From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Mathias Nyman Subject: [PATCH 4.1 153/202] usb: Use the USB_SS_MULT() macro to get the burst multiplier. Date: Sat, 17 Oct 2015 18:58:56 -0700 Message-Id: <20151018014908.895083429@linuxfoundation.org> In-Reply-To: <20151018014901.946875729@linuxfoundation.org> References: <20151018014901.946875729@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15 Sender: linux-kernel-owner@vger.kernel.org List-ID: 4.1-stable review patch. If anyone has any objections, please let me know. ------------------ From: Mathias Nyman commit ff30cbc8da425754e8ab96904db1d295bd034f27 upstream. Bits 1:0 of the bmAttributes are used for the burst multiplier. The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7 into use. Use the existing USB_SS_MULT() macro instead to make sure the mult value and hence max packet calculations are correct for USB3.1 devices. Note that burst multiplier in bmAttributes is zero based and that the USB_SS_MULT() macro adds one. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -112,7 +112,7 @@ static void usb_parse_ss_endpoint_compan cfgno, inum, asnum, ep->desc.bEndpointAddress); ep->ss_ep_comp.bmAttributes = 16; } else if (usb_endpoint_xfer_isoc(&ep->desc) && - desc->bmAttributes > 2) { + USB_SS_MULT(desc->bmAttributes) > 3) { dev_warn(ddev, "Isoc endpoint has Mult of %d in " "config %d interface %d altsetting %d ep %d: " "setting to 3\n", desc->bmAttributes + 1, @@ -121,7 +121,8 @@ static void usb_parse_ss_endpoint_compan } if (usb_endpoint_xfer_isoc(&ep->desc)) - max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) * + max_tx = (desc->bMaxBurst + 1) * + (USB_SS_MULT(desc->bmAttributes)) * usb_endpoint_maxp(&ep->desc); else if (usb_endpoint_xfer_int(&ep->desc)) max_tx = usb_endpoint_maxp(&ep->desc) *