
 	if (skb_defer_rx_timestamp(skb))
 		return NET_RX_SUCCESS;
 
+	rcu_read_lock();
+
 #ifdef CONFIG_RPS
 	if (static_key_false(&rps_needed)) {
 		struct rps_dev_flow voidflow, *rflow = &voidflow;
-		int cpu, ret;
-
-		rcu_read_lock();
-
-		cpu = get_rps_cpu(skb->dev, skb, &rflow);
+		int cpu = get_rps_cpu(skb->dev, skb, &rflow);
 
 		if (cpu >= 0) {
 			ret = enqueue_to_backlog(skb, cpu, &rflow->last_qtail);
 			rcu_read_unlock();
 			return ret;
 		}
-		rcu_read_unlock();
 	}
 #endif
-	return __netif_receive_skb(skb);
+	ret = __netif_receive_skb(skb);
+	rcu_read_unlock();
+	return ret;
 }
 
 /**
@@ -4185,8 +4182,10 @@ static int process_backlog(struct napi_s
 		unsigned int qlen;
 
 		while ((skb = __skb_dequeue(&sd->process_queue))) {
+			rcu_read_lock();
 			local_irq_enable();
 			__netif_receive_skb(skb);
+			rcu_read_unlock();
 			local_irq_disable();
 			input_queue_head_incr(sd);
 			if (++work >= quota) {

[PATCH 3.14 52/84] net: Clone skb before setting peeked flag

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit 738ac1ebb96d02e0d23bc320302a6ea94c612dec ]

Shared skbs must not be modified and this is crucial for broadcast
and/or multicast paths where we use it as an optimisation to avoid
unnecessary cloning.

The function skb_recv_datagram breaks this rule by setting peeked
without cloning the skb first.  This causes funky races which leads
to double-free.

This patch fixes this by cloning the skb and replacing the skb
in the list when setting skb->peeked.

Fixes: a59322be07c9 ("[UDP]: Only increment counter on first peek/recv")
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/datagram.c |   41 ++++++++++++++++++++++++++++++++++++++---
 1 file changed, 38 insertions(+), 3 deletions(-)

--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -130,6 +130,35 @@ out_noerr:
 	goto out;
 }
 
+static int skb_set_peeked(struct sk_buff *skb)
+{
+	struct sk_buff *nskb;
+
+	if (skb->peeked)
+		return 0;
+
+	/* We have to unshare an skb before modifying it. */
+	if (!skb_shared(skb))
+		goto done;
+
+	nskb = skb_clone(skb, GFP_ATOMIC);
+	if (!nskb)
+		return -ENOMEM;
+
+	skb->prev->next = nskb;
+	skb->next->prev = nskb;
+	nskb->prev = skb->prev;
+	nskb->next = skb->next;
+
+	consume_skb(skb);
+	skb = nskb;
+
+done:
+	skb->peeked = 1;
+
+	return 0;
+}
+
 /**
  *	__skb_recv_datagram - Receive a datagram skbuff
  *	@sk: socket
@@ -164,7 +193,9 @@ out_noerr:
 struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned int flags,
 				    int *peeked, int *off, int *err)
 {
+	struct sk_buff_head *queue = &sk->sk_receive_queue;
 	struct sk_buff *skb, *last;
+	unsigned long cpu_flags;
 	long timeo;
 	/*
 	 * Caller is allowed not to check sk->sk_err before skb_recv_datagram()
@@ -183,8 +214,6 @@ struct sk_buff *__skb_recv_datagram(stru
 		 * Look at current nfs client by the way...
 		 * However, this function was correct in any case. 8)
 		 */
-		unsigned long cpu_flags;
-		struct sk_buff_head *queue = &sk->sk_receive_queue;
 		int _off = *off;
 
 		last = (struct sk_buff *)queue;
@@ -198,7 +227,11 @@ struct sk_buff *__skb_recv_datagram(stru
 					_off -= skb->len;
 					continue;
 				}
-				skb->peeked = 1;
+
+				error = skb_set_peeked(skb);
+				if (error)
+					goto unlock_err;
+
 				atomic_inc(&skb->users);
 			} else
 				__skb_unlink(skb, queue);
@@ -222,6 +255,8 @@ struct sk_buff *__skb_recv_datagram(stru
 
 	return NULL;
 
+unlock_err:
+	spin_unlock_irqrestore(&queue->lock, cpu_flags);
 no_packet:
 	*err = error;
 	return NULL;

[PATCH 3.14 53/84] net: Fix skb csum races when peeking

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit 89c22d8c3b278212eef6a8cc66b570bc840a6f5a ]

When we calculate the checksum on the recv path, we store the
result in the skb as an optimisation in case we need the checksum
again down the line.

This is in fact bogus for the MSG_PEEK case as this is done without
any locking.  So multiple threads can peek and then store the result
to the same skb, potentially resulting in bogus skb states.

This patch fixes this by only storing the result if the skb is not
shared.  This preserves the optimisations for the few cases where
it can be done safely due to locking or other reasons, e.g., SIOCINQ.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/datagram.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -777,7 +777,8 @@ __sum16 __skb_checksum_complete_head(str
 	if (likely(!sum)) {
 		if (unlikely(skb->ip_summed == CHECKSUM_COMPLETE))
 			netdev_rx_csum_fault(skb->dev);
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
+		if (!skb_shared(skb))
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
 	}
 	return sum;
 }

[PATCH 3.14 54/84] net: Fix skb_set_peeked use-after-free bug

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit a0a2a6602496a45ae838a96db8b8173794b5d398 ]

The commit 738ac1ebb96d02e0d23bc320302a6ea94c612dec ("net: Clone
skb before setting peeked flag") introduced a use-after-free bug
in skb_recv_datagram.  This is because skb_set_peeked may create
a new skb and free the existing one.  As it stands the caller will
continue to use the old freed skb.

This patch fixes it by making skb_set_peeked return the new skb
(or the old one if unchanged).

Fixes: 738ac1ebb96d ("net: Clone skb before setting peeked flag")
Reported-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Brenden Blanco <bblanco@plumgrid.com>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/datagram.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -130,12 +130,12 @@ out_noerr:
 	goto out;
 }
 
-static int skb_set_peeked(struct sk_buff *skb)
+static struct sk_buff *skb_set_peeked(struct sk_buff *skb)
 {
 	struct sk_buff *nskb;
 
 	if (skb->peeked)
-		return 0;
+		return skb;
 
 	/* We have to unshare an skb before modifying it. */
 	if (!skb_shared(skb))
@@ -143,7 +143,7 @@ static int skb_set_peeked(struct sk_buff
 
 	nskb = skb_clone(skb, GFP_ATOMIC);
 	if (!nskb)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 
 	skb->prev->next = nskb;
 	skb->next->prev = nskb;
@@ -156,7 +156,7 @@ static int skb_set_peeked(struct sk_buff
 done:
 	skb->peeked = 1;
 
-	return 0;
+	return skb;
 }
 
 /**
@@ -228,8 +228,9 @@ struct sk_buff *__skb_recv_datagram(stru
 					continue;
 				}
 
-				error = skb_set_peeked(skb);
-				if (error)
+				skb = skb_set_peeked(skb);
+				error = PTR_ERR(skb);
+				if (IS_ERR(skb))
 					goto unlock_err;
 
 				atomic_inc(&skb->users);

[PATCH 3.14 55/84] bridge: mdb: fix double add notification

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

[ Upstream commit 5ebc784625ea68a9570d1f70557e7932988cd1b4 ]

Since the mdb add/del code was introduced there have been 2 br_mdb_notify
calls when doing br_mdb_add() resulting in 2 notifications on each add.

Example:
 Command: bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
 Before patch:
 root@debian:~# bridge monitor all
 [MDB]dev br0 port eth1 grp 239.0.0.1 permanent
 [MDB]dev br0 port eth1 grp 239.0.0.1 permanent

 After patch:
 root@debian:~# bridge monitor all
 [MDB]dev br0 port eth1 grp 239.0.0.1 permanent

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: cfd567543590 ("bridge: add support of adding and deleting mdb entries")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_mdb.c |    1 -
 1 file changed, 1 deletion(-)

--- a/net/bridge/br_mdb.c
+++ b/net/bridge/br_mdb.c
@@ -347,7 +347,6 @@ static int br_mdb_add_group(struct net_b
 		return -ENOMEM;
 	rcu_assign_pointer(*pp, p);
 
-	br_mdb_notify(br->dev, port, group, RTM_NEWMDB);
 	return 0;
 }
 

[PATCH 3.14 56/84] isdn/gigaset: reset tty->receive_room when attaching ser_gigaset

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tilman Schmidt <tilman@imap.cc>

[ Upstream commit fd98e9419d8d622a4de91f76b306af6aa627aa9c ]

Commit 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc"),
first merged in kernel release 3.10, caused the following regression
in the Gigaset M101 driver:

Before that commit, when closing the N_TTY line discipline in
preparation to switching to N_GIGASET_M101, receive_room would be
reset to a non-zero value by the call to n_tty_flush_buffer() in
n_tty's close method. With the removal of that call, receive_room
might be left at zero, blocking data reception on the serial line.

The present patch fixes that regression by setting receive_room
to an appropriate value in the ldisc open method.

Fixes: 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc")
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/isdn/gigaset/ser-gigaset.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -524,9 +524,18 @@ gigaset_tty_open(struct tty_struct *tty)
 	cs->hw.ser->tty = tty;
 	atomic_set(&cs->hw.ser->refcnt, 1);
 	init_completion(&cs->hw.ser->dead_cmp);
-
 	tty->disc_data = cs;
 
+	/* Set the amount of data we're willing to receive per call
+	 * from the hardware driver to half of the input buffer size
+	 * to leave some reserve.
+	 * Note: We don't do flow control towards the hardware driver.
+	 * If more data is received than will fit into the input buffer,
+	 * it will be dropped and an error will be logged. This should
+	 * never happen as the device is slow and the buffer size ample.
+	 */
+	tty->receive_room = RBUFSIZE/2;
+
 	/* OK.. Initialization of the datastructures and the HW is done.. Now
 	 * startup system and notify the LL that we are ready to run
 	 */

[PATCH 3.14 57/84] ipv6: lock socket in ip6_datagram_connect()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 03645a11a570d52e70631838cb786eb4253eb463 ]

ip6_datagram_connect() is doing a lot of socket changes without
socket being locked.

This looks wrong, at least for udp_lib_rehash() which could corrupt
lists because of concurrent udp_sk(sk)->udp_portaddr_hash accesses.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ip.h    |    1 +
 net/ipv4/datagram.c |   16 ++++++++++++----
 net/ipv6/datagram.c |   20 +++++++++++++++-----
 3 files changed, 28 insertions(+), 9 deletions(-)

--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -154,6 +154,7 @@ static inline __u8 get_rtconn_flags(stru
 }
 
 /* datagram.c */
+int __ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len);
 int ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len);
 
 void ip4_datagram_release_cb(struct sock *sk);
--- a/net/ipv4/datagram.c
+++ b/net/ipv4/datagram.c
@@ -20,7 +20,7 @@
 #include <net/route.h>
 #include <net/tcp_states.h>
 
-int ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
+int __ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 {
 	struct inet_sock *inet = inet_sk(sk);
 	struct sockaddr_in *usin = (struct sockaddr_in *) uaddr;
@@ -39,8 +39,6 @@ int ip4_datagram_connect(struct sock *sk
 
 	sk_dst_reset(sk);
 
-	lock_sock(sk);
-
 	oif = sk->sk_bound_dev_if;
 	saddr = inet->inet_saddr;
 	if (ipv4_is_multicast(usin->sin_addr.s_addr)) {
@@ -81,9 +79,19 @@ int ip4_datagram_connect(struct sock *sk
 	sk_dst_set(sk, &rt->dst);
 	err = 0;
 out:
-	release_sock(sk);
 	return err;
 }
+EXPORT_SYMBOL(__ip4_datagram_connect);
+
+int ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
+{
+	int res;
+
+	lock_sock(sk);
+	res = __ip4_datagram_connect(sk, uaddr, addr_len);
+	release_sock(sk);
+	return res;
+}
 EXPORT_SYMBOL(ip4_datagram_connect);
 
 /* Because UDP xmit path can manipulate sk_dst_cache without holding
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -40,7 +40,7 @@ static bool ipv6_mapped_addr_any(const s
 	return ipv6_addr_v4mapped(a) && (a->s6_addr32[3] == 0);
 }
 
-int ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
+static int __ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 {
 	struct sockaddr_in6	*usin = (struct sockaddr_in6 *) uaddr;
 	struct inet_sock      	*inet = inet_sk(sk);
@@ -56,7 +56,7 @@ int ip6_datagram_connect(struct sock *sk
 	if (usin->sin6_family == AF_INET) {
 		if (__ipv6_only_sock(sk))
 			return -EAFNOSUPPORT;
-		err = ip4_datagram_connect(sk, uaddr, addr_len);
+		err = __ip4_datagram_connect(sk, uaddr, addr_len);
 		goto ipv4_connected;
 	}
 
@@ -98,9 +98,9 @@ int ip6_datagram_connect(struct sock *sk
 		sin.sin_addr.s_addr = daddr->s6_addr32[3];
 		sin.sin_port = usin->sin6_port;
 
-		err = ip4_datagram_connect(sk,
-					   (struct sockaddr *) &sin,
-					   sizeof(sin));
+		err = __ip4_datagram_connect(sk,
+					     (struct sockaddr *) &sin,
+					     sizeof(sin));
 
 ipv4_connected:
 		if (err)
@@ -203,6 +203,16 @@ out:
 	fl6_sock_release(flowlabel);
 	return err;
 }
+
+int ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
+{
+	int res;
+
+	lock_sock(sk);
+	res = __ip6_datagram_connect(sk, uaddr, addr_len);
+	release_sock(sk);
+	return res;
+}
 EXPORT_SYMBOL_GPL(ip6_datagram_connect);
 
 int ip6_datagram_connect_v6_only(struct sock *sk, struct sockaddr *uaddr,

[PATCH 3.14 58/84] bonding: fix destruction of bond with devices different from arphrd_ether

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

[ Upstream commit 06f6d1094aa0992432b1e2a0920b0ee86ccd83bf ]

When the bonding is being unloaded and the netdevice notifier is
unregistered it executes NETDEV_UNREGISTER for each device which should
remove the bond's proc entry but if the device enslaved is not of
ARPHRD_ETHER type and is in front of the bonding, it may execute
bond_release_and_destroy() first which would release the last slave and
destroy the bond device leaving the proc entry and thus we will get the
following error (with dynamic debug on for bond_netdev_event to see the
events order):
[  908.963051] eql: event: 9
[  908.963052] eql: IFF_SLAVE
[  908.963054] eql: event: 2
[  908.963056] eql: IFF_SLAVE
[  908.963058] eql: event: 6
[  908.963059] eql: IFF_SLAVE
[  908.963110] bond0: Releasing active interface eql
[  908.976168] bond0: Destroying bond bond0
[  908.976266] bond0 (unregistering): Released all slaves
[  908.984097] ------------[ cut here ]------------
[  908.984107] WARNING: CPU: 0 PID: 1787 at fs/proc/generic.c:575
remove_proc_entry+0x112/0x160()
[  908.984110] remove_proc_entry: removing non-empty directory
'net/bonding', leaking at least 'bond0'
[  908.984111] Modules linked in: bonding(-) eql(O) 9p nfsd auth_rpcgss
oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul
crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev qxl drm_kms_helper
snd_hda_codec_generic aesni_intel ttm aes_x86_64 glue_helper pcspkr lrw
gf128mul ablk_helper cryptd snd_hda_intel virtio_console snd_hda_codec
psmouse serio_raw snd_hwdep snd_hda_core 9pnet_virtio 9pnet evdev joydev
drm virtio_balloon snd_pcm snd_timer snd soundcore i2c_piix4 i2c_core
pvpanic acpi_cpufreq parport_pc parport processor thermal_sys button
autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid sg sr_mod cdrom
ata_generic virtio_blk virtio_net floppy ata_piix e1000 libata ehci_pci
virtio_pci scsi_mod uhci_hcd ehci_hcd virtio_ring virtio usbcore
usb_common [last unloaded: bonding]

[  908.984168] CPU: 0 PID: 1787 Comm: rmmod Tainted: G        W  O
4.2.0-rc2+ #8
[  908.984170] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  908.984172]  0000000000000000 ffffffff81732d41 ffffffff81525b34
ffff8800358dfda8
[  908.984175]  ffffffff8106c521 ffff88003595af78 ffff88003595af40
ffff88003e3a4280
[  908.984178]  ffffffffa058d040 0000000000000000 ffffffff8106c59a
ffffffff8172ebd0
[  908.984181] Call Trace:
[  908.984188]  [<ffffffff81525b34>] ? dump_stack+0x40/0x50
[  908.984193]  [<ffffffff8106c521>] ? warn_slowpath_common+0x81/0xb0
[  908.984196]  [<ffffffff8106c59a>] ? warn_slowpath_fmt+0x4a/0x50
[  908.984199]  [<ffffffff81218352>] ? remove_proc_entry+0x112/0x160
[  908.984205]  [<ffffffffa05850e6>] ? bond_destroy_proc_dir+0x26/0x30
[bonding]
[  908.984208]  [<ffffffffa057540e>] ? bond_net_exit+0x8e/0xa0 [bonding]
[  908.984217]  [<ffffffff8142f407>] ? ops_exit_list.isra.4+0x37/0x70
[  908.984225]  [<ffffffff8142f52d>] ?
unregister_pernet_operations+0x8d/0xd0
[  908.984228]  [<ffffffff8142f58d>] ?
unregister_pernet_subsys+0x1d/0x30
[  908.984232]  [<ffffffffa0585269>] ? bonding_exit+0x23/0xdba [bonding]
[  908.984236]  [<ffffffff810e28ba>] ? SyS_delete_module+0x18a/0x250
[  908.984241]  [<ffffffff81086f99>] ? task_work_run+0x89/0xc0
[  908.984244]  [<ffffffff8152b732>] ?
entry_SYSCALL_64_fastpath+0x16/0x75
[  908.984247] ---[ end trace 7c006ed4abbef24b ]---

Thus remove the proc entry manually if bond_release_and_destroy() is
used. Because of the checks in bond_remove_proc_entry() it's not a
problem for a bond device to change namespaces (the bug fixed by the
Fixes commit) but since commit
f9399814927ad ("bonding: Don't allow bond devices to change network
namespaces.") that can't happen anyway.

Reported-by: Carol Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: a64d49c3dd50 ("bonding: Manage /proc/net/bonding/ entries from
                      the netdev events")
Tested-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/bonding/bond_main.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1825,6 +1825,7 @@ static int  bond_release_and_destroy(str
 		bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
 		pr_info("%s: destroying bond %s.\n",
 			bond_dev->name, bond_dev->name);
+		bond_remove_proc_entry(bond);
 		unregister_netdevice(bond_dev);
 	}
 	return ret;

[PATCH 3.14 59/84] bonding: correct the MAC address for "follow" fail_over_mac policy

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: dingtianhong <dingtianhong@huawei.com>

[ Upstream commit a951bc1e6ba58f11df5ed5ddc41311e10f5fd20b ]

The "follow" fail_over_mac policy is useful for multiport devices that
either become confused or incur a performance penalty when multiple
ports are programmed with the same MAC address, but the same MAC
address still may happened by this steps for this policy:

1) echo +eth0 > /sys/class/net/bond0/bonding/slaves
   bond0 has the same mac address with eth0, it is MAC1.

2) echo +eth1 > /sys/class/net/bond0/bonding/slaves
   eth1 is backup, eth1 has MAC2.

3) ifconfig eth0 down
   eth1 became active slave, bond will swap MAC for eth0 and eth1,
   so eth1 has MAC1, and eth0 has MAC2.

4) ifconfig eth1 down
   there is no active slave, and eth1 still has MAC1, eth2 has MAC2.

5) ifconfig eth0 up
   the eth0 became active slave again, the bond set eth0 to MAC1.

Something wrong here, then if you set eth1 up, the eth0 and eth1 will have the same
MAC address, it will break this policy for ACTIVE_BACKUP mode.

This patch will fix this problem by finding the old active slave and
swap them MAC address before change active slave.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Tested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/bonding/bond_main.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -636,6 +636,23 @@ static void bond_set_dev_addr(struct net
 	call_netdevice_notifiers(NETDEV_CHANGEADDR, bond_dev);
 }
 
+static struct slave *bond_get_old_active(struct bonding *bond,
+					 struct slave *new_active)
+{
+	struct slave *slave;
+	struct list_head *iter;
+
+	bond_for_each_slave(bond, slave, iter) {
+		if (slave == new_active)
+			continue;
+
+		if (ether_addr_equal(bond->dev->dev_addr, slave->dev->dev_addr))
+			return slave;
+	}
+
+	return NULL;
+}
+
 /*
  * bond_do_fail_over_mac
  *
@@ -672,6 +689,9 @@ static void bond_do_fail_over_mac(struct
 
 		write_unlock_bh(&bond->curr_slave_lock);
 
+		if (!old_active)
+			old_active = bond_get_old_active(bond, new_active);
+
 		if (old_active) {
 			memcpy(tmp_mac, new_active->dev->dev_addr, ETH_ALEN);
 			memcpy(saddr.sa_data, old_active->dev->dev_addr,

[PATCH 3.14 60/84] inet: frags: fix defragmented packets IP header for af_packet

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Edward Hyunkoo Jee <edjee@google.com>

[ Upstream commit 0848f6428ba3a2e42db124d41ac6f548655735bf ]

When ip_frag_queue() computes positions, it assumes that the passed
sk_buff does not contain L2 headers.

However, when PACKET_FANOUT_FLAG_DEFRAG is used, IP reassembly
functions can be called on outgoing packets that contain L2 headers.

Also, IPv4 checksum is not corrected after reassembly.

Fixes: 7736d33f4262 ("packet: Add pre-defragmentation support for ipv4 fanouts.")
Signed-off-by: Edward Hyunkoo Jee <edjee@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_fragment.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -357,7 +357,7 @@ static int ip_frag_queue(struct ipq *qp,
 	ihl = ip_hdrlen(skb);
 
 	/* Determine the position of this fragment. */
-	end = offset + skb->len - ihl;
+	end = offset + skb->len - skb_network_offset(skb) - ihl;
 	err = -EINVAL;
 
 	/* Is this the final fragment? */
@@ -387,7 +387,7 @@ static int ip_frag_queue(struct ipq *qp,
 		goto err;
 
 	err = -ENOMEM;
-	if (pskb_pull(skb, ihl) == NULL)
+	if (!pskb_pull(skb, skb_network_offset(skb) + ihl))
 		goto err;
 
 	err = pskb_trim_rcsum(skb, end - offset);
@@ -628,6 +628,9 @@ static int ip_frag_reasm(struct ipq *qp,
 	iph->frag_off = qp->q.max_size ? htons(IP_DF) : 0;
 	iph->tot_len = htons(len);
 	iph->tos |= ecn;
+
+	ip_send_check(iph);
+
 	IP_INC_STATS_BH(net, IPSTATS_MIB_REASMOKS);
 	qp->q.fragments = NULL;
 	qp->q.fragments_tail = NULL;

[PATCH 3.14 61/84] netlink: dont hold mutex in rcu callback when releasing mmapd ring

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 0470eb99b4721586ccac954faac3fa4472da0845 ]

Kirill A. Shutemov says:

This simple test-case trigers few locking asserts in kernel:

int main(int argc, char **argv)
{
        unsigned int block_size = 16 * 4096;
        struct nl_mmap_req req = {
                .nm_block_size          = block_size,
                .nm_block_nr            = 64,
                .nm_frame_size          = 16384,
                .nm_frame_nr            = 64 * block_size / 16384,
        };
        unsigned int ring_size;
	int fd;

	fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC);
        if (setsockopt(fd, SOL_NETLINK, NETLINK_RX_RING, &req, sizeof(req)) < 0)
                exit(1);
        if (setsockopt(fd, SOL_NETLINK, NETLINK_TX_RING, &req, sizeof(req)) < 0)
                exit(1);

	ring_size = req.nm_block_nr * req.nm_block_size;
	mmap(NULL, 2 * ring_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
	return 0;
}

+++ exited with 0 +++
BUG: sleeping function called from invalid context at /home/kas/git/public/linux-mm/kernel/locking/mutex.c:616
in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: init
3 locks held by init/1:
 #0:  (reboot_mutex){+.+...}, at: [<ffffffff81080959>] SyS_reboot+0xa9/0x220
 #1:  ((reboot_notifier_list).rwsem){.+.+..}, at: [<ffffffff8107f379>] __blocking_notifier_call_chain+0x39/0x70
 #2:  (rcu_callback){......}, at: [<ffffffff810d32e0>] rcu_do_batch.isra.49+0x160/0x10c0
Preemption disabled at:[<ffffffff8145365f>] __delay+0xf/0x20

CPU: 1 PID: 1 Comm: init Not tainted 4.1.0-00009-gbddf4c4818e0 #253
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Debian-1.8.2-1 04/01/2014
 ffff88017b3d8000 ffff88027bc03c38 ffffffff81929ceb 0000000000000102
 0000000000000000 ffff88027bc03c68 ffffffff81085a9d 0000000000000002
 ffffffff81ca2a20 0000000000000268 0000000000000000 ffff88027bc03c98
Call Trace:
 <IRQ>  [<ffffffff81929ceb>] dump_stack+0x4f/0x7b
 [<ffffffff81085a9d>] ___might_sleep+0x16d/0x270
 [<ffffffff81085bed>] __might_sleep+0x4d/0x90
 [<ffffffff8192e96f>] mutex_lock_nested+0x2f/0x430
 [<ffffffff81932fed>] ? _raw_spin_unlock_irqrestore+0x5d/0x80
 [<ffffffff81464143>] ? __this_cpu_preempt_check+0x13/0x20
 [<ffffffff8182fc3d>] netlink_set_ring+0x1ed/0x350
 [<ffffffff8182e000>] ? netlink_undo_bind+0x70/0x70
 [<ffffffff8182fe20>] netlink_sock_destruct+0x80/0x150
 [<ffffffff817e484d>] __sk_free+0x1d/0x160
 [<ffffffff817e49a9>] sk_free+0x19/0x20
[..]

Cong Wang says:

We can't hold mutex lock in a rcu callback, [..]

Thomas Graf says:

The socket should be dead at this point. It might be simpler to
add a netlink_release_ring() function which doesn't require
locking at all.

Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Diagnosed-by: Cong Wang <cwang@twopensource.com>
Suggested-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netlink/af_netlink.c |   79 +++++++++++++++++++++++++++--------------------
 1 file changed, 47 insertions(+), 32 deletions(-)

--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -350,25 +350,52 @@ err1:
 	return NULL;
 }
 
+
+static void
+__netlink_set_ring(struct sock *sk, struct nl_mmap_req *req, bool tx_ring, void **pg_vec,
+		   unsigned int order)
+{
+	struct netlink_sock *nlk = nlk_sk(sk);
+	struct sk_buff_head *queue;
+	struct netlink_ring *ring;
+
+	queue = tx_ring ? &sk->sk_write_queue : &sk->sk_receive_queue;
+	ring  = tx_ring ? &nlk->tx_ring : &nlk->rx_ring;
+
+	spin_lock_bh(&queue->lock);
+
+	ring->frame_max		= req->nm_frame_nr - 1;
+	ring->head		= 0;
+	ring->frame_size	= req->nm_frame_size;
+	ring->pg_vec_pages	= req->nm_block_size / PAGE_SIZE;
+
+	swap(ring->pg_vec_len, req->nm_block_nr);
+	swap(ring->pg_vec_order, order);
+	swap(ring->pg_vec, pg_vec);
+
+	__skb_queue_purge(queue);
+	spin_unlock_bh(&queue->lock);
+
+	WARN_ON(atomic_read(&nlk->mapped));
+
+	if (pg_vec)
+		free_pg_vec(pg_vec, order, req->nm_block_nr);
+}
+
 static int netlink_set_ring(struct sock *sk, struct nl_mmap_req *req,
-			    bool closing, bool tx_ring)
+			    bool tx_ring)
 {
 	struct netlink_sock *nlk = nlk_sk(sk);
 	struct netlink_ring *ring;
-	struct sk_buff_head *queue;
 	void **pg_vec = NULL;
 	unsigned int order = 0;
-	int err;
 
 	ring  = tx_ring ? &nlk->tx_ring : &nlk->rx_ring;
-	queue = tx_ring ? &sk->sk_write_queue : &sk->sk_receive_queue;
 
-	if (!closing) {
-		if (atomic_read(&nlk->mapped))
-			return -EBUSY;
-		if (atomic_read(&ring->pending))
-			return -EBUSY;
-	}
+	if (atomic_read(&nlk->mapped))
+		return -EBUSY;
+	if (atomic_read(&ring->pending))
+		return -EBUSY;
 
 	if (req->nm_block_nr) {
 		if (ring->pg_vec != NULL)
@@ -400,31 +427,19 @@ static int netlink_set_ring(struct sock
 			return -EINVAL;
 	}
 
-	err = -EBUSY;
 	mutex_lock(&nlk->pg_vec_lock);
-	if (closing || atomic_read(&nlk->mapped) == 0) {
-		err = 0;
-		spin_lock_bh(&queue->lock);
-
-		ring->frame_max		= req->nm_frame_nr - 1;
-		ring->head		= 0;
-		ring->frame_size	= req->nm_frame_size;
-		ring->pg_vec_pages	= req->nm_block_size / PAGE_SIZE;
-
-		swap(ring->pg_vec_len, req->nm_block_nr);
-		swap(ring->pg_vec_order, order);
-		swap(ring->pg_vec, pg_vec);
-
-		__skb_queue_purge(queue);
-		spin_unlock_bh(&queue->lock);
-
-		WARN_ON(atomic_read(&nlk->mapped));
+	if (atomic_read(&nlk->mapped) == 0) {
+		__netlink_set_ring(sk, req, tx_ring, pg_vec, order);
+		mutex_unlock(&nlk->pg_vec_lock);
+		return 0;
 	}
+
 	mutex_unlock(&nlk->pg_vec_lock);
 
 	if (pg_vec)
 		free_pg_vec(pg_vec, order, req->nm_block_nr);
-	return err;
+
+	return -EBUSY;
 }
 
 static void netlink_mm_open(struct vm_area_struct *vma)
@@ -893,10 +908,10 @@ static void netlink_sock_destruct(struct
 
 		memset(&req, 0, sizeof(req));
 		if (nlk->rx_ring.pg_vec)
-			netlink_set_ring(sk, &req, true, false);
+			__netlink_set_ring(sk, &req, false, NULL, 0);
 		memset(&req, 0, sizeof(req));
 		if (nlk->tx_ring.pg_vec)
-			netlink_set_ring(sk, &req, true, true);
+			__netlink_set_ring(sk, &req, true, NULL, 0);
 	}
 #endif /* CONFIG_NETLINK_MMAP */
 
@@ -2190,7 +2205,7 @@ static int netlink_setsockopt(struct soc
 			return -EINVAL;
 		if (copy_from_user(&req, optval, sizeof(req)))
 			return -EFAULT;
-		err = netlink_set_ring(sk, &req, false,
+		err = netlink_set_ring(sk, &req,
 				       optname == NETLINK_TX_RING);
 		break;
 	}

[PATCH 3.14 62/84] net/mlx4_core: Fix wrong index in propagating port change event to VFs

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jack Morgenstein <jackm@dev.mellanox.co.il>

[ Upstream commit 1c1bf34951e8d17941bf708d1901c47e81b15d55 ]

The port-change event processing in procedure mlx4_eq_int() uses "slave"
as the vf_oper array index. Since the value of "slave" is the PF function
index, the result is that the PF link state is used for deciding to
propagate the event for all the VFs. The VF link state should be used,
so the VF function index should be used here.

Fixes: 948e306d7d64 ('net/mlx4: Add VF link state support')
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx4/eq.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -557,7 +557,7 @@ static int mlx4_eq_int(struct mlx4_dev *
 						mlx4_dbg(dev, "%s: Sending MLX4_PORT_CHANGE_SUBTYPE_DOWN"
 							 " to slave: %d, port:%d\n",
 							 __func__, i, port);
-						s_info = &priv->mfunc.master.vf_oper[slave].vport[port].state;
+						s_info = &priv->mfunc.master.vf_oper[i].vport[port].state;
 						if (IFLA_VF_LINK_STATE_AUTO == s_info->link_state)
 							mlx4_slave_event(dev, i, eqe);
 					} else {  /* IB port */
@@ -583,7 +583,7 @@ static int mlx4_eq_int(struct mlx4_dev *
 					for (i = 0; i < dev->num_slaves; i++) {
 						if (i == mlx4_master_func_num(dev))
 							continue;
-						s_info = &priv->mfunc.master.vf_oper[slave].vport[port].state;
+						s_info = &priv->mfunc.master.vf_oper[i].vport[port].state;
 						if (IFLA_VF_LINK_STATE_AUTO == s_info->link_state)
 							mlx4_slave_event(dev, i, eqe);
 					}

[PATCH 3.14 63/84] ip6_gre: release cached dst on tunnel removal

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: huaibin Wang <huaibin.wang@6wind.com>

[ Upstream commit d4257295ba1b389c693b79de857a96e4b7cd8ac0 ]

When a tunnel is deleted, the cached dst entry should be released.

This problem may prevent the removal of a netns (seen with a x-netns IPv6
gre tunnel):
  unregister_netdevice: waiting for lo to become free. Usage count = 3

CC: Dmitry Kozlov <xeb@mail.ru>
Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: huaibin Wang <huaibin.wang@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_gre.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -357,6 +357,7 @@ static void ip6gre_tunnel_uninit(struct
 	struct ip6gre_net *ign = net_generic(net, ip6gre_net_id);
 
 	ip6gre_tunnel_unlink(ign, netdev_priv(dev));
+	ip6_tnl_dst_reset(netdev_priv(dev));
 	dev_put(dev);
 }
 

[PATCH 3.14 64/84] usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eugene Shatokhin <eugene.shatokhin@rosalab.ru>

[ Upstream commit f50791ac1aca1ac1b0370d62397b43e9f831421a ]

It is needed to check EVENT_NO_RUNTIME_PM bit of dev->flags in
usbnet_stop(), but its value should be read before it is cleared
when dev->flags is set to 0.

The problem was spotted and the fix was provided by
Oliver Neukum <oneukum@suse.de>.

Signed-off-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/usbnet.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -778,7 +778,7 @@ int usbnet_stop (struct net_device *net)
 {
 	struct usbnet		*dev = netdev_priv(net);
 	struct driver_info	*info = dev->driver_info;
-	int			retval, pm;
+	int			retval, pm, mpn;
 
 	clear_bit(EVENT_DEV_OPEN, &dev->flags);
 	netif_stop_queue (net);
@@ -809,6 +809,8 @@ int usbnet_stop (struct net_device *net)
 
 	usbnet_purge_paused_rxq(dev);
 
+	mpn = !test_and_clear_bit(EVENT_NO_RUNTIME_PM, &dev->flags);
+
 	/* deferred work (task, timer, softirq) must also stop.
 	 * can't flush_scheduled_work() until we drop rtnl (later),
 	 * else workers could deadlock; so make workers a NOP.
@@ -819,8 +821,7 @@ int usbnet_stop (struct net_device *net)
 	if (!pm)
 		usb_autopm_put_interface(dev->intf);
 
-	if (info->manage_power &&
-	    !test_and_clear_bit(EVENT_NO_RUNTIME_PM, &dev->flags))
+	if (info->manage_power && mpn)
 		info->manage_power(dev, 0);
 	else
 		usb_autopm_put_interface(dev->intf);

[PATCH 3.14 65/84] ipv6: fix exthdrs offload registration in out_rt path

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <daniel@iogearbox.net>

[ Upstream commit e41b0bedba0293b9e1e8d1e8ed553104b9693656 ]

We previously register IPPROTO_ROUTING offload under inet6_add_offload(),
but in error path, we try to unregister it with inet_del_offload(). This
doesn't seem correct, it should actually be inet6_del_offload(), also
ipv6_exthdrs_offload_exit() from that commit seems rather incorrect (it
also uses rthdr_offload twice), but it got removed entirely later on.

Fixes: 3336288a9fea ("ipv6: Switch to using new offload infrastructure.")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/exthdrs_offload.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv6/exthdrs_offload.c
+++ b/net/ipv6/exthdrs_offload.c
@@ -36,6 +36,6 @@ out:
 	return ret;
 
 out_rt:
-	inet_del_offload(&rthdr_offload, IPPROTO_ROUTING);
+	inet6_del_offload(&rthdr_offload, IPPROTO_ROUTING);
 	goto out;
 }

[PATCH 3.14 66/84] net/ipv6: Correct PIM6 mrt_lock handling

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Laing <richard.laing@alliedtelesis.co.nz>

[ Upstream commit 25b4a44c19c83d98e8c0807a7ede07c1f28eab8b ]

In the IPv6 multicast routing code the mrt_lock was not being released
correctly in the MFC iterator, as a result adding or deleting a MIF would
cause a hang because the mrt_lock could not be acquired.

This fix is a copy of the code for the IPv4 case and ensures that the lock
is released correctly.

Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6mr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -552,7 +552,7 @@ static void ipmr_mfc_seq_stop(struct seq
 
 	if (it->cache == &mrt->mfc6_unres_queue)
 		spin_unlock_bh(&mfc_unres_lock);
-	else if (it->cache == mrt->mfc6_cache_array)
+	else if (it->cache == &mrt->mfc6_cache_array[it->ct])
 		read_unlock(&mrt_lock);
 }
 

[PATCH 3.14 67/84] netlink, mmap: transform mmap skb into full skb on taps

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <daniel@iogearbox.net>

[ Upstream commit 1853c949646005b5959c483becde86608f548f24 ]

Ken-ichirou reported that running netlink in mmap mode for receive in
combination with nlmon will throw a NULL pointer dereference in
__kfree_skb() on nlmon_xmit(), in my case I can also trigger an "unable
to handle kernel paging request". The problem is the skb_clone() in
__netlink_deliver_tap_skb() for skbs that are mmaped.

I.e. the cloned skb doesn't have a destructor, whereas the mmap netlink
skb has it pointed to netlink_skb_destructor(), set in the handler
netlink_ring_setup_skb(). There, skb->head is being set to NULL, so
that in such cases, __kfree_skb() doesn't perform a skb_release_data()
via skb_release_all(), where skb->head is possibly being freed through
kfree(head) into slab allocator, although netlink mmap skb->head points
to the mmap buffer. Similarly, the same has to be done also for large
netlink skbs where the data area is vmalloced. Therefore, as discussed,
make a copy for these rather rare cases for now. This fixes the issue
on my and Ken-ichirou's test-cases.

Reference: http://thread.gmane.org/gmane.linux.network/371129
Fixes: bcbde0d449ed ("net: netlink: virtual tap device management")
Reported-by: Ken-ichirou MATSUZAWA <chamaken@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ken-ichirou MATSUZAWA <chamaken@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netlink/af_netlink.c |   30 +++++++++++++++++++++++-------
 net/netlink/af_netlink.h |    9 +++++++++
 2 files changed, 32 insertions(+), 7 deletions(-)

--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -115,6 +115,24 @@ static inline struct hlist_head *nl_port
 	return &hash->table[jhash_1word(portid, hash->rnd) & hash->mask];
 }
 
+static struct sk_buff *netlink_to_full_skb(const struct sk_buff *skb,
+					   gfp_t gfp_mask)
+{
+	unsigned int len = skb_end_offset(skb);
+	struct sk_buff *new;
+
+	new = alloc_skb(len, gfp_mask);
+	if (new == NULL)
+		return NULL;
+
+	NETLINK_CB(new).portid = NETLINK_CB(skb).portid;
+	NETLINK_CB(new).dst_group = NETLINK_CB(skb).dst_group;
+	NETLINK_CB(new).creds = NETLINK_CB(skb).creds;
+
+	memcpy(skb_put(new, len), skb->data, len);
+	return new;
+}
+
 int netlink_add_tap(struct netlink_tap *nt)
 {
 	if (unlikely(nt->dev->type != ARPHRD_NETLINK))
@@ -199,7 +217,11 @@ static int __netlink_deliver_tap_skb(str
 	int ret = -ENOMEM;
 
 	dev_hold(dev);
-	nskb = skb_clone(skb, GFP_ATOMIC);
+
+	if (netlink_skb_is_mmaped(skb) || is_vmalloc_addr(skb->head))
+		nskb = netlink_to_full_skb(skb, GFP_ATOMIC);
+	else
+		nskb = skb_clone(skb, GFP_ATOMIC);
 	if (nskb) {
 		nskb->dev = dev;
 		nskb->protocol = htons((u16) sk->sk_protocol);
@@ -271,11 +293,6 @@ static void netlink_rcv_wake(struct sock
 }
 
 #ifdef CONFIG_NETLINK_MMAP
-static bool netlink_skb_is_mmaped(const struct sk_buff *skb)
-{
-	return NETLINK_CB(skb).flags & NETLINK_SKB_MMAPED;
-}
-
 static bool netlink_rx_is_mmaped(struct sock *sk)
 {
 	return nlk_sk(sk)->rx_ring.pg_vec != NULL;
@@ -827,7 +844,6 @@ static void netlink_ring_set_copied(stru
 }
 
 #else /* CONFIG_NETLINK_MMAP */
-#define netlink_skb_is_mmaped(skb)	false
 #define netlink_rx_is_mmaped(sk)	false
 #define netlink_tx_is_mmaped(sk)	false
 #define netlink_mmap			sock_no_mmap
--- a/net/netlink/af_netlink.h
+++ b/net/netlink/af_netlink.h
@@ -65,6 +65,15 @@ struct nl_portid_hash {
 	u32			rnd;
 };
 
+static inline bool netlink_skb_is_mmaped(const struct sk_buff *skb)
+{
+#ifdef CONFIG_NETLINK_MMAP
+	return NETLINK_CB(skb).flags & NETLINK_SKB_MMAPED;
+#else
+	return false;
+#endif /* CONFIG_NETLINK_MMAP */
+}
+
 struct netlink_table {
 	struct nl_portid_hash	hash;
 	struct hlist_head	mc_list;

[PATCH 3.14 68/84] sctp: fix race on protocol/netns initialization

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>

[ Upstream commit 8e2d61e0aed2b7c4ecb35844fe07e0b2b762dee4 ]

Consider sctp module is unloaded and is being requested because an user
is creating a sctp socket.

During initialization, sctp will add the new protocol type and then
initialize pernet subsys:

        status = sctp_v4_protosw_init();
        if (status)
                goto err_protosw_init;

        status = sctp_v6_protosw_init();
        if (status)
                goto err_v6_protosw_init;

        status = register_pernet_subsys(&sctp_net_ops);

The problem is that after those calls to sctp_v{4,6}_protosw_init(), it
is possible for userspace to create SCTP sockets like if the module is
already fully loaded. If that happens, one of the possible effects is
that we will have readers for net->sctp.local_addr_list list earlier
than expected and sctp_net_init() does not take precautions while
dealing with that list, leading to a potential panic but not limited to
that, as sctp_sock_init() will copy a bunch of blank/partially
initialized values from net->sctp.

The race happens like this:

     CPU 0                           |  CPU 1
  socket()                           |
   __sock_create                     | socket()
    inet_create                      |  __sock_create
     list_for_each_entry_rcu(        |
        answer, &inetsw[sock->type], |
        list) {                      |   inet_create
      /* no hits */                  |
     if (unlikely(err)) {            |
      ...                            |
      request_module()               |
      /* socket creation is blocked  |
       * the module is fully loaded  |
       */                            |
       sctp_init                     |
        sctp_v4_protosw_init         |
         inet_register_protosw       |
          list_add_rcu(&p->list,     |
                       last_perm);   |
                                     |  list_for_each_entry_rcu(
                                     |     answer, &inetsw[sock->type],
        sctp_v6_protosw_init         |     list) {
                                     |     /* hit, so assumes protocol
                                     |      * is already loaded
                                     |      */
                                     |  /* socket creation continues
                                     |   * before netns is initialized
                                     |   */
        register_pernet_subsys       |

Simply inverting the initialization order between
register_pernet_subsys() and sctp_v4_protosw_init() is not possible
because register_pernet_subsys() will create a control sctp socket, so
the protocol must be already visible by then. Deferring the socket
creation to a work-queue is not good specially because we loose the
ability to handle its errors.

So, as suggested by Vlad, the fix is to split netns initialization in
two moments: defaults and control socket, so that the defaults are
already loaded by when we register the protocol, while control socket
initialization is kept at the same moment it is today.

Fixes: 4db67e808640 ("sctp: Make the address lists per network namespace")
Signed-off-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/protocol.c |   64 +++++++++++++++++++++++++++++++++-------------------
 1 file changed, 41 insertions(+), 23 deletions(-)

--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -1167,7 +1167,7 @@ static void sctp_v4_del_protocol(void)
 	unregister_inetaddr_notifier(&sctp_inetaddr_notifier);
 }
 
-static int __net_init sctp_net_init(struct net *net)
+static int __net_init sctp_defaults_init(struct net *net)
 {
 	int status;
 
@@ -1260,12 +1260,6 @@ static int __net_init sctp_net_init(stru
 
 	sctp_dbg_objcnt_init(net);
 
-	/* Initialize the control inode/socket for handling OOTB packets.  */
-	if ((status = sctp_ctl_sock_init(net))) {
-		pr_err("Failed to initialize the SCTP control sock\n");
-		goto err_ctl_sock_init;
-	}
-
 	/* Initialize the local address list. */
 	INIT_LIST_HEAD(&net->sctp.local_addr_list);
 	spin_lock_init(&net->sctp.local_addr_lock);
@@ -1281,9 +1275,6 @@ static int __net_init sctp_net_init(stru
 
 	return 0;
 
-err_ctl_sock_init:
-	sctp_dbg_objcnt_exit(net);
-	sctp_proc_exit(net);
 err_init_proc:
 	cleanup_sctp_mibs(net);
 err_init_mibs:
@@ -1292,15 +1283,12 @@ err_sysctl_register:
 	return status;
 }
 
-static void __net_exit sctp_net_exit(struct net *net)
+static void __net_exit sctp_defaults_exit(struct net *net)
 {
 	/* Free the local address list */
 	sctp_free_addr_wq(net);
 	sctp_free_local_addr_list(net);
 
-	/* Free the control endpoint.  */
-	inet_ctl_sock_destroy(net->sctp.ctl_sock);
-
 	sctp_dbg_objcnt_exit(net);
 
 	sctp_proc_exit(net);
@@ -1308,9 +1296,32 @@ static void __net_exit sctp_net_exit(str
 	sctp_sysctl_net_unregister(net);
 }
 
-static struct pernet_operations sctp_net_ops = {
-	.init = sctp_net_init,
-	.exit = sctp_net_exit,
+static struct pernet_operations sctp_defaults_ops = {
+	.init = sctp_defaults_init,
+	.exit = sctp_defaults_exit,
+};
+
+static int __net_init sctp_ctrlsock_init(struct net *net)
+{
+	int status;
+
+	/* Initialize the control inode/socket for handling OOTB packets.  */
+	status = sctp_ctl_sock_init(net);
+	if (status)
+		pr_err("Failed to initialize the SCTP control sock\n");
+
+	return status;
+}
+
+static void __net_init sctp_ctrlsock_exit(struct net *net)
+{
+	/* Free the control endpoint.  */
+	inet_ctl_sock_destroy(net->sctp.ctl_sock);
+}
+
+static struct pernet_operations sctp_ctrlsock_ops = {
+	.init = sctp_ctrlsock_init,
+	.exit = sctp_ctrlsock_exit,
 };
 
 /* Initialize the universe into something sensible.  */
@@ -1444,8 +1455,11 @@ static __init int sctp_init(void)
 	sctp_v4_pf_init();
 	sctp_v6_pf_init();
 
-	status = sctp_v4_protosw_init();
+	status = register_pernet_subsys(&sctp_defaults_ops);
+	if (status)
+		goto err_register_defaults;
 
+	status = sctp_v4_protosw_init();
 	if (status)
 		goto err_protosw_init;
 
@@ -1453,9 +1467,9 @@ static __init int sctp_init(void)
 	if (status)
 		goto err_v6_protosw_init;
 
-	status = register_pernet_subsys(&sctp_net_ops);
+	status = register_pernet_subsys(&sctp_ctrlsock_ops);
 	if (status)
-		goto err_register_pernet_subsys;
+		goto err_register_ctrlsock;
 
 	status = sctp_v4_add_protocol();
 	if (status)
@@ -1471,12 +1485,14 @@ out:
 err_v6_add_protocol:
 	sctp_v4_del_protocol();
 err_add_protocol:
-	unregister_pernet_subsys(&sctp_net_ops);
-err_register_pernet_subsys:
+	unregister_pernet_subsys(&sctp_ctrlsock_ops);
+err_register_ctrlsock:
 	sctp_v6_protosw_exit();
 err_v6_protosw_init:
 	sctp_v4_protosw_exit();
 err_protosw_init:
+	unregister_pernet_subsys(&sctp_defaults_ops);
+err_register_defaults:
 	sctp_v4_pf_exit();
 	sctp_v6_pf_exit();
 	sctp_sysctl_unregister();
@@ -1509,12 +1525,14 @@ static __exit void sctp_exit(void)
 	sctp_v6_del_protocol();
 	sctp_v4_del_protocol();
 
-	unregister_pernet_subsys(&sctp_net_ops);
+	unregister_pernet_subsys(&sctp_ctrlsock_ops);
 
 	/* Free protosw registrations */
 	sctp_v6_protosw_exit();
 	sctp_v4_protosw_exit();
 
+	unregister_pernet_subsys(&sctp_defaults_ops);
+
 	/* Unregister with socket layer. */
 	sctp_v6_pf_exit();
 	sctp_v4_pf_exit();

[PATCH 3.14 69/84] openvswitch: Zero flows on allocation.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jesse Gross <jesse@nicira.com>

[ Upstream commit ae5f2fb1d51fa128a460bcfbe3c56d7ab8bf6a43 ]

When support for megaflows was introduced, OVS needed to start
installing flows with a mask applied to them. Since masking is an
expensive operation, OVS also had an optimization that would only
take the parts of the flow keys that were covered by a non-zero
mask. The values stored in the remaining pieces should not matter
because they are masked out.

While this works fine for the purposes of matching (which must always
look at the mask), serialization to netlink can be problematic. Since
the flow and the mask are serialized separately, the uninitialized
portions of the flow can be encoded with whatever values happen to be
present.

In terms of functionality, this has little effect since these fields
will be masked out by definition. However, it leaks kernel memory to
userspace, which is a potential security vulnerability. It is also
possible that other code paths could look at the masked key and get
uninitialized data, although this does not currently appear to be an
issue in practice.

This removes the mask optimization for flows that are being installed.
This was always intended to be the case as the mask optimizations were
really targetting per-packet flow operations.

Fixes: 03f0d916 ("openvswitch: Mega flow implementation")
Signed-off-by: Jesse Gross <jesse@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/openvswitch/datapath.c   |    2 +-
 net/openvswitch/flow_table.c |   21 ++++++++++++---------
 net/openvswitch/flow_table.h |    2 +-
 3 files changed, 14 insertions(+), 11 deletions(-)

--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -803,7 +803,7 @@ static int ovs_flow_cmd_new_or_set(struc
 		if (IS_ERR(acts))
 			goto error;
 
-		ovs_flow_mask_key(&masked_key, &key, &mask);
+		ovs_flow_mask_key(&masked_key, &key, true, &mask);
 		error = ovs_nla_copy_actions(a[OVS_FLOW_ATTR_ACTIONS],
 					     &masked_key, 0, &acts);
 		if (error) {
--- a/net/openvswitch/flow_table.c
+++ b/net/openvswitch/flow_table.c
@@ -55,18 +55,21 @@ static u16 range_n_bytes(const struct sw
 }
 
 void ovs_flow_mask_key(struct sw_flow_key *dst, const struct sw_flow_key *src,
-		       const struct sw_flow_mask *mask)
+		       bool full, const struct sw_flow_mask *mask)
 {
-	const long *m = (long *)((u8 *)&mask->key + mask->range.start);
-	const long *s = (long *)((u8 *)src + mask->range.start);
-	long *d = (long *)((u8 *)dst + mask->range.start);
+	int start = full ? 0 : mask->range.start;
+	int len = full ? sizeof *dst : range_n_bytes(&mask->range);
+	const long *m = (const long *)((const u8 *)&mask->key + start);
+	const long *s = (const long *)((const u8 *)src + start);
+	long *d = (long *)((u8 *)dst + start);
 	int i;
 
-	/* The memory outside of the 'mask->range' are not set since
-	 * further operations on 'dst' only uses contents within
-	 * 'mask->range'.
+	/* If 'full' is true then all of 'dst' is fully initialized. Otherwise,
+	 * if 'full' is false the memory outside of the 'mask->range' is left
+	 * uninitialized. This can be used as an optimization when further
+	 * operations on 'dst' only use contents within 'mask->range'.
 	 */
-	for (i = 0; i < range_n_bytes(&mask->range); i += sizeof(long))
+	for (i = 0; i < len; i += sizeof(long))
 		*d++ = *s++ & *m++;
 }
 
@@ -436,7 +439,7 @@ static struct sw_flow *masked_flow_looku
 	u32 hash;
 	struct sw_flow_key masked_key;
 
-	ovs_flow_mask_key(&masked_key, unmasked, mask);
+	ovs_flow_mask_key(&masked_key, unmasked, false, mask);
 	hash = flow_hash(&masked_key, key_start, key_end);
 	head = find_bucket(ti, hash);
 	hlist_for_each_entry_rcu(flow, head, hash_node[ti->node_ver]) {
--- a/net/openvswitch/flow_table.h
+++ b/net/openvswitch/flow_table.h
@@ -79,5 +79,5 @@ bool ovs_flow_cmp_unmasked_key(const str
 			       struct sw_flow_match *match);
 
 void ovs_flow_mask_key(struct sw_flow_key *dst, const struct sw_flow_key *src,
-		       const struct sw_flow_mask *mask);
+		       bool full, const struct sw_flow_mask *mask);
 #endif /* flow_table.h */

[PATCH 3.14 70/84] fib_rules: fix fib rule dumps across multiple skbs

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wilson Kok <wkok@cumulusnetworks.com>

[ Upstream commit 41fc014332d91ee90c32840bf161f9685b7fbf2b ]

dump_rules returns skb length and not error.
But when family == AF_UNSPEC, the caller of dump_rules
assumes that it returns an error. Hence, when family == AF_UNSPEC,
we continue trying to dump on -EMSGSIZE errors resulting in
incorrect dump idx carried between skbs belonging to the same dump.
This results in fib rule dump always only dumping rules that fit
into the first skb.

This patch fixes dump_rules to return error so that we exit correctly
and idx is correctly maintained between skbs that are part of the
same dump.

Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/fib_rules.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -621,15 +621,17 @@ static int dump_rules(struct sk_buff *sk
 {
 	int idx = 0;
 	struct fib_rule *rule;
+	int err = 0;
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(rule, &ops->rules_list, list) {
 		if (idx < cb->args[1])
 			goto skip;
 
-		if (fib_nl_fill_rule(skb, rule, NETLINK_CB(cb->skb).portid,
-				     cb->nlh->nlmsg_seq, RTM_NEWRULE,
-				     NLM_F_MULTI, ops) < 0)
+		err = fib_nl_fill_rule(skb, rule, NETLINK_CB(cb->skb).portid,
+				       cb->nlh->nlmsg_seq, RTM_NEWRULE,
+				       NLM_F_MULTI, ops);
+		if (err)
 			break;
 skip:
 		idx++;
@@ -638,7 +640,7 @@ skip:
 	cb->args[1] = idx;
 	rules_ops_put(ops);
 
-	return skb->len;
+	return err;
 }
 
 static int fib_nl_dumprule(struct sk_buff *skb, struct netlink_callback *cb)
@@ -654,7 +656,9 @@ static int fib_nl_dumprule(struct sk_buf
 		if (ops == NULL)
 			return -EAFNOSUPPORT;
 
-		return dump_rules(skb, cb, ops);
+		dump_rules(skb, cb, ops);
+
+		return skb->len;
 	}
 
 	rcu_read_lock();

[PATCH 3.14 71/84] packet: missing dev_put() in packet_do_bind()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lars Westerhoff <lars.westerhoff@newtec.eu>

[ Upstream commit 158cd4af8dedbda0d612d448c724c715d0dda649 ]

When binding a PF_PACKET socket, the use count of the bound interface is
always increased with dev_hold in dev_get_by_{index,name}.  However,
when rebound with the same protocol and device as in the previous bind
the use count of the interface was not decreased.  Ultimately, this
caused the deletion of the interface to fail with the following message:

unregister_netdevice: waiting for dummy0 to become free. Usage count = 1

This patch moves the dev_put out of the conditional part that was only
executed when either the protocol or device changed on a bind.

Fixes: 902fefb82ef7 ('packet: improve socket create/bind latency in some cases')
Signed-off-by: Lars Westerhoff <lars.westerhoff@newtec.eu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/packet/af_packet.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2645,7 +2645,7 @@ static int packet_release(struct socket
 static int packet_do_bind(struct sock *sk, struct net_device *dev, __be16 proto)
 {
 	struct packet_sock *po = pkt_sk(sk);
-	const struct net_device *dev_curr;
+	struct net_device *dev_curr;
 	__be16 proto_curr;
 	bool need_rehook;
 
@@ -2669,15 +2669,13 @@ static int packet_do_bind(struct sock *s
 
 		po->num = proto;
 		po->prot_hook.type = proto;
-
-		if (po->prot_hook.dev)
-			dev_put(po->prot_hook.dev);
-
 		po->prot_hook.dev = dev;
 
 		po->ifindex = dev ? dev->ifindex : 0;
 		packet_cached_dev_assign(po, dev);
 	}
+	if (dev_curr)
+		dev_put(dev_curr);
 
 	if (proto == 0 || !need_rehook)
 		goto out_unlock;

[PATCH 3.14 72/84] rds: fix an integer overflow test in rds_info_getsockopt()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 468b732b6f76b138c0926eadf38ac88467dcd271 ]

"len" is a signed integer.  We check that len is not negative, so it
goes from zero to INT_MAX.  PAGE_SIZE is unsigned long so the comparison
is type promoted to unsigned long.  ULONG_MAX - 4095 is a higher than
INT_MAX so the condition can never be true.

I don't know if this is harmful but it seems safe to limit "len" to
INT_MAX - 4095.

Fixes: a8c879a7ee98 ('RDS: Info and stats')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/rds/info.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/rds/info.c
+++ b/net/rds/info.c
@@ -176,7 +176,7 @@ int rds_info_getsockopt(struct socket *s
 
 	/* check for all kinds of wrapping and the like */
 	start = (unsigned long)optval;
-	if (len < 0 || len + PAGE_SIZE - 1 < len || start + len < start) {
+	if (len < 0 || len > INT_MAX - PAGE_SIZE + 1 || start + len < start) {
 		ret = -EINVAL;
 		goto out;
 	}

[PATCH 3.14 74/84] bna: fix interrupts storm caused by erroneous packets

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ivan Vecera <ivecera@redhat.com>

[ Upstream commit ade4dc3e616e33c80d7e62855fe1b6f9895bc7c3 ]

The commit "e29aa33 bna: Enable Multi Buffer RX" moved packets counter
increment from the beginning of the NAPI processing loop after the check
for erroneous packets so they are never accounted. This counter is used
to inform firmware about number of processed completions (packets).
As these packets are never acked the firmware fires IRQs for them again
and again.

Fixes: e29aa33 ("bna: Enable Multi Buffer RX")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/brocade/bna/bnad.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -674,6 +674,7 @@ bnad_cq_process(struct bnad *bnad, struc
 			if (!next_cmpl->valid)
 				break;
 		}
+		packets++;
 
 		/* TODO: BNA_CQ_EF_LOCAL ? */
 		if (unlikely(flags & (BNA_CQ_EF_MAC_ERROR |
@@ -690,7 +691,6 @@ bnad_cq_process(struct bnad *bnad, struc
 		else
 			bnad_cq_setup_skb_frags(rcb, skb, sop_ci, nvecs, len);
 
-		packets++;
 		rcb->rxq->rx_packets++;
 		rcb->rxq->rx_bytes += totlen;
 		ccb->bytes_per_intr += totlen;

[PATCH 3.14 75/84] net: gso: use feature flag argument in all protocol gso handlers

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 1e16aa3ddf863c6b9f37eddf52503230a62dedb3 ]

skb_gso_segment() has a 'features' argument representing offload features
available to the output path.

A few handlers, e.g. GRE, instead re-fetch the features of skb->dev and use
those instead of the provided ones when handing encapsulation/tunnels.

Depending on dev->hw_enc_features of the output device skb_gso_segment() can
then return NULL even when the caller has disabled all GSO feature bits,
as segmentation of inner header thinks device will take care of segmentation.

This e.g. affects the tbf scheduler, which will silently drop GRE-encap GSO skbs
that did not fit the remaining token quota as the segmentation does not work
when device supports corresponding hw offload capabilities.

Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
[jay.vosburgh: backported to 3.14. ]
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/af_inet.c     |    2 +-
 net/ipv4/gre_offload.c |    2 +-
 net/ipv4/udp.c         |    2 +-
 net/ipv6/ip6_offload.c |    2 +-
 net/mpls/mpls_gso.c    |    2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1291,7 +1291,7 @@ static struct sk_buff *inet_gso_segment(
 
 	encap = SKB_GSO_CB(skb)->encap_level > 0;
 	if (encap)
-		features = skb->dev->hw_enc_features & netif_skb_features(skb);
+		features &= skb->dev->hw_enc_features;
 	SKB_GSO_CB(skb)->encap_level += ihl;
 
 	skb_reset_transport_header(skb);
--- a/net/ipv4/gre_offload.c
+++ b/net/ipv4/gre_offload.c
@@ -69,7 +69,7 @@ static struct sk_buff *gre_gso_segment(s
 	skb->mac_len = skb_inner_network_offset(skb);
 
 	/* segment inner packet. */
-	enc_features = skb->dev->hw_enc_features & netif_skb_features(skb);
+	enc_features = skb->dev->hw_enc_features & features;
 	segs = skb_mac_gso_segment(skb, enc_features);
 	if (!segs || IS_ERR(segs)) {
 		skb_gso_error_unwind(skb, protocol, ghl, mac_offset, mac_len);
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2517,7 +2517,7 @@ struct sk_buff *skb_udp_tunnel_segment(s
 	skb->protocol = htons(ETH_P_TEB);
 
 	/* segment inner packet. */
-	enc_features = skb->dev->hw_enc_features & netif_skb_features(skb);
+	enc_features = skb->dev->hw_enc_features & features;
 	segs = skb_mac_gso_segment(skb, enc_features);
 	if (!segs || IS_ERR(segs)) {
 		skb_gso_error_unwind(skb, protocol, tnl_hlen, mac_offset,
--- a/net/ipv6/ip6_offload.c
+++ b/net/ipv6/ip6_offload.c
@@ -112,7 +112,7 @@ static struct sk_buff *ipv6_gso_segment(
 
 	encap = SKB_GSO_CB(skb)->encap_level > 0;
 	if (encap)
-		features = skb->dev->hw_enc_features & netif_skb_features(skb);
+		features &= skb->dev->hw_enc_features;
 	SKB_GSO_CB(skb)->encap_level += sizeof(*ipv6h);
 
 	ipv6h = ipv6_hdr(skb);
--- a/net/mpls/mpls_gso.c
+++ b/net/mpls/mpls_gso.c
@@ -47,7 +47,7 @@ static struct sk_buff *mpls_gso_segment(
 	__skb_push(skb, skb->mac_len);
 
 	/* Segment inner packet. */
-	mpls_features = skb->dev->mpls_features & netif_skb_features(skb);
+	mpls_features = skb->dev->mpls_features & features;
 	segs = skb_mac_gso_segment(skb, mpls_features);
 
 

[PATCH 3.14 76/84] Revert "iio: bmg160: IIO_BUFFER and IIO_TRIGGERED_BUFFER are required"

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

This reverts commit 279c039ca63acbd69e69d6d7ddfed50346fb2185 which was
commit 06d2f6ca5a38abe92f1f3a132b331eee773868c3 upstream as it should
not have been applied.


Reported-by: Luis Henriques <luis.henriques@canonical.com>
Cc: Markus Pargmann <mpa@pengutronix.de>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/gyro/Kconfig |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -93,8 +93,7 @@ config IIO_ST_GYRO_SPI_3AXIS
 config ITG3200
 	tristate "InvenSense ITG3200 Digital 3-Axis Gyroscope I2C driver"
 	depends on I2C
-	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
+	select IIO_TRIGGERED_BUFFER if IIO_BUFFER
 	help
 	  Say yes here to add support for the InvenSense ITG3200 digital
 	  3-axis gyroscope sensor.

[PATCH 3.14 77/84] x86/nmi: Enable nested do_nmi() handling for 64-bit kernels

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 9d05041679904b12c12421cbcf9cb5f4860a8d7b upstream.

32-bit kernels handle nested NMIs in C.  Enable the exact same
handling on 64-bit kernels as well.  This isn't currently
necessary, but it will become necessary once the asm code starts
allowing limited nesting.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/nmi.c |  125 +++++++++++++++++++++-----------------------------
 1 file changed, 53 insertions(+), 72 deletions(-)

--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -392,15 +392,15 @@ static __kprobes void default_do_nmi(str
 }
 
 /*
- * NMIs can hit breakpoints which will cause it to lose its
- * NMI context with the CPU when the breakpoint does an iret.
- */
-#ifdef CONFIG_X86_32
-/*
- * For i386, NMIs use the same stack as the kernel, and we can
- * add a workaround to the iret problem in C (preventing nested
- * NMIs if an NMI takes a trap). Simply have 3 states the NMI
- * can be in:
+ * NMIs can hit breakpoints which will cause it to lose its NMI context
+ * with the CPU when the breakpoint or page fault does an IRET.
+ *
+ * As a result, NMIs can nest if NMIs get unmasked due an IRET during
+ * NMI processing.  On x86_64, the asm glue protects us from nested NMIs
+ * if the outer NMI came from kernel mode, but we can still nest if the
+ * outer NMI came from user mode.
+ *
+ * To handle these nested NMIs, we have three states:
  *
  *  1) not running
  *  2) executing
@@ -414,15 +414,14 @@ static __kprobes void default_do_nmi(str
  * (Note, the latch is binary, thus multiple NMIs triggering,
  *  when one is running, are ignored. Only one NMI is restarted.)
  *
- * If an NMI hits a breakpoint that executes an iret, another
- * NMI can preempt it. We do not want to allow this new NMI
- * to run, but we want to execute it when the first one finishes.
- * We set the state to "latched", and the exit of the first NMI will
- * perform a dec_return, if the result is zero (NOT_RUNNING), then
- * it will simply exit the NMI handler. If not, the dec_return
- * would have set the state to NMI_EXECUTING (what we want it to
- * be when we are running). In this case, we simply jump back
- * to rerun the NMI handler again, and restart the 'latched' NMI.
+ * If an NMI executes an iret, another NMI can preempt it. We do not
+ * want to allow this new NMI to run, but we want to execute it when the
+ * first one finishes.  We set the state to "latched", and the exit of
+ * the first NMI will perform a dec_return, if the result is zero
+ * (NOT_RUNNING), then it will simply exit the NMI handler. If not, the
+ * dec_return would have set the state to NMI_EXECUTING (what we want it
+ * to be when we are running). In this case, we simply jump back to
+ * rerun the NMI handler again, and restart the 'latched' NMI.
  *
  * No trap (breakpoint or page fault) should be hit before nmi_restart,
  * thus there is no race between the first check of state for NOT_RUNNING
@@ -445,49 +444,36 @@ enum nmi_states {
 static DEFINE_PER_CPU(enum nmi_states, nmi_state);
 static DEFINE_PER_CPU(unsigned long, nmi_cr2);
 
-#define nmi_nesting_preprocess(regs)					\
-	do {								\
-		if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) {	\
-			this_cpu_write(nmi_state, NMI_LATCHED);		\
-			return;						\
-		}							\
-		this_cpu_write(nmi_state, NMI_EXECUTING);		\
-		this_cpu_write(nmi_cr2, read_cr2());			\
-	} while (0);							\
-	nmi_restart:
-
-#define nmi_nesting_postprocess()					\
-	do {								\
-		if (unlikely(this_cpu_read(nmi_cr2) != read_cr2()))	\
-			write_cr2(this_cpu_read(nmi_cr2));		\
-		if (this_cpu_dec_return(nmi_state))			\
-			goto nmi_restart;				\
-	} while (0)
-#else /* x86_64 */
+#ifdef CONFIG_X86_64
 /*
- * In x86_64 things are a bit more difficult. This has the same problem
- * where an NMI hitting a breakpoint that calls iret will remove the
- * NMI context, allowing a nested NMI to enter. What makes this more
- * difficult is that both NMIs and breakpoints have their own stack.
- * When a new NMI or breakpoint is executed, the stack is set to a fixed
- * point. If an NMI is nested, it will have its stack set at that same
- * fixed address that the first NMI had, and will start corrupting the
- * stack. This is handled in entry_64.S, but the same problem exists with
- * the breakpoint stack.
- *
- * If a breakpoint is being processed, and the debug stack is being used,
- * if an NMI comes in and also hits a breakpoint, the stack pointer
- * will be set to the same fixed address as the breakpoint that was
- * interrupted, causing that stack to be corrupted. To handle this case,
- * check if the stack that was interrupted is the debug stack, and if
- * so, change the IDT so that new breakpoints will use the current stack
- * and not switch to the fixed address. On return of the NMI, switch back
- * to the original IDT.
+ * In x86_64, we need to handle breakpoint -> NMI -> breakpoint.  Without
+ * some care, the inner breakpoint will clobber the outer breakpoint's
+ * stack.
+ *
+ * If a breakpoint is being processed, and the debug stack is being
+ * used, if an NMI comes in and also hits a breakpoint, the stack
+ * pointer will be set to the same fixed address as the breakpoint that
+ * was interrupted, causing that stack to be corrupted. To handle this
+ * case, check if the stack that was interrupted is the debug stack, and
+ * if so, change the IDT so that new breakpoints will use the current
+ * stack and not switch to the fixed address. On return of the NMI,
+ * switch back to the original IDT.
  */
 static DEFINE_PER_CPU(int, update_debug_stack);
+#endif
 
-static inline void nmi_nesting_preprocess(struct pt_regs *regs)
+dotraplinkage notrace void
+do_nmi(struct pt_regs *regs, long error_code)
 {
+	if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) {
+		this_cpu_write(nmi_state, NMI_LATCHED);
+		return;
+	}
+	this_cpu_write(nmi_state, NMI_EXECUTING);
+	this_cpu_write(nmi_cr2, read_cr2());
+nmi_restart:
+
+#ifdef CONFIG_X86_64
 	/*
 	 * If we interrupted a breakpoint, it is possible that
 	 * the nmi handler will have breakpoints too. We need to
@@ -498,22 +484,8 @@ static inline void nmi_nesting_preproces
 		debug_stack_set_zero();
 		this_cpu_write(update_debug_stack, 1);
 	}
-}
-
-static inline void nmi_nesting_postprocess(void)
-{
-	if (unlikely(this_cpu_read(update_debug_stack))) {
-		debug_stack_reset();
-		this_cpu_write(update_debug_stack, 0);
-	}
-}
 #endif
 
-dotraplinkage notrace __kprobes void
-do_nmi(struct pt_regs *regs, long error_code)
-{
-	nmi_nesting_preprocess(regs);
-
 	nmi_enter();
 
 	inc_irq_stat(__nmi_count);
@@ -523,8 +495,17 @@ do_nmi(struct pt_regs *regs, long error_
 
 	nmi_exit();
 
-	/* On i386, may loop back to preprocess */
-	nmi_nesting_postprocess();
+#ifdef CONFIG_X86_64
+	if (unlikely(this_cpu_read(update_debug_stack))) {
+		debug_stack_reset();
+		this_cpu_write(update_debug_stack, 0);
+	}
+#endif
+
+	if (unlikely(this_cpu_read(nmi_cr2) != read_cr2()))
+		write_cr2(this_cpu_read(nmi_cr2));
+	if (this_cpu_dec_return(nmi_state))
+		goto nmi_restart;
 }
 
 void stop_nmi(void)

[PATCH 3.14 78/84] x86/nmi/64: Remove asm code that saves CR2

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 0e181bb58143cb4a2e8f01c281b0816cd0e4798e upstream.

Now that do_nmi saves CR2, we don't need to save it in asm.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 arch/x86/kernel/entry_64.S |   18 ------------------
 1 file changed, 18 deletions(-)

--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1885,28 +1885,10 @@ end_repeat_nmi:
 	call save_paranoid
 	DEFAULT_FRAME 0
 
-	/*
-	 * Save off the CR2 register. If we take a page fault in the NMI then
-	 * it could corrupt the CR2 value. If the NMI preempts a page fault
-	 * handler before it was able to read the CR2 register, and then the
-	 * NMI itself takes a page fault, the page fault that was preempted
-	 * will read the information from the NMI page fault and not the
-	 * origin fault. Save it off and restore it if it changes.
-	 * Use the r12 callee-saved register.
-	 */
-	movq %cr2, %r12
-
 	/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
 	movq %rsp,%rdi
 	movq $-1,%rsi
 	call do_nmi
-
-	/* Did the NMI take a page fault? Restore cr2 if it did */
-	movq %cr2, %rcx
-	cmpq %rcx, %r12
-	je 1f
-	movq %r12, %cr2
-1:
 	
 	testl %ebx,%ebx				/* swapgs needed? */
 	jnz nmi_restore

[PATCH 3.14 79/84] x86/nmi/64: Switch stacks on userspace NMI entry

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 9b6e6a8334d56354853f9c255d1395c2ba570e0a upstream.

Returning to userspace is tricky: IRET can fail, and ESPFIX can
rearrange the stack prior to IRET.

The NMI nesting fixup relies on a precise stack layout and
atomic IRET.  Rather than trying to teach the NMI nesting fixup
to handle ESPFIX and failed IRET, punt: run NMIs that came from
user mode on the normal kernel stack.

This will make some nested NMIs visible to C code, but the C
code is okay with that.

As a side effect, this should speed up perf: it eliminates an
RDMSR when NMIs come from user mode.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/entry_64.S |   77 ++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 73 insertions(+), 4 deletions(-)

--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1715,19 +1715,88 @@ ENTRY(nmi)
 	 * a nested NMI that updated the copy interrupt stack frame, a
 	 * jump will be made to the repeat_nmi code that will handle the second
 	 * NMI.
+	 *
+	 * However, espfix prevents us from directly returning to userspace
+	 * with a single IRET instruction.  Similarly, IRET to user mode
+	 * can fault.  We therefore handle NMIs from user space like
+	 * other IST entries.
 	 */
 
 	/* Use %rdx as out temp variable throughout */
 	pushq_cfi %rdx
 	CFI_REL_OFFSET rdx, 0
 
+	testb	$3, CS-RIP+8(%rsp)
+	jz	.Lnmi_from_kernel
+
+	/*
+	 * NMI from user mode.  We need to run on the thread stack, but we
+	 * can't go through the normal entry paths: NMIs are masked, and
+	 * we don't want to enable interrupts, because then we'll end
+	 * up in an awkward situation in which IRQs are on but NMIs
+	 * are off.
+	 */
+	SWAPGS
+	cld
+	movq	%rsp, %rdx
+	movq	PER_CPU_VAR(kernel_stack), %rsp
+	addq	$KERNEL_STACK_OFFSET, %rsp
+	pushq	5*8(%rdx)	/* pt_regs->ss */
+	pushq	4*8(%rdx)	/* pt_regs->rsp */
+	pushq	3*8(%rdx)	/* pt_regs->flags */
+	pushq	2*8(%rdx)	/* pt_regs->cs */
+	pushq	1*8(%rdx)	/* pt_regs->rip */
+	pushq   $-1		/* pt_regs->orig_ax */
+	pushq   %rdi		/* pt_regs->di */
+	pushq   %rsi		/* pt_regs->si */
+	pushq   (%rdx)		/* pt_regs->dx */
+	pushq   %rcx		/* pt_regs->cx */
+	pushq   %rax		/* pt_regs->ax */
+	pushq   %r8		/* pt_regs->r8 */
+	pushq   %r9		/* pt_regs->r9 */
+	pushq   %r10		/* pt_regs->r10 */
+	pushq   %r11		/* pt_regs->r11 */
+	pushq	%rbx		/* pt_regs->rbx */
+	pushq	%rbp		/* pt_regs->rbp */
+	pushq	%r12		/* pt_regs->r12 */
+	pushq	%r13		/* pt_regs->r13 */
+	pushq	%r14		/* pt_regs->r14 */
+	pushq	%r15		/* pt_regs->r15 */
+
+	/*
+	 * At this point we no longer need to worry about stack damage
+	 * due to nesting -- we're on the normal thread stack and we're
+	 * done with the NMI stack.
+	 */
+	movq	%rsp, %rdi
+	movq	$-1, %rsi
+	call	do_nmi
+
+	/*
+	 * Return back to user mode.  We must *not* do the normal exit
+	 * work, because we don't want to enable interrupts.  Fortunately,
+	 * do_nmi doesn't modify pt_regs.
+	 */
+	SWAPGS
+
 	/*
-	 * If %cs was not the kernel segment, then the NMI triggered in user
-	 * space, which means it is definitely not nested.
+	 * Open-code the entire return process for compatibility with varying
+	 * register layouts across different kernel versions.
 	 */
-	cmpl $__KERNEL_CS, 16(%rsp)
-	jne first_nmi
+	addq	$6*8, %rsp	/* skip bx, bp, and r12-r15 */
+	popq	%r11		/* pt_regs->r11 */
+	popq	%r10		/* pt_regs->r10 */
+	popq	%r9		/* pt_regs->r9 */
+	popq	%r8		/* pt_regs->r8 */
+	popq	%rax		/* pt_regs->ax */
+	popq	%rcx		/* pt_regs->cx */
+	popq	%rdx		/* pt_regs->dx */
+	popq	%rsi		/* pt_regs->si */
+	popq	%rdi		/* pt_regs->di */
+	addq	$8, %rsp	/* skip orig_ax */
+	INTERRUPT_RETURN
 
+.Lnmi_from_kernel:
 	/*
 	 * Check the special variable on the stack to see if NMIs are
 	 * executing.

Re: [PATCH 3.14 79/84] x86/nmi/64: Switch stacks on userspace NMI entry

[Andy Lutomirski]

On Tue, Sep 29, 2015 at 8:19 AM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> 3.14-stable review patch.  If anyone has any objections, please let me know.
>
> ------------------
>
> From: Andy Lutomirski <luto@kernel.org>
>
> commit 9b6e6a8334d56354853f9c255d1395c2ba570e0a upstream.
>
> Returning to userspace is tricky: IRET can fail, and ESPFIX can
> rearrange the stack prior to IRET.

Just a heads up: under very strange circumstances (most likely
requires booting with paravirt-noreplace, which is hopefully only used
by Sasha), this causes a regression that's fixed by
83c133cf11fb0e68a51681447e372489f052d40e.  I'm not 100% sure that the
regression is observable at all, because the same strange
configuration may also hit the bug fixed by
fc57a7c68020dcf954428869eafd934c0ab1536f before the regression can
trigger.

Anyway, you've been warned.  I wouldn't worry too much about it, though.

--Andy

Re: [PATCH 3.14 79/84] x86/nmi/64: Switch stacks on userspace NMI entry

[Greg Kroah-Hartman]

On Tue, Sep 29, 2015 at 10:25:52AM -0700, Andy Lutomirski wrote:
> On Tue, Sep 29, 2015 at 8:19 AM, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> > 3.14-stable review patch.  If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Andy Lutomirski <luto@kernel.org>
> >
> > commit 9b6e6a8334d56354853f9c255d1395c2ba570e0a upstream.
> >
> > Returning to userspace is tricky: IRET can fail, and ESPFIX can
> > rearrange the stack prior to IRET.
> 
> Just a heads up: under very strange circumstances (most likely
> requires booting with paravirt-noreplace, which is hopefully only used
> by Sasha), this causes a regression that's fixed by
> 83c133cf11fb0e68a51681447e372489f052d40e.  I'm not 100% sure that the
> regression is observable at all, because the same strange
> configuration may also hit the bug fixed by
> fc57a7c68020dcf954428869eafd934c0ab1536f before the regression can
> trigger.
> 
> Anyway, you've been warned.  I wouldn't worry too much about it, though.

Thanks, that patch is still in my queue for future stable kernels, so it
should trickle down soon.

thanks,

greg k-h

[PATCH 3.14 80/84] x86/nmi/64: Improve nested NMI comments

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 0b22930ebad563ae97ff3f8d7b9f12060b4c6e6b upstream.

I found the nested NMI documentation to be difficult to follow.
Improve the comments.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/entry_64.S |  159 +++++++++++++++++++++++++--------------------
 arch/x86/kernel/nmi.c      |    4 -
 2 files changed, 93 insertions(+), 70 deletions(-)

--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1702,11 +1702,12 @@ ENTRY(nmi)
 	 *  If the variable is not set and the stack is not the NMI
 	 *  stack then:
 	 *    o Set the special variable on the stack
-	 *    o Copy the interrupt frame into a "saved" location on the stack
-	 *    o Copy the interrupt frame into a "copy" location on the stack
+	 *    o Copy the interrupt frame into an "outermost" location on the
+	 *      stack
+	 *    o Copy the interrupt frame into an "iret" location on the stack
 	 *    o Continue processing the NMI
 	 *  If the variable is set or the previous stack is the NMI stack:
-	 *    o Modify the "copy" location to jump to the repeate_nmi
+	 *    o Modify the "iret" location to jump to the repeat_nmi
 	 *    o return back to the first NMI
 	 *
 	 * Now on exit of the first NMI, we first clear the stack variable
@@ -1798,18 +1799,60 @@ ENTRY(nmi)
 
 .Lnmi_from_kernel:
 	/*
-	 * Check the special variable on the stack to see if NMIs are
-	 * executing.
+	 * Here's what our stack frame will look like:
+	 * +---------------------------------------------------------+
+	 * | original SS                                             |
+	 * | original Return RSP                                     |
+	 * | original RFLAGS                                         |
+	 * | original CS                                             |
+	 * | original RIP                                            |
+	 * +---------------------------------------------------------+
+	 * | temp storage for rdx                                    |
+	 * +---------------------------------------------------------+
+	 * | "NMI executing" variable                                |
+	 * +---------------------------------------------------------+
+	 * | iret SS          } Copied from "outermost" frame        |
+	 * | iret Return RSP  } on each loop iteration; overwritten  |
+	 * | iret RFLAGS      } by a nested NMI to force another     |
+	 * | iret CS          } iteration if needed.                 |
+	 * | iret RIP         }                                      |
+	 * +---------------------------------------------------------+
+	 * | outermost SS          } initialized in first_nmi;       |
+	 * | outermost Return RSP  } will not be changed before      |
+	 * | outermost RFLAGS      } NMI processing is done.         |
+	 * | outermost CS          } Copied to "iret" frame on each  |
+	 * | outermost RIP         } iteration.                      |
+	 * +---------------------------------------------------------+
+	 * | pt_regs                                                 |
+	 * +---------------------------------------------------------+
+	 *
+	 * The "original" frame is used by hardware.  Before re-enabling
+	 * NMIs, we need to be done with it, and we need to leave enough
+	 * space for the asm code here.
+	 *
+	 * We return by executing IRET while RSP points to the "iret" frame.
+	 * That will either return for real or it will loop back into NMI
+	 * processing.
+	 *
+	 * The "outermost" frame is copied to the "iret" frame on each
+	 * iteration of the loop, so each iteration starts with the "iret"
+	 * frame pointing to the final return target.
+	 */
+
+	/*
+	 * Determine whether we're a nested NMI.
+	 *
+	 * First check "NMI executing".  If it's set, then we're nested.
+	 * This will not detect if we interrupted an outer NMI just
+	 * before IRET.
 	 */
 	cmpl $1, -8(%rsp)
 	je nested_nmi
 
 	/*
-	 * Now test if the previous stack was an NMI stack.
-	 * We need the double check. We check the NMI stack to satisfy the
-	 * race when the first NMI clears the variable before returning.
-	 * We check the variable because the first NMI could be in a
-	 * breakpoint routine using a breakpoint stack.
+	 * Now test if the previous stack was an NMI stack.  This covers
+	 * the case where we interrupt an outer NMI after it clears
+	 * "NMI executing" but before IRET.
 	 */
 	lea 6*8(%rsp), %rdx
 	test_in_nmi rdx, 4*8(%rsp), nested_nmi, first_nmi
@@ -1817,9 +1860,11 @@ ENTRY(nmi)
 
 nested_nmi:
 	/*
-	 * Do nothing if we interrupted the fixup in repeat_nmi.
-	 * It's about to repeat the NMI handler, so we are fine
-	 * with ignoring this one.
+	 * If we interrupted an NMI that is between repeat_nmi and
+	 * end_repeat_nmi, then we must not modify the "iret" frame
+	 * because it's being written by the outer NMI.  That's okay;
+	 * the outer NMI handler is about to call do_nmi anyway,
+	 * so we can just resume the outer NMI.
 	 */
 	movq $repeat_nmi, %rdx
 	cmpq 8(%rsp), %rdx
@@ -1829,7 +1874,10 @@ nested_nmi:
 	ja nested_nmi_out
 
 1:
-	/* Set up the interrupted NMIs stack to jump to repeat_nmi */
+	/*
+	 * Modify the "iret" frame to point to repeat_nmi, forcing another
+	 * iteration of NMI handling.
+	 */
 	leaq -1*8(%rsp), %rdx
 	movq %rdx, %rsp
 	CFI_ADJUST_CFA_OFFSET 1*8
@@ -1848,60 +1896,23 @@ nested_nmi_out:
 	popq_cfi %rdx
 	CFI_RESTORE rdx
 
-	/* No need to check faults here */
+	/* We are returning to kernel mode, so this cannot result in a fault. */
 	INTERRUPT_RETURN
 
 	CFI_RESTORE_STATE
 first_nmi:
-	/*
-	 * Because nested NMIs will use the pushed location that we
-	 * stored in rdx, we must keep that space available.
-	 * Here's what our stack frame will look like:
-	 * +-------------------------+
-	 * | original SS             |
-	 * | original Return RSP     |
-	 * | original RFLAGS         |
-	 * | original CS             |
-	 * | original RIP            |
-	 * +-------------------------+
-	 * | temp storage for rdx    |
-	 * +-------------------------+
-	 * | NMI executing variable  |
-	 * +-------------------------+
-	 * | copied SS               |
-	 * | copied Return RSP       |
-	 * | copied RFLAGS           |
-	 * | copied CS               |
-	 * | copied RIP              |
-	 * +-------------------------+
-	 * | Saved SS                |
-	 * | Saved Return RSP        |
-	 * | Saved RFLAGS            |
-	 * | Saved CS                |
-	 * | Saved RIP               |
-	 * +-------------------------+
-	 * | pt_regs                 |
-	 * +-------------------------+
-	 *
-	 * The saved stack frame is used to fix up the copied stack frame
-	 * that a nested NMI may change to make the interrupted NMI iret jump
-	 * to the repeat_nmi. The original stack frame and the temp storage
-	 * is also used by nested NMIs and can not be trusted on exit.
-	 */
-	/* Do not pop rdx, nested NMIs will corrupt that part of the stack */
+	/* Restore rdx. */
 	movq (%rsp), %rdx
 	CFI_RESTORE rdx
 
-	/* Set the NMI executing variable on the stack. */
+	/* Set "NMI executing" on the stack. */
 	pushq_cfi $1
 
-	/*
-	 * Leave room for the "copied" frame
-	 */
+	/* Leave room for the "iret" frame */
 	subq $(5*8), %rsp
 	CFI_ADJUST_CFA_OFFSET 5*8
 
-	/* Copy the stack frame to the Saved frame */
+	/* Copy the "original" frame to the "outermost" frame */
 	.rept 5
 	pushq_cfi 11*8(%rsp)
 	.endr
@@ -1909,6 +1920,7 @@ first_nmi:
 
 	/* Everything up to here is safe from nested NMIs */
 
+repeat_nmi:
 	/*
 	 * If there was a nested NMI, the first NMI's iret will return
 	 * here. But NMIs are still enabled and we can take another
@@ -1917,16 +1929,21 @@ first_nmi:
 	 * it will just return, as we are about to repeat an NMI anyway.
 	 * This makes it safe to copy to the stack frame that a nested
 	 * NMI will update.
-	 */
-repeat_nmi:
-	/*
-	 * Update the stack variable to say we are still in NMI (the update
-	 * is benign for the non-repeat case, where 1 was pushed just above
-	 * to this very stack slot).
+	 *
+	 * RSP is pointing to "outermost RIP".  gsbase is unknown, but, if
+	 * we're repeating an NMI, gsbase has the same value that it had on
+	 * the first iteration.  paranoid_entry will load the kernel
+	 * gsbase if needed before we call do_nmi.
+	 *
+	 * Set "NMI executing" in case we came back here via IRET.
 	 */
 	movq $1, 10*8(%rsp)
 
-	/* Make another copy, this one may be modified by nested NMIs */
+	/*
+	 * Copy the "outermost" frame to the "iret" frame.  NMIs that nest
+	 * here must not modify the "iret" frame while we're writing to
+	 * it or it will end up containing garbage.
+	 */
 	addq $(10*8), %rsp
 	CFI_ADJUST_CFA_OFFSET -10*8
 	.rept 5
@@ -1937,9 +1954,9 @@ repeat_nmi:
 end_repeat_nmi:
 
 	/*
-	 * Everything below this point can be preempted by a nested
-	 * NMI if the first NMI took an exception and reset our iret stack
-	 * so that we repeat another NMI.
+	 * Everything below this point can be preempted by a nested NMI.
+	 * If this happens, then the inner NMI will change the "iret"
+	 * frame to point back to repeat_nmi.
 	 */
 	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
 	subq $ORIG_RAX-R15, %rsp
@@ -1967,9 +1984,15 @@ nmi_restore:
 	/* Pop the extra iret frame at once */
 	RESTORE_ALL 6*8
 
-	/* Clear the NMI executing stack variable */
+	/* Clear "NMI executing". */
 	movq $0, 5*8(%rsp)
-	jmp irq_return
+
+	/*
+	 * INTERRUPT_RETURN reads the "iret" frame and exits the NMI
+	 * stack in a single instruction.  We are returning to kernel
+	 * mode, so this cannot result in a fault.
+	 */
+	INTERRUPT_RETURN
 	CFI_ENDPROC
 END(nmi)
 
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -392,8 +392,8 @@ static __kprobes void default_do_nmi(str
 }
 
 /*
- * NMIs can hit breakpoints which will cause it to lose its NMI context
- * with the CPU when the breakpoint or page fault does an IRET.
+ * NMIs can page fault or hit breakpoints which will cause it to lose
+ * its NMI context with the CPU when the breakpoint or page fault does an IRET.
  *
  * As a result, NMIs can nest if NMIs get unmasked due an IRET during
  * NMI processing.  On x86_64, the asm glue protects us from nested NMIs

[PATCH 3.14 81/84] x86/nmi/64: Reorder nested NMI checks

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit a27507ca2d796cfa8d907de31ad730359c8a6d06 upstream.

Check the repeat_nmi .. end_repeat_nmi special case first.  The
next patch will rework the RSP check and, as a side effect, the
RSP check will no longer detect repeat_nmi .. end_repeat_nmi, so
we'll need this ordering of the checks.

Note: this is more subtle than it appears.  The check for
repeat_nmi .. end_repeat_nmi jumps straight out of the NMI code
instead of adjusting the "iret" frame to force a repeat.  This
is necessary, because the code between repeat_nmi and
end_repeat_nmi sets "NMI executing" and then writes to the
"iret" frame itself.  If a nested NMI comes in and modifies the
"iret" frame while repeat_nmi is also modifying it, we'll end up
with garbage.  The old code got this right, as does the new
code, but the new code is a bit more explicit.

If we were to move the check right after the "NMI executing"
check, then we'd get it wrong and have random crashes.

( Because the "NMI executing" check would jump to the code that would
  modify the "iret" frame without checking if the interrupted NMI was
  currently modifying it. )

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/entry_64.S |   33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1842,7 +1842,23 @@ ENTRY(nmi)
 	/*
 	 * Determine whether we're a nested NMI.
 	 *
-	 * First check "NMI executing".  If it's set, then we're nested.
+	 * If we interrupted kernel code between repeat_nmi and
+	 * end_repeat_nmi, then we are a nested NMI.  We must not
+	 * modify the "iret" frame because it's being written by
+	 * the outer NMI.  That's okay; the outer NMI handler is
+	 * about to about to call do_nmi anyway, so we can just
+	 * resume the outer NMI.
+	 */
+	movq	$repeat_nmi, %rdx
+	cmpq	8(%rsp), %rdx
+	ja	1f
+	movq	$end_repeat_nmi, %rdx
+	cmpq	8(%rsp), %rdx
+	ja	nested_nmi_out
+1:
+
+	/*
+	 * Now check "NMI executing".  If it's set, then we're nested.
 	 * This will not detect if we interrupted an outer NMI just
 	 * before IRET.
 	 */
@@ -1860,21 +1876,6 @@ ENTRY(nmi)
 
 nested_nmi:
 	/*
-	 * If we interrupted an NMI that is between repeat_nmi and
-	 * end_repeat_nmi, then we must not modify the "iret" frame
-	 * because it's being written by the outer NMI.  That's okay;
-	 * the outer NMI handler is about to call do_nmi anyway,
-	 * so we can just resume the outer NMI.
-	 */
-	movq $repeat_nmi, %rdx
-	cmpq 8(%rsp), %rdx
-	ja 1f
-	movq $end_repeat_nmi, %rdx
-	cmpq 8(%rsp), %rdx
-	ja nested_nmi_out
-
-1:
-	/*
 	 * Modify the "iret" frame to point to repeat_nmi, forcing another
 	 * iteration of NMI handling.
 	 */

[PATCH 3.14 82/84] x86/nmi/64: Use DF to avoid userspace RSP confusing nested NMI detection

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 810bc075f78ff2c221536eb3008eac6a492dba2d upstream.

We have a tricky bug in the nested NMI code: if we see RSP
pointing to the NMI stack on NMI entry from kernel mode, we
assume that we are executing a nested NMI.

This isn't quite true.  A malicious userspace program can point
RSP at the NMI stack, issue SYSCALL, and arrange for an NMI to
happen while RSP is still pointing at the NMI stack.

Fix it with a sneaky trick.  Set DF in the region of code that
the RSP check is intended to detect.  IRET will clear DF
atomically.

( Note: other than paravirt, there's little need for all this
  complexity. We could check RIP instead of RSP. )

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 arch/x86/kernel/entry_64.S |   29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1868,10 +1868,25 @@ ENTRY(nmi)
 	/*
 	 * Now test if the previous stack was an NMI stack.  This covers
 	 * the case where we interrupt an outer NMI after it clears
-	 * "NMI executing" but before IRET.
+	 * "NMI executing" but before IRET.  We need to be careful, though:
+	 * there is one case in which RSP could point to the NMI stack
+	 * despite there being no NMI active: naughty userspace controls
+	 * RSP at the very beginning of the SYSCALL targets.  We can
+	 * pull a fast one on naughty userspace, though: we program
+	 * SYSCALL to mask DF, so userspace cannot cause DF to be set
+	 * if it controls the kernel's RSP.  We set DF before we clear
+	 * "NMI executing".
 	 */
 	lea 6*8(%rsp), %rdx
 	test_in_nmi rdx, 4*8(%rsp), nested_nmi, first_nmi
+
+	/* Ah, it is within the NMI stack. */
+
+	testb	$(X86_EFLAGS_DF >> 8), (3*8 + 1)(%rsp)
+	jz	first_nmi	/* RSP was user controlled. */
+
+	/* This is a nested NMI. */
+
 	CFI_REMEMBER_STATE
 
 nested_nmi:
@@ -1985,8 +2000,16 @@ nmi_restore:
 	/* Pop the extra iret frame at once */
 	RESTORE_ALL 6*8
 
-	/* Clear "NMI executing". */
-	movq $0, 5*8(%rsp)
+	/*
+	 * Clear "NMI executing".  Set DF first so that we can easily
+	 * distinguish the remaining code between here and IRET from
+	 * the SYSCALL entry and exit paths.  On a native kernel, we
+	 * could just inspect RIP, but, on paravirt kernels,
+	 * INTERRUPT_RETURN can translate into a jump into a
+	 * hypercall page.
+	 */
+	std
+	movq	$0, 5*8(%rsp)		/* clear "NMI executing" */
 
 	/*
 	 * INTERRUPT_RETURN reads the "iret" frame and exits the NMI

[PATCH 3.14 83/84] udf: Check length of extended attributes and allocation descriptors

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 23b133bdc452aa441fcb9b82cbf6dd05cfd342d0 upstream.

Check length of extended attributes and allocation descriptors when
loading inodes from disk. Otherwise corrupted filesystems could confuse
the code and make the kernel oops.

This fixes CVE-2015-4167.

Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no>
Signed-off-by: Jan Kara <jack@suse.cz>
[Use make_bad_inode() instead of branching due to older implementation.]
Signed-off-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/udf/inode.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -1496,6 +1496,22 @@ static void udf_fill_inode(struct inode
 		iinfo->i_checkpoint = le32_to_cpu(efe->checkpoint);
 	}
 
+	/*
+	 * Sanity check length of allocation descriptors and extended attrs to
+	 * avoid integer overflows
+	 */
+	if (iinfo->i_lenEAttr > inode->i_sb->s_blocksize
+			|| iinfo->i_lenAlloc > inode->i_sb->s_blocksize) {
+		make_bad_inode(inode);
+		return;
+	}
+	/* Now do exact checks */
+	if (udf_file_entry_alloc_offset(inode)
+			+ iinfo->i_lenAlloc > inode->i_sb->s_blocksize) {
+		make_bad_inode(inode);
+		return;
+	}
+
 	switch (fe->icbTag.fileType) {
 	case ICBTAG_FILE_TYPE_DIRECTORY:
 		inode->i_op = &udf_dir_inode_operations;

[PATCH 3.14 84/84] NVMe: Initialize device reference count earlier

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Keith Busch <keith.busch@intel.com>

commit fb35e914b3f88cda9ee6f9d776910c35269c4ecf upstream.

If an NVMe device becomes ready but fails to create IO queues, the driver
creates a character device handle so the device can be managed. The
device reference count needs to be initialized before creating the
character device.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/nvme-core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/block/nvme-core.c
+++ b/drivers/block/nvme-core.c
@@ -2464,6 +2464,7 @@ static int nvme_probe(struct pci_dev *pd
 	if (result)
 		goto release;
 
+	kref_init(&dev->kref);
 	result = nvme_dev_start(dev);
 	if (result) {
 		if (result == -EBUSY)
@@ -2471,7 +2472,6 @@ static int nvme_probe(struct pci_dev *pd
 		goto release_pools;
 	}
 
-	kref_init(&dev->kref);
 	result = nvme_dev_add(dev);
 	if (result)
 		goto shutdown;

Re: [PATCH 3.14 00/84] 3.14.54-stable review

[Shuah Khan]

On 09/29/2015 09:17 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.54 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Oct  1 14:52:55 UTC 2015.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.14.54-rc1.gz
> and the diffstat can be found below.
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah


-- 
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978

Re: [PATCH 3.14 00/84] 3.14.54-stable review

[Greg Kroah-Hartman]

On Tue, Sep 29, 2015 at 10:53:49AM -0600, Shuah Khan wrote:
> On 09/29/2015 09:17 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.14.54 release.
> > There are 84 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Thu Oct  1 14:52:55 UTC 2015.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.14.54-rc1.gz
> > and the diffstat can be found below.
> > 
> 
> Compiled and booted on my test system. No dmesg regressions.

Thanks for testing both of these and letting me know.

greg k-h

Re: [PATCH 3.14 00/84] 3.14.54-stable review

[Guenter Roeck]

On 09/29/2015 08:17 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.54 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Oct  1 14:52:55 UTC 2015.
> Anything received after that time might be too late.
>

Build results:
	total: 127 pass: 127 fail: 0
Qemu test results:
	total: 80 pass: 80 fail: 0

Details are available at http://server.roeck-us.net:8010/builders.

Guenter

Re: [PATCH 3.14 00/84] 3.14.54-stable review

[Greg Kroah-Hartman]

On Tue, Sep 29, 2015 at 02:15:27PM -0700, Guenter Roeck wrote:
> On 09/29/2015 08:17 AM, Greg Kroah-Hartman wrote:
> >This is the start of the stable review cycle for the 3.14.54 release.
> >There are 84 patches in this series, all will be posted as a response
> >to this one.  If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Thu Oct  1 14:52:55 UTC 2015.
> >Anything received after that time might be too late.
> >
> 
> Build results:
> 	total: 127 pass: 127 fail: 0
> Qemu test results:
> 	total: 80 pass: 80 fail: 0
> 
> Details are available at http://server.roeck-us.net:8010/builders.

thanks for testing these and letting me know.

greg k-h

Re: [PATCH 3.14 00/84] 3.14.54-stable review

[Sudip Mukherjee]

On Tue, Sep 29, 2015 at 05:17:52PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.54 release.
> There are 84 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Oct  1 14:52:55 UTC 2015.
> Anything received after that time might be too late.
Compiled and booted on x86_32. No errors in dmesg.

regards
sudip

Re: [PATCH 3.14 00/84] 3.14.54-stable review

[Greg Kroah-Hartman]

On Wed, Sep 30, 2015 at 11:23:30AM +0530, Sudip Mukherjee wrote:
> On Tue, Sep 29, 2015 at 05:17:52PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.14.54 release.
> > There are 84 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Thu Oct  1 14:52:55 UTC 2015.
> > Anything received after that time might be too late.
> Compiled and booted on x86_32. No errors in dmesg.

Thanks for testing both of these and letting me know.

greg k-h

Re: [PATCH 3.14 00/84] 3.14.54-stable review

[Kevin Hilman]

On Fri, Oct 2, 2015 at 3:36 PM, kernelci.org bot <bot@kernelci.org> wrote:
> stable-queue boot: 200 boots: 0 failed, 197 passed with 3 conflicts (v3.14.54)
>
> Full Boot Summary: http://kernelci.org/boot/all/job/stable-queue/kernel/v3.14.54/
> Full Build Summary: http://kernelci.org/build/stable-queue/kernel/v3.14.54/
>
> Tree: stable-queue
> Branch: local/linux-3.14.y.queue
> Git Describe: v3.14.54
> Git Commit: 1230ae0e99e05ced8a945a1a2c5762ce5c6c97c9
> Git URL: git://server.roeck-us.net/git/linux-stable.git
> Tested: 50 unique boards, 17 SoC families, 22 builds out of 141
>
> Conflicting Boot Failures Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)

These conflicts are a known bootloader issue in the failing lab.

Kevin